HomeMy WebLinkAboutContract 62252City Secretary Contract No. 62252
FORTWORTH,
*Ir
VENDOR SERVICES AGREEMENT
This VENDOR SERVICES AGREEMENT ("Agreement") is made and entered into by and
between the CITY OF FORT WORTH ("City"), a Texas home rule municipal corporation, and RLC
CONTROLS, INC. ("Vendor"), each individually referred to as a "party" and collectively referred to as
the "parties."
1. Scope of Services. Vendor will provide City with Programmable Logic Controller (PLC)
panel components and systems integration services ("Services"), as set forth in more detail in Exhibit "A,"
attached hereto and incorporated herein for all purposes.
2. Term. The initial term of this Agreement is for one year(s), beginning on the date that this
Agreement is executed by the City's Assistant City Manager ("Effective Date") and expires one year from
that date ("Expiration Date"), unless terminated earlier in accordance with this Agreement ("Initial Term").
City will have the option, in its sole discretion, to renew this Agreement under the same terms and
conditions, for up to four (4) one-year renewal option(s) (each a "Renewal Term").
3. Compensation. City will pay Vendor in accordance with the provisions of this Agreement,
including Exhibit `B," which is attached hereto and incorporated herein for all purposes. Total annual
compensation under this Agreement will not exceed Six Million Dollars ($6,000,000.00). The Vendor
acknowledges that this is a non-exclusive agreement and there is no guarantee of any specific amount of
purchase. Further, Vendor recognizes that the amount stated above is the total amount of funds available,
collectively, for any Vendor that enters into an agreement with the City under the relevant M&C or
cooperative agreement and that once the full amount has been exhausted, whether individually or
collectively, funds have therefore been exhausted under this Agreement as well. Vendor will not perform
any additional services or bill for expenses incurred for City not specified by this Agreement unless City
requests and approves in writing the additional costs for such services. City will not be liable for any
additional expenses of Vendor not specified by this Agreement unless City first approves such expenses in
writing.
4. Termination.
4.1. Written Notice. City or Vendor may terminate this Agreement at any time and for
any reason by providing the other parry with 30 days' written notice of termination.
4.2 Non -appropriation of Funds. In the event no funds or insufficient funds are
appropriated by City in any fiscal period for any payments due hereunder, City will notify Vendor
of such occurrence and this Agreement will terminate on the last day of the fiscal period for which
appropriations were received without penalty or expense to City of any kind whatsoever, except as
to the portions of the payments herein agreed upon for which funds have been appropriated.
OFFICIAL RECORD
CITY SECRETARY
Vendor Services Agreement FT. WORTH, Tx Page 1 of 12
City Secretary Contract No.
4.3 Duties and Obligations of the Parties. In the event that this Agreement is
terminated prior to the Expiration Date, City will pay Vendor for services actually rendered up to
the effective date of termination and Vendor will continue to provide City with services requested
by City and in accordance with this Agreement up to the effective date of termination. Upon
termination of this Agreement for any reason, Vendor will provide City with copies of all
completed or partially completed documents prepared under this Agreement. In the event Vendor
has received access to City Information or data as a requirement to perform services hereunder,
Vendor will return all City provided data to City in a machine-readable format or other format
deemed acceptable to City.
5. Disclosure of Conflicts and Confidential Information.
5.1 Disclosure of Conflicts. Vendor hereby warrants to City that Vendor has made full
disclosure in writing of any existing or potential conflicts of interest related to Vendor's services
under this Agreement. In the event that any conflicts of interest arise after the Effective Date of this
Agreement, Vendor hereby agrees immediately to make full disclosure to City in writing.
5.2 Confidential Information. Vendor, for itself and its officers, agents and employees,
agrees that it will treat all information provided to it by City ("City Information") as confidential
and will not disclose any such information to a third party without the prior written approval of
City.
5.3 Public Information Act. City is a government entity under the laws of the State of
Texas and all documents held or maintained by City are subject to disclosure under the Texas Public
Information Act. In the event there is a request for information marked Confidential or Proprietary,
City will promptly notify Vendor. It will be the responsibility of Vendor to submit reasons objecting
to disclosure. A determination on whether such reasons are sufficient will not be decided by City,
but by the Office of the Attorney General of the State of Texas or by a court of competent
jurisdiction.
5.4 Unauthorized Access. Vendor must store and maintain City Information in a secure
manner and will not allow unauthorized users to access, modify, delete or otherwise corrupt City
Information in any way. Vendor must notify City immediately if the security or integrity of any
City Information has been compromised or is believed to have been compromised, in which event,
Vendor will, in good faith, use all commercially reasonable efforts to cooperate with City in
identifying what information has been accessed by unauthorized means and will fully cooperate
with City to protect such City Information from further unauthorized disclosure.
6. Rieht to Audit. Vendor agrees that City will, until the expiration of three (3) years after
final payment under this Agreement, or the final conclusion of any audit commenced during the said three
years, have access to and the right to examine at reasonable times any directly pertinent books, documents,
papers and records, including, but not limited to, all electronic records, of Vendor involving transactions
relating to this Agreement at no additional cost to City. Vendor agrees that City will have access during
normal working hours to all necessary Vendor facilities and will be provided adequate and appropriate work
space in order to conduct audits in compliance with the provisions of this section. City will give Vendor
reasonable advance notice of intended audits.
7. Indenendent Contractor. It is expressly understood and agreed that Vendor will operate
as an independent contractor as to all rights and privileges and work performed under this Agreement, and
not as agent, representative or employee of City. Subject to and in accordance with the conditions and
Vendor Services Agreement Page 2 of 12
City Secretary Contract No.
provisions of this Agreement, Vendor will have the exclusive right to control the details of its operations
and activities and be solely responsible for the acts and omissions of its officers, agents, servants,
employees, Vendors, and subcontractors. Vendor acknowledges that the doctrine of respondeat superior
will not apply as between City, its officers, agents, servants and employees, and Vendor, its officers, agents,
employees, servants, contractors, and subcontractors. Vendor further agrees that nothing herein will be
construed as the creation of a partnership or joint enterprise between City and Vendor. It is further
understood that City will in no way be considered a Co -employer or a Joint employer of Vendor or any
officers, agents, servants, employees, contractors, or subcontractors. Neither Vendor, nor any officers,
agents, servants, employees, contractors, or subcontractors of Vendor will be entitled to any employment
benefits from City. Vendor will be responsible and liable for any and all payment and reporting of taxes on
behalf of itself, and any of its officers, agents, servants, employees, contractors, or contractors.
8. Liability and Indemnification.
8.1 LIABILITY - VENDOR WILL BE LIABLE AND RESPONSIBLE FOR ANY
AND ALL PROPERTY LOSS, PROPERTY DAMAGE AND/OR PERSONAL INJURY,
INCLUDING DEATH, TO ANY AND ALL PERSONS, OF ANY KIND OR CHARACTER,
WHETHER REAL OR ASSERTED, TO THE EXTENT CAUSED BY THE NEGLIGENT
ACT(S) OR OMISSION(S), MALFEASANCE OR INTENTIONAL MISCONDUCT OF
VENDOR, ITS OFFICERS, AGENTS, SERVANTS, EMPLOYEES, CONTRACTORS, OR
SUBCONTRACTORS.
8.2 GENERAL INDEMNIFICATION - VENDOR HEREBY COVENANTS AND
AGREES TO INDEMNIFY, HOLD HARMLESS AND DEFEND CITY, ITS OFFICERS,
AGENTS, SERVANTS AND EMPLOYEES, FROMAND AGAINST ANYAND ALL CLAIMS
OR LAWSUITS OFANYKIND OR CHARACTER, WHETHER REAL OR ASSERTED, FOR
EITHER PROPERTYDAMAGE OR LOSS (INCLUDINGALLEGED DAMAGE OR LOSS TO
VENDOR'S BUSINESS AND ANY RESULTING LOST PROFITS) AND/OR PERSONAL
INJURY, INCLUDING DEATH, TO ANY AND ALL PERSONS, ARISING OUT OF OR IN
CONNECTION WITH THIS AGREEMENT, TO THE EXTENT CAUSED BY THE
NEGLIGENT ACTS OR OMISSIONS OR MALFEASANCE OF VENDOR, ITS OFFICERS,
AGENTS, SERVANTS, EMPLOYEES, CONTRACTORS, OR SUBCONTRACTORS.
8.3 INTELLECTUAL PROPERTY INDEMNIFICATION — Vendor agrees to
defend, settle, or pay, at its own cost and expense, any claim or action against City for
infringement of any patent, copyright, trade mark, trade secret, or similar property right
arising from City's use of the software and/or documentation in accordance with this
Agreement, it being understood that this agreement to defend, settle or pay will not apply if
City modifies or misuses the software and/or documentation. So long as Vendor bears the
cost and expense of payment for claims or actions against City pursuant to this section,
Vendor will have the right to conduct the defense of any such claim or action and all
negotiations for its settlement or compromise and to settle or compromise any such claim;
however, City will have the right to fully participate in any and all such settlement,
negotiations, or lawsuit as necessary to protect City's interest, and City agrees to cooperate
with Vendor in doing so. In the event City, for whatever reason, assumes the responsibility
for payment of costs and expenses for any claim or action brought against City for
infringement arising under this Agreement, City will have the sole right to conduct the
defense of any such claim or action and all negotiations for its settlement or compromise and
to settle or compromise any such claim; however, Vendor will fully participate and cooperate
with City in defense of such claim or action. City agrees to give Vendor timely written notice
Vendor Services Agreement Page 3 of 12
City Secretary Contract No.
of any such claim or action, with copies of all papers City may receive relating thereto.
Notwithstanding the foregoing, City's assumption of payment of costs or expenses will not
eliminate Vendor's duty to indemnify City under this Agreement. If the software and/or
documentation or any part thereof is held to infringe and the use thereof is enjoined or
restrained or, if as a result of a settlement or compromise, such use is materially adversely
restricted, Vendor will, at its own expense and as City's sole remedy, either: (a) procure for
City the right to continue to use the software and/or documentation; or (b) modify the
software and/or documentation to make it non -infringing, provided that such modification
does not materially adversely affect City's authorized use of the software and/or
documentation; or (c) replace the software and/or documentation with equally suitable,
compatible, and functionally equivalent non -infringing software and/or documentation at no
additional charge to City; or (d) if none of the foregoing alternatives is reasonably available
to Vendor terminate this Agreement, and refund all amounts paid to Vendor by City,
subsequent to which termination City may seek any and all remedies available to City under
law.
Assignment and Subcontracting.
9.1 Assignment. Vendor will not assign or subcontract any of its duties, obligations
or rights under this Agreement without the prior written consent of City. If City grants consent to
an assignment, the assignee will execute a written agreement with City and Vendor under which
the assignee agrees to be bound by the duties and obligations of Vendor under this Agreement.
Vendor will be liable for all obligations of Vendor under this Agreement prior to the effective date
of the assignment.
9.2 Subcontract. If City grants consent to a subcontract, the subcontractor will execute
a written agreement with Vendor referencing this Agreement under which subcontractor agrees to
be bound by the duties and obligations of Vendor under this Agreement as such duties and
obligations may apply. Vendor must provide City with a fully executed copy of any such
subcontract.
10. Insurance. Vendor must provide City with certificate(s) of insurance documenting
policies of the following types and minimum coverage limits that are to be in effect prior to commencement
of any Services pursuant to this Agreement:
10.1 Coverage and Limits
(a) Commercial General Liability:
$1,000,000 - Each Occurrence
$2,000,000 - Aggregate
(b) Automobile Liability:
$1,000,000 - Each occurrence on a combined single limit basis
Coverage will be on any vehicle used by Vendor, or its employees, agents, or
representatives in the course of providing Services under this Agreement. "Any
vehicle" will be any vehicle owned, hired and non -owned.
Vendor Services Agreement Page 4 of 12
City Secretary Contract No.
10.2
(c) Worker's Compensation:
Statutory limits according to the Texas Workers' Compensation Act or any other
state workers' compensation laws where the Services are being performed
Employers' liability
$100,000 -
Bodily Injury by accident; each accident/occurrence
$100,000 -
Bodily Injury by disease; each employee
$500,000 -
Bodily Injury by disease; policy limit
(d) Professional Liability (Errors & Omissions):
$1,000,000 - Each Claim Limit
$1,000,000 - Aggregate Limit
Professional Liability coverage may be provided through an endorsement to the
Commercial General Liability (CGL) policy, or a separate policy specific to
Professional E&O. Either is acceptable if coverage meets all other requirements.
Coverage must be claims -made, and maintained for the duration of the contractual
agreement and for two (2) years following completion of services provided. An
annual certificate of insurance must be submitted to City to evidence coverage.
General Requirements
(a) The commercial general liability and automobile liability policies must
name City as an additional insured thereon, as its interests may appear. The term
City includes its employees, officers, officials, agents, and volunteers in respect to
the contracted services.
(b) The workers' compensation policy must include a Waiver of Subrogation
(Right of Recovery) in favor of City.
(c) A minimum of Thirty (30) days' notice of cancellation or reduction in
limits of coverage must be provided to City. Ten (10) days' notice will be
acceptable in the event of non-payment of premium. Notice must be sent to the
Risk Manager, City of Fort Worth, 200 Texas Street, Fort Worth, Texas 76102,
with copies to the Fort Worth City Attorney at the same address.
(d) The insurers for all policies must be licensed and/or approved to do
business in the State of Texas. All insurers must have a minimum rating of A- VII
in the current A.M. Best Key Rating Guide, or have reasonably equivalent financial
strength and solvency to the satisfaction of Risk Management. If the rating is
below that required, written approval of Risk Management is required.
(e) Any failure on the part of City to request required insurance
documentation will not constitute a waiver of the insurance requirement.
Vendor Services Agreement Page 5 of 12
City Secretary Contract No.
(f) Certificates of Insurance evidencing that Vendor has obtained all required
insurance will be delivered to the City prior to Vendor proceeding with any work
pursuant to this Agreement.
I I . Compliance with Laws, Ordinances, Rules and Regulations. Vendor agrees that in the
performance of its obligations hereunder, it will comply with all applicable federal, state and local laws,
ordinances, rules and regulations and that any work it produces in connection with this Agreement will also
comply with all applicable federal, state and local laws, ordinances, rules and regulations. If City notifies
Vendor of any violation of such laws, ordinances, rules or regulations, Vendor must immediately desist
from and correct the violation.
12. Non -Discrimination Covenant. Vendor, for itself, its personal representatives, assigns,
contractors, subcontractors, and successors in interest, as part of the consideration herein, agrees that in the
performance of Vendor's duties and obligations hereunder, it will not discriminate in the treatment or
employment of any individual or group of individuals on any basis prohibited by law. IF ANY CLAIM
ARISES FROM AN ALLEGED VIOLATION OF THIS NON-DISCRIMINATION COVENANT
BY VENDOR, ITS PERSONAL REPRESENTATIVES, ASSIGNS, CONTRACTORS,
SUBCONTRACTORS, OR SUCCESSORS IN INTEREST, VENDOR AGREES TO ASSUME
SUCH LIABILITY AND TO INDEMNIFY AND DEFEND CITY AND HOLD CITY HARMLESS
FROM SUCH CLAIM.
13. Notices. Notices required pursuant to the provisions of this Agreement will be
conclusively determined to have been delivered when (1) hand -delivered to the other party, its agents,
employees, servants or representatives, (2) delivered by facsimile with electronic confirmation of the
transmission, or (3) received by the other party by United States Mail, registered, return receipt requested,
addressed as follows:
To CITY:
City of Fort Worth
Attn: Assistant City Manager
100 Fort Worth Trail
Fort Worth, TX 76102
Facsimile: (817) 392-8654
With copy to Fort Worth City Attorney's Office at
same address
To VENDOR:
RLC Controls, Inc.
Michael Cunningham, President
8115 Hicks Hollow
McKinney, TX 75071
Facsimile:
14. Solicitation of Emolovees. Neither City nor Vendor will, during the term of this
Agreement and additionally for a period of one year after its termination, solicit for employment or employ,
whether as employee or independent contractor, any person who is or has been employed by the other
during the term of this Agreement, without the prior written consent of the person's employer.
Notwithstanding the foregoing, this provision will not apply to an employee of either party who responds
to a general solicitation of advertisement of employment by either party.
15. Governmental Powers. It is understood and agreed that by execution of this Agreement,
City does not waive or surrender any of its governmental powers or immunities.
Vendor Services Agreement Page 6 of 12
City Secretary Contract No.
16. No Waiver. The failure of City or Vendor to insist upon the performance of any term or
provision of this Agreement or to exercise any right granted herein does not constitute a waiver of City's or
Vendor's respective right to insist upon appropriate performance or to assert any such right on any future
17. Governing Law / Venue. This Agreement will be construed in accordance with the laws
of the State of Texas. If any action, whether real or asserted, at law or in equity, is brought pursuant to this
Agreement, venue for such action will lie in state courts located in Tarrant County, Texas or the United
States District Court for the Northern District of Texas, Fort Worth Division.
18. Severability. If any provision of this Agreement is held to be invalid, illegal or
unenforceable, the validity, legality and enforceability of the remaining provisions will not in any way be
affected or impaired.
19. Force Maieure. City and Vendor will exercise their best efforts to meet their respective
duties and obligations as set forth in this Agreement, but will not be held liable for any delay or omission
in performance due to force majeure or other causes beyond their reasonable control, including, but not
limited to, compliance with any government law, ordinance, or regulation; acts of God; acts of the public
enemy; fires; strikes; lockouts; natural disasters; wars; riots; epidemics or pandemics; government action
or inaction; orders of government; material or labor restrictions by any governmental authority;
transportation problems; restraints or prohibitions by any court, board, department, commission, or agency
of the United States or of any States; civil disturbances; other national or regional emergencies; or any other
similar cause not enumerated herein but which is beyond the reasonable control of the Party whose
performance is affected (collectively, "Force Majeure Event"). The performance of any such obligation is
suspended during the period of, and only to the extent of, such prevention or hindrance, provided the
affected Party provides notice of the Force Majeure Event, and an explanation as to how it prevents or
hinders the Party's performance, as soon as reasonably possible after the occurrence of the Force Majeure
Event, with the reasonableness of such notice to be determined by the City in its sole discretion. The notice
required by this section must be addressed and delivered in accordance with Section 13 of this Agreement.
20. Headings not Controlling. Headings and titles used in this Agreement are for reference
purposes only, will not be deemed a part of this Agreement, and are not intended to define or limit the scope
of any provision of this Agreement.
21. Review of Counsel. The parties acknowledge that each party and its counsel have
reviewed and revised this Agreement and that the normal rules of construction to the effect that any
ambiguities are to be resolved against the drafting party will not be employed in the interpretation of this
Agreement or its Exhibits.
22. Amendments / Modifications / Extensions. No amendment, modification, or extension
of this Agreement will be binding upon a party hereto unless set forth in a written instrument, which is
executed by an authorized representative of each party.
23. Counterparts. This Agreement may be executed in one or more counterparts and each
counterpart will, for all purposes, be deemed an original, but all such counterparts will together constitute
one and the same instrument.
24. W rrantv of Services. Vendor warrants that its services will be of a high quality and
conform to generally prevailing industry standards. City must give written notice of any breach of this
warranty within thirty (30) days from the date that the services are completed. In such event, at Vendor's
Vendor Services Agreement Page 7 of 12
City Secretary Contract No.
option, Vendor will either (a) use commercially reasonable efforts to re -perform the services in a manner
that conforms with the warranty, or (b) refund the fees paid by City to Vendor for the nonconforming
services.
25. Immigration Nationalitv Act. Vendor must verify the identity and employment eligibility
of its employees who perform work under this Agreement, including completing the Employment
Eligibility Verification Form (I-9). Upon request by City, Vendor will provide City with copies of all 1-9
forms and supporting eligibility documentation for each employee who performs work under this
Agreement. Vendor must adhere to all Federal and State laws as well as establish appropriate procedures
and controls so that no services will be performed by any Vendor employee who is not legally eligible to
perform such services. VENDOR WILL INDEMNIFY CITY AND HOLD CITY HARMLESS FROM
ANY PENALTIES, LIABILITIES, OR LOSSES DUE TO VIOLATIONS OF THIS PARAGRAPH
BY VENDOR, VENDOR'S EMPLOYEES, CONTRACTORS, SUBCONTRACTORS, OR
AGENTS. City, upon written notice to Vendor, will have the right to immediately terminate this Agreement
for violations of this provision by Vendor.
26. Ownership of Work Product. City will be the sole and exclusive owner of all reports,
work papers, procedures, guides, and documentation that are created, published, displayed, or produced in
conjunction with the services provided under this Agreement (collectively, "Work Product"). Further, City
will be the sole and exclusive owner of all copyright, patent, trademark, trade secret and other proprietary
rights in and to the Work Product. Ownership of the Work Product will inure to the benefit of City from
the date of conception, creation or fixation of the Work Product in a tangible medium of expression
(whichever occurs first). Each copyrightable aspect of the Work Product will be considered a "work -made -
for -hire" within the meaning of the Copyright Act of 1976, as amended. If and to the extent such Work
Product, or any part thereof, is not considered a "work -made -for -hire" within the meaning of the Copyright
Act of 1976, as amended, Vendor hereby expressly assigns to City all exclusive right, title and interest in
and to the Work Product, and all copies thereof, and in and to the copyright, patent, trademark, trade secret,
and all other proprietary rights therein, that City may have or obtain, without further consideration, free
from any claim, lien for balance due, or rights of retention thereto on the part of City.
27. Signature Authoritv. The person signing this Agreement hereby warrants that they have
the legal authority to execute this Agreement on behalf of the respective party, and that such binding
authority has been granted by proper order, resolution, ordinance or other authorization of the entity. This
Agreement and any amendment hereto, may be executed by any authorized representative of Vendor. Each
party is fully entitled to rely on these warranties and representations in entering into this Agreement or any
amendment hereto.
28. Change in Companv Name or Ownership. Vendor must notify City's Purchasing
Manager, in writing, of a company name, ownership, or address change for the purpose of maintaining
updated City records. The president of Vendor or authorized official must sign the letter. A letter indicating
changes in a company name or ownership must be accompanied with supporting legal documentation such
as an updated W-9, documents filed with the state indicating such change, copy of the board of director's
resolution approving the action, or an executed merger or acquisition agreement. Failure to provide the
specified documentation so may adversely impact future invoice payments.
29. No Bovcott of Israel. If Vendor has fewer than 10 employees or this Agreement is for
less than $100,000, this section does not apply. Vendor acknowledges that in accordance with Chapter
2271 of the Texas Government Code, the City is prohibited from entering into a contract with a company
for goods or services unless the contract contains a written verification from the company that it: (1) does
not boycott Israel; and (2) will not boycott Israel during the term of the contract. The terms "boycott Israel"
Vendor Services Agreement Page 8 of 12
City Secretary Contract No.
and "company" has the meanings ascribed to those terms in Section 2271 of the Texas Government Code.
By signing this Agreement, Vendor certifies that Vendor's signature provides written verification to
the City that Vendor: (1) does not boycott Israel; and (2) will not boycott Israel during the term of
the Agreement.
30. Prohibition on Bovcottina Energv Comuanies. Vendor acknowledges that in
accordance with Chapter 2276 of the Texas Government Code, City is prohibited from entering into a
contract for goods or services that has a value of $100,000 or more that is to be paid wholly or partly from
public funds of the City with a company with 10 or more full-time employees unless the contract contains
a written verification from the company that it: (1) does not boycott energy companies; and (2) will not
boycott energy companies during the term of the contract. To the extent that Chapter 2276 of the
Government Code is applicable to this Agreement, by signing this Agreement, Vendor certifies that
Vendor's signature provides written verification to City that Vendor: (1) does not boycott energy
companies; and (2) will not boycott energy companies during the term of this Agreement.
31. Prohibition on Discrimination Against Firearm and Ammunition Industries. Vendor
acknowledges that except as otherwise provided by Chapter 2274 of the Texas Government Code, City is
prohibited from entering into a contract for goods or services that has a value of $100,000 or more that is
to be paid wholly or partly from public funds of the City with a company with 10 or more full-time
employees unless the contract contains a written verification from the company that it: (1) does not have a
practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade
association; and (2) will not discriminate during the term of the contract against a firearm entity or firearm
trade association. To the extent that Chapter 2274 of the Government Code is applicable to this
Agreement, by signing this Agreement, Vendor certifies that Vendor's signature provides written
verification to City that Vendor: (1) does not have a practice, policy, guidance, or directive that
discriminates against a firearm entity or firearm trade association; and (2) will not discriminate
against a firearm entity or firearm trade association during the term of this Agreement.
32. Electronic Signatures. This Agreement may be executed by electronic signature, which
will be considered as an original signature for all purposes and have the same force and effect as an original
signature. For these purposes, "electronic signature" means electronically scanned and transmitted versions
(e.g. via pdf file or facsimile transmission) of an original signature, or signatures electronically inserted via
software such as Adobe Sign.
33. Entirety of Agreement. This Agreement contains the entire understanding and agreement
between City and Vendor, their assigns and successors in interest, as to the matters contained herein. Any
prior or contemporaneous oral or written agreement is hereby declared null and void to the extent in conflict
with any provision of this Agreement.
(signature page follows)
Vendor Services Agreement Page 9 of 12
City Secretary Contract No.
ACCEPTED AND AGREED:
CITY OF FORT WORTH:
By:
Name:WW4111a*3&h1 h4v 5, 2024 06:50 GMT+1)
Title: Assistant City Manager
Date: 1 1 /05/2024
APPROVAL RECOMMENDED:
By: 9Ya4.-'Z
NameChF�i�to eaher (Nov 4, 202416:40 CST)
Title: Water Director
4,ovvvnggU
ATTEST: p F FORrpa�dd
04
Fg
dvo °=o
o d
°a sap
QQ�•n x6 .64
By:
Name: Jannette Good
Title: City Secretary
VENDOR:
RLC Controls, Inc.
Digitally signed by Michael
Michael Cunningham Cunningham
By:
Date: 2024.11.0412:56:59-06'00'
Name: Michael Cunningham
Title: President
CONTRACT COMPLIANCE MANAGER:
By signing I acknowledge that I am the person
responsible for the monitoring and administration of
this contract, including ensuring all performance and
reporting requirements.
By:
Name: Shata a Bergl d
Title: Contract Compliance Specialist
APPROVED AS TO FORM AND LEGALITY:
By:
Name• essika Williams
Title: Assistant City Attorney
CONTRACT AUTHORIZATION:
M&C: 24-0702
Form 1295:2024-1196249
OFFICIAL RECORD
CITY SECRETARY
FT. WORTH, TX
Vendor Services Agreement Page 10 of 12
City Secretary Contract No.
EXHIBIT A
SCOPE OF SERVICES
See next page.
Vendor Services Agreement Page 11 of 12
SCOPE OF SERVICES
Vendor will provide Programmable Logic Controller (PLC) Control Panel
Components and Control Systems Integration Services, as well as, the
maintenance and service of the PLC Control Panels within the Water
Department on an "as needed basis".
1.0 VENDOR RESPONSIBILITIES — Vendor will:
1.1 Provide the services of specialized personnel that meet all the
qualifications of a Process Control Systems Integrator (PCSI) who
shall perform all work necessary to select, furnish, configure,
customize, install, connect, calibrate devices to PLC control panels,
and ensure they are maintained and operating optimally following the
installation. This includes the development of function block
programming within the PLC controllers, programming HMI software
applications, and place into operation all process control system
instrumentation hardware.
1.2 Be capable of performing all tasks without the assistance of City
personnel.
1.3 Coordinate with Water Department staff for all scheduling,
installation, startup, and maintenance services.
1.4 Provide an estimate for repair in writing before proceeding with any
repair work. The estimate shall be provided to the City in a timely
manner.
1.5 Provide an estimate for replacement of the equipment, in lieu of
repair, upon request.
1.6 Ensure work assignments are authorized by the Water Department
designee before beginning to work.
1.7 Ensure the driver and all employees arriving at Water Department
locations have a valid identification card. The driver must have a valid
driver's license, and all other employees must have at least a state -
issued ID.
1.8 Be a member of the International Society of Automation (ISA) and
shall employ CCST certified technicians. ISA Membership and CCST
certification information shall be provided upon request.
Page 1 of 18
1.9 Be fully responsible for the safety of his workers and shall provide the
minimum described safety equipment as required by Occupational
Safety and Health Administration (OSHA). It is the responsibility of
Vendor to become familiar with the provisions of regulations
published by OSHA in the Federal Register; to perform all of the
responsibilities thereunder, and to indemnify and save harmless the
City of Fort Worth from any penalties resulting from Vendor's failure
to perform.
2.0 PERSONNEL AND SERVICE REQUIREMENTS
2.1 Services shall include the maintenance and upgrade of computer -
controlled systems and the devices associated to the control panels for
water treatment plant control systems.
2.2 The network architecture includes; Servers, computers, network
switches & routers on the network, Graphical user interfaces for using
HMI software, Programming code development for PLC and
integration of all existing field devices, and other communication
equipment with the City of Fort Worth Water Treatment Plant control
systems.
2.3 Due to the wide range of work to be performed within this contract,
compensation will be broken down into hourly rates for the various
employee classifications.
2.4 The unit price for hourly rates shall be full compensation for all
salaries, benefits, transportation costs, overhead, and profits. No
compensation will be provided for tools and testing equipment
necessary to perform work.
2.5 All PLC programming and HMI configuration shall be done in
accordance with the owner's current implementation conventions.
2.6 The PCSI Superintendent shall be an experienced employee whom
oversees every step of the construction process from planning to
completion.
2.7 Services shall include;
2.7.1 PLC & HMI Programming Services (Server, Client, Touch
Screen Interfaces)
Page 2 of 18
2.7.2 IT Network Configuration Services
2.7.3 AutoCAD Labor Services
2.7.4 SQL Database Management Services
2.7.5 Visual Basic Programming Services
2.7.6 PLC Control Panel Fabrication Services
2.7.7 PLC Control Panel Installation Services
2.8 PLC & HMI Programming Services
2.8.1 Personnel:
2.8.1.1 Automation Technician: Entry-level employee whom
repairs and maintains programs in computer -controlled
systems within industrial facilities
2.8.1.2 Automation Specialist: Experienced employee whom
repairs and maintains programs in computer -controlled
systems within industrial facilities
2.8.2 Service Description: Vendor shall be capable of programming
all graphical user interfaces using HMI software. Programming
code development for PLC using software, and integration of
all existing field devices; and other communication equipment
with the City of Fort Worth Water Treatment Plant control
systems. They will also be responsible for performing PLC
troubleshooting and startup services.
2.9 IT Networking Configuration Services
2.9.1 Personnel:
2.9.1.1 IT Support Analyst: Experienced employee whom
maintains IT systems within industrial facilities
2.9.1.2 IT Network Analyst: Experienced employee whom
maintains IT networking systems within industrial
facilities
2.9.2 Service Description: Vendor shall be capable of all other PLC
IT programming, configuration, and integration, including, but
Page 3 of 18
not limited to, loading of software for process devices, Ethernet
configuration, and network communications.
2.10 AutoCAD Labor Services
2.10.1 Personnel:
2.10.1.1 Drafter Designer/Technician: Experienced employee
whom creates CAD drawings with accuracy
2.10.2 Service Description:
2.10.2.1 Vendor shall provide specialized personnel that meet
all qualifications for the AutoCAD application.
2.10.2.2 Specific CAD services will be used to document the
PLC panel layouts, plans, sections, details, etc.
2.10.2.3 The PLC plan shall include all I/O, database
references, point of origin or destination, and PLC
system internal address. All I/O associated with an 1/0
card shall be shown on a single sheet. Each field
device shall be identified by instrument tag, loop
number, and instrument range (if applicable). Vendor
shall provide panel wiring diagrams depicting wiring
within and on the panel as well as connections to
external devices. Equipment external to the control
panel and related external connections do not need to
be shown on the Panel Wiring Diagrams. Panel wiring
diagrams shall include power and signal connections,
UPS and normal power sources, all panel ancillary
equipment, protective devices, wiring and wire
numbers, and terminal blocks and numbering.
2.10.2.4 Field device wiring shall include the device ISA-tag
and a unique numeric identifier.
2.10.2.5 The diagrams shall identify all device terminal points
that the system connects to, including terminal points
where I/O wiring lands on equipment not supplied by
the PCSI.
2.10.2.6 I/O wiring shall be numbered with rack number, slot
Page 4 of 18
number, and point number.
2.10.2.7 Two -wire and four -wire equipment shall be clearly
identified, and power sources noted.
2.10.2.8 Panel drawings shall be 11" x 17" minimum in size.
2.11 SQL Database Management Services
2.11.1 Personnel:
2.11.1.1 SQL Database Administrator: Experienced employee
whom maintains configuration and maintenance of
SQL databases
2.11.2 Service Description: Configuration, management, and
troubleshooting of SQL databases.
2.12 Visual Basic Programming Services
2.12.1 Personnel:
2.12.1.1 Visual Basic Developer: Experienced employee whom
modifies Human Machine Interface displays using
Visual Basic
2.12.2 Service Description: Able to program in language to include,
but not limited to, C++, Python, and Structure Texts.
2.13 PLC Control Panel Fabrication Services
2.13.1 Personnel:
2.13.1.1 Panel Production Technician: Experienced employee
whom assembles control panels
2.13.1.2 Panel Designer: Experienced employee whom
determines location to mount PLC and components to
control panels
2.13.2 Service Description: Be able to fabricate and manufacture
custom PLC control panels as needed to install within the
facilities. Panels shall be custom fabricated, assembled,
installed and placed in proper operating condition.
Page 5 of 18
2.13.3 All material, equipment, labor, and services shall be provided in
a timely matter to be prepared for seasonal flow fluctuations.
2.13.3.1 Control panels shall be furnished with wiring
diagrams which clearly show terminal numbers and
wire numbers as they actually are in the
instrumentation system.
2.13.3.2 Instrument panel wiring shall be such that each wire
installed has its own number designation at each end
and such that no number is repeated.
2.13.3.3 Provide equipment components and devices shall be
UL labeled wherever UL standards exist for such
equipment.
2.13.3.4 The completed control panel shall be UL Labeled in
accordance with UL 508, 508A or UL 698A,
whichever is the applicable UL standard for the
installed location of the panel where indicated on the
drawings.
2.13.3.5 A UL label shall be affixed to the inside of the
external door by the panel fabrication assembly.
2.14 PLC Controls Panel Installation Services
2.14.1 Personnel:
2.14.1.1 Instrumentation & Electrical (IE) Technician: Entry
employee whom installs programs, & troubleshoots
electrical and instrumentation related to computer -
controlled systems
2.14.1.2 Senior IE Technician: Experienced employee whom
installs programs, & troubleshoots electrical and
instrumentation related to computer -controlled systems
2.14.1.3 IE Supervisor: Experienced employee whom oversees
IE technicians working on equipment related to
computer -controlled systems
2.14.2 Service Description:
Page 6 of 18
2.14.2.1 Provide the services of work that shall include making
connections, including field connections and
interfacing between instrumentation, PLC controllers,
control devices, control panels and instrumentation
furnished.
2.14.2.2 The PCSI shall coordinate the sequence of complete
PLC panel removal along with all related equipment
and components to ensure the plants remain operable
in each area and there is no disruption of services.
2.14.2.3 The PCSI shall provide all auxiliary and accessory
devices necessary for system operation or performance
to interface with existing equipment. System design
shall allow for removing individual devices from
service without disruption or process.
3.0 MATERIAL REQUIREMENTS
3.1 The PCSI shall be capable of providing all necessary hardware to
custom fabricate control panels, including Schneider Electric Modicon
and Allen-Bradley PLC components, or approved equivalent products.
This also includes the touch screen operator interface panels (OIT)
and all other electrical components to produce a functioning control
panel.
3.2 Any materials, equipment, components and supplies required for
repairs and/or replacement of City equipment may be
requested/ordered from Vendor. Vendor will be compensated for
these materials at the unit price shown in Exhibit `B."
3.3 Unless otherwise approved by the City, all materials, components, and
equipment must be new.
3.4 A copy of the invoice price for materials, equipment, components, and
supplies from the manufacturer shall accompany the invoice to the
City.
3.5 The products available for ordering shall include, but are not limited
to:
3.5.1 Schneider Electric Modicon PLC Components
Page 7 of 18
3.5.2 Allen Bradley PLC Components
3.5.3 Schneider Electric Touch Screen Operator Interface
3.5.3.1 Touch Screen Monitor — HMIDT732
3.5.3.2 Touch Screen CPU — HMIG3U
3.5.4 Hoffman Enclosures
3.5.4.1
A72H3724FS3PT
3.5.4.2
A726024ULPG
3.5.4.3
A727224ULPG
3.5.4.4
A722424 S SF SN4
3.5.4.5
A723636SSFSN4
3.5.4.6
A726024SSFSN4
3.5.4.7
A724824SSFSD
3.5.4.8
A722424FSDAG
3.5.4.9
A722424SSFSDAN4
3.5.4.10 A723636SSFSDAN4
3.5.4.11
A726024SSFSDADN4
3.5.5 Enclosure Lighting, LED
3.5.5.1
Hoffman - LEDAIS35
3.5.6 DC Power Supply
3.5.6.1 Phoenix Contact QUINT4-PS/lAC/24DC/10
3.5.6.2 Phoenix Contact QUINT4-PS/lAC/24DC/20
3.5.6.3 Phoenix Contact QUINT4-PS/IAC/24DC/40
3.5.6.4 Phoenix Contact QUINT4-UPS/24DC/24DC/5
3.5.6.5 Phoenix Contact QUINT4-UPS/24DC/24DC/10
3.5.6.6 Phoenix Contact QUINT4-UPS/24DC/24DC/20
3.5.6.7 Phoenix Contact UPS-BAT/LI-ION/24DC/120WH
Page 8 of 18
3.5.6.8 Phoenix Contact UPS-BAT/LI-ION/24DC/924WH
3.5.6.9 Phoenix Contact QUINT4-UP/24DC/5
3.5.6.10 Phoenix Contact QUINT4-UP/24DC/10
3.5.6.11 Phoenix Contact QUINT4-UP/24DC/20
3.5.7 UPS 120V
3.5.7.1 APC UPS SRT2200XLA
3.5.7.2 APC Battery Tower SRT72BP
3.5.7.3 APC Relay Card AP9613
3.5.7.4 UPS Bypass Switch APC SBP2200 RM
3.5.8 Extreme Network Switch
3.5.8.1 Model 16801
3.5.8.2 Model 16802
3.5.8.3 Model 16803
3.5.8.4 Model 16804
3.5.9 GE MDS Orbit MCR - MXNCL9CN4GYNNSIFISUNN
3.5.1OTerminal Blocks, Relays, Surge Protection, Miscellaneous
3.5.10.1 Phoenix Contact Power Terminal 2966508
3.5.10.2 Phoenix Contact Relay Module 2966317
3.5.10.3 Phoenix Contact Surge protection 2838186
3.5.10.4 Phoenix Contact Terminal Block 3045198
3.5.10.5 Phoenix Contact Ground Block 3044157
3.5.10.6 Phoenix Contact Cover 3047028
3.5.10.7 Phoenix Contact Fuse Terminal 3046100
3.5.10.8 Phoenix Contact Feed Through terminal 3047701
3.5.10.9 Phoenix Contact Ground Modular Terminal 3046223
3.5.10.10 Schneider Electric Miniature Breaker M9F42103
Page 9 of 18
3.5.10.11 Schneider Electric Miniature Breaker M9F42105
3.5.10.12 Schneider Electric Miniature Breaker M9F42110
3.5.10.13 Schneider Electric Miniature Breaker M9F42120
4.0 BRAND NAME OR EQUAL
4.1 Any manufacturer's names, trade names, brand names, information
and/or catalog numbers listed in this specification are for information
and not intended to limit competition unless otherwise indicated.
Vendor may offer any brand for which he/she is an authorized
representative, which meets or exceeds the product specification for
any item(s). If prices are based on equivalent products, Vendor has
noted the manufacturer's product name and reference number in
Exhibit `B."
4.2 Unless Vendor clearly indicates in Exhibit `B" that the product being
offered is an "equal" product, the Vendor will provide the brand name
product.
4.3 The City shall have the sole right to determine equal products.
5.0 QUOTATION PROCESS-
5.1 Vendor will provide an itemized quotation for the labor, materials,
and all other costs in writing to the City of Fort Worth Water
Department.
5.1.1 The Department Contract Manager or designee shall provide
Vendor with the location, onsite contact, and general
description of the service request, so Vendor can come out and
review the services to be completed, and prepare an itemized
quote.
5.2 Vendor will submit an itemized price quotation to the Department
Contract Manager or designee for each project within five (5) business
days of the request for review by the Department Contract Manager or
designee, or at a time mutually agreed upon between Vendor and the
Department Contract Manager or designee. The quotation will be
evaluated for accuracy, demonstrated understanding of the project
scope of work, schedule, and price.
5.3 Vendor will provide a written itemized quote, based on the labor rates
and material costs listed in Exhibit `B."
Page 10 of 18
5.3.1 The price quote shall include:
5.3.1.1 Description of the work to be performed including the
type of service or products to be provided.
5.3.1.2 Itemized estimate of the materials.
5.3.1.3 Itemized labor costs including number of hours, pay
rates and worker classifications.
5.3.1.4 A timeline, including the proposed PLC panel(s)
installation date.
5.4 Vendor understands that the submission of a price quotation is
evidence that Vendor has familiarized himself/herself with the nature
and extent of the work and any local conditions that may, in any
manner, affect the scope of the work to be done, and the equipment,
materials, labor, etc. required.
5.5 If the Department Contract Manager or designee agrees/approves the
quote, they will issue a Department Purchase Order (PO).
5.6 Vendor will not begin work without a PO from the City.
5.7 City can return the quotation to Vendor for revision, if the itemized
pricing on the quote does not align with the pricing in the current
contract.
5.8 Vendor will Acknowledge receipt of the PO by contacting the
Department Contract Manger or designee by email or phone and
within two (2) business days to schedule a start date. Services shall
start within the timeframe mutually agreed to between Vendor and
Department Representative or designee or as determined by the
quotation.
5.9 Vendor will complete the work within the timeframe stated in the
price quotation and will notify the Department Representative or
designee upon completion of the services.
5.10 If Vendor determines the services being performed cannot be
completed in the timeframe specified in the price quotation, Vendor
will request additional time in writing. Any extensions must be
approved by City before Vendor continues services.
5.11 Vendor will not increase the original price quote for any delays
caused by Vendor.
5.12 Changes to Project Quotes:
Page 11 of 18
5.12.1 Vendor will immediately notify the Department Representative
or designee by email if additions, deletions, and/or revisions to
a job assignment are needed, and submit a revised itemized
quotation.
5.12.2 Under no circumstances shall Vendor proceed with changes to
the price quotation without written approval from the
Department Representative or designee.
5.12.3 The Project Quotation Change Request shall include the
following:
5.12.3.1 The adjustment in the project time, if applicable.
5.12.3.2 If the City requests to change a price quote due to a
change in the scope of work that would increase the
number of labor hours required or the amount of
materials required, Vendor will amend the original
quote and, upon approval by the Department
Representative of the amended price quote, a revised
Purchase Order will be issued to Vendor.
6.0 WARRANTY
6.1 Vendor will provide a one-year warranty on parts, equipment and
labor against all defects in materials and workmanship.
6.2 Warranty shall be full compensating for labor and materials to address
the warranty repair.
7.0 APPLICABLE CODES AND STANDARDS
7.1 All work shall be performed in strict accordance with all local, state,
and national codes, ordinances, and regulations governing the work
involved. Vendor is responsible for obtaining any and all permits
required by the City of Fort Worth, State of Texas, or any other entity
or governing body.
7.2 All inspections and tests shall utilize manufacturers' instruction
manuals applicable to each particular apparatus.
7.3 All inspections and tests shall be in accordance with the following
applicable codes and standards.
7.3.1 National Electric Code (NEC)
Page 12 of 18
7.3.2 National Electrical Manufacturer's Association (NEMA)
7.3.3 American Society for Testing and Materials (ASTM)
7.3.4 National Electrical Testing Association (META)
7.3.5 American National Standards Institute (ANSI)
7.3.6 State and Local Codes and Ordinances
7.3.7 Association of Edison Illuminating Companies (AEIC)
7.3.8 Occupational Safety and Health Act of 1970 (OSHA) Part
1910; Subpart S, 1910, 308
7.3.9 Underwriters Laboratories (UL) 508, the Standard of Safety
for Enclosures for Industrial Control Equipment
7.3.10 UL 508A, the Standard for Safety for Industrial Control Panels
7.3.11 UL 50 the Standard for Safety for Enclosures for Electrical
Equipment
7.3.12 ANSI/International Society of Automation (ISA)-5.06.01-2007
- Functional Requirements Documentation for Control
Software Applications.
7.3.13 ISA-TR20.00.01-2001 - Specification Forms for Process
Measurement and Control Instruments Part 1: General
Considerations Updated with 27 New Specification Forms in
2004-2005.
7.3.14 ISA-5.4-1991 Instrument Loop Diagrams.
7.3.15 ISA-20-1981 Specification Forms for Process Measurement
and Control Instruments, Primary Elements, and Control
Valves.
7.3.16 ISA-5.2-1976 (R1992) Binary Logic Diagrams for Process
Operations.
7.3.17 NEMA ICS 6 Enclosures for Industrial Controls and Systems
7.3.18 City of Fort Worth Standards
Page 13 of 18
8.0 TESTING AND CALIBRATION PROCEDURES
8.1 Vendor will maintain a written record of all work activities and
results, and provide a test report to the City.
8.2 Test reports shall be provided in PDF format. Test reports shall be
submitted to the City within 30 days of completion of the work.
8.3 Vendor will provide quality & control testing for all materials and
services provided prior to shipment/beginning of services as well and
a field demonstration test upon completion.
8.4 During the field demonstration test, Vendor will make adjustments to
the control system and repair as needed to provide proper operations
of the control system.
9.0 LOCATIONS & HOURS OF SERVICES
9.1 Hours of Services shall be as follows:
9.1.1 Normal business hours - Monday — Friday, 7AM-4PM.
9.1.2 Overtime -Monday —Thursday 4:01PM — 6:59AM
9.1.3 Weekends — Friday — Monday, 4:01PM — 6:59AM
9.1.4 Holiday hours shall be all day during the City -observed
holidays listed below:
9.1.4.1 New Year's Day
9.1.4.2 Martin Luther King Jr. Day
9.1.4.3 Memorial Day
9.1.4.4 Juneteenth
9.1.4.5 July 4th
9.1.4.6 Labor Day
9.1.4.7 Thanksgiving Thursday and the following Friday
9.1.4.8 Christmas Day
9.2 Vendor will be available nights, weekends, and holidays. All work
shall be considered routine work and performed during normal
business hours, unless, overtime is authorized by City of Fort Worth
Water Department.
9.3 The unit price for hourly rates shall be full compensation for all
Page 14 of 18
salaries, benefits, transportation costs, overhead, and profits. No
compensation will be provided for tools and testing equipment
necessary to perform work.
9.4 Vendor will respond to requests for services during regular business
hours within 24 hours of notice by the City.
9.5 All work deemed an emergency by the City of Fort Worth Water
Department shall be responded to within 1 hour of notice from the
City. Vendor will be prepared to mobilize additional work crews as
required, and prepared to work until the problem is resolved. Work
shall be measured and paid per employee on the site of the work
request, per hour to the nearest quarter hour.
9.6 Work will be performed at all City of Fort Worth Water &
Wastewater Treatment Facilities including: Village Creek, Holly,
Eagle Mountain, Rolling Hills, Westside, and at approximately 150
remote water pumping and monitored sites.
10.0 INVOICE AND PAYMENTS
10.1 Registration:
Vendor is required to register for direct deposit payments prior to
providing goods and/or services using the forms posted on the City's
website at
https://www.fortworthtexas.2ov/departments/finance/purchasin2/
register
10.2 Invoice:
The Vendor shall send invoices electronically to our centralized
Accounts Payable department invoice email address:
supplierinvoices &fortworthtexas.gov. This email address is not
monitored so please do not send correspondence to this email address.
The sole purpose of the supplier invoices email address is to receipt
and process supplier invoices.
Please include the following on the subject line of your e-mail: vendor
name, invoice number, and PO number, separated by an underscore
(ex: Example, Inc._123456_FW013-0000001234)
To ensure the system can successfully process your invoice in an
expedient manner, please adhere to the following requirements:
Page 15 of 18
All invoices must be either a PDF or TIFF format.
ii. Image quality must be at least 300 DPI (dots per inch).
iii. Invoices must be sent as an attachment (i.e. no invoice in the
body of the email).
iv. One invoice per attachment (includes PDFs). Multiple
attachments per email is acceptable but each invoice must be a
separate attachment.
V. Please do not send handwritten invoices or invoices that contain
handwritten notes.
vi. Dot matrix invoice format is not accepted.
vii. The invoice must contain the following information:
a. Supplier's Legal Name and Address;
b. Remit to Supplier Name and Address, if different;
c. Applicable City Department business unit# (i.e. FW013)
d. Complete City of Fort Worth PO number (i.e. the PO
number must contain all preceding zeros);
e. Invoice number;
f. Invoice date; and
viii. Invoices should be submitted after delivery of the goods or
services.
To prevent invoice processing delays, please do not send invoices by
mail and email and please do not send the same invoice more than
once by email to supplierinvoices(&fortworthtexas.eov. To check on
the status of an invoice, please contact the City Department ordering
the goods/services or the Central Accounts Payable Department by
email at: ZZ FIN AccountsPavable(&fortworthtexas.gov.
If you are unable to send your invoice as outlined above at this time,
please send your invoice to our centralized Accounts Payable
department instead of directly to the individual city department. This
will allow the city staff to digitize the invoice for faster processing.
Page 16 of 18
If electronic invoicing is not possible, you may send your paper
invoice to:
City of Fort Worth
Attn: FMS Central Accounts Payable
200 Texas Street
Fort Worth, Texas, 76102
The City's goal is to receive 100% of invoices electronically so that
all supplier payments are processed efficiently.
If Vendor has any questions, please contact the Accounts Payable
team at (817) 392-2451 or by email to
ZZ FIN AccountsPavable(a)fortworthtexas.2ov.
Vendor shall not include Federal, State of City sales tax in its
invoices. City shall furnish a tax exemption certificate upon Vendor's
request.
10.3 Payment:
All payment terms shall be "Net 30 Days" unless otherwise specified
in the Agreement.
11.0 UNIT PRICE ADJUSTMENT
Vendor may request that unit prices be adjusted for increases or decreases in
Vendor's cost during the contract period using the following procedure:
i. The Vendor must submit its price adjustment request in writing at
least 30 days before the requested effective period. The Vendor shall
provide written proof of cost increases with the price adjustment
request.
ii. If the City concludes that the rate increase being requested is
unacceptable, the City reserves the right to adjust the rate request, or
reject the rate request in its entirety and allow the contract to expire at
the end of the contract term. If the City elects not to exercise the
renewal option, the Purchasing Division reserves the right to issue a
new solicitation or procure the goods or services by any other
allowable means.
iii. Prices bid shall remain firm for the term of the Agreement and shall
include all associated freight and delivery costs, unless otherwise
specifically stated and agreed to by City.
Page 17 of 18
iv. Upon expiration of the Agreement term, Vendor agrees to hold over
under the same terms and conditions of the executed Agreement for a
reasonable period of time to allow the city to re -bid an agreement.
Page 18 of 18
City Secretary Contract No.
EXHIBIT B
PAYMENT SCHEDULE
See next page.
Vendor Services Agreement Page 12 of 12
Primary Responses
Success: All data is valid)
Status
Bid/N.
9
It-
Uom 0 ... tity
Brand N.-
end P.0
Numeric
Unit Pri.. Brand
Tort
and Part N..b.r offered
Total Cost
.a
Labor Rates
o.Bld
Required
(if ppli..bi.)
Success: All values provided
Bid
#1-1
Superintendent, Hourly Rate, Normal Hours,
HR 1
N/A
$ 104.00
N/A
$104.00
Monday -Friday, 7AM-4PM
Success: All values provided
Bid
#1.2
Automation Technician, Hourly Rate, Normal
HR 1
N/A
$ 78 00
N/A
$ 78 00
4P Hours, Monday -Friday, 7A!0 M
Success: All values provided
Bid
#1.3
Automation Specialist, Hourly Rate, Normal
HR 1
N/A
$ 130.00
N/A
$130.00
4P Hours, Monday -Friday, 7A!0 M
Success: All values provided
Bid
#11
IT Support Analyst, Hourly Rate, Normal
HR 1
N/A
$ 125.00
N/A
$125.00
Hours, Monday -Friday, 7AM-4PM
Success: All values provided
Bid
#1-5
IT Network Analyst, Hourly Rate, Normal
HR 1
N/A
$ 125.00
N/A
$125.00
Hours, Monday -Friday, 7AM-4PM
Success: All values provided
Bid
#1-6
Drafter Designer/Technician, Hourly Rate,
HR 1
N/A
$ 73 00
N/A
$ 73 00
Normal Hours, Monday -Friday, 7AM4PM
Success: All values provided
Bid
#1-7
SQL Database Administrator, Hourly Rate,
HR 1
N/A
$ 140.00
N/A
$ 140.00
Normal Hours, Monday -Friday, 7AM4PM
Success: All values provided
Bid
#1.8
Visual Basic Developer, Hourly Rate, Normal
HR 1
N/A
$ 140.00
N/A
$140.00
4P Hours, Monday -Friday, 7A!0 M
Success: All values provided
Bid
#1.9
Panel Production Technician, Hourly Rate,
HR 1
N/A
$ 73 00
N/A
$ 73 00
Normal Hours, Monday -Friday, 7AM4PM
Success: All values provided
Bid
#1-10
Panel Designer, Hourly Rate, Normal Hours,
HR 1
N/A
$ 73 00
N/A
$ 73 00
Monday -Friday, 7AM-4PM
Success: All values provided
Bid
#1-11
IE Technician, Hourly Rate, Normal Hours,
HR 1
N/A
$ 104.00
N/A
$ 104.00
Monday -Friday, 7AM-4PM
Success: All values provided
Bid
#1-12
Senior IE Technician, Hourly Rate, Normal
HR 1
N/A
$ 130.00
N/A
$130.00
Hours, Monday -Friday, 7AM-0PM
Success: All values provided
Bid
#1-13
IE Supervisor Hourly Rate, Hourly Rate,
HR 1
N/A
$ 140.00
N/A
$140.00
Normal Hours, Monday -Friday, 7AM4PM
Success: All values provided
Bid
#1-14
Superintendent, Hourly Rate, Overtime,
HR 1
N/A
$156.00
N/A
$156.00
Weekends, and City -observed holidays
Automation Technician, Hourly Rate,
Success: All values provided
Bid
#1-15
Overtime, Weekends, and City -observed
HR 1
N/A
$117.00
N/A
$117.00
holidays
Success: All values provided
Bid
#1-16
Automation Specialist, Hourly Rate, Overtime,
HR 1
N/A
$195.00
N/A
$195.00
Weekends, and City -observed holidays
Success: All values provided
Bid
#1-17
IT Support Analyst, Hourly Rate, Overtime,
HR 1
N/A
$187.50
N/A
$187.50
Weekends, and City -observed holidays
Success: All values provided
Bid
#1-18
IT Network Analyst, Hourly Rate, Overtime,
HR 1
N/A
$187.50
N/A
$187.50
Weekends, and City -observed holidays
Drafter Designer/Technician, Hourly Rate,
Success: All values provided
Bid
#1-19
Overtime, Weekends, and City -observed
HR 1
N/A
$109.50
N/A
$109.50
holidays
SQL Database Administrator, Hourly Rate,
Success: All values provided
Bid
#1-20
Overtime, Weekends, and City -observed
HR 1
N/A
$ 210.00
N/A
$ 210.00
holidays
Success: All values provided
Bid
#1-21
Visual Basic Developer, Hourly Rate, Overtime,
HR 1
N/A
$ 210.00
N/A
$ 210.00
Weekends, and City -observed holidays
Panel Production Technician, Hourly Rate,
Success: All values provided
Bid
#1-22
Overtime, Weekends, and City -observed
HR 1
N/A
$109.50
N/A
$109.50
holidays
Success: All values provided
Bid
#1-23
Panel Designer, Hourly Rate, Overtime,
HR 1
N/A
$109.50
N/A
$109.50
Weekends, and City -observed holidays
Success: All values provided
Bid
#1.24
IE Technician, Hourly Rate, Overtime,
HR 1
N/A
$156.00
N/A
$156.00
Weekends, and City -observed holidays
Success: All values provided
Bid
#1-25
Senior IE Technician, Hourly Rate, Overtime,
HR 1
N/A
$ 195.00
N/A
$195.00
Weekends, and City -observed holidays
IE Supervisor, Hourly Rate, Overtime,
Success:
All values provided
Bid
#1-26
Weekends, and City -observed holidays
HR
1
N/A
$ 210.00
N/A
$ 210.00
Schneider Electric Modicon PLC Pa is
Brand:
Success:
All values provided
Bid
#2-1
4slot back panel
EA
50
Schneider
Electric Pau
$407A0
BMEXBP0400
$20.35500
Number:
Brand'
Success:
All values provided
Bid
#2-2
8slot back panel
EA
50
Schneider
Electric Pau
$556.62
BMEXBP0800
$27.83100
Number:
Brand:
Success:
All values provided
Bid
#2-3
12 slot back panel
EA
100
Schneider
Electric Pau
$ 758.30
BMEXBP1200
$ 75,83040
Number:
Brand'
Success:
All values provided
Bid
#21
10 slot back panel
EA
100
Schneider
Electric Pau
$72209
BMEXBP1002
$72.20880
Number:
Brand:
Success:
All values provided
Bid
#2-5
M340 Level 2 CPU
EA
25
Schneider
Electric Pau
$234785
BMXP342020
$58.69620
_
Number:
Brand'
Success:
All values provided
Bid
#2-6
M580 Standby CPU
EA
25
Schneider
Electric Pau
$15.08734
BMEH584040
$377,183A0
Number:
Brand:
Success:
All values provided
Bid
#2-7
M580 CPU Level 2
EA
10
Schneider
Electric Pau
$ 7,53797
BMEP582020
$ 75.379 68
Number:
Brand'
Success:
All values provided
Bid
#2-8
M580 CPU Level 21E
EA
200
Schneider
Electric Pan
$720457
BMEP582040
$1,440,91440
Number:
Brand:
Success:
All values provided
Bid
#2-9
M580 CPU Level 3
EA
10
Schneider
Electric Pan
$961460
BMEP583020
$96,14604
Number:
Brand'
Success:
All values provided
Bid
#2-10
M580 CPU Level 3/E
EA
25
Schneider
Electric Pan
$11 408 58
BMEP583040
$ 285,214.50
Number:
_
Brand:
Success:
All values provided
Bid
#2-11
M580 CPU Level 41E
EA
25
Schneider
Electric Part
$17 624 66
BMEP584040
$ 440,616.60
Number:
Brand'
Success:
All values provided
Bid
#2-12
M580 CPU Level 51E
EA
25
Schneider
Electric Pan
$ 20.192 17
BMEP585040
$ 504,804.30
Number:
Brand'
Schneider
Success:
All values provided
Bid
#2-13
SO Flash Card
EA
200
Electric Pan
$ 910S2
BMXRMS004GPF
$182,164.80
Number:
BMXRMS004GP
Brand'
Success:
All values provided
Bid
#2-14
Power Supply
EA
200
Schneider
Electric Pan
$1,76628
BMXCPS4002
$353,256.00
Number:
Brand:
Success:
All values provided
Bid
#2-15
Network Card
EA
200
Schneider
Electric Pan
$ 2 119 96
BMEN000301
$ 423,991.20
Number:
Brand'
Success:
All values provided
Bid
#2-16
Ethernet 10 adapter
EA
100
Schneider
Electric Pan
$247103
BMECRA31210
$247,102.80
Number:
Brand:
Success:
All values provided
Bid
#2-17
Power Supply
EA
200
Schneider
Electric Pan
$82709
BMXCPS3500
$165,41T60
Number:
Brand'
Success:
All values provided
Bid
#2-18
Analog In card
EA
500
Schneider
Electric Pan
$87796
BMXAM10810
$438,978.00
Number:
Brand:
Success:
All values provided
Bid
#2-19
28pt Terminal
EA
1000
Schneider
Electric Pan
$5402
BMXFTB2800
$54.02400
Number:
Brand'
Success:
All values provided
Bid
#2-20
Analog out card
EA
500
Schneider
Electric Pan
$ 753.79
BMXAM00410
$ 376,896.00
Number:
Brand:
Success:
All values provided
Bid
#2-21
20pt Terminal
EA
1000
Schneider
Electric Pan
$5394
BMXFTB2010
$53.94000
Number:
Brand'
Success:
All values provided
Bid
#2-22
Digital In card
EA
100
Schneider
Electric Pan
$602.65
BMXDD13232
$60.26520
Number:
Brand:
Success:
All values provided
Bid
#2-23
Digital In card
EA
100
Schneider
Electric Pan
$ 398.66
BMXDA11602
$ 39,86640
_
Number:
Brand'
Success:
All values provided
Bid
#2-24
Digital In card
EA
500
Schneider
Electric Pan
$ 345.10
BMXDA11604
$172,548.00
Number:
Brand:
Success:
All values provided
Bid
#2-25
Digital in card
EA
100
Schneider
Electric Pan
$ 285.89
BMXDD11602
$ 28,588 80
_
Number:
Brand'
Success:
All values provided
Bid
#2-26
Wire Harness
EA
100
Schneider
Electric Pan
$14734
BMXFTW305
$14.73360
Number:
Brand:
Success:
All values provided
Bid
#2-27
Digital out card
EA
100
Schneider
Electric Pan
$ 502.73
BMXDRA0815
$ 50,272 80
_
Number:
Brand'
Success:
All values provided
Bid
#2-28
40pl Terminal
EA
100
Schneider
Electric Pan
$5934
BMXFTB4000
$5,93400
Number:
Brand:
Success:
All values provided
Bid
#2-29
Digital out card
EA
100
Schneider
Electric Part
$ 346.38
BMXDD01602
$ 34.638 00
_
Number:
Brand'
Success:
All values provided
Bid
#2-30
Digital out card
EA
500
Schneider
Electric Pan
$ 440.41
BMXDRA1605
$ 220,206.00
Number:
Brand'
Success:
All values provided
Bid
#2-31
Digital out card
EA
500
Schneider
Electric Part
$41894
BMXDRA0815
$209,470.00
Number:
Brand'
Success:
All values provided
Bid
#2-32
OPC UA card
EA
200
Schneider
Electric Pan
$223579
BMENUA0100
$447,158.40
Number:
Brand'
Success:
All values provided
Bid
#2-33
Fiber to Ethernet Card
EA
50
Schneider
Electric Part
$557.60
BMXNRP0200
$27.88020
_
Number:
Brand'
Success:
All values provided
Bid
#2-34
Power Supply
EA
100
Schneider
Electric Pan
$831.07
BMXCPS3020
$83.10720
Number:
Brand'
Success:
All values provided
Bid
#2-35
RTU Module
EA
200
Schneider
Electric Part
$ 1,389.70
BMXNOR0200H
$ 277,940.00
Number:
Allen-Bradley PLC Parts
BrandAIIen-
Succeas:
All values provided
Bid
#3-1
13 - Slot Chards
EA
10
Bradley Pan
Number: 1756-
$ 987A0
1756-A13
$ 9,870.96
A13
Brand' Allen -
Success:
All values provided
Bid
#3-2
10 - Slot Chests
EA
10
Bradley Pan
Number:1756-
$ 821 16
1756-A10
$ 8,211.60
A10
Brand' AIIen-
Success:
All values provided
Bid
#3-3
7 - Slot Chasis
EA
10
Bradley Part
$ 674,36
1756-A7
$ 6,743.64
Number:1756-A7
Brand' Allen-
Success:
All valuesprovided
Bid
#31
4-Slot Chasis
EA
10
Bradley Pan
$440.36
1756-A4
$4,403.64
Number:1756-A4
Brand' Allen -
Success:
All values provided
Bid
#3-5
Control Logix Power Supply
EA
10
Bradley Pau
Number:1756-
$1 47g 52
1756-PA75
$ 14,785 20
PA75
Brand' Allen -
Success:
All values provided
Bid
#3-6
Control Logix 8MB Controller
EA
10
Bradley Pan
Number: 1756-
$ 14 746 00
1756-1 73
$147,459.96
L73
Brand' Allen -
Success:
All values provided
Bid
#3-7
Control Logix Controller Battery
EA
10
Bradley Part
Number: 1756-
$ 167.70
1756-BA1
$ 1,67T00
BA
Brand' Allen -
Success:
All values provided
Bid
#3-8
Control Logix Ethernet Module
EA
10
Bradley Pan
Number: 1756-
$ 3,52304
1756-EN2T
$ 35.23044
EN2T
Brand' Allen -
Success:
All values provided
Bid
#3-9
Control Logllt Ethernet Module
EA
10
Bradley Part
Number: 1756-
$ 3,811.30
1756-EN2TR
$ 38.112 96
EN2TR
Brand' Allen -
Success:
All values provided
Bid
#3-10
Control Logix ControlNet Bridge Module
EA
10
Bradley Pan
Number: 1756-
$ 3,391 14
1756-CNB
$ 33.911 40
CNB
Brand' Allen -
Success:
All values provided
Bid
#3-11
Control Logix ControlNet Module
EA
10
Bradley Part
Number: 1756-
$ 3,244.49
1756-CN2
$ 32,444 88
CN2
Brand' AIIen-
Success:
All values provided
Bid
#3-12
ControlNet Bridge Redundant Module
EA
10
Bradley Pan
Number: 1756-
$454352
1756-CNBR/E
$45,43524
CNBR/E
Brand' Allen -
Success:
All values provided
Bid
#3-13
ControlNet Modular Repeater Adaptor
EA
10
Bradley Part
Number: 1786-
$2526.04
1786-RPA
$25,26036
RPA
Brand' Allen -
Success:
All values provided
Bid
#3-14
ControlNet Fiber Repeater
EA
10
Bradley Pan
Number: 1789-
$ 1 888 51
1786-RPFM
$ 18,885 10
RPFM
Brand' Allen-
Success:
All valuesprovided
Bid
#3-15
Control Logix Redundancy Module
EA
10
Bradley Part
Number: 1756-
$6,46615
1756-RM2
$64.66152
RM2
Brand' Allen-
Success:
All valuesprovided
Bid
#3-16
Control Logix Redundant Fiber Cable
EA
10
Bradley Pan
Number: 1756-
$22244
1756-RMC1
$2,224.44
RMC1
Brand' Allen -
Success:
All values provided
Bid
#3-17
Control Logix Redundancy Cable
EA
10
Bradley Part
Number: 1756-
$ 296S3
1756-RMC3
$ 2,969.28
RMC3
Brand' Allen -
Success:
All values provided
Bid
#3-18
Control Logix 16pt AC Input Module
EA
10
Bradley Pan
Number: 1756-
$ 773.30
1756-IA161
$ 7,733,04
IA161
Brand' Allen -
Success:
All values provided
Bid
#3-19
Control Logix 16pt DC isolated Input Module
EA
10
Bradley Part
Number: 1756-
$ 740.32
1756-IB161
$ 7,403,16
_
1B161
Brand' Allen -
Success:
All values provided
Bid
#3-20
Control Logix 16pt DC Isolated Output Module
EA
10
Bradley Pan
Number: 1756-
$ 966.88
1756-OB161
$ 9,668,76
OB161
Brand' Allen -
Success:
All values provided
Bid
#3-21
Control Logix 16pt AC Output Module
EA
10
Bradley Part
Number: 1756-
$ 86T96
1756-OA16
$ 8,679B0
OA16
Brand' Allen -
Success:
All values provided
Bid
#3-22
Control Logix apt AC Output Module
EA
10
Bradley Pan
Number: 1756-
$ 791.36
1756-OA8
$ 7,913.64
0A8
Brand' Allen -
Control Logix 8 Channel HART Analog Input
Bradley Part
Success:
All values provided
Bid
#3-23
Module
EA
10
Number1756-
:
$ 2001 70
1756-IFBH
$ 20,016 96
IF8H
Brand' Allen -
Control Logix 8 Channel HART Analog Output
Bradley Pan
Success:
All values provided
Bid
#3-24
Module
EA
10
Number: 1756-
$ 3,68546
1756-OF8H
$ 36,854 64
OF8H
Brand' Allen -
Control Logix 6 Channel Current Output
Bradley Part
Success:
All values provided
Bid
#3-25
Module
EA
10
Number: 1756-
$ 2 920 99
1756-OF81
$ 29,209 90
OF6CI
Brand' Allen -
Success:
All values provided
Bid
#3-26
Remweable Wing Arms for 10 Cards
EA
10
Bradley Pan
Number: 1756-
$113.81
1756-TBCH
$ 1,138.08
TBCH
BrandAllen-
Success:
All values provided
Bid
#3-27
Component Wing Arm
EA
10
Bradley Pan
Number: 1756-
$9210
1756-TBNH
$921.00
TBNH
Brand' Allen-
Success:
All valuesprovided
Bid
#3-28
Flex lOinput 6 output 24VDC Module
EA
10
Bradley Pan
Number: 1794-
$44485
1794-IBI0XOB6
$4,448.52
IBI0XOB6
Brand' Allen -
Success:
All values provided
Bid
#3-29
Flex ControlNet Adaptor
EA
10
Bradley Pan
Number: 1794-
$1 275.64
1794-ACN15
$12.756 36
ACN15
Brand' Allen-
Success:
All valuesprovided
Bid
#3-30
Flex i6pt DI Module
EA
10
Bradley Pan
Number: 1794-
$41855
1794-IB16
$4,185.50
11316A
Brand' Allen -
Success:
All values provided
Bid
#3-31
Flex i6pt DO Module
EA
10
Bradley Pan
Number: 1794-
$ 619.07
1794-OB16P
$ 6,190.70
OB16P A
Brand' Allen-
Success:
All valuesprovided
Bid
#3-32
Flex Bpi Al Module
EA
10
Bradley Pan
Number: 1794-
$281646
1794-IEBH
$28.16460
IE8H/A
Brand' Allen -
Success:
All values provided
Bid
#3-33
Flex 4pt AO Module
EA
10
Bradley Pan
Number: 1794-
$ 1 77503
1794-OF41
$17.750 30
OF4I A
Brand' A1len-
Success:
All values provided
Bid
#3-34
Compact Logix 5332E Controller
EA
10
Bradley Pan
Number: 1769-
$ q 03826
1769-1_33ER
$ 40.382 60
L32E
Brand' Allen -
Success:
All values provided
Bid
#3-35
Compact Logix 16p1120V AC Input Module
EA
10
Bradley Pan
Number: 1769-
$ 343.79
1769-IA16
$ 3,43T88
IA16
Brand' Allen -
Success:
All values provided
Bid
#3-36
Compact Logix 16pt 24V DC Input Module
EA
10
Bradley Pan
Number: 1760-
$ 289.66
1769-IQ16
$ 2,896.56
IQi6
Brand' Allen -
Success:
All values provided
Bid
#3-37
Compact Logix 16pt 120V AC Output Module
EA
10
Bradley Pan
Number: 1769-
$ 486.11
1769-OW16
$ 4,861.08
OWi6
Brand' Allen -
Success:
All values provided
Bid
#3-38
Compact Logix 16pt 24V DC Output Module
EA
10
Bradley Pan
Number: 1769-
$ 380.46
1769-OB16
$ 3,804.60
OB16
Brand' Allen -
Success:
All values provided
Bid
#3-39
Compact Logix 4pt Analog Input Module
EA
10
Bradley Pan
Number: 1769-
$589.33
1769-IF4
$5,893.32
IF4
Brand' A1len-
Success:
All values provided
Bid
#3-40
Compact Logix 6pt RTD Analog Input Module
EA
10
Bradley Pan
Number: 1769-
$127288
1769-IR6
$12.72876
IR6
Additional Panel Parts
Brand Name:
Schnelder
Success:
All values provided
Bid
#4-1
Monitor, Touch Screen
EA
20
Electric Part
$5,23967
HMIDT732
$104,793.36
Number:
HMIDT732
Brand Name:
Success:
All values provided
Bid
#4-2
CPU, Touch Screen
EA
20
Schnelder
Electric Part
$187670
HMIG3U
$37,53408
Number: HMIG31'
Brand Name:
Success:
All values provided
Bid
#4-3
Enclosure, Free Stand, Gray, Steel, 72x37x24
EA
20
Hoffman Part
Number:
$210845
A72H3724FS3PT
$42.16896
A72H3724FS3Pl
Brand Name:
Success:
All values provided
Bid
#4-0
Enclosure, Free Stand, Gray, Steel, 72x60x24
EA
20
Hoffman Part
Number:
$242665
A726024ULPG
$48.53304
A726024ULPG
Brand Name:
Success:
All values provided
Bid
#4-5
Enclosure, Free Stand, Gray, Steel, 72x24x24
EA
20
Hoffman Part
Number:
$269311
A727224ULPG
$53.86224
A727224ULPG
Brand Name:
Success:
All values
Bid
#4-6
Enclosure, Free Stand, Stainless Steel,
EA
50
Hoffman Part
$ 5,492.46
A722424SSFSN4
$ 274,623.00
provided
72x24x24
Number:
A722424SSFSN,
Brand Name -
Su .....
All values
Bid
#4-7
Enclosure, Free Stand, Stainless Steel,
EA
50
Hoffman Part
$ 787488
A723636SSFSN4
$ 393,744.00
provided
72x36x36
Number:
A723636SSFSN,
Brand Name -
Su .....
All values
Bid
#4-8
Enclosure, Free Stand, Stainless Steel,
EA
20
Hoffman Part
$10.586 06
A726024SSFSDN4
$ 211,721.20
provided
72x60x24
Number:
A726024SSFSN,
Brand Name:
Success:
All values
Bid
#4-9
Enclosure, Free Stand, Stainless Steel,
EA
20
Hoffman Part
$ g 57248
A724824SSFSD
$171,449.52
provided
72x48x24
Number:
A724824SSFSD
Brand Name:
Success:
All values provided
Bid
#4-10
Enclosure Lighting, LED
EA
200
Hoffman Part
Number:
$ 183.04
LEDAIS35
$ 36,607 20
LEDA1535
Brand Name:
Phoenix Conlacl
Success:
All values provided
Bid
#4-11
Power Supply, 10 Watt
EA
50
Part Number'
$ 283.96
QUINT4-PS/1AC/24DC/10
$14.197 80
QUINT4-
PS/1ACY24DC/1
Brand Name:
Phoenix Come
Success:
All values provided
Bid
#4-12
Power Supply, 20 watt
EA
100
Part Number'
$411.43
QUINT4-PS/1AC/24DC/20
$41.14320
QUINT4-
PS/1AC/24DC/2
Brand Name:
Phoenix Come
Success:
All values provided
Bid
#4-13
Power Supply, 40 watt
EA
100
Part Number'
$1,175 15
QUINT4-PS/1AC/24DC/40
$117,514.80
QUINT4-
PS/1AC/24DC/4
Brand Name:
Phoenix Conlacl
Success:
All values provided
Bid
#4-14
Power Supply, 5 watt, UPS
EA
25
Part Number'
QUINT4-
$ 439.39
QUINT4-UPS/24DC/24DC/5
$ 10,984 80
UPS124DC/24DC
5
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#4-15
Power Supply, 10 watt, UPS
EA
100
Part Number'
QUINT4-
$495.56
QUINT4-UPS/24DC/24DC/10
$49.55640
UPS124DC/24DC
110
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#A-16
Power Supply, 20 watt, UPS
EA
50
Part Number
QUINT4-
$579.95
QUINT4-UPS/24DC/24DC/20
$28.99740
UPS/24DC/24DC
120
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#4-17
Power Supply, 120 watt, hour battery
EA
50
Part Number' UPS-BAT/LI-
$887.05
1396415
$44,35250
I0N/24DC/120W
H
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#4-18
Power Supply, 924 watt, hour battery
EA
100
Part Number'
UPS-BAT/LI-
$6,754.87
UPS-BAT/LI-ION/24DC924WH
$675,487.00
ION/24DC/924W
H
Brand Name:
I
Phoenix Contact
Success:
All values provided
Bid
#4-19
Power Supply, 5 watt
EA
25
Part Number'
$407.05
QUINT4-CAP/24DC/5/4KJ
$10.17625
QUINT4-
UP/24DC/5
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#4-20
Power Supply, 10 watt
EA
100
Part Number
$728.32
QUINT -UPS/ 24DC/ 24DC/10/34AH
$72.83200
QUINT4-
UP/24DC/10
Brand Name:
Phoenix Contact
Success:
All values provided
Bid
#4-21
Power Supply, 20 watt
EA
50
Part Number'
$353.96
QUINT4-UPS/24DC/24DC/20
$17,69800
QUINT4-
UP/24DC/20
Brand Name:
Success:
All values provided
Bid
#4-22
Uninterruptible Power Supply (UPS), 120V
EA
200
APC part
Number:
$2,12587
SRT2200XLA
$425,174A0
SRT2200XLA
Brand Name:
Success:
All values provided
Bid
#4-23
Battery Tower
EA
200
APC Part
Number:
$ 973.58
SRT72BP
$194,716.80
SRT72BP
Brand Name:
Success:
All values provided
Bid
#4-24
Relay Card
EA
200
APC Part
$ 33T88
AP9613
$ 67.576 80
Number AP9613
Brand Name:
Success:
All values provided
Bid
#4-25
UPS Bypass Switch
EA
200
APC Part
Number:
$406.00
SBP2200 RM
$81,19920
SBP2200 RM
Brand Name:
Success:
All values provided
Bid
#4-26
Network Switch
EA
20
Extreme
Networks Pan
$ 1,766.18
16801
$ 35.323 68
Number: 16801
Brand Name:
Success:
All values provided
Bid
#4-27
Network Switch
EA
200
Extreme
Networks Pan
$2,00245
16802
$400,490.40
Number: 16802
Brand Name:
Success:
All values provided
Bid
#4-28
Network Switch
EA
10
Extreme Networks Part
$ 211940
16803
$ 21.194 04
Number: 16803
Brand Name:
Success:
All values provided
Bid
#4-29
Network Switch
EA
10
Extreme
Networks Pan
$259116
16804
$25.91160
Number 16804
Brand Name:
General Electric
Success:
All values provided
Bid
#4-30
MDS Orbit MCR Radio
EA
200
(GE)Pan
Number:
$2325.96
MXNCL9CN4GYNNSiFISUNN
$465,192.00
MXNCL9CN4GY
NNSIFISUNN
Brand Name:
T
Success:
All values provided
Bid
#4-31
Power Terminal
EA
1000
Phoenix Contact
Part Number'
$2657
2966508
$26.56800
2966508
Brand Name:
Success:
All values provided
Bid
#4-32
Relay Module
EA
1000
Phoenix Contact
Part Number'
$ 2411
2966317
$ 24,852 00
2966317
Brand Name:
Success:
All values provided
Bid
#4-33
Surge Protector
EA
1000
Phoenix Contact
Part Number'
$8809
2906798
$88.09000
28388186
Brand Name:
Success:
All values provided
Bid
#4-34
Terminal Block
EA
1000
Phoenix Contact
Part Number'
$ 1 74
3045198
$ 1,740.00
3045198
Brand Name:
Success:
All values provided
Bid
#4-35
Ground Block
EA
1000
Phoenix Contact
Part Number'
$5,14
3044157
$5,136.00
3044157
Brand Name:
Success:
All values provided
Bid
#4-36
Cover
EA
1000
Phoenix Contact
Part Number
$ 044
3047028
$ 444.00
3047028
Brand Name:
Success:
All values provided
Bid
#4-37
Fuse Terminal
EA
1000
Phoenix Contact
Part Number'
$ 772
3046100
$ 7,716.00
3046100
Brand Name:
Success:
All values provided
Bid
#4-38
Feed Through Terminal
EA
1000
Phoenix Contact
Part Number'
$ 1.56
3047701
$1,560.00
3047701
Brand Name:
Success:
All values provided
Bid
#4-39
Ground Modular Terminal
EA
1000
Phoenix Contact
Part Number'
$q85
3046223
$4,848.00
3046223
Brand Name:
Schnelder
Success:
All values provided
Bid
#410
Mini Breaker
EA
Soo
Electric Pan
$5873
M9F42103
$29.36400
Number:
M9F42103
Brand Name:
Schnelder
Success:
All values provided
Bid
#411
Mini Breaker
EA
Soo
Electric Pan
$5873
M9F42105
$29.36400
Number:
M9F42105
Brand Name:
Schneider
Success:
All values provided
Bid
#412
Mini Breaker
EA
500
Electric Pan
$5356
M9F42110
$26.77800
Number:
M9F42110
Brand Name:
Schnelder
Success:
All values provided
Bid
#413
Mini Breaker
EA
Soo
Electric Pan
$5356
M9F42120
$26.77800
Number:
M9F42120
I
Additional Responses
Success: All data is valid!
Numeric
Text
UOM
Quantity
Required
Brand Name
and Part
Uu.b.,
Unit Price
Brand and Part Number Offered
(if applicable)
To at Cost
Brand. Schneider
Success: All values provided #2-31
Digital out card
EA
500
Electric Part
Number.
$ 418 94
BMXDRA0815
$ 209,470.00
RMXNRAnRn-.
Brand. Allen-
All values provided #3-25
Control Logix 6 Channel Current Output Module
EA
10
Bradley Partess:
Number.1756-
$ 2,920.99
1756-OF81
$ 29,209.90
F6(I
Brand. Allen-
Sueeess: All values provided #3-30
Flex 16p[ DI Module
EA
10
Bradley Part
$41855
1794-1B16
$4,185.50
Number. 1794-
Brand Allen -
Success: All values provided #3-31
Flex 16pt DO Module
EA
10
Bradley Part
Number.1794-
$ 619.07
1794-OB16P
$ 6,190.70
OR16P A
Brand. Allen -
Success: All values provided #3-32
Flex Bpt Al Module
EA
10
Bradley Part
Number. 1794-
$2816.46
1794-IE8H
$28,164.60
IFABrand Allen -
Success: All values provided #3-33
Flex 4pt AO Module
EA
10
Bradley Part
Number.1794-
$ 1 775.03
1794-OF41
$ 17,750.30
OFdl A
Brand. Allen -
Success: All values provided #3-34
Compact Logix 5332E Controller
EA
10
Bradley Part
$ 4,038.26
1769-1 33ER
$ 40,382.60
Number. 1769-
F
Brand. alen-
Success: All values provided #3-38
Compact Logix 16pt 24V DC Output Module
EA
10
Bradley Part
Number.1769-
$ 380.46
1769-OB16
$ 3,804.60
OR16
Brand Name.
Success: All values provided #4-8
Enclosure, Free Stand, Stainless Steel, 72x60x24
EA
20
Hoffman Part
Number.
$ 10,586.06
A726024SSFSDN4
$ 211,721.20
A7�AWdAAFAN4
Brand. Allen -
Success: All values provided #3-7
Control Logix Controller Battery
EA
10
Bradley Part
$ 167.70
1756-BAI
$ 1,677.00
Number. 1756-BA
Brand. Allen -
Success: All values provided #3-14
ControlNet Fiber Repeater
EA
10
Bradley Part
$ 7 88g 51
1786-RPFM
$ 18,885.10
Number. 1789-
RPFM
Brand Name.
Success: All values provided #4-33
Surge Protector
EA
1000
Phoenix Contact
Part Number.
$ 88.09
2906798
$ 88,090.00
Band Name.
Success: All values provided #4-17
Power Supply, 120 watt, hour battery
EA
50
Phoenix Contact
Part Number.
$ 887 05
1396415
$ 44,352.50
Brand Name.
Success: All values provided #4-19
Power Supply, 5 watt
EA
25
Phoenix Contact
Part Number.
$ 407.05
DUINT4-CAP/24DC/5/4KJ
$ 10,176.25
NTA-
Brand Name.
Success: All values provided #4-20
Power Supply, 10 watt
EA
100
Phoenix Contact
Part Number.
$ 728 32
1OUINT-UPS/ 24DC/ 24DC/10/3.4AH
$ 72,832.00
Brand Name.
Success: All values provided #4-21
Power Supply, 20 watt
EA
50
Phoenix Contact
Part Number.
$ 353.96
DUINT4-UPS/24DC/24DC/20
$ 17,698.00
IINTd-
City of Fort Worth, Texas
Mayor and Council Communication
DATE: Tuesday, August 27, 2024 REFERENCE NO.: **M&C 24-0702
LOG NAME: 13P RFP 24-0141 PROGRAMMABLE LOGIC CONTROLLER PANELS AW WATER
SUBJECT:
(ALL) Authorize Execution of Non -Exclusive Agreements with Prime Controls, L.P. and RLC Controls, Inc.
for Programmable Logic Controller Panels and Control Systems Integration Services for the Water
Department in a Combined Annual Amount Up to $6,000,000.00 for the Initial Term and Authorize Four,
One -Year Renewals in the Same Amount and Adopt Appropriation Ordinances to Effect a Portion of
Water's Contribution to the Fiscal Years 2024-2028 Capital Improvements Program
RECOMMENDATION:
It is recommended that the City Council:
1. Authorize the execution of non-exclusive agreements with Prime Controls, L.P. and RLC Controls,
Inc. for programmable logic controller panels and control systems integration services for the Water
Department in a combined annual amount up to $6,000,000.00 for the initial term and authorize
four, one-year renewals in the same amount;
2. Adopt the attached appropriation ordinance adjusting estimated receipts and appropriations in the
Water & Sewer Revenue Bonds Series 2021 by increasing estimated receipts and appropriations in
the SCADA Replacement project (City Project No. 103086) in the amount of $1,000,000.00 and
decreasing estimated receipts and appropriations in the Unspecified — All Funds project (City
Project No. UNSPEC) by the same amount; and
3. Adopt the attached appropriation ordinance adjusting estimated receipts and appropriations in the
Water & Sewer Revenue Bonds Series 2024 by increasing estimated receipts and appropriations in
the SCADA Replacement project (City Project No. 103086) in the amount of $32,000,000.00 and
decreasing estimated receipts and appropriations in the Commercial Paper project (City Project No.
UCMLPR) by the same amount to effect a portion of Water's contribution to the Fiscal Years 2024-
2028 Capital Improvements Program.
DISCUSSION:
The Water Department approached the Purchasing Division for assistance in securing agreements for
programmable logic controller panels and control systems integration services used to replace, repair, and
maintain panels throughout the City of Fort Worth to ensure water control systems are operating optimally.
Purchasing issued a Request for Proposals (RFP) consisting of detailed specifications
including the required panel components, the service requirements to ensure all aspects of the control
system are maintained, and certification requirements such as UL-508 and UL-698 control panel facility
certifications and Human Machine Interface (HMI) platforms certifications including: Rockwell Automation,
Ignition Premier, and Schneider Electric Alliance to ensure the vendors' personnel are certified to perform
the work.
The RFP was advertised in the Fort Worth Star -Telegram on May 1, 2024, May 8, 2024, May 15, 2024,
and May 22, 2024. The City received four responses.
An evaluation panel consisting of representatives from the Water and Transportation and Public Works
Departments reviewed and scored the submittal using Best Value criteria. The individual scores were
averaged for each of the criteria and the final scores are listed in the table below. During the technical
evaluation, one proposer, Revere Control Systems, Inc., did not score at least 50\% of the total available
points for technical criteria and was deemed non -responsive in accordance with the proposal documents.
Proposer 11 Evaluation Factors 11
http://apps.cfwnet.org/ecouncil/printmc.asp?id=32409&print=true&DocType=Print 8/27/2024
Prime Controls,
L.P.
RLC Controls, Inc
Tesco Controls,
LLC
Revere Control
Systems, Inc.
Best Value Criteria:
Il a 11 b l c l d l
19.50 19.00110.00110.001
1115.001113.001 7.75 1 8.00 1
10.50 9.00 5.25 5.25
7.00 8.50 3.25 3.00
e
39.26
40.00
37.19
Proposer did not score
50\% of the
technical points;
therefore, cost was not
evaluated
Total Score
97.76
83.75
67.19
Proposer did not score
50\% of the
technical points;
therefore, cost was not
evaluated
a. Contractor's certified personnel that can maintain all aspects of a control system
b. Contractor's ability to fabricate large control system panels
c. Contractor's experience in water & wastewater treatment and large production treatment facilities,
calibration and startup services for control systems, IT networking system design experience, as well as,
database management skill sets
d. Contractor's approach to maintain or service PLC panels
e. Cost of products and services
After evaluation, the panel concluded that Prime Controls, L.P. and RLC Controls, Inc. present the best
value. Therefore, the panel recommends that Council authorize non-exclusive agreements with Prime
Controls, L.P. and RLC Controls, Inc. No guarantee was made that a specific amount of services would be
purchased. Staff certifies that the recommended vendors' proposals met specifications.
While the authorized spending represents the collective maximum amount allowed under these
agreements, the actual amount used will be based on the department's needs and available budget.
Funding is budgeted in the Water & Sewer Revenue Bonds Series 2021 and 2024 for the Water
Department.
Appropriations in this M&C also include the expenses already incurred in FY2024 related to the current
contract with Prime Controls (City Secretary Contract No. 59912) and its two pending renewals for a total
amount of $3,000,000.00.
DVIN-BE: This solicitation was reviewed by The Business Equity Division for available business equity
prospects according to the City's Business Equity Ordinance. There were limited business equity
opportunities available for the services/goods requested, therefore, no business equity goal was
established.
AGREEMENT TERMS: Upon City Council approval, the agreements shall begin upon execution and
expire one year from that date.
RENEWAL TERMS: The agreements may be renewed automatically for four (4) additional, one-year
terms. This action does not require specific City Council approval provided that the City Council has
appropriated sufficient funds to satisfy the City's obligations during the renewal term.
ADMINISTRATIVE CHANGE ORDER: An administrative change order or increase may be made by the
City Manager up to the amount allowed by relevant law and the Fort Worth City Code and does not
require specific City Council approval as long as sufficient funds have been appropriated.
It is the practice of the Water Department to appropriate its CIP plan throughout the Fiscal Year (FY),
instead of within the annual budget ordinance, as projects commence, additional funding needs are
identified, and to comply with bond covenants. The actions in the M&C will appropriate funds in support of
http://apps.cfwnet.org/ecouncil/printmc.asp?id=32409&print=true&DocType=Print 8/27/2024
the Water's portion of the City of Fort Worth's Fiscal Years 2024-2028 Capital Improvement Program; as
follows:
13P RFP 24-0141 PROGRAMMABLE LOGIC CONTROLLER PANELS AW WATER
Capital
FY2024 CIP
Budget Change
Revised
Fund
Project Name
AuthorityFY2024
Appropriations(Increase/Decrease)
Y2
Name
Budget
56019
— W&S
103086 —
Rev
SCADA
$0.00 This M&C
$1,000,000.00
$1,000,000.00
Bonds
REPLACMENT
Series
PROJECT
2021
56022
103086 -
- W&S
SCADA
Rev
REPLACMENT
$0.00 This M&C
$32,000,000.00
$32,000,000.00
Bonds
PROJECT
2024
Funding is budgeted in the Unspecified -All Funds project within the Water & Sewer Revenue Bonds
Series 2021 Fund and in the Commercial Paper project within the Water & Sewer Revenue Bonds Series
2024 for the purpose of funding the SCADA Replacement Project.
Funding for the SCADA Replacement project is depicted below:
Fund
Existing
Additional Project Total*
Appropriations
Appropriations
W&S Capital
Project —
$791,992.00
$0.00 $791,992.00
Fund 56002
W&S Rev
Bonds 2021
$875,097.00
$1,000,000.00 $1,875,097.00
— Fund 56019
W&S Rev
Bonds Series
$0.00
$32,000,000.000 $32,000,000.00
2024— Fund
56024
Project Total
$1,667,089.00
$33,000,0000.00 $34,667,089.00
*Numbers rounded for presentation purposes.
This project is located in ALL COUNCIL DISTRICTS.
FISCAL INFORMATION / CERTIFICATION:
The Director of Finance certifies that funds are currently available in the Unspecified -All Funds project
within the W&S Rev Bonds Series 2021 Fund and in the Commerical Paper project within the W&S Rev
Bonds Series 2024 Fund and upon approval of the above recommendations and adoption of the attached
appropriation ordinances, funds will be available in the W&S Rev Bonds Series 2021 and W&S Rev Bonds
Series 2024 Funds for the Scada Replacement Project project to support the above recommendations and
execution of the agreements. Prior to an expenditure being incurred, the Water Department has the
http://apps.cfwnet.org/ecouncil/printmc.asp?id=32409&print=true&DocType=Print 8/27/2024
responsibility of verifying the availability of funds.
BQN\\
FUND IDENTIFIERS (FIDsJ:
TO
Fund Department Account Project ProgramActivity Budget Reference # Amount
ID ID Year (Chartfield 2)
FROM
Fund Department Account Project ProgramActivity Budget Reference # Amount
ID ID Year (Chartfield 2)
CERTIFICATIONS:
Reginald Zeno (8517)
Submitted for Citv Manaqer's Office bv: Fernando Costa (6122)
Reginald Zeno (8517)
Oriqinatinq Department Head: Christopher Harder (5020)
Jo Ann Gunn (8525)
Additional Information Contact: Alyssa Wilkerson (8357)
ATTACHMENTS
1. 13P RFP 24-0141 PROGRAMMABLE LOGIC CONTROLLER PANELS AW WATER funds
availabilitv.pdf (CFW Internal)
2. Business Equity Waiver.Ddf (CFW Internal)
3. FID TABLE - Control Svstems Integration (WCF 08.02.24).xlsx (CFW Internal)
4. Form 1295- Prime Controls LP.pdf (CFW Internal)
5. Form 1295- RLC Controls, Inc.pdf (CFW Internal)
6. ORD.APP 13P RFP 24-0141 PROGRAMMABLE LOGIC CONTROLLER PANELS AW
WATER 56019 A024(r2).docx (Public)
7. ORD.APP 13P RFP 24-0141 PROGRAMMABLE LOGIC CONTROLLER PANELS AW
WATER 56022 A024(r3).docx (Public)
8. PBS CPN 103086.pdf (Public)
9. SAMs Report- Prime Controls LP.Ddf (CFW Internal)
10. SAMs Report- RLC Controls Inc.Ddf (CFW Internal)
11. SOS Documentation- Prime Controls, L.P..docx (CFW Internal)
12. SOS Documentation- RLC Controls, Inc.docx (CFW Internal)
http://apps.cfwnet.org/ecouncil/printmc.asp?id=32409&print=true&DocType=Print 8/27/2024