HomeMy WebLinkAboutContract 62685CSC No. 62685
FORT WORTH
CITY OF FORT WORTH
COOPERATIVE PURCHASE AGREEMENT
This Cooperative Purchase Agreement ("Agreement") is entered into by W-W Manufacturing CO.,
INC. ("Vendor") and the City of Fort Worth ("City"), a Texas home rule municipality.
The Cooperative Purchase Agreement includes the following documents which shall be construed in the
order of precedence in which they are listed:
1. This Cooperative Purchase Agreement;
2. Exhibit A — Seller's Price List;
3. Exhibit B — Cooperative Agency Contract TIPS 230501; and
4. Exhibit C -- Conflict of Interest Questionnaire
Exhibits A, B, and C, which are attached hereto and incorporated herein, are made a part of this
Agreement for all purposes. Vendor agrees to provide City with the services and goods included in
Exhibit A pursuant to the terms and conditions of this Cooperative Purchase Agreement, including all
exhibits thereto. If any provisions of the attached Exhibits conflict with the terms herein, are prohibited
by applicable law, conflict with any applicable rule, regulation or ordinance of City, the terms in this
Cooperative Purchase Agreement shall control.
City shall pay Vendor in accordance with the fee schedule in Exhibit A and in accordance with
the provisions of this Agreement. Total payment made under this Agreement for the first year by City
shall not exceed One Hundred Thousand Dollars ($100,000.00). Vendor shall not provide any
additional items or services or bill for expenses incurred for City not specified by this Agreement unless
City requests and approves in writing the additional costs for such services. City shall not be liable for
any additional expenses of Vendor not specified by this Agreement unless City first approves such
expenses in writing.
The term of this Agreement is effective beginning on the date signed by the Assistant City
Manager below ("Effective Date") and expires on July 31, 2025. City will have the option, in its sole
discretion, to renew this Agreement under the same terms and conditions, for up to one (1) one-year
renewal option(s) (each a "Renewal Term").
Vendor agrees that City shall, until the expiration of three (3) years after final payment under this
Agreement, or the final conclusion of any audit commenced during the said three years, have access to
and the right to examine at reasonable times any directly pertinent books, documents, papers and records,
including, but not limited to, all electronic records, of Vendor involving transactions relating to this
Agreement at no additional cost to City. Vendor agrees that City shall have access during normal
working hours to all necessary Vendor facilities and shall be provided adequate and appropriate work
space in order to conduct audits in compliance with the provisions of this section. City shall give Vendor
reasonable advance notice of intended audits.
Notices required pursuant to the provisions of this Agreement shall be conclusively determined
to have been delivered when (1) hand -delivered to the other party, its agents, employees, servants or
representatives or (2) received by the other party by United States Mail, registered, return receipt
requested, addressed as follows:
OFFICIAL RECORD
CITY SECRETARY
FT. WORTH, TX
To CITY:
To VENDOR:
City of Fort Worth W-W Manufacturing CO., INC.
Attn. William Johnson, Assistant City Manager Doug Eyster, CEO
100 Fort Worth Trail 8832 State Hwy 54
Fort Worth, TX 76102 Thomas, OK 73669
Facsimile: (817) 392-8654 Facsimile: NA
Email: douge@wwmanufacturing.com
With copy to Fort Worth City Attorney's Office at
same address
City is a government entity under the laws of the State of Texas and all documents held or
maintained by City are subject to disclosure under the Texas Public Information Act. To the extent the
Agreement requires that City maintain records in violation of the Act, City hereby objects to such
provisions and such provisions are hereby deleted from the Agreement and shall have no force or effect.
In the event there is a request for information marked Confidential or Proprietary, City shall promptly
notify Vendor. It will be the responsibility of Vendor to submit reasons objecting to disclosure. A
determination on whether such reasons are sufficient will not be decided by City, but by the Office of
the Attorney General of the State of Texas or by a court of competent jurisdiction.
The Agreement and the rights and obligations of the parties hereto shall be governed by, and
construed in accordance with the laws of the United States and state of Texas, exclusive of conflicts of
laws provisions. Venue for any suit brought under the Agreement shall be in a court of competent
jurisdiction in Tarrant County, Texas. To the extent the Agreement is required to be governed by any
state law other than Texas or venue in Tarrant County, City objects to such terms and any such terms are
hereby deleted from the Agreement and shall have no force or effect.
Nothing herein constitutes a waiver of City's sovereign immunity. To the extent the Agreement
requires City to waive its rights or immunities as a government entity; such provisions are hereby deleted
and shall have no force or effect.
To the extent the Agreement, in any way, limits the liability of Vendor or requires City to
indemnify or hold Vendor or any third party harmless from damages of any kind or character, City
objects to these terms and any such terms are hereby deleted from the Agreement and shall have no force
or effect.
The undersigned represents and warrants that he or she has the power and authority to execute
this Agreement and bind the respective Vendor.
CITY OF FORT WORTH:
By: William Johnson (J n 24, 202511:58 CST)
Name: William Johnson
Title: Assistant City Manager
Date:
APPROVAL RECOMMENDED:
CONTRACT COMPLIANCE MANAGER:
By signing I acknowledge that I am the person
responsible for the monitoring and administration
of this contract, including ensuring all performance
and reporting requirements.
By: -
Name: Allison McNamara
Title: Senior Public Events Manager
APPROVED AS TO FORM AND LEGALITY:
By: Michael Crum (Jan 23, 202506:23 CST)
,. I
U/
Name: Michael Crum
By:
Title: Public Events/Facilities
Director
Name: Jessika Williams
Title: Assistant City Attorney
s
o anq
pro l FORtNO
�o
CONTRACT AUTHORIZATION:
By:
M&C: NIA
Name: Jannette Goodall
va nIl nEza5d4�
Title: City Secretary
VENDOR:
W-WAknufactuning CO., INC.
By:
Name: Doug Eys rr
Title: CEO
OFFICIAL RECORD
CITY SECRETARY
FT. WORTH, TX
EXHIBIT A
Thomas, Ok - Duncan, OK - Livingston, TN
Retail Price List
Effective 7/3/23
Systems
Powder Coat Finish
Part #
Description
Retail
1312-310-000
300-5-10 W/3-SEC. CA
$ 22,151
1311-310-000
300-5-10 W/2-SEC. CA
$ 19,809
1314-310-000
300-10' COMPLETE
$ 23,094
1315-312-000
300-12' COMPLETE
$ 23,530
1313-310-000
300-5-10 39 FT. WORKING ALLEY
$ 10,620
1316-100-000
W-W EZ BOX w/SGL ALLEY
$ 11,913
1316-100-100
W-W EZ BOX w/SGL ALLEY H/S
$ 14,505
1316-100-200
W-W EZ BOX w/SGL ALLEY F/S
$ 16,715
1316-200-000
W-W EZ BOX w/DBL ALLEY
$ 17,528
1316-200-100
W-W EZ BOX w/DBL ALLEY H/S
$ 21,379
1316-200-200
W-W EZ BOX w/DBL ALLEY F/S
$ 23,650
Sweep Systems
1321-270-000
270 SWEEP SYSTEM
$ 11,743
1321-270-100
270 SWEEP SYSTEM W/H/S TUB & ALLEY
$ 13,654
1321-270-200
270 SWEEP SYSTEM W/F/S TUB & HS/ALLEY
$ 14,697
1321-271-000
270 SWEEP SYSTEM W/EG
$ 12,176
1321-271-100
270 SWEEP SYSTEM W/H/S TUB, ALLEY & EG
$ 14,132
1321-271-200
270 SWEEP SYSTEM W/F/S TUB & H/S ALLEY & EG
$ 15,039
1321-210-000
210 SWEEP SYSTEM
$ 11,010
1321-210-100
210 SWEEP SYSTEM W/H/S TUB & ALLEY
$ 12,728
1321-210-200
210 SWEEP SYSTEM W/F/S TUB & HS/ALLEY
$ 13,534
1321-211-000
210 SWEEP SYSTEM W/EG
$ 11,444
1321-211-100
210 SWEEP SYSTEM W/H/S TUB, ALLEY & EG
$ 13,206
1321-211-200
210 SWEEP SYSTEM W/F/S TUB & H/S ALLEY & EG
$ 13,875
1337-210-000
210 MODIFIED SYSTEM
$ 5,585
1337-210-100
210 MODIFIED SYSTEM H/S TUB & ALLEY
$ 6,869
1337-210-200
210 MODIFIED SYSTEM F/S TUB & H/S ALLEY
$ 7,675
1337-211-000
210 MODIFIED SYSTEM W/EG
$ 6,018
1337-211-100
210 MODIFIED SYSTEM H/S TUB, ALLEY & EG
$ 7,347
1337-211-200
210 MODIFIED SYSTEM F/S TUB & H/S ALLEY & EG
$ 8,016
1318-090-000
90 MOD. SWEEP
$ 5,407
1318-090-100
90 MOD. SWEEP H/S
$ 6,531
1318-090-200
90 MOD. SWEEP F/S
$ 7,005
1318-091-000
90 MOD. SWEEP w/LOADOUT
$ 6,076
1318-091-100
90 MOD. SWEEP w/LOADOUT H/S
$ 7,303
1318-091-200
90 MOD. SWEEP w/LOADOUT F/S
$ 7,778
Systems
Powder Coat Finish
Part #
Description
Retail
1323-270-000
270 SWEEP TUB ONLY
$ 3,692
1323-270-100
270 SWEEP TUB ONLY H/S
$ 4,589
1323-270-200
270 SWEEP TUB ONLY F/S
$ 5,283
1323-210-000
210 SWEEP TUB ONLY
$ 2,908
1323-210-100
210 SWEEP TUB ONLY H/S
$ 3,578
1323-210-200
210 SWEEP TUB ONLY F/S
$ 4,040
1326-000-000
SYSTEM V-TRAP
$ 1,244
1326-000-100
SYSTEM V-TRAP H/S
$ 1,466
1326-000-200
SYSTEM V-TRAP F/S
$ 1,790
1326-001-000
SYSTEM ELIM. GATE V-TRAP
$ 1,728
1326-001-100
SYSTEM ELIM. GATE V-TRAP H/S
$ 1,933
1326-001-200
SYSTEM ELIM. GATE V-TRAP F/S
$ 2,123
1300-001-001
SYSTEM SWEEP GATE LATCH
$ 203
1300-001-000
SYSTEM SWEEP GATE
$ 660
1300-001-100
SYSTEM SWEEP GATE H/S
$ 875
1300-001-200
SYSTEM SWEEP GATE H/S RH
$ 875
1300-002-000
SYSTEM SWEEP TUB ADPT. TOP
$ 125
1300-003-000
SYSTEM SWEEP TUB ADPT. BOTTOM
$ 125
1300-004-000
SYSTEM ELIMINATOR GATE
$ 771
1300-004-100
SYSTEM ELIMINATOR GATE H/S
$ 976
1300-004-200
SYSTEM ELIMINATOR GATE H/S RH
$ 976
1300-010-000
SYSTEM SWEEP SPREADER BOTTOM
$ 133
1300-011-000
SYSTEM SWEEP SPREADER TOP
$ 95
1300-100-000
SYSTEM SWEEP FRAME P-P
$ 556
1300-100-100
SYSTEM SWEEP FRAME P-P H/S
$ 784
1300-100-200
SYSTEM SWEEP FRAME P-P F/S
$ 1,015
1300-200-000
SYSTEM SWEEP FRAME P-C
$ 556
1300-200-100
SYSTEM SWEEP FRAME P-C H/S
$ 784
1300-200-200
SYSTEM SWEEP FRAME P-C F/S
$ 1,015
1300-300-001
SYSTEM SWEEP FRAME /LOADOUT C-C
$ 1,209
1300-300-101
SYSTEM SWEEP FRAME /LOADOUT C-C H/S
$ 1,437
1300-300-201
SYSTEM SWEEP FRAME /LOADOUT C-C F/S
$ 1,668
1300-100-001
SYSTEM SWEEP FRAME CATWALK BRKT.
$ 69
Express Corral
1880-100-001
EXPRESS+3 UPGRADE
$ 2,665
1880-100-002
EXPRESS+6 UPGRADE
$ 2,960
1880-101-000
EXPRESS CORRAL STD.
$ 25,687
1880-103-000
EXPRESS CORRAL +3
$ 27,960
1880-106-000
EXPRESS CORRAL +6
$ 31,025
1881-100-100
EXPRESS CORRAL GOOSNECK
$ 2,882
2322-023-000
TRIM STOCK HEADGATE L/H
$ 1,438
Alley
Powder Coat Finish
Part #
Description
Retail
2351-200-000
W-W CROWD ALLEY 3-SEC. CURVED 2-A/S
$ 7,537
2352-200-000
W-W CROWD ALLEY 2-SEC. CURVED 1-A/S
$ 5,252
2353-000-000
W-W CROWD ALLEY 3-SEC. STRAIGHT 2-A/S
$ 7,046
2354-200-000
W-W CROWD ALLEY 2-SEC. STRAIGHT 1-A/S
$ 4,924
2357-200-000
W-W 16' DBL ALLEY
$ 6,972
2357-200-100
W-W 16' DBL ALLEY H/S
$ 8,051
2356-000-000
W-W 16' STRAIGHT PANEL ALLEY
$ 2,982
2356-000-100
W-W 16' STRAIGHT PANEL ALLEY HALF SHEETED
$ 3,727
2356-200-100
W-W 16' "S" PANEL ALLEY HALF SHEETED
$ 4,798
Alley Componets
2333-500-000 CALF ALLEY PANEL SHORT 5' $ 246
2333-700-000
CLAF ALLEY PANEL LONG 7'
$ 281
2350-107-000
W-W CROWD ALLEY SHORT PANEL 7'
$ 667
2350-108-000
W-W CROWD ALLEY LONG PANEL 8'
$ 722
2350-108-100
W-W CROWD ALLEY STRAIGHT PANEL 8'
$ 722
2350-200-001
CA INTERIOR CALF BLOCK
$ 27
2350-200-002
CA LF/RR CALF BLOCK
$ 177
2350-200-003
CA KNUCKLE SOCKET TOP
$ 27
2350-200-004
CA KNUCKLE SOCKET BOTTOM
$ 27
2350-201-002
CA RF/LR CALF BLOCK
$ 177
2350-203-000
CA INTERIOR FRAME
$ 530
2350-204-000
CA LF/RR END FRAME
$ 530
2350-205-000
CA RF/LR END FRAME
$ 530
2350-400-000
PA ADJ ACF LEFT
$ 530
2350-400-002
PA ADJ ACF RIGHT
$ 530
2350-401-000
PA CALF BLOCK
$ 177
2350-403-000
W-W DBL ADJ ACF W/SLIDE POST
$ 897
2361-000-000
CLASSIC 32" ROLLING BLOCK DOOR
$ 1,203
2361-102-000
CLASSIC 32" TRACKLESS RBD
$ 1,503
2363-000-000
CLASSIC 38 1/2" ROLLING BLOCK DOOR
$ 1,307
2363-100-000
CLASSIC 38 1/2" ROLLING BLOCK DOOR P-P
$ 1,372
2363-101-000
CLASSIC 38 1/2" ADJ RDB P-P
$ 2,369
2363-102-000
CLASSIC 38 1/2" TRACKLESS RBD
$ 1,607
3311-504-000
CLASSIC 504 PANEL
$ 254
3311-504-100
CLASSIC 504 PANEL HALF SHEETED
$ 371
3311-504-200
CLASSIC 504 PANEL FULL SHEETED
$ 471
3311-508-000
CLASSIC 508 PANEL
$ 348
3311-508-100
CLASSIC 508 PANEL HALF SHEETED
$ 510
3311-508-200
CLASSIC 508 PANEL FULL SHEETED
$ 644
3311-510-500
CLASSIC 510 RAID. PANEL LEFT HALF SHEETED
$ 777
3311-510-501
CLASSIC 510 RAID. PANEL RIGHT HALF SHEETED
$ 777
3332-200-000
CLASSIC PANEL ALLEY STOP
$ 195
3332-210-000
CLASSIC CROWD ALLEY STOP
$ 203
3332-215-000
ICLASSIC OVERHEAD ALLEY STOP
$ 295
Chutes
Powder Coat Finish
Part #
Description
Retail
2311-111-000
BEEFMASTER CHUTE STD. SC HG Left
$ 6,548
2311-111-100
BEEFMASTER CHUTE STD. SC HG & SPLIT TG Left
$ 7,483
2311-111-200
BEEFMASTER CHUTE STD. SC HG & BI-FOLD TG Left
$ 7,483
2311-112-000
BEEFMASTER CHUTE STD. SC HG Right
$ 6,548
2311-112-100
BEEFMASTER CHUTE STD. SC HG & SPLIT TG Right
$ 7,483
2311-112-200
BEEFMASTER CHUTE STD. SC HG & BI-FOLD TG Right
$ 7,483
2311-131-000
BEEFMASTER CHUTE STD. 30" HG Left
$ 6,548
2311-131-100
BEEFMASTER CHUTE STD. 30" HG & SPLIT TG Left
$ 7,483
2311-131-100
BEEFMASTER CHUTE STD. 30" HG & SPLIT TG Right
$ 7,483
2311-131-200
BEEFMASTER CHUTE STD. 30" HG & BI-FOLD TG Left
$ 7,483
2311-132-000
BEEFMASTER CHUTE STD. 30" HG Right
$ 6,548
2311-132-200
BEEFMASTER CHUTE STD. 30" HG & BI-FOLD TG Right
$ 7,483
2311-211-000
BEEFMASTER CHUTE XL SC HG Left
$ 7,766
2311-211-100
BEEFMASTER CHUTE XL SC HG & SPLIT TG Left
$ 8,704
2311-211-200
BEEFMASTER CHUTE XL SC HG & BI-FOLD TG Left
$ 8,704
2311-212-000
BEEFMASTER CHUTE XL SC HG Right
$ 7,766
2311-212-100
BEEFMASTER CHUTE XL SC HG & SPLIT TG Right
$ 8,704
2311-212-200
BEEFMASTER CHUTE XL SC HG & BI-FOLD TG Right
$ 8,704
2311-231-000
BEEFMASTER CHUTE XL 30" HG Left
$ 7,766
2311-231-100
BEEFMASTER CHUTE XL 30" HG & SPLIT TG Left
$ 8,704
2311-231-200
BEEFMASTER CHUTE XL 30" HG & BI-FOLD TG Left
$ 8,704
2311-232-000
BEEFMASTER CHUTE XL 30" HG Right
$ 7,766
2311-232-100
BEEFMASTER CHUTE XL 30" HG & SPLIT TG Right
$ 8,704
2311-232-200
BEEFMASTER CHUTE XL 30" HG & BI-FOLD TG Right
$ 8,704
2311-311-000
BEEFMASTER CHUTE XL2VG SC HG Left
$ 7,522
2311-311-100
BEEFMASTER CHUTE XL2VG SC HG & SPLIT TG Left
$ 8,460
2311-311-200
BEEFMASTER CHUTE XL2VG SC HG & BI-FOLD TG Left
$ 8,460
2311-312-000
BEEFMASTER CHUTE XL2VG SC HG Right
$ 7,522
2311-312-100
BEEFMASTER CHUTE XL2VG SC HG & SPLIT TG Right
$ 8,460
2311-312-200
BEEFMASTER CHUTE XL2VG SC HG & BI-FOLD TG Right
$ 8,460
2311-331-000
BEEFMASTER CHUTE XL2VG 30" HG Left
$ 7,522
2311-331-100
BEEFMASTER CHUTE XL2VG 30" HG & SPLIT TG Left
$ 8,460
2311-331-200
BEEFMASTER CHUTE XL2VG 30" HG & BI-FOLD TG Left
$ 8,554
2311-332-000
BEEFMASTER CHUTE XL2VG 30" HG Right
$ 7,522
2311-332-100
BEEFMASTER CHUTE XL2VG 30" HG & SPLIT TG Right
$ 8,554
2311-332-200
BEEFMASTER CHUTE XL2VG 30" HG & BI-FOLD TG Right
$ 8,554
Part #
2311-411-000
2311-411-100
2311-411-200
2311-412-000
2311-412-100
2311-412-200
2311-431-000
2311-431-100
2311-431-200
2311-432-000
2311-432-100
2311-432-200
2316-111-100
2316-111-200
2316-611-100
2316-611-200
2316-621-100
2316-621-200
2313-011-000
2313-011-100
2313-012-000
2313-012-100
2312-101-000
2312-102-000
2343-100-000
2344-000-000
2344-200-000
2321-011-000
2321-012-000
2322-023-000
2322-024-000
2326-014-000
2325-150-000
2321-001-000
2321-002-000
2321-013-000
2322-031-000
2322-032-000
2322-041-000
2322-042-000
2211-090-010
2326-000-003
Chutes
Powder Coat Finish
Description
Retail
BEEFMASTER CHUTE XL1VG SC HG Left
$
7,522
BEEFMASTER CHUTE XL1VG SC HG & SPLIT TG Left
$
8,460
BEEFMASTER CHUTE XL1VG SC HG & BI-FOLD TG Left
$
8,460
BEEFMASTER CHUTE XL1VG SC HG Right
$
7,522
BEEFMASTER CHUTE XL1VG SC HG & SPLIT TG Right
$
8,460
BEEFMASTER CHUTE XL1VG SC HG & BI-FOLD TG Right
$
8,460
BEEFMASTER CHUTE XL1VG 30" HG Left
$
7,522
BEEFMASTER CHUTE XL1VG 30" HG & SPLIT TG Left
$
8,460
BEEFMASTER CHUTE XL1VG 30" HG & BI-FOLD TG Left
$
8,460
BEEFMASTER CHUTE XL1VG 30" HG Right
$
7,522
BEEFMASTER CHUTE XL1VG 30" HG & SPLIT TG Right
$
8,460
BEEFMASTER CHUTE XL1VG 30" HG & BI-FOLD TG Right
$
8,460
SEEDSTOCK 1100 30" HG & BIFOLD TG LEFT
$
19,500
SEEDSTOCK 1100 SC HG & BIFOLD TG LEFT
$
19,500
PRODUCER 640 30" HG & REAR CONTROLS
$
5,500
PRODUCER 640 SC HG
$
5,500
PRODUCER 640 30" HG & REAR CONTROLS W/BF TG
$
6,500
PRODUCER 640 SC HG W/BF TG
$
6,500
W-W L/H TRIMSTOCK CHUTE SC HG
$
4,037
W-W L/H TRIMSTOCK CHUTE 30" HG
$
4,037
W-W R/H TRIMSTOCK CHUTE SC HG
$
4,037
W-W R/H TRIMSTOCK CHUTE 30" HG
$
4,037
W-W LONGHORN CHUTE LEFT
$
6,010
W-W LONGHORN CHUTE RIGHT
$
6,010
W-W Load Chutes
W-W ADJ LOAD CHUTE (STATIONARY)
$
8,320
W-W ADJ LOAD CHUTE (PORTABLE)
$
9,772
W-W HD LOAD CHUTE
$
6,499
Headgates/Tailgates
BEEFMASTER SELF CATCH HEADGTE LEFT
$
2,207
BEEFMASTER SELF CATCH HEADGTE RIGHT
$
2,207
TRIMSTOCK HEADGATE L/H
$
1,438
TRIMSTOCK HEADGATE R/H
$
1,438
30" MANUAL HEADGATE
$
2,207
STANCHION HEADGATE
$
2,207
BEEFMASTER NECK BAR L/H
$
96
BEEFMASTER NECK BAR R/H
$
96
BEEFMASTER NOSE BAR
$
85
BEEFMASTER SPLIT TAILGATE LEFT
$
1,288
BEEFMASTER SPLIT TAILGATE RIGHT
$
1,288
BEEFMASTER BIFOLD TAILGATE LEFT
$
1,299
BEEFMASTER BIFOLD TAILGATE RIGHT
$
1,299
BEEFMASTER PULL UP TAILGATE
$
231
RUMP BAR
$
65
Chutes
Powder Coat Finish
Part # IDescription I Retail
Calf Tables
2332-100-000 W-W TECO CALF TABLE LEFT HAND BRAND $ 3,626
2332-200-000 W-W TECO CALF TABLE RIGHT HAND BRAND $ 3,626
Maternity Pen
2331-040-000
MATERNITY PEN 10X10 W/SC HEADGATE
$ 4,957
2331-050-000
MATERNITY PEN 10X10 W/STAN HEADGATE
$ 4,108
2331-060-000 MATERNITY PEN 10X10 W/30" HEADGATE $ 4,957
Palpation Cage
2364-001-000
BEEFMASTER PALP CAGE LEFT
$ 1,226
2364-002-000
BEEFMASTER PALP CAGE RIGHT
$ 1,226
2364-003-000
BEEFMASTER PALP CAGE REV. SWING
$ 1,226
2364-004-000
BEEFMASTER PALP CAGE ADJ.
$ 3,569
2364-005-000
BEEFMASTER PALP CAGE F/S
$ 1,443
Yoke Trailers
2342-100-100 BEEFMASTER YOKE TRAILER $ 2,293
2342-100-200
BEEFMASTER XL YOKE TRAILER
$ 2,328
2342-100-300 SEEDSTOCK YOKE TRAILER $ 2,553
Carriers
2343-000-100
W-W PANEL TRANSPORT
$ 4,190
2343-001-100
W-W PRO PANEL TRANSPORT
$ 14,899
6371-100-000
HD EZ-LIFT
$ 1,300
Chute Parts
0199-002-008 BEEFMASTER HEADGET CABLE (SET OF 2) $ 114
2211-050-105
BEEFMASTER 4 1/4" PULLY
$ 57
2211-050-110
BEEFMASTER REAR PULLY
$ 31
2211-050-130
BEEFMASTER LONG EAR PULLY
$ 51
2211-070-001
BEEFMASTER PUSH ROD ASSY
$ 30
2211-080-106
BEEFMASTER TENSION ROD
$ 26
2211-090-009
BEEFMASTER SQUEEZE DOG
$ 82
0199-000-111
BEEFMASTER EXTENSION SPRING (9 1/4")
$ 20
2211-090-250
BEEFMASTER GATE BOARD (STD & XL2VG)
$ 503
2211-290-300
BEEFMASTER GATE BOARD (XL)
$ 547
2216-003-009
30" HG FRICTION HANDLE
$ 47
2216-003-010
30" HG FRICTION ROD
$ 27
0199-000-113 30" HG FRICTION LATCH SPRING $ 20
Auction Ring
2374-000-000
W-W STD AUCTION RING
$ 9,421
Classic Panels & Gates
Powder Coat Finish
Part #
Description
Retail
3311-502-000
CLASSIC 502 PANEL
$
182
3311-503-000
CLASSIC 503 PANEL
$
213
3311-504-000
CLASSIC 504 PANEL
$
254
3311-506-000
CLASSIC 506 PANEL
$
296
3311-506-006
CLASSIC 506-6 PANEL
$
380
3311-508-000
CLASSIC 508 PANEL
$
348
3311-510-000
CLASSIC 510 PANEL
$
417
3311-512-000
CLASSIC 512 PANEL
$
476
3311-514-000
CLASSIC 514 PANEL
$
577
3311-516-000
CLASSIC 516 PANEL
$
647
Half Sheeted Panels
3311-504-100
CLASSIC 504 PANEL HALF SHEETED
$
371
3311-506-106
CLASSIC 506-6 PANEL HALF SHEETED
$
637
3311-508-100
CLASSIC 508 PANEL HALF SHEETED
$
510
3311-510-100
CLASSIC 510 PANEL HALF SHEETED
$
618
Full Sheeted Panels
3311-504-200
CLASSIC 504 PANEL FULL SHEETED
$
471
3311-506-206
CLASSIC 506-6 PANEL FULL SHEETED
$
894
3311-508-200
CLASSIC 508 PANEL FULL SHEETED
$
644
3311-510-200
CLASSIC 510 PANEL FULL SHEETED
$
784
Gate -in -Frame
3312-024-000
CLASSIC 24" GIF
$ 438
3312-036-000
CLASSIC 36" GIF
$ 456
3312-048-000
CLASSIC 48" GIF
$ 484
3312-060-000
CLASSIC 60" GIF
$ 563
3312-072-000
CLASSIC 72" GIF
$ 608
3312-084-000
CLASSIC 84" GIF
$ 703
Sheeted Gate -in -Frame
3312-060-100
60" GIF HALF SHEETED
$ 624
3312-060-200
(CLASSIC
CLASSIC 60" GIF FULL SHEETED
I $ 814
High Pole Gates
3314-508-078
CLASSIC 508 HIGH POLE GATE 7'8"
$ 876
3314-510-078
CLASSIC 510 HIGH POLE GATE 7'8"
$ 930
3314-512-078
CLASSIC 512 HIGH POLE GATE 7'8"
$ 1,037
3314-510-178
CLASSIC 510 HIGH POLE GATE 7'8" HALF SHEETED
$ 1,427
3314-510-278
CLASSIC 510 HIGH POLE GATE 7'8" FULL SHEETED W/HBL
$ 1,933
3314-508-096
CLASSIC 508 HIGH POLE GATE 9'6"
$ 991
3314-510-096
CLASSIC 510 HIGH POLE GATE 9'6"
$ 1,058
3314-512-096
CLASSIC 512 HIGH POLE GATE 9'6"
$ 1,175
Classic Panels & Gates
Powder Coat Finish
Part# (Description I Retail
Gate Panels (G4)
3315-508-000
CLASSIC 508 G4
$
737
3315-510-000
CLASSIC 510 G4
$
766
3315-512-000
CLASSIC 512 G4
$
846
3315-510-100
CLASSIC 510 G4 HALF SHEETED
$
1,236
3315-510-200
CLASSIC 510 G4 FULL SHEETED
$
1,546
Corral Gates
3316-506-000
CLASSIC 506 CORRAL GATE
$
385
3316-508-000
CLASSIC 508 CORRAL GATE
$
410
3316-510-000
CLASSIC 510 CORRAL GATE
$
476
3316-512-000
CLASSIC 512 CORRAL GATE
$
546
3316-514-000
CLASSIC 514 CORRAL GATE
$
641
3316-516-000
CLASSIC 516 CORRAL GATE
$
709
Alley Control
2350-400-000
PA ADJ ACF LEFT
$
530
2350-400-002
PA ADJ ACF RIGHT
$
530
3313-032-000
CLASSIC 32" ALLEY CONTROL FRAME
$
333
3313-038-000
CLASSIC 38 1/2" ALLEY CONTROL FRAME
$
333
3313-132-000
CLASSIC 32" ALLEY CONTROL GATE
$
562
3313-132-100
CLASSIC 32" ALLEY CONTROL GATE HALF SHEETED
$
640
3313-132-200
CLASSIC 32" ALLEY CONTROL GATE FULL SHEETED W/HBL
$
833
2350-403-000
W-W DBL ADJ ACF W/SLIDE POST
$
897
2350-401-000
PA CALF BLOCK
$
195
Connecting Post
3318-100-000
CLASSIC 1-WAY CONNECTING POST 6'
$
99
3318-200-000
CLASSIC 2-WAY 180 CONNECTING POST 6'
$
99
3318-290-000
CLASSIC 2-WAY 90 CONNECTING POST 6'
$
114
3318-300-000
CLASSIC 3-WAY CONNECTING POST 6'
$
117
3318-400-000
CLASSIC 4-WAY CONNECTING POST 6'
$
131
Spreader Post
3318-100-078
CLASSIC 1-WAY SPREADER POST 7'8"
$
130
3318-200-078
CLASSIC 2-WAY 180 SPREADER POST 7'8"
$
130
3318-300-078
CLASSIC 3-WAY SPREADER POST 7'8"
$
151
3318-100-096
CLASSIC 1-WAY SPREADER POST 9'6"
$
151
3318-200-096
CLASSIC 2-WAY 180 SPREADER POST 9'6"
$
151
3318-300-096
CLASSIC 3-WAY SPREADER POST 9'6"
$
179
Alley Spreader Bars
3331-100-108
CLASSIC S-8 SPREADER BAR TOP
$
90
3331-100-208
CLASSIC S-8 SPREADER BAR BOTTOM
$
114
3331-101-000
CLASSIC 5-10 SPREADER BAR TOP
$
111
3331-102-000
CLASSIC 5-10 SPREADER BAR BOTTOM
$
148
3331-201-000
CLASSIC 5-12 SPREADER BAR TOP
$
120
3331-202-000
CLASSIC 5-12 SPREADER BAR BOTTOM
$
165
Classic Panels & Gates
Powder Coat Finish
Part # IDescription I Retail
Panel Accessories
3319-100-000
CLASSIC PANEL MOUNTING BRACKET (CLIP)
$ 87
3319-101-000
CLASSIC PANEL MOUNTING BRACKET (PIN LEFT)
$ 99
3319-102-000
CLASSIC PANEL MOUNTING BRACKET (PIN RIGHT)
$ 99
3319-200-000
CLASSIC WALL MOUNTING BRACKET (PINS)
$ 48
3319-201-000
CLASSIC WALL MOUNTING BRACKET (CLIPS)
$ 23
3332-110-000
CLASSIC POST ANCHOR SLEEVE (A30)
$ 52
3332-120-000
CLASSIC POST ANCHOR PAD
$ 51
3332-130-000
CLASSIC POST PAD
$ 22
3332-130-001
CHAPARRAL POST PAD
$ 22
3332-135-000
POST PAD PIN
$ 5
3332-200-000
PANEL ALLEY STOP
$ 195
3332-210-000
CROWD ALLEY STOP
$ 203
3332-215-000
OVERHEAD ALLEY STOP
$ 295
3332-305-000
TERRAIN ADJUSTMENT BRACKET
$ 29
3332-310-300
TRIPLE SOCKET
$ 18
3332-315-000
32" TO 38 1/2" ADPT (SET OF 4)
$ 87
3332-320-000
CHUTE TO FRAME ADPTS (SET OF 2)
$ 172
0200-000-700
LARGE PLUNGER LATCH
$ 66
0200-000-750
STRIKER PLATE (WELD ON)
$ 20
3332-330-000
STRIKER PLATE (WOOD MOUNT)
$ 29
3332-325-000
HORSEBACK LATCH
$ 116
2380-004-000
LARGE PLUNGER LATCH REPAIR KIT
$ 52
2380-005-000
POST PIN & RETAINER CLIP SET
$ 22
2380-007-000
SMALL PLUNGER LATCH REPAIR KIT
$ 22
3332-326-000
SMALL HORSEBACK LATCH
$ 116
Chaparral Gates & Panels
Powder Coat Finish
Part #
Description
Retail
3341-000-000
CHAPARRAL STARTER POST
$
70
3341-602-400
CHAPARRAL 6x2'4" PANEL
$
174
3341-604-000
CHAPARRAL 6x4' PANEL
$
241
3341-606-000
CHAPARRAL 6x6' PANEL
$
306
3341-608-000
CHAPARRAL 6x8' PANEL
$
339
3341-610-000
CHAPARRAL 6x10' PANEL
$
348
3341-612-000
CHAPARRAL 6x12' PANEL
$
384
3341-614-000
CHAPARRAL 6x14' PANEL
$
449
3341-616-000
CHAPARRAL 6x16' PANEL
$
486
3341-602-400
CHAPARRAL 6x2'4" PANEL W/"J" LEG
$
191
3341-604-000
CHAPARRAL 6x4' PANEL W/"J" LEG
$
257
3341-606-000
CHAPARRAL 6x6' PANEL W/"J" LEG
$
322
3341-608-000
CHAPARRAL 6x8' PANEL W/"J" LEG
$
356
3341-610-000
CHAPARRAL 6x10' PANEL W/"J" LEG
$
367
3341-612-000
CHAPARRAL 6x12' PANEL W/"J" LEG
$
400
3341-614-000
CHAPARRAL 6x14' PANEL W/"J" LEG
$
465
3341-616-000
CHAPARRAL 6x16' PANEL W/"J" LEG
$
506
Gate -in -Frame
3342-036-000
CHAPARRAL 6x3' GATE IN FRAME
$
311
3342-048-000
CHAPARRAL 6x4' GATE IN FRAME
$
374
3342-060-000
CHAPARRAL 6x5' GATE IN FRAME
$
385
3342-072-000
CHAPARRAL 6x6' GATE IN FRAME
$
417
High Pole Gates
3344-608-078
CHAPARRAL 6x8' HIGH POLE GATE 7'8"
$
761
3344-610-078
CHAPARRAL 6x10' HIGH POLE GATE 7'8"
$
803
3344-612-078
CHAPARRAL 6x12' HIGH POLE GATE 7'8"
$
858
3344-608-096
CHAPARRAL 6x8' HIGH POLE GATE 9'6"
$
900
3344-610-096
CHAPARRAL 6x10' HIGH POLE GATE 9'6"
$
939
3344-612-096
CHAPARRAL 6x12' HIGH POLE GATE 9'6"
$
995
Gate Panels (G4)
3345-608-000
CHAPARRAL 6x8' G4
$
632
3345-610-000
CHAPARRAL 6x10' G4
$
660
3345-612-000
CHAPARRAL 6x12' G4
$
780
Chaparral Gates & Panels
Powder Coat Finish
Part # IDescription I Retail
Corral Gates
3346-506-000
CHAPARRL 6' CORRAL GATE
$ 234
3346-508-000
CHAPARRAL 8' CORRAL GATE
$ 296
3346-510-000
CHAPARRAL 10' CORRAL GATE
$ 328
3346-512-000
CHAPARRAL 12' CORRAL GATE
$ 368
3346-514-000
CHAPARRAL 14' CORRAL GATE
$ 426
3346-516-000
CHAPARRAL 16' CORRAL GATE
$ 480
Alley Control
3343-028-000 CHAPARRAL 28" ALLEY CONTROL FRAME $ 294
3343-128-000
CHAPARRAL 28" ALLEY CONTROL GATE
$ 433
Riata Panels & Gates
3381-510-000 RIATA PANEL 10' $ 273
3381-512-000
RIATA PANEL 12'
$ 299
3382-072-096
RIATA 72" GIF 9'6" W/HBL
$ 606
3386-410-000
RIATA 10' CORRAL GATE
$ 280
3386-412-000 RIATA 12' CORRAL GATE $ 306
Lariat Panels
3361-510-000
LARIAT PANEL 10'
$ 247
Equine
Powder Coat Finish
Part#
4321-110-000
(Description
Classic Horse Stalls
CLASSIC STALL FRONT 10'
I Retail
$
1,143
4321-210-000
CLASSIC STALL FRONT DUT./D 10'
$
1,348
4321-310-000
CLASSIC STALL FRONT FEED/D 10'
$
1,266
4321-410-000
CLASSIC STALL FRONT DUT/F/D 10'
$
1,430
4321-510-000
CLASSIC STALL FRONT SOF 10'
$
1,712
4321-610-000
CLASSIC STALL FRONT DUT/D&SOF 10'
$
1,817
4322-210-000
CLASSIC STALL DIVIDER VR 10'
$
728
4322-310-000
CLASSIC STALL DIVIDER SOLID 10'
$
568
4321-112-000
CLASSIC STALL FRONT 12'
$
1,255
4321-212-000
CLASSIC STALL FRONT DUT./D 12'
$
1,414
4321-312-000
CLASSIC STALL FRONT FEED/D 12'
$
1,348
4321-412-000
CLASSIC STALL FRONT DUT/F/D 12'
$
1,505
4321-512-000
CLASSIC STALL FRONT SOF 12'
$
1,819
4321-612-000
CLASSIC STALL FRONT DUT/D&SOF 12'
$
1,912
4322-212-000
CLASSIC STALL DIVIDER VR 12'
$
768
4322-312-000
CLASSIC STALL DIVIDER SOLID 12'
$
594
4320-001-000
CLASSIC STALL STARTER POST
Champion Horse Stalls
$
69
4331-210-000
CHAMPION STALL FRONT 10'
$
1,023
4332-210-000
CHAMPION STALL DIVIDER VR 10'
$
614
4332-310-000
CHAMPION STALL DIVIDER SOLID 10'
$
532
4331-212-000
CHAMPION STALL FRONT 12'
$
1,158
4332-212-000
CHAMPION STALL DIVIDER VR 12'
$
728
4332-312-000
CHAMPION STALL DIVIDER SOLID 12'
$
568
4330-001-000
CHAMPION STALL STARTER POST
$
69
4340-000-001
Accessories
TACK-N-GO SADDLE RACK RED
$
104
4340-000-100
TACK-N-GO SADDLE RACK BLACK
$
104
4341-000-000
W-W HORSE STOCKS
Truss Systems
$
2,882
4360-002-000
W-W TRUSS EXSTENSION 12"
$
68
4360-003-000
W-W TRUSS GIRT CLIP
$
27
4361-104-000
W-W STALL SHED ROW TRUSS 10'/4'
$
512
4361-124-000
W-W STALL SHED ROW TRUSS 12'/4'
$
580
4362-115-000
W-W TALL BARN TRUSS 10'/5' FEMALE
$
563
4362-126-000
W-W TALL BARN TRUSS 12'/6' FEMALE
$
673
4362-215-000
W-W TALL BARN TRUSS 10'/5' MALE
$
563
4362-226-000
W-W TALL BARN TRUSS 12'/6' MALE
$
673
4364-050-000
W-W TRUSS CENTER SUPPORT POST 50"
$
68
4364-054-000
W-W TRUSS CENTER SUPPORT POST 54"
$
68
4364-104-000
W-W TRUSS BBT 10'/4'
$
510
4364-124-000
W-W TRUSS BBT 12'/4'
$
589
Round Pens
Powder Coat Finish
Part #
Description
Retail
4394-050-000
DELUXE ROUND PEN 50' (LESS LUMBER)
$ 8,129
4394-050-200
DELUXE ROUND PEN 50' (SHEET METAL)
$ 11,943
4394-060-000
DELUXE ROUND PEN 60' (LESS LUMBER)
$ 9,493
4394-060-200
DELUXE ROUND PEN 60' (SHEET METAL)
$ 14,382
4395-050-000
RIATA ROUND PEN 50'
$ 4,701
4391-068-000
DELUXE ROUND PEN PANEL (LESS LUMBER)
$ 398
4391-068-200
DELUXE ROUND PEN PANEL (SHEET METAL)
$ 610
4392-068-000
DELUXE ROUND PEN GATE (LESS LUMBER)
$ 741
4392-068-200
DELUXE ROUND PEN GATE (SHEET METAL)
$ 969
3381-510-000
RIATA PANEL 10'
$ 273
3382-072-096
4894-050-000
RIATA 72" GIF 9'6" W/HBL
Pre -Galvanized Finish
DEL UXE ROUND PEN 50' (LESS L UMBER)
$ 606
$ 8,779
4894-050-200
DEL UXE ROUND PEN 50'(SHEET METAL)
$ 13,267
4894-060-000
DEL UXE ROUND PEN 60' (LESS L UMBER)
$ 10,547
4894-060-200
DEL UXE ROUND PEN 60' (SHEET METAL)
$ 15,976
4895-050-000
RIATA ROUND PEN50'
$ 5,105
4891-068-000
DEL UXE ROUND PEN PANEL (LESS L UMBER)
$ 442
4891-068-200
DEL UXE ROUND PEN PANEL (SHEET METAL)
$ 677
4892-068-000
DEL UXE ROUND PEN GATE (LESS L UMBER)
$ 823
4892-068-200
DEL UXE ROUND PEN GATE (SHEET METAL)
$ 1,0751
3881-510-000
RIATA PANEL 10'
$ 300
3882-072-096
RIATA 72" GIF9'6" W/HBL
$ 601
Timed Event Equipment
Powder Coat Finish
Part #
Description
Retail
5310-000-000
W-W ROPE CHUTE
$ 3,572
5310-000-025
W-W TEAM ROPING CHUTE
$ 2,817
5310-000-050
W-W MINI ROPE CHUTE
$ 2,568
5310-000-100
W-W ROPE CHUTE AUTO/AIR
$ 6,903
5310-000-400
W-W ROPE CHUTE AIR PKG (ADD ON)
$ 3,540
5310-100-000
W-W ROPE CHUTE EXT
$ 2,150
5310-105-000
W-W ROPE CHUTE E. W/PUSH GATE
$ 2,716
5310-000-051
W-W MINI ROPE CHUTE EXT
$ 1,073
5310-101-000
W-W TIMED EVEN STRIPPING CHUTE
$ 1,440
5310-107-000
W-W ROPE CHUTE LEAD UP
$ 1,609
5310-106-000
W-W ROPE CHUTE 90
$ 501
5310-108-000
W-W MINI ROPE CHUTE 90
$ 215
5310-000-700
W-W CHUTE DOGGIN CHUTE
$ 2,568
Horse Saver
5312-000-000 W-W HORSE SAVER W/20 X 50 ARENA Painted
5311-000-000
W-W HORSE SAVER
$ 2,291
5311-001-000 W-W HORSE SAVER WHEEL KIT $ 533
W-W Arrow Pens
5313-000-000
W-W ARROW PEN OUTSIDE LOAD
$ 15,612
5313-014-000 W-W ARROW PEN INSIDE LOAD (14 GATE) $ 14,000
W-W Complete Arenas
5321-100-000
CHAPARRAL ROPNG ARENA W/O RETUN
$ 33,516
5322-100-000 ICHAPARRAL ROPNG ARENA W/RETUN $ 42,330
W-W Arena Componets
3341-602-400
CHAPARRAL 6x2'4" PANEL
$ 174
3341-608-000
CHAPARRAL 6x8' PANEL
$ 339
3341-610-000
CHAPARRAL 6x10' PANEL
$ 348
3341-612-000
CHAPARRAL 6x12' PANEL
$ 384
3344-608-096
CHAPARRAL 6x8' HIGH POLE GATE 9'6"
$ 900
3344-610-096
CHAPARRAL 6x10' HIGH POLE GATE 9'6"
$ 939
3344-612-096
CHAPARRAL 6x12' HIGH POLE GATE 9'6"
$ 995
3332-305-000
TERRAIN ADJUSTMENT BRACKET
$ 29
3332-310-300
TRIPLE SOCKET
$ 18
5344-510-000
ROPE CHUTE BOX 510 G5 9' TALL
$ 1,158
5344-516-600
ROPE CHUTE BOX 516-6
$ 787
5344-605-000
ROPE CHUTE BOX 605
$ 449
5344-610-000
ROPE CHUTE BOX 10' PANEL
$ 754
5345-512-133
ROPE CHUTE BOX 133" OSM GATE
$ 369
5312-400-000
W-W HORSE SAVER STARTER POST
$ 79
5312-400-002
W-W HORSE SAVER PANEL 18"
$ 52
5312-403-000
W-W HORSE SAVER PANEL 3'4 1/2"
$ 139
5312-405-000
W-W HORSE SAVER PANEL 5'
$ 161
5312-407-000
W-W HORSE SAVER PANEL 7' S/8"
$ 224
5312-408-000
W-W HORSE SAVER PANEL 8' 6"
$ 247
5312-410-000
W-W HORSE SAVER PANEL 10'
$ 274
5312-410-005
W-W HORSE SAVER GATE PANEL 10'
$ 445
Rough Stock Equipment
Powder Coat Finish
Part #
Description
Retail
5331-100-000
W-W BUCKING CHUTE 1 SECTION LEFT
$
8,145
5331-200-000
W-W BUCKING CHUTE 1 SECTION RIGHT
$
8,145
5332-100-000
W-W BUCKING CHUTE 2-SECTION LEFT
$
13,857
5332-200-000
W-W BUCKING CHUTE 2-SECTION RIGHT
$
13,857
5333-100-000
W-W BUCKING CHUTE 3-SECTION LEFT
$
19,676
5333-200-000
W-W BUCKING CHUTE 3-SECTION RIGHT
$
19,676
5334-100-000
W-W BUCKING CHUTE 4-SECTION LEFT
$
25,494
5334-200-000
W-W BUCKING CHUTE 4-SECTION RIGHT
$
25,494
5331-100-300
W-W BUCKING CHUTE 1 SECTION W/FOLD UP CW LH
$
8,730
5331-200-300
W-W BUCKING CHUTE 1 SECTION W/FOLD UP CW RH
$
8,730
5332-100-300
W-W BUCKING CHUTE 2-SECTION W/FOLD UP CW LH
$
15,027
5332-200-300
W-W BUCKING CHUTE 2-SECTION W/FOLD UP CW RH
$
15,027
5333-100-300
W-W BUCKING CHUTE 3-SECTION W/FOLD UP CW LH
$
21,431
5333-200-300
W-W BUCKING CHUTE 3-SECTION W/FOLD UP CW RH
$
21,431
5334-100-300
W-W BUCKING CHUTE 4-SECTION W/FOLD UP CW LH
$
27,834
5334-200-300
W-W BUCKING CHUTE 4-SECTION W/FOLD UP CW RH
$
27,834
W-W Adjustable Bucking Chutes
5331-100-100
IW-W BUCKING CHUTE 1 SECTION ADJ. LEFT
I $
9,282
5331-200-100
W-W BUCKING CHUTE 1 SECTION ADJ. RIGHT
$
9,282
W-W Mutton Bustin Chutes
5335-100-000
MUTTON BUSTIN CHUTE SINGLE
$
2,282
5335-200-000
IW-W
W-W MUTTON BUSTIN CHUTE DOUBLE
I $
4,181
W-W Rough Stock Accessories
5330-400-100
W-W BUCKING CHUTE CATWALK STEPS
$
286
5330-400-150
W-W BUCKING CHUTE CATWALK STEPS HANDRAIL
$
195
5341-600-000
W-W 90 DEG CORNER 7' W/PLUMBER
$
2,937
5341-600-001
W-W 90 DEG EH CORNER 7' W/PLUMBER
$
2,937
5341-601-000
W-W 90 DEG CORNER 7' W/WOOD
$
1,738
5341-601-001
W-W 90 DEG EH CORNER 7' W/WOOD
$
1,738
5341-602-000
W-W 90 DEG CORNER 7' W/SHEET METAL
$
1,738
5341-602-001
W-W 90 DEG EH CORNER 7' W/SHEET METAL
$
1,738
5341-702-200
W-W SHOTGUN 90
$
2,920
5342-000-000
W-W 6' ELBOW ENTRY GATE
$
446
5342-000-005
W-W 5' ELBOW ENTRY GATE
$
438
5343-510-000
CLASSIC RIGGING PANEL 10'
$
826
W-W Rough Stock Arenas
IW-W FUTURITY ARENA
I $
48,597
W-W FUTURITY ARENA W/ADJ BUCKING CHUTES
$
50,872
Part #
Description
Feed Equipment
Retail
6811-000-000
W-W FEED BUNK
$
1,008
6840-001-000
HG HAY FEEDER
$
975
3817-508-000
CLASSIC 508 FEEDER PANEL
PRE GALV
$
482
3817-510-000
CLASSIC 510 FEEDER PANEL
PRE GALV
$
579
3817-512-000
CLASSIC 512 FEEDER PANEL
PRE GALV
$
655
3317-508-000
CLASSIC 508 FEEDER PANEL
$
426
3317-510-000
CLASSIC 510 FEEDER PANEL
$
512
3317-512-000
CLASSIC 512 FEEDER PANEL
$
580
W-W Paul Sclaes
Powder Coat Finish
Part #
Description
Retail
7311-002-000
W-W PAUL SCALE 58SX
$ 3,205
7311-005-000
W-W PAUL SCALE SMALL ANIMAL SCALE WHEEL KIT
$ 433
7311-010-000
W-W PAUL SCALE 70SX
$ 3,474
7311-010-100
W-W PAUL SCALE LFT 700LB
$ 8,260
7312-004-000
W-W PAUL SCALE 2400 LB PLATFORM (2405)
$ 4,835
7312-005-000
W-W PAUL SCALE 2400 LB W/SQZ SIDE (241S)
$ 7,166
7312-006-000
W-W PAUL SCALE 2400 LB PORTABLE W/SQZ PEN (2425)
$ 9,472
7313-001-000
W-W PAUL SCALE 3000 LB PLATFORM (3035)
$ 5,582
7313-002-000
W-W PAUL SCALE 3000 LB PLATFORM W/SQZ PEN (3045)
$ 8,207
7313-003-000
W-W PAUL SCALE 3000 LB PORTABLE W/SQZ PEN (3055)
$ 10,604
7313-004-000
W-W PAUL SCALE 4000 LB PLATFORM (3065)
$ 5,942
7313-005-000
W-W PAUL SCALE 4000 LB PLATFORM W/SQZ PEN (3075)
$ 8,776
7313-006-000
W-W PAUL SCALE 4000 LB PORTABLE W/SQZ PEN (3085)
$ 11,038
7313-006-100
W-W PAUL SCALE 3000 LB LFT W/HOLDING PEN
$ 13,489
7313-007-000
W-W PAUL SCALE 6000 LB PLATFORM (60S)
$ 11,440
7313-008-000
W-W PAUL SCALE 6000 LB PLATFORM W/SQZ PEN (6015)
$ 14,465
7313-009-000
W-W PAUL SCALE 6000 LB PORTABLE W/SQZ PEN (6025)
I $ 17,191
7314-008-000
W-W PAUL SCALE 10,000 LB W/HOLDING PEN
1 $ 21,737
Fair & Expo
Powder Coat Finish
Hog & Sheep
8311-204-000
HOG & SHEEP 4' PANEL 41" P-C
$
202
8311-205-000
HOG & SHEEP 5' PANEL 41" P-C
$
241
8311-206-000
HOG & SHEEP 6' PANEL 41" P-C
$
280
8311-208-000
HOG & SHEEP 8' PANEL 41" P-C
$
384
8311-210-000
HOG & SHEEP 10' PANEL 41" P-C
$
462
8311-212-000
HOG & SHEEP 12' PANEL 41" P-C
$
540
8314-104-000
HOG & SHEEP 4' GATE -IN -FRAME 41" P-P
$
319
8314-105-000
HOG & SHEEP 5' GATE -IN -FRAME 41" P-P
$
358
8314-106-000
HOG & SHEEP 6' GATE -IN -FRAME 41" P-P
$
397
8318-000-000
HOG & SHEEP STARTER POST 41"
$
59
8311-204-900
HOG & SHEEP 4' PANEL 48" P-C
$
228
8311-205-900
HOG & SHEEP 5' PANEL 48" P-C
$
267
8311-206-900
HOG & SHEEP 6' PANEL 48" P-C
$
306
8311-208-900
HOG & SHEEP 8' PANEL 48" P-C
$
410
8311-210-900
HOG & SHEEP 10' PANEL 48" P-C
$
488
8311-212-900
HOG & SHEEP 12' PANEL 48" P-C
$
566
8314-104-900
HOG & SHEEP 4' GATE -IN -FRAME 48" P-P
$
345
8314-105-900
HOG & SHEEP 5' GATE -IN -FRAME 48" P-P
$
384
8314-106-900
HOG & SHEEP 6' GATE -IN -FRAME 48" P-P
$
423
8318-000-000
HOG & SHEEP STARTER POST 48"
$
65
8319-002-000
HOG & SHEEP FEEDER ROD (PER FT.)
$
5
8319-003-000
HOG & SHEEP 6" BEDDING RAIL (PER FT.)
$
13
8329-100-000
H&S PIN -PIN ADPT.
$
23
8329-200-000
H&S CLIP -CLIP ADPT.
Tie Panels
$
27
8331-210-000
W-W TIE PANEL FRONT (HOUSTON)
$
554
8332-208-000
W-W TIE PANEL DIVIDER (HOUSTON)
$
277
8333-002-000
W-W TIE PANEL X BRACE
$
134
8333-100-000
W-W TIE PANEL A
Call
8333-200-000
W-W TIE PANEL B
Call
8333-610-000
W-W ARENA PANEL 10'
Call
8333-900-000
W-W TIE PANEL DIVIDER
Call
8330-048-000
W-W TIE PANEL 48" ACF
$
365
8333-000-200
W-W PANEL BASE
Call
Fair & Expo
Powder Coat Finish
Portable Stalls
4311-110-000 W-W PORTABLE STALL FRONT HR 10' Call
4311-210-000
W-W PORTABLE STALL FRONT VR 10'
Call
4312-110-000
W-W PORTABLE STALL DIVIDER HR 10'
Call
4312-210-000
W-W PORTABLE STALL DIVIDER VR 10'
Call
4312-310-000
W-W PORTABLE STALL DIVIDER SOLID 10'
Call
4311-112-000
W-W PORTABLE STALL FRONT HR 12'
Call
4311-212-000
W-W PORTABLE STALL FRONT VR 12'
Call
4312-112-000
W-W PORTABLE STALL DIVIDER HR 12'
Call
4312-212-000
W-W PORTABLE STALL DIVIDER VR 12'
Call
4312-312-000
W-W PORTABLE STALL DIVIDER SOLID 12'
Call
4311-001-000 W-W PORTABLE STALL STARTER POST Call
Wyoming Stalls
4351-110-400
WYOMING STALL FRONT HR 10'
Call
4351-210-400
WYOMING STALL FRONT VR 10'
Call
4352-110-400
WYOMING STALL DIVIDER HR 10'
Call
4352-210-400
WYOMING STALL DIVIDER VR 10'
Call
4352-310-400
WYOMING STALL DIVIDER SOLID 10'
Call
4351-112-400
WYOMING STALL FRONT HR 12'
Call
4351-212-400
WYOMING STALL FRONT VR 12'
Call
4352-112-400
WYOMING STALL DIVIDER HR 12'
Call
4352-212-400
WYOMING STALL DIVIDER VR 12'
Call
4352-312-400
WYOMING STALL DIVIDER SOLID 12'
Call
4350-001-000
IWYOMING STALL STARTER POST
Call
Hydraulic Chutes
Powder Coat Finish
9310-121-000
W-W HYDRAULIC CALF TABLE L/H BRAND
$ 7,293
9310-122-000
W-W HYDRAULIC CALF TABLE R/H BRAND
$ 7,293
9312-121-000
W-W HYDRAULIC RANCHMASTER LEFT
$ 20,280
9312-122-000
W-W HYDRAULIC RANCHMASTER RIGHT
$ 20,280
9314-121-000
W-W HYDRAULIC BULLMASTER LEFT
$ 27,257
9314-122-000
W-W HYDRAULIC BULLMASTER RIGHT
$ 27,257
9313-121-000
W-W HYDRAULIC SUPER PRO LEFT
$ 24,683
9313-122-000
W-W HYDRAULIC SUPER PRO RIGHT
$ 24,683
9330-001-000
W-W HYD TIP ASSEMBLY
$ 7,883
9330-002-000
W-W HYD 2-PIECE FALL OUT FLOOR
$ 1,199
9330-002-001
W-W HYD 3-PIECE FALL OUT FLOOR
$ 1,563
9330-003-000
W-W HYD HEAD REST
$ 338
9330-005-000
W-W HYD SEPARATE UNIT
$ 463
9330-006-000
W-W HYD HEAD BENDER
$ 1,784
9330-007-000
W-W HYD NECK BAR
$ 2,076
9330-008-000
W-W HYD LOOVER (EA)
$ 77
9330-009-000
W-W HYD PALP CAGE
$ 2,035
9330-010-000
W-W HYD SPLIT DROP DOOR
$ 902
9330-010-100
W-W HYD XL2VG BODY
$ 2,789
9330-010-100
W-W HYD 50/50 MILK DOOR
$ 465
9330-011-000
W-W HYD SINGLE FOLD DOWN BAR
$ 77
9330-012-000
W-W HYD ADJUSTABLE BOTTOM
$ 1,816
9330-013-000
W-W HYD SPLIT BOTTOM
$ 2,131
9330-016-000
W-W HYD GATE GUARD
$ 2,249
9330-017-000
W-W HYD DUAL CONTROLS
$ 1,578
9330-018-000
W-W HYD GAS UNIT
$ 7,506
9330-020-000
W-W HYD 3/4" HOT ROLL FLOOR
$ 920
9330-021-000
W-W HYD PALP DOOR
$ 676
9330-022-000
W-W HYD FULL DROP DOOR
$ 670
9330-023-000
W-W HYD LEG PULLER
$ 2,354
9330-024-000
W-W HYD NOSE BAR & PIN
$ 87
9330-028-000
W-W HYD ADJ. GATE FEET (HEADGATE)
$ 1,875
9330-029-000
W-W HYD ADJ. GATE FEET (TAILGATE)
$ 1,875
9330-030-000
W-W HYD TELESCOPING, ROTATING CONTROLS
$ 1,216
9330-031-000
W-W HYD HEADGATE FOR TAILGATE
$ 615
9330-036-000
W-W HYD CRASH GATE
$ 1,229
9330-037-000
W-W HYD BRISKET BAR
$ 1,229
9330-038-000
W-W HYD PAISED PALP WINDOW
$ 582
9330-039-000
W-W HYD 30 AMP DISCONNECT W/30' CORD
$ 358
9330-041-000
W-W HYD BIFOLD HEADGATE
$ 2,569
9330-042-000
W-W HYD EXPRESS TRANSPORT SYSTEM
$ 5,142
9330-043-000
W-W HYD BIFOLD TAILGATE
$ 2,569
9330-045-000
W-W HYD RATCHETT STYLE BUTT BAR
$ 501
9330-050-000
W-W HYD POWER UNIT (3HP)
$ 3,220
9341-000-000
W-W HYD YOKE TRAILER
$ 4,492
9310-200-000
W-W HYD 6' CALF LEAD UP
I $ 845
Thomas, Ok - Duncan, OK - Livingston, TN
Pre -Galvanized Retail Price List
Effective 7/3/23
Systems
•
Part # Description Retail
1811-310-000
300-5-10 W/2-SEC. CA
$ 25,065
1812-310-000
300-S-10 W/3-SEC. CA
$ 22,426
1813-310-000
300-S-10 39 FT. WORKING ALLEY
$ 12,108
1814-310-000
300-10' COMPLETE
$ 26,317
1815-312-000
300-12' COMPLETE
$ 26,765
1816-100-000
W-WEZBOX w/SGL ALLEY
$ 11,307
1816-100-100
W-WEZBOX w/SGL ALLEYH/S
$ 13,555
1816-100-200
W-WEZBOX w/SGL ALLEYF/S
$ 15,278
1816-200-000
W-WEZBOX w/DBL ALLEY
Pre Galvanized
1816-200-100
W-WEZBOX w/DBL ALLEYH/S
Pre Galvanized
1816-200-200
W-WEZBOX w/DBL ALLEYF/S
Pre Galvanized
1821-270-000
270 SWEEP SYSTEM
$ 13,282
1821-270-100
270 SWEEP SYSTEM W/H/S TUB & ALLEY
$ 15,477
1821-270-200
270 SWEEP SYSTEM W/F/S TUB & HS/ALLEY
$ 16,454
1821-271-000
270 SWEEP SYSTEM W/EG
$ 13,773
1821-271-100
270 SWEEP SYSTEM W/H/S TUB, ALLEY & EG
$ 16,048
1821-271-200
270 SWEEP SYSTEM W/F/S TUB & HIS ALLEY& EG
$ 17,087
1821-210-000
210 SWEEPSYSTEM
$ 12,355
1821-210-100
210 SWEEP SYSTEM W/H/S TUB & ALLEY
$ 13,226
1821-210-200
210 SWEEP SYSTEM W/F/S TUB & HS/ALLEY
$ 14,302
1821-211-000
210 SWEEP SYSTEM W/EG
$ 12,845
1821-211-100
210 SWEEP SYSTEM W/H/S TUB, ALLEY & EG
$ 14,829
1821-211-200
210 SWEEP SYSTEM W/F/S TUB & H/SALLEY& EG
$ 15,594
1837-210-000
210 MODIFIED SYSTEM
$ 6,561
1837-210-100
210 MODIFIED SYSTEMH/S TUB & ALLEY
$ 8,126
1837-210-200
210 MODIFIED SYSTEM F/S TUB & HISALLEY
$ 9,016
1837-211-000
210 MODIFIED SYSTEM W/EG
$ 7,052
1837-211-100
210 MODIFIED SYSTEMHIS TUB, ALLEY & EG
$ 8,672
1837-211-200
210 MODIFIED SYSTEMF/S TUB & H/SALLEY& EG
$ 9,221
1818-090-000
90 MOD. SWEEP
$ 6,147
1818-090-100
90 MOD. SWEEP HIS
$ 7,534
1818-090-200
90 MOD. SWEEP F/S
$ 8,084
1818-091-000
90 MOD. SWEEP wAOADOUT
$ 6,777
I818-091-100
90 MOD. SWEEP w/LOAD0UT HIS
$ 7,910
1818-091-200
190 MOD. SWEEP wAOAD0UT F/S
$ 8,444
Systems
Pre-GalWhizedFinish
Part # Description Retail
1823-270-000 270 SWEEP TUB ONL Y $ 4,261
1823-270-100
270 SWEEP TUB ONL YHIS
$ 5,291
1823-270-200
270 SWEEP TUB ONL YF/S
$ 6,095
1823-210-000
210 SWEEP TUB ONL Y
$ 3,357
1823-210-100
210 SWEEP TUB ONL YHIS
$ 4,125
1823-210-200
210 SWEEP TUB ONL YF/S
$ 4,661
1826-000-000
SYSTEM V-TRAP
$ 1,394
1826-000-100
SYSTEM V-TRAP HIS
$ 1,634
1826-000-200
SYSTEM V-TRAP F/S
$ 1,845
1826-001-000
SYSTEMELIM- GATE V-TRAP
$ 1,868
1826-001-100
SYSTEMELIM. GATE V-TRAP H/S
$ 2,167
1826-001-200
SYSTEMELIM- GATE V-TRAPF/S
$ 2,378
1800-001-001
S YS TEM S WEEP GA TE L A TCH
$ 229
1800-001-000
SYSTEMSWEEP GATE
$ 744
1800-001-100
S YS TEM S WEEP GA TE HIS
$ 984
1800-001-200
SYSTEMSWEEP GATE H/S RH
$ 984
1800-002-000
SYSTEMSWEEPTUBADPT. TOP
$ 140
1800-003-000
SYSTEMSWEEPTUB ADPT- BOTTOM
$ 140
1800-004-000
S YS TEM EL IMINA TOR GATE
$ 867
1800-004-100
SYSTEM ELIMINATOR GATE HIS
$ 1,099
1800-004-200
SYSTEMELIMINATOR GATE HISRH
$ 1,099
1800-010-000
SYSTEMSWEEP SPREADER BOTTOM
$ 150
1800-011-000
SYSTEM SWEEP SPREADER TOP
$ 107
1800-100-000
SYSTEM SWEEP FRAME P-P
$ 627
1800-100-100
SYSTEM SWEEP FRAME P-P HIS
$ 881
1800-100-200
SYSTEMSWEEP FRAME P-P F/S
$ 1,143
1800-200-000
SYSTEM SWEEP FRAME P-C
$ 627
1800-200-100
SYSTEMSWEEPFRAMEP-CH/S
$ 881
1800-200-200
SYSTEM SWEEP FRAME P-C F/S
$ 1,143
1800-300-001
SYSTEMSWEEPFRAME/LOADOUTC-C
$ 1,360
I800-300-101
SYSTEMSWEEPFRAME/LOADOUTC-CH/S
$ 1,616
1800-300-201
SYSTEMSWEEPFRAME/LOADOUT C-CF/S
$ 1,876
Alleys
• , Finish
Part # Description Retail
2851-200-000 W-W CROWD ALLEYS -SEC. CURVED 2-A/S $ 8,488
2852-200-000
W-W CROWD ALLEY 2-SEC. CURVED 1 A/S
$ 5,914
2853-000-000
W-W CROWD ALLEY3-SEC. STRAIGHT 2A/S
$ 8,109
2854-200-000
W- W CROWD ALLEY2-SEC. STRAIGHTI A/S
$ 5,662
2857-200-000
W-W20' DBL ALLEY
$ 7,459
2857-200-100
W-W20'DBL ALLEYH/S
$ 8,671
2856-000-000
W- W 16' STRAIGHT PANEL ALLEY
$ 3,354
2856-000-100
W-W 16' STRAIGHT PANEL ALLEYHALFSHEETED
$ 4,189
2856-200-100 W-W20' 'S"PANEL ALLEYHALFSHEETED $ 5,395
Alley Componets
2833-500-000
CALFALLEYPANEL SHORTS'
$ 277
2833-700-000
CLAFALLEYPANEL LONG 7'
$ 316
2850-107-000
W-WCROWD ALLEYSHORTPANEL 7'
$ 750
2850-108-000
W- W CROWD ALLEYLONG PANEL 8'
$ 811
2850-108-100
W-WCROWDALLEYSTRAIGHTPANEL 8'
$ 811
2850-200-001
CA INTERIOR CALFBLOCK
$ 31
2850-200-002
CA LF/RR CALFBLOCK
$ 199
2850-200-003
CA KNUCKLE SOCKET TOP
$ 31
2850-200-004
CA KNUCKLE SOCKET BOTTOM
$ 31
2850-201-002
CA RF/LR CALFBLOCK
$ 199
2850-203-000
CA INTERIOR FRAME
$ 597
2850-204-000
CA LF/RR END FRAME
$ 597
2850-205-000
CA REAR END FRAME
$ 597
2850-400-000
PA ADJACFLEFT
$ 597
2850-400-002
PA ADJACFRIGHT
$ 597
2850-401-000
PA CALFBLOCK
$ 199
2861-000-000
CLASSIC 32"ROLLINGBLOCKDOOR
$ 1,353
2861-102-000
CLASSIC 32" TRACKLESS RBD
$ 1,691
2863-000-000
CLASSIC 381/2"ROLLING BLOCKDOOR
$ 1,470
2863-100-000
CLASSIC 381/2"ROLLING BLOCKDOOR P-P
$ 1,543
2863-101-000
CLASSIC 381/2"ADJRDB P-P
$ 2,665
3811-504-000
CLASSIC 504 PANEL
$ 285
3811-504-100
CLA SSIC 504 PA NEL HA I F SHEETED
$ 417
3811-504-200
CLASSIC 504 PANEL FULL SHEETED
$ 529
3811-508-000
CLASSIC508 PANEL
$ 393
3811-508-100
CLASSIC 508 PANEL HALFSHEETED
$ 573
3811-508-200
CLASSIC508 PANEL FULL SHEETED
$ 724
3811-510-500
CLASSIC 510 RAD. PANEL LEFT HALFSHEETED
$ 875
3811-510-501
CLA55IC510 RAD. PANEL IGHT HALFSHEETED
$ 875
3832-200-000
CLASSIC PANEL ALLEY STOP
$ 220
3832-210-000
CLASSIC CROWD ALLEY STOP
$ 229
3832-215-000
CLASSIC OVERHEAD ALLEYSTOP
$ 332
Chutes
•
Part # Description Retail
2311-111-008
BEEFMASTER CHUTE STD. SC HG Left
$ 7,333
2311-111-108
BEEFMASTER CHUTE STD. SC HG & SPLIT TG Left
$ 8,268
2311-111-208
BEEFMASTER CHUTE STD. SC HG & BI-FOLD TG Left
$ 8,268
2311-112-008
BEEFMASTER CHUTESTD. SCHG Ri ht
$ 7,333
2311-112-108
BEEFMASTER CHUTE STD. SC HG & SPLIT TG Right
$ 8,268
2311-112-208
BEEFMASTER CHUTE STD. SC HG & BI-FOLD TG Ri ht
$ 8,268
2311-131-008
BEEFMASTER CHUTE STD. 30"HG Left
$ 7,333
2311-131-108
BEEFMASTER CHUTE STD. 30"HG & SPLIT TG Left
$ 8,268
2311-131-208
BEEFMASTER CHUTE STD. 30"HG & BI-FOLD TG Left
$ 8,268
2311-132-008
BEEFMASTER CHUTE STD. 30"HG Ri ht
$ 7,333
2311-132-108
BEEFMASTER CHUTE STD. 30"HG & SPLIT TG Right
$ 8,268
2311-132-208
BEEFMASTER CHUTE STD. 30"HG & BI-FOLD TG Right
$ 8,268
2311-211-008
BEEFMASTER CHUTE XL SC HG Left
$ 8,704
2311-211-108
BEEFMASTER CHUTE XL SC HG & SPLIT TG Left
$ 9,638
2311-211-208
BEEFMASTER CHUTE XL SC HG & BI-FOLD TG Left
$ 9,638
2311-212-008
BEEFMASTER CHUTE XL SC HG Ri ht
$ 8,704
2311-212-108
BEEFMASTER CHUTE XL SC HG & SPLIT TG Right
$ 9,638
2311-212-208
BEEFMASTER CHUTEXL SCHG & BI-FOLD TG Ri ht
$ 9,638
2311-231-008
BEEFMASTER CHUTE XL 30"HG Left
$ 8,704
2311-231-108
BEEFMASTER CHUTEXL 30"HG & SPLIT TG Left
$ 9,638
2311-231-208
BEEFMASTER CHUTEXL 30"HG & BI-FOLD TG Left
$ 9,638
2311-232-008
BEEFMASTER CHUTE XL 30"HG Ri ht
$ 8,704
2311-232-108
BEEFMASTER CHUTE XL 30"HG & SPLIT TG Right
$ 9,638
2311-232-208
BEEFMASTER CHUTE XL 30"HG & BI-FOLD TG Ri ht
$ 9,638
2311-311-008
BEEFMASTER CHUTEXL2VG SCHG Left
$ 8,424
2311-311-108
BEEFMASTER CHUTE XL2VG SC HG & SPLIT TG Left
$ 9,363
2311-311-208
BEEFMASTER CHUTEXL2VG SC HG & BI-FOLD TG Left
$ 9,363
2311-312-008
BEEFMASTER CHUTEXL2VG SCHG Right
$ 8,424
2311-312-108
BEEFMASTER CHUTEXL2VG SC HG & SPLIT TG Right
$ 9,363
2311-312-208
BEEFMASTER CHUTE XL2VG SC HG & BI-FOLD TG Ri ht
$ 9,363
2311-331-008
BEEFMASTER CHUTEXL2VG 30"HG Left
$ 8,424
2311-331-108
BEEFMASTER CHUTE XL2VG 30"HG & SPLIT TG Left
$ 9,363
2311-331-208
BEEFMASTER CHUTE XL2VG 30"HG & BI-FOLD TG Left
$ 9,363
2311-332-008
BEEFMASTER CHUTE XL2VG 30"HG Ri ht
$ 8,424
2311-332-108
BEEFMASTER CHUTEXL2VG 30"HG & SPLIT TG Right
$ 9,363
2311-332-208
BEEFMASTER CHUTE XL2VG 30"HG & BI-FOLD TG Right
$ 9,363
Chutes
•
Part # Description Retail
2311-411-008
BEEFMASTER CHUTE XLI VG SCHG Left
$ 8,424
2311-411-108
BEEFMASTER CHUTE XLI VG SCHG & SPLIT TG Left
$ 9,363
2311-411-208
BEEFMASTER CHUTE XLI VG SCHG & BI-FOLD TG Left
$ 9,363
2311-412-008
BEEFMASTER CHUTE XLI VG SCHG Ri ht
$ 8,424
2311-412-108
BEEFMASTER CHUTE XLI VG SCHG & SPLIT TG Right
$ 9,363
2311-412-208
BEEFMASTER CHUTE XLI VG SCHG & BI-FOLD TG Ri ht
$ 9,363
2311-431-008
BEEFMASTER CHUTEXLI VG 30"HG Left
$ 8,424
2311-431-108
BEEFMASTER CHUTE XLI VG 30"HG & SPLIT TG Left
$ 9,363
2311-431-208
BEEFMASTER CHUTE XLI VG 30"HG & BI-FOLD TG Left
$ 9,363
2311-432-008
BEEFMASTER CHUTE XLI VG 30"HG Ri ht
$ 8,424
2311-432-108
IBEEFMASTER CHUTEXLI VG 30"HG & SPLIT TG Right
$ 9,363
2311-432-208 BEEFMASTER CHUTE XLI VG 30"HG & BI-FOLD TG Right $ 9,363
Palpation Cage
2864-001-000
BEEFMASTER PALP CAGE LEFT
$ 1,359
2864-002-000
BEEFMASTER PAL CAGE RIGHT
$ 1,359
2864-003-000
BEEFMASTER PA LP CAGE REV. SWING
$ 1,359
2864-005-000
BEEFMASTER PALP CAGE F/S
$ 1,6021
Classic Panels & Gates
• , Finish
Part # Description Retail
3811-502-000
CLASSIC502 PANEL
$ 205
3811-503-000
CLASSIC503 PANEL
$ 242
3811-504-000
CLASSIC504 PANEL
$ 282
3811-506-000
CLASSIC506 PANEL
$ 329
3811-506-006
CLASSIC506-6PANEL
$ 428
3811-508-000
CLASSIC508 PANEL
$ 389
3811-510-000
CLASSIC510 PANEL
$ 460
3811-512-000
CLASSIC512 PANEL
$ 532
3811-514-000
CLASSIC 514 PANEL
$ 641
3811-516-000 CLASSIC516PANEL $ 718
Half Sheeted Panels
3811-504-100
CLASSIC504 PANEL HALFSHEETED
$ 430
3811-506-106
CLASSIC506-6PANEL HALFSHEETED
$ 681
3811-508-100
CLASSIC508 PANEL HALFSHEETED
$ 566
3811-510-100 CLASSIC 510 PANEL HALFSHEETED $ 686
Full Sheeted Panels
3811-504-200
CLASSIC 504 PANEL FULL SHEETED
$ 579
3811-506-206
CLASSIC 506-6 PANEL FULL SHEETED
$ 935
3811-508-200
CLASSIC508 PANEL FULL SHEETED
$ 715
3811-510-200 CLASSIC 510 PANEL FULL SHEETED $ 870
Gate -in -Frame
3812-024-000
CLASSIC24"GIF
$ 488
3812-036-000
CLASSIC 36" GIF
$ 512
3812-048-000
CLASSIC 48" GIF
$ 541
3812-060-000
CLASSIC 60" GIF
$ 631
3812-072-000
CLASSIC 72 " GIF
Is 680
3812-084-000 CLASSIC 84" GIF $ 787
Sheeted Gate -in -Frame
3812-060-100
CLASSIC 60" GIF HALF SHEETED
Is 698
3812-060-200 CLASSIC 60" GIF FULL SHEETED $ 909
High Pole Gates
3814-508-078
CLASSIC508 HIGH POLE GATE7'8"
$ 972
3814-510-078
CLASSIC 510 HIGH POLE GATE 78"
$ 1,031
3814-510-178
CLASSIC510 HIGHPOLE GATE7'8"HALFSHEETED
$ 1,167
3814-510-278
CLASSIC510 HIGHPOLE GATE 78"FULL SHEETED
$ 1,606
3814-512-078
CLASSIC512 HIGH POLE GATE 78"
$ 1,148
3814-508-096
CLASSIC 508 HIGH POLE GATE 9'6"
$ 1,097
3814-510-096
CLASSIC 510 HIGH POLE GATE 96"
$ 1,173
3814-512-096
CLASSIC512HIGH POLE GATE9'6"
$ 1,303
t art 4t I ijescrzptzon xetav
Gate Panels (G4)
3815-508-000
CLASSIC 508 G4
$ 816
3815-510-000
CLASSIC510 G4
$ 848
3815-512-000
CLASSIC 512 G4
$ 941
3815-510-100
CLASSIC510 G4 HALF SHEETED
$ 1,236
3815-510-200
CLASSIC510 G4 FULL SHEETED
$ 1,628
Corral Gates
3816-506-000 CLASSIC506 CORRAL GATE $ 434
3816-508-000
CLASSIC508 CORRAL GATE
$ 454
3816-510-000
CIA SSIC510 CORRAL GATE
$ 527
3816-512-000
CLASSIC512 CORRAL GATE
$ 606
3816-514-000
CLASSIC514 CORRAL GATE
$ 711
3816-516-000
CLASSIC516 CORRAL GATE
$ 783
Alley Control
2850-400-000 PA ADJACFLEFT $ 589
2850-400-002
PA ADIACFRIGHT
$ 589
3813-032-000
CLASSIC 32"ALLEY CONTROL FRAME
$ 371
3813-038-000
CLASSIC 38112"ALLEY CONTROL FRAME
$ 371
3813-132-000
CLASSIC 32"ALLEY CONTROL GATE
$ 624
3813-132-100
CLASSIC 32 "ALLEY CONTROL GATEHALFSHEETED
$ 720
3813-132-200
CIA SSIC32"ALLEY CONTROL GATE FULL SHEETED W/HBL
$ 937
2850-403-000
W-WDBL ADJACF W/SLIDE POST
$ 1,005
2850-401-000 PA CALFBLOCK $ 215
Connecting Post
3818-100-000
CLASSIC I -WAY CONNECTING POST 6'
$ 113
3818-200-000
CLASSIC2- WA Y I80 CONNECTING POST 6'
$ 113
3818-290-000
CLASSIC 2- WA Y 90 CONNECTING POST 6'
$ 126
3818-300-000
CLASSIC 3- WA Y CONNECTING POST 6'
$ 129
3818-400-000
CLASSIC 4-WAY CONNECTING POST 6'
$ 147
Spreader Post
3818-100-078 CLASSIC 1-WAYSPREADER POST7'8' $ 146
3818-200-078
CLASSIC 2-WAY 180 SPREADER POST 78"
$ 146
3818-300-078
CLASSIC 3- WA Y SPREADER POST7'8"
$ 165
3818-100-096
CLASSIC I-WAYSPREADER POST 96'
$ 169
3818-200-096
1CLASSIC WA Y I80 SPREADER POST 9'6"
$ 169
3818-300-096
CLASSIC 3-WAYSPREADER POST 9'6"
$ 202
Alley Spreader Bars
3831-100-108 CLASSIC S-8 SPREADER BAR TOP $ 101
3831-100-208
CLASSIC S-8 SPREADER BAR BOTTOM
$ 129
3831-101-000
CLASSIC 5-10 SPREADER BAR TOP
$ 125
3831-102-000
CLASSIC 5-10 SPREADER BAR BOTTOM
$ 163
3831-201-000
CLASSIC 5-12 SPREADER BAR TOP
$ 130
3831-202-000
CLASSIC 5-12 SPREADER BAR BOTTOM
1 $ 1821
Classic Panels & Gates
Part # I Description I Retail
Panel Accessories
3819-100-000
CLASSIC PANEL MOUNTING BRACKET (CLIP)
$ 96
3819-101-000
CLASSICPANELMOUNTING BRACKET(PINLEFT)
$ 113
3819-102-000
CLASSICPANEL MOUNTING BRACKET (PINRIGHT)
$ 113
3819-200-000
CLASSIC WALL MOUNTING BRACKET (PINS)
$ 52
3819-201-000
CLASSIC WALL MOUNTING BRACKET (CLIPS)
$ 29
3832-130-000
CLASSIC POST PAD
$ 26
3832-130-001
CHAPARRAL POST PAD
$ 26
3832-200-000
PANEL ALLEY STOP
$ 217
3832-215-000
OVERHEAD ALLEYSTOP
$ 328
3832-320-000
CHUTE TO FRAME ADPTS (SET OF2)
$ 191
3832-310-300
TRIPLE SOCKET
$ 18
3332-325-000
HORSEBACKLATCH
$ 129
3832-326-000
SMALL HORSEBACK LATCH
$ 129
Chaparral Gates & Panels
•
Part # Description Retail
3841-000-000
CHAPARRAL STARTER POST
$ 91
3841-602-400
CHAPARRAL 6x24"PANEL
$ 194
3841-604-000
CHAPARRAL 6x4' PANEL
$ 272
3841-606-000
CHAPARRAL 6x6' PANEL
$ 338
3841-608-000
CHAPARRAL 6x8' PANEL
$ 374
3841-610-000
CHAPARRAL 6x10' PANEL
$ 387
3841-612-000
CHAPARRAL 6x12' PANEL
$ 426
3841-614-000
CHAPARRAL 6x14' PANEL
$ 498
3841-616-000
CHAPARRAL 6x16' PANEL
$ 538
3841-602-400
CHAPARRAL 6x24"PANEL W/'j"LEG
$ 211
3841-604-000
CHAPARRAL 6x4' PANEL W/'j" LEG
$ 289
3841-606-000
CHAPARRAL 6x6' PANEL W/'j" LEG
$ 359
3841-608-000
CHAPARRAL 6x8' PANEL W/'j" LEG
$ 395
3841-610-000
CHAPARRAL 6x10' PANEL W/'j" LEG
$ 408
3841-612-000
CHAPARRAL 6x12'PANEL W/'j"LEG
$ 446
3841-614-000
CHAPARRAL 6x14' PANEL W/'j" LEG
$ 519
3841-616-000
CHAPARRAL 6x16' PANEL W/'j" LEG
$ 558
Gate -in -Frame
3842-036-000 CHAPARRAL 6x3' GATEINFRAME $ 351
3842-048-000
CHAPARRAL 6x4' GATEINFRAME
$ 413
3842-060-000
CHAPARRAL 6x5'GATEINFRAME
$ 428
3842-072-000
CHAPARRAL 6x6'GATEINFRAME
$ 462
High Pole Gates
3844-608-078 CHAPARRAL 6x8'HIGHPOLE GATE7'8" $ 845
3844-610-078
CHAPARRAL 6x10'HIGHPOLE GATE7'8"
$ 891
3844-612-078
CHAPARRAL 6x12' HIGH POLE GATE 78"
$ 952
3844-608-096
CHAPARRAL 6x8'HIGHPOLEGATE 9'6"
$ 998
3844-610-096
ICHAPARRAL 6x10' HIGH POLE GATE 9'6"
$ 1,040
3844-612-096
ICHAPARRAL 6x12' HIGH POLE GATE 9'6"
$ 1,104
Gate Panels (G4)
3845-608-000 CHAPARRAL 6x8' G4 $ 701
3845-610-000
CHAPARRAL 6x10' G4
$ 733
3845-612-000 CHAPARRAL 6x12' G4 $ 866
Corral Gates
3846-506-000
CHAPARRAL 6' CORRAL GATE
$ 351
3846-508-000
CHAPARRAL 8' CORRAL GATE
$ 329
3846-510-000
CHAPARRAL 10' CORRAL GATE
$ 363
3846-512-000
CHAPARRAL 12' CORRAL GATE
$ 411
3846-514-000
CHAPARRAL 14' CORRAL GATE
is 564
3846-516-000 CHAPARRAL 16' CORRAL GATE $ 572
Alley Control
3843-028-000
CHAPARRAL 28"ALLEY CONTROL FRAME
Is 290
3843-128-000
CHAPARRAL 28"ALLEY CONTROL GATE
1 $ 481
Gates & Panels
fart # 1Jescrzptlon Ketall
Riata Panels & Gates
3881-510-000
RIATA PANEL 10'
$ 300
3881-512-000
RIATA PANEL 12'
$ 330
3882-072-096
RIATA 72" GIF9'6" W/HBL
$ 601
3886-410-000
RIATA 10' CORRAL GATE
$ 308
3886-412-000
RIATA 12' CORRAL GATE
$ 338
Wrangler Panels
3891-506-000 WRANGLER 6' PANEL $ -
3891-508-000
WRANGLER 8' PANEL
$ -
3891-510-000
WRANGLER 10' PANEL
$ -
3891-512-000
WRANGLER 12' PANEL
$ -
Wrangler Gate -In -Frames
3892-048-000 WRANGLER 4'GATEINFRAME $ -
3892-060-000
WRANGLER 5' GATEINFRAME
$ -
3892-072-000
WRANGLER 6'GATEINFRAME
$ -
3894-508-078
WRANGLER 8'GA TE IN FRAME
$ -
3894-510-078
WRANGLER 10' GATEINFRAME
$ -
3894-512-078
WRANGLER 12'GA TE IN FRAME
$ -
Wrangler Gate Panel
3895-508-000 WRANGLER 8' G5 $ -
3895-510-000
WRANGLER 10' G5
$ -
3895-512-000
WRANGLER 12' G5
$ -
W14isI11.11a
TIPS VENDOR AGREEMENT
TIPS RFP 230501 Agricultural and Animal Equipment, Supplies, and Services
The following Vendor Agreement ("Agreement") creates a legal agreement between The Interlocal Purchasing System ("TIPS"), a
government purchasing cooperative and Department of Texas Region 8 Education Service Center and (INSERT ENTITY NAME):
W-W Manufacturing
(ENTER ENTITY NAME]
its owners, agents, subsidiaries, and affiliates (together, "Vendor") (individually, "Party", and collectively the "Parties") and this
agreement shall exclusively govern the contractual relationship ("Agreement") between the Parties.
TIPS, a governmental entity and a national purchasing cooperative seeks to provide a valuable and necessary solution to public entities
and qualifying non -profits by performing the public procurement solicitation process and awarding compliant contracts to qualified
vendors. Then, where the law of a customer's jurisdiction allows, instead of public entities and qualifying non -profits expending time,
money, and resources on the extensive public procurement process, the use of TIPS allows public entities to quickly select and purchase
their preferred products or services from qualified, competitively evaluated vendors through cooperative purchasing.
1. Purpose. The purpose of this Agreement is to identify the terms and conditions of the relationship between TIPS and Vendor. Public
entities and qualifying non -profits that properly join or utilize TIPS ("TIPS Members") may elect to "piggyback" off of TIPS'
procurements and agreements where the laws of their jurisdiction allow. TIPS Members are not contractual parties to this Agreement
although terms and conditions of this Agreement may ensure benefits to TIPS Members.
2. Authority. The Parties agree that the signatories below are individual authorized to enter into this Agreement on behalf of their entity
and that they are acting under due and proper authority under applicable law.
3. Definitions.
a. TIPS Pricing: The specific pricing, discounts, and other pricing terms and incentives which Vendor submitted and
TIPS approved for each respective TIPS Contract awarded to Vendor and all permissible, subsequent pricing updates
submitted by Vendor and accepted by TIPS, if any.
b. Authorized Reseller: A reseller or dealer authorized and added by a Vendor through their online TIPS Vendor Portal
to make TIPS sales according to the terms and conditions herein.
4. Entire Agreement. This Agreement resulted from TIPS posting a "TIPS Solicitation" (RFP, RCSP, RFQ, or other) and Vendor
submitting a proposal in response to that posted TIPS Solicitation for evaluation and award. The Parties agree that this Agreement
consists of the provisions set forth herein and: (1) The TIPS solicitation document resulting in this Agreement; (2) Any addenda or
clarifications issued in relation to the TIPS solicitation; (3) All solicitation information provided to Vendor by TIPS through the TIPS
eBid System; (3) Vendor's entire proposal response to the TIPS solicitation including all accepted required attachments, acknowledged
notices and certifications, accepted negotiated terms, pricing, accepted responses to questions, and accepted written clarifications of
Vendor's proposal, and; any properly included attachments to this Agreement. All documentation and information listed is hereby
incorporated by reference as if set forth herein verbatim. In the event of conflict between the terms herein and one of the incorporated
documents the terms and conditions herein shall control.
5. Vendor's Specific Warranties, Terms, and License Agreements. Because TIPS serves public entities and non -profits throughout
the nation all of which are subject to specific laws and policies of their jurisdiction, as a matter of standard practice, TIPS does not
typically accept a Vendor's specific "Sale Terms" (warranties, license agreements, master agreements, terms and conditions, etc.) on
behalf of all TIPS Members. TIPS may permit Vendor to attach those to this Agreement to display to interested customers what terms
may apply to their Supplemental Agreement with Vendor (if submitted by Vendor for that purpose). However, unless this term of the
Agreement is negotiated and modified to state otherwise, those specific Sale Terms are not accepted by TIPS on behalf of all TIPS
Members and each Member may choose whether to accept, negotiate, or reject those specific Sale Terms, which must be reflected in a
separate agreement between Vendor and the Member in order to be effective.
6. Vendor Identity and Contact Information. It is Vendor's sole responsibility to ensure that all identifying vendor information (name,
EIN, d/b/a's, etc.) and contact information is updated and current at all times within the TIPS eBid System and the TIPS Vendor Portal.
It is Vendor's sole responsibility to confirm that all e-correspondence issued from tips-usa.com, ionwave.net, and tipsconstruction.com
TIPS Vendor Agreement Page 1
to Vendor's contacts are received and are not blocked by firewall or other technology security. Failure to permit receipt of
correspondence from these domains and failure to keep vendor identity and contact information current at all times during the life of
the contract may cause loss of TIPS Sales, accumulating TIPS fees, missed rebid opportunities, lapse of TIPS Contract(s), and
unnecessary collection or legal actions against Vendor. It is no defense to any of the foregoing or any breach of this Agreement that
Vendor was not receiving TIPS' electronic communications issued by TIPS to Vendor's listed contacts.
7. Initiation of TIPS Sales. When a public entity initiates a purchase with Vendor, if the Member inquires verbally or in writing whether
Vendor holds a TIPS Contract, it is the duty of the Vendor to verify whether the Member is seeking a TIPS purchase. Once verified,
Vendor must include the TIPS Contract Number on all purchase communications and sales documents exchanged with the TIPS
Member.
8. TIPS Sales and Supplemental Agreements. The terms of the specific TIPS order, including but not limited to: shipping, freight,
insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, order
assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, Invoice, etc.) (hereinafter "Supplemental
Agreement") entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement.
All Supplemental Agreements shall include Vendor's Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts
and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes,
unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer
to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor
accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order
for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the
terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control
unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement.
9. Right of Refusal. Vendor has the right not to sell to a TIPS Member under the awarded agreement at Vendor's discretion unless
otherwise required by law.
10. Reporting TIPS Sales. Vendor must report all TIPS Sales to TIPS. If a TIPS sale is initiated by Vendor receiving a TIPS Member's
purchase order from TIPS directly, Vendor may consider that specific TIPS Sale reported. Otherwise, with the exception of TIPS
Automated Vendors, who have signed an exclusive agreement with TIPS regarding reporting, all TIPS Sales must be reported to TIPS
by either: (1) Emailing the purchase order or similar purchase document (with Vendor's Name, as known to TIPS, and the TIPS
Contract Name and Number included) to TIPS at tinsnona,tins-usa.com with "Confirmation Only" in the subject line of the email within
three business days of Vendor's acceptance of the order, or; (2) Within 3 business days of the order being accepted by Vendor, Vendor
must login to the TIPS Vendor Portal and successfully self -report all necessary sale information within the Vendor Portal and confirm
that it shows up accurately on your current Vendor Portal statement. No other method of reporting is acceptable unless agreed to by
the Parties in writing. Failure to report all sales pursuant to this provision may result in immediate cancellation of Vendor's TIPS
Contract(s) for cause at TIPS' sole discretion. Please refer to the TIPS Accountine FAO's for more information about reporting sales
and if you have further questions, contact the Accounting Team at accountine(a,tins-usa.com.
11. TIPS Administration Fees. The collection of administrative fees by TIPS, a government entity, for performance of these procurement
services is required pursuant to Texas Government Code Section 791.011 et. seq. The administration fee ("TIPS Administration Fee")
is the amount legally owed by Vendor to TIPS for TIPS Sales made by Vendor. The TIPS Administration Fee amount is typically a
set percentage of the amount paid by the TIPS Member for each TIPS Sale, less shipping cost, bond cost, and taxes if applicable and
identifiable, which is legally due to TIPS, but the exact TIPS Administration Fee for this Contract is published in the corresponding
solicitation and is incorporated herein by reference. TIPS Administration Fees are due to TIPS immediately upon Vendor's receipt of
payment, including partial payment, for a TIPS Sale. The TIPS Administration Fee is assessed on the amount paid by the TIPS Member,
not on the Vendor's cost or on the amount for which the Vendor sold the item to a dealer or Authorized Reseller. Upon receipt of
payment for a TIPS Sale, including partial payment (which renders TIPS Administration Fees immediately due), Vendor shall issue to
TIPS the corresponding TIPS Administration Fee payment as soon as possible but not later than thirty-one calendar days following
Vendor's receipt of payment. Vendor shall pay TIPS via check unless otherwise agreed to by the Parties in writing. Vendor shall
include clear documentation with the issued payment dictating to which sale(s) the amount should be applied. Vendor may create a
payment report within their TIPS Vendor Portal which is the preferred documentation dictating to which TIPS Sale(s) the amount
should be applied. Failure to pay all TIPS Administration Fees pursuant to this provision may result in immediate cancellation of
Vendor's TIPS Contract(s) for cause at TIPS' sole discretion as well as the initiation of collection and legal actions by TIPS against
Vendor to the extent permitted by law. Any overpayment of participation fees to TIPS by Vendor will be refunded to the Vendor
within ninety (90) days of receipt of notification if TIPS receives written notification of the overpayment not later than the expiration
of six (6) months from the date of overpayment and TIPS determines that the amount was not legally due to TIPS pursuant to this
agreement and applicable law. Any notification of overpayment received by TIPS after the expiration of six (6) months from the date
that TIPS received the payment will render the overpayment non-refundable. Region 8 ESC and TIPS reserve the right to extend the
TIPS Vendor Agreement Page 2
six (6) month deadline if approved by the Region 8 ESC Board of Directors. TIPS reserves all rights under the law to collect TIPS
Administration Fees due to TIPS pursuant to this Agreement.
12. Term of the Agreement. This Agreement with TIPS is for approximately three years with a one-year, consecutive option for renewal
as described herein. Renewal options are not automatic and shall only be effective if offered by TIPS at its sole discretion. If TIPS
offers a renewal option, the Vendor will be notified via email issued to Vendor's then -listed Primary Contact. The renewal option shall
be deemed accepted by Vendor unless Vendor notifies TIPS of its objection to the renewal option in writing and confirms receipt by
TIPS.
Actual Effective Date: Agreement is effective upon signature by authorized representatives of both Parties. The Effective Date does
not affect the "Term Calculation Start Date."
Term Calculation Start Date: To keep the contract term consistent for all vendors awarded under a single TIPS contract, Vendor
shall calculate the foregoing term as starting on the last day of the month that "Award Notifications" are anticipated as published in the
Solicitation, regardless of the actual Effective Date.
Example of Term Calculation Start Date: If the anticipated "Award Date" published in the Solicitation is May 22, 2023, but extended
negotiations delay award until June 27, 2023 (Actual Effective Date), the Term Calculation Start Date shall be May 31, 2023 in this
example.
Contract Expiration Date: To keep the contract term consistent for all vendors awarded under a single TIPS contract, the term
expiration date shall be three -years from the Term Calculation Start Date.
Example of Contract Expiration Date: If the anticipated "Award Date" published in the Solicitation is May 22, 2023, but extended
negotiations delay award until June 27, 2023 (Actual Effective Date), the Term Calculation Start Date shall be May 31, 2023 and the
Contract Expiration Date of the resulting initial "three-year" term, (which is subject to an extension(s)) will be May 31, 2026 in this
example.
Option(s) for Renewal: Any option(s) for renewal shall begin on the Contract Expiration Date, or the date of the expiration of the
prior renewal term where applicable, and continue for the duration specified for the renewal option herein.
Example of Option(s) for Renewal: In this example, if TIPS offers a one-year renewal and the Contract Expiration Date is May 31,
2026, then the one-year renewal is effective from May 31, 2026 to May 31, 2027.
TIPS may offer to extend Vendor Agreements to the fullest extent the TIPS Solicitation resulting in this Agreement permits.
13. TIPS Pricing. Vendor agrees and understands that for each TIPS Contract that it holds, Vendor submitted, agreed to, and received
TIPS' approval for specific pricing, discounts, and other pricing terms and incentives which make up Vendor's TIPS Pricing for that
TIPS Contract ("TIPS Pricing"). Vendor confirms that Vendor will not add the TIPS Administration Fee as a charge or line -item in a
TIPS Sale. Vendor hereby certifies that Vendor shall only offer goods and services through this TIPS Contract if those goods and
services are included in or added to Vendor's TIPS Pricing and approved by TIPS. TIPS reserves the right to review Vendor's pricing
update requests as specifically as line -item by line -item to determine compliance. However, Vendor contractually agrees that all
submitted pricing updates shall be within the original terms of the Vendor's TIPS Pricing (scope, proposed discounts, price increase
limitations, and other pricing terms and incentives originally proposed by Vendor) such that TIPS may accept Vendors price increase
requests as submitted without additional vetting at TIPS discretion. Any pricing quoted by Vendor to a TIPS Member or on a TIPS
Quote shall never exceed Vendor's TIPS Pricing for any good or service offered through TIPS. TIPS Pricing price increases and
modifications, if permitted, will be honored according to the terms of the solicitation and Vendor's proposal, incorporated herein by
reference.
14. Indemnification of TIPS. VENDOR AGREES TO INDEMNIFY, HOLD HARMLESS, AND DEFEND TIPS, TIPS MEMBERS, TIPS
OFFICERS, TIPS EMPLOYEES, TIPS DIRECTORS, AND TIPS TRUSTEES (THE "TIPS INDEMNITEES") FROM AND AGAINST ALL
CLAIMS AND SUITS BY THIRD -PARTIES FOR DAMAGES, INJURIES TO PERSONS (INCLUDING DEATH). PROPERTY DAMAGES, LOSSES,
EXPENSES, FEES, INCLUDING COURT COSTS. ATTORNEY'S FEES, AND EXPERT FEES, ARISING OUT OF OR RELATING TO VENDOR'S
PERFORMANCE UNDER THIS AGREEMENT (INCLUDING THE PERFORMANCE OF VENDOR'S OFFICERS, EMPLOYEES, AGENTS.
AUTHORIZED RESELLERS, SUBCONTRACTORS. LICENSEES. OR INVITEES). REGARDLESS OF THE NATURE OF THE CAUSE OF ACTION.
INCLUDING WITHOUT LIMITATION CAUSES OF ACTION BASED UPON COMMON. CONSTITUTIONAL, OR STATUTORY LAW OR BASED IN
WHOLE OR IN PART UPON ALLEGATIONS OF NEGLIGENT OR INTENTIONAL ACTS OR OMISSIONS ON THE PART OF VENDOR. ITS
OFFICERS, EMPLOYEES, AGENTS, AUTHORIZED RESELLERS, SUBCONTRACTORS, LICENSEES. OR INVITEES. NO LIMITATION OF
LIABILITY FOR DAMAGES FOR PERSONAL INJURY OR PROPERTY DAMAGE ARE PERMITTED OR AGREED TO
BY TIPS. APART FROM THIS INDEMNIFICATION PROVISION REOUIRING INDEMNIFICATION OF THE TIPS INDEMNITEES'
ATTORNEY'S FEES AS SET FORTH ABOVE, RECOVERY OF ATTORNEYS' FEES BY THE PREVAILING PARTY IS AUTHORIZED ONLY IF
AUTHORIZED BY TEX. EDUC. CODE 4 44.032(F).
TIPS Vendor Agreement Page 3
15. Indemnification and Assumption of Risk — Vendor Data. VENDOR AGREES THAT IT IS VOLUNTARILY PROVIDING DATA
(INCLUDING BUT NOT LIMITED TO: VENDOR INFORMATION, VENDOR DOCUMENTATION, VENDOR'S PROPOSALS, VENDOR PRICING
SUBMITTED OR PROVIDED TO TIPS, TIPS CONTRACT DOCUMENTS, TIPS CORRESPONDENCE, VENDOR LOGOS AND IMAGES,
VENDOR'S CONTACT INFORMATION, VENDOR'S BROCHURES AND COMMERCIAL INFORMATION, VENDOR'S FINANCIAL
INFORMATION. VENDOR'S CERTIFICATIONS. AND ANY OTHER VENDOR INFORMATION OR DOCUMENTATION, INCLUDING WITHOUT
LIMITATION SOFTWARE AND SOURCE CODE UTILIZED BY VENDOR, SUBMITTED TO TIPS BY VENDOR AND ITS AGENTS) ("VENDOR
DATA") TO TIPS. FOR THE SAKE OF CLARITY, AND WITHOUT LIMITING THE BREADTH OF THE INDEMNITY OBLIGATIONS IN
SECTION 14 ABOVE, VENDOR AGREES TO PROTECT, INDEMNIFY, AND HOLD THE TIPS INDEMNITEES HARMLESS FROM AND AGAINST
ANY AND ALL LOSSES, CLAIMS, ACTIONS. DEMANDS, ALLEGATIONS, SUITS, JUDGMENTS, COSTS. EXPENSES, FEES, INCLUDING COURT
COSTS. ATTORNEY'S FEES, AND EXPERT FEES AND ALL OTHER LIABILITY OF ANY NATURE WHATSOEVER ARISING OUT OF OR
RELATING TO: (I) ANY UNAUTHORIZED. NEGLIGENT OR WRONGFUL USE OF, OR CYBER DATA BREACH INCIDENT AND VIRUSES OR
OTHER CORRUPTING AGENTS INVOLVING. VENDOR'S DATA, PRICING. AND INFORMATION, COMPUTERS, OR OTHER HARDWARE OR
SOFTWARE SYSTEMS, AND: (II) ALLEGATIONS OR CLAIMS THAT ANY VENDOR DATA INFRINGES ON THE INTELLECTUAL PROPERTY
RIGHTS OF A THIRD -PARTY OR VENDOR.
16. Procedures Related to Indemnification. In the event that an indemnity obligation arises, Vendor shall pay all amounts set forth in
Section 14 and 15 above (including any settlements) and — if it has accepted its indemnity obligation without qualification — control
the legal defense to such claim or cause of action, including without limitation attorney selection, strategy, discovery, trial, appeal, and
settlement, and TIPS shall, at Vendor's cost and expense (with respect to reasonable out of pocket costs and expenses incurred by TIPS
which shall be reimbursed to TIPS by Vendor), provide all commercially reasonable assistance requested by Vendor. In controlling
any defense, Vendor shall ensure that all assertions of governmental immunity and all applicable pleas and defenses shall be promptly
asserted.
17. Indemnity for Underlying Sales and Supplemental Agreements. Vendor shall be solely responsible for any customer claims or any
disputes arising out of TIPS Sales or any Supplemental Agreement as if sold in the open -market. The Parties agree that TIPS shall not
be liable for any claims arising out of Vendor's TIPS Sales or Supplemental Agreements, including but not limited to: allegations of
product defect or insufficiency, allegations of service defect or insufficiency, allegations regarding delivery defect or insufficiency,
allegations of fraud or misrepresentation, allegations regarding pricing or amounts owed for TIPS sales, and/or allegations regarding
payment, over -payment, under -payment, or non-payment for TIPS Sales. Payment/Drafting, overpayment/over-drafting, under-
payment/under-drafting, or non-payment for TIPS Sales between customer and Vendor and inspections, rejections, or acceptance of
such purchases shall be the exclusive respective obligations of Vendor/Customer, and disputes shall be handled in accordance with the
terms of the underlying Supplemental Agreement(s) entered into between Vendor and Customer. Vendor acknowledges that TIPS is
not a dealer, subcontractor, agent, or reseller of Vendor's goods and services and shall not be responsible for any claims arising out of
alleged insufficiencies or defects in Vendor's goods and services, should any arise.
18. Confidentiality of Vendor Data. Vendor understands and agrees that by signing this Agreement, all Vendor Data is hereby released
to TIPS, TIPS Members, and TIPS third -party administrators to effectuate Vendor's TIPS Contract except as provided for herein. The
Parties agree that Vendor Data is accessible by all TIPS Members as if submitted directly to that TIPS Member Customer for purchase
consideration. If Vendor otherwise considers any portion of Vendor's Data to be confidential and not subject to public disclosure
pursuant to Chapter 552 Texas Gov't Code (the "Public Information Act") or other law(s) and orders, Vendor must have identified the
claimed confidential materials through proper execution of the Confidentiality Claim Form which is required to be submitted as part
of Vendor's proposal resulting in this Agreement and incorporated by reference. The Confidentiality Claim Form included in Vendor's
proposal and incorporated herein by reference is the sole indicator of whether Vendor considers any Vendor Data confidential in the
event TIPS receives a Public Information Request. If TIPS receives a request, any responsive documentation not deemed confidential
by you in this manner will be automatically released. For Vendor Data deemed confidential by you in this manner, TIPS will follow
procedures of controlling statute(s) regarding any claim of confidentiality and shall not be liable for any release of information required
by law, including Attorney General determination and opinion. In the event that TIPS receives a written request for information
pursuant to the Public Information Act that affects Vendor's interest in any information or data furnished to TIPS by Vendor, and TIPS
requests an opinion from the Attorney General, Vendor may, at its own option and expense, prepare comments and submit information
directly to the Attorney General stating why the requested information is exempt from disclosure pursuant to the requirements of the
Public Information Act. Vendor is solely responsible for submitting the memorandum brief and information to the Attorney General
within the time period prescribed by the Public Information Act. Notwithstanding any other information provided in this solicitation
or Vendor designation of certain Vendor Data as confidential or proprietary, Vendor's acceptance of this TIPS Vendor Agreement
constitutes Vendor's consent to the disclosure of Vendor's Data, including any information deemed confidential or proprietary, to TIPS
Members or as ordered by a Court or government agency, including without limitation the Texas Attorney General. Vendor agrees
that TIPS shall not be responsible or liable for any use or distribution of information or documentation by TIPS Members or as required
by law.
TIPS Vendor Agreement Page 4
19. Vendor's Authorized Resellers. TIPS recognizes that many vendors operate in the open market through the use of resellers or dealers.
For that reason, TIPS permits Vendor to authorize Authorized Resellers within its Vendor Portal and make TIPS Sales through the
Authorized Reseller(s). Once authorized by Vendor in the Vendor Portal, the Authorized Reseller(s) may make TIPS sales to TIPS
Members. However, all purchase documents must include: (1) Authorized Reseller's Name; (2) Vendor's Name, as known to TIPS,
and; (3) Vendor's TIPS Contract Name and Number under which it is making the TIPS Sale. Either Vendor or Reseller may report the
sale pursuant to the terms herein. However, Vendor agrees that it is legally responsible for all reporting and fee payment as described
herein for TIPS Sales made by Authorized Resellers. The TIPS Administration Fee is assessed on the amount paid by the TIPS
Member, not on the Vendor's cost or on the amount for which the Vendor sold the item to a dealer or Authorized Reseller. The Parties
intend that Vendor shall be responsible and liable for TIPS Sales made by Vendor's Authorized Resellers. Vendor agrees that it is
voluntarily authorizing this Authorized Reseller and in doing so, Vendor agrees that it is doing so at its own risk and agrees to protect,
indemnify, and hold TIPS harmless in accordance with Sections 14-17 above related to Authorized Reseller TIPS Sales made pursuant
to this Agreement or purporting to be made pursuant to this Agreement that may be asserted against Vendor whether rightfully brought
or otherwise. The Parties further agree that it is no defense to Vendor's breach of this Agreement that an Authorized Reseller caused
Vendor of breach this Agreement.
20. Circumvention of TIPS Sales. When a public entity initiates a purchase with Vendor, if the Member inquires verbally or in writing
whether Vendor holds a TIPS Contract, it is the duty of the Vendor to verify whether the Member is seeking a TIPS purchase. Any
request for quote, customer communication, or customer purchase initiated through or referencing a TIPS Contract shall be completed
through TIPS pursuant to this Agreement. Any encouragement or participation by Vendor in circumventing a TIPS sale being
completed may result in immediate termination of Vendor's TIPS Contract(s) for cause as well as preclusion from future TIPS
opportunities at TIPS sole discretion.
21. State of Texas Franchise Tax. By signature hereon, Vendor hereby certifies that Vendor is not currently delinquent in the payment
of any franchise taxes owed to the State of Texas under Chapter 171 of the Texas Tax Code.
22. Termination.
A) Termination for Convenience. TIPS may, by written notice to Vendor, terminate this Agreement for convenience,
in whole or in part, at any time by giving thirty (30) days' written notice to Vendor of such termination, and
specifying the effective date thereof.
B) Termination for Cause. If Vendor fails to materially perform pursuant to the terms of this Agreement, TIPS shall
provide written notice to Vendor specifying the default. If Vendor does not cure such default within thirty (30)
days, TIPS may terminate this Agreement, in whole or in part, for cause. If TIPS terminates this Agreement for
cause, and it is later determined that the termination for cause was wrongful, the termination shall automatically
be converted to and treated as a termination for convenience.
C) Vendor's Termination. If TIPS fails to materially perform pursuant to the terms of this Agreement, Vendor shall
provide written notice to TIPS specifying the default (Notice of Default"). If TIPS does not cure such default
within thirty (30) days, Vendor may terminate this Agreement, in whole or in part, for cause. If Vendor
terminates this Agreement for cause, and it is later determined that the termination for cause was wrongful, the
termination shall automatically be converted to and treated as a termination for convenience.
D) Upon termination, all TIPS Sale orders previously accepted by Vendor shall be fulfilled and Vendor shall be
paid for all TIPS Sales executed pursuant to the applicable terms. All TIPS Sale orders presented to Vendor but
not fulfilled by Vendor, prior to the actual termination of this agreement shall be honored at the option of the
TIPS Member. TIPS shall submit to Vendor an invoice for any outstanding TIPS Administration Fees and
approved expenses and Vendor shall pay such fees and expenses within 30 calendar days of receipt of such valid
TIPS invoice. Vendor acknowledges and agrees that continued participation in TIPS is subject to TIPS' sole
discretion and that any Vendor may be removed from the TIPS program at any time with or without cause. This
termination clause does not affect TIPS Sales Supplemental Agreements pursuant to this term regarding
termination and the Survival Clause term.
E) Vendor hereby waives any and all claims for damages, including, but not limited, to consequential damages or
lost profits, that might arise from TIPS' act of terminating this Agreement.
23. Survival Clause. It is the intent of the Parties that this Agreement and procurement method applies to any TIPS Sale made during the
life of this Agreement even if made on or near the Contract Expiration Date as defined herein. Thus, all TIPS Sales, including but not
TIPS Vendor Agreement Page 5
limited to: leases, service agreements, license agreements, open purchase orders, warranties, and contracts, even if they extend months
or years past the TIPS Contract Expiration Date, shall survive the expiration or termination of this Agreement subject to the terms and
conditions of the Supplemental Agreement between Customer and Vendor or unless otherwise specified herein.
24. Audit Rights. Due to transparency statutes and public accountability requirements of TIPS and TIPS Members, Vendor shall at their
sole expense, maintain documentation of all TIPS Sales for a period of three years from the time of the TIPS Sale. In order to ensure
and confirm compliance with this agreement, TIPS shall have authority to conduct audits of Vendor's TIPS Pricing or TIPS Sales with
thirty -days' notice unless the audit is ordered by a Court Order or by a Government Agency with authority to do so without said notice.
Notwithstanding the foregoing, in the event that TIPS is made aware of any pricing being offered to eligible entities that is materially
inconsistent with Vendor's TIPS Pricing, TIPS shall have the ability to conduct the audit internally or may engage a third- party auditing
firm to investigate any possible non -compliant conduct or may terminate the Agreement according to the terms of this Agreement. In
the event of an audit, the requested materials shall be reasonably provided in the time, format, and at the location acceptable to TIPS.
TIPS agrees not to perform a random audit the TIPS transaction documentation more than once per calendar year, but reserves the right
to audit for just cause or as required by any governmental agency or court with regulatory authority over TIPS or the TIPS Member.
These audit rights shall survive termination of this Agreement for a period of one (1) year from the effective date of termination.
25. Conflicts of Interest. The Parties confirm that they have not offered, given, or accepted, nor intend to give at any time hereafter any
economic opportunity, future employment, gift, loan, gratuity, special discount, trip, favor, service to the other in connection with this
Agreement. Vendor affirms that, to the best of Vendor's knowledge, this Agreement has been arrived at independently, and is awarded
without collusion with anyone to obtain information or gain any favoritism that would in any way limit competition or give an unfair
advantage over other vendors in the award of this Agreement. Vendor agrees that it has disclosed any necessary affiliations with
Region 8 Education Service Center and the TIPS Department, if any, through the Conflict of Interest attachment provided in the
solicitation resulting in this Agreement.
26. Volume of TIPS Sales. Nothing in this Agreement or any TIPS communication may be construed as a guarantee that TIPS or TIPS
Members will submit any TIPS orders to Vendor at any time.
27. Compliance with the Law. The Parties agree to comply fully with all applicable federal, state, and local statutes, ordinances, rules,
and regulations applicable to their entity in connection with the programs contemplated under this Agreement.
28. Severability. If any term(s) or provision(s) of this Agreement are held by a court of competent jurisdiction to be invalid, void, or
unenforceable, then such term(s) or provision(s) shall be deemed restated to reflect the original intention of the Parties as nearly as
possible in accordance with applicable law and the remainder of this Agreement, and the remainder of the provisions of this Agreement
shall remain in full force and effect and shall in no way be affected, impaired or invalidated, unless such holding causes the obligations
of the Parties hereto to be impossible to perform or shall render the terms of this Agreement to be inconsistent with the intent of the
Parties hereto.
29. Force Majeure. If by reason of Force Majeure, either party hereto shall be rendered unable wholly or in part to carry out its obligations
under this Agreement through no fault of its own then such party shall give notice and full particulars of Force Majeure in writing to
the other party within a reasonable time after occurrence of the event or cause relied upon. Upon delivering such notice, the obligation
of the affected party, so far as it is affected by such Force Majeure as described, shall be suspended during the continuance of the
inability then claimed but for no longer period, and such party shall endeavor to remove or overcome such inability with all reasonable
dispatch. In the event that Vendor's obligations are suspended by reason of Force Majeure, all TIPS Sales accepted prior to the Force
Majeure event shall be the legal responsibility of Vendor and the terms of the TIPS Sale Supplemental Agreement shall control
Vendor's failure to fulfill for a Force Majeure event.
30. Immunity. Vendor agrees that nothing in this Agreement shall be construed as a waiver of sovereign or government immunity; nor
constitute or be construed as a waiver of any of the privileges, rights, defenses, remedies, or immunities available to Region 8 Education
Service Center or its TIPS Department. The failure to enforce, or any delay in the enforcement of, any privileges, rights, defenses,
remedies, or immunities available to Region 8 Education Service Center or its TIPS Department under this Agreement or under
applicable law shall not constitute a waiver of such privileges, rights, defenses, remedies, or immunities or be considered as a basis for
estoppel.
31. Insurance Requirements. Vendor agrees to maintain the following minimum insurance requirements for the duration of this
Agreement. All policies held by Vendor to adhere to this term shall be written by a carrier with a financial size category of VII and at
least a rating of "A-" by A.M. Best Key Rating Guide. The coverages and limits are to be considered minimum requirements and in
no way limit the liability of the Vendor(s). Any immunity available to TIPS or TIPS Members shall not be used as a defense by the
contractor's insurance policy. Only deductibles applicable to property damage are acceptable, unless proof of retention funds to cover
said deductibles is provided. "Claims made" policies will not be accepted. Vendor's required minimum coverage shall not be suspended,
TIPS Vendor Agreement Page 6
voided, cancelled, non -renewed or reduced in coverage or in limits unless replaced by a policy that provides the minimum required
coverage except after thirty (30) days prior written notice by certified mail, return receipt requested has been given to TIPS or the TIPS
Member if a project or pending delivery of an order is ongoing. Upon request, certified copies of all insurance policies shall be furnished
to the TIPS or the TIPS Member. Vendor agrees that when Vendor or its subcontractors are liable for any damages or claims, Vendor's
policy, shall be primary over any other valid and collectible insurance carried by the Member or TIPS.
General Liability: $1,000,000 each Occurrence/Aggregate
Automobile Liability: $300,000 Includes owned, hired & non -owned
Workers' Compensation: Statutory limits for the jurisdiction in which the Vendor performs under this Agreement. If Vendor performs
in multiple jurisdictions, Vendor shall maintain the statutory limits for the jurisdiction with the greatest dollar
policy limit requirement.
Umbrella Liability: $1,000,000 each Occurrence/Aggregate
32. Waiver. No waiver of any single breach or multiple breaches of any provision of this Agreement shall be construed to be a waiver of
any breach of any other provision. No delay in acting regarding any breach of any provision shall be construed to be a waiver of such
breach.
33. Binding Agreement. This Agreement shall be binding and inure to the benefit of the Parties hereto and their respective heirs, legal
successors, and assigns.
34. Headings. The paragraph headings contained in this Agreement are included solely for convenience of reference and shall not in any
way affect the meaning or interpretation of any of the provisions of this Agreement.
35. Choice of Law and Venue. This Agreement shall be governed by, construed, and enforced in accordance with the laws of the State
of Texas. Any proceeding, claim, action, or alternative dispute resolution arising out of or relating to this Agreement or involving TIPS
shall be brought in a State Court of competent jurisdiction in Camp County, Texas, or if Federal Court is legally required, a Federal
Court of competent jurisdiction in the Eastern District of Texas, and each of the Parties irrevocably submits to the exclusive jurisdiction
of said court in any such proceeding, waives any objection it may now or hereafter have to venue or to convenience of forum, agrees
that all claims in respect of the proceeding shall be heard and determined only in any such court, and agrees not to bring any proceeding
arising out of or relating to this procurement process or any contract resulting from or and contemplated transaction in any other court.
The Parties agree that either or both of them may file a copy of this paragraph with any court as written evidence of the knowing,
voluntary and freely bargained for agreement between the Parties irrevocably to waive any objections to venue or to convenience of
forum.
36. Relationship of the Parties. Nothing contained in this Agreement shall be construed to make one Party an agent of the other Party
nor shall either party have any authority to bind the other in any respect, unless expressly authorized by the other party in writing. The
Parties are independent contractors and nothing in this Agreement creates a relationship of employment, trust, agency or partnership
between them.
37. Assignment. No assignment of this Agreement or of any duty or obligation of performance hereunder, shall be made in whole or in
part by a Party hereto without the prior written consent of the other Party. Written consent of TIPS shall not be unreasonably withheld.
38. Minimum Condition and Warranty Requirements for TIPS Sales. All goods quoted or sold through a TIPS Sale shall be new
unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard
warranty unless otherwise agreed to in the Supplemental Agreement.
39. Minimum Customer Support Requirements for TIPS Sales. Vendor shall provide timely and commercially reasonable support for
TIPS Sales or as agreed to in the applicable Supplemental Agreement.
40. Minimum Shipping Requirements for TIPS Sales. Vendor shall ship, deliver, or provide ordered goods and services within a
commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member
as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the
delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.
41. Minimum Vendor License Requirements. Vendor shall maintain, in current status, all federal, state, and local licenses, bonds and
permits required for the operation of the business conducted by Vendor. Vendor shall remain fully informed of and in compliance with
all ordinances and regulations pertaining to the lawful provision of goods or services under the TIPS Agreement. TIPS and TIPS
Members reserve the right to stop work and/or cancel a TIPS Sale or terminate this or any TIPS Sale Supplemental Agreement involving
TIPS Vendor Agreement Page 7
Vendor if Vendor's license(s) required to perform under this Agreement or under the specific TIPS Sale have expired, lapsed, are
suspended or terminated subject to a 30-day cure period unless prohibited by applicable statue or regulation.
42. Minimum Vendor Legal Requirements. Vendor shall remain aware of and comply with this Agreement and all local, state, and
federal laws governing the sale of products/services offered by Vendor under this contract. Such applicable laws, ordinances, and
policies must be complied with even if not specified herein.
43. Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale).
Cleanup: When performing work on site at a TIPS Member's property, Vendor shall clean up and remove all debris and rubbish resulting
from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be
left in good repair and an orderly, neat, clean and unobstructed condition.
Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation
work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited
to: moving furniture, installing wiring for networks or power, and similar pre -installation requirements.
Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a
subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably
expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered
a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member's discretion. Vendor must identify any
additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no
additional charge.
Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly
maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created
by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers,
general public and existing structures from injury or damage.
Smoking: Persons working under Agreement shall adhere to the TIPS Member's or local smoking statutes, codes, ordinances, and
policies.
44. Payment for TIPS Sales. TIPS Members may make payments for TIPS Sales directly to Vendor, Vendor's Authorized Reseller, or
as otherwise agreed to in the applicable Supplemental Agreement after receipt of the invoice and in compliance with applicable payment
statutes. Regardless of how payment is issued or received for a TIPS Sale, Vendor is responsible for all reporting and TIPS
Administration Fee payment requirements as stated herein.
45. Marketing. Vendor agrees to allow TIPS to use their name and logo within the TIPS website, database, marketing materials, and
advertisements unless Vendor negotiates this term to include a specific acceptable -use directive. Any use of TIPS' name and logo or
any form of publicity, inclusive of press release, regarding this Agreement by Vendor must have prior approval from TIPS which will
not be unreasonably withheld. Request may be made by email to tinsna,tins-usa.com. For marketing efforts directed to TIPS Members,
Vendor must request and execute a separate Joint Marketing Disclaimer, at marketinglatins-usa.com, before TIPS can release contact
information for TIPS Member entities for the purpose of marketing your TIPS contract(s). Vendor must adhere to strict Marketing
Requirements once a disclaimer is executed. The Joint Marketing Disclaimer is a supplemental agreement specific to joint marketing
efforts and has no effect on the terms of the TIPS Vendor Agreement. Vendor agrees that any images, photos, writing, audio, clip art,
music, or any other intellectual property ("Property") or Vendor Data utilized, provided, or approved by Vendor during the course of
the joint marketing efforts are either the exclusive property of Vendor, or Vendor has all necessary rights, license, and permissions to
utilize said Property in the joint marketing efforts. Vendor agrees that they shall indemnify and hold harmless TIPS and its employees,
officers, agents, representatives, contractors, assignees, designees, and TIPS Members from any and all claims, damages, and judgments
involving infringement of patent, copyright, trade secrets, trade or services marks, and any other intellectual or intangible property
rights and/or claims arising from the Vendor's (including Vendor's officers', employees', agents', Authorized Resellers',
subcontractors', licensees', or invitees') unauthorized use or distribution of Vendor Data and Property.
46. Tax Exempt Status of TIPS Members. Most TIPS Members are tax exempt entities and the laws and regulations applicable to the
specific TIPS Member customer shall control.
47. Automatic Renewal Limitation for TIPS Sales. No TIPS Sale may incorporate an automatic renewal clause that exceeds month to
month terms with which the TIPS Member must comply. All renewal terms incorporated into a TIPS Sale Supplemental Agreement
TIPS Vendor Agreement Page 8
shall only be valid and enforceable when Vendor received written confirmation of acceptance of the renewal term from the TIPS
Member for the specific renewal term. The purpose of this clause is to avoid a TIPS Member inadvertently renewing an Agreement
during a period in which the governing body of the TIPS Member has not properly appropriated and budgeted the funds to satisfy the
Agreement renewal. Any TIPS Sale Supplemental Agreement containing an "Automatic Renewal" clause that conflicts with these
terms is rendered void and unenforceable.
48. Choice of Law Limitation for TIPS Sales. Vendor agrees that if any "Choice of Law" provision is included in any TIPS Sale
agreement/contract between Vendor and a TIPS Member, that clause must provide that the "Choice of Law" applicable to the TIPS
Sale agreement/contract between Vendor and TIPS Member shall be the state where the TIPS Member operates unless the TIPS
Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a "Choice of Law" clause that conflicts with
these terms is rendered void and unenforceable.
49. Venue Limitation for TIPS Sales. Vendor agrees that if any "Venue" provision is included in any TIPS Sale Agreement/contract
between Vendor and a TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution shall
be in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any TIPS Sale
Supplemental Agreement containing a "Venue" clause that conflicts with these terms is rendered void and unenforceable.
50. Indemnity Limitation for TIPS Sales. Texas and other jurisdictions restrict the ability of governmental entities to indemnify others.
Vendor agrees that if any "Indemnity" provision which requires the TIPS Member to indemnify Vendor is included in any TIPS sales
agreement/contract between Vendor and a TIPS Member, that clause must either be stricken or qualified by including that such
indemnity is only permitted, "to the extent permitted by the laws and constitution of [TIPS Member's State]" unless the TIPS Member
expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing an "Indemnity" clause that conflicts with these terms
is rendered void and unenforceable.
51. Arbitration Limitation for TIPS Sales. Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale
agreement/contract between Vendor and a TIPS Member, that clause may not require that the arbitration is mandatory or binding.
Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member,
that clause provides for only voluntary and non -binding arbitration unless the TIPS Member expressly agrees otherwise. Any TIPS
Sale Supplemental Agreement containing a "Arbitration" clause that conflicts with these terms is rendered void and unenforceable.
In Witness Whereof, the parties hereto, each acting under due and proper authority, have signed this Agreement.
TIPS Vendor Agreement Page 9
TIPS VENDOR AGREEMENT SIGNATURE
FORM TIPS RFP 230501 Agricultural and Animal
Equipment, Supplies, and Services
Vendor Name: W-W Manufacturing
Vendor Address: 8832 State Hwy 54
City: Thomas State: OK
Vendor Authorized Signatory Name: Sam Eck
Vendor Authorized Signatory Title: National Sales Manager
Vendor Authorized Signatory Phone: 800-999-1214
Zip Code: 73669
Vendor Authorized Signatory Email: SamE@wwmanufacturing.com
Vendor Authorized Si( iature:
s
(The folio wing is for TIPS con ipletion on1y)
TIPS Authorized Signatory Name: Dr. Fitts
TIPS Authorized Signatory Title: Executive Director
TIPS Authorized Signature:
4M4, ka4en-'e' rTAad"
Date: 6/15/23
Date:
7/25/2023
TIPS Vendor Agreement Signature Donn Page I
1k
230501
W W Livestock Systems
W-W Manufacturing Co., Inc.
Supplier Response
Event Information
Number: 230501
Title: Agricultural and Animal Equipment, Supplies, and Services
Type: Request for Proposal
Issue Date: 5/4/2023
Deadline: 6/16/2023 03:00 PM (CT)
Notes: This is a solicitation issued by The Interlocal Purchasing System (TIPS), a department of
Texas Region 8 Education Service Center. It is an Indefinite Delivery, Indefinite Quantity
("IDIQ") solicitation. It will result in contracts that provide, through adoption/"piggyback"
an indefinite quantity of supplies/services, during a fixed period of time, to TIPS public
entity and qualifying non-profit "TIPS Members" throughout the nation. Thus, there is no
specific project or scope of work to review. Rather this solicitation is issued as a
prospective award for utilization when any TIPS Member needs the goods or services
offered during the life of the agreement.
IF YOU CURRENTLY HOLDS TIPS CONTRACT 200501 AGRICULTURAL AND ANIMAL
EQUIPMENT, SUPPLIES AND SERVICES ("200501"), YOU MUST RESPOND TO THIS
SOLICITATION TO PREVENT LAPSE OF CONTRACT UNLESS YOU HOLD ANOTHER
CURRENT TIPS CONTRACT THAT COVERS ALL OF YOUR AGRICULTURAL AND ANIMAL
EQUIPMENT OFFERINGS. THIS AWARDED CONTRACT WILL REPLACE YOUR EXPIRING
TIPS CONTRACT 200501
Page 1 of 31 pages Vendor: W W Livestock Systems 230501
IF YOU HOLD ANOTHER TIPS CONTRACT OTHER THAN 200501 WHICH COVERS ALL OF
YOUR AGRICULTURAL AND ANIMAL EQUIPMENT OFFERINGS AND YOU ARE SATISFIED
WITH IT, THERE IS NO NEED TO RESPOND TO THIS SOLICITATION UNLESS YOU PREFER
TO HOLD BOTH CONTRACTS.
Contact Information
Address: Region 8 Education Service Center
4845 US Highway 271 North
Pittsburg, TX 75686
Phone: +1 (866) 839-8477
Email: bids@tips-usa.com
Page 2 of 31 pages Vendor: W W Livestock Systems 230501
W W Livestock Systems Information
Contact:
Doug Eyster
Address:
8832 Hwy 54
Thomas, OK 73669
Phone:
(800) 999-1214
Fax:
(580) 661-3722
Toll Free:
(800) 999-1214
Email:
douge@wwmanufacturing.com
Web Address:
wwmanufacturing.com
By submitting your response, you certify that you are authorized to represent and bind your company.
Sam Eck same@wwmanufacturing.com
Signature Email
Submitted at 6/15/2023 10:35:25 AM (CT)
Supplier Note
Thank you for your interest in W-W Livestock Systems. We truly believe that W-W offers the World's Finest in
livestock equipment, and we would appreciate the opportunity to provide you with all your livestock equipment
needs. Digital Signature
Requested Attachments
Vendor Agreement
01 _-_ TIPS _ Vendor —Agreement
(1).pdf
The Vendor Agreement must be downloaded from the "Attachments" section of the IonWave eBid System, reviewed,
Vendor Name placed in the line provided at the top, and uploaded to this location. If Vendor has proposed deviations
to the Vendor Agreement, Vendor may assert so in the Attribute Questions and those shall be addressed during
evaluation.
Pricing Form 1
price sheet.pdf
Pricing Form 1 must be downloaded from the "Attachments" section of the IonWave eBid System, reviewed, properly
completed as instructed, and uploaded to this location.
Alternate or Supplemental Pricing Documents
No response
Optional. If when completing Pricing Form 1 & Pricing Form 2 you direct TIPS to view additional, alternate, or
supplemental pricing documentation, you may upload that documentation.
Reference Form
230501 Reference Form.xlsx
The Reference Form must be downloaded from the "Attachments" section of the IonWave eBid System, reviewed,
properly completed, and uploaded to this location. The Reference Form must be uploaded in Excel format.
Required Confidentiality Claim Form
Confidentialit claim form.pdf
The Required Confidentiality Claim Form must be downloaded from the "Attachments" section of the IonWave eBid
System, reviewed, properly completed, and uploaded to this location. This is the only way for Vendor to assert
confidentiality of any information submitted.
Vendor's Warranties, Terms, and Conditions (Supplemental Vendor Warranty (1).pdf
Information Only)
Optional. If Vendor would like to display any standard warranties, terms, or conditions which are often applicable to
their offerings for TIPS and TIPS Member Customer consideration, Vendor may upload those at this location. These
supplemental documents shall not be considered part of the TIPS Contract. Rather, they are Vendor Supplemental
Information for marketing and informational purposes only.
Page 3 of 31 pages Vendor: W W Livestock Systems 230501
Conflict of Interest Questionnaire - Form CIQ
No response
Do not upload this form unless you have a reportable conflict with TIPS. There is an Attribute entitled "Conflict of
Interest Questionnaire Requirement" immediately followed by an Attribute entitled "Conflict of Interest Questionnaire
Requirement — Form CIQ — Continued." Properly respond to those Attributes and only upload this form if
applicable/instructed. If upload is required based on your response to those Attributes, the Conflict of Interest
Questionnaire — Form CIQ must be downloaded from the "Attachments" section of the IonWave eBid System,
reviewed, properly completed, and uploaded at this location.
Supplemental Vendor Information (Supplemental Vendor Information WW—Lit Sheets —ALL SINGLE PG
Only) 2023 sm.pdf
Optional. If Vendor would like to display or include any brochures, promotional documents, marketing materials, or
other Vendor Information for TIPS and TIPS Member Customer consideration, Vendor may upload those at this
location. These supplemental documents shall not be considered part of the TIPS Contract. Rather, they are Vendor
Supplemental Information for marketing and informational purposes only.
Disclosure of Lobbying Activities - Standard Form - LLL
No response
Do not upload this form unless Vendor has reportable lobbying activities. There are Attributes entitled, "2 CFR Part
200 or Federal Provision - Byrd Anti -Lobbying Amendment — Continued." Properly respond to those Attributes and
only upload this form if applicable/instructed. If upload is required based on your response to those Attributes, the
Disclosure of Lobbying Activities — Standard Form - LLL must be downloaded from the "Attachments" section of the
IonWave eBid System, reviewed, properly completed, and uploaded to this location.
Current Form W-9
W-9.pdf
Vendor must upload their current IRS Tax Form W-9. The legal name, EIN, and d/b/a's listed should match the
information provided herein exactly. This form will be utilized by TIPS to properly identify your entity.
Certificates & Licenses (Supplemental Vendor Information Only) No response
Optional. If Vendor would like to display any applicable certificates or licenses (including HUB certificates) for TIPS and
TIPS Member Customer consideration, Vendor may upload those at this location. These supplemental documents
shall not be considered part of the TIPS Contract. Rather, they are Vendor Supplemental Information for marketing
and informational purposes only.
Pricing Form 2
230501 Pricing Form 1 (1).xlsx
Pricing Form 2 must be downloaded from the "Attachments" section of the IonWave eBid System, reviewed, properly
completed as instructed, and uploaded to this location.
Vendor Agreement Signature Form
Vendor agreement.pdf
The Vendor Agreement Signature Form must be downloaded from the "Attachments" section of the IonWave eBid
System, reviewed, properly completed, and uploaded to this location. If Vendor has proposed deviations to the Vendor
Agreement, Vendor may leave the signature line of this page blank and assert so in the Attribute Questions and those
shall be addressed during evaluation.
Vendor Logo (Supplemental Vendor Information Only)
W-W Livestock Transparent.png
Optional. If Vendor desires that their logo be displayed on their public TIPS profile for TIPS and TIPS Member viewing,
Vendor may upload that logo at this location. These supplemental documents shall not be considered part of the TIPS
Contract. Rather, they are Vendor Supplemental Information for marketing and informational purposes only.
Bid Attributes
1 Disadvantaged/Minority/Women Business & Federal HUBZone
Some participating public entities are required to seek Disadvantaged/Minority/Women Business & Federal
HUBZone ("D/M/WBE/Federal HUBZone") vendors. Does Vendor certify that their entity is a D/M/WBE/Federal
HUBZone vendor?
If you respond "Yes," you must upload current certification proof in the appropriate "Response Attachments"
location.
NO
Page 4 of 31 pages Vendor: W W Livestock Systems 230501
2 Historically Underutilized Business (HUB)
Some participating public entities are required to seek Historically Underutilized Business (HUB) vendors as defined
by the Texas Comptroller of Public Accounts Statewide HUB Program. Does Vendor certify that their entity is a HUB
vendor?
If you respond "Yes," you must upload current certification proof in the appropriate "Response Attachments"
location.
INo
3 National Coverage
Can the Vendor provide its proposed goods and services to all 50 US States?
Yes - Al 150 States
4 States Served
If Vendor answered "No" to the question entitled "National Coverage," please list all states where vendor can
provide the goods and services proposed directly below. Your response may dictate which potential TIPS Member
customers consider purchasing your offerings.
N/A
5
Description of Vendor Entity and Vendor's Goods & Services
If awarded, this description of Vendor and Vendor's goods and services will appear on the TIPS website for
customer/public viewing.
W-W Manufacturing Co., Inc. ("W-W") began doing business in 1945 by designing and building quality livestock
handling equipment that cattleman and livestock producers everywhere would soon demand. W-W continues to
carry on the traditions of superior craftsmanship that earned us the reputation as the "World's Finest". W-W has
always had one goal in mind and that is first and foremost the customer. Our employees are dedicated to providing
efficient livestock handling equipment which is designed to minimize stress on the livestock while maximizing safety
and ease of handling to the operator. Dedicated to quality, W-W is in constant pursuit of ways to improve our
products to meet the customer's needs. W-W has manufacturing facilities in Thomas, OK, Duncan, OK and
Livingston, TN. W-W has many key personnel with hundreds of years of combined experience in the livestock
industry. With this extensive wealth of knowledge available for consultation, W-W can help design a system that is
perfect for any size operation or organization. W-W is the product of choice to many of the major Stock Shows &
Rodeos, Fairgrounds, Professional Associations, University Vet Schools and High School Ag Facilities around the
country. Our commitment is that we believe our first responsibility is to the customer who uses our products.
Excellence in everything we do takes top priority in meeting the needs of our customers. We are committed to
providing excellent, friendly service, a reliable staff, and a quality line of products that exceeds the needs of our
customers.
6 Primary Contact Name
Please identify the individual who will be primarily responsible for all TIPS matters and inquiries for the duration of
the contract.
Sam Eck
7 Primary Contact Title
Primary Contact Title
National Sales Manager
8 Primary Contact Email
Please enter a valid email address that will definitely reach the Primary Contact.
same@wwmanufacturing.com
Page 5 of 31 pages Vendor: W W Livestock Systems 230501
9 Primary Contact Phone
Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto -populate your entry with commas
once submitted which is appropriate and expected (Ex. 8,668,398,477).
Please provide the accurate and current phone number where the individual who will be primarily responsible for all
TIPS matters and inquiries for the duration of the contract can be reached directly.
1 80099912141
1 Primary Contact Fax
U Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
1 58066137221
1 Primary Contact Mobile
1 Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
58066111451
1 Secondary Contact Name
2 Please identify the individual who will be secondarily responsible for all TIPS matters and inquiries for the duration
of the contract.
Doug Eyster
1 Secondary Contact Title
3 Secondary Contact Title
CEO
1 Secondary Contact Email
4 Please enter a valid email address that will definitely reach the Secondary Contact.
douge@wwmanufacturing.com
1 Secondary Contact Phone
5 Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
Please provide the accurate and current phone number where the individual who will be secondarily responsible
for all TIPS matters and inquiries for the duration of the contract can be reached directly.
1 80099912141
1 Secondary Contact Fax
6 Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto -populate your entry with commas
once submitted which is appropriate and expected (Ex. 8,668,398,477).
58066137221
1 Secondary Contact Mobile
7 Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
1 58077248661
Page 6 of 31 pages Vendor: W W Livestock Systems 230501
1 Administration Fee Contact Name
8 Please identify the individual who will be responsible for all payment, accounting, and other matters related to
Vendor's TIPS Administration Fee due to TIPS for the duration of the contract.
Mike Dick
1 I Administration Fee Contact Email
9 Please enter a valid email address that will definitely reach the Administration Fee Contact.
miked@wwmanufacturing.com
2 Administration Fee Contact Phone
U Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
97053225061
2 Purchase Order and Sales Contact Name
1 Please identify the individual who will be responsible for receiving and processing purchase orders and sales under
the TIPS Contract.
Garrett Frans
2 I Purchase Order and Sales Contact Email
2 Please enter a valid email address that will definitely reach the Purchase Order and Sales Contact.
orders@wwmanufacturing.com
2 Purchase Order and Sales Contact Phone
3 Numbers only,no symbols or aces Ex. 8668398477. The system will auto -populate our entr with commas
Y p ( ) YY Y
once submitted which is appropriate and expected (Ex. 8,668,398,477).
1 80099912141
2 I Company Website
4 Company Website (Format - www.company.com)
2
5
www.wwmanufacturing.com I
Entity D/B/A's and Assumed Names
You must confirm that you are responding to this solicitation under your legal entity name. Go now to your Supplier
Profile in this eBid System and confirm that your profile reflects your "Legal Name" as it is listed on your W9.
In this question, please identify all of your entity's assumed names and D/B/A's. Please note that you will be
identified publicly by the Legal Name under which you respond to this solicitation unless you organize otherwise with
TIPS after award.
W-W Livestock, W-W Paul Scales
2 Primary Address
6 Primary Address
18832 State Hwy 54
2 Primary Address City
7 Primary Address City
Thomas
Page 7 of 31 pages Vendor: W W Livestock Systems 230501
2 Primary Address State
8 Primary Address State (2 Digit Abbreviation)
Oklahoma
2 Primary Address Zip
9 Primary Address Zip
173669
3 Search Words Identifying Vendor
U Please list all search words and phrases to be included in the TIPS database related to your entity. Do not list
words which are not associated with the bid category/scope (See bid title for general scope). This will help users
find you through the TIPS website search function. You may include product names, manufacturers, specialized
services, and other words associated with the scope of this solicitation.
Livestock, gate, gates, panel, panels, fence, stall, pen, pens, trap, boar, hog, pig, sheep, cattle, goat, horse, scale,
scales, design, steel, wire, arena, show, show ring, rodeo, bucking chute, roping chute, stripping chute, sweep,
tubs, alley, bow gate, post, calf, squeeze chute, chute, lane, galvanized, hot -dip galvanized, paint, powder coat,
corral, stalls, lead up, out gate, BoarBuster, cut gate, sort pens, portable, load chute, loading chute, hydraulic,
corral, express, Beefmaster, seedstock, producer, classic, chaparral, riata, lariat, cowhand, bud box, truss, rail,
placing pen, show ring, sale ring, auction ring, sheeted, quality, economical, heavy duty, world's finest, safe, safety,
sturdy, long lasting, custom, custom design, tailored, install, installation, setup, delivery, livestock, livestock
equipment, equipment, commercial, commercial livestock equipment, W-W, WW, W-W Livestock, WW Livestock
3 Certification of Vendor Residency (Required by the State of Texas)
1 Does Vendor's parent company or majority owner:
(A) have its principal place of business in Texas; or (B) employ at least 500 persons in Texas?
Texas Education Code Section 44.031 requires that this information be considered in evaluation for certain
contracts. However, Vendor response does not affect points, scoring, or potential award.
INo
3 Vendor's Principal Place of Business (City)
2 In what city is Vendor's principal place of business located?
Thomas
3 Vendor's Principal Place of Business (State)
3 In what state is Vendor's principal place of business located?
Oklahoma
3 Vendor's Years in Business
4 How many years has the business submitting this proposal been operating in its current capacity and field of work?
1 771
Page 8 of 31 pages Vendor: W W Livestock Systems 230501
Certification Regarding Entire TIPS Agreement
3
5
3
6
Vendor agrees that, if awarded, Vendor's final TIPS Contract will consist of the provisions set forth in the finalized
TIPS Vendor Agreement, Vendor's responses to these attribute questions, and: (1) The TIPS solicitation document
resulting in this Agreement; (2) Any addenda or clarifications issued in relation to the TIPS solicitation; (3) All
solicitation information provided to Vendor by TIPS through the TIPS eBid System; (3) Vendor's entire proposal
response to the TIPS solicitation including all accepted required attachments, acknowledged notices and
certifications, accepted negotiated terms, accepted pricing, accepted responses to questions, and accepted written
clarifications of Vendor's proposal, and; any properly included attachments to the TIPS Contract.
Does Vendor agree?
Yes, Vendor agrees
Minimum Percentage Discount Offered to TIPS Members on all Goods and Services (READ
CAREFULLY)
Please read thoroughly and carefully as an error on your response can render your contract award
unusable.
TIPS Members often turn to TIPS Contracts for ease of use and to receive discounted pricing.
What is the minimum percentage discount that you can offer TIPS Members off of all goods and service
pricing (whether offered through Pricing Form 1, Pricing Form 2, or in another accepted format) that you
offer? Only limited goods/services specifically identified and excluded from this discount in Vendor's
original proposal may be excluded from this discount.
Vendor must respond with a percentage from 0%-100%. The percentage discount that you input below will be
applied to your "Catalog Pricing", as defined in the solicitation, for all TIPS Sales made during the life of the
contract. You cannot alter this percentage discount once the solicitation legally closes. You will always be required
to discount every TIPS Sale by the percentage included below with the exception of limited goods/services
specifically identified and excluded from this discount in Vendor's original proposal. If you add goods or services to
your "Catalog Pricing" during the life of the contract, you will be required to sell those new items with this discount
applied.
Example: In this example, you enter a 10% minimum percentage discount below. In year -one of your TIPS
Contract, your published "Catalog Pricing" (website/store/published pricing) for "Tablet A" is $100 and for "Tablet
Set -Up Service" is $100. In this example, you must sell those items under the TIPS Contract at the proposed 10%
discounted price of: "Tablet A" - $90, "Tablet Set -Up Service" - $90. In year two of your TIPS Contract, you update
your "Catalog Pricing" with the market. You add "Tablet B" to your "Catalog Pricing" for $200 and have increased
the price of "Tablet A" to $110 and the price of "Tablet Set -Up Service" to $110. In this example, after the "Catalog
Pricing" update, you must still sell those items under the TIPS Contract at the proposed 10% discounted price
of: "Tablet A" - $99, "Tablet Set -Up Service" - $99, and "Tablet B" - $180.00.
With the exception of limited goods/services specifically identified and excluded from this discount in Vendor's
original proposal, if you cannot honor the discount on all goods and items now included or which may be added in
the future with certainty, then you should offer a lesser discount percentage below.
What is the minimum percentage discount that you can offer TIPS Members off of all goods and service
pricing (whether offered through Pricing Form 1, Pricing Form 2, or in another accepted format) that you
offer?
1 10% 1
Page 9 of 31 pages Vendor: W W Livestock Systems 230501
3 Honoring Vendor's Minimum Percentage Discount
7 Vendor is asked in these Attribute Questions to provide a Minimum Percentage Discount offered to TIPS Members
on all goods and services sold under the TIPS Contract. Points will be assigned for your response and scoring of
your proposal will be affected. A "YES" answer will be awarded the maximum 10 points and a "NO" answer will be
awarded 0 points.
Does Vendor agree to honor the Minimum Percentage Discount off of their TIPS "Catalog Pricing" that Vendor
proposed for all TIPS Sales made for the duration of the TIPS Contract?
Yes, Vendor agrees
3 Volume and Additional Discounts
8 In addition to the Minimum Percentage Discount proposed herein, does Vendor ever expect and intend to offer
additional, greater, or volume discounts to TIPS Members?
Point(s) may be assigned for your response in the category of "Pricing" during scoring and evaluation.
Yes
3 "Catalog Pricing" and Pricing Requirements
9 This is a reauirement of the TIPS Contract and is non-neaotiable.
In this solicitation and resulting contract, "Catalog Pricing" shall be defined as:
"The then available list of goods or services, in the most current listing regardless of date, that takes the form of a
catalog, price list, price schedule, shelf -price or other viewable format that:
A. is regularly maintained by the manufacturer or Vendor of an item; and
B. is either published or otherwise available for review by TIPS or a customer during the purchase process;
C. to which the Minimum Percentage Discount proposed by the proposing Vendor may be applied.
If awarded on this TIPS Contract, for the duration of the contract, Vendor agrees to provide, upon request, their
then current "Catalog Pricing." Or, in limited circumstances where Vendor has proposed the Percentage Mark -Up
method of pricing in this proposal, proof of Vendor's "cost" may be accepted by TIPS in place of catalog pricing.
YES
Pagel 0 of 31 pages Vendor: W W Livestock Systems 230501
EXCEPTIONS & DEVIATIONS TO TIPS STANDARD TERMS AND CONDITIONS
4
0
4
1
4
2
Vendor agrees that, if awarded, Vendor's final TIPS Contract will consist of the provisions set forth in the finalized
TIPS Vendor Agreement, Vendor's responses to these attribute questions, and: (1) The TIPS solicitation document
resulting in this Agreement; (2) Any addenda or clarifications issued in relation to the TIPS solicitation; (3) All
solicitation information provided to Vendor by TIPS through the TIPS eBid System; (3) Vendor's entire proposal
response to the TIPS solicitation including all accepted required attachments, acknowledged notices and
certifications, accepted negotiated terms, accepted pricing, accepted responses to questions, and accepted written
clarifications of Vendor's proposal, and; any properly included attachments to the TIPS Contract. In the event of
conflict between the terms of the finalized Vendor Agreement and one of the incorporated documents the terms and
conditions which are in the best interest of governmental/qualifying non-profit TIPS Members shall control at TIPS
sole discretion.
If Vendor responds, "No, Vendor does not agree" to this Attribute, after this solicitation legally closes and TIPS
begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor
Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. This
is the only proper way to submit proposed deviations for TIPS consideration. TIPS reserves the right to accept,
decline, or modify Vendor's requested negotiated terms. For this reason, answering "No, Vendor does not agree"
may ultimately delay or prevent award.
Does Vendor agree with TIPS standard terms and conditions as presented in the TIPS solicitation document (RFP,
RCSP, RFQ, or other) and the TIPS Vendor Agreement document?
Yes, Vendor agrees
TIPS Sales Reporting Requirements
This is a requirement of the TIPS Contract and is non-negotiable.
By submitting this proposal, Vendor certifies that Vendor will properly report all TIPS sales. With the exception of
TIPS Automated Vendors, who have signed an exclusive agreement with TIPS regarding reporting, all TIPS Sales
must be reported to TIPS by either:
(1) Emailing the purchase order or similar purchase document (with Vendor's Name, as known to TIPS, and the
TIPS Contract Name and Number included) to TIPS at tipspo@tips-usa.com with "Confirmation Only" in the subject
line of the email within three business days of Vendor's acceptance of the order, or;
(2) Within 3 business days of the order being accepted by Vendor, Vendor must login to the TIPS Vendor Portal and
successfully self -report all necessary sale information within the Vendor Portal and confirm that it shows up
accurately on your current Vendor Portal statement.
No other method of reporting is acceptable unless agreed to by the Parties in writing. Failure to report all sales
pursuant to this provision may result in immediate cancellation of Vendor's TIPS Contract(s) for cause at TIPS' sole
discretion.
TIPS Administration Fee Requirement and Acknowledgment
This is a requirement of the TIPS Contract and is non-negotiable.
The collection of fees by TIPS, a government entity, for performance of these procurement services is required
pursuant to Texas Government Code Section 791.011 et. seq. The TIPS Administration Fee is the amount legally
owed by Vendor to TIPS for TIPS Sales made by Vendor. The TIPS Administration Fee amount is typically a set
percentage of each TIPS Sale legally due to TIPS, but the exact TIPS Administration Fee for this Contract is
published in the corresponding RFP or RCSP document. TIPS Administration Fees are due to TIPS immediately
upon Vendor's receipt of payment, including partial payment, for a TIPS Sale.
By submitting a proposal, Vendor agrees that it has read, understands, and agrees to the published TIPS
Administration Fee amount, calculation, and payment requirements. By submitting a proposal Vendor further
confirms that all TIPS Pricing includes the TIPS Administration Fee and Vendor will not show adding the TIPS
Administration Fee as a charge or line -item in any TIPS Sale.
Page 11 of 31 pages Vendor: W W Livestock Systems 230501
4 TIPS Member Access to Vendor Proposal & Documentation
3 This is a requirement of the TIPS Contract and is non-negotiable.
Notwithstanding any other information provided in this solicitation or Vendor designation of certain documentation
as confidential or proprietary, Vendor's submission of this proposal constitutes Vendor's express consent to the
disclosure of Vendor's comprehensive proposal, including any information deemed confidential or proprietary, to
TIPS Members. The proposing Vendor agrees that TIPS shall not be responsible or liable for any use or
distribution of information or documentation to TIPS Members or by TIPS Members. By submitting this proposal,
Vendor certifies the foregoing.
4 Non -Collusive Bidding Certificate
4 This is a requirement of the TIPS Contract and is non-negotiable.
By submission of this proposal, the Vendor certifies that:
1) This proposal has been independently arrived at without collusion with any other entity, bidder, or with any
competitor;
2) This proposal has not been knowingly disclosed and will not be knowingly disclosed, prior to the opening of bids,
or proposals for this project, to any other bidder, competitor or potential competitor:
3) No attempt has been or will be made to induce any other person, partnership or corporation to modify, submit, or
not to submit a bid or proposal; and
4) The person signing this bid or proposal certifies that they are duly authorized to execute this proposal/contract
on behalf of Vendor and they have fully informed themselves regarding the accuracy of the statements contained in
this certification, and under the penalties being applicable to the bidder as well as to the person signing in its
behalf;
4 Antitrust Certification Statements (Tex. Government Code § 2155.005)
5 This is a requirement of the TIPS Contract and is non-negotiable.
By submission of this bid or proposal, Vendor certifies under penalty of perjury of the laws of the State of Texas that:
(1) I am duly authorized to execute this proposal/contract on my own behalf or on behalf of the company,
corporation, firm, partnership or individual (Vendor) identified herein;
(2) In connection with this proposal, neither I nor any representative of Vendor has violated any provision of the
Texas Free Enterprise and Antitrust Act, Tex. Bus. & Comm. Code Chapter 15;
(3) In connection with this proposal, neither I nor any representative of the Vendor has violated any federal antitrust
law;
(4) Neither I nor any representative of Vendor has directly or indirectly communicated any of the contents of this bid
to a competitor of the Company or any other company, corporation, firm, partnership or individual engaged in the
same line of business as the Company.
4 Limitation on Out -of -State Litigation - Texas Business and Commerce Code § 272
6 This is a requirement of the TIPS Contract and is non-negotiable.
Texas Business and Commerce Code § 272 prohibits a construction contract, or an agreement collateral to or
affecting the construction contract, from containing a provision making the contract or agreement, or any conflict
arising under the contract or agreement, subject to another state's law, litigation in the courts of another state, or
arbitration in another state. If included in Texas construction contracts, such provisions are voidable by a party
obligated by the contract or agreement to perform the work.
By submission of this proposal, Vendor acknowledges this law and if Vendor enters into a construction contract
with a Texas TIPS Member under this procurement, Vendor certifies compliance.
Page 12 of 31 pages Vendor: W W Livestock Systems 230501
4
7
Required Confidentiality Claim Form
This is a requirement of the TIPS Contract and is non-negotiable.
4
8
4
9
TIPS provides the required TIPS Confidentiality Claim Form in the "Attachments" section of this solicitation. Vendor
must execute this form by either signing and waiving any confidentiality claim, or designating portions of Vendor's
proposal confidential. If Vendor considers any portion of Vendor's proposal to be confidential and not subject to
public disclosure pursuant to Chapter 552 Texas Gov't Code or other law(s) and orders, Vendor must have
identified the claimed confidential materials through proper execution of the Confidentiality Claim Form.
If TIPS receives a public information act or similar request, any responsive documentation not deemed confidential
by you in this manner will be automatically released. For Vendor documents deemed confidential by you in this
manner, TIPS will follow procedures of controlling statute(s) regarding any claim of confidentiality and shall not be
liable for any release of information required by law, including Attorney General determination and opinion.
Notwithstanding any other Vendor designation of Vendor's proposal as confidential or proprietary, Vendor's
submission of this proposal constitutes Vendor's agreement that proper execution of the required TIPS
Confidentiality Claim Form is the only way to assert any portion of Vendor's proposal as confidential.
Non -Discrimination Statement and Certification
This is a requirement of the TIPS Contract and is non-negotiable.
In accordance with Federal civil rights law, all U.S. Departments, including but not limited to the USDA, USDE, FEMA,
are prohibited from discriminating based on race, color, national origin, religion, sex, gender identity (including
gender expression), sexual orientation, disability, age, marital status, family/parental status, income derived from a
public assistance program, political beliefs, or reprisal or retaliation for prior civil rights activity, in any program or
activity conducted or funded by federal funds (not all bases apply to all programs).
Vendor certifies that Vendor will comply with applicable Non -Discrimination and Equal Opportunity provisions set
forth in TIPS Member Customers' policies and other regulations at the local, state, and federal levels of
governments.
❑ Yes, I certify
Limitation of Vendor Indemnification and Similar Clauses
This is a requirement of the TIPS Contract and is non-negotiable.
TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the
State of Texas, is prohibited from indemnifying third -parties (pursuant to the Article 3, Section 52 of the Texas
Constitution) except as otherwise specifically provided for by law or as ordered by a court of competent
jurisdiction. Article 3, Section 52 of the Texas Constitution states that "no debt shall be created by or on behalf of
the State ... " and the Texas Attorney General has opined that a contractually imposed obligation of indemnity
creates a "debt" in the constitutional sense. Tex. Att'y Gen. Op. No. MW-475 (1982). Thus, contract clauses which
require TIPS to indemnify Vendor, pay liquidated damages, pay attorney's fees, waive Vendor's liability, or waive any
applicable statute of limitations must be deleted or qualified with "to the extent permitted by the Constitution and
Laws of the State of Texas."
Does Vendor agree?
1 Yes, I Agree
Page 13 of 31 pages Vendor: W W Livestock Systems 230501
5 Alternative Dispute Resolution Limitations
0 This is a requirement of the TIPS Contract and is non-negotiable.
TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the
State of Texas, does not agree to binding arbitration as a remedy to dispute and no such provision shall be
permitted in this Agreement with TIPS. Vendor agrees that any claim arising out of or related to this Agreement,
except those specifically and expressly waived or negotiated within this Agreement, may be subject to non -binding
mediation at the request of either party to be conducted by a mutually agreed upon mediator as prerequisite to the
filing of any lawsuit arising out of or related to this Agreement. Mediation shall be held in either Camp or Titus
County, Texas. Agreements reached in mediation will be subject to the approval by the Region 8 ESC's Board of
Directors, authorized signature of the Parties if approved by the Board of Directors, and, once approved by the
Board of Directors and properly signed, shall thereafter be enforceable as provided by the laws of the State of
Texas.
Does Vendor agree?
Yes, Vendor agrees
5 No Waiver of TIPS Immunity
This is a requirement of the TIPS Contract and is non-negotiable.
Vendor agrees that nothing in this Agreement shall be construed as a waiver of sovereign or government immunity;
nor constitute or be construed as a waiver of any of the privileges, rights, defenses, remedies, or immunities
available to Region 8 Education Service Center or its TIPS Department. The failure to enforce, or any delay in the
enforcement, of any privileges, rights, defenses, remedies, or immunities available to Region 8 Education Service
Center or its TIPS Department under this Agreement or under applicable law shall not constitute a waiver of such
privileges, rights, defenses, remedies, or immunities or be considered as a basis for estoppel.
Does Vendor agree?
❑ Yes, Vendor agrees
5 Payment Terms and Funding Out Clause
2 This is a requirement of the TIPS Contract and is non-negotiable.
Vendor agrees that TIPS and TIPS Members shall not be liable for interest or late -payment fees on past -due
balances at a rate higher than permitted by the laws or regulations of the jurisdiction of the TIPS Member.
Funding -Out Clause: Vendor agrees to abide by the applicable laws and regulations, including but not limited to
Texas Local Government Code § 271.903, or any other statutory or regulatory limitation of the jurisdiction of any
TIPS Member, which requires that contracts approved by TIPS or a TIPS Member are subject to the budgeting and
appropriation of currently available funds by the entity or its governing body.
Does Vendor agree?
0 Yes, Vendor agrees
5 Certification Regarding Prohibition of Certain Terrorist Organizations (Tex. Gov. Code 2270)
3 Vendor certifies that Vendor is not a company identified on the Texas Comptroller's list of companies known to have
contracts with, or provide supplies or services to, a foreign organization designated as a Foreign Terrorist
Organization by the U.S. Secretary of State.
Does Vendor certify?
Yes, Vendor certifies
Page 14 of 31 pages Vendor: W W Livestock Systems 230501
5 Certification Regarding Prohibition of Boycotting Israel (Tex. Gov. Code 2271)
4 If (a) Vendor is not a sole proprietorship; (b) Vendor has ten (10) or more full-time employees; and (c) this
Agreement or any agreement with a TIPS Member under this procurement has value of $100,000 or more, the
following certification shall apply; otherwise, this certification is not required. Vendor certifies, where applicable, that
neither the Vendor, nor any affiliate, subsidiary, or parent company of Vendor, if any, boycotts Israel, and Vendor
agrees that Vendor and Vendor Companies will not boycott Israel during the term of this Agreement. For purposes
of this Agreement, the term "boycott' shall mean and include refusing to deal with, terminating business activities
with, or otherwise taking any action that is intended to penalize, inflict economic harm on, or limit commercial
relations with Israel, or with a person or entity doing business in Israel or in an Israeli -controlled territory but does
not include an action made for ordinary business purposes.
When applicable, does Vendor certify?
Yes, Vendor certifies I
5 Certification Regarding Prohibition of Contracts with Certain Foreign -Owned Companies (Tex. Gov.
5 Code 2274)
Certain public entities are prohibited from entering into a contract or other agreement relating to critical
infrastructure that would grant Vendor direct or remote access to or control of critical infrastructure in this state,
excluding access specifically allowed by a customer for product warranty and support purposes.
Vendor certifies that neither it nor its parent company nor any affiliate of Vendor or its parent company, is (1) owned
by or the majority of stock or other ownership interest of the company is held or controlled by individuals who are
citizens of China, Iran, North Korea, Russia, or a designated country; (2) a company or other entity, including
governmental entity, that is owned or controlled by citizens of or is directly controlled by the government of China,
Iran, North Korea, Russia, or a designated country; or (3) headquartered in China, Iran, North Korea, Russia, or a
designated country.
For purposes of this certification, "critical infrastructure" means "a communication infrastructure system,
cybersecurity system, electric grid, hazardous waste treatment system, or water treatment facility." Vendor certifies
that Vendor will not grant direct or remote access to or control of critical infrastructure, except for product warranty
and support purposes, to prohibited individuals, companies, or entities, including governmental entities, owned,
controlled, or headquartered in China, Iran, North Korea, Russia, or a designated country, as determined by the
Governor.
When applicable, does Vendor certify?
Yes, Vendor certifies I
Page 15 of 31 pages Vendor: W W Livestock Systems 230501
5
6
5
7
Certification Regarding Prohibition of Discrimination Against Firearm and Ammunition Industries (Tex.
Gov. Code 2274)
If (a) Vendor is not a sole proprietorship; (b) Vendor has at least ten (10) full-time employees; and (c) this
Agreement or any Supplemental Agreement with certain public entities have a value of at least $100,000 that is
paid wholly or partly from public funds; (d) the Agreement is not excepted under Tex. Gov. Code 2274 and (e) the
purchasing public entity has determined that Vendor is not a sole -source provider or the purchasing public entity
has not received any bids from a company that is able to provide this written verification, the following certification
shall apply; otherwise, this certification is not required.
Vendor certifies that Vendor, or association, corporation, partnership, joint venture, limited partnership, limited
liability partnership, or limited liability company, including a wholly owned subsidiary, majority -owned subsidiary
parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice,
policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not
discriminate during the term of this contract against a firearm entity or firearm trade association.
For purposes of this Agreement, "discriminate against a firearm entity or firearm trade association" shall mean, with
respect to the entity or association, to: "(1) refuse to engage in the trade of any goods or services with the entity or
association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an
existing business relationship with the entity or association based solely on its status as a firearm entity or firearm
trade association; or (3) terminate an existing business relationship with the entity or association based solely on its
status as a firearm entity or firearm trade association."
"Discrimination against a firearm entity or firearm trade association" does not include: "(1) the established policies
of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm
accessories; and (2) a company's refusal to engage in the trade of any goods or services, decision to refrain from
continuing an existing business relationship, or decision to terminate an existing business relationship to comply
with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional
business reason that is specific to the customer or potential customer and not based solely on an entity's or
association's status as a firearm entity or firearm trade association."
When applicable, does Vendor certify?
Yes, Vendor certifies I
Certification Regarding Termination of Contract for Non -Compliance (Tex. Gov. Code 552.374)
If Vendor is not a governmental body and (a) this Agreement or any Supplemental Agreement with a public entity
has a stated expenditure of at least $1 million in public funds for the purchase of goods or services by certain public
entities; or (b) this Agreement or any Supplemental Agreement results in the expenditure of at least $1 million in
public funds for the purchase of goods or services by certain public entities in their fiscal year, the following
certification shall apply; otherwise, this certification is not required.
As required by Tex. Gov. Code 552.374, the following statement is included in the RFP and the Agreement (unless
the Agreement is (1) related to the purchase or underwriting of a public security; (2) is or may be used as collateral
on a loan; or (3) proceeds from which are used to pay debt service of a public security of loan): "The requirements
of Subchapter J, Chapter 552, Government Code, may apply to this solicitation and Agreement and the Vendor
agrees that this Agreement and any applicable Supplemental Agreement can be terminated if Vendor knowingly or
intentionally fails to comply with a requirement of that subchapter."
Pursuant to Chapter 552 of the Texas Government Code, Vendor certifies that Vendor shall: (1) preserve all
contracting information related to this Agreement as provided by the records retention requirements applicable to
TIPS or the purchasing TIPS Member for the duration of the Agreement; (2) promptly provide to TIPS or the
purchasing TIPS Member any contracting information related to the Agreement that is in the custody or possession
of Vendor on request of TIPS or the purchasing TIPS Member; and (3) on completion of the Agreement, either (a)
provide at no cost to TIPS or the purchasing TIPS Member all contracting information related to the Agreement that
is in the custody or possession of Vendor, or (b) preserve the contracting information related to the Agreement as
provided by the records retention requirements applicable to TIPS or the purchasing TIPS Member.
When applicable, does Vendor certify?
Yes, Vendor certifies I
Page 16 of 31 pages Vendor: W W Livestock Systems 230501
Certification Regarding Prohibition of Boycotting Certain Energy Companies (Tex. Gov. Code 2274)
5
8
5
9
If (a) Vendor is not a sole proprietorship; (b) Vendor has ten (10) or more full-time employees; and (c) this
Agreement or any Supplemental Agreement with certain public entities has a value of $100,000 or more that is to
be paid wholly or partly from public funds, the following certification shall apply; otherwise, this certification is not
required.
Vendor certifies that Vendor, or any wholly owned subsidiary, majority -owned subsidiary, parent company, or affiliate
of these entities or business associations, if any, do not boycott energy companies and will not boycott energy
companies during the term of the Agreement or any applicable Supplemental Agreement.
For purposes of this certification the term "company" shall mean an organization, association, corporation,
partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, that exists to
make a profit.
The term "boycott energy company" shall mean "without an ordinary business purpose, refusing to deal with,
terminating business activities with, or otherwise taking any action intended to penalize, inflict economic harm on, or
limit commercial relations with a company because the company (a) engages in the exploration, production,
utilization, transportation, sale, or manufacturing of fossil fuel -based energy and does not commit or pledge to meet
environmental standards beyond applicable federal and state law, or (b) does business with a company described
by paragraph (a)." (See Tex. Gov. Code 809.001).
When applicable, does Vendor certify?
Yes, Vendor certifies I
Felony Conviction Notice - Texas Education Code 44.034
Texas Education Code, Section 44.034, Notification of Criminal History, Subsection (a), states, "a person or
business entity that enters into a contract with a school district must give advance notice to the district if the person
or an owner or operator of the business entity has been convicted of a felony. The notice must include a general
description of the conduct resulting in the conviction of a felony."
Subsection (b) states, "a school district may terminate a contract with a person or business entity if the district
determines that the person or business entity failed to give notice as required by Subsection (a) or misrepresented
the conduct resulting in the conviction. The district must compensate the person or business entity for services
performed before the termination of the contract."
Subsection (c) states, "This section does not apply to a publicly held corporation.
Vendor certifies one of the following:
A. My firm is a publicly held corporation; therefore, this reporting requirement is not applicable, or;
B. My firm is not owned nor operated by anyone who has been convicted of a felony, or;
C. My firm is owned or operated by the following individual(s) who has/have been convicted of a felony.
If Vendor responds with Option (C), Vendor is required to provide information in the next attribute.
B. My firm is not owned nor operated by felon. I
Page 17 of 31 pages Vendor: W W Livestock Systems 230501
6 Felony Conviction Notice - Texas Education Code 44.034 - Continued
0 If Vendor selected Option (C) in the previous attribute,
1. Name of Felon(s)
2. The Felon(s) title/role in Vendor's entity, and
3. Details of Felon(s) Conviction(s).
No response
Vendor must provide the following information herein:
6 Conflict of Interest Questionnaire Requirement
Vendor agrees that it has looked up, read, and understood the current version of Texas Local Government Code
Chapter 176 which generally requires disclosures of conflicts of interests by Vendor hereunder if Vendor:
(1) has an employment or other business relationship with a local government officer of our local governmental
entity, or a family member of the officer, described by Section 176.003(a)(2)(A);
(2) has given a local government officer of our local governmental entity, or a family member of the officer, one or
more gifts with the aggregate value specified by Section 176.003(a)(2)(B), excluding any gift described by Section
176.003(a-1); or
(3) has a family relationship with a local government officer of our local governmental entity.
(4) Any other financial, commercial, or familial relationship with our local government that may warrant reporting
under this statute.
Does Vendor certify that it has NO reportable conflict of interest?
Yes, Vendor certifies - VENDOR HAS NO CONFLICT
6 Conflict of Interest Questionnaire Requirement - Form CIQ - Continued
2 If you responded "No, Vendor does not certify - VENDOR HAS CONFLICT" to the Conflict of Interest Questionnaire
question above, you are required by law to fully execute and upload the form attachment entitled "Conflict of
Interest Questionnaire - Form CIQ." If you accurately claimed no conflict above, you may disregard the form
attachment entitled "Conflict of Interest Questionnaire - Form CIQ."
Have you uploaded this form if applicable?
Yes 1
6 Upload of Current W-9 Required
3 Vendors are required by TIPS to upload a current, accurate W-9 Internal Revenue Service (IRS) Tax Form for your
entity. This form will be utilized by TIPS to properly identify your entity.
You must confirm that you are responding to this solicitation under your legal entity name. Go now to your Supplier
Profile in this eBid System and confirm that your profile reflects your "Legal Name" as it is listed on your W9.
6 Regulatory Good Standing Certification
4 Does Vendor certify that its entity is in good standing will all government entities and agencies, whether local, state,
or federal, that regulate any aspect of Vendor's field of work or business operations?
If Vendor selects "No", Vendor must provide explanation on the following attribute question.
Yes, Vendor certifies I
Page 18 of 31 pages Vendor: W W Livestock Systems 230501
6 Regulatory Good Standing Certification - Explanation - Continued
5 If Vendor responded to the prior attribute that "No", Vendor is not in good standing, Vendor must provide an
explanation of that lack of good standing here for TIPS consideration.
No response
6
6
Instructions Only - Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion
Instructions for Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion
1. By answering yes to the next Attribute question below, the vendor and prospective lower tier participant is
providing the certification set out herein in accordance with these instructions.
2. The certification in this clause is a material representation of fact upon which reliance was placed when this
transaction was entered into. If it is later determined that the prospective lower tier participant knowingly rendered
an erroneous certification in addition to other remedies available to the federal government, the department or
agency with which this transaction originated may pursue available remedies, including suspension and / or
debarment.
3. The prospective lower tier participant shall provide immediate written notice to the person to which this proposal
is submitted if at any time the prospective lower tier participant learns that its certification was erroneous when
submitted or has become erroneous by reason of changed circumstances.
4. The terms "covered transaction," "debarred," "suspended," "ineligible," "lower tier covered transaction,"
"participants," "person," "primary covered transaction," "principal," "proposal" and "voluntarily excluded," as used in
this clause, have the meanings set out in the Definitions and Coverage sections of rules implementing Executive
Order 12549. You may contact the person to which this proposal is submitted for assistance in obtaining a copy of
those regulations.
5. The prospective lower tier participant agrees by submitting this form that, should the proposed covered
transaction be entered into, it shall not knowingly enter into any lower tier covered transaction with a person who is
debarred, suspended, declared ineligible or voluntarily excluded from participation in this covered transaction,
unless authorized by the department or agency with which this transaction originated.
6. The prospective lower tier participant further agrees by submitting this form that it will include this clause titled
"Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion -Lower Tier Covered
Transaction" without modification in all lower tier covered transactions and in all solicitations for lower tier covered
transactions.
7. A participant in a covered transaction may rely upon a certification of a prospective participant in a lower tier
covered transaction that it is not debarred, suspended, ineligible or voluntarily excluded from the covered
transaction, unless it knows that the certification is erroneous. A participant may decide the method and frequency
by which it determines the eligibility of its principals. Each participant may, but is not required to, check the
Nonprocurement List.
8. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to
render in good faith the certification required by this clause. The knowledge and information of a participant is not
required to exceed that which is normally possessed by a prudent person in the ordinary course of business
dealings.
9. Except for transactions authorized under paragraph 5 of these instructions, if a participant in a covered
transaction knowingly enters into a lower tier covered transaction with a person who is suspended, debarred,
ineligible or voluntarily excluded from participation in this transaction, in addition to other remedies available to the
federal government, the department or agency with which this transaction originated may pursue available
remedies, including suspension and / or debarment.
Page 19 of 31 pages Vendor: W W Livestock Systems 230501
6 Suspension or Debarment Certification
7 Read the instructions in the attribute above and then answer the following accurately.
Vendor certifies that neither it nor its principals are presently debarred, suspended, proposed for debarment,
declared ineligible, or voluntarily excluded from participation in this transaction by any Federal department or
agency.
Does Vendor certify?
Yes, Vendor certifies
6 Vendor Certification of Criminal History - Texas Education Code Chapter 22
8 Texas Education Code Chapter 22 requires entities that contract with school districts to provide services to obtain
criminal history record information regarding covered employees. Contractors must certify to the district that they
have complied. Covered employees with disqualifying criminal histories are prohibited from serving at a school
district pursuant to this law.
DEFINITIONS
Covered employees: Employees of a contractor or subcontractor who have or will have continuing duties related
to the service to be performed at the District and have or will have direct contact with students. The District will be
the final arbiter of what constitutes direct contact with students.
Disqualifying criminal history: Any conviction or other criminal history information designated by the District, or
one of the following offenses, if at the time of the offense, the victim was under 18 or enrolled in a public school: (a)
a felony offense under Title 5, Texas Penal Code; (b) an offense for which a defendant is required to register as a
sex offender under Chapter 62, Texas Code of Criminal Procedure; or (c) an equivalent offense under federal law
or the laws of another state.
Vendor certifies:
NONE (Section A): None of the employees of Vendor and any subcontractors are covered employees, as defined
above. If this box is checked, I further certify that Contractor has taken precautions or imposed conditions to ensure
that the employees of Vendor and any subcontractor will not become covered employees. Contractor will maintain
these precautions or conditions throughout the time the contracted services are provided under this procurement.
�1 7
SOME (Section B): Some or all of the employees of Vendor and any subcontractor are covered employees. If this
box is checked, I further certify that: (1) Vendor has obtained all required criminal history record information
regarding its covered employees. None of the covered employees has a disqualifying criminal history; (2) If Vendor
receives information that a covered employee subsequently has a reported criminal history, Vendor will immediately
remove the covered employee from contract duties and notify the purchasing entity in writing within 3 business
days; (3) Upon request, Vendor will provide the purchasing entity with the name and any other requested
information of covered employees so that the purchasing entity may obtain criminal history record information on
the covered employees; (4) If the purchasing entity objects to the assignment of a covered employee on the basis
of the covered employee's criminal history record information, Vendor agrees to discontinue using that covered
employee to provide services at the purchasing entity.
Which option does Vendor certify?
Yes, I certify - NONE (Section A) I
Page 20 of 31 pages Vendor: W W Livestock Systems 230501
Certification Regarding "Choice of Law" Terms with TIPS Members
6
9
7
0
7
1
Vendor agrees that if any "Choice of Law" provision is included in any sales agreement/contract between Vendor
and a TIPS Member, that clause must provide that the "Choice of Law" applicable to the sales agreement/contract
between Vendor and TIPS Member shall be the state where the TIPS Member operates unless the TIPS Member
expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a "Choice of Law" clause that
conflicts with these terms is rendered void and unenforceable.
If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide
Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested
negotiations as redline edits for TIPS consideration.
Does Vendor agree?
Yes, Vendor agrees
Certification Regarding "Venue" Terms with TIPS Members
Vendor agrees that if any "Venue" provision is included in any sales agreement/contract between Vendor and a
TIPS Member, that clause must provide that the "Venue" for any litigation or alternative dispute resolution is shall be
in the state and county where the TIPS Member operates unless the TIPS Member expressly agrees otherwise. Any
TIPS Sale Supplemental Agreement containing a "Venue" clause that conflicts with these terms is rendered void and
unenforceable.
If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide
Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested
negotiations as redline edits for TIPS consideration.
Does Vendor agree?
Yes, Vendor agrees
Certification Regarding "Automatic Renewal" Terms with TIPS Members
Vendor agrees that no TIPS Sale may incorporate an "Automatic Renewal" clause that exceeds month to month
terms with which the TIPS Member must comply. All renewal terms incorporated into a TIPS Sale Supplemental
Agreement shall only be valid and enforceable when Vendor received written confirmation of acceptance of the
renewal term from the TIPS Member for the specific renewal term. The purpose of this clause is to avoid a TIPS
Member inadvertently renewing a Supplemental Agreement during a period in which the governing body of the TIPS
Member has not properly appropriated and budgeted the funds to satisfy the Agreement renewal. Any TIPS Sale
Supplemental Agreement containing an "Automatic Renewal" clause that conflicts with these terms is rendered void
and unenforceable.
If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide
Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested
negotiations as redline edits for TIPS consideration.
Does Vendor agree?
Yes, Vendor agrees
Page 21 of 31 pages Vendor: W W Livestock Systems 230501
Certification Regarding "Indemnity" Terms with TIPS Members
7
2
7
3
7
4
Texas and other jurisdictions restrict the ability of governmental entities to indemnify others. Vendor agrees that if
any "Indemnity" provision which requires the TIPS Member to indemnify Vendor is included in any sales
agreement/contract between Vendor and a TIPS Member, that clause must either be stricken or qualified by
including that such indemnity is only permitted, "to the extent permitted by the laws and constitution of [TIPS
Member's State]" unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement
containing an "Indemnity" clause that conflicts with these terms is rendered void and unenforceable.
If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide
Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested
negotiations as redline edits for TIPS consideration.
Does Vendor agree?
Yes, Vendor agrees
Certification Regarding "Arbitration" Terms with TIPS Members
Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor
and a TIPS Member, that clause may not require that the arbitration is mandatory or binding. Vendor agrees that if
any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member,
that clause provides for only voluntary and non -binding arbitration unless the TIPS Member expressly agrees
otherwise. Any TIPS Sale Supplemental Agreement containing a "Arbitration" clause that conflicts with these terms
is rendered void and unenforceable.
If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide
Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested
negotiations as redline edits for TIPS consideration.
Does Vendor agree?
Yes, Vendor agrees
2 CFR PART 200 AND FEDERAL CONTRACT PROVISIONS EXPLANATION
TIPS and TIPS Members will sometimes seek to make purchases with federal funds. In accordance with 2 C.F.R.
Part 200 of the Uniform Administrative Requirements, Cost Principles, and Audit Requirements for Federal Awards
(sometimes referred to as "EDGAR"),Vendor's response to the following questions labeled "2 CFR Part 200 or
Federal Provision" will indicate Vendor's willingness and ability to comply with certain requirements which may be
applicable to TIPS purchases paid for with federal funds, if accepted by Vendor.
Your responses to the following questions labeled "2 CFR Part 200 or Federal Provision" will dictate whether TIPS
can list this awarded contract as viable to be considered for a federal fund purchase. Failure to certify all
requirements labeled "2 CFR Part 200 or Federal Provision" will mean that your contract is listed as not
viable for the receipt of federal funds. However, it will not prevent award.
If you do enter into a TIPS Sale when you are accepting federal funds, the contract between you and the TIPS
Member will likely require these same certifications.
Page 22 of 31 pages Vendor: W W Livestock Systems 230501
7 2 CFR Part 200 or Federal Provision - Vendor Willingness to Accept Federal Funds
5 This certification is not required by federal law. However, TIPS Members are public entities and qualifying non-
profits which often receive federal funding and grants (ESSER, CARES Act, EDGAR, etc.) Accepting such funds
often requires additional required certifications and responsibilities for Vendor. The following attribute
questions include these required certifications. Your response to this questions, the following certifications, and
other factors will determine whether your contract award will be deemed as eligible for federal fund expenditures by
TIPS Members.
If awarded, is Vendor willing to accept payment for goods and services offered under this contract paid for by a
TIPS Member with federal funds?
Yes
7 2 CFR Part 200 or Federal Provision - Contracts
6 Contracts for more than the simplified acquisition threshold currently set at $250,000 (2 CFR § 200.320), which is
the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition
Regulations Council (Councils) as authorized by 41 U.S.C. 1908, must address administrative, contractual, or legal
remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and
penalties as appropriate.
Notice: Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region
8 and TIPS Members reserve all rights and privileges under the applicable laws and regulations with respect to this
procurement in the event of breach of contract by either party.
Does vendor agree?
Yes, Vendor agrees
7 2 CFR Part 200 or Federal Provision - Termination
7 Termination for cause and for convenience by the grantee or subgrantee including the manner by which it will be
effected and the basis for settlement. (All contracts in excess of $10,000)
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and
TIPS Members reserve the right to terminate any agreement in excess of $10,000 resulting from this procurement
process for cause after giving the vendor an appropriate opportunity and up to 30 days, to cure the causal breach
of terms and conditions. ESC Region 8 and TIPS Members reserve the right to terminate any agreement in excess
of $10,000 resulting from this procurement process for convenience with 30 days notice in writing to the awarded
vendor. The Vendor would be compensated for work performed and goods procured as of the termination date if for
convenience of the ESC Region 8 and TIPS Members. Any award under this procurement process is not exclusive
and the ESC Region 8 and TIPS reserves the right to purchase goods and services from other vendors when it is in
the best interest of the ESC Region 8 and TIPS.
Does vendor agree?
Yes, Vendor agrees
Page 23 of 31 pages Vendor: W W Livestock Systems 230501
7 2 CFR Part 200 or Federal Provision - Clean Air Act
8 Clean Air Act (42 U.S.C. 7401-7671q.) and the Federal Water Pollution Control Act (33 U.S.C. 1251-1387), as
amended —Contracts and subgrants of amounts in excess of $150,000 must contain a provision that requires the
non -Federal award to agree to comply with all applicable standards, orders or regulations issued pursuant to the
Clean Air Act (42 U.S.C. 7401-7671q) and the Federal Water Pollution Control Act as amended (33 U.S.C. 1251-
1387). Violations must be reported to the Federal awarding agency and the Regional Office of the Environmental
Protection Agency (EPA).
Pursuant to the Clean Air Act, et al above, when federal funds are expended by ESC Region 8 and TIPS Members,
ESC Region 8 and TIPS Members require that the proposer certify that during the term of an award by the ESC
Region 8 and TIPS Members resulting from this procurement process the vendor agrees to comply with all of the
above regulations, including all of the terms listed and referenced therein.
Does vendor agree?
Yes, Vendor agrees
7 2 CFR Part 200 or Federal Provision - Byrd Anti -Lobbying Amendment
9 Byrd Anti -Lobbying Amendment (31 U.S.C. 1352)—Contractors that apply or bid for an award exceeding $100,000
must file the required certification. Each tier certifies to the tier above that it will not and has not used Federal
appropriated funds to pay any person or organization for influencing or attempting to influence an officer or
employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of
Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 U.S.C. 1352.
Each tier must also disclose any lobbying with non -Federal funds that takes place in connection with obtaining any
Federal award. Such disclosures are forwarded from tier to tier up to the non -Federal award.
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and
TIPS Members require the proposer certify that during the term and during the life of any contract with ESC Region
8 and TIPS Members resulting from this procurement process the vendor certifiesthat it is in compliance with all
applicable provisions of the Byrd Anti -Lobbying Amendment (31 U.S.C. 1352).
Does Vendor agree?
Yes, Vendor agrees
Page 24 of 31 pages Vendor: W W Livestock Systems 230501
8
0
2 CFR Part 200 or Federal Provision - Byrd Anti -Lobbying Amendment - Continued
Applicable to Grants, Subgrants, Cooperative Agreements, and Contracts Exceeding $100,000 in Federal Funds
Submission of this certification is a prerequisite for making or entering into this transaction and is imposed by
the Byrd Anti -Lobbying Amendment (31 U.S.C. 1352). This certification is a material representation of fact upon
which reliance was placed when this transaction was made or entered into. Any person who fails to file the required
certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such
failure.
The undersigned certifies, to the best of his or her knowledge and belief, that:
(1) No Federal appropriated funds have been paid or will be paid by or on behalf of the undersigned, to any person
for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or
employee of congress, or an employee of a Member of Congress in connection with the awarding of a Federal
contract, the making of a Federal grant, the making of a Federal loan, the entering into a cooperative agreement,
and the extension, continuation, renewal, amendment, or modification of a Federal contract, grant, loan, or
cooperative agreement.
(2) If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing
or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of
congress, or an employee of a Member of Congress in connection with this Federal grant or cooperative
agreement, the undersigned shall complete and submit Standard Form-LLL, "disclosure Form to Report Lobbying,"
in accordance with its instructions.
(3) The undersigned shall require that the language of this certification be included in the award documents for all
covered subawards exceeding $100,000 in Federal funds at all appropriate tiers and that all subrecipients shall
certify and disclose accordingly.
Does Vendor certify that it has NOT lobbied as described herein?
Yes, Vendor certifies - NO Reportable Lobbying
8 2 CFR Part 200 or Federal Provision - Byrd Anti -Lobbying Amendment - Continued
If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must
download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form -
LLL", as instructed, to report the lobbying activities you performed or paid others to perform.
8 2 CFR Part 200 or Federal Provision - Federal Rule
2 Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42
U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental
Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of
$100,000)
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and
TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of
amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or
requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act
(33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15).
Does vendor certify compliance?
Yes, Vendor certifies I
Page 25 of 31 pages Vendor: W W Livestock Systems 230501
8 2 CFR Part 200 or Federal Provision - Procurement of Recovered Materials
3 A non -Federal entity that is a state agency or agency of a political subdivision of a state and its contractors must
comply with section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and
Recovery Act. The requirements of Section 6002 include: (1) procuring only items designated in guidelines of the
Environmental Protection Agency (EPA) at 40 CFR part 247 that contain the highest percentage of recovered
materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the
item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; (2)
procuring solid waste management services in a manner that maximizes energy and resource recovery; and
establishing an affirmative procurement program for procurement of recovered materials identified in the EPA
guidelines.
Does vendor certify that it is in compliance with these provisions?
Yes, Vendor certifies I
8 2 CFR Part 200 or Federal Provision - Rights to Inventions
4 If the Federal award meets the definition of "funding agreement" under 37 CFR §401.2 (a) and the recipient or
subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the
substitution of parties, assignment or performance of experimental, developmental, or research work under that
"funding agreement," the recipient or subrecipient must comply with the requirements of 37 CFR Part 401, "Rights
to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and
Cooperative Agreements," and any implementing regulations issued by the awarding agency.
Pursuant to the above, when the foregoing applies to ESC Region 8 and TIPS Members, Vendor certifies that
during the term of an award resulting from this procurement process, Vendor agrees to comply with all applicable
requirements as referenced in the Federal rule above.
Does vendor certify?
Yes, Vendor certifies I
Page 26 of 31 pages Vendor: W W Livestock Systems 230501
8
5
8
6
2 CFR Part 200 or Federal Provision - Domestic Preferences for Procurements and Compliance with
Buy America Provisions
As appropriate and to the extent consistent with law, TIPS Member Customers, to the greatest extent practicable
under a Federal award, may provide a preference for the purchase, acquisition, or use of goods, products, or
materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other
manufactured products). Vendor agrees that the requirements of this section will be included in all subawards
including all contracts and purchase orders for work or products under this award, to the greatest extent practicable
under a Federal award. For purposes of 2 CFR Part 200.322, "Produced in the United States" means, for iron and
steel products, that all manufacturing processes, from the initial melting stag through the application of coatings,
occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, "Manufactured products" means
items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and
polymer -based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber,
and lumber.
Vendor certifies that it is in compliance with all applicable provisions of the Buy America Act. Purchases made in
accordance with the Buy America Act must still follow the applicable procurement rules calling for free and open
competition. For purposes of 2 CFR Part 200.322,
"Produced in the United States" means, for iron and steel products, that all manufacturing processes, from the initial
melting stage through the application of coatings, occurred in the United States.
"Manufactured products" means items and construction materials composed in whole or in part of non-ferrous
metals such as aluminum; plastics and polymer -based products such as polyvinyl chloride pipe; aggregates such as
concrete; glass, including optical fiber; and lumber.
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies
that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of
goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel,
cement, and other manufactured products).
Does Vendor Certify?
Yes, Vendor certifies
2 CFR Part 200 or Federal Provision - Ban on Foreign Telecommunications
ESC 8 and TIPS Members are prohibited from obligating or expending Federal financial assistance, to include loan
or grant funds, to: (1) procure or obtain, (2) extend or renew a contract to procure or obtain, or (3) enter into a
contract (or extend or renew a contract) to procure or obtain, equipment, services, or systems that use "covered
telecommunications" equipment or services as a substantial or essential component of any system, or as critical
technology as part of any system. "Covered telecommunications" equipment is telecommunications equipment
produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities), and
physical security surveillance of critical infrastructure and other national security purposes, and video surveillance
and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital
Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities) for the
purpose of public safety, security of government facilities, physical security surveillance of critical infrastructure, and
other national security purposes detailed in 2 CFR § 200.216.
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies
that Vendor will not purchase equipment, services, or systems that use "covered telecommunications", as defined
by 2 CFR §200.216 equipment or services as a substantial or essential component of any system, or as critical
technology as part of any system.
Does vendor certify?
Yes, Vendor certifies
Page 27 of 31 pages Vendor: W W Livestock Systems 230501
8 2 CFR Part 200 or Federal Provision - Contract Cost & Price
7 For contracts more than the simplified acquisition threshold currently set at $250,000, a TIPS Member may, in very
rare circumstances, be required to negotiate profit as a separate element of the price pursuant to 2 C.F.R.
200.324(b). Under those circumstances, Vendor agrees to provide information and negotiate with the TIPS Member
regarding profit as a separate element of the price. However, Vendor certifies that the total price charged by the
Vendor shall not exceed the Vendor's TIPS pricing and pricing terms proposed.
Does Vendor certify?
Yes, Vendor certifies
8 2 CFR Part 200 or Federal Provision - Equal Employment Opportunity
8 Except as otherwise provided under 41 CFR Part 60, all contracts that meet the definition of "federally assisted construction contract"
in 41 CFR Part 60-1.3 must include the equal opportunity clause provided under 41 CFR 60-1.4(b), in accordance with Executive
Order 11246, "Equal Employment Opportunity" (30 FR 12319, 12935, 3 CFR Part, 1964-1965 Comp., p. 339), as amended by
Executive Order 11375, "Amending Executive Order 11246 Relating to Equal Employment Opportunity," and implementing regulations at
41 CFR part 60, "Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor."
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members on any federally
assisted construction contract, the equal
opportunity clause is incorporated by reference here.
Does Vendor Certify?
Yes, Vendor certifies
8 2 CFR Part 200 or Federal Provision - Davis Bacon Act Compliance
9 Texas Statute requires compliance with Davis -Bacon Act, as amended (40 U.S.C. 3141-3148). When required by
Federal program legislation, all prime construction contracts in excess of $2,000 awarded by non -Federal entities must
include a provision for compliance with the Davis -Bacon Act (40 U.S.C. 3141-3144, and 3146- 3148) as
supplemented by Department of Labor regulations (29 CFR Part 5, "Labor Standards Provisions Applicable to
Contracts Covering Federally Financed and Assisted Construction"). In accordance with the statute, contractors
must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a
wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less
than once a week. The non- Federal entity must place a copy of the current prevailing wage determination issued by
the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned
upon the acceptance of the wage determination. The non -Federal entity must report all suspected or reported
violations to the Federal awarding agency. The contracts must also include a provision for compliance with the
Copeland "Anti -Kickback" Act (40 U.S.C. 3145), as supplemented by Department of Labor regulations (29 CFR Part
3, "Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or
Grants from the United States"). The Act provides that each contractor or subrecipient must be prohibited from
inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up
any part of the compensation to which he or she is otherwise entitled. The non -Federal entity must report all
suspected or reported violations to the Federal awarding agency.
Pursuant to state and federal requirements, Vendor certifies that it will be in compliance with all applicable Davis -Bacon
Act provisions if/when applicable.
Does Vendor certify?
Yes, Vendor certifies
Page 28 of 31 pages Vendor: W W Livestock Systems 230501
9 2 CFR Part 200 or Federal Provision - Contract Work Hours and Safety Standards
0 Where applicable, all contracts awarded by ESC 8 and TIPS Members in excess of $100,000 that involve the
employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as
supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor
must be required to compute the wages of every mechanic and laborer on the basis of a standard workweek of 40
hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of
not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week.
The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must
be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous.
These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open
market, or contracts for transportation or transmission of intelligence.
Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that
during the term of an award for all contracts resulting from this procurement process, Vendor will be in compliance
with all applicable provisions of the Contract Work Hours and Safety Standards Act.
Does Vendor certify?
Yes, Vendor certifies
9 2 CFR Part 200 or Federal Provision - FEMA Fund Certification & Certification of Access to Records
1
If and when Vendor accepts a TIPS purchase paid for in full or part with FEMA funds, Vendor certifies that:
(1) Vendor agrees to provide the TIPS Member, the FEMA Administrator, the Comptroller General of the United
States, or any of their authorized representatives access to and rights to reproduce any books, documents,
papers, and records of the Contractor which are directly pertinent to this contract, or any contract resulting from
this procurement, for the purposes of making audits, examinations, excerpts, and transcriptions. This right also
includes timely and reasonable access to Vendor's personnel for the purpose of interview and discussion relating
to such documents. Vendor agrees to provide the FEMA Administrator or an authorized representatives access to
construction or other work sites pertaining to the work being completed under the contract. Vendor acknowledges
and agrees that no language in this contract or the contract with the TIPS Member is intended to prohibit audits or
internal reviews by the FEMA Administrator or the Comptroller General of the United States.
(2) The Vendor shall not use the Department of Homeland Security's seal(s), logos, crests, or reproductions of flags
or likenesses of DHS agency officials without specific FEMA pre -approval.
(3) The Vendor will comply with all applicable Federal law, regulations, executive orders, FEMA policies, procedures,
and directives.
(4) The Federal Government is not a party to this contract and is not subject to any obligations or liabilities to the
non -Federal entity, contractor, or any other party pertaining to any matter resulting from the contract.
(5) The Vendor acknowledges that 31 U.S.C. Chap. 38 (Administrative Remedies for False Claims and Statements)
applies to the Vendor's actions pertaining to this contract.
Does Vendor certify?
Yes, Vendor certifies
9 2 CFR Part 200 or Federal Provision - Certification of Compliance with the Energy Policy and
2 Conservation Act
When appropriate and to the extent consistent with the law, Vendor certifies that it will comply with the Energy Policy
and Conservation Act (42 U.S.C. 6321 et seq; 49 C.F.R. Part 18) and any state mandatory standards and policies
relating to energy efficiency which are contained in applicable state energy conservation plans issued in compliance
with the Act.
Does Vendor certify?
Yes, Vendor certifies
Page 29 of 31 pages Vendor: W W Livestock Systems 230501
9 2 CFR Part 200 or Federal Provision - Certification of Compliance with Never Contract with the Enemy
3 Where applicable, all contracts awarded by ESC 8 and TIPS Members in excess of $50,000.00, within the period of
performance, and which are performed outside of the United States, including U.S. territories, are subject to the
regulations implementing Never Contract with the Enemy in 2 CFR part 183. Per 2 CFR part 183, in the situation
specified, ESC 8 and TIPS Members shall terminate any contract or agreement resulting from this procurement
which violates the Never Contract with the Enemy regulation in 2 CFR part 183, including if Vendor is actively
opposing the United States or coalition forces involved in a contingency operation in which members of the the
Armed Forces are actively engaged in hostilities. Vendor certifies that it is neither an excluded entity under the
System for Award Management (SAM) nor Federal Awardee Performance and Integrity Information System (FAPIIS)
for any contract terminated due to Never Contract with the Enemy as a Termination for Material Failure to Comply.
Does Vendor certify?
Yes, Vendor certifies
9 2 CFR Part 200 or Federal Provision - Certification of Compliance with EPA Regulations
4 For contracts resulting from this procurement, in excess of $100,000.00 and paid for with federal funds, Vendor
certifies that Vendor will comply with all applicable standards, orders, regulations, and/or requirements issued
pursuant to the Clean Air Act of 1970, as amended (42 U.S.C. 1857(h)), Section 508 of the Clean Water Act, as
amended (33 U.S.C. 1368), Executive Order 117389 and Environmental Protection Agency Regulation, 40 CFR Part
15.
Does Vendor certify?
Yes, Vendor certifies
9 2 CFR Part 200 or Federal Provision - Record Retention Requirements
5 For contracts resulting from this procurement, paid for by ESC 8 or TIPS Members with federal funds, Vendor
certifies that Vendor will comply with the record retention requirements detailed in 2 CFR § 200.334. Vendor certifies
that Vendor will retain all records as required by 2 CFR § 200.334 for a period of three years after final expenditure or
financial reports, as applicable, and all other pending matters are closed.
Does Vendor certify?
Yes, Vendor certifies
9 2 CFR Part 200 or Federal Provision - Subcontracting and Affirmative Steps for Small and Minority
6 Businesses, Women's Business Enterprises, and Labor Surplus Area Firms.
Do you ever anticipate the possibility of subcontracting any of your work under this award if you are successful?
If you respond "Yes", you must respond to the following attribute question accurately. If you respond "No", you may
skip the following attribute question.
YES I
Page 30 of 31 pages Vendor: W W Livestock Systems 230501
9 2 CFR Part 200 or Federal Provision - If "Yes" Response to Above Attribute - Continued -
7 Subcontracting and Affirmative Steps for Small and Minority Businesses, Women's Business
Enterprises, and Labor Surplus Area Firms.
Only respond to this question if you responded "Yes" to the attribute question directly above. Skip this
question if you responded "No" to the attribute question directly above.
Does Vendor certify that it will follow the following affirmative steps? Federal Regulation 2 CFR §200.321
Contracting with small and minority businesses, women's business enterprises, and labor surplus area firms. (a)The
non -Federal entity must take all necessary affirmative steps to assure that minority businesses, women's business
enterprises, and labor surplus area firms are used when possible.
(b) Affirmative steps must include:
(1) Placing qualified small and minority businesses and women's business enterprises on solicitation lists;
(2) Assuring that small and minority businesses, and women's business enterprises are solicited whenever they are
potential sources;
(3) Dividing total requirements, when economically feasible, into smaller tasks or quantities to permit maximum
participation by small and minority businesses, and women's business enterprises;
(4) Establishing delivery schedules, where the requirement permits, which encourage participation by small and
minority businesses, and women's business enterprises;
(5) Using the services and assistance, as appropriate, of such organizations as the Small Business Administration
and the Minority Business Development Agency of the Department of Commerce ; and
(6) Requiring the prime contractor, if subcontracts are to be let, to take the affirmative steps listed in paragraphs(1)
through (5) of this section.
Does Vendor certify?
Yes, Vendor certifies
9 ACKNOWLEDGMENT & BINDING CORPORATE AUTHORITY
8 By submitting this proposal, the individual(s) submitting on behalf of the Vendor certify that they are authorized by
Vendor to complete and submit this proposal on behalf of Vendor and that this proposal was duly submitted on
behalf of Vendor by authority of its governing body, if any, and within the scope of its corporate powers.
Vendor further certifies that it has read, examined, and understands all portions of this solicitation including but not
limited to all attribute questions, attachments, solicitation documents, bid notes, and the Vendor Agreement(s).
Vendor certifies that, if necessary, Vendor has consulted with counsel in understanding all portions of this
solicitation.
Page 31 of 31 pages Vendor: W W Livestock Systems 230501
TIPS 230501 Agricultural
W-w
and Animal Equipment,
Manufacturing
Supplies, and Services
,
TIPS REFERENCE FORM
riii ict4uwLvu niivimaLiun iuu3L uv Lyjjvu aiiu upwauvu m ivimm. Lv iivL iiaiiuwimw vi upivau m airy
format other than Excel. Emails provided must be current and active. Do not include TIPS/Region 8
employees as a reference. The entities that you provide must be paying customers, not
government or non-profit entities, who have purchased goods or services from your vendor entity within the
Valid Contact
Customer Entity Name
Customer Contact
Valid Contact Email
Phone
Texas Department of Agriculture
Jon Garza
ion.garza@texasagriculture.gov
(512) 463-6098
Sweetwater Events Complex
Kandi Pendleton
kpendleton@sweetwaterevents.com
(307) 352-6789
Brazos County Expo Complex
Tom Quarles
tauarles@co.brazos.tx.us
(979) 823-3976
Katy ISD
Guy James
GuvDJames@katvisd.org
(281) 396-2638
Pleasanton ISD
John Lanier
ilanier@iisdtx.us
(210) 414-5726
State Fair of Texas
Daryl Real
dreal@bigtex.com
(214) 421-8725
TIPS CONTRACT 230501
REQUIRED CONFIDENTIALITY CLAIM FORM
(VENDOR MUST COMPLETE THE FOLLOWING VENDOR INFORMATION)
Vendor Entity Name: W-W Manufacturing
Vendor Authorized Signatory Name: Sam Eck
Vendor Authorized Signatory Title: National Sales Manager
Vendor Authorized Signatory Email: SamE@wwmanufacturing.com
Vendor Address: 8832 State Hwy 54
City: Thomas
State: OK zip Code: 73669
Vendor agrees that it is voluntarily providing its data (including but not limited to: Vendor information, Vendor documentation, Vendor's
proposal, Vendor pricing submitted or provided to TIPS, TIPS contract documents, TIPS correspondence, Vendor logos and images,
Vendor's contact information, Vendor's brochures and commercial information, Vendor's financial information, Vendor's
certifications, and any other Vendor information or documentation submitted to TIPS by Vendor and its agents) (Hereinafter, "Vendor
Data") to TIPS. Vendor understands and agrees that TIPS is a government entity subject to public information laws including but not
limited to Texas Government Code (TGC) Chapter 552. Vendor agrees that regardless of confidentiality designations herein, Vendor's
submission of a proposal constitutes Vendor's consent to the disclosure and release of Vendor's Data and comprehensive proposal,
including any information deemed confidential or proprietary herein, to and by TIPS Members.
Notwithstanding the foregoing permissible release to TIPS Members, if Vendor considers any portion of Vendor's proposal to be
otherwise confidential and not subject to public disclosure pursuant to public information laws, including but not limited to TGC Chapter
552, Vendor must properly execute Option I only below, attach to this PDF all documents and information that Vendor deems
confidential, and upload the consolidated documentation. Regardless of the Option selected below, this form must be completed and
uploaded to the "Response Attachments" section of the eBid System entitled "Required Confidentiality Claim Form." Execution and
submission of this form is the sole indicator of whether Vendor considers any Vendor Data confidential in the event TIPS receives a
request, a Public Information Request, or subpoena. If TIPS receives a request, any responsive documentation not deemed confidential
by you through proper execution of Option I of this form will be automatically released. For information deemed confidential by you
through proper execution of Option i of this form, TIPS will follow procedures of controlling statute(s) regarding withholding that
documentation and shall not be liable for any release of information required by law, including Attorney General opinion or court order.
(VENDOR MUST COMPLETE ONE OF THE TWO OPTIONSAND UPLa4D IN THE EBID SYSTEM)
OPTION I — DESIGNATING CONFIDENTIAL
MATERIALS — YES, VENDOR HAS ATTACHED
CONFIDENTIAL NLITERIALS
(Confirm each bullet point and sign below)
■ Vendor claims some Vendor Data confidential to the extent
permitted by TGC Chapter 552 and other applicable law.
■ Vendor attached to this PDF all potentially confidential
Vendor Data and listed the number of attached pages below.
■ Vendor's authorized signatory has signed below and shall
upload this document in the proper location in the eBid
System.
Vendor agrees that TIPS shall not be liable for any release of
confidential information required by law.
Number of pages attached deemed confidential:
Authorized Signature:
OPTION 2 — WAIVER OF CONFIDENTIALITY — NO,
VENDOR HAS NOT ATTACHED CONFIDENTIAL
MATERIALS
(Confirm each bullet point and sign below)
By signing for Option 2 below, Vendor expressly waives any
confidentiality claim for all Vendor Data submitted in relation
to this proposal and resulting contract. Vendor confirms that
TIPS may freely release Vendor Data submitted in relation to
this proposal or resulting contract to any requestor. Vendor
agrees that TIPS shall not be responsible or liable for any use
or distribution of Vendor Data by TIPS or TIPS Members.
■ Vendor's authorized signatory has signed below and shall
upload this document in the proper location in the eBid
System.
-Vendor agrees that TIPS shall not be liable for any release of
confidential information required by law.
Authorized Si'; nature:
d
VENDOR SUPPLEMENTAL INFORMATION
TIPS permits Vendors to submit supplemental documentation and information ("Vendor Supplemental Information") with their
proposals to display to TIPS Member Customers their qualifications, offerings, and special terms. The following documents are for
marketing and informational purposes only. They are not terms of Vendor's TIPS Contract. If the Vendor Supplemental Information
herein contains any warranties, terms, or conditions, the TIPS Member Customer may review and determine whether or not those are
applicable and acceptable for any TIPS purchase before proceeding. If the Vendor Supplemental Information contains any licenses or
certificates, TIPS encourages the TIPS Member Customer to ensure current accuracy at the time of a TIPS purchase.
Manual
CHUTES
11w
F' -
800 - 9 9 -1214 ;ff,*4L wwmanufacturing.com
Overall
Dimensions Weight
In Length: 92" 1265#
4
z Width: 41"
a
Height: 78"
The standard in cattle handling, the
Beefmaster Squeeze Chute features
easy one-man operation with controls
at the front corner, self -catch head gate,
drop down bars with gravity latches, kick
plates for easy access, quick release side
exit and scale ready.
Overall
Dimensions Weight
C Length: 114" 1390#
4
Width: 41"
x Height: 78"
The Beefmaster XL Straight Squeeze
Chute has all the well -designed features
of the Standard Beefmaster but has
extra length to accommodate larger
animals. Full length sidegates have 5 dual
dropbars with a 19" x 25" opening. Extra
bracing compensates for extra length and
guarantees structural strength thatallows
larger animals to be handled properly.
Opera I I
Dimensions Weight
CD Length: 114" 1390#
J Width: 41"
x
Height: 78"
The Beefmaster XL-ZVG has all the
well -designed features of the Standard
Beefmaster but has extra length to
accommodate 22" rear entry gates on
both sides for Palpating or Al Work.
Make your Beefmaster Squeeze Chute
portable! Quick to set up for travel and
operation, the Beefmaster Yoke Trailer
fits all WW Squeeze Chutes.
M
*Shown with self -catch headgate.
The Seedstock 1100 is a hydraulically
assisted manual squeeze chute which
increases operator squeeze force with
less effort. Every pound of pressure on
the pump applies nine pounds of pressure
on the animal. The spring -loaded release,
resets the chute for the next animal
quickly. Featuring a Heavy Duty Hot Roll
floor for extended life and easy clean
out. Inside chute dimensions operate
from 30" to 12" with absolutely no hand
adjustments necessary regardless of the
animal's size. Palpation door travels with
side squeeze creating afunnel to eliminate
small animal turn -around. Branding doors
swing out and are removable. Lower
access kick panel slides off for access to
underside of the animal.
Overall Inside Working
Dimensions Dimensions
o Length: 159" 139"
c Width: 47" 30"
W
n Height: 92" 73"
41.1 UUT!
Optional Equipment
• Portable Yoke Trailer
• Digital Scale
• Blinders for branding windows
Opera I I
Dimensions Weight
W Length: 132" 1335#
U
c Width: 32"
0
a Freight: 74"
The Producer 640 chute is built to handle
the most demanding conditions smoothly
and quickly. With standard features such
as a palpation cage, bi-fold tailgate, exits
on both sides, a restraining bar and a
ratchet bar side squeeze panel, handling
cattle has never been more efficient. And
the unique flex cutting gate means no
extra overhead space is needed.
The WW Manual Calf Table is designed to
work calves up to 600 pounds. The table
features a headcatch and side squeeze bar
for positive holding of animal. Designed
with exceptional balance, resulting in easy
tilting. A ratchet -driven dally rope on the
rear gate draws the animal's legs back
for easy access, resulting in time -saving,
efficient working of any calves.
Gates have spring -loaded latches for
positive locking in both cross alley and
closed positions. Working area is an ample
32" x 44" size. When reversed, the WW
Palpation Cage is an efficient sorting unit.
An optional Bifold Tailgate door can be
installed on the entrance to the chute.
Easily operated, this door allows for a
wide opening top to bottom.
The unique design of the Beefmaster
Headgate allows the forward motion of
the animal to actually help the operator
secure the animal in the working position.
Full length opening allows the animal to
stand relaxed with no danger of choking.
Neck and nose bars are available as an
option to quickly and safely secure the
animal's head. The headgate is U tall.
The heavy-duty Manual Headgate
provides reliable performance and
functions. The Manual Headgate closes
to 4 inches for catching small calves, and
opens to 30 inches.
I
4
i
,i
Of
151 ' t
i'
w
ckv * I vk �_x
LIVESTUL'K SYSTEMS
ALL CONTROLS ON FRONT CORNER OF
CHUTE FOR ONE-MAN OPERATION.
RETRACTABLE SQUEEZE ARM ALLOWS
SAFE, UNRESTRICTED, MOVEMENT
AROUND CHUTE BY OPERATOR.
STEEL CABLES SYNCHRONIZE HEADGATE
MOVEMENT WITH 180 DEGREE SWING.
HINGED DROPBARS ON BOTH SIDES OF
WITH FOOLPROOF GRAVITY LATCHES.
STEEL FLOOR WITH FLOOR CLEATS FOR
SURE FOOTING.
STER
SQUEEZE CHUTES
il6lb
rmf
cr-m
V r
I
Beef master Standard 2311-1 t 1-000
The standard in cattle handling, the Beef master Squeeze Chute features easy one-man
operation with controls at the front corner, self -catch head gate, drop down bars with
gravity latches, kick plates for easy access, quick release side exit and scale ready.
BEEFMASTER STANDARD SPECIFICATIONS
Length 92"
Width 41"
Height 78"
Weight 1265#
Beef master xl straight 231I-21 1-000
The Beefmaster XL Straight Squeeze Chute has all the well -designed features of the
Standard Beefmaster hat has extra length to accommodate larger animals. Full length
sidegates have 5 dual dropbors with a 19" x 25" opening. Extra bracing compensates
for extra length cad guarantees structural strength that allows larger animals to he
handled properly.
BEMASTER XL STRAIGHT SPECIFICATIONS
Length
114"
Width
411,
Height
In-,
Weight
11M#
IF
Hot -Dip Galvanization
All Beefmaster Squeeze Chutes have the option la be
Hot -Dip Galvanized for maximum long lasting rust
resistance. Perfect for wetter or humid climates.
BEEFMASTER SQUEEZE CHUTES
Beef master XL-2VG 2311-311-000
The Beefmaster XL-2VG has all the well -designed features of the Standard Beef master
but has extra length to occommodale 22" rear entry gates an both sides for Palpating
or Al Work.
Length
Width
Height
Weight
BEEFMASTER XL-2VG SPECIFICATIONS
114"
0
t344#
Palpation Cage 2364-001-000
Gales have spring -loaded latches for positive locking
in bolh crass alley and closed positions. Working area
is an ample 32" x 44" size. When reversed, the WW
Palpation Cage is an efficient sorting unit.
New Adjustable Palpation Cage
2364-004-000
Safety aad accessibility, the adjustable Polp Cage offers all
the options veterinarians and stockman desire.
W AL
Beefmaster Headgate
2321-01 1-000
The unique design of the Beefmoster Headgate allows
the forward motion of the animal to actually help the
operator secure the animal in the working position. Full
length opening allows the animal to stand relaxed with
no danger of choking. Neck and nose bars are available
as an option to quickly and safely secure the animal's
head. Headgate is 6' tall.
Neck and Nose Bar
2321-001-000 neck
2321-013-000 nose
Optional Neck and Nose Bars
quickly and safely secure the
animal's head for de -horning,
togging, vaccinations and treating
pinkeye. Easily attaches to the
headgate and swings out of the
way when not in use.
Beefmaster Bifold Tailgate
2322-041-000
An optional Bifold Tailgate door can be installed on the
entrance to the chute. Easily operated, this door allows
for a wide opening top to bottom.
ACCESSORIES
Scissor Headgate
2321-021-000
A full width no obstruction headgate that allows
operators to work cattle calmly and efficiently
while eliminating the risk of injury. Suitable for
horned rattle, the solid sheeted panels and no
bottom cross bar focus the animal's view to the
opening for consistent forward motion. The short
stroke control handle provides the operator
effartless control with the quick response needed to
capture problem animals. The WW Scissor
Headgate is fully interchangeable with the
Beefmaster Headgate.
aigi-Star
Weighing System
SW4600EID Indicotor
This advanced management indicator allows
for both EID and Visual ID input with
customizable display offering easy data
collection.
SW7000-40", 7000 Cap.
This rugged weigh beam is designed to place
under manual squeeze chutes. It is easy to
install. Na level ingadjustments necessary —
just secure it. Unique design is accurate
even on mild slopes.
Beefmaster Yoke Trailer
2342- 7 00-100
Make your Beefmaster Squeeze Chute portable! Quick to set
up for travel and operation, the Beefmaster Yoke Trailer fits
all WW Squeeze Chutes. _
rHE
E INE
QU
EQUIPMENT
WW Livestock has developed the ultimate equine equipment, providing perfect solutions for training
at home or for travel during competition. durable and dependable, each piece is professionally
designed for you and your equine partner.
PANELS & GATES
ROUND PENS
63rl4 V
TACK-N-GO TM SADDLE RACK
ROPING CHUTES
�abo-
uun"�-may
rNe
Panels & Gates
WW Livestock has developed multiple lines of premium panels and gates. Components
from ALL series are compatible with each other and have the same ouIsla nding features.
Spring -activated gate latches and 2" standard pipe hinges give WW gates trouble -free
service. All WW panel and gate joints are saddle cut for extra strength.
'Request a Panels & Gates literature Sheet for a full list of options and sires.
5ts- �~ • � � 'j i
SS r�
Choose from your choice of powder coat colors for a small tip charge.
Round Pens
9
Classic Panels
3311-508-000 Classic 8' Pane!
3311.510.000 Classic 10' Panel
3311-512-000 Classic 12' Panel
4
i
.,N,,,�,,,.,",.. ,
Classic High Pole Gates
3314-508-096 Classic 8' Nigh Pale Gate 9'6"
3314.510.096 Classic l0' High Pole Gate 9'6"
3314-512-096 Classic 12' High Pole Gale 9'6"
M
Chaparral Panels Chaparral High Pole Gates
3341-606-000 Chaparral 8' Panel 3344-608-096 Chaparral 6' High Pole Gale 9'6"
3341.610.000 Chaparral 10' Pane! 3344-610.096 Chaparral W Nigh Pole Gate 96"
3341-612-000 Chaparral 12' Panel 3344-612-096 Chaparral 12' Nigh Pale Gate 96"
Riato Series
The RIATA series of gales and panels are designed specifically for the equine industry, but also make a
great utility pen for cattle. All components are fabricaled of 16 gauge 1.66 tubing and are 5T tall.
Riata Panels Riato 6' Round Pen Gate
3381-508-000 Riota 6' Panel 3382-072-000
3381.510.000 Riata 10'Panel
3381-512-000 Riata 12' Panel
I - ---
ig-
-_- -
Chaparral Deluxe Round Pens
Chaparral round pens are tapered to minimize chance of injury to the rider by being crowded
into the perimeter fence. They are available with a choice of lumber or steel in the lower 24",
and include a spring loaded horse back gate latch, a gate frame with 9' overhead clearance,
and interlocking panels with self-contained pins.
Chaparral Deluxe (less lumber) Chaparral Deluxe (Sheet metal gonom)
4390.050-000 Chaparral 50' Deluxe 4390.050.000 Chaparral 50' Deluxe
4390-050-200 Chaparral 60' Deluxe 4390.050.200 Chaparral 60' Deluxe
EQUINE EQUIPMENT
Stalls & Housing
Classic Stalls
Classic Stall fronts feature 48" Rolling Doors that roll smoothly and quietly on rust -free Celcon cannonball
wheels. Fronts and Divider are available in 10' or 12' lengths. Self-conlained Drop Pins connect all
components. Vertical Board Channels are designed to receive 2" tongue and groove lumber in fronts and
dividers. Oplional Swing -out Feeders and Dutch Doors Available.
Classic 10' Stall Components Classic 12r Stall Components
4321.110.000 Classic 10' Stall Fran► 4321-112-000 Classic 12' Stall Front
4322-210-000 Classic 10' Vertical Roil Divider 4322-212-000 Classic 12' Vertical Roil Divider
4322.310.000 Classic 10' Solid Divider 4322-312-000 Classic 12' Solid Divider
4320.000.000 Classic Starter Post 4320-000-000 Classic Starter Post
Champion Stalls
All Champion fronts and Dividers are available in your choice of 10' or 12' lengths. Champion Stall
Components connect with self -co ntoined pins and corresponding clips. Fronts feature doors that roll quietly
and smoothly on rust -free cannonball wheels that never need lubricating. Fronts include feed doors with
optional swing -out hay and grain feeders available. Available in Powder Coat or Galvanized Finish
Champion 10' Stall Components Champion 12' Stall Components
4331-210-000 Champion 10' Stall Front 4331.212.000 Champion 12' Stall Front
4332.210.060 Champion 10' Vertical Rail Divider 4332-212-000 Champion 12` vertical Rail Divider
4332-310-000 Champion 10' Solid Divider 4332-312-000 Champion 12' Solid Divider
4330-001-000 Champion Starter Post 4330.001.000 Champion Starter Post
Equine Housing
Add a WWTruss System at any time without any additional adapters and turn your stalls imto a beautiful barn
with a breezeway or a functional Shed Row Burn. Breezeway Doors and Girt Clips available as options if you
want to make your barn even more functional.
Truss Components
All Trusses work on Clossic and Champion 51alls ar Oassic haels
4361-104.000 Classic Shed Row Truss 10'
4361-124-000 Classic Shed Row Truss 12'
'All Shed Row Trusses Dove a 4' averhang
4362-115.000 Classic Building Truss 10' Female
4362-215-000 Classic Building Truss 10' Mole
'Classic 10' Ruildmg Trusses are designed for a Id' alley
4362-126.000 Clossic Building Truss 12' Female
4362-226-000 Classic Building Truss 12' Mole
'Classic 12' building Trusses are designed far a 12' alley
Barn Breezeway Doors
4369-110-000 Breezeway Door 10' Solid {Wood Fill]
4368.112-000 Breezeway Door 12' Solid (Wood Fill)
4366-210-000 Breezeway Door 10' Solid {Sheet Metal)
4368-212-000 Breezeway Door 12' Solid (Sheet Metal)
7•
VW W ter.;
TACK-N-GO'" Saddle Rack
The TACK-N-GO'm portable folding saddle rack is the professional's choice for
keeping saddles and equipment handy in any location. The ultimate accessory for
the arena, barn, round pen, trailer or stall area, this simple, heavy-duty, folding
saddle rock will stand up to hard use and heavy saddles anywhere you use it.
Comes with everything you need!
Foldable TACK-N-GO'"' in Black or Pink
• Hanging Brackets for Panels, Fences and Stalk
Bolts for Attaching Hanging Brackets
- Heavy Wood Screws for Wall Installation
TACK-N-GG'"' Saddle Rack
4340-000-100 TACIT-N-60I Saddle Rack Black
4340-000-101 TACIT-N-GO'M Saddle Nark Pink
Roping Chutes
Rodeo Roping Chute 5310-000-000
- Meets or exceeds all professional association rules and
specifications. (The actual roping chute used to write
the specs).
• Combination steer and calf chute.
• Heck -rope windows to allow for easy access for harrier
equipment and increased production speeds.
Extra length (84 �12" from barrier eyes to rear of
chute) which allows room for "pusher" without
leaving tailgate open.
• Trigger latch for fast, easy, quiet operation.
Can be operated from ground or horseback.
Built heavier and stronger than most brands oa the
market today.
... Our Designing Staff works with
professional cowboys on a daily basis
in order to provide the Rodeo
Industry with the most efficient
equipment available.
EQUINE EQUIPMENT
J.AC*J11j#Z*OO
_3W ' Saddle Rack
t
Team Roping Chute 5310.000.025
• 1 ft. shorter in length than rodeo model so no
"pusher" is needed.
The some heavy-duty construction as the
Rodeo Roping Chute.
Rini Roping Chute 5310-000-050
Scaled dawn to fit tie -down and breakaway
roping animals.
Tapered sheet metal bottom to prevent
animals from turning around.
Ne
k-xvv—&WW�
LIVES'1`[]CK SYSTEMS
f �
M
EXPRESS L
TABL�CORRA�,�IL ,
6' Panels are fabricated from 2" 14 ga. high tensile
pregalvanized steel tubing
All gates are spring -loaded or come equipped with
spring -loaded plungers and strike plates
10' Gate in the main frame of the corral allows driving
through with a full size pick up
Optional Mounted Headgate for alley allows working
cattle in the field
Includes 6 Man Pass Gates, and 2 High Pole Gates
Hinge and Collar System allows set up on uneven terrain
Solar Charging System (optional battery upgrade for colder climates)
Heavy -Duty Selector Valve and Sealed Switch
Option for Interchangeable Gooseneck or Bumper Pull
Integrated Trailer Lights and High Speed Highway Hubs
Available with Vinyl or Bull Sheet
Standard Corral can he upgraded to a +3 or a +6
Lf�I .Yili ......I��� hil it J�►�1 s'i
IDLY 41R QQ
L
Easy One -Man Setup
Wheels on each panel provide easy one-man setup, even on rough terrain. Pre -galvanized tubing construction offers years of hassle -free service no matter how rough
the working conditions. Available is standard and larger units the Express Portable Corral provides catch capahilities from 100 to 300 head. Easily incarparate a WW
Squeeze Chute and Yoke Trailer for a completely mobile full service handling system that is fast to set up and ready to go to work!
Unchain panels and simply pull out.
Extend, then separate and roll next panel.
Repeat procedure an opposite side. Within 10 minutes you're finished!
Pull and roll next three panels from frame.
Push from inside out and let the wheels do the work.
Onfokl last panel and ro!1 around to connect to first pane!.
EXPRESS PORTABLE CORRAL
Express Portable Corral Options
Express Portable Corral -
Standard
1880-100-000
WW Express Portable Corral Standard provides the pen
capacity to efficiently work 80 to 100 head of collie.
Designed and built with quality and features that will serve
your operation for many years to come.
Express Portable Corral -
Plus 3
1880-100-003
The WW Express Portable Corral Standard Pius 3 option is
designed with 3 additional panels and the some ease of setup
to allow for a working capacity of 160 to 200 head.
Express Portable Corral -
Plus 5
1880-100-006
More than double the capacity of the WW Express Portable
Corral Standard with the Plus 6 option. This system enables
the cattleman to handle 250 to 300 head!
r
Express Portable Corral Accessories
Available with
Durable Bull Sheet or Vinyl
WW Express Corals have the option of Bull Sheet or Vinyl Sheeting on the center
alley to help keep cattle flowing calmly and quietly by reducing distractions. Bull
Sheet is made from High -density polyethylene (HDPE) known for its pliability,
durability and strength. Resistant to moisture, bacteria and insects with a high
impact strength make Bull Sheet the ultimate choice in your systems. Bull Sheet is
also available separately to add to your existing equipment.
rMtirF�
£ R
EXPRESS POR rA BL E CORRAL
tz-
Integrated Trailer Lights
& High Speed Highway Hubs
WW Express Portable Corrals are rood ready with high
speed highway hubs and completely wired with trailer
lighting and plug.
._10001"
Optional Quick Change Gooseneck
or Bumper Pull Hitches
Tow it by bumper pull or gooseneck, every WW Express Corral comes ready to accept
either hitch allowing for versatility. Hitches are quick and easy to attach and remove,
change from bumper pull to a gooseneck in a few minutes!
rNe
LIVEST[)CI{ SVs"1'1 Xls
lk
_ _ w
-ram'
twMalamm mom
r.�' '•'�Ir'M i
It
800-999-1214
www.wwmanufacturing.com
W W,!AIAV W
NOS & SHEEP PENS
Hog & Sheep Panels & Gates
BEST VALUE ON THE MARKET PER POUND
• All Hog & Sheep panels and gates are available 41 " and 48" tall-
• All gates have a 7' frame.
■ All components are constructed from A-513 High Tensile steel tubing with 50,000 PSI yield strength.
■ All units are fabricated of 1 'h" 14 and 16 gauge steel, with a durable, attractive, long-lasting gray powder coat finish -
All joints are saddle cut for maximum strength.
■ All units interlock with self-contained permanently attached drop pins. Gate latch also consists of self-contained drop pin.
• Available with Pre -Galvanization, or Hot -Dipped Galvanization for areas with a more corrosive environment.
■ Panels and gates can be configured to fit any set up or design -
Custom design available.
Available with 3" Goat spacing or 4-3/16" spocinp.
41" Hog & Sheep Pane Is & Gates
Hog & Sheep Panels 4' Pin -Clip 41" Tall 8311-204.000
Hog & Sheep Panels 5' Pin -Clip 41" Tall 8311-205.000
Hog & Sheep Panels 6' Pin- Clip 41" Tall 8371.206.000
Hog & Sheep Panels 8' Fin- Clip 41" Tall 8311.208-000
Hog & Sheep Panels 10' Pin- Clip 41'Tall 8311-210-000
Hog & Sheep Panels 12' Pin- {lip 41" Tall 8311-210-000
Hog & Sheep 4' Gate Pin -Pin 41" Tall 8314.104-000
Hag & Sheep 5' Gote Pin -Pin 41" Tall 8314.105-000
Hog & Sheep 6' Gate Pin -Pin 41 " Tall 8314.106-000
48" Hog & Sheep Panels & Gates
Hog & Sheep Panels 4' Pin -Clip 48" Tall 8311-204-900
Hog & Sheep Panels 5' Pin -Clip 48" Tall 8311.205-900
Hog & Sheep Panels 6' Pin- Clip 48" Tall 6311-206-900
Hog & Sheep Panels 8' Pin- Clip 48" Tall 8311-208-900
Hog & Sheep Panels 10' Pin- [lip 48" Tall 8311-210-900
Hog & Sheep Panels 12' Pin- {lip 48" Toll 8311.212.900
Hag & Sheep 4' Gate Pin -Pin 48" Toll 8314.104.900
Hog & Sheep 5' Gate Pin -Pin 48" Tall 8314-105.900
Hog & Sheep 6' Gate Pin -Pin 48" Tall 8314-104-900
Rodeo Arenas
v
BOCK BOTTOMS
Grounding Your Event Without The Labor
Portable Stalls
Cattle Tie Panels
PORTABLE I EASY SETUP & TEAR DOWN I TIME SAVING
■ Substantially Reduce Labor Needs
• Movable With Forklift
• Transportable For Easy Storage
• Self Standing For Setup & Tea rdown
• Interchangeable Panels
• Removable End Caps
• Safe Secure Pins
■ No Hales In Floor To Keep {lean & Open
■ Rock Bottom Bases Completely Covered by Bedding
■ Set Up On Any Flat Surface
■ Set Up In Multiple Configurations
Rock Bottom Bases
Size - 10'0 2"0 2"
@ 1,000+ Pounds
All portable stall components are
constructed from A-513 high tensile
steel tubing with 50,000 PSI yield
strength. All joints on framework lure
saddle cut for maximum strength. All
units interlock with self—contained,
permanently attached drop pins. All
units are 6' 10--1/2" tall and
available in 10' or 12' lengths. 48"
doors are secured with spring loaded
latches. Lower part of stalls includes
3/4" 38 Plyform inserts. All units
feature an attractive I o n g lasting gray
powder coat finish.
ANY Building Can Now
Be A Cattle Tie Barn
All the stall components are
constructed from 1.5° x 14 gunge
high tensile steel tubing with
50,000 PSI yield strength. All
joints are saddle cut for maximum
strength. Tie stall frame and Alley
Control frame height is 84". Top
interior rail of panel is 48" high
with 40" tie positions. Units
interlock with self—contained
permanently attached drop pins.
All units painted with attractive
long lasting gray powder coat.
L S
Small Animal Scales
58SX HOG AND SHEEP CRATE SCALE 7311-002-000
PICTURED WITH OPTIONAL WHEEL KIT
• 500 lb. Single Animal Livestock Scale
■ Mechanical Beam w11 lb. Graduations
The Paul Scales Hag and Sheep Crate Scale has set the standard of performance for portable scales for many, many years. The
New and Improved WW-Paul Model 58SX still retains all of the time proven Paul Stales features and now also includes the new
Side Slide, Bi-Fold Gate design for faster and easier operation. Since there are no heavy gates to lift, the 58SX con be operated
by almost anyone, including children- The Model 58SX is easily retrofitted with an Electronic Load Cell, Readout Indicator and
Ticket or Tape Printer if desired. The simple but rugged design combined with heavy duty steel construction guarantees you an
accurate and dependable scale that you can count on for many years to come.
70SX HOG AND SHEEP CRATE SCALE 7311-Q1Q-000
• 700 lb. Single Animal Livestock Scale
• Mechanical Beam w/l lb. Graduations
This Scale has all of the Paul Scale traits; Accuracy, Durability and Reliability. A new side Slide, Bi-Fold Gate Design makes for simple and
fast operation. Since there are no heavy gates to lift, the Model 70SX can be operated by almost anyone, including children. The all steel
holding crate is equipped with a galvanized woven wire floor and steel cleats for longer life and easier cleaning. The Model 70SX is easily
retrofitted with an Electrank Load Cell, Readout Indicator and a Ticket or Tape Printer if desired. It is designed for the professional or
commercial pork producers who demand ruggedness in their equipment.
LFT 7005 HOG AND SHEEP CRATE SCALE
• 700 lb. Cap. x l lb. Div. Single Animal Livestock Scale
This stale uses out field-tested and proven mechanical tarque-bar suspension, combined with our state-of-the-art electronics package. The
accuracy and dependability of this scale is unsurpassed in Way's animal scale market. The new side slide gate design makes for simple
and fast operation. The simple but rugged design combined with heavy duty steel construction guarantee you an accurate and dependable
scale hat you can count on for many years to come.
Weight Indicators
IQ+390DC DIGITAL LIVESTOCK
WEIGHT INDICATOR MANAGEMENT SYSTEM
Featuring DC operation, a huge one -inch, The WW-Paul Scales Model 10+710 Indicator con display and stare up to 800 animal weights and their
6-digital LCD display, and a stainless steel respective ID numbers. The ID`s can be keyed in on the indicator key pad a scanned in with an Electronic
HEMA 4X/1P66 enclosure, the I0+390-DC Identification (EID) system. This data can then be down -loaded from the 10+710 to a desktop, lap -top or
Indicator delivers heavy duty performance hand-held computer for analysis. There are a number of companies and systems that offer different types
at a reasonable price. of software programs for livestock and show animal management.
THE
No
W-W MANUFACTURING INTRODUCES THE HD EZ-LIFTTm AS THE
_ SAFEST WAY TO LOAD, TRANSPORT AND UNLOAD HEAVY ITEMS
WITH THE USE OF A HYDRAULIC HAY BALE BED.
l y
—' This product was designed to eliminate the need for ramps, driving at an incline/decline, and
dismounting the recreation vehicle on a trailer or truck bed. All loading and unloading takes place
at the ground level and the hydraulic hay bale bed arms do all of the heavy lifting while the user is
safe on the ground. While it is primarily used to transport ATVs, you can place anything that will
safely ride on the HD EZ-LIFT". We have seen people place tools, fencing supplies, equipment,
livestock feed, mineral tubs for cattle, and lumber on the HD EZ-LIFTT". The possibilities are truly
endless! No more lifting heavy items to place on your flat bed, simply slide it on the HD EZ-LIFTT"
and let the bale bed arms pick it up to place on the bed.
OVERALL DIMENSIONS
• 75" Long
• 71"Wide
• 321 /2" Tall
LOADING DIMENSIONS
• Up to 60" Wide
• Up to 60" Wheelbase Length
EANDEUSEDFDR
7.ANDEUSEDOV
FARMERS
•
ATV
RANCHERS
•
SMALL UTV
• SEARCH AND RESCUE
•
GOLF CART
• FIRE DEPARTMENT
•
SNOWMOBILE
• HUNTERS
•
MOTORCYCLES
• FISHING
•
DUNE BUGGY
• OFF -ROAD ENTHUSIASTS
•
GO KART
• GAME WARDENS
•
RIDING LAWNMOWERS
• FORESTRY SERVICE
•
TOOLS
• PARK RANGER
•
EQUIPMENT
• OIL AND GAS INDUSTRY
•
FENCING
• GOLFERS
•
SUPPLIES
•
LIVESTOCK FEED
Patent Pending
MINERAL TUBS
r19'"
WMA01j
LrNS&
ckvv�&kvv'�A_
_._-I`_ - - 4xv,
HG HAY FEEDER
HG Hay Feeder
• Research shows that the bell shape design
will cut waste by up to 70% over
conventional feeders.
• Open bottom for better air flow that allows
hay to dry.
• No equipment needed to put hay into feeder.
• Solid one piece construction for increased
durability.
• 8' diameter allows feeder to fit almost ony
bale size.
• Constructed with V square tubing and
weighs 160 lbs.
• Manufactured with Pro -Galvanized tubing
for extended life.
ckvlrA-qww v
LIVEST"CI{ SYSTEMS
1?1
ALL CONTROL ARMS AND CENTER SQUEEZE BARS
EQUIPPED WITH SEALED PILLOW -BLOCK BEARINGS.
FOLD DOWN BARS SADDLE CUT FOR EXTRA
STRENGTH WITH SPRING LOADED LATCHES.
ALL BEARINGS EQUIPPED WITH GREASE ZERKS
FOR EASY MAINTENANCE.
ALL CHUTES FEATURE EMERGENCY SIDE EXIT
SIDE DROP DOOR LATCH LOCATED IN CENTER OF
DROP DOOR ACTIVATES LATCHES SIMULTANEOUSLY
PRESSURE GAUGE ON ALL UNITS REDUCE
POSSIBILITY OF INJURY TO ANIMALS.
SUPER QUIET HYDRAULIC SYSTEM GREATLY
REDUCES POSSIBILITY OF "NOISE PANIC".
r
rr�e��
rAW
■ nip r� ,ir.3 ��Fil.y :���.� d3 i Ji►1 ��
RANCHMASTER
Length:101'
Height: 96"
Width: 83"
Dropbars: 25"
■ Nylon bushings on headgate and tailgate.
• Hydraulic adjustment of lower sides.
■ Center bar is 2" solid steel shaft with sealed bearings.
• Nylon wear plates on headgate.
■ Emergency side exit.
RANCHMASTER 2VG
Length:137'
Height: 96"
Width: 83"
Dropbors: 25"
Pulp Door: 32" Opening
■ Nylon bushings on headgate and tailgate.
■ Hydraulic adjustment of lower sides.
■ Center bar is 2" solid steel shaft with sealed bearings.
• Nylon wear plates on headgate.
■ Emergency side exit.
HYDRAULIC CALF TABLE
■ Will work calves up to 500 lbs.
■ Available in Left or Right Hand Brand
■ Easily transported on a standard W-W yoke trailer
• Power unit sold separately.
HYDRAULIC CHUTES
SUPER PRO
Length: 101"
Height: 96'
Width: 8r
Dropbars: 25'
• Super Sized" materials including 31/2' heavy wall frame and 2112" heavy wall sides.
• UHMW bushings at gote honoms.
• Hydraulic bottom adjustment.
• Headgate extensions
• Double wear plates on all gates.
• The stoutest chute in the iadustry designed specifically to withstand abuse sustained from feedlot
processing and re -implanting.
BULLMASTER
length:117"
Height:104'
Width: 09'
Drophars: 31 "
■ Nylon bushings on bottom of headgate and tailgate.
• Hydraulic adjustment of lower side.
• Headgate extension.
• Emergency side exit.
■ The biggest chute on the market designed to work the largest breeds in the beef industry.
CUSTOM CHUTES AVAILABLE
V�&-kvw�
orw
OPTIONAL EQUIPMENT
• Hydraulic Head Bender
• Hydraulic Neck Bar
• Hydraulic Head Roller
• Hydraulic Leg Puller
• 3/4" Hot Roil Floor
• Head Gate Extensions -Weld On or Bolt On
• Gate Guards
• Dual Controls
• Dual Cylinders on Gates
• Yoke Trailer
• Palpation Cage
• Palpation Door
• Full Drop Door
• Split Drop Door
• Separate Unit
■ Gas Powered Unit
• Single Drop Bars
• lip Chute Assembly
• Two Piece Fall Out Floor
• Head Rest
• "New` Adjustable Gate Feet
• Louvers
• Commercial Tubs
• Bifold Headgate and Tailgate
• 50/50 Milk Door
Hydraulic Head Bender
Louvers
Palpation Cage
�14" Hot ✓zoll Floor
Pip Chute Assembly
Two Piece fall Out Fkor a
Yoke Trailer
ACCESSORIES
Hydraulic Neck Bar
Hydraulic Gate Guard
50150 Milk door
I� !Age
C
Adjustable Tollgate Gate Feet
THr.
}
Panel Base
Length: 10'
Width: 12"
Height: 12"
Empty weight:
Filled weight:
• Holes punched in angle iron to stake
down to ground
45 degree cut on angle allow for bases
to connect at 90 degrees
Forklift pockets off ground to allow
for easier fork placement and allow
for multiple base lifting
• tan be ordered filled or unfilled to
help with shipping casts
• Retaining tabs to allow panels to be
anchored to base
• Can he built in multiple lengths
■ Works with W-W arena panels and
W-W cattle ties
kkr'pd QOV°LYA
+ � 4
i
�R o
CWOIV�M V�
FWqTW-1V'---_MVrY T'=V
Ell"
DANELS& GATE
WW Livestock has developed multiple lines of premium panels and gates. Components from ALL series
are compatiblewit h each ether and have the same outstanding features. Spring -activated gate latches
and 2" standard pipe hinges give WW gates trouble -free service. All WW panel and gate joints are
saddle cut for extra strength. Choose a long lasting, attractive, gunmetal gray powder coat finish,
pre -galvanized or hat dipped galvanized.
CLASSIC SERIES
CHAPARRAL SERIES
IW.1so] 1;119;1►1a161
RIATA SERIES
EXPRESS PANEL TRANSPORT
i V a r` �I� �Idi� � :1�� �� i rli►1 Asa
lqf�_ -IT4
r
THe��
_f.
CWWAV4 A" V �
LIVEST(DOCU SYSTEMS
Classic Series
Classic Panels and Gates have long been the standard for competition to live up to in the Livestock Equipment Industry. These are the Gates and Panels which prestigious organizations such
as the OR depend on year after year. All components are fabricated of 2" high tensile 14 gauge tubing with 50,000 P5.1 yield strength. Panels are 5' tall and mount 6' high on dossic post.
Classic Panels
3311.502-000 Classic 2' Panel
3311.503-000 Classic 3' Panel I
3311-504-000 Ciossir 4' Panel
�, Classic Panels -Full Sheeted
3311.506-000 Classic 6' Panel
3311-508-200
3311-508-000 Classic 8' Panel
Classic 8' Panel Full Sheeted
]
3311.510-000 Classic 10' Panel
3311-510.200
3311.512-000 Classic 12' Panel i
I
Classic 10' Panel Fall Sheeted
3311-514-000 Classic 14'Paael
3311.516-000 Classic 16' Ponei
-
Classic Panels -Half Sheeted
Cla55ic Gate Panels
3311-508-100
3315-S08-000 Classic 8' Gate Parcel (64)
Classic 8' Panel Half Sheeted
3315-510-000 Classic 10' Gate Panel (G4)
3311-510.100
3315-512-000 Classic 12' Gate Panel (64)
Classic 10' Panel Half Sheeted
W Classic Gate -in -Frame
3312-024-000 Classic 24" Gate -in -frame
3312-036.000 Classic 36" Gate -in -Frame
Classic Corral Gates
3312-048-000 Classic 48" Gale -in -Frame
3316-510-000 Classic 14' Corral Gate
l 7 3312-060.000 Classic 60" Gate -in -Frame
3316-512.000 Classic 12' Corral Gate
3312-072.000 Classic 72" Gale -in -Frame
3316-514-000 Classic 14' Corral Gate
3312-064-000 Classic 84" Gale -in -Frame
3316-516.000 Classic 16' Corral Gate
3312-060.100 Classic 60" Gale -in -Frame Half Sheeted
I 3312-060-200 Classic 60" Gate -in -Frame Full Sheered
Classic High Pole Gates
3314-508.078 Classic 8' High Pole Gate 7'8" tall
3314-508.096 Classic 8' High Pale Gate 9'6" Tall
3314-510-078 Classic 10' High Pale Gate 1'8" TO
Classic 32
Classic 32
3314-510.096 Classic 10' High Pole Gate 9'6"Tall
Alley Control
Alley Control
3314-512.078 Classic 12' High Pole Gale 7'8" Tall
frame
Gate
_ 3314-512.096 Classic 12' High Pole Gate 9'6"TO
3313-032.000 3313-132-000
Classic Connecting Posts Classic Spreader Posts
+ Classic Panel Mounting Brackets
3318-100-000 Classic 1-Way Conneding Posl 6' 3318-200-078 Classic 2-way Spreader Past 7'8"
3319-100-000 Classic Panel daunting Bracket w/Clips
3318.200-000 Classic 2-Way Connecting Past 6' 3319-300.078 Classic 3-way Spreader Post 7'8"
1
3319-101-000 Classic Panel daunting Bracket Oins left
3318.290-000 Classic 2-Way 90 degree connecting Post 6' 3318-200.096 Classic 2-Way Spreader Past 9'6"
3319.102-000 Classic Panel Mounting Bracket w/Pins Right
3318-300-000 Classic 3-Way Connecting Post 6' 3316-300-096 Classic 3-Way Spreader Past 9'6"
3318.400-000 Classic 4-Way Connecting Past 6'
1.
3331.100-108 Classic 8' Spreader Bar Tap
3331.100-208 Classir 8' Spreader bar Bottom
Classic Spreader Bar 3331.101-000 Classic 10' Spreader Stir Top Classic Spreader Bar 3331.102-000 Classic ]0' Spreader bar Bottom
Top 3331-201-000 Classic 12' Spreader 6ar Top Bottom
3331-202-000 Classic 12' Spreader bar Bottom
PANELS & GATES
Chaparral Series
Chaparral Panels and Gales are tons#rutted from 1.9" high tensile 16 gouge tubing with 50,000 PS]. yield strength. In keeping with the quality that WW demands from all its products,
the Chaparral Series has that extra toughness that insures dependability when working cattle. All components feature self-contained connecting pins for easy interlocking.
f
r
Chaparral Panels
3341.602-400 Chaparral 6' x 74" Panel
3341.604-000 Chaparral 6' x 4' Panel
3341-606-000 Chaporrol 6' x 6' Panel
3341.608-000 Chaparral 6' x 8' Panel
3341.610.000 Chaparral 6' x 10' Panel
3341-612-000 Chaporral 6' x 12' Panel
3341.614-000 Chaparral 6' x 14' Panel
3341-616-000 Chaparral 6' x 16' Panel
Chaparral Gate Panels
3345-608-000
Chaparral 8' Gale Panel (64)
•r
3345.610.000
Chaparral 10' Gate Parcel (G4)
3345.612.000
Chaparral 12' Gate Panel (G4)
I
r Chaparral Gate -in -Frame
3342.036-000 Chaparral3' Gale -in -Frame
3342-048-000 Chaparral 4' Gaie-in-Frame
3342.060-000 Chaparral 5' Gate -in -Frame I
3342.072-000 Chaparral 6' Gate -in -Frame
Chaparral Panels with Regs
• 3341.602-400 Chaparral 6' x 2'4" Panel w/J-Leg
3341-604-000 Chaparral 6' x 4' Panel wlReg
3341-606-000 Chaparral 6' x 6' Panel 04eg
3341.608-000 Chaparral 6' x 8' Panel w/J-Log
3341-610-000 Chaparral 6' x 10' Panel w/J-Leg
' 3341.612-000 Chaparral 6' x 12' Panel w/J-Leg
3341.614-000 Chaparral 6' x 14' Panel w/J-Leg
3341-616-000 Chaparral 6' x 16' Panel w/J-Leg
Lariat Panels
i�
'I
Chaparral28' Chaparral28"'
Alley Control , Alley Control
Frame Gate
3343-028-000 3343- � 28-000
Chaparral Corral Gates
3346.506-000
Chaparral 6' Corral Gate
3346.508.000
Chaparral 8' Corral Gate
3346-510-000
Chaparral 10' Corral Gale
3346-512.000
Chaparral 12' Corral Gate
3346.514-000
Chaparral 14' Corral Gate
3346-516-000
Chaparral ld' Corral Gate
Chaparral High Pole Gates
3344-608-076
Chaparral 8' High Pale Gate 71"
3344.608.096
Chaparral 8' High Pale Gale 9'6"
3344-610-076
Chaparral 10' High Pole Gate 7'8"
3344-610-096
Chaparral 10' High Pole Gale 9'6"
3344.612.078
Chaparral 12' High Pale Gate 18"
3344-612.096
Chaparral 12' High Pole Gate 9'6"
I Chaparral Starter Post
j 3341-000-000
Lariat Panels are posture panels designed for portability and
ease of handling. fabricated of 16 gouge 1.5' lubing and 5' tall-
3361-510-000
" lariat 10, Panel
Spring Activated Gate
latches provide years
of trouhle free service.
CkVVAVV&kV,,FAVV_
M AL
Riata Series
The RfATA series of gates and panels are designed specifically for the equine
industry, but also make a great utility pen far cottle. All components are fabricated
of 16 gauge 1.66 tubing 54" tall.
PANELS & GA TES
Riato 6' Round Pen Gate
3382-072.000
Riata Panels
3381.508-000 Riato 8' Parcel
3381-510-000 Riato 10, Panel
3381.512-000 Riato 12' Ponel
Express Panel Transport
With the new Express Panel Transport, you'll want to move panels every day of the week! [rafted of high -tensile steel with a powder coot finish, the Express Panel Transport features a
chain and boom latch system to prevent panel damage and ensure personal safety. Pre -configured to hold the pockage of your choice, removable panef racks allow for easy transportation
of up to 30 panels. Whether you need to haul panels across a pasture, down county roads or up the highway, you'll find a package to fit your needs.
5N rAV
F\
Pro Package
Chaparral Package
Purl#
Oescription Oty
Part;?
Oescription
OTY
8329-200-000
Clip/Clip Adapter 2
3341-610-000
Chaparral 6x 10 Panel
27
3341-610-000
Chaparral 6x 10 Panel 24
3345-610-000
Chapnrral 6x 10 G4
1
3342-072-000
Chaparral 6x6 GIF 1
3332.310-300
Triple Socket
2
3343-028-000
Chaparro128"ACG 1
2343-000-000
Express Panel Transport
1
3343.120-000
Chaparral 28"ACF 1
3344-610-078
Chaparral 6x 10 HPG 7'8" 1
Riata Package
2343-600-000
Express Panel Transport 1
Part #
Oescription
OTY
3381-510-000
Riata R 10 Panel
28
3382.072-000
Riato 72" GIF
2
3332-310-300
Triple Socket
2
2343.000-000
Express Panel Transport
1
THr.
LAY IT - IT
WEIGHINGtSYST,&- . �MS
: I
At W-W Paul Scales we can help you meet your livestock weighing needs, whA
ranch, in the feedlot or show barn. Designed to make your job easier, innovafn
simplify the weighing process, providing you quick pad occurate results. W-W PouI
built from high quality materials and powder coated to provide a durable fini
resistant to scratches, moisture, chemicals and extreme weather conditions.
HOG, SHEEP & GOAT SCALES
LARGE ANIMAL SCALES
GROUP SCALES
WEIGHT INDICATORS
WEIGH BEAMS
Hog, Sheep & Goat Scales
58SX HOG AND SHEEP CRATE SCALE 731 i-oo2-000
• 500 Lb. Single Animal Livestock Scale
■ Mechanical Ream w/1 Lb. Graduations
The Paul Scales Hog and Sheep Crate Scale has set the standard of performance for portable scales for many, many years.
The New and improved WW-Pau I Model 58SX still retains all of the time proven Paul Scales features and now also includes
the new Side Slide, 9i-Fold Gate design far faster and easier operation. Since there are no heavy gates to lift, the 58SX
can be operated by almost anyone, including children. The Model 58SX is easily retrofitted with an Electronic Load Cell,
Readout Indicator and Ticket or Tape Printer if desired. The simple but rugged design combined with heavy duty steel
construction guarontees you an accurate and dependable scale that you can count on for many years to come.
70SX HOG AND SHEEP CRATE SCALE 731 i-oio-000
700 lb. Single Animal Livestock Scale
■ Mechanical Ream w/1 Lb. Graduations
This Scale has all of the Paul Scale traits; Accuracy, Durability and Reliahility. A new Side Slide, Bi-Fold Gate Design makes
for simple and fast operation. Since there are no heavy gates to lift, the Model 70SX can he operated by almost anyone,
including children. The all steel holding crate is equipped with a galvanized woven wire floor and steel cleats for longer
life and easier cleaning. The Model 70SX is easily retrofitted with an Electronic Load Cell, Readout Indicator and a Ticket
or Tape Printer if desired. It is designed for the professional or commercial pork producers who demand ruggedness in
their equipment.
LFT-700S HOG AND SHEEP CRATE SCALE
■ 700Lb. Cap. x 1 Lh. Div. Single Animal Livestock Scale
This scale uses our field-tested and proven mechanical torque -bar suspension, combined with our state-of-the-art
electronics package. The accuracy and dependability of this scale is unsurpassed in today's animal scale market. The new
side slide gate design makes for simple and fast operation. The simple but rugged design combined with heavy duty steel
construction guarantee you an accurate and dependable scale hat you can count on for many years to come.
WEIGHING SYSTEMS
Large Animal Scales
240S SERIES SINGLE ANIMAL SCALE
• Available Models: 2405, 241 S, and 2425 (pictured)
■ 2,400 lb. Capacity
• 1 Lb. Beam Graduations
■ 35" x95" Platform
The All New and Improved Model 2405 Series Single Animal :.. i ':.. ,s the new KEVLAR 2,400 lb. Capacity Torque
Suspension Weighing Mechanism. The Model 2405 Series is equipped with an aluminum weigh beam that reads in 116,
increments with disc multipliers for a full 2,400 lb. usable capacity. The Scale is easily retrofitted with an Electronic Load
[ell, Readout Indicator and Printer if desired. The enclosed sheet steel beam stand gives added protection to the weigh
beam assembly and doubles as a desk top for recording weights, identification and other information. The Squeeze Side
Pen is adjustable in width for different sized animals and can actually cut weighing time in half. The 240 is equipped with
platform Iocks to protect the weighing mechanism when not in use or during transit. It is easily moved and operated by
one person.
300S SERIES SINGLE ANIMAL SCALE
• 3,000 lb. Capacity
■ Beam Graduations; 5 lb. (standard) l lb. (optional)
• 39" x99" Platform
The New and Improved WW-Paul Model 3005 Series Single Animal Scale continues to be the real WORKHORSE among
portable scales. It is designed for professional cattlemen, custom service users or commercial stockmen who demand
ruggedness in their equipment. Many colleges and experiment stations use this model. ... many have ordered more than
one. The Scale is easily retrofitted with an Electronic Load Cell, Readout Indicator and Printer if desired. The pen is
complete with an adjustable width squeeze side which holds the animals firmly in place and speeds up the weighing
process. The elaf spring axle assembly is equipped with a hand wench for raising and lowering, with new wheels aad tires
mounted on high speed hubs and bearings. If you hove rough conditions, rough roads or rough cattle, the WW-Paul Model
3005 Series will do the jab.
LFT-3000S SINGLE ANIMAL SCALE
■ 3,000 lb. Capacity x 1Ih. Division Single Animal Scale
■ Dimensions: Inside=39Wx120Lx70H, 0utside=46Wx120Lx80H
This scale will provide the some outstanding auuracy and dependability year after year with which the WW-Pouf Scale
customers are familiar. The 01 one lb. graduation of this scale far exceeds any other livestock scale on the market.
Whether for verifying or selling, you do not have to wait any longer to sell individual livestock by the pound from you
location. This certified Legal -Far -Trade scale will produce weigh tickets certified by the federal Weights and Measurements
Deportment. Due to the time and expense saved hauling you animals to a certified scale in your area, this scale pays for
itself in no time at all.
3t
WEIGHING SYSTEMS
Group Scales
602S GROUP LIVESTOCK SCALE
5 Ft. x 1 D Ft. Platform
■ 6,000 lb. Capacity
■ 5 Lh, Beam Graduations
The Model 602S Scale will handle up to 8 or 10 calves, making quick work of weighing a group of animals of shipping time.
The extra sturdy rein farced steel holding pen is equipped with full width swing open gofes an each end which allows fo► fast
entry and exit. The leaf spring equipped drop axle allows one person to position the scale for travel in one minute. Platform
locks protect the weighing mechanism during travel. the REVLAR Strop Torque Suspension System provides lasting accuracy
with no special installation which allows you to take the scale to the animals instead of moving animals to the scale.
801 S GROUP LIVESTOCK SCALE
• 8 ft. x 10 Ft. Platform
■ 10,000 Lh. [opacity
• Mechanical Beam w/516. Graduations
■ Optional Electronics Package w/1 lb. Graduations
The New WW-Paul Model 801 S is designed far professional cattlemen, custom service users or commercial stockmen who
demand ruggedness in their equipment. Its field tested and proven REVLAR Torque Suspension provides accuracy and
dependability which is unsurpassed in today's animal scale market. It is completely self contuined and movahle on any solid
and level foundation, The extremely rugged pea toasists of 4" sq. steel corner pasts and bows with a steel floor, The stale
is easily retrofitted with an Electronic Load Cell, Readout Indicator and Printer if desired. You can save time, hauling costs
and shrinkage with the Model 801 S.
Weight Indicators
LIVESTOCK MANAGEMENT SYSTEM
The WW-Paul Scales Model I0+710 Indicator can display and store up to 800 animal weights and their respective ID numbers.
The JD`s can he keyed in on the indicator key pad or scanned in with an Electronic Identification (LID) system. This data can
then he dawn -loaded from the 10+710 to a desktop, lap -top or hand-held computer for analysis. There are a number of
companies and systems that offer different types of software programs for livestock and show animal management.
IQ+390DC DIGITAL
WEIGHT INDICATOR
Featuring DC operation, a huge one -inch,
6-digital LCD display, and a stainless steel
HFMA 4X/IP66 enclosure, the
IQ+390-DC Indicator delivers heavy duty
performance at a reasonable price.
❑IGI-STAR
WEIGHING SYSTEM
Digi-Star scales have been exclusively designed
for the rugged animal weighing environment.
We have solutions to add Digi-Star scales to
any W-W Livestock Squeeze Chute.
THE
VA\F v
6 "am4.4t.
m — fr [� FCHUTE �] V EEZ HEAVY-DUTY MANUAL OR SELFCATCH HEADGATE
OVERVIEW
THE PRODUCER 640 CHUTE IS BUILT TO HANDLE
THE MOST DEMANDING CONDITIONS SMOOTHLY
AND QUICKLY. WITH STANDARD FEATURES SUCH
AS A PALPATION CAGE AND ASIDE SQUEEZE PANEL,
HANDLING CATTLE HAS NEVER BEEN MORE
EFFICIENT AND THE UNIQUE FLEX CUTTING GATE
MEANS NO EXTRA OVERHEAD SPACE IS NEEDED.
k 7��
V
BIFOLD TAILGATE
PALPATION CAGE
SIDE EXITS ON BOTH SIDES
RESTRAINING PIPE
RATCHET BAR SIDE SQUEEZE
E
LAVV�AAVV�
I�I-INV7 _rOCI{ SYSTEMS
IT f-al
V
ERR
ROPING CHUTES
Rodeo Roping Chute
53 J 0-000-000
• Meets or exceeds all professional association
rules and specifications. (The actual raping
chute used to write the specs).
• Combination steer and calf chute.
• Heck -rape windows to allow for easy access
for barrier equipment and increased
production speeds.
• Extra length (84 '/2" from harrier eyes to
rear of (hute) which allows room for
"pusher" without leaving tailgate open.
• Trigger latch for fast, easy, quiet operation.
• Can he operated from ground or horseback.
• Built heavier and stronger than most brands
on the market today.
Mini Roping Chute
53 l 0-000-050
• Scaled down to fit tie -down and
breakaway roping animals.
• Tapered sheet metal bottom to prevent
animals from turning around.
ng Chute
25
th than rodeo model
eeded. "Ouhide food Pimed
luty constru(tion as LA
:hate.
Arrow Pen
Our Designing Staff works 53 J 3-0 J 2-000
with professional cowboys on • Keep the roping chute loaded with no break in
❑ daily basis in order to the action.
provide the Rodeo Industry • Eliminates the need for sorting.
with the most efficient . Available in Inside Load and Outside Load.*
equipment avoilable.
LAVvIV;AAVV�
BUCKING CHUTES
Bucking Chutes
5331-100-000
• America's #1 selling bucking chute.
• Super heavy duty, yet safer for animals and
cowboys.
• All W-W bucking chutes come standard with
rolling door safety pads.
• Rolling doors feature unbreakable
Selectforce'-" plastic boards.
•Available with full 4' metal catwalk decking
or 2' and 4' folding catwalk for portability.
• Powder coated gunmetal gray or your
favorite custom color,
Mutton Bustin' Chutes. Same design concept as the big boy bucking
5335-200-000 chutes, scaled down for our wooly friends.
• Came in sets of two.
• Gates on front & back to make loading
much foster and easier.
AW
• Easily moved by hand or can be made
portable with removable wheel kit.
• Great crowd appeal and will definitely
increase ticket sales!
W, W
*Shawn with sell -catch headgate.
OVERVIEW
HYDRAULICALLY ASSISTED MANUAL SQUEEZE
CHUTE TO INCREASE OPERATOR SQUEEZE FORCE
WITH LESS EFFORT.
EVERY POUND OF PRESSURE ON PUMP APPLIES
NINE POUNDS OF PRESSURE ON THE ANIMAL.
SPRING -LOADED RELEASE, RESETS THE CHUTE
FOR THE NEXT ANIMAL QUICKLY.
HEAVY DUTY HOTROLL FOOR FOR EXTENDED LIFE
AND EASY CLEAN OUT
1100-
SQUEEZE CHUTE
INSIDE CHUTE DIMENSIONS OPERATE FROM 30" TO
12" WITH ABSOLUTELY NO HAND ADJUSTMENTS
NECESSARY REGARDLESS OF THE ANIMAL'S SIZE.
PALPATION DOOR TRAVELS WITH SIDE SQUEEZE
CREATING A FUNNEL TO ELIMINATE SMALL ANIMAL
TURN -AROUND.
BRANDING DOORS SWING OUT AND ARE
REMOVABLE.
LOWER ACCESS KICK PANEL SLIDES OFF FOR
ACCESS TO UNDERSIDE OF THE ANIMAL.
mill 19)JI1 1 11 01
%\A\Ar.V_ 16 JiLd 16",�
ILML V"JL.
rr rr
*Shown with self -catch headgate.
rH�
A I Ilr"'111R.'�11"�
SEEDSTOCK1100
SQUEEZE CHUTE
Standard Equipment
• Heavy-duty manual headgate or self -catch headgate
Rear drop gate or bi-fold gate
- Palpation cage latch follows squeeze sides
- Left and right side doors open for easy access
- Double side squeeze
• Equal vertical squeeze
• No forward or backward movement of squeeze
• Fiberglass butt bar
- Two removable restraining rails
- Removable breast bar
- Removable branding windows
- Removable lower kick panels
- Wheel assembly ready
Optional Equipment
• Portable Yoke trailer
• Digital Scale
• Blinders on branding windows
Overall Inside Working
Dimensions Dimensions
Q Length: 159" 139"
y Width: 47" 30"
a
LU
o Height: 92" 73"
�A- NV' 11V
W . AL
I
kjWxW
CIA
HANDLING EQUIPMENT
At W-W Livestock Systems we know that one system does not fit all needs, 11
developed specialty livestock handling equipment. From handling horned cattle c
cow to loading or trimming, W-W Livestock Equipment has you covered. Rugge
each piece is professionally designed and built to meet your needs for years to cc
CALF TABLE
Iall :1F:1:21a1191.10Iy:III 10
MATERNITY PEN
LONGHORN CHUTE
CROWD ALLEYS
TRIM STOCK CHUTE
1 rE� A�pLr yea
� � � � r` J� 1�lilii ►'1�'� i�� W �li►�1 Ili 4Q` F
21t R k'� i 8 0 0 i 9 i Syr~
'�- Calf Table
• WW Teco Calf Table is designed to work calves up to 600 pounds.
• Table features o headcatch and side squeeze bar for positive holding of animal.
i • Designed with exceptional balance, resulting in easy tilting.
■ A ratchet -driven dolly rope an the rear gate drown the animal's legs bock far easy access,
resulting in time -saving, efficient working of any calves.
` WW Teco Calf Table- [ek Hand Brand
2332-1OO-000
- WW Teco Calf Table- Right Hand Brand
-•Pr.-� - .� = 2332-200-000
Portable Load Chute 2344-000-000
• WW Portable load Chute loads ground level, 24", 36" and 48".
• load chute length is 14', with the load romp being 12', and less than 10' fall in transit.
• Panels on the side of load chute are sheeted 36" high.
• Includes non-skid ftumber floor and steel cleats every 18" to insure solid footing.
• Comes equipped with new 15' tires.
• All joints are saddle -cut for extra strength.
• Comes complete with a swing -out tongue.
WIT""
MM3
JW
,,� �,�
nISPECIALTY
HANDLING EQUIPMENT
Longhorn Chute 2312-101-000
• The WW Longhorn Chute is 10' long and can he easily set up and dismantled.
• Scissor headgate opens to 29' x 66'.
■ Headgote features sheet metal covering to limit animal's vision.
■ Features six exit options.
■ Multiple width adjustments controlled by spring loaded plunger latches.
ftzrce Partial Squeeze Full Squeeze
.� r'
I
Frwit edi Rear EA side jai
V Y
a
Maternity Pen 2331-040-000
• The WW Maternity Pen is a convenient 10' x10' size.
■ Con be easily setup and dismantled in any location.
■ Features a headgate and 3 exterior gates for easy access and operator safety.
• A "Split" Crowd gate permits newborn calves to nurse while the mother cow is restrained.
- V AAAk\ A r
■ ■ ■ li LUlili� :Ii�•3 it 31►1 A2
VW rr
Trim Stack Chute 2313-01 1-000
■ Available with either the Beef master Self Catch Headgate or WW Scissor Headgate.
• Both sidegates are secured with self contained spring loaded plunger latches.
■ Removable side restraint pipes an both sides.
■ Easy to setup and dismantle with self contained drop pins (no bolts required)
• Floor equipped with metal cleats to prevent slipping
SPECIALTY HANDLING EQUIPME.•Jl
Crowd AlleyS 2352-000-200
• WW Crowd Alleys are available in 2 or 3 straight and/or curved sections.
■ Tapered sides adjust from 12" to 24" at ground level, and from 20" to 34" at tap.
• Curved alleys encourage natural forward movement of cattle.
• All units have connecting pins an ends to receive doors and/or WW Panels.
3-Section Curved
2351-200-000
2-Section Curved
2352-200-000
3-Senior: Straight
2353-200-000
2-Section Straight
2354-200-000
3 Section Curved CrowdAlley
Topwr&andjWU=t ....... -------- rr a W
►N rr�i
ckv
SWEEP_
T'L �
.r:
SYSTEMS
WW Sweep Tubs are 6' high with 6 horizontal perimeter rails. Sweep Gate features a
spring -loaded latch which allows easy forward motion but prevents gate from coming
back, avoiding possihle injury to operator. Optional 7' Trap includes a 60" Gate -In -Frame
which allows easy sorting or loodout of animals.
FULL SHEETED, HALF SHEETED &
OPEN TUB OPTIONS
AVAILABLE WITH INLINE
PRE -GALVANIZED FLOW COAT
SPRING LOADED LATCH GATE FOR
EASY FORWARD MOTION
NOW AVAILABLE WITH LIGHT &
DURABLE BULL SHEET
rHF
I AV AV WkV V IF -
Sweep Tubs
V
Sweep Systems
Full Sheeted Tub— r
210 1323-210-200 �I: • 7'''
270 1323-270-200 r~j i-rr—�T"'` w
The New generation 210 Sweep System has a 120 degree sweep tub and has 11
Half Sheeted Tub and lightweight Bull Sheet. With many options available, this system can be di
2 1323-21a-1aa or noisy chains to distract livestock and the flexibility to move or add on to. Fc
swinging back, avoiding possible injury to operator. Constructed from 2 inch 1
270 1323-270-100 210 Sweep System with Full Sheeted TubIH
210 Sweep System with Half Sheeted Tub/F
210 Sweep System Open Tub/Alley 1321-211
Open Tub
210 1323-210-000
270 1323-270-000
SWEEP TUB SPECIFICATIONS
Tubing 2" x 14 Gauge
Height &
Rail Spacing 91/214
Sheet Metal 14 Gauge
Sweep Tub Radius 101
The New Generation 270 Sweep System has all the same features as the 21 [
Eliminator Gate, for peak efficiency, and the'T trap with a 60' Go te-i n-f ra w,
work out of working cattle.
270 Sweep System with Full Sheeted Tub/H.
210 Sweep System with Half Sheeted TubIH
210 Sweep System Open Tub/Alley 1321-270,
SWEEP SYSTEMS
New Generation
210
Sweep System
ie features stockman prefer. Available open, half sheet, full sheet or with the all new tong
;signed to fit your needs. Panels easily and quickly pin together which means no swingin
aturing a spring -loaded latch to allow for easy forward swing, but prevents the gale fror
4 go. tubing, the sweep is 6` tall with 6 horizontal rails, this system is built to lost.
alf Sheeted Alley 1321-210-200
Ialf Sheeted Alley 1321-210-100 Available in Rig
1-000
r New Generation
270
Sweep System
I Sweep System, but with a 180 degree tub. Add optional features like the
e for easy sorting or loodout to either system. WW Sweep Systems take the
alf Sheeted Alley 1321-270-200
alf Sheeted Alley 1321-270-100
.000 Available If
W "I
A0616--
. r�
New Generation Eliminator Gate
The Optional "Eliminator" Gate is available on all
Sweep Tubs. The "Eliminator" Gale brings peak
efficiency to your livestock operation by eliminating
all corners, guaranteeing no -hassle movement of
cattle and insuring maximum operator safety and
minimizing stress to all livestock.
210 Full Sheeted Sweep System w/Eliminator Gate 1321-271-200
210 Half Sheeted Sweep System WEIiminator Gate 1321-211-100
210 Open Sweep System w/Eliminator Gate 1321-211-000
270 Full Sheeted Sweep System w/Eliminator Gate 1321-271-200
270 Half Sheeted Sweep System w/Eliminator Gate 1321-271-100
270 open Sweep System w/Eliminator Gate 1321-271-000
FEMS
210 Sweep System with Eliminator Gate
270 Sweep System with Eliminator Gate
Available
with Bull Sheet
Even in the best designed facility cattle may
become distracted by things moving outside the
pen. Adding the bull sheet to WW panels sweep
tubs and alleys will help keep cattle flawing calmly
and quietly by reducing distractions. The Bull Sheet
keeps animals safe by eliminating sharp edges
and keeps legs inside fencing to reduce stress and
promote forward movement.
��im
pLY rytq�
►NrHeaP�
W-W Manufacturing VAT VA"m
LIVESTOCK SYSTEMS 8832 ' LIVESTOCK SYSTEMS
;'THOMAS, OK. 73669
►/I 999 . 1/ 661-3722
PRODUCT WARRANTY
5-Year Limited Warranty (BoarBuster Products have a 1-Year Limited Warranty)
W-W Manufacturing Co., Inc. ("W-W") warrants all products manufactured by W-W will be
free from defects in materials and workmanship. W-W's obligations under this warranty are
limited to repairing or replacing, at W-W's option, any components, parts or product found by
W-W to be defective as follows: (i) all coatings applied to products manufactured by W-W (such
as paint, powder coating, pre -galvanized and hot dip galvanized) are subject to and covered by
the original coating manufacturer's warranty; (ii) all BoarBuster components, parts or products
will be warranted for one (1) year from the date of shipment from W-W's manufacturing
facilities; and (iii) all other components, parts or products will be warranted for five (5) years
from the date of shipment from W-W's manufacturing facilities. This limited warranty does not
apply to sales of used components, parts or products; nor does it apply to any components,
parts, products or attachments that were not manufactured by W-W, as those will be covered by
the original manufacturer's warranty, if any. Any modification or alteration (such as cutting,
welding, drilling, etc.) of a W-W manufactured product without the advance written permission
of W-W will automatically void this limited warranty. When alterations are made, or
components, parts, products or attachments are installed, W-W shall not be responsible for such
alteration or installation, or for the operation of the product, even if such alteration or
installation was done with W-W's permission. Repair or replacement of a component or part
under this limited warranty does not extend the warranty period which will continue to be based
on the date of shipment of the originally completed product. This warranty does not cover
normal wear and tear, lack of care or maintenance, or defects resulting from any use of a
product other than for its intended purpose. W-W does not warrant that the product, or any
part thereof, will meet local, state, municipal, or national laws or regulations. To obtain service
under this limited warranty contact W-W at the 800 number listed above.
EXCLUSION OF OTHER WARRANTIES AND REMEDIES. Except where such disclaimers
and exclusions are specifically prohibited by applicable law, the foregoing limited warranty is
the only guarantee or warranty applicable to this transaction, and such limited warranty is
given expressly and in lieu of all other warranties, express or implied, including, but not limited
to, any warranty of merchantability and/or fitness for a particular purpose. Any implied
warranties which exceed or differ from the limited warranty set forth above are expressly
disclaimed by W-W. You, as purchaser, agree that oral statements and/or any statements
contained on W-W's website and in W-W's general advertising, pamphlets, brochures or other
printed materials do not constitute warranties, and that any orders you place were not placed in
reliance upon them. You further agree that except where such limitations and exclusions are
specifically prohibited by applicable law, YOUR SOLE AND EXCLUSIVE REMEDY
AGAINST W-W SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE
PARTS, AT W-W'S OPTION, AS PROVIDED ABOVE, and that no other remedy shall be
available. This exclusive remedy shall not be deemed to have failed of its essential purpose as
long as W-W is willing and able to repair or replace defective parts in the prescribed manner.
Under no circumstances will you be entitled to receive any incidental or consequential damages.
The limited warranty set out above is subject to change by W-W at any time, in its sole
discretion; provided, however, that the limited warranty in effect on the date a product is
shipped from W-W's manufacturing facility shall govern any warranty claims related to such
product filed after such change. This limited warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
EXHIBIT C
CONFLICT OF INTEREST QUESTIONNAIRE FORM CIQ
For vendor doing business with local governmental entity
This questionnaire reflects changes made to the law by H.B. 23, 84th Leg., Regular Session. OFFICE USE ONLY
This questionnaire is being filed in accordance with Chapter 176, Local Government Code, by a vendor who pate Received
has a business relationship as defined by Section 176.001(1-a) with a local governmental entity and the
vendor meets requirements under Section 176.006(a).
By law this questionnaire must be filed with the records administrator of the local governmental entity not later
than the 7th business day after the date the vendor becomes aware of facts that require the statement to be
filed. See Section 176.006(a-1), Local Government Code.
A vendor Commits an offense if the vendor knowingly violates Section 176.006. Local Government Code. An
offense under this section is a misdemeanor.
J Name of vendor who has a business relationship with local governmental entity.
J
❑ Check this box if you are filing an update to a previously filed questionnaire. (The law requires that you file an updated
completed questionnaire with the appropriate filing authority not later than the 7th business day after the date on which
you became aware that the originally filed questionnaire was incomplete or inaccurate.)
J Name of local government officer about whom the information is being disclosed.
1 �/ lt�
Dame of Officer
J Describe each employment or other business relationship with the local government officer, or a family member of the
officer, as described by Section 176.003(a)(2)(A). Also describe any family relationship with the local government officer.
Complete subparts A and B for each employment or business relationship described. Attach additional pages to this Form
CIO as necessary.
A. Is the local government officer or a family member of the officer receiving or likely to receive taxable income,
other than investment income, from the vendor?
Yes F-1 No
B. Is the vendor receiving or likely to receive taxable income, other than investment income, from or at the direction
of the local government officer or a family member of the officer AND the taxable income is not received from the
local governmental entity?
= Yes F--] No
J Describe each employment or business relationship that the vendor named in Section 1 maintains with a corporation or
other business entity with respect to which the local government officer serves as an officer or director, or holds an
ownership interest of one percent or more.
J
❑Check this box if the vendor has given the local government officer or a family member of the officer one or more gifts
as described in Section 176.003(a)(2)(B), excluding gifts described in Section 176.003(a-1).
71
Signature of 4,n6ngs,,,,, with the governmental entity Date
Form provided by Texas Ethics Commission www.ethics.state.tx.us Revised 111/2021
CONFLICT OF INTEREST QUESTIONNAIRE
For vendor doing business with local governmental entity
A complete copy of Chapter 176 of the Local Government Code may be found at http://www.statutes.legis.state.tx.us/
Docs/LG/htm/LG.176.htm. For easy reference, below are some of the sections cited on this form.
Local Government Code 4 176.001(1-a): "Business relationship" means a connection between two or more parties
based on commercial activity of one of the parties. The term does not include a connection based on:
(A) a transaction that is subject to rate or fee regulation by a federal, state, or local governmental entity or an
agency of a federal, state, or local governmental entity;
(B) a transaction conducted at a price and subject to terms available to the public; or
(C) a purchase or lease of goods or services from a person that is chartered by a state or federal agency and
that is subject to regular examination by, and reporting to, that agency.
Local Government Code S 176.003(a)(2)(A) and (B):
(a) A local government officer shall file a conflicts disclosure statement with respect to a vendor if:
(2) the vendor:
(A) has an employment or other business relationship with the local government officer or a
family member of the officer that results in the officer or family member receiving taxable
income, other than investment income, that exceeds $2,500 during the 12-month period
preceding the date that the officer becomes aware that
(i) a contract between the local governmental entity and vendor has been executed;
or
(ii) the local governmental entity is considering entering into a contract with the
vendor;
(B) has given to the local government officer or a family member of the officer one or more gifts
that have an aggregate value of more than $100 in the 12-month period preceding the date the
officer becomes aware that:
(i) a contract between the local governmental entity and vendor has been executed; or
(ii) the local governmental entity is considering entering into a contract with the vendor.
Local Government Code § 176.006(a) and (a-1)
(a) Avendor shall file a completed conflict of interest questionnaire if the vendor has a business relationship
with a local governmental entity and:
(1) has an employment or other business relationship with a local government officer of that local
governmental entity, or a family member of the officer, described by Section 176.003(a)(2)(A);
(2) has given a local government officer of that local governmental entity, or a family member of the
officer, one or more gifts with the aggregate value specified by Section 176.003(a)(2)(B), excluding any
gift described by Section 176.003(a-1); or
(3) has a family relationship with a local government officer of that local governmental entity.
(a-1) The completed conflict of interest questionnaire must be filed with the appropriate records administrator
not later than the seventh business day after the later of:
(1) the date that the vendor:
(A) begins discussions or negotiations to enter into a contract with the local governmental
entity; or
(B) submits to the local governmental entity an application, response to a request for proposals
or bids, correspondence, or another writing related to a potential contract with the local
governmental entity; or
(2) the date the vendor becomes aware:
(A) of an employment or other business relationship with a local government officer, or a
family member of the officer, described by Subsection (a);
(B) that the vendor has given one or more gifts described by Subsection (a); or
(C) of a family relationship with a local government officer.
Form provided by Texas Ethics Commission www.ethics.state.tx,us Revised 111/2021