Loading...
HomeMy WebLinkAboutContract 47015 (2)234 Q/ RECEIVED SEP 17 2015 b,, Of FORT WORTH GIV SECRETARY 9 CITY OF F RT WORTH, TEXAS N b `D'ARD AGREEMENT FOR ENGINEERING RELATED DESIGN SERVICES This AGREEMENT is between the City of Fort Worth, a Texas home -rule municipality (the "CITY"), and Tank Industry Consultants, Inc., authorized to do business in Texas, (the ' ENGINEER"), for a PROJECT generally described as: Sun Country Elevated Storage Tank Rehabilitation Project. Article Scope of Services A. The Scope of Services is set forth in Attachment A. Article 11 Compensation The ENGINEER's compensation shall be in the amount of $150,600.00 as set forth in Attachment B. Article I11 Terms of Payment Payments to the ENGINEER will be made as follows: Invoice and Payment (1) The Engineer shall provide the City sufficient documentation, including but not limited to meeting the requirements set forth in Attachment D to this AGREEMENT, to reasonably substantiate the invoices. (2) The ENGINEER will issue monthly invoices for all work performed under this AGREEMENT. Invoices are due and payable within 30 days of receipt. (3) Upon completion of services enumerated in Article I, the final payment of any balance will be due within 30 days of receipt of the final invoice. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 1 of 16 OFFIci. eiECORD CITY SECRETARY ET. WORTH, TX (4) In the event of a disputed or contested billing, only that portion so contested will be withheld from payment, and the undisputed portion will be paid. The CITY will exercise reasonableness in contesting any bill or portion thereof. No interest will accrue on any contested portion of the billing until mutually resolved. (5) If the CITY fails to make payment in full to ENGINEER for billings contested in good faith within 60 days of the amount due, the ENGINEER may, after giving 7 days' written notice to CITY, suspend services under this AGREEMENT until paid in full. In the event of suspension of services, the ENGINEER shall have no liability to CITY for delays or damages caused the CITY because of such suspension of services. Article IV Obligations of the Engineer Amendments to Article IV, if any, are included in Attachment C. A. General The ENGINEER will serve as the CITY's professional engineering representative under this Agreement providing professional engineering consultation and advice and furnishing customary services incidental thereto. B Standard of Care The standard of care applicable to the ENGINEERs services will be the degree of skill and diligence normally employed in the State of Texas by professional engineers or consultants performing the same or similar services at the time such services are performed. C. Subsurface Investigations (1) The ENGINEER shall advise the CITY with regard to the necessity for subcontract work such as special surveys, tests, test borings, or other subsurface investigations in connection with design and engineering work to be performed hereunder. The ENGINEER shall also advise the CITY concerning the results of same. Such surveys, tests, and investigations shall be furnished by the CITY, unless otherwise specified in Attachment A. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 2 of 16 (2) In soils, foundation, groundwater, and other subsurface investigations, the actual characteristics may vary significantly between successive test points and sample intervals and at locations other than where observations, exploration, and investigations have been made. Because of the inherent uncertainties in subsurface evaluations, changed or unanticipated underground conditions may occur that could affect the total PROJECT cost and/or execution. These conditions and cost/execution effects are not the responsibility of the ENGINEER D. Preparation of Engineering Drawings The ENGINEER will provide to the CITY the original drawings of all plans in ink on reproducible mylar sheets and electronic files in pdf format, or as otherwise approved by CITY, which shall become the property of the CITY. CITY may use such drawings in any manner it desires; provided, however, that the ENGINEER shall not be liable for the use of such drawings for any project other than the PROJECT described herein. E Engineer's Personnel at Construction Site (1) The presence or duties of the ENGINEER's personnel at a construction site, whether as on -site representatives or otherwise, do not make the ENGINEER or its personnel in any way responsible for those duties that belong to the CITY and/or the CITY's construction contractors or other entities, and do not relieve the construction contractors or any other entity of their obligations, duties, and responsibilities, including, but not limited to, all construction methods, means, techniques, sequences, and procedures necessary for coordinating and completing all portions of the construction work in accordance with the Contract Documents and any health or safety precautions required by such construction work The ENGINEER and its personnel have no authority to exercise any control over any construction contractor or other entity or their employees in connection with their work or any health or safety precautions. (2) Except to the extent of specific site visits expressly detailed and set forth in Attachment A, the ENGINEER or its personnel shall have no obligation or responsibility to visit the construction site to become familiar with the progress or quality of the completed work on the PROJECT or to determine, in general, if the work on the PROJECT is being performed in a manner indicating that the PROJECT, when completed, will be in accordance with the Contract Documents, nor shall anything in the Contract Documents or the agreement between CITY and ENGINEER be construed as requiring City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 3 of 16 (3) ENGINEER to make exhaustive or continuous on -site inspections to discover latent defects in the work or otherwise check the quality or quantity of the work on the PROJECT. If the ENGINEER makes on -site observation(s) of a deviation from the Contract Documents, the ENGINEER shall inform the CITY. When professional certification of performance or characteristics of materials, systems or equipment is reasonably required to perform the services set forth in the Scope of Services, the ENGINEER shall be entitled to rely upon such certification to establish materials, systems or equipment and performance criteria to be required in the Contract Documents. F. Opinions of Probable Cost, Financial Considerations, and Schedules (1) The ENGINEER shall provide opinions of probable costs based on the current available information at the time of preparation, in accordance with Attachment A. (2) In providing opinions of cost, financial analyses, economic feasibility projections, and schedules for the PROJECT, the ENGINEER has no control over cost or price of labor and materials; unknown or latent conditions of existing equipment or structures that may affect operation or maintenance costs; competitive bidding procedures and market conditions time or quality of performance by third parties; quality type, management, or direction of operating personnel; and other economic and operational factors that may materially affect the ultimate PROJECT cost or schedule. Therefore, the ENGINEER makes no warranty that the CITY's actual PROJECT costs, financial aspects, economic feasibility or schedules will not vary from the ENGINEER's opinions, analyses, projections, or estimates. G. Construction Progress Payments Recommendations by the ENGINEER to the CITY for periodic construction progress payments to the construction contractor will be based on the ENGINEER's knowledge, information, and belief from selective sampling and observation that the work has progressed to the point indicated Such recommendations do not represent that continuous or detailed examinations have been made by the ENGINEER to ascertain that the construction contractor has completed the work in exact accordance with the Contract Documents; that the final work will be acceptable in all respects that the ENGINEER has made an examination to ascertain how or for what purpose the construction contractor has used the moneys paid; that title to any of the work, materials, or equipment has passed to the CITY free and clear of liens, claims, security interests, or encumbrances; or that there are not other City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 4 of 16 matters at issue between the CITY and the construction contractor that affect the amount that should be paid. Record Drawings Record drawings if required, will be prepared, in part on the basis of information compiled and furnished by others, and may not always represent the exact location, type of various components, or exact manner in which the PROJECT was finally constructed. The ENGINEER is not responsible for any errors or omissions in the information from others that is incorporated into the record drawings. I. Minority Business and Small Business Enterprise (MBE)(SBE) Participation In accord with the City of Fort Worth Business Diversity Ordinance No. 20020-12-2011, as amended, the City has goals for the participation of minority business enterprises and/or small business enterprises in City contracts. Engineer acknowledges the MBE and SBE goals established for this contract and its accepted written commitment to MBE and SBE participation. Any misrepresentation of facts (other than a negligent misrepresentation) and/or the commission of fraud by the Engineer may result in the termination of this Agreement and debarment from participating in City contracts for a period of time of not Tess than three (3) years. J. Right to Audit (1) ENGINEER agrees that the CITY shall, until the expiration of five (5) years after final payment under this contract, have access to and the right to examine and photocopy any directly pertinent books, documents, papers and records of the ENGINEER involving transactions relating to this contract ENGINEER agrees that the CITY shall have access during normal working hours to all necessary ENGINEER facilities and shall be provided adequate and appropriate work space in order to conduct audits in compliance with the provisions of this section. The CITY shall give ENGINEER reasonable advance notice of intended audits. (2) ENGINEER further agrees to include in all its subconsultant agreements hereunder a provision to the effect that the subconsultant agrees that the CITY shall, until the expiration of five (5) years after final payment under the subcontract have access to and the right to examine and photocopy any directly pertinent books, documents, papers and records of such subconsultant, involving transactions to the subcontract, and further, that the CITY shall have access during normal working hours to all subconsultant City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 5 of 16 (3) facilities, and shall be provided adequate and appropriate work space, in order to conduct audits in compliance with the provisions of this article together with subsection (3) hereof. CITY shall give subconsultant reasonable advance notice of intended audits. ENGINEER and subconsultant agree to photocopy such documents as may be requested by the CITY. The CITY agrees to reimburse ENGINEER for the cost of copies at the rate published in the Texas Administrative Code in effect as of the time copying is performed. K. INSURANCE (1) ENGINEER'S INSURANCE a. Commercial General Liability — the ENGINEER shall maintain commercial general liability (CGL) and, if necessary, commercial umbrella insurance with a limit of not less than $1,000,000 00 per each occurrence with a $2,000,000.00 aggregate. If such Commercial General Liability insurance contains a general aggregate limit, it shall apply separately to this PROJECT or location. i. The CITY shall be included as an insured under the CGL, using ISO additional insured endorsement or a substitute providing equivalent coverage, and under the commercial umbrella, if any This insurance shall apply as primary insurance with respect to any other insurance or self-insurance programs afforded to the CITY. The Commercial General Liability insurance policy shall have no exclusions by endorsements that would alter or nullify premises/operations, products/completed operations, contractual, personal injury, or advertizing injury, which are normally contained within the policy, unless the CITY approves such exclusions in writing. ii ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by the commercial general liability or commercial umbrella liability insurance maintained in accordance with this agreement. b Business Auto — the ENGINEER shall maintain business auto liability and, if necessary commercial umbrella liability insurance with a limit of not less than $1 000,000 each accident. Such insurance shall cover liability arising out of 'any auto', including owned, hired, and non -owned autos, when said vehicle is used in the course of the PROJECT. If the engineer owns no vehicles, coverage for hired or non -owned is City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 6 of 16 acceptable. ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by the business auto liability or commercial umbrella liability insurance obtained by ENGINEER pursuant to this agreement or under any applicable auto physical damage coverage. c. Workers' Compensation —ENGINEER shall maintain workers compensation and employers liability insurance and, if necessary, commercial umbrella liability insurance with a limit of not less than $100,000.00 each accident for bodily injury by accident or $100,000.00 each employee for bodily injury by disease, with $500,000.00 policy limit. i ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by workers compensation and employer's liability or commercial umbrella insurance obtained by ENGINEER pursuant to this agreement. d. Professional Liability — the ENGINEER shall maintain professional liability, a claims -made policy, with a minimum of $1,000 000.00 per claim and aggregate The policy shall contain a retroactive date prior to the date of the contract or the first date of services to be performed, whichever is earlier. Coverage shall be maintained for a period of 5 years following the completion of the contract. An annual certificate of insurance specifically referencing this project shall be submitted to the CITY for each year following completion of the contract. (2) GENERAL INSURANCE REQUIREMENTS a. Certificates of insurance evidencing that the ENGINEER has obtained all required insurance shall be delivered to the CITY prior to ENGINEER proceeding with the PROJECT. b. Applicable policies shall be endorsed to name the CITY an Additional Insured thereon, as its interests may appear. The term CITY shall include its employees, officers, officials, agents, and volunteers as respects the contracted services. c. Certificate(s) of insurance shall document that insurance coverage specified in this agreement are provided under applicable policies documented thereon City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 7 of 16 d. Any failure on part of the CITY to request required insurance documentation shall not constitute a waiver of the insurance requirements. e. A minimum of thirty (30) days notice of cancellation or material change in coverage shall be provided to the CITY. A ten (10) days notice shall be acceptable in the event of non-payment of premium. Notice shall be sent to the respective Department Director (by name), City of Fort Worth, 1000 Throckmorton, Fort Worth, Texas 76102. f. Insurers for all policies must be authorized to do business in the State of Texas and have a minimum rating of A:V or greater, in the current A.M. Best Key Rating Guide or have reasonably equivalent financial strength and solvency to the satisfaction of Risk Management. g. Any deductible or self insured retention in excess of $25,000.00 that would change or alter the requirements herein is subject to approval by the CITY in writing, if coverage is not provided on a first -dollar basis. The CITY, at it sole discretion, may consent to alternative coverage maintained through insurance pools or risk retention groups. Dedicated financial resources or letters of credit may also be acceptable to the CITY. h. Applicable policies shall each be endorsed with a waiver of subrogation in favor of the CITY as respects the PROJECT. j• The CITY shall be entitled, upon its request and without incurring expense, to review the ENGINEER's insurance policies including endorsements thereto and, at the CITY's discretion; the ENGINEER may be required to provide proof of insurance premium payments. Lines of coverage, other than Professional Liability, underwritten on a claims -made basis, shall contain a retroactive date coincident with or prior to the date of the contractual agreement The certificate of insurance shall state both the retroactive date and that the coverage is claims -made. k. Coverages whether written on an occurrence or claims -made basis, shall be maintained without interruption nor restrictive modification or changes from date of commencement of the PROJECT until final payment and termination of any coverage required to be maintained after final payments. The CITY shall not be responsible for the direct payment of any insurance premiums required by this agreement. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 8 of 16 m. Sub consultants and subcontractors to/of the ENGINEER shall be required by the ENGINEER to maintain the same or reasonably equivalent insurance coverage as required for the ENGINEER When sub consultants/subcontractors maintain insurance coverage, ENGINEER shall provide CITY with documentation thereof on a certificate of insurance. L. Independent Consultant The ENGINEER agrees to perform all services as an independent consultant and not as a subcontractor, agent, or employee of the CITY. M. Disclosure The ENGINEER acknowledges to the CITY that it has made full disclosure in writing of any existing conflicts of interest or potential conflicts of interest, including personal financial interest direct or indirect, in property abutting the proposed PROJECT and business relationships with abutting property cities. The ENGINEER further acknowledges that it will make disclosure in writing of any conflicts of interest that develop subsequent to the signing of this contract and prior to final payment under the contract. Asbestos or Hazardous Substances (1) If asbestos or hazardous substances in any form are encountered or suspected, the ENGINEER will stop its own work in the affected portions of the PROJECT to permit testing and evaluation. (2) If asbestos or other hazardous substances are suspected, the CITY may request the ENGINEER to assist in obtaining the services of a qualified subcontractor to manage the remediation activities of the PROJECT. O. Permitting Authorities - Design Changes If permitting authorities require design changes so as to comply with published design criteria and/or current engineering practice standards which the ENGINEER should have been aware of at the time this Agreement was executed, the ENGINEER shall revise plans and specifications, as required, at its own cost and expense. However, if design changes are required due to the changes in the permitting authorities' published design criteria and/or practice standards criteria which are published after the date of this Agreement which the ENGINEER could not have been reasonably aware of, the ENGINEER shall notify the CITY of such changes and an adjustment in compensation will be made through an City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 9 of 16 amendment to this AGREEMENT. P. Schedule ENGINEER shall manage the PROJECT in accordance with the schedule developed per Attachment D to this AGREEMENT. Article V Obligations of the City Amendments to Article V, if any, are included in Attachment C. A. City -Furnished Data ENGINEER may rely upon the accuracy, timeliness, and completeness of the information provided by the CITY. B Access to Facilities and Property The CITY will make its facilities accessible to the ENGINEER as required for the ENGINEER's performance of its services The CITY will perform, at no cost to the ENGINEER, such tests of equipment, machinery, pipelines, and other components of the CITY's facilities as may be required in connection with the ENGINEER's services. The CITY will be responsible for all acts of the CITY s personnel. C. Advertisements, Permits, and Access Unless otherwise agreed to in the Scope of Services, the CITY will obtain, arrange, and pay for all advertisements for bids; permits and licenses required by local, state, or federal authorities; and land, easements, rights - of -way, and access necessary for the ENGINEER's services or PROJECT construction. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 10 of 16 D. Timely Review The CITY will examine the ENGINEER's studies, reports, sketches, drawings, specifications, proposals, and other documents; obtain advice of an attorney insurance counselor, accountant, auditor, bond and financial advisors, and other consultants as the CITY deems appropriate, and render in writing decisions required by the CITY in a timely manner in accordance with the project schedule prepared in accordance with Attachment D. Prompt Notice The CITY will give prompt written notice to the ENGINEER whenever CITY observes or becomes aware of any development that affects the scope or timing of the ENGINEER's services or of any defect in the work of the ENGINEER or construction contractors. Asbestos or Hazardous Substances Release. (1) CITY acknowledges ENGINEER will perform part of the work at CITY's facilities that may contain hazardous materials, including asbestos containing materials, or conditions, and that ENGINEER had no prior role in the generation, treatment, storage, or disposition of such materials. In consideration of the associated risks that may give rise to claims by third parties or employees of City City hereby releases ENGINEER from any damage or liability related to the presence of such materials. (2) The release required above shall not apply in the event the discharge, release or escape of hazardous substances, contaminants, or asbestos is a result of ENGINEER's negligence or if ENGINEER brings such hazardous substance, contaminant or asbestos onto the project. G. Contractor Indemnification and Claims The CITY agrees to include in all construction contracts the provisions of Article IV E regarding the ENGINEER's Personnel at Construction Site, and provisions providing contractor indemnification of the CITY and the ENGINEER for contractor's negligence. H. Contractor Claims and Third -Party Beneficiaries (1) The CITY agrees to include the following clause in all contracts with construction contractors and equipment or materials suppliers: "Contractors, subcontractors and equipment and materials suppliers on the PROJECT, or their sureties, shall maintain City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 11 of 16 (3) no direct action against the ENGINEER, its officers employees, and subcontractors, for any claim arising out of, in connection with, or resulting from the engineering services performed. Only the CITY will be the beneficiary of any undertaking by the ENGINEER " (2) This AGREEMENT gives no rights or benefits to anyone other than the CITY and the ENGINEER and there are no third -party beneficiaries. The CITY will include in each agreement it enters into with any other entity or person regarding the PROJECT a provision that such entity or person shall have no third -party beneficiary rights under this Agreement. (4) Nothing contained in this section V.H. shall be construed as a waiver of any right the CITY has to bring a claim against ENGINEER I. CITY's Insurance (1) The CITY may maintain property insurance on certain pre-existing structures associated with the PROJECT. (2) The CITY will ensure that Builders Risk/Installation insurance is maintained at the replacement cost value of the PROJECT. The CITY may provide ENGINEER a copy of the policy or documentation of such on a certificate of insurance. (3) The CITY will specify that the Builders Risk/Installation insurance shall be comprehensive in coverage appropriate to the PROJECT risks. J. Litigation Assistance The Scope of Services does not include costs of the ENGINEER for required or requested assistance to support, prepare, document, bring, defend, or assist in litigation undertaken or defended by the CITY. In the event CITY requests such services of the ENGINEER this AGREEMENT shall be amended or a separate agreement will be negotiated between the parties. K. Changes The CITY may make or approve changes within the general Scope of Services in this AGREEMENT. If such changes affect the ENGINEER's cost of or time required for performance of the services, an equitable adjustment will be made through an amendment to this AGREEMENT with appropriate CITY approval. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 12 of 16 Article VI General Legal Provisions Amendments to Article VI, if any, are included in Attachment C. A. Authorization to Proceed ENGINEER shall be authorized to proceed with this AGREEMENT upon receipt of a written Notice to Proceed from the CITY. B. Reuse of Project Documents All designs, drawings, specifications documents, and other work products of the ENGINEER, whether in hard copy or in electronic form, are instruments of service for this PROJECT whether the PROJECT is completed or not. Reuse, change, or alteration by the CITY or by others acting through or on behalf of the CITY of any such instruments of service without the written permission of the ENGINEER will be at the CITY's sole risk. The CITY shall own the final designs, drawings, specifications and documents. C. Force Majeure The ENGINEER is not responsible for damages or delay in performance caused by acts of God strikes lockouts, accidents, or other events beyond the control of the ENGINEER that prevent ENGINEER's performance of its obligations hereunder. D. Termination (1) This AGREEMENT may be terminated only by the City for convenience on 30 days' written notice This AGREEMENT may be terminated by either the CITY or the ENGINEER for cause if either party fails substantially to perform through no fault of the other and does not commence correction of such nonperformance with in 5 days of written notice and diligently complete the correction thereafter. (2) If this AGREEMENT is terminated for the convenience of the City, the ENGINEER will be paid for termination expenses as follows: a.) Cost of reproduction of partial or complete studies, plans, specifications or other forms of ENGINEER'S work product; City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 13 of 16 b.) Out-of-pocket expenses for purchasing electronic data files and other data storage supplies or services; �.) The time requirements for the ENGINEER'S personnel to document the work underway at the time of the CITY'S termination for convenience so that the work effort is suitable for long time storage. (3) Prior to proceeding with termination services, the ENGINEER will submit to the CITY an itemized statement of all termination expenses The CITY'S approval will be obtained in writing prior to proceeding with termination services. Suspension, Delay, or Interruption to Work The CITY may suspend, delay, or interrupt the services of the ENGINEER for the convenience of the CITY. In the event of such suspension, delay, or interruption, an equitable adjustment in the PROJECT's schedule, commitment and cost of the ENGINEER's personnel and subcontractors, and ENGINEER's compensation will be made. F. Indemnification In accordance with Texas Local Government Code Section 271.904, the ENGINEER shall indemnify, hold harmless, and defend the CITY against liability for any damage caused by or resulting from an act of negligence, intentional tort, intellectual property infringement, or failure to pay a subcontractor or supplier committed by the ENGINEER or ENGINEER's agent, consultant under contract, or another entity over which the ENGINEER exercises control. Assignment Neither party shall assign all or any part of this AGREEMENT without the prior written consent of the other party H. Interpretation Limitations on liability and indemnities in this AGREEMENT are business u nderstandings between the parties and shall apply to all the different theories of recovery, including breach of contract or warranty, tort including n egligence, strict or statutory liability, or any other cause of action, except for willful misconduct or gross negligence for limitations of liability and sole n egligence for indemnification. Parties mean the CITY and the ENGINEER, and their officers, employees, agents, and subcontractors. City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 14 of 16 I. Jurisdiction The law of the State of Texas shall govern the validity of this AGREEMENT, its interpretation and performance, and any other claims related to it. The venue for any litigation related to this AGREEMENT shall be Tarrant County, Texas. J. Severability and Survival If any of the provisions contained in this AGREEMENT are held for any reason to be invalid illegal or unenforceable in any respect, such invalidity, illegality or unenforceability will not affect any other provision, and this AGREEMENT shall be construed as if such invalid, illegal, or unenforceable provision had never been contained herein. Articles V.F., VI.B. VI.D., VI.F., VI.H., and VI]. shall survive termination of this AGREEMENT for any cause. K. Observe and Comply ENGINEER shall at all times observe and comply with all federal and State laws and regulations and with all City ordinances and regulations which in any way affect this AGREEMENT and the work hereunder, and shall observe and comply with all orders, laws ordinances and regulations which may exist or may be enacted later by governing bodies having jurisdiction or authority for such enactment. No plea of misunderstanding or ignorance thereof shall be considered ENGINEER agrees to defend, indemnify and hold harmless CITY and all of its officers, agents and employees from and against all claims or liability arising out of the violation of any such order, law, ordinance, or regulation, whether it be by itself or its employees. Article VII Attachments, Schedules, and Signatures This AGREEMENT, including its attachments and schedules, constitutes the entire AGREEMENT, supersedes all prior written or oral understandings, and may only be changed by a written amendment executed by both parties. The following attachments and schedules are hereby made a part of this AGREEMENT: Attachment A - Scope of Services Attachment B — Compensation Attachment C - Amendments to Standard Agreement for Engineering Services Attachment D - Project Schedule City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 15 of 16 Attachment E - Location Map Executed and effective this / rday of Sep-km/X(2015. BY: CITY OF FORT WORTH • Jesus J. Chapa Assistant City Manager Date: APPROVAL RECOMMENDED: By: dity41 Jo n Robert Carman erector, Water Department BY: ENGINEER Tank Industry Consultants, Inc. gory R. "Chip" Stein, P.E. Managing Principal Date: fiyareAs 1S APPROVED AS TO FORM AND MC No.: LEGALITY By: Douglas W. Black Assistant City Attorney AT,TEST: I N_-,, _F Mary J. Kayser City Secretary City of Fort Worth, Texas Standard Agreement for Engineering Related Design Services Revised Date: 9/24/2014 Page 16 of 16 MC Date: ' Z f " / r OFFICIAL RECORD CITY SECRETARY FT. WORTH, TX TIC LANK INDUSTRY CONSULTANTS 7740 West New York Street ndianapolis, Indiana 46214 317 / 271-3100 - Phone 317 / 271-3300 - FAX Bolingbrook, Illinois 630 / 226-0745 Pittsburgh, Pennsylvania 412 / 262-1586 El Paso, Texas 915 / 790-0790 Houston, Texas 281 / 367-3511 Attachment A City Project No. 2(0Eo June 8, 2015 Christopher Harder, P.E. Engineering Manager / Water Production Fort Worth Water Department 1000 Throckmorton Street Fort Worth, Texas 76102 RE: Professional Services Associated with the Rehabilitation of the Sun Country 2,000,000 Gallon Fluted Pedestal Elevated Storage Tank TIC Reference: S465.012 Dear Mr. Harder: Tank Industry Consultants (TIC) is pleased to have been selected to provide engineering, design and professional services associated with the rehabilitation of the Sun Country Elevated Water Storage Tank. TIC performed an engineering evaluation of this tank in 1995. The tank was built by Pittsburgh-DesMoines Steel Company. We propose the fol- lowing scope of work including the evaluation of the tank, the preparation of specifica- tions for repairs and repainting, bidding assistance, and project representation during construction. This is the same general scope as was provided for the Armstrong Ranch, the Northwest and the Timberline Elevated tanks. TANK EVALUATION TIC's tank evaluation consists of a careful study of the tank's interior wet, interior dry, exterior, accessories, and visible portions of the foundation. The evaluation includes the actual on -site field evaluation, an evaluation of the roof and other structural members of the tank, a coatings evaluation, a safety and sanitary evaluation, and the submittal of a certified engineering report outlining our observations and recommendations for rehabil- itation and maintenance. TIC performs all types of tank evaluations to meet each tank owner's needs. There are currently three popular methods of evaluating tank interiors: a drained "dry" evaluation, an underwater evaluation performed by divers, and a robotic inspection. The dry evaluation is unquestionably the most thorough evaluation and is often the least costly. During a dry evaluation, the technicians get an overview of the entire tank interi- or, and can perform tests not suitable for underwater evaluations. This proposal is based on performing a dry or drained evaluation. Regardless of the type of evaluation performed, our evaluations are specially designed to uncover problems, and to look for methods to reduce rehabilitation costs. • Christopher Harder, P.E. Fort Worth Water Departrnent Att A- Page 2 June 8, 2015 FIELD EVALUATION During the field evaluation, TIC technicians access the necessary tank surfaces by rigging and rappelling the ex- terior as required by the condition of the tank to identify sanitary, safety, or structural deficiencies. While rap- pelling, the technicians look for tank irregularities to be analyzed by our engineering staff. Ultrasonic thickness measurements taken allow our engineers to analyze deviations from original thickness to determine the effect on the integrity of the tank. The exposed portions of the foundation is visually evaluated to locate cracks, spall- ing, or other types of deterioration. Coating samples and adhesion tests taken during the field evaluation provide information that is vital in deter- mining recommendations for the painting and rehabilitation of the tank. The cathodic protection system, if present, is also visually evaluated. By reviewing corrosion patterns and metal loss, the apparent working order of a cathodic protection system can be determined. At a minimum, the following items will be addressed: Measurements of the tank members will be taken Measurements of the tank accessories will be taken o Measurements of metal loss will be taken o Coating samples will be taken to determine lead, cadmium, and chromium content Coating adhesion measurements will be taken O Coating thickness measurements will be taken O Ultrasonic steel thickness measurements will be taken © Observed sanitary deficiencies will be noted o Observed safety deficiencies will be noted a Observed structural deficiencies due to deterioration will be noted a Observed irregularities or unusual circumstances will be noted • Photographs will be taken to document the condition of the tank COATING EVALUATION Coating samples will be taken during the field evaluation to be tested to determine their lead, chromium, and cadmium content. The results of the coating thickness and adhesion tests performed during the coating evalu- ation will offer insight into the viability of topcoating (overcoating) the existing coating. If the existing coating type, thickness, condition, and adhesion allow for topcoating, the cost of recoating the tank could be signifi- cantly reduced. STRUCTURAL EVALUATION TIC's evaluation and report identify any observed structural deficiencies or damage that has occurred since the tank was erected. These deficiencies could be deviations of the existing tank condition from how the tank was originally designed and constructed and/or deterioration which may have occurred (e.g. metal loss due to cor- rosion) since the construction of the tank. Any deficiencies found will be analyzed for their effects on the structural integrity of the tank. Christopher Harder, P.E. Fort Worth Water Department EVALUATION REPORT Att A- Page 3 June 8, 2015 An engineering report, certified by a Texas Licensed Professional Engineer on our fulitime staff, will be issued for the tank. This report will include the information you need to make informed decisions about tank mainte- nance, and how to meet your short-term and long-term water system needs. The report will include the fol- lowing sections: Observations: The observation section of the report provides dimensions of the tank and accessories, as well as a narrative description of the condition of each part of the tank. Sanitary, safety, security, and structural deficiencies found will be described, and an assessment of the coating condition will be included. Recommendations: The recommendations section of the report includes repairs and modifications re- quired to bring the tank into compliance with present TCEQ, AWWA and operational, safety, security, and sanitary standards. Coating recommendations will be made, as well as the recommended timing of the necessary coating repairs. When practical, alternative methods of repairs, modifications, and painting will be provided. Advantages and disadvantages of each alternative will be given so you can determine your immediate and future tank maintenance requirements. Cost life analysis and compar- ative analysis of coatings and linings are continually being performed by TIC as new products and tech- nologies are developed for the coatings and lead -paint abatement industries. With more than thirty- five years' experience specifying water tank coatings, TIC has extensive experience in determining which coatings best meet the immediate and future water tank needs. Economic Factors: The economic factors section of the report provides budget estimates for all of the repairs, modifications, and coating requirements outlined in the recommendations section of the re- port. In addition, the replacement cost of the tank is provided for cost comparison. Photographs: The report will contain color photographs of the tank. The photographs are individually mounted with captions adjacent to each photo to explain what is included in the photo. The photo- graphs serve as additional documentation of the tank's condition. WASHOUT AND DISINFECTION (DRAINED EVALUATION) We believe that a more thorough evaluation of the interior surfaces can be performed if the mud and debris are removed from the tank before a dry evaluation. TIC personnel can washout the tank if requested. TIC per- sonnel can also disinfect the tank at the conclusion of the field evaluation in accordance with AWWA C652-11. The following terms apply to the tank evaluation: 1. The tank being drained and refilled by the Fort Worth Water Department. The tank must be drained and prepared for the field evaluation on the agreed date and time. 2. The Fort Worth Water Department operating the water works system with the tank off-line without any assistance from Tank Industry Consultants. 3. The Fort Worth Water Department turning off, tagging, and locking out the power to any cathodic pro- tection system that may be installed on the tank, and returning the cathodic protection system back to its working order at the conclusion of the field work on the tank. Christopher Harder, P.E. Fort Worth Water Department Att A= Page 4 June 8, 2015 4. Performing the work when the temperature is above 35° F, the wind velocity is 15 miles per hour or less, and there is no precipitation. 5. Performing the fieldwork prior to September 1, 2015. Tank Industry Consultants will contact the Fort Worth Water Department to schedule the fieldwork when written authorization has been received. 6. The Fort Worth Water Department furnishing a ground man during the fieldwork. 7. The Fort Worth Water Department supplying TIC with all required sleeves and attachments for any ex- isting safe -climbing devices on the tank ladders, if the devices are to be tested for proper operation. 8. Representatives of the Fort Worth Water Department may not accompany TIC's personnel during the evaluation of the tank surfaces above ground level. TIC's rigging and safety equipment are intended for and are to be used only by TIC personnel. 9. The Fort Worth Water Department disinfecting the tank unless TIC is retained to perform the disinfec- tion. 10. The Fort Worth Water Department taking samples and performing all required testing prior to placing the tank in service. 11. The Fort Worth Water Department supplying water with a standard garden hose connection within 50 feet of the base of the tank, if TIC is retained to perform the washout. 12. TIC will not be responsible for the quality of the washout if the Fort Worth Water Department cannot completely valve off the tank and keep water from entering the tank. 13. Using the Fort Worth Water Department Standard Agreement with the exceptions noted in Attach- ment C thereof. Specifically included as part of this fee is the limitation of liability listed in Attachment C. 14. The Fort Worth Water Department will be invoiced when the engineering report is issued. Payment is due within 30 days. If any of these terms are not met by the Fort Worth Water Department, charges for any additional time, mile- age, per diem, interest (1-1/2% monthly), taxes, insurance or mobilizations incurred by TIC due to such failure may be invoiced. PREPARATION OF SPECIFICATIONS AND CONTRACT DOCUMENTS TIC's tank rehabilitation specifications and contract documents are project specific and more extensive than provided by most engineers due to our experience and intimate familiarity with the latest TCEQ, AWWA, NFPA, API, NACE, and SSPC standards and how they must be supplemented. Specifications will be prepared in ac- cordance with local, state, and federal laws, and all specific requirements provided by the Fort Worth Water Department. Project Consultation: Throughout the project design and execution, TIC's project team will be in direct communication with the tank owner's representatives to assure that the project specifications and contract documents fulfill their needs and requirements. Detailed Construction Cost Estimates: Tani< Industry Consultants provides budget estimates for construc- tion so the final scope of work meets your maintenance and financial goals. After all reviews are complete, TIC will revise all documents as required for final approvals and prepare a final detailed cost estimate for the pro- ject. Christopher Harder, P. E. Fort Worth Water Department Att An Page 5 June 8, 2015 Reduce Construction Costs: TIC's specifications will be prepared for the Sun Country Elevated Storage Tank to address the work that needs to be performed rather than using a generic specification. This reduces the change orders to only those items that have competitive unit prices already negotiated prior to starting the project. Our specifications will address containment and proper removal and disposal/treatment of lead -based coatings and other situations that may apply to the Sun Country Elevated Storage Tank. Our specifications are not only designed to reduce construction costs during the tank rehabilitation, but also for future tank rehabilitation. By designing out problem maintenance areas, the newly applied coating system will not only last longer, but when future maintenance is performed, the repainting will be easier and therefore less expensive. Repair and Rehabilitation Design: It is important to include specific tank upgrades in the tank repainting design. TIC has found that a specification that is only end -result oriented is not adequate when working with tank repair and repainting contractors. TIC's specific designs of the repairs provide a better finished product. Engineered solutions are vital to the successful completion of tank rehabilitation projects. Removal of Lead -Based Coatings: The removal of existing lead -based (or other heavy-metal) coatings can be a major concern in repainting projects. The method that best suits the specific requirements of TCEQ and the Sun Country Tank will be specified. Whether the project requires vacuum blasting, full containment, or even the use of a robotic blasting machine, TIC has the experience necessary to design the safe removal of lead -paint to obtain the most competitive bids possible. Once the existing coatings are removed, the spent abrasive and coating debris must be tested to determine if it must be disposed of as a hazardous material. Specific guidelines are provided in the project specifications to require strict compliance with local, state, and federal regulations for the proper handling and disposal of this waste. BIDDING SERVICES TIC assists tank owners in obtaining competitive and qualified bids. TIC will recommend a number of qualified bidders to whom the Notice to Bidders should be sent. Specializing in water storage tanks for more than thirty- six years has allowed TIC to develop a list of tank repair and repainting contractors that also specialize in water tanks. Because of these contractors' expertise, their bids are the most competitive in the industry. Bid Assistance provided by TIC includes: o Attend Pre -Bid Conferences o Respond to questions O Tabulate the bids o Review the bids Check for signatures, bonds, and insurance © Investigate the low bidder O Recommend award to the lowest and most qualified bidder Christopher Harder, P.E. Fort Worth Water Department A t A- Page 6 June 8, 2015 CONSTRUCTION PHASE SERVICES CONTRACT ADMINISTRATION Once a tank rehabilitation project begins, TIC is available to consult with and advise tank owners concerning any portion of the tank rehabilitation and repainting project. Contract administration services could include: 0 Consultation on adequacy and compliance with the project specifications Specification interpretation Attend the pre -construction and all subsequent meetings supplying typed meeting notes 0 Review all contractors' submittals and shop drawings G Review construction schedule Review and approval of materials o Prepare and assist in the negotiations of change orders and supplemental agreements G Review and approval of payment requests 0 Dispute settlement <� Public relations PROJECT REPRESENTATION DURING REHABILITATION The observation of the contractor's workmanship is one of the most important parts of a tank rehabilitation project. The best -written, most thorough specifications do not assure the project will be completed correctly. TIC's technicians are experienced in tank repair, painting, and erection. They are not only familiar with proper coating application techniques, but also with the underlying reasons for tank painting standards. Our entire staff of civil, structural, chemical, and mechanical engineers and experienced support personnel, including our MACE Certified Field Services Manager and Field Supervisors, are available to provide support on each project. During Resident Project Representation, TIC's field technician is on -site, monitoring the contractor whenever work is being performed. This type of coating observation provides the most thorough and conclusive project representation. Coatings are very sensitive to atmospheric conditions. Humidity, dew point, air, and steel temperatures must all be within acceptable ranges during application and curing for coating systems to achieve maximum life. Without a resident technician on the site to monitor these conditions, the tank owner is putting their faith in the contractor that work will be suspended when the atmospheric conditions warrant. Evidence of the applica- tion of the coating under adverse atmospheric conditions may be a premature failure two or three years later. The role of TIC's on -site project representatives is to provide both a visual and documentation inspection trail that verifies that the client receives the level of quality and product service life they are paying the contractor to provide. The resident technician is on -site to: 0 point out and document deficiencies in the contractor's work, so the contractor makes corrections and improvements as the work progresses. © document the contractor's daily performance to support invoice approval or any action the owner may wish to take against the contractor. o confirm that the contractor has taken the necessary steps to protect the owner from liability by testing and properly disposing of spent blast abrasive. Christopher Harder, P.E. Fort Worth Water Department Att A- Page 7 June 8, 2015 • confirm that the contractor is complying with job site posting requirements. • quickly resolve any technical questions or changes that may arise to minimize or eliminate delays and/or contractor claims. • document weather and other jobsite conditions to assess contractor claims for additional time or money. • document any jobsite visits from state or federal agencies such as OSHA or the EPA. • facilitate cost-effective solutions to issues that can arise during the construction phase of the tank re- habilitation project. Daily Progress Reports: TIC's technician will furnish the Fort Worth Water Department and the contractor with a written report for each day's evaluation. The reports will address, at a minimum, the following items: • Temperature of steel • • • • • • • • • • • Weather conditions o Temperature o Wind velocity and direction o Relative humidity o Dew point Location and quality of work performed and compliance with the project documents Paint batch numbers Surface profile Wet and dry film thickness readings Calibration record of dry mil thickness gauge Measure of the paint cure Number of men and equipment on the job Recommendations made Estimated completion date Other pertinent data as required or requested Environmental Impact: TIC is very concerned about the environmental impact of the tank rehabilitation pro- ject we are involved in, and is dedicated to complying with environmental regulations. If required, we will have TCLP tests performed by the contractor on the blasting debris to determine if it is hazardous and requires spe- cial handling and disposal. Soil samples will be taken from carefully plotted locations on and around the tank site prior to the start of the cleaning and painting project. This testing will provide background samples that can be tested and compared with samples taken from the same locations at the project s conclusion. This be- fore and after sampling and testing will help to gauge the impact the project had on the environment and n eighboring property, and will help protect the Fort Worth Water Department from claims for pollution which e xisted before the project started Holiday Testing Once the interior coating application is completed, Tank Industry Consultants observes the contractor's holiday testing of the interior surfaces. Final Observation/Walk Through: TIC recommends that a final evaluation be performed when each tank project is completed. At the final evaluation, TIC's field technician or field supervisor will accompany the con- tractor for a final review of the project. A punch list of items that need remedied or completed is prepared and provided to the tank owner and the contractor. If required, TIC observes the completion of the punch list. Christopher Harder, Po E. Fort Worth Water Department A tt An Page 8 June 8, 2015 FIRST ANNIVERSARY EVALUATION Present AWWA Standards recommend that all water tank construction and painting projects have a bonded warranty following the project completion date. Approximately eleven months after the completion of the tank rehabilitation project, TIC will perform a First Anniversary Evaluation of the contractor's workmanship. This evaluation focuses on the contractor's compliance with the project specifications and drawings, and the coating condition. This evaluation will take one day on site. A report on the condition of the tank and the con- tractor's workmanship will be issued. The report will contain photographs taken during the field evaluation. SUBCONTRACTORS TIC anticipates subcontracting the following services to minority -owned businesses in order to meet the City's M/SBE contracting goal of 12%: o Laboratory analysis of paint samples to determine their content of regulated heavy metals o Laboratory analysis of soil samples to determine their content of contaminants O Uploading of Construction Documents to Buzzsaw ® Preparation of record drawings TIME & EXPENSE TIC's time and expenses for this project will be invoiced in accordance with Attachment B of the Agreement using the rates in affect at the time the work is performed. Our current rates (2015) are attached. We antici- pate rate increases of approximately 3% to 5% from 2015 to 2016. Mileage will be invoiced from TIC's closest office to the site. For this project that office is in The Woodlands, Texas on the north side of Houston. We estimate billings on a time and expense basis in accordance with Attachment B to the Agreement will be as follows: Evaluation Preparation of Detailed Technical Specifications Bidding Assistance Contract Administration Project Representation First Anniversary Evaluation Total $ 8,700 $ 13,000 $ 2,5001 $ 26,7002 $ 94,0003 $ 5,700 $150,600 1 Attendance at a Pre -Bid meeting and the Bid Opening was not required, therefore we have not included those services in this estimate. 2 Contract Administration includes estimated subcontract costs for uploading documents to Buzzsaw and for laboratory analysis of regulated heavy metals in paint chips, blasting debris and soils at the site. 3 The contractor's construction methodology and work force allotment will greatly impact the inspection hours and costs for Project Representation. A minimal amount of time may be charged for the field technician's preparation of documentation in addition to on -site time. Christopher Harder, P.E. Fort Worth Water Department Att A- Page 9 June 8, 2015 We look forward to working with you on this Sun Country Elevated Tank Rehabilitation Project. If you have any questions or need additional information, please contact me. Sincerely, Tank Industry Consultants Ray Penny Manager, Southwest Region cc Gregory R. "Chip" Stein, P.E. —TIC, Indianapolis Julie White — TIC, Indianapolis ATTACHMENT B COMPENSATION Design Services for Sun Country Elevated Tank Rehabilitation Project City Project No. 2G i Time and Materials with Multiplier Project Compensation A. The ENGINEER shall be compensated for personnel time, non -labor expenses, and subcontract expenses in performing services enumerated in Attachment A as follows: i. Personnel Time. Personnel time shall be compensated based upon hours worked directly in performing the PROJECT multiplied by Direct Salaries multiplied by a factor of 2.31 (2 21 cost reoverry plus profit multiplier of 10%1 Direct Salaries are the amount of wages or salaries paid to ENGINEER's employees for work directly performed on the PROJECT, exclusive of all payroll - related taxes, payments, premiums, and benefits. ii. Non -Labor Expenses. Non -labor expenses shall be reimbursed as Direct Expenses at invoice or internal office cost. Direct Expenses (non -labor) include, but are not limited to, mileage, travel and lodging expenses mail, supplies, printing and reproduction services, other direct expenses associated with delivery of the work, plus applicable sales, use, value added, business transfer gross receipts, or other similar taxes. iii. Subcontract Expenses. Subcontract expenses and outside services shall be reimbursed at cost to ENGINEER plus a markup of ten percent (10%). iv. Budgets ENGINEER will make reasonable efforts to complete the work within the budget and will keep the City informed of progress toward that end so that the budget or work effort can be adjusted if found necessary. ENGINEER is not obligated to incur costs beyond the indicated budgets, as may be adjusted, nor is the City obligated to pay ENGINEER beyond these limits. If ENGINEER projects, in the course of providing the necessary services, that the PROJECT cost presented in Article 2 of this Agreement will be exceeded, whether by change in scope of the project, increased costs or other conditions, the ENGINEER shall immediately report such fact to the City and, if so instructed by the City, shall suspend all work hereunder. When any budget has been increased, ENGINEER's excess costs expended prior to such increase will be allowable to the same extent as if such costs had been incurred after the approved increase. City of Fort Worth, Texas Attachment B PMO Official Release Date: 5.19.2010 Page 1 of 4 B-1 ATTACHMENT B COMPENSATION B. The ENGINEER shall be paid monthly payments as described in Section II Method of Payment. Il. Method of Payment A. The ENGINEER shall be paid by the City based upon an invoice created on the basis of statements prepared from the books and records of account of the ENGINEER, based on the actual hours and costs expended by the ENGINEER in performing the work. Each invoice shall be verified as to its accuracy and compliance with the terms of this Agreement by an officer of the ENGINEER C. ENGINEER shall prepare and submit invoices in the format and including content as presented in Exhibit B-1. D. Payment of invoices will be subject to certification by the City that such work has been performed. III. Progress Reports A. The ENGINEER shall prepare and submit to the designated representative of the Water Department monthly progress reports and schedules in the format required by the City, City of Fort Worth, Texas Attachment B PMO Official Release Date: 5.19,2010 Page 2 of 4 B-2 I V. ATTACHMENT B COMPENSATION Summary of Estimated Total Project Fees Firm Prime Consultant Tank Industry Consultants Primary Responsibility Engineering Services Proposed M/WBE SubnConsultants James DeOtte Engineering, Inc. TTI Environmental Laboratories NonaM/SBE Consultants Project Number & Name Sun Country Elevated Tank Rehabilitation Project City M/SBE Goal - 12% City of Fort Worth, Texas Attachment 8 PMO Official Release Date: 5.19.2010 Page 3of4 Construction document controls using Buzzsaw, and preparation of record drawings Laboratory testing of coating samples, soil samples, and spent abrasive blasting debris TOTAL Total Fee $150,600 Fee Amount 132,600 88.0 17,450 11.6 550 0.4 $150,600 100% SBE Fee 18,000 Consultant Committed Goal - 12 SBE % 120% B-3 EXHIBIT ` 134" ENGINEER INVOICE (Supplement to Attachment B) Insert required invoice format following this page, including negotiated total budget and allocations of budgets across work types and work phases City of Fort Worth, Texas Attachment B PMO Official Release Date: 5.19.2010 Page 4 of 4 Tank Industry Consultants 7740 West New York Street Indianapolis, Indiana 46214 Professional Services 2015 Rate Range with Overhead Multiplier Effective January 1, 2015 through December 31, 2015 Lon ' -Term Resident Observation Technician (travel and on job time) Overtime (over 40 hrs/week) Minimum 32 hours per week Per Diem $22-36 per hour $ 3 3 -5 5 per hour $135-175 per day S • of Observation Technician (travel and on job time) Per Diem Support Staff One Hour Senior Registered Engineer $22-36 per hour $145-179 per day with lodging Hourly Rates Shown Below En e ' • • ' i ' and Su . s ort Staff Field Services Manager/Contract Administrator Field Superintendent/NACE Certified Technician Project Manager Engineer - E.I. Registered Engineer Senior Registered Engineer Principal Engineer Senior Principal Engineer Technical Editor Clerical Direct Ex I enses $34-56 $32-46 $32-54 $30-38 $36-54 $47-54 $47-60 $94-102 $38-46 $14-34 per hour per hour per hour per hour per hour per hour per hour per hour per hour er hour • A charge of $11.25 per hour is added for every office hour worked to cover copying, fax, mail, telephone, long distance, paging, cell phone, trucks, field equipment, and other miscellaneous costs. Milea : e • $0.82 per mile per vehicle from nearest office Indianapolis, IN • Pittsburgh, PA • Houston, TX • Plainfield, IL • El Paso, TX • 2.31% Subcontract Laboratory Analysis ees are doubled for rush service • • • Total Lead in Samples by Atomic Absorption Spectroscopy Total Metals (Cadrmum, Chromium & Lead) in Samples by Atomic Absorp- tion Spectroscopy Leachable Lead in Samples by Toxicity Characteristic Leaching Procedure $125.00 per sample $257.50 per sample $527.00 per sample ATTACHMENT "C" CHANGES AND AMENDMENTS TO STANDARD AGREEMENT Design Services for Sun County Elevated Tank Rehabilitation Project City Project No. 2659 Article IV. D. Prenaration of Engineering Drawings TIC uses CAD programs to prepare drawings for tank rehabilitation projects and most are 8.5 X 11 inches for inclusion in the contract documents. TIC does not produce drawings with pen and ink or on Mylar. TIC holds that the documents it will prepare for this project are "instruments of service" and that ownership of those documents remains with TIC. We agree that the CITY may make and keep copies; however we do not agree that ' the CITY may use such drawings in any manner it desires '. To help reduce unauthorized use and dissemination of our work, our policy has been to provide prints of all documents rather than electronic pdf files. P lease replace 'the original drawings of all plans in ink on reproducible mylar sheets and in electronic pdf format" in the first and second lines with "prints of all drawings prepared for the PROJECT". Please also add and the CITY shall to the extent allowed by law indemnify and hold harmless the ENGINEER from all claims, damages, losses, expenses, and costs, including attorneys fees arising out of or resulting from the CITY's reuse of said drawings without the ENGINEER's specific consent" after "described herein" in the last line. Article IV. K, Insurance. (11, a Commercial General Liability P lease change `Commercial" to "Comprehensive" wherever it appears. Article IV. K. Insurance. (11, b Business Auto P lease change `commercial" to ' comprehensive" in the second line. Article IV, K Insurance (1), D. Professional Liability Please change "5 years" to "3 years" in the filth line Article VI. B. Reuse of Project Documents P lease add "and the CITY shall, to the extent allowed by law, indemnify and hold harmless the ENGINEER from all claims damages, losses, expenses, and costs, including attorneys' fees arising out of or resulting from the reuse of said documents without the ENGINEER's specific consent" after "sole risk" in the sixth line. Article VI. F. Indemnification TIC's insurance program provides coverage under Comprehensive General Liability for defense obligations of indemnities, but may not provide defense coverage in regards to Professional Liability. Please insert "and" after `indemnify" and delete "and defend' in the second line. City of Fort Worth, Texas Attachment C PMO Release Date: 05.19.2010 Page 1 of 2 Please also add "ENGINEER's liability will be limited that portion of negligence of the ENGINEER compared to the total negligence of all persons firms, or corporations which results in said damages to the CITY The ENGINEER shall not be liable for any consequential damages. The ENGINEER's fees and the ENGINEER's proposal to the CITY are based upon the total liability to the ENGINEER not exceeding $50,000 or the contract amount, whichever is greater" at the end of the last line. Article VI, K. Observe and Comply Please delete ` defend, " in the seventh line and add " however ENGINEER's liability will be limited to that portion of negligence of the ENGINEER compared to the total negligence of all persons, firms, or corporations which results in said damages to the CITY, its officers, agents and employees. The ENGINEER's fees and the hNGINEER's proposal to the CITY are based upon the total liability to the ENGINEER not exceeding $50,000 or the contract amount, whichever is greater." City of Fort Worth, Texas Attachment C PMO Release Date: 05.19,2010 Page 2 of 2 Attachment D TIC Schedule Sun Country Elevated Water Storage Tank Rehabilitation Project # Fort Worth Water Department Task / Event TIC-FWWD Contract Signing Field Evaluation of Tank Prep/Submit Evaluation Report Duration (wks) Start 2 days 4 FWWD Review Report Prep/Submit draft DTS 4 FWWD Review DTS Prep/Submit Final DTS 2 FWWD Adertise Bid 3 TIC Review Bids & Recommend Award 1 Notice of Award 1 Contractor ins, bonds & contract 3 Pre -Construction Conf & Notice To Proceed Tank Rehabilitation Completion 1 Day 18* End Comments Probable Schedule TIC wil schedule a drained evauation of the tank as soon as the contract is executed. If needed, TIC can expedite to 3 weeks Owner dependent - normally 2 weeks Owner dependent - normally 2 weeks Shorter if owner comments are minor Owner dependent Owner dependent Early Sep 2016 Mid Sept 2015 Mid Oct 2015 Late Oct 2015 Late Nov 2015 Early Dec 2015 Mid Dec 2015 Mid Dec 2015 Early Jan 2016 Early Feb 2016 Normally takes at least a couple of weeks Late Feb 2016 Owner dependent * Only a guess until evaluation is performed and scope of rehab work is defined. Late Feb 2016 Mar thru Jun 2016 Early July 2016 Major repairs will extend. FORT WORTH ATTACHMENT "E" - WATERSUN COUNTRY TANK REHABILITATION PROJECT N Sun Country 2 MG Elevated Storage Tank 5800 W. Stewart Feltz Road C D ACO,rRO® CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) 8/27/2015 THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). PRODUCER MJ Schuetz Insurance Services 55 Monument Circle, Suite 500 Indianapolis IN 46204 INSURED Tank Industry Consultants, Inc 7740 West New York Street Indianapolis IN 46214-2988 TANKI-1 CONTACT NAME: Tessa Russell (Arc."No. ern:317-639-5679 E-MAIL INSURER(S) AFFORDING COVERAGE INSURER A :Cincinnati Insurance Company INSURER B .Rockhill Insurance. INSURER c :Granite State Insurance Co. INSURER D :Crum & Forster Specialty Ins INSURER E : INSURER F : I No1:317-639-6910 NAIC # k0677 8053 3809 44520 COVERAGES CERTIFICATE NUMBER' 325231616 REVISION NUMBER* THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSR 'ADDL SUBR POLICY EFF POLICY EXP LTR INSR WVD POLICY NUMBER (MM/DDYYY1 (MM/DD/YYYY) LIMITS TYPE OF INSURANCE /Y D GENERAL LIABILITY Y Y EPK105592 10/1/2014 10/1/2015 X COMMERCIAL GENERAL LIABILITY CLAIMS -MADE X OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY IX PFRR? I LOC A AUTOMOBILE LIABILITY X ANY AUTO ALL OWNED AUTOS X HIRED AUTOS B X UMBRELLA LIAB X EXCESS LIAB I DED I I RETENT ON $ WORKERS COMPENSATION AND EMPLOYERS' LIABILITY ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory in NH) If yes, describe under DESCRIPTION OF OPERATIONS below Professional Liability Retro Date 03/29/91 Pollution - Retro 10/01/13 SCHEDULED AUTOS NON -OWNED AUTOS OCCUR CLAIMS -MADE Y/N N N/A Y EBA 0212027 Y 10/1/2014 10/1/2015 RXLSR0000468 10/1/2014 10/1/2015 WC003957699 EPK105592 10/1/2014 10/1/2015 10/1/2014 10/1/2015 EACH OCCURRENCE $5,000,000 DAMAGE TO RENTED PREMISES (Ea occurrence) $50,000 MED EXP (Any one person) $5,000 I PERSONAL & ADV INJURY I $5,000,000 GENERAL AGGREGATE I $5,000,000 PRODUCTS - COMP/OP AGG I $5,000,000 Employee Benefits $1,000,000 GUMUI NED SINGLt LIMI I (Ea accident) $1,000.000 BODILY INJURY (Per person) $ BODILY INJURY (Per accident) $ PROPERTY DAMAGE (Per accident) EACH OCCURRENCE AGGREGATE WC STATU- OTH- E.L. EACH ACCIDENT E.L. DISEASE - EA EMPLOYE E.L. DISEASE - POLICY LIMIT Limit Ded/Each Claim Pollution Limit/Ded Is $ $4000000 $ $ $1,000,000 $1,000,000 $1,000,000 5,000,000 5,000 5,000,000/25,000 DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (Attach ACORD 101, Additional Rema ks Schedule, if more space is required) Excess Policy with Rockhill - Underlying Policies are Automobile Liability and Employers Liability. The City/of Forth Worth and Its employees, officers, officials, agents and volunteers are shown as additional insured under General Liability per forms EN0118 0211 and EN0111 0211. Waiver of subrogation applies to General Liability per form EN0118 0211, Automobile per form AA4172 0909 and Workers Compensation per form WC420304A 0100 CERTIFICATE HOLDER City of Forth Worth 1000 Throckmorton Street Fort Worth, TX 76102 CANCELLATION SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. AUTHORIZED REPRESENTATIVE 1988-2010 ACORD CORPORATION. All rights reserved. ACORD 25 (2010/05) The ACORD name and logo are registered marks of ACORD TEXAS WAIVER OF OUR RIGHT TO RECOVER FROM OTHERS ENDORSEMENT This endorsement changes the policy to whldh it Is attached effective on the inception dale of the policy unless a different date is indicated below. (The following *attaching clause" need be completed only when this endorsement 1s Issued subsequent to preparation o16re Olt% This endorsement, effective 12:01 AM 10101 /2014 issued to TANK INDUSTRY CONSULTANTS By GRANITE STATE INSURANCE COMPANY • forms a part of Policy No. WC 00345- 7699 This endorsement applies only to the insurance provided by the policy because Texas is shown in Item 3.A. of the Information Page. We have the right to recover our payments from anyone liable for an injury covered by this policy. We will not enforce our right against the person or orgsnizatton named In the Schedule, but this waiver applies only with respect to bodily injury arising out of the operations described in the Schedule where you are required by a written contract to obtain this waiver from us. This endorsement shall not operate directly or indirectly to benefit anyone not named in the Schedule. The premium for this endorsement is shown in the Schedule. Schedule ( ) Specific Waiver (X) Blarket Waiver Any person or organization for whcm the Named Insured has agreed by written contract to furnish this waiver. 2. Operations: ANY PERSON DR ORGAN IZAT ItNN FOR WHOM YOU PERFORM WORK UNDER A WRITTEN CONTRACT THAT REQl I RES YOU TO OBTAIN THIS AGREEMENT FROM U8 THE WRITTEN CONTRACT MUST SE EFFECTIVE PRIOR TO THE DATE OF THE LOSS OCCURRENCE• SUBJECT TO FINAL AUDIT 3. Premium: The premium charge for this endorsement shall be 2.0% notion with work performed for the above person(s) or ar izaflon) arising out et the operations described. 4. Advance Premium: WC420304A (Ed. 01100) Countersigned by percent of the premium developed on payrollin con - Authorized Representative ru r . _ ©rsfer part of the FAIRFAX group THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED - OWNERS, LESSEES OR CONTRACTORS This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART CONTRACTORS POLLUTION LIABILITY COVERAGE PART SCHEDULE Name Of Additional Insured Person(s) or Organization(s) Where Required By Written Contract SECTION III —WHO IS AN INSURED within the Common Provisions is amended to include as an additional insured the person(s) or organization(s) ►ndicated in the Schedule shown above but only with respect to liability caused, in whole or in part, by "your work" for that insured which is performed by you or by those acting on your behalf ALL OTHER TERMS AND CONDITIONS OF THE POLICY REMAIN UNCHANGED. • EN0111-0211 Page 1 of 1 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. BLANKET WAIVER OF SUBROGATION - AUTO This endorsement modifies insurance provided under the following: BUSINESS AUTO COVERAGE FORM This endorsement changes the policy effective on the inception date of the policy unless another date is indi- cated below. Endorsement Effective: 10-01-2014 Named Insured: TANK INDUSTRY CONSULTANTS INC Countersigned by: Policy Number: ESA 021 20 27 (Authorized Representative) With respect to coverage provided by this endorsement, the provisions of the Coverage Form apply unless modified by the endorsement. 1. Blanket Waiver of Subrogation SECTION 1V - BUSINESS AUTO CONDI- TIONS, A. Loss Conditions, 5. Transfer of Rights of Recovery Against Others to Us is amended by the addition of the following: We waive any right of recovery we may have against any person or organization because • of payments we make for ' bodily injury" or "property damage" arising out of the operation of a covered "auto" when you have assumed liability for such "bodily injury" or "property damage" under an "insured contract", pro- vided the "bodily injury" or "property damage" occurs subsequent to the execution of the "in- sured contract". AA 417209 09 cry ors er part of the FA[RFAX group THIS EN CHANGES TH POLICt E READ IT CAREFULLY. A5)L) NON-CONTRIRI=JTORY ADDITIONAL 'AL 'IV OF SUBROGATION This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART CONTRACTORS POLLUTION LIABILITY COVERAGE PART ERRORS AND OMISSIONS LIABILITY COVERAGE PART THIRD PARTY POLLUTION LIABILITY COVERAGE PART SCHEDULE Name of Additional Insured Person(s) or Organization(s) Where Required by Written Contract A. SECTION Ifl © WHO IS AN INSURED within the Common Provisions is amended to include as an additional insured the person(s) or organization(s) indicated in the Schedule shown above, but solely with respect to "claims" caused in whole or in part, by "your work" for that person or organization performed by you, or by those acting on your behalf. This insurance shall be primary and noncontributory, but only in the event of a named insured's sole negligence. B. We waive any right of recovery we may have against the person(s) or organization(s) indicated in the Schedule shown above because of payments we make for "damages" arising out of "your work" performed under a designated project or contract with that person(s) or organization(s), C. This Endorsement does not reinstate or increase the Limits of Insurance applicable to any "claim" to which the coverage afforded by this Endorsement applies. ALL OTHER TERMS AND CONDITIONS OF THE POLICY REMAIN UNCHANGED! • • • i c • • 1 • ENOIIS-0211 Pagel of M&C Review Page 1 of 3 CITY COUNCIL AGENDA DATE: a. al ;; a of the ay o For:_ mitt:. Ta FORT111.14.3gni COUNCIL ACTION: Approved on 8/25/2015 - Resolution No. 4502-08-2015 8/25/2015 REFERENCE NO.: **C 27432 CODE° C TYPE: SUBJECT: LOG NAME: PUBLIC HEARING: Authorize Execution of an Engineering Agreement with Tank Industry Consultants, Inc., in the Amount of $150,600.00 for the Sun Country Elevated Storage Tank Rehabilitation Project Located at 5800 W. Stewart Feltz Road and Adopt Reimbursement Resolution (COUNCIL DISTRICT 6) 60SUN COUNTRY EST REHAB CONSENT NO RECOMMENDATION: It is recommended that the City Council: 1. Authorize execution of an Engineering Agreement with Tank Industry Consultants, Inc., in the amount of $150,600.00 for the Sun Country Elevated Storage Tank Rehabilitation Project located at 5800 W. Stewart Feltz Road; and 2. Adopt the attached resolution expressing its official Intent to Reimburse expenditures with proceeds of future debt for the Sun Country Elevated Storage Tank Rehabilitation Project. DISCUSSION: The Sun Country storage tank was constructed in 1990. It is a two million gallon, all steel hydro -pillar elevated tank which has never been re -painted. This elevated tank provides potable water storage and fire protection for areas in south Fort Worth. The existing coating system is in need of replacement as required to protect the structural steel from corrosion. On February 12, 2015, a Request for Proposals was issued for several Water Department projects including the Sun Country Elevated Storage Tank Rehabilitation Project. On March 13, 2015, a total of five proposals were received from engineering consultants. A Staff consultant selection committee recommended Tank Industry Consultants, Inc , for the Sun Country Elevated Storage Tank Rehabilitation Project. As part of the work, Tank Industry Consultants, Inc., will test the existing coatings for heavy metals and perform a structural inspection of the tank A preliminary design report recommending existing coating removal and disposal methods, structural repairs and proposed coating system will be prepared. Upon approval of this design report the engineer will prepare plans, specifications and cost estimates; provide bidding assistance; and perform the construction management and on -site inspection for the rehabilitation project. It is anticipated that design and preparation of bidding documents will be completed in late Fall 2015 with bidding, award and construction to occur in 2016. This project will have no impact on the Water Department's operating budget. Upon approval of this M&C, appropriations for the Sun Country Elevated Storage Tank Rehabilitation Project will consist of the following* II 1 http://apps.cfwnet org/council_packet/mc review.asp?ID=21303&councildate=8/25/2015 8/26/2015 ivf&C Review Page 2 of 3 Fund Existing Additional Revised Appropriations Appropriations Appropriations 2017 Water and Sewer Revenue Bonds Capital $0.00 $150,600.00 $150,600.00 Project Fund (P266) Project Total 11 $0.00 II $150,600.00 II $150,600.00 Encumberances Remaining and Balance Expenditures $0.00 $150,600.00 $0.00 II $150,600.00 This project is anticipated to be included in a future revenue bond issue for the Water and Sewer Fund. Available cash within the Water and Sewer portfolio and the City's portfolio along with the appropriation authority authorized under the Direct Purchase Note Program will be used to provide interim financing for this project until debt is issued. To the extent resources other than the Water and Sewer portfolio are used to provide interim financing, the Water and Sewer Fund will be charged interest that is equivalent to the overall rate of return being earned by the City portfolio (currently approximately one -percent annually). Should the City's portfolio not support the liquidity needed to provide an interim short-term financing source, another funding source will be required, which could mean issuance of securities under the Direct Purchase Note Program or earlier issuance of Water and Sewer revenue bonds than is currently planned Once debt associated with this project is sold, bond proceeds will be used to reimburse the Water and Sewer portfolio and the City's portfolio in accordance with the attached Reimbursement Resolution. In accordance with the provisions of the Financial Management Policy Statements, Staff anticipates presenting revenue -supported debt issuances to the City Council for consideration within the next three years. The Financial Management Services Department is currently working with all departments to ensure that multi -year capital improvements plans are in place. Newly developed and already existing plans, such as the Water Department's current multi -year capital improvement plan will be presented to City Council for review and adoption. If the City Council -adopted plan does not include issuance of debt for this specific project, the project will be funded utilizing pay -as -you go financing sources. If the City Council -adopted plan calls for debt issuance, that debt must be issued within approximately three years to provide reimbursement for these expenses. If that does not occur, the costs will no longer be reimbursable by issuing tax-exempt debt and the funding source will have to be made whole through other budgetary methods. Adoption of this resolution does not obligate the City to sell bonds, but preserves the ability to reimburse the City from tax-exempt bond proceeds. M/WBE OFFICE - Tank Industry Consultants Inc., is in compliance with the City s BDE Ordinance by committing to 12 percent SBE participation. The City's goal on this project is 12 percent. The project is located in COUNCIL DISTRICT 6. FISCAL INFORMATION/CERTIFICATION: • The Financial Management Services Director certifies that appropriations are available as directed by M&C G -18375 in the 2017 Water and Sewer Revenue Bonds Capital Project Fund for this contract as depicted in the table below: Fund Available Appropriation Transfer Amount Remaining Available Appropriation http.//apps.cfwnet.org/council_packet/mc review.asp?ID=21303&councildate=8/25/2015 8/26/2015 iv1&C Review Page 3 of 3 1 2017 Water and Sewer Revenue Bonds Capital Project Fund (P266) (Project Total $48,118,523.95 $150,600.00 $48,118,523.9511 $150,600.00II 'Amount $48,967,923.95 $48,967,923.951 TO Fund/Account/Centers FROM Fund/Account/Centers P266 531200 606180265930 $1501600.00 Submitted for City Manager's Office bv: Fernando Costa (6122) Originating Department Head: John Carman (8246) Additional Information Contact: Chris Harder (8293) ATTACHMENTS 60SUN COUNTRY EST REHAB MAP.odf Sun Country Elevated Storage Tank Rehab, REIMB RESOLUTJOi.doc http://apps.cfwnet org/couneil_packet/mc_review.asp9ID=21303&councildate=8/25/2015 8/26/2015