Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Contract 59739-CO1
4 FORT �Pppp��, °F,4 Attest: FORTWORTH. CSC No. 59739-COI City Of Fort Worth Change Order Request Facility and Project Will Rogers Amon Carter Doors Description: Funding (FID) No.(s) 30205 0240450 5740010101437 000680 9999 Contractor: 1 SDB City Project Mgr. IRonnie Clements Phone Number: 1 (817) 392- 8014 City Sec No. 59739 City Proj. No. 101437 Change Order # 0 Date: 1 12/22/2023 City Superintendent I Jackson Jones Phone Number: 1817-269-6578 Contract Time (CD) Original Contract Amount ----------------------------------------------------------------------------------------------------------------------------------- 1 $690,340.00 150 1 Extrasto Date -------------------------------------------------------------------------------------------------------------------------------------------------- 1 0.00 0 1 Creditsto Date------------------------------------------------------------------------------------------------------------------------------------------------A 0.00 0 1 Pending Change Orders (in M&C Process) ------- 1 '0.00 0 1 Contract Cost to Date ---------------------------------------------------------------------------------------------------------------------------------------- 1 0,3 0.00 150 1 Amount of Proposed Change Order---------------------------------------------------------------------------------------------------------------------1 0,640.19 R0,980.19 0 1 RevisedContract Amount ----------------------------------------------------------------------------------------------------------------------------------- 1 150 1 Original Funds Available for Change Orders---------------------------------------------------------------------------------------------------------A 0.00 Remaining Funds Available for this CO----------------------------------------------------------------------------------------------------------------1 0.00 1 Additional Funding (if necessary)------------------------------------------------------------------------------------------------------------------------a '0.00 I CHANGE ORDERS to DATE (INCLUDING THIS ONE) AS % OF ORIGINAL CONTRACT 1 14.57 % 1 MAX ALLOWABLE CONTRACT AMOUNT (ORIGINAL CONTRACT COST+ 25%) 5862,925.00 1 JUSTIFICATION (REASONS) FOR CHANGE ORDER The purpose of Change Order #1 is to provide labor, materials and equipment to install new support headers. These support headers were shown to be existing on contract documents. Upon sheetrock demolition, no structural member, bracing or blocking was found. Support headers are required for installation of new doors and door frames. Upgrade 47ea Corbin Russwin exit devices to Von Duprin exit devices, add 7 additional automatic door operators along, required electrical power and electrical strikes. These are to address scope changes for Americans with Disabilities. SDB, Inc. was selected through a competitive sealed bids (M&C 23-0366, May 5, 2023). Change Order #1 ($100,640.09) increases the original amount ($690,340.00) for a revised contract amount of $790,980.19, a 14.57% increase to the original contract approved by M&C 23-0965, November 14, 2023. No additional project duration days were requested by SDB, Inc. It is understood and agreed that the acceptance of this Change Order by the contractor consitutes an accord and satisfaction and represents payment in full (both Contractor's Company Name Contractor Name Contractor Signature Date SDB, Inc. Miles Wilson i��-�- Dec 22, 2023 PMD Inspector Date Sr. Capital Projects Manager Date Dec 25, 2023 Dec 27, 2023 PMD Superintendent Date Di ector/Property Management Department Date Dec 26, 2023 � Project Manager Date Assistant City Attorney Date W (� Dec 26, 2023 LSz Jan 5, 2024 Project Architect Date Assistant City Manager Darte p Dec 27, 2023 O Wh. °__ � n, , Jan 7, 2024 M&C Number 123-0965 M&C Date Approved 11/14/2023 Contract Compliance Manager: By signing I acknowledge that I am the person responsible OFFICIAL RECORD for the monitoring and adminstration of this contract, including CITY SECRETARY Nikita Watts ensuring all performance and reporting requirements. FT. WORTH, TX Sr. Capital Projects Manager SDB, Inc. DBj GONTRAtGTIM1fG 8131 LBJ Freeway, Suite 785 II SERVICES Dallas, TX 75251 (469) 619-3753 CHANGE ORDER PROPOSAL CUSTOMER: City of Fort Worth CHANGE PROPOSAL NO.: 1 ADDRESS: 3401 W. Lancaster Ave. DATE SUBMITTED: 10/4/2023 Fort Worth, Texas 76107 SDB JOB NO.: 10-0196-00 JOB DESC.: Amon Carter Door Replacement PROPOSAL TYPE.: Lump Sum CONTACT: Jackson Jones R3 CSC/PO: 59739 / FW021-0000018224 FID: 31001-0240450-5740010-101437-000680 The following pricing is based on changes requested by owner. No changes will be done without written approval to proceed from Owner Scope of Work 1) Upgrade 47ea Corbin Russwin exit devices to 47ea Von Duprin exit devices per owner request. Corbin Russwin key system will still be used. 2) Add automatic door operators to 7 additional openings (see markup on drawing attached) per owner request. Includes door operator, power, electric strikes, and prep/repairs at wall penetrations. Owner to confirm and verify locations of door operators per attached floor plan. 3) All labor, materials, and equipment to install eight 24" x 36" non fire -rated access panels at each set of doors. Includes prep and paint for each access door. Exact locations to be confirmed and verified by the owner prior to commencement of work. If fire -rated panels are needed, there will be an add and additional lead time. Exludes any special keying requirements for access panels. 4) All labor, materials, and equipment to install new support header per architect's response to RFI #1. Tape, bed, and paint new drywall. Blend new drywall with existing soffit, paint to match existing. Minor sheetrock repairs as required. Protection of adjacent surfaces and flooring included. This price includes only the northwest and northeast foyers. Excludes the south foyers; excludes any electrical, fire protection, fire alarm work. Structural framing is excluded. 1) Panic Hardware Von Duprin Exit Devices $ 34,611.00 2) Door Operators 7ea Electric Strikes $ 4,004.00 2) Door Operators 7ea Door Operators $ 22,890.00 2) Door Operators Electrical $ 15,900.00 2) Door Operators SDB Laborer (4 hrs per opening for wall prep/repairs) $ 1,578.10 3) Access Panels Access Panels (Materials) $ 1,416.00 3) Access Panels Access Panels (Install) $ 3,880.00 3) Access Panels SDB Laborer (1.5 hrs per access panel to prep & paint) $ 450.88 4) Box Header tea Box Header $ 3,200.00 4) Box Header SDB Laborer (10 hrs per foyer for tape, bed, and paint.) $ 1,127.21 Overhead (5%) $ 4,452.86 Profit (5%) $ 4,675.50 P&P Bond $ 2,454.64 TOTAL $ 100,640.19 1) Attached submittals for Von Duprin exit devices are contingent on approval of change order from Owner. 2) Power for door operators to come from nearest source. 3) Work to be performed during normal business hours. 4) Lead time for door operators and panic hardware is minimum 6 weeks after Owner approval. 1) Permits, design, engineering. 2) Premium time unless otherwise indicated 3) Removal of Hazardous Waste 4) Unforeseen schedule setbacks due to pandemic measures 5) Expediting material is not included SDB, inc. City of Fort Worth CONTRACTOR OWNER / PRIME Mad,, o A*c ro ft 10/4/2023 SIGNATURE DATE SIGNATURE DATE M aeL l W U-3 w 10/4/2023 REVIEWED BY SDB CONFIDENTIAL CO Proposal (1) 10/4/2023 VUBH WEBB BUILDERS HARDWARE September 19, 2023 Miles Wilson SDB Contracting Reference: Amon Carter Renovation Von Duprin Exit Device request. The following cost is associated with swapping 47 Corbin Russwin Exit devices with Von Duprin Exit Devices and maintaining the Corbin Russwin key system. 35A Series Exit Devices (47) **See submittals attached** $ 32,983.00 Corbin Russwin Cores (8) Clarifications: $ 1,628.00 Total Cost: $34,611.00 LA keying meeting must be held to determine key sets before cores can be released. 2.Fire rated exit devices have been included in this pricing per the supplied door schedule. Pricing includes all applicable freight, and crating charges for additional materials. We have NOT Proceeded with these changes. Please issue a formal change order. We thank you for the opportunity. Zach Andow Web Builders Hardware 2481 Manana Drive Building A I Dallas, TX 75220 Submittal Record Submittal Date 09/19/2023 1st Revision 2nd Revision VWEIH Will Rodgers Amon Carter Renovation Door Hardware Spec Section 081113 General Contractor Project Manager Architect Distributor SDB Construction Webb Builders Hardware 2481 Manana Drive Dallas, TX 75220 Approval Date Created by: Zach Andow I Project Manager Zach Andow Table of Contents General Comments.................................................................. Page 3 Hardware Set Schedule........................................................... Page 4 Product Data- Hinge................................................................ Page 7 Product Data- Exit Devices ...................................................... Page 8 Product Data- Door Pull ......................................................... Page 10 Product Data - Closers............................................................ Page 11 Product Data - Kick Plates ...................................................... Page 15 Product Data -Threshold........................................................ Page 16 IJIVWBH WEBB BUILDERS HARDWARE Questions and Clarifications 1. Final Keying will require a meeting to coordinate cores and key sets. End user Register number, Structure number, and keysets will be required. 2. Please see page 9 of this submittal for Night latch trim options. We have scheduled the standard 35A-NL. 35A-NL-OP can be supplied if requested. 2481 Manana Drive I Dallas, TX 75220 Will Rodgers Memorial W23-022 Hardware Schedule Heading #1 (Set #1) 1 Pair Doors #101A 1 Pair Doors #101D 1 Pair Doors #101G Opening Description: 2 - 3' 0" x 7' 0" x 1 3/4" x HMD Type A x HMF Type Al x 451VIin 6 Continuous Hinge BSPFM83SLF-HD1 PE 6 Exit Device 35A-NL-F x 386NL US26D VC) 6 Conventional Cylinder CR3000-138-7 626 CR 3 Core Only CR8000-7 KY MK 626 CR 6 Door Pull 108 US26D RO 6 Closer 7500 689 NO 6 Protection Plate K1050 10" x 35" CSK US32D RO 3 Threshold 171 A 72" PE Heading #2 (Set #1) 1 Pair Doors #101K Opening Description: 2 - 3' 0" x 7' 0" x 1 3/4" x HMD Type A x HMF Type C1 x 451VIin 2 Continuous Hinge BSPFM83SLF-HD1 PE 2 Exit Device 35A-EO-F US26D VC) 2 Conventional Cylinder CR3000-138-7 626 CR 1 Core Only CR8000-7 KY MK 626 CR 2 Door Pull 108 US26D RO 2 Closer 7500 689 NO 2 Protection Plate K1050 10" x 35" CSK US32D RO 1 Threshold 171 A 72" PE Heading #3 (Set #2) 1 Pair Doors #101B 1 Pair Doors #101C 1 Pair Doors #101F 1 Pair Doors #101J Opening Description: 2 - 3' 0" x 7' 0" Type A Type Al x 45Min 8 Continuous Hinge BSPFM83SLF-HD1 PE 8 Exit Device 35A-EO-F US26D VC) 8 Door Pull 108 US26D RO 8 Closer 7500 689 NO 8 Protection Plate K1050 10" x 35" CSK US32D RO 4 Threshold 171 A 72" PE Sep 19, 2023 4:17 PM Page 1 of 3 Will Rodgers Memorial W23-022 Heading #4 (Set #2) 1 Pair Doors #101E 1 Pair Doors #101H Opening Description: 2 - TO" x 7' 0" Type A Type A2 x 451VIin 4 Continuous Hinge BSPFM83SLF-HD1 PE 4 Exit Device 35A-EO-F US26D VC) 4 Door Pull 108 US26D RO 4 Closer 7500 689 NO 4 Protection Plate K1050 10" x 35" CSK US32D RO 2 Threshold 171 A 72" PE Heading #5 (Set #2.S) 1 Single Door #101L Opening Description: TO" x 7' 0" x 1 3/4" x HMD Type D x HMF Type C1 x 451VIin 1 Continuous Hinge BSPFM83SLF-HD1 PE 1 Exit Device 35A-EO-F US26D VC) 1 Door Pull 108 US26D RO 1 Closer 7500 689 NO 1 Protection Plate K1050 10" x 34" CSK US32D RO 1 Threshold 171 A 36" PE Heading #6 (Set #2.W) 1 Double Egress Door #101M Opening Description: 2 - 4' 6" x TO" Type C Type C1 x 451VIin 2 Continuous Hinge BSPFM83SLF-HD1 PE 2 Exit Device 35A-EO-F US26D VC) 2 Door Pull 108 US26D RO 2 Closer 7500 689 NO 2 Protection Plate K1050 10" x 53" CSK US32D RO 1 Threshold 171 A 108" PE Heading #7 (Set #3) 1 Pair Doors #103A Opening Description: 2 - TO" x TO" x 1 3/4" x HMD Type B x HMF Type 131 2 Continuous Hinge BSPFM83SLF-HD1 PE 2 Exit Device ED4200MA 630 CR 2 Electric Strike 1006CAS 630 HS 2 Door Pull 108 US26D RO 2 Closer 7500 689 NO 2 Protection Plate K1050 10" x 35" CSK US32D RO 1 Remote Push Button PUSH BUTTON BY SECURITY VENDOR MISC 1 Weatherstrip 2891 AV 1 x 72" 2 x 84" PE 2 Door Bottom 315 CN 36" PE 1 Threshold 171 A 72" PE Sep 19, 2023 4:17 PM Page 2 of 3 Will Rodgers Memorial W23-022 Heading #8 (Set #4) 1 Pair Doors #103B 1 Pair Doors #104A 1 Pair Doors #105A 1 Pair Doors #106A 1 Pair Doors #106B Opening Description: 2 - TO" x 7' 0" x 1 3/4" x HMD Type B x HMF Type B1 10 Continuous Hinge BSPFM83SLF-HD1 PE 10 Exit Device 35A-EO US26D VC) 10 Door Pull 108 US26D RO 10 Closer 7500 689 NO 10 Protection Plate K1050 10" x 35" CSK US32D RO 5 Weatherstrip 2891 AV 1 x 72" 2 x 84" PE 10 Door Bottom 315 CN 36" PE 5 Threshold 171 A 72" PE Heading #9 (Set #4) 1 Pair Doors #104B 1 Pair Doors #105B Opening Description: 2 - 3' 0" x 7' 0" x 1 3/4" x HMD Type B x HMF Type B2 4 Continuous Hinge BSPFM83SLF-HD1 PE 4 Exit Device 35A-EO US26D VC) 4 Door Pull 108 US26D RO 4 Closer 7500 689 NO 4 Protection Plate K1050 10" x 35" CSK US32D RO 2 Weatherstrip 2891 AV 1 x 72" 2 x 84" PE 4 Door Bottom 315 CN 36" PE 2 Threshold 171 A 72" PE Heading #10 (Set #5) 1 Pair Doors #103C 1 Pair Doors #104C 1 Pair Doors #105C 1 Pair Doors #106C Opening Description: 2 - TO" x TO" x 1 3/4" x HMD Type B x HMF Type B1 8 Continuous Hinge BSPFM83SLF-HD1 PE 8 Exit Device 35A-NL x 386NL US26D VC) 8 Conventional Cylinder CR3000-138-7 626 CR 4 Core Only CR8000-7 KY MK 626 CR 8 Door Pull 108 US26D RO 8 Closer 7500 689 NO 8 Protection Plate K1050 10" x 35" CSK US32D RO 4 Weatherstrip 2891 AV 1 x 72" 2 x 84" PE 8 Door Bottom 315 CN 36" PE 4 Threshold 171 A 72" PE Sep 19, 2023 4:17 PM Page 3 of 3 Architectural Door Accessories PemkoHinge® Continuous Geared Hinges: Full -Mortise Hinges: Short Leaf Flush FM SLF �� us DOOLISTED R HINGE f 25�32 — — 76Y2 (19.8) AVAILABLE FINISHES: BL, C, D, G, PW, SN WIDTH: 5/16" (7.9 mm) 23�3211 (between frame edge and door edge) (18.3) CAP WIDTH: 25/32" (19.8 mm) HEIGHT:1-11116" (42.9 mm) (to flange/frame & door edge sides) HEIGHT: 11/16" (17.5 mm) ' 11�16�� (flange to top of cap) (42.9) BL (Black Anodized) - special request only C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) 5 " PW (Painted White) - special request only 16 SN (Satin Nickel Anodized) Copyright 0 2017, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited. TITLE: PREPARED FOR: PREPARED BY: DATE: COMMENTS: The global leader in door opening solutions FM SLF CUT Rev 1 - 11.14.17 33A/35A Rim device 33A and 35A for all types of single and double doors with mullion, UL listed for panic exit hardware. Devices are ANSI A156.3 — 2014 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. The rim device is non -handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions. 33A/35A fits door stiles as narrow as 1 3/4" (44mm). Newly designed device has a one piece center case cover. Finishes — US3, US4, US10, US15 (35A Only) US26, US26D, US26D-AM,US28, 313 and 315. Specifications Device lengths 3' 2' 4" to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline 3913/16" (1011 mm) from finished floor 39"/16" (1008 mm) with Mullion Center case 8'/,6" x 19/,6" x 2"/3z" (208mm x 40mm x 62mm) dimensions Mechanism case 21/4" x 21/4" (57mm x 57mm) dimensions Projection Pushbar Neutral — 3"/,6" (97 mm) Pushbar Depressed — 31/,6" (78 mm) Latch bolt Fasteners & sex bolts (SNB) Deadlocking,'/4" (19mm) throw Includes V/4" (44mm) — 2'/4" (57mm) wood & metal doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device) ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD -EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option LX Latchbolt monitoring LX-RX Request to exit / latchbolt monitoring RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect AX Accessible device GBK Glass bead kit PIN Pneumatic SG Safety glow SEC Security screws SNB Sex bolts Hex Dogging standard CD Cylinder dogging LID Less dogging 1439 — Dull black Optional strikes QEL 1439 Roller ships standard, optional strikes available 299 Strike needs to be specified for Hollow Metal Frames Quiet electric latch retraction Bolt retraction via switch Converts exit door to push-pull operation CX Chexit delayed exit Meets NFPA 101 requirements Self-contained controls, locking, alarm EL Electric latch retraction Enables remote unlatching Alternative to manual dogging LAIC �c M Electric lever trim Electrified remote locking/unlocking Fail safe & fail secure options available No key override Pneumatic latch retraction For areas where electrical devices banned Special linkage for mechanical or pneumatic dogging AX Accessible device UL certified to meet new 5 lb. maximum operating force requirement Exceeds ANSI/ BHMA requirements ALK Alarm exit kit Unauthorized opening triggers 85-decibel horn Set in armed or disarmed mode by key RX Pushpad monitor switch Signals use of an opening SPDT switch to monitor pushpad CON Allegion Connectors • Common connectors to connect various door hardware all the way to the power supply lye Cylinder dogging Replaces hex key dogging Requires standard 1'/4" mortise cylinder 8 • Von Duprin 33A/35A Series Standard trim EO No outside trim Exit only oduct description 33A-EO 35A-EO Trim description — Base size — Grip size Projection — Slfunction 01 Cylinder type — Handing — Optional trim G� Lever Key Locks and Unlocks Product description 133A-LL 5A- Trim description 360L Base size 7'/2" x 1 "/,6" x 7/8" (190x43x22mm) Grip size — DT NL L-OP C 0 ight latch Dummy trim Night latch ey retracts latchbolt ,. Pull when dogged Key retracts latchbolt ptional pull required 33A-DT 33A-NL MW 3A-NL-OP ✓ 35A-DT 35A-NL 5A-NL-OP 386DT 386NL 188 715/32" X 1 5/811 715/3211 X 1 5/8" '/2" X 111/lfi'I (190x41mm) (190x41mm) �190x43mm) 81/2" X 45/16" 81/2" X 45/16" (216x110mm) (216x110mm) r 27/16" (62mm) 21/,6" (62mm) ' (25mm) 0 03 . 3 — Rim im — Handed x360L-DT 550DT x550DT — IVES 819010" x IVES 8190 -BE ,� Jo A ?J Lever Blank Escutcheon Thumbturn Thumbturn Always Operable (No Cylinder) Key Locks and Unlocks Always Operable (No Cylinder) 33A-L-BE 33A-T 33A-T-BE ' 35A-L-BE 35A-T 35A-T-BE 36OL-BE 360T 36OT-BE T/2" X 1 "/%" X 2/811 (190x43x22mm) Projection 3" (76mm) 3" (76mm) ANSI function 08 or 09 field selects Cylinder type 1'/4" Mortise — Handing Handed/Reversible Handed/Reversible Optional trim — E360L-BE Note: 360L & 360T used on wood door require the 33A-WDA cover plate Notes 7'/2" X 111/%" X 7/8" 71/2" X 111/16,, X 7/8" (190x43x22mm) (190x43x22mm) 113/,6" (46mm) 113/1611 (46mm) 11 or 12 field selectabl V/4" Mortise — E360T-BE 9 • Von Duprin • 33A/35A Architectural Door Accessories Rockwood 108 - Door Pull Specifications: MATERIAL: Aluminum, Brass, Bronze, Stainless Steel FASTENER: 1/4"-20 x 21/4" thru bolt & finish washer (standard 13/4" door) OPTIONS: • Back to back mounting in pairs — use BTB suffix and mounting type number (108BTB5) • Concealed mounting single pulls— use C suffix and mounting type number (108C6) • Advise if door thickness is other than 13/4" • Mounting selections for standard duty 1/4"-20 can be viewed at www.rockwoodmfg.com • 21/2" Barrier Free clearance — use BF prefix (BF108) ASSA ABLOY Opening Solutions Architectural Accessories Group Rockwood, PA Phone: (800) 458-2424 • Fax: (800) 922-9212 www.assaabloydooraccessories.us Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole 0 r in part without the express written permission ofASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. ASSA MWY Opening Solutions Experience a safer and more open world CS-108 7/19 NUK i tl.ti rIRa RIXSON ► SSA ABOY HIGH USE MODERATE I USE LOW USE 000W CLOSER SELtC) lOiq GUIDE l - 2800ST Cam Acti Heavy-D i -m ■ 8000 Aluminum 1600 Medium -Duty Aluminum 7500 SOO* Aluminum ast Iron Heavy -Duty eavy-Duty Medium -Duty 410 e Cast Iron Medium -Duty 1700 78- 6/F Aluminum Aluminum Light -Duty Light -Duty 160 210 Aluminum Aluminum 28DDSTand9500Series Closers are primarily specified - Light -Duty Light -Duty All others are for both specified and discretionary projects. Multi -size cast iron door closer for high -use applications. L [17 FEATURES FEATURES Cast iron closer body » Adjustable spring sizes 1-6 Heavy-,jULy aen" available: Regular Rigid, Parallel Rigid, CloserPlus`', Parallel Rigid Offset and Unitrol" » Slide Track: push or pull side mounting » Closer mounting plate for easy installation 25+ million cycles 30-year limited warranty ::,L:k,ES \. MARKET SEGMENT » Industrial }} Institutional Experience a safer and more open world NORTON 1 1 V RIXSON A%A ABLOY A robust, multi -sized surface closer designed to deliver superior performance and long-term reliability. 1PDeclare. 4141,_ - -- r FEATURES Cast aluminum closer body Adjustable spring sizes 1-6 Heavy-duty arms: Regular Rigid, Parallel Rigid, CloserPlus9', CloserPlus SpringTm and Unitrol® Slide Tracks: push or pull side mounting Corrosion resistant model available (specify 7SDDSS) » 2S+ million cycles 30-year limited warranty 7500 SERIES MARKET SEGMENT Government » Industrial » Institutional 8000 SERIES Multi -sized surface closer with FEATURES MARKET SEGMENT a complete range of arms and a » Cast aluminum closer body » Government sleek, minimal design suited for Adjustable spring sizes 1-6 Industrial architectural openings. » Heavy-duty arms available: Parallel Institutional Rigid, CloserPlus"', CloserPlus 5pringTM and Unitrol® Available with full or slim line ►► cover 25+ million cycles ...E - 3o-year limited warranty 1600 SERIES Fully adjustable door closer for FEATURES MARKET SEGMENT aluminum storefronts and other Cast aluminum closer body Institutional medium traffic applications. » Adjustable sizes (1-6) and fixed » Commercial sizes (3 or 4) available » Retail Heavy-duty arms available: Parallel Rigid, CloserPlusl�',CloserPlus 5pringTM, Cushion Stop and Unitrol" Corrosion resistant model available (specify 16a1SS) 25+ million cycles 30-year limited warranty Experience a safer r7nd more open world "I NORTON I IV RIXSON AS AABLOY NOPTON RIXSON CLOSERS COMPARISON 28005T 7500 8000 1600 170OBC 78B/F 210 160 N/A Grade 1 Grade i Grade 1 Grade 3 Grade 3 Grade 1 Grade 1 Yes Yes Yes Yes Yes Yes Yes Yes 10 Year 30 Year 30 Year 30 Year 5 Year 10 Year 10 Year S Year N/A 25 Million 25 Million 25 Million Per Per Per Per Standard Standard Standard Standard Yes Yes Yes Yes Yes Yes Yes Yes An nrand WWIs a ■■ ■ u _ ■■ ■ _ ■■ a [Rii1 a _ ■P'til i�e1 I■ a _ ■■ e _ ■■ ■ _ as a �R■al ■ ■P'!11 i�e1[11"Zritllii i "x 11-1/8" 2-3/8" x 6-3/4' 3/4' x 12" 3/4" x 9-1/16" 3/4" x 8" 4-1/8" x 1-3/8" 3/4" x 12" 3/4" x 9-1/16" Adjustable Adjustable Adjustable Adjustable Size 3 or 4 (depends Size 2-4; Adjustable Adjustable 1-6 1-6 1-6 1-61-4 Size 3, 4 on Size 5 or 6 1-6 Sizzee 4 installation) Non- Non- Non- Non- Non- Handed Non- Non - Handed Handed Handed Handed Handed Handed Handed Yes Yes Yes Yes Yes Yes Yes Yes Standard Standard Standard Optional Optional No Standard Optional No Optional Optional No No No No No No No Optional No No No No No No Yes Yes No No Yes No No Optional Optional Optional Optional Optional Optional Standard Standard Multiple Multiple Multiple Multiple 689,690 only Multiple 689,690 only 0 689,690 only 'Retrofit LCN4040XP o Specific to individual Series Experience a safer and more open world The ASSA ABLOY Group is the global leader in access solutions. Every day, we help billions of people experience a more open world. ASSA ABLOY Opening Solutions leads the development within door openings and products for access solutions in homes, businesses and institutions. Our offering includes doors, frames, door and window hardware, mechanical and smart locks, access control and service. tqNORTON RIXSON ASSAABLOY 9500 4040xP X X x x X X LH8016 X 7500 I 4050 8900 X X D4550 SC70A x 11-1816 x 8501 1460 x FC 8600 5500 X D3551 x x x X 8301 1460 8600 5300 X D3550 x x x X 1600 1260 7400 X x D1650 x X LH5016 x 1700 x TS77 X l x X SC90A X LH503/534 690 9300 I x 640 X 700 D1650 x 5400 x x 2800ST X TS93 x x x X x x x x x x 78B/F x x xT x x X 410 I x X 7100 CR441 QDC110 x 5100 x 4000 210 1450 x 5100 900/800 QDC211 SCSOA 5200 x 1900 160 1250 7300 3100 300/400 QDC311 SC60A 5300 LH303 600 Note: No products are exactly alike. This cross reference represents our judgement of products that are most similar. Information has been obtained from trade sources_ It is not represented nor guaranteed that any product exactly equals any other products. Since 1880, Norton Rixson door controls have been an integral part of schools, hospitals and businesses around the globe. When you need products and people that perform at the highest level, rely on Norton Rixson - From Open to Close. NORTON RIXSON [ WWW.NORTONPIXSON.COM 3000 Highway 74 East i Monroe, NC 28112 i Tel: 1-877-974-2255 ASSA ABLOY DOOR SECURITY SOLUTIONS CANADA I www.assaabloydss.ca 160 Four Valley Drive i Vaughan, Ontario, L4K 4T9 Canada i Tel: 800-46]-3007 Copyright 0 2Ol2-2G23,ASSA ABLOY Accessories and Door Controls Group, Inc_ All rights reserved_ Reproduction in whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 43412-04/23 CUT SHEET ROCKWOOD Rockwood K1050 Metal Kick Plate 050" Thick SPECIFICATIONS: MATERIAL: .050" Aluminum, Brass, Bronze, Stainless Steel FASTENERS: 116 x 5/8" Oval Head Sheet Metal Screws FEATURES: • Push Side Plate Width - 2" less than door width. • Pull Side Plate Width - 1 1/2" less than door width. • All Edges come Beveled. ORDERING: Specify height x width x finish code. Add any options. OPTIONS: • SA - self-adhesive mounting • TEK - self -drilling screws • Heavy bevel available, specify HVBEV NFPA 80 STANDARDS - 2-4.5 Protection Plates: Factory -installed protection • CSK - countersunk holes plates shall be installed in accordance • Cutouts for locks, louvers, Or with the listing of the door. Field -installed windows protection plates shall be labeled and • TORX - security torx screws installed in accordance with their listing. Exception: Labeling is not required where the top of the protection plate is not more than 16 in. (406 mm) above the bottom of the door. NOTE: Finishes US26/625 and US26D/626 are only available up to 24"H. Rockwood Manufacturing Company 300 Main St. Rockwood, PA 15557 www.mckwoodmfg.com 1 800 458 2424 Experience a safer and more open world AVAILABLE FINISHES: • US3/605 • US4/606 • US9/611 • US10/612 • US10B/613 • US10BE/613E • US26/625 • US26D/626 • US28/628 • US32/629 • US32D/630 • US32D316 • US32DMS • BSP (Black Suede Powder Coat) • WSP (White Suede Powder Coat) • Stock PC's Weight: 8" x 34" = 4.0 lbs. ANSI: J101 - metal armor plate J102 - metal kick plate J103 - metal stretcher & mop plate Copyright© 2019-2021, ASSAABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited Printed in the U.S.A. CS-K1050 - 12121 Architectural Door Accessories Pemko Commercial Thresholds: Saddle Thresholds 171 XQBHMA AVAILABLE FINISHES: A, B, BDG, D, G, SN WIDTH: 5" (127.0 mm) HEIGHT: 1/2" (12.7 mm) TITLE: PREPARED FOR: PREPARED BY: 1 DATE: 1/2" (12.7) COMMENTS: _f F" (1227.0) A(Mill Finish Aluminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold Anodized) D (Dark Bronze Anodized) G (Gold Anodized) SN (Satin Nickel Anodized) Copyright 0 2017, Pemko Manufacturing Co., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited. The global leader in door opening solutions 171 CUT Rev 1 - 02.16.17 STAR LEY. Access Technologies Part of the i111" on tamlly of brands ALLEGION" Note: Please ensure that POs, contracts, payments, and other legal documents are issued to Allegion Access Technologies LLC. Custom Quote Quote Number: Q-133129 WILL ROGERS AMON CARTER EXHIBIT HALL Created For SDB CONTRACTING SERVICES 9/20/2023 Allegion Access Technologies LLC • WWW.STANLEYACCESS.COM STANLEY, Access Technologies SDB CONTRACTING SERVICES 4951 AIRPORT PKWY STE 800 ADDISON, TX 75001-6041 Phone: Attn: Miles Wilson SENIOR PROJECT MANAGER Email: miles.wilson@sdb.com 20 September, 2023 Steve Chaney Territory Manager Quotation: Q-133129 WILL ROGERS AMON CARTER EXHIBIT HALL Dallas Branch 800 Port America Place Grapevine, TX 76051 Phone: 972-207-2753 Mobile: 972-207-2753 Email: steve.chaney2@sbdinc.com Note: Please ensure that POs, contracts, payments, and other legal documents are issued to Allegion Access Technologies LLC. Allegion Access Technologies LLC is pleased to provide you a quotation to Furnish and Install the following: Product Summary: Door Swing (Handing TBD) 1 ea. M-Force Swing Door Operator Package Including 1 — 51" Visible Header Case Net Price: USD 3,270.00 Scope of Work DOOR SWING (HANDING TBD) (1) MAGIC -FORCE SWING DOOR OPERATOR CONFIGURED "LOW ENERGY" PER ANSI A156.19, SURFACE APPLIED FOR (1) CUSTOMER SUPPLIED SINGLE 4' WIDE DOOR (HANDING TO BE DETERMINED), (1) VISIBLE 51" DARK BRONZE ANODIZED ALUMINUM FINISH HEADER CASE, (1) "OUT" ARM WITH LINKAGE, (1) MC521 SINGLE CONTROL BOX, (1) ON -OFF -HOLD OPEN SWITCH, ACTIVATION BY (2) STAINLESS STEEL WIRELESS PUSH PLATE ACTUATORS, INSTALLED WITH ONE (1) YEAR WARRANTY ON PARTS AND LABOR. Add / Deduct DEDUCT $20.00/DOOR FOR STANLEY TO PROVIDE 39" AUTOMATIC OPERATOR IN LIEU 51" AUTOMATIC OPERATOR. Lead Time: Current equipment lead time is 4-6 weeks from receipt of order and approved shop drawings. Equipment is furnished and installed during normal business hours (8:00 AM - 4:30 PM, Mon - Fri). Warranty: 1 year parts and labor. During normal business hours Mon - Fri 8:00 AM - 4:30 PM Inclusions Push plates (Wireless). Radio receivers Door operator installation. Exclusions Delegated Design Structural Review (no seismic review) If you would like to pay by Credit Card, please contact us at 1(800) 722-2377 Ext. 4 We accept the following Credit Cards: Page 2 of 4 STANLEY, Access Technologies SDB CONTRACTING SERVICES 4951 AIRPORT PKWY STE 800 ADDISON, TX 75001-6041 Phone: Attn: Miles Wilson SENIOR PROJECT MANAGER Email: miles.wilson@sdb.com Exclusions Steve Chaney Territory Manager Quotation: Q-133129 WILL ROGERS AMON CARTER EXHIBIT HALL 120 volts AC to inside auto door header 5 amp min. Cleaning and protection of installed material. Permits & Inspections. Prevailing Wage and/or Certified Payroll. Back boxes & low voltage wiring from any control to inside auto door header. Doors, frames & associated hardware. Structural support / wood blocking for swing headers After hours premium labor Dallas Branch 800 Port America Place Grapevine, TX 76051 Phone: 972-207-2753 Mobile: 972-207-2753 Email: steve.chaney2@sbdinc.com If you would like to pay by Credit Card, please contact us at 1(800) 722-2377 Ext. 4 We accept the following Credit Cards: Page 3 of 4 STANLEY, Access Technologies SDB CONTRACTING SERVICES 4951 AIRPORT PKWY STE 800 ADDISON, TX 75001-6041 Phone: Attn: Miles Wilson SENIOR PROJECT MANAGER Email: miles.wilson@sdb.com Steve Chaney Territory Manager Quotation: Q-133129 WILL ROGERS AMON CARTER EXHIBIT HALL Dallas Branch 800 Port America Place Grapevine, TX 76051 Phone: 972-207-2753 Mobile: 972-207-2753 Email: steve.chaney2@sbdinc.com Conditions: Acceptance of this quotation / proposal by the purchasing unit shall constitute an order and is a contract for the purchase of the articles and services described therein on the terms outlined herein. Additional or different terms applicable to a sale may be specified in the body of a Allegion Access Technologies LLC (hereinafter " Company ") document or agreed to in writing by the parties. 1 Payment by purchaser to the Company shall be Net 30 days from date of invoice, subject only to contract termination by the Company in the event of an adverse credit decision by the Company's Credit Department. Late payments are subject to a charge equal to 1.5% per month of the amount outstanding or the maximum allowed by law, whichever is less. 2 Payment is not contingent upon purchaser's receipt of moneys from owner or any other source. 3 The following shall represent events of default by purchaser in the terms of this contract: non-payment in accordance with the terms set out herein, cancellation of this order by purchaser or refusal by purchaser or its agent to accept delivery of goods from the Company. 4 In the event of default by purchaser, purchaser agrees to pay the Company the contract price for all work completed by the Company to the date of default or cancellation as well as all of the Company's costs and expenses incurred in enforcing the terms of this contract including, but not limited to a reasonable attorney's fee, collection and court costs. 5 Except for purchaser's payment obligations, neither party shall be liable for any failure under this agreement due to acts of nature, earthquake or storm; failure of public utilities or common carriers; or any other causes beyond the reasonable control of the affected party. 6 Unless accepted by purchaser, this quotation shall expire ninety days from the date hereof. 7 Sales tax, if applicable, is not included in this Quotation. 8 The Warranty as outlined in the Quotation will not apply if the products: (1) have been altered, except by the Company; (2) have not been installed, operated, repaired, or maintained in accordance with instructions supplied by the Company; or (3) have been subjected to abnormal physical or electrical stress, misuse, negligence, accident, or catastrophe. 9 Any dispute, controversy or claim arising out of or relating to this Agreement or the breach, termination, or invalidity of it shall be submitted to final and binding arbitration as the sole and exclusive remedy for such controversy or dispute, provided, however that the Company may commence action against you in a court of law for infringement of the Company's intellectual property rights or default in any payment obligation. This Contract will be governed in accordance with the laws of the state where the premises at which the Company performs the Work or provides Services is located, without regard to choice of law principles. This document is a contract. I affirm that I have the authority to sign this contract and this is my acceptance of this Quotation as well as my authorization to proceed with the above stated work at the price of $ plus applicable sales tax. Signature: Title: Name (Print): Date: Ref#: Note: Please ensure that POs, contracts, payments, and other legal documents are issued to Allegion Access Technologies LLC. If you would like to pay by Credit Card, please contact us at 1(800) 722-2377 Ext. 4 We accept the following Credit Cards: Page 4 of 4 swc - E L E C T R I C PROPOSAL 9/20/2023 Miles Wilson Sdb Re: Will Rogers Doors 23-0130 Front Entrance doors- $2,500 x three doors= $7,500.00 1. Install power to three auto door openers. 2. Install box/empty conduit to entrance, exit, and handicap buttons for each motor 3. Power to come from nearest source. 4. All work to be done during normal business hours. 5. Price good for 30 days Back doors - $ 2,100.00 x 4 = $8,400.00 1. Install power to three auto door openers. 2. Install box/empty conduit to entrance, exit, and handicap buttons for each motor 3. Power to come from nearest source. 4. All work to be done during normal business hours. 5. Price good for 30 days Dave Skaggs ELECTRICAL PROJECT MANAGER CULL: (903) 456-0790 8 13 1 LB] freeway, Sulte 785, Dallas, TK 75251 V WW,SWC-ELEGrRIC.COM swc ELECTRIC Southwest Commercial Electric, Inc. 1 8131 Lyndon B Johnson Freeway, #785, Dallas, TX 75251 VVBH WEBB BUILDERS HARDWARE September 27, 2023 Miles Wilson SDB Contracting Reference: Amon Carter Renovation Electric Strike additions The following cost is associated with adding 7 electric strikes 1006CAS -HES to the hardware package. Material 1006CAS (7) Clarifications: $4,004.00 Total Cost: $4,004.00 Pricing includes all applicable freight, and crating charges for additional materials. We have NOT Proceeded with these changes. Please issue a formal change order. We thank you for the opportunity. Zach Andow f We Builders Hardware 2481 Mariana Drive I Dallas, TX 75220 The 1006 series is the strongest and most versatile electric strike available. The dual interlocking plunger design and heavy duty stainless steel construction, enables it to exceed every standard developed for electric strikes. Unsurpassed Flexibility • Accommodates every cylindrical and mortise locksets with or without a 1" deadbolt • Available as a separate strike body and interchangeable faceplate or a Complete Pac • Non -handed, dual voltage • Available in fail safe or fail secure (standard) Tested for Durability • UL 10C, 3 hour fire -rated • ANSI A250.13-2003 windstorm listed • UL 1034 burglary -resistant listed • Suitable for outdoor use Robust Design • ANSI/BHMA A156.31, Grade 1 • Endurance 1 million cycles • Tamper resistant, stainless steel construction • Dynamic strength 350 ft-lbs (fail secure) Features • Stainless steel construction • Tamper resistant • Static strength 2,500 lbs. (fail secure) • Dynamic strength 350 ft- Ibs. (fail secure) • Endurance 1,000,000 cycles • Fail secure (standard) • Non -handed • Accommodates up tot"deadbolt • Plug-in connector • Full keeper shims for horizontal adjustment • Trim enhancer • Dual voltage 12 or 24 VDC continuous duty • Internally mounted solenoid • Suitable for Outdoor Use Certifications • ASTM E152 Fire Door Compliant • ANSIiASTM E330 • ANSIiBHMA A156.31, Grade 1 • ANSI/SDI 250.13 Windstorm Resistant • NFPA-252 fire door Compliant • RoHS Compliant • Florida Building Code Approved TAS 201, 202, 203 (old) • Environmental Product Declaration (EPD) • Health Product Declaration (HPD) • UL 1034 Burglary -Resistant Listed • UL 10C Fire -Rated, 1-1/2 Hour Double Door [Fail Secure only] • UL 10C Fire -Rated, 3 Hour Single Door [Fail Secure Only] • UL 294 Listed How to Order Specifications Frame Application • Metal Wood Electrical • .24 Amps at 12 VDCiVAC • .12 Amps at 24 VDCiVAC • DC continuousdutyiAC intermittent duty only Options • Fail Safe • LBM - Latchbolt monitor • LBSM - Latchbolt strike monitor • 27 interchangeable faceplate options (monitor switches may not work with all faceplate options) Accessories • 157 Torx® screws • 1000-102 Rain guard • 1006-103 Full Keeper Shims • 1000-104 Lip Extension Trim Adapter • 1006-105Trim Enhancer • 1000-110 Replacement Strike Plate • 1000-130 KID Filler Plate • 150 Strike Latch Guard • HESCUT-MTK Metal Template Kit • 2005M3 SMART Pac® III IUUb Universal tiectric (wanK) tlectrlcstrlKeboayomy, JDianK) Fall�-ecure Strike faceplates ordered separately (standard) CS* Complete Electric Strike; includes F Fail Safe the SMART Pac III and J, KD, KM, HM, ND faceplates and brackets CLB* Complete Electric Strike for latchbolt locks; includes J, K, KD and KM faceplates CDB* Complete Electric Strike for Deadbolt Locks; includes the ND and HIM faceplates CAS* Complete Electric Strike for Deadbolt Locks; includes the N, ND and NM faceplates Dimensions i I �T 3-311. �85mm, 4118 1, 054-7[8' 23.8mm] 1411W __4 [42.Tmm[ 33/8- [85mmI 2T [521-3/4' [44.5mm] ® 1 Diagram shaven with DB f—pl— buS l3rlgnt Krass (DianK) No Monitor ......... ..... ..._... .. . 606 Satin Brass LBM Latch boItMonitor** 612 Satin Bronze LBSM Latchbolt Strike 613 Bronze Toned Monitor— 629 . .. ....... .... Bright Stainless Steel 630 Satin Stainless Steel BLK Black *Complete Pacs are only available in the 630 finish. **Not available with CS, CDB, or CAS GENERAL DEMOLITION NOTES t FDUIPMENT6 MATERIAL THAT WILL REQUIRE REMOVAL � REPAIR To=AREA BELOW FLOOR SLAB NA'TCH S&T�CEZE=I- 'GE A P-R-CHEDULED SITE VISIT FOR BIDDING —CONTRACTORS SURFACE TO MAPOH SURROUNDING FINISHED CONDITIORS 4 GRIND HIGH SPOTS & ROUGH ARZkB AS NECESSARY TO PRODUCE A UEVCL SLAB GENERAL NOTES PCY TO ANY DEMOLITION REQUIRED WITHIN THE SCOPE OFON THIS D i DEMOLITION NOTES OREMOVE EXISTINGDOORANDFRAMESANDPREPAREFORNEW DOORS AND FRAMES FO PATCH CONCRETE AT DOOR SILLS AS REQUIRED FOR NEW DOORS. D PREFUNCTION i ❑❑ �I Overall Demolition Floor Plan I 0 20' 40' 60' FORT WORTH DEVELOPMENT DEPARTMENT APPROVED SUBJECT TO THE PROVISIONS OF SECTION 303 (C) ORDINANCES NO.25382/83-03-2022 aliary 11 mai»uanceor9renmg M a P—H or ms eM speufiwbons be mmlrueE to bapshell rot s permlT f«por W, sPproval asnr Nolenon Dram P.W.I. resumn910 91va uro�rRy tovolaWsm cancel-propvlsian of Theis uen a Die permb beseE upon plans, spenficatlons enE no prevent Me bulldin6g omcial tram there , or from lEiig olperetim "W-buie b>irg otner prm.—N t1n>rvR>a�nlpna mma eaaaa r msp>rtor are 1 en-Idmg DATE 12/15/2022 Johnnie Hu9he: ` BUILDING OFFICIAL ELEMENTS of Architecture I201616 Ave., SURe I W F, WOH6, TX 261S4 en.�useeD NemeanaArM.om CONFIDENTIAL AND PROPRIETARY aim/ -- ONE FORT WORTH® Will Rogers Memorial Center Amon Carter Exhibit Hall Door Replacement 3401 W. Lancaster Fort Worth, TX 76107 sgu(s) / cprauvexr RroccT rWm 20-100T00 ttVswxs November 01, 2022 Overall Demolition Floor Plan 1""""A1.1 UNITED *Ad INTERIORS Customer: Cash Customer - Ft. Worth 328 Lipscomb St. Fort Worth, TX 76104 Account Code 1552 Terms CASH Customer Job # Salesperson Jake Hardin Order Name SDB Contracting Services Furnish only Job name: Amon Carter Door Replacement Quote # Quote Date Expiration Date Ship To: CFW Office Location 328 Lipscomb St. Fort Worth, TX 76104 Purchase Order # : Shipped Via : Customer Pickup Quote 400782 Sep 29, 2023 Oct 29, 2023 Unit Extended Qty Product Descriation Price Price 8 Iliams Brothers # WB-UAD 24" x 36" **see submittals attached** 177.00 1,416.00 Lead time approx. 3 to 4 weeks Lead time approx. 8 to 10 weeks Pr c Total 6.00 STATE - S f Texas 218.50 C0385 - Fort Worth - 222003 34.96 MTA06 - Fort Worth MTA - 6 17.48 SP094 - Fort Wo rime Control - 17.48 5,220503 e Total 3,78 If scope above is approved, please sign and date below to begin procurement process: Printed Oct 3, 2023 12:34 PM Page 1 of 1 The Williams Bros. Corporation of America FAMILYOWNEO&OPERATED S' re1990 SUBMITTAL SHEET WALLS & CEILINGS Flush, stainless steel cam latch opens with screw- driver SURFACE �a z v WALL OPENING FRONT ELEVATION 0D c� z z w 0- 0 J a �. WALL OPENING 1 SECTION DETAIL 2„ MOUNTING SLOT LAG SCREWS IN 1 TYP. .203" X .375" WOOD STUDS '(1 1/4" ` r ` HINGE ` LOCK ANCHOR STRIPS IN C.M.U. WALL OR CONCRETE WALL Innovative cost effective access door. 16 ga. return frame and uniweld construction allows for an aesthetically pleasing appearance and square fit in all wall and ceiling applications. Laser cut from one sheet of cold rolled steel, no corner mitering — aes- thetically preferred by architects and building professionals. RELATED PRODUCTS Project: Contractor: Sizes: WB GP 100 Series Premium Access Door WB Basic 300 Series Access Door Date: Architect: Quantity: App Initials: 1330 Progress Drive • Front Royal, VA 22630 • Phone: 1-800-255-5515 • www.wbdoors.con 40PFanily Owned a Operated , ,f Since 1990 MADE IN VIRGINIA-USA SPECIFICATIONS: Door: 16 ga. steel. Trim being 1-3/4" wide with radius corners Trim: 16 ga. steel having a depth of 1-3/4" Finish: Primed white baked enamel, paintable surface Latches: Flush, stainless steel cam latch Hinge: Full length semi -concealed piano hinge allows 1802 opening OPTIONS (at additional cost) ❑ Stainless Steel Type 304 ❑ Stainless Steel Type 316 No. 4 Satin Finish Brushed ❑ WB Key Cylinder Locks - keyed alike 2 keys per door ❑ Custom colors ❑ Mortise lock and locks by others ❑ Neoprene gasket all 3 sides ❑ Special sizes available ShiR p Model Sae Wall Cam Wt. x H Opening 61/4 x 61/4 8114x81/4 Latches 1 1 4 5 UAD 200 6 x 6 UAD 200 8x8 UAD 200 8 x 12 81/4 x 12 1/4 1 6 UAD 200 8 x 16 81/4 x 16 1/4 1 8 UAD 200 10 x 10 10 1/4 x 10 1/4 3 6 UAD 200 12 x 12 12 1/4 x 12 1/4 3 8 UAD 200 12 x 16 12 1/4 x 16 1/4 3 10 UAD 200 12 x 18 12 1/4 x 18 1/4 3 11 UAD 200 12 x 24 12 1/4 x 24 1/4 4 15 UAD 200 14 x 14 14 1/4 x 14 1/4 3 10 UAD 200 14 x 24 14 1/4 x 24 1/4 3 14 UAD 200 16x16 16114x161/4 3 13 UAD 200 16 x 20 16 1/4 x 20 1/4 3 16 UAD 200 16 x 24 16 1/4 x 24 1/4 4 17 UAD 200 18 x 18 18 1/4 x 18 1/4 3 14 UAD 200 18 x 24 18 1/4 x 24 1/4 4 18 UAD 200 18 x 36 18 1/4 x 36 1/4 5 29 UAD 200 20 x 20 20 1/4 x 20 1/4 3 17 UAD 200 20 x 24 20 1/4 x 24 1/4 4 UAD 200 20 x 30 201/4 x 301/4 4 #23 UAD 200 22 x 22 22 1/4 x 221/4 4 UAD 200 22 x 24 22 1/4 x 24 1/4 4 23 UAD 200 22 x 30 22 1/4 x 30 1/4 4 25 UAD 200 22 x 36 22 1/4 x 36 1/4 5 32 UAD 200 24 x 24 24 1/4 x 24 1/4 4 24 UAD 200 24 x 30 24114 x 301 /4 4 27 UAD 200 24 x 36 24 1/4 x 36 1/4 5 35 UAD 200 24 x 48 24 1/4 x 48 1/4 6 43 UAD 200 30 x 30 30 1/4 x 30 1/4 6 32 UAD 200 30 x 36 30 1/4 x 36 1/4 6 39 UAD 200 32 x 32 32114 x 32 1/4 6 35 UAD 200 36 x 36 36 1/4 x 36 1/4 7 44 UAD 200 36 x 48 36 1/4 x 48 1/4 8 57 UAD 200 48 x 48 48 1/4 x 48 1/4 12 70 �llft� Buy01f1lri WBCA 2019 6 NORTH TEXAS DRYWALL SYSTEMS 12234 Currency Circle Forney, Texas 75126 Office 214-484-4564 / Cell 972-891-0816 i uan(&ntxdrvwall. corn PROPOSAL Date: October 3, 2023 Project: Amon Carter WE PROPOSE hereby to furnish all required labor, material and equipment to complete the scopes of work as indicated. Per plans and specifications as outlined below: Sales Tax Excluded. This proposal is valid for 30 days as material prices increase monthlv. SCOPE OF WORK: 09110 Standard Ga. Framing: All interior metal to be 20ga. 09250 Drywall: Demo for 8 new access panel. Frame walls for 8 new access panels. Install 8 access panel provided by GC. Support wires if required. Patch back drywall. Normal working hours. TOTAL: EXCLUSIONS 1 Sales Tax. 2 Plaster patching. 3 Tape, bed, and paint. 4 Temporary walls or dust partitions. 5 Finish caulking or joint sealants. 6 Flashings and expansion joint covers. 7 Fire caulk at MEP penetrations. 8 Demolition of any kind. 9 Electrical or security hardware. 10 Dumpsters and/or trash hauling. 11 Overtime hours. 12 Building Department permit, filing fees and inspections. 13 Handrails, roof access and temporary power. Juan Anacleto Project Manager/Estimator $3,880.00 NORTH TEXAS DRYWALL SYSTEMS 12234 Currency Circle Forney, Texas 75126 Office 214-484-4564 / Cell 972-891-0816 i uan(&ntxdrvwall. corn PROPOSAL Date: October 3, 2023 Project: Amon Carter WE PROPOSE hereby to furnish all required labor, material and equipment to complete the scopes of work as indicated. Per plans and specifications as outlined below: Sales Tax Excluded. This proposal is valid for 30 days as material prices increase monthlv. SCOPE OF WORK: 09110 Standard Ga. Framing: All interior metal to be 16ga. 09250 Drywall: Install box header 16ga. CFMF. Install kickers as required. Patch back if required. TOTAL (per foyer) EXCLUSIONS 1 Sales Tax. 2 Plaster patching. 3 Tape, bed, and paint. 4 Temporary walls or dust partitions. 5 Finish caulking or joint sealants. 6 Flashings and expansion joint covers. 7 Fire caulk at MEP penetrations. 8 Demolition of any kind. 9 Electrical or security hardware. 10 Dumpsters and/or trash hauling. 11 Overtime hours. 12 Building Department permit, filing fees and inspections. 13 Handrails, roof access and temporary power. Juan Anacleto Project Manager/Estimator $1,600.00 M&C Review Page 1 of 4 Official site of the City of Fort Worth, Texas A CITY COUNCIL AGEND FORTWORTH Create New From This M&C DATE: 11/14/2023 REFERENCE NO.. **M&C 23- LOG NAME 0965 CODE: C TYPE: CONSENT PUBLIC HEARING: 25AMEND_PED_CIP NO SUBJECT: (ALL) Authorize the Execution of a Vendor Services Agreement with Johnson Control, Inc. in an Amount Not to Exceed $1,204,748.00 for the Fort Worth Convention Center Metasys Upgrade, Authorize Change Order 1 to the Construction Contract with SDB, Inc. in an Amount Not to Exceed $100,640.19 for the Amon Carter Exhibit Hall Door Replacement, Adopt Appropriation Ordinance and Amend the Fiscal Years 2024-2028 Public Events Capital Improvement Program RECOMMENDATION: It is recommended that the City Council 1. Authorize execution of a vendor services agreement with Johnson Controls Inc. in the amount of $1,204,748.00 from available funding in the FWCC Metasys project (City Project No. 105210); 2. Authorize execution of a Change Order to the Construction Contract with SDB, Inc., City Secretary Contract 59739, in an amount not to exceed $100,640.19 for a total contract amount of $790,980.19 to address scope changes for Americans with Disabilitites Act compliance with available funding from the Amon Carter Exhibit Hall Door Replacement project (City Project No. 101437); 3. Adopt the attached appropriation ordinance in the Public Events Capital Fund by: a. Removing the FWCC Exhibit Hall Lighting (City Project No. 105074) and FWCC Lobby Renovation (City Project No. 104370) projects, eliminating appropriations and increasing the available balance in the Public Events Capital Fund in the amount of $1,660,000.00, b. Increasing estimated receipts and appropriations in the amount of $1,370,000.00, from available funds, for the purpose of funding the FWCC Metasys project (City Project No.105210), c. Increasing estimated receipts and appropriations in the amount of $290,000.00, from available funds, for the purpose of funding the FWCC Expansion project (City Project No. 102582), d. Adjusting estimated receipts and appropriations by increasing estimated receipts and appropriations in the FWCC Expansion project (City Project No. 102582) in the amount of $681,135.00 and decreasing estimated receipts and appropriations in the FWCC Minor Renovation & Repair programmable project (City Project No. P00053) by the same amount, Adjusting estimated receipts and appropriations by increasing estimated receipts and appropriations in the FWCC Star Tower Facade project (City Project No. 102515) in the amount of $60,000.00 and decreasing estimated receipts and appropriations in the FWCC Minor Renovation & Repair programmable project (City Project No. P00053) by the same amount, Adjusting estimated receipts and appropriations by increasing estimated receipts and appropriations in the Amon Carter Exhibit Hall Door Replacement project (City Project No. 101437) in the amount of $140,000.00 and decreasing estimated receipts and http://apps.cfwnet.org/council_packet/mc review.asp?ID=31590&councildate=l1/14/2023 12/19/2023 M&C Review Page 2 of 4 appropriations in the WRMC Minor Renovation and Repair programmable project (City Project No. P00054) by the same amount, and Adjusting estimated receipts and appropriations by increasing estimated receipts and appropriations in the WRMC Generator Enhancement project (City Project No. 102634) in the amount of $100,000.00 and decreasing estimated receipts and appropriations in the WRMC Minor Renovation and Repair programmable project (City Project No. P00054) by the same amount. 4. Amend the Fiscal Years 2024-2028 Capital Improvement Program DISCUSSION: The purpose of this M&C is to amend the Public Events Capital Improvement Program (CIP) for the Fort Worth Convention Center (FWCC) and Will Rogers Memorial Center (WRMC) chapters by reallocating funds for current capital needs. This M&C also authorizes a sole source vendor service agreement with Johnson Control, Inc. for the METASYS upgrade at FWCC and execution of a Change Order to the construction contract with SDB, Inc (CSC 59739) for scope changes related to ADA compliance for the Amon Carter Exhibit Hall Door replacement project at WRMC. FWCC METASYS Project (CPN 105120): The METASYS Building Automation System (BAS) is a complete family of hardware and software control components designed to work together as one cohesive system. METASYS enhances occupant comfort, health, safety, security, and productivity, and it provides more system control and easier access to information than other building automation systems. The latest version of METASYS maximizes operator efficiency, and enhances overall system performance and reliability by identifying, troubleshooting and correcting issues from any Windows - based device. The system also provides a predictable and preventive maintenance on critical components of the convention center's commercial HVAC, lighting, security and protection systems. The project scope includes the removal and replacement of critical data interfacing components, software upgrades, operator training and certification, and a one-year warranty on parts and services to include patches and upgrades. The project is scheduled to start in December 2023 with a substantial completion date of 1 Q, FY2025. The total project budget for the FWCC METASYS Upgrade is $1,370,000.00. A waiver of the goal for Business Equity subcontracting requirements was requested, and approved by the DVIN, in accordance with the applicable Ordinance, because the purchase of goods or services is from a sole source where subcontracting or supplier opportunities are negligible. Kitchen FF&E for the FWCC Expansion Phase I (CPN 102582): The current furniture, fixtures, and equipment (FF&E) for the Fort Worth Convention Center requires modernization, upgrades, and increased cooking, preparation, and service capacity in support of the expansion project. The department had previously planned to procure kitchen FF&E in support of the convention center expansion. Increasing the FF&E budget for the project ensures compatibility issues are minimized, procurement and installation is more efficient, and the volume of items for procurement provides additional opportunities for savings. This is an ARPA project and is scheduled for substantial completion 2Q, FY2025. The addition for the FWCC Kitchen FF&E is $971,135.00 for a new total project budget of approximately $95,972,680.00. FWCC Star Tower Facade Project (CPN 102515): The purpose of this project is to evaluate exterior brick, glass and connection joints for wear, provide construction drawings and facilitate repairs to the Fort Worth Convention Center (FWCC) Star Tower, located at the SW corner of the building. PED, in collaboration with PMD, is working through the design process and bid documentation phase of the current project. Upon further investigation, engineers have identified severe corrosion of metal studs due to a lack of waterproofing around the stucco requiring a need for increased funding to complete the needed improvements. This is an ARPA project and is scheduled for substantial completion 2Q, FY2024. The total project budget for the FWCC Star Tower Facade Caulking and sealing is $225,000.00 Amon Carter Door Replacement (CPN 101437): On May 9, 2023 M&C 23-0366 awarded SDB Inc a construction contract for the replacement of doors and associated hardware at the Amon Carter http://apps.cfwnet.org/council_packet/mc review.asp?ID=31590&councildate=l1/14/2023 12/19/2023 M&C Review Page 3 of 4 Building on the Will Rogers Memorial Center Campus and executed CSC 59739 in the amount of $690,340.00. Construction work began in the second quarter of calendar year 2023. During the construction process, contractors have identified numerous locations above interior and exterior doorways missing headers. The headers are essential to maintaining doorway integrity. Additionally, in an effort to increase access to the facility, the department has requested eight (8) additional ADA door openers. Finally, the current door hardware does not conform with the majority of the hardware used throughout the campus. As such, the department is asking to upgrade door hardware and other scope changes to meet current usage, with the execution of Change Order #1 to CSC 59739. Additional Public Events Capital funding is proposed to supplement existing ARPA project funding. The project is scheduled for substantial completion 2Q, FY2024. The total project budget for the Amon Carter Door Replacement is $904,459.85 In accordance with the City Code of Ordinances, Part II, Chapter 7-1 Fort Worth Building Administrative Code, Section 109.2.1, Exception 2; "Work by non -City personnel on property under the control of the City of Fort Worth shall be exempt from the permit fees only if the work is for action under a contract that will be or has been approved by City Council with notes in the contract packages stating the fee is waived." SDB Inc is in compliance with the City's Business Equity Ordinance by committing to 35\% MWBE participation on this project. The City's MWBE goal on this project is 15\%. WRMC Generator Enhancement Project (CPN 102634): The original scope of this project was to replace generator in Coliseum that provides emergency power to lighting in the Coliseum and Exhibit Hall. Additionally, will provide new equipment providing emergency power to Admin offices and facility network, data & phone infrastructure. During a recent power outage, the staff and our strategic partners (FWSSR) sustained critical outages from data and communication servers to emergency lighting where guests were present. Engineers are redesigning generator capacities and locations to ensure maximum emergency back-up capabilities. This is an ARPA project and is scheduled for substantial completion 4Q, FY2024. The total project budget for the emergency generator replacement is $415,000.00 FY2024-2028 Capital Improvement Program (CIP) Amendments: Both the FWCC Grand Lobby Renovations, approved in the FY2023-2027 CIP in connection with ordinance 25773-09-2022, and FWCC Exhibit Hall Lighting project, approved in the FY2024-2028 CIP in connection with ordinance 26453-09-2023, are being deferred to future phases of the FWCC Expansion project, which is included in FY2026 of the FY2024-2028 CIP for an estimated $606M to be funded with future bonds. The additional funding to the current FWCC Expansion project for the Kitchen FF&E and the FWCC Metasys Project were not included in the current CIP because the imminent need was unforeseen at the time the CIP was being developed. The FWCC Star Tower Facade is funded by American Rescue Plan Act (ARPA) funds, Subtitle M (Coronavirus State and Local Fiscal Recovery Funds) with the restoration of deferred capital projects in M&C 21-0913, November 30, 2021 and as such is not included in any current or previous Capital Improvement Program (CIP). Allocations are however made annually in the CIP for the FWCC Minor Renovation & Repair programmable project. The Amon Carter Exhibit Hall Door Replacement and WRMC Generator project is funded by American Rescue Plan Act (ARPA) funds, Subtitle M (Coronavirus State and Local Fiscal Recovery Funds) with the restoration of deferred capital projects in M&C 21-0913, November 30, 2021 and the reallocation of other WRMC ARPA project funding in M&C 23-0646, August 8, 2023 and as such is not included in any current or previous Capital Improvement Program (CIP). Allocations are made annually in the CIP for the WRMC Minor Renovation & Repair programmable project. FISCAL INFORMATION/CERTIFICATION: The Director of Finance certifies that funds are currently available in the FWCC Lobby Renovation, FWCC Exhibit Hall Lighting, FWCC Minor Renovation & Repair and WRMC Minor Renovation & Repair projects within the Public Events Capital Fund and upon approval of the above recommendations and adoption of the attached appropriation ordinance, funds will be available in the various capital projects within the Public Events Capital Fund to support the above recommendations and execution of the agreement and change order. Prior to an expenditure being incurred, the Public http://apps.cfwnet.org/council_packet/mc review.asp?ID=31590&councildate=l1/14/2023 12/19/2023 M&C Review Page 4 of 4 Events Department has the responsibility of verifying the availability of funds. TO Fund Department Account Project Program Activity Budget I Reference # Amount ID ID Year (Chartfield 2) FROM TFund Department Account Project Program Activity Budget Reference # I Amount ID ID Year (Chartfield 2) Submitted for Citv Manager's Office bv: William Johnson (5806) Originating Department Head: Michael Crum (2501) Additional Information Contact: Keith Chisolm (2525) ATTACHMENTS (Dept.) Reauest for Waiver of Business Equity Goal FWCC METASYS Uparade sianed.pdf (CFW Internal) 25AMEND PED CIP funds availabilitv.pdf (CFW Internal) CO #1 R3 - Panics, Door Operators, Access Panels, Headers - COFW AC EH.pdf (CFW Internal) COFW Convention Center Metasys Uparade Proiect Schedule 2023.pdf (CFW Internal) COFW Convention center Metasys Upgrade -Form 1295 Certificate 101113909.pdf (CFW Internal) COFW-Convention Center Metasys Controls Upgrade Proposal 10042023 PDM.pdf (CFW Internal) FID 25 AMEND PED CIP.XLSX (CFW Internal) FORM 1295 CERTIFICATE (CS59739-WRMC).PDF (CFW Internal) ORD.APP 25AMEND PED CIP 30205 r(3).docx (Public) Signed APCF CSC59739 SDB 10.16.23 GV.pdf (CFW Internal) http://apps.cfwnet.org/council_packet/mc review.asp?ID=31590&councildate=l1/14/2023 12/19/2023 REQUEST FOR INFORMATION RFI#: 912112023UTC SDB Contracting Services SD13-10-0196-00 - COFW Amon Carter Exhibit Hall Door Replacement TO: Greg Lay FROM: Trevor Barney Elements of Architecture SDB, Inc. PHONE: (214) 415-3510 PHONE: (214) 930-9666 EMAIL: glay@elementsofarc.com EMAIL: trevor.barney@sdb.com CC: City of Fort Worth, Madison Ashcroft DUE BY: 9/26/2023 UTC SUBJECT: No Existing Blocking or Bracing at Header DRAWING REFERENCE: A2.3 SPEC SECTION: QUESTION Per Sheet A2.3, detail 5 and detail 1 show existing wood blocking and existing bracing to structure above. On both the west and east set of exterior doors, there is no blocking or bracing where the headers are. Please advise. SUGGESTION: DRAWINGS RESPONSES 1. Use light gage track 5-1/2" x 1-1/4" x 16 ga. (or larger) with flanges turned downward and wood blocking installed and secured between flanges. 2. Install dia. brace light gage joists at 4'-0" o.c. (1:1 slope) extending southward (toward interior of building) from the track and securing to the existing 6" ceiling support studs above. Remove existing gypsum board soffit as required to perform this work and patch back/paint as necessary for finished appearance. 3. Per record drawing, the vertical distance between bottom of ceiling support joists and ceiling is 5.5 feet. The new diag. brace studs should be minimum 3 5/8" x 1 5/8" x 20 ga. Secure dia. braces to existing joists and new track with min. (4) No. 8-18 screws each end. ✓ �' jlLu , � ti r, ' r 1 Aq 116,il;(w F7-