Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
025150 - Construction-Related - Contract - Conatser Construction, Inc.
CCI1Y SECRETARY ✓ D.O.E. FiLE SPECIFICATIONS CO 4 � dACT C BONDING CO.AND ��E w \i CONSTRUCTION'S � @ ��s'�g ('��e e �/ CONTRACT DOCUMENTS ^' �y/� �v�a p's�.n�d�si�br/{�'V®f COIVTII/1CTCITY SECRETARY� 6,50 FOR: CUENT DEPAW KMO DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 PS46-070460410280 UNIT 1, UNIT 2, UNIT 3, AND UNIT 4 DOE NO. 1828, 2526, 2527, AND 2528 UNIT 1 L-1756; L-1757; L-3097; L-3775; L-4187; L-6342 (DOE No. 1828) L-994; L-996; L-1264; L-1265; L-1591; L-2285; L-2480; (DOE No. 2526) L-2513; L -2513"A"; L-2534; L-3038; L-2593; L-2594 L-2660; M-50 — L-977; L-988; L-992; L-1002; L-1012; L-1015; L-1040; No. 2527) L-1083; L-1570 UNIT 4 L-1010; L-2073; L-2074; L-2375; L-3397; L-2480; (DOE No. 2528) L-2533; L-3434; L-3509; L -3509"A"; L-4952; L -4952"A" IN THE CITY OF FORT WORTH, TEXAS KENNETH L. BARR BOB TERRELL MAYOR CITY MANAGER Prepared for: DEPARTMENT OF ENGINEERING A. DOUGLAS RADEMAKER, P.E. DIRECTOR, DEPARTMENT OF ENGINEERING HUGO A. MALANGA, P.E. DIRECTOR, DEPARTMENT OF TRANSPORTATION AND PUBLIC WORKS LEE BRADLEY, P.E. DIRECTOR, WATER DEPARTMENT April, 1999 IPrepared by: J. B. DAVIES INC. ENGINEERS -SURVEYORS FORT WORTH, TEXAS 1 IA RECORD 6CTYactsk\Y 0 I 0 I 0 L 0 0 0 I II I I C 0 LI I CITY OF FORT WORTH, TEXAS DEPARTMENT OF ENGINEERING ADDENDUM No. 1 to: TO THE SPECIFICATIONS AND CONTRACT DOCUMENTS for MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 PS46-070460410280 UNIT 1, UNIT 2, UNIT 3, AND UNIT 4 DOE NO. 1828, 2526, 2527, AND 2528 Bid Receipt Date - Thursday, May 27, 1999 The Specifications and Contract Documents for the subject project are hereby revised or amended as follows: Addendum no. 1, Change no. 1, PART B, PROPOSAL, UNIT 3 Page B-39, Item number 1) *8 -Inch PVC Sanitary Sewer Pipe; All Trench Depths, CHANGE the Quantity rom: ,069 LF CHANGE the Quantity to: 3,029 LF Addendum no. 1, Change no. 2, PART B, PROPOSAL, UNIT 3 Page B-39, Item number 5) *8 -Inch PVC Sanitary Sewer Pipe; By Method Other Than Open Cut, CHANGE the Quantity rom: 10 F CHANGE the Quantity to: OMIT THIS ITEM ENTIRELY Addendum no. 1, Change no. 3, PART B, PROPOSAL, UNIT 3 Page B-39, Item number 6) *8 -Inch DIP Sanitary Sewer Pipe; By Method Other Than Open Cut, CHANGE the Quantity rom: 5)1 LF CHANGE the Quantity to: 202 LF Addendum no. 1, Change no. 4, PART B, PROPOSAL, UNIT 3 Page B-45, The last line of text on the page: CHANGE the text rom: P T — B PROPOSAL, UNIT 1 CHANGE the text to: PART — B PROPOSAL, UNIT 3 Addendum No. 1, Page 1 of 2 C 0 C I C 0 I C G 0 The Construction Plans for the subject project are hereby revised or amended as follows: Addendum no. 1 Change no. 5 SHEET NO.40 of 62 — SANITARY SEWER REHABILITATION, L-988, STA. 5+96 TO STA. 14+05 CHANGE the PROPOSED PIPE MATERIAL rom: 20 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 11+12 to 11+32 CHANGE the PROPOSED PIPE MATERIAL to: 20 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 11+12 to 11+32 Addendum no. 1 Change no. 6 SHEET NO.42 of 62 — SANITARY SEWER REHABILITATION, L-1002, STA. 0+00 TO STA. 4+40.00 CHANGE the PROPOSED PIPE MATERIAL rom: 24 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 1+90 to 2+14 CHANGE the PROPOSED PIPE MA TERIAL to: 24 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 1+90 to 2+14 Addendum no. I Change no. 7 SHEET NO.46 of 62 — SANITARY SEWER REHABILITATION, L-1570, STA. 0+17.88 TO STA. 5+85 CHANGE the PROPOSED PIPE MATERIAL rom: 32 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 0+59 to 0+91 and 40 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 1+30 to 1+70 and 20 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 2+04 to 2+24 and 12 LF of 8" PVC SEWER BY METHOD OTHER THAN OPEN CUT station 3+41 to 3+53 a CHANGE the PROPOSED PIPE MATERIAL to: 32 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 0+59 to 0+91 and 40 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 1+30 to 1+70 and i 11, I I I I 20 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 2+04 to 2+24 and 12 LF of 8" Class 51 DIP SEWER BY METHOD OTHER THAN OPEN CUT station 3+41 to 3+53 This Addendum forms a part of the Contract Documents referenced above and modifies the original Contract Documents and Construction Plans. Please acknowledge receipt of this Addendum on the space provided below, and on Page B-45 of your Bid Proposal for Unit 3 and note the outer envelope of your bid. Failure to return a signed copy of the addendum with this proposal shall be grounds for rendering the bid non -responsive. Failure to acknowledge receipt of the Addendum could subject bidder to disqualification. Receipt Ackn wled ed: C e n c�sG r o-rvS l By: Title: Ire s clenf Address: 1.o. &ir 15 Ro¢ 1;4 yJo,rdd,, i o-- 21,119 Telephone: Z/'?- S3 -t7 q3 Rick Trice, P.E., Manager Consultant Services (DOE) By: ! 3 h 1�� )!�� Addendum No. 1, Page 2 of 2 May -13-99 04:25P AGT & 360 817 870 1503 P.01 ri rrn 0 0 I CITY OF FORT WORTH DEPARTMENT OF ENGINEERING ADDENDUM NO 2 TO THE PLANS AND SPECIFICATIONS AND CONTRACT DOCUMENTS FOR MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 PS46-070460410280 DOE NOS. 1828, 2526, 2527, AND 2528 BID RECEIPT DATE THURSDAY, MAY 27, 1999: ISSUED THURSDAY MAY 13,1999: Prospective bidders are hereby notified of the following: 1. Paragraph C6-6.12 of the Part C — General Conditions should be deleted In its entirety and replaced with the following: "C6-6.12 CQNTRA TOR'S RESPO rcr ILITY FOR DAMAg CLAIMS Contractor covenants and agrees to indemnify City's engineer and architect, and their personnel at the project site for Contractor's sole negligence. In addition. Contractor covenants and agrees to indemnify, hold harmless and defend, at its own expense, the Owner, its officers, servants and employees, from and against any and all claims or suits for property loss, property damage, personal injury, including death, arising out of, or alleged to arise out of, the work and services to be performed hereunder by Contractor, its officers. agents, employees, subcontractors, licensees or invitees, whether or �y j +�ry�ddmage or d d h r h li e w t f $ervants. or employees_ Contractor likewise covenants and agrees to indemnify and hold harmlessihe Owner from and against any and all injuries to Owner's officers, servants and employees and any damage, loss or destruction to property the Owner arising from the performance of any of the terms and conditions of this itrwlwther orn ll n i I r in the event Owner receives a written claim for damages against the Contractor or Its subcontractors prior to final payment, final payment shall not be made until Contractor either (a) submits to Owner satisfactory evidence that the claim has been settled and/or a release from the claimant involved, or (b) provides Owner with a letter from Contractor's liability insurance carrier that the claim has been referred to the insurance carrier_ The Director may, if he deems it appropriate, refuse to accept bids on other City of Fort Worth public work from a Contractor against whom a claim for damages is outstanding as a result of work performed under a City Contract." 2. All other provisions of the plans, specifications and contract documents for the project which are not expressly amended herein shall remain in full force and effect. This Addendum forms a part of the Contract Documents referenced above and modifies the original Contract Documents and Construction Plans. Please acknowledge receipt of this Addendum on the space provided below, on each Unit for which a bid is submitted as follows: Page 8-15 Unit 1. Page B -3o Unit2, Page B-45 Unit 3 and Page B-60 Unit 4, and note on the outer envelope of your bid. Failure to return a signed copy of the addendum with the proposal shall be grounds for rendering the bid non -responsive. A signed copy of this addendum shall be placed into the proposal at the time of bid submittal. Receipt Acknowledged: Corn A!'S*,Y a,� cfi By resr'den:f- Address: Po. I'oq.. �o,-f Wad, -- ' rt 9 Telephone: gt1-S3v-Vi ADDENDUM.PART C Rick Trice, P.E., Manager Consultant Services (DOE) By: 04 /,e1u/t, (or A G C (lice- 0 May -25-99 03:42P AGT & JBD 817 870 1503 P.01 0 I 0 I Ii I 0 0 I 0 I 0 0 0 0 0 I CITY OF FORT WORTH, TEXAS DEPARTMENT OF ENGINEERING ADDENDUM No. 3 to: TO THE SPECIFICATIONS AND CONTRACT DOCUMENTS for MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6. CONTRACT 1), PART 8 PS46-070460410280 UNIT 1, UNIT 2, UNIT 3, AND UNIT 4 DOE NO. 1828, 2526, 2527, AND 2528 Bid Receipt Date - Thursday, May 27, 1999 The Specifications and Contract Documents for the subject project are hereby revised or amended as follow: Addendum no. 3, Change no. 1. PART B. PROPOSAL, UNIT 2 Page B-26, Delete Pay Item No. 18 in it's entirely This Addendum forms a part of the Contract Documents referenced above and modifies the original Contract Documents and Construction Plans. Please acknowledge receipt of this Addendum on the space provided below, and on Page B-30 of your Bid Proposal for Unit 2 and note the outer envelope of your bid. Failure to return a signed copy of the addendum with this proposal shall be grounds for rendering the bid non -responsive. Failure to acknowledge receipt of the Addendum could subject bidder to disqualification. Receipt Ackno lodged: Co t�.a�sa.r s i ru By: Title: rasid Address_ Ro. 15804 14- Wos'4li , i 1(os 9 Telephone: Sin 5 3 (- ,-q3 Rick Trice, P.E_, Manager Consultant Services (DOE) Addendum No. 3, Page loll 0 May -26-99 03:33P AGT & JBD 0 817 870 1503 P.01 C 0 0 I I CITY OF FORT WORTH, TEXAS DEPARTMENT OF ENGINEERING ADDEli_ D1alh o 4 to: TO THE SPECIFICATIONS AN]) CONTRACT DOCUMENTS for MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 PS46-070460410280 UNIT 1, UNIT 2, UNIT 3, AND UNIT 4 DOE NO. 1828, 2526, 2527, AND 2528 Btd Receipt Date , 1999 The Speetfieations and Contract IM um nts for the subject project 7are hereby revised or amended as follows: age B-14, Change the page numbers referenced by the blocked paragraph stating: "BIDDER OF UNIT I MUST COMPLETE DOCUMENTATION ON PAGES B-5, B-6,13-7, B-28" to read: "BIDDER OF UNIT I MUST ALSO COMPLETE THE BID SUMMARY PAGE B-61" Oage B-29, Change the page numbers referenced by the blocked paragraph l staging: "BIDDER OF UNIT 2 MUST COMPLETE DOCUMENTATION ON PAGES 13-13 B- 14,13-15, / to read: "BIDDER OF UNIT 2 MUST ALSO COMPLETE THE BID SUMMARY PACE B -61"x-32" UERTB. P1tOJOSAL, Ii I I I 0 0 P ge B-43, Change the page numbers referenced by the blocked paragraph stating: BIDDER OF UNIT 3 MUST COMPLETE DOCUMENTATION ON PACES B-21, B-22, B-23, B-32" to read: "BIDDER OF UNIT 3 MUST ALSO COMPLETE TIRE BID SUMMARY PAGE B-61„ P e B-58, Change the page numbers referenced by the blocked paragraph stating: "BIDDER OF UNIT 4 MUST COMPLETE DOCUMENTATION ON PAGES B-29, B-30, 13-31, 8-32" to read: `BIDDER OF UNIT 4 MUST ALSO COMPLETE THE BID SUMMARY PAGE B-61" This Addendum forms a part of the Contract Documents referenced above and modifies the original Contract Documents and Construction Plans. Please acknowledge receipt of this Addendum on the space provided below, on the signature page of your Bid Proposal and note the outer envelope of your bid. Failure to return a signed copy of the addendum with this proposal shall be grounds for rendering the bid non -responsive. Failure to acknowledge receipt of the Addendum could subject bidder to disqualification. 'Our apologies for this late, minor addendum. Receipt Ackno led ed: By: Title: Pcestcl--I— Address: 13 /SBO1- #y¢. �t/n#, 7 '?!01, 9 Telephone: 8'/7- 534E —/14L3 By. old d u G (or 111(4: /-f c. Addendum No. 4, Page 1 of 1 0 0 aSPECIFICATIONS AND fl CONTRACT DOCUMENTS FOR: MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM Q REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 fl PS46-070460410280 UNIT 1, UNIT 2, UNIT 3, AND UNIT 4 DOE NO. 1828, 2526, 2527, AND 2528 UNIT 1 L-1756; L-1757; L-3097; L-3775; L-4187; L-6342 (DOE No. 1828) UNIT 2 L-994; L-996; L-1264; L-1265; L-1591; L-2285; L-2480; (DOE No. 2526) L-2513; L -2513"A"; L-2534; L-3038; L-2593; L-2594 L-2660; M-50 UNIT 3 L-977; L-988; L-992; L-1002; L-1012; L-1015; L-1040; (DOE No. 2527) L-1083; L-1570 UNIT 4 L-1010; L-2073; L-2074; L-2375; L-3397; L-2480; JJ (DOE No. 2528) L-2533; L-3434; L-3509; L -3509"A"; L-4952; L -4952"A" IN THE CITY OF FORT WORTH, TEXAS 0 0 0 0 u 0 I 0 C KENNETH L. BARR MAYOR BOB TERRELL CITY MANAGER Prepared for: DEPARTMENT OF ENGINEERING A. DOUGLAS RADEMAKER, P.E. DIRECTOR, DEPARTMENT OF ENGINEERING HUGO A. MALANGA, P.E. DIRECTOR, DEPARTMENT OF TRANSPORTATION AND PUBLIC WORKS LEE BRADLEY, P.E. DIRECTOR, WATER DEPARTMENT April, 1999 Prepared by: J. B. DAVIES INC. ENGINEERS -SURVEYORS FORT WORTH, TEXAS q (t�"•a.. r.s.! v 0 0 0 a 0 0 0 0 0 0 TABLE OF CONTENTS WATER LINE AND SANITARY SEWER IMPROVEMENTS PART A: NOTICE TO BIDDERS COMPREHENSIVE NOTICE TO BIDDERS VENDOR COMPLIANCE TO STATE LAW SPECIAL INSTRUCTIONS TO BIDDERS PART B: M/WBE BID SPECIFICATIONS PROPOSAL PART C: GENERAL CONDITIONS PART Cl: SUPPLEMENTARY CONDITIONS PART D: SPECIAL CONDITIONS (Water Department) PART DA: ADDITIONAL SPECIAL CONDITIONS (Water Department) PART E: MATERIAL SPECIFICATIONS DETAILS PART F: CERTIFICATE OF INSURANCE CONTRACTOR COMPLIANCE WITH WORKERS COMPENSATION LAW PART G: BONDS (City of Fort Worth) Performance Bond Payment Bond Maintenance Bond CONTRACT (City of Fort Worth) APPENDIX A: SRF REQUIREMENTS APPENDIX B: EASEMENTS 0 NOTICE TO BIDDERS Sealed Proposals for the following: FOR: MAIN M-390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS Q (GROUP 6, CONTRACT 1), PART 8 SEWER PROJECT NO. PS46-070460410280 aUNIT 1 2,991 LF 8" PVC by Open Cut, 404 LF DIP by Open Cut, (DOE No. 1828) 21 LF HDPE by Open Cut, 217 LF 6" to 8" by Pipe a Enlargement, 901 LF 8" DIP by Method Other Than Open Cut, 18 Standard 4' Dia. SSMH, 1 4' Dia. Drop SSMH UNIT 2 45 LF 6" PVC by Open Cut, 1,860 LF 8" PVC by Open (DOE No. 2526) Cut, 56 LF 10" PVC by Open Cut, 391 LF 12" PVC by Open Cut, 253 LF DIP by Open Cut, 76 LF HDPE by Open Cut, 6,970 LF 6" to 8" by Pipe Enlargement, 1,076 LF 10" to 12" by Pipe Enlargement, 220 LF 8" DIP by Method Other Than Open Cut, 40 Standard 4' Dia. SSMH, 3 4' Dia. Drop SSMH fl UNIT 3 3,069 LF 8" PVC by Open Cut, 658 LF DIP by Open Cut, (DOE No. 2527) 327 LF 6" to 8" by Pipe Enlargement, 54 LF 8" DIP by Method Other Than Open Cut, 108 LF 8" PVC by Method Other Than UOpen Cut, 18 Standard 4' Dia. SSMH, 2 4' Dia. Drop SSMH UNIT 4 75 LF 6" PVC by Open Cut, 5,146 LF 8" PVC by Open (DOE No. 2528) Cut, 18 LF 18" PVC by Open Cut, 320 LF DIP by Open Cut, 320 LF 6" to 8" by Pipe Enlargement, 31 Standard 4' Dia. SSMH, 2 4' Dia. Drop SSMH Addressed to Mr. Bob Terrell, City Manager of the City of Fort Worth, Texas, gas, will be received at the Purchasing Office until 1:30 p.m., Thursday May 27, 1999, and then publicly opened and aread aloud at 2:00 p.m., in the Council Chambers. Plans, Specifications and Contract Documents for this project may be obtained at the office of the Department of Engineering, Municipal Office Building, 1000 Throckmorton Street, Fort Worth, Texas. One set of plans and documents will be provided for a deposit of Fifty Dollars ($50.00). These documents contain additional information for prospective bidders. [I No pre -bid conference will be held on this Project. For additional information, please contact Ed Green, P.E. of J.B. Davies, Inc. at (817) 335-3154, or Mr. Mike Domenech, P.E., Project Manager of the City of Fort Worth, Department of Engineering at (817) 332-5478 EXT. 32. Advertising Dates: April 29, 1999 May 6,1999 0 0 0 0 ci COMPREHENSIVE NOTICE TO BIDDERS FOR: MAIN M-390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 SEWER PROJECT NO. PS46-070460410280 UNIT 1 L-1756; L-1757; L-3097; L-3775; L-4187; L-6342 [] (DOE No. 1828) 0 UNIT 2 L-994; L-996; L-1264; L-1265; L-1591; L-2285; L-2480; (DOE No. 2526) L-2513; L -2513"A"; L-2534; L-3038; L-2593; L-2594 L-2660; M-50 [1 UNIT 3 L-977; L-988; L-992; L-1002; L-1012; L-1015; L-1040; (DOE No. 2527) L-1083; L-1570 [1 UNIT 4 L-1010; L-2073; L-2074; L-2375; L-3397; L-2480; (DOE No. 2528) L-2533; L-3434; L-3509; L -3509"A"; L-4952; L -4952"A" 0 0 0 Addressed to Mr. Bob Terrell, City Manager of the City of Fort Worth, Texas, will be received at the Purchasing Office until 1:30 p.m., Thursday May 27,1999, and then publicly opened and read aloud at 2:00 p.m. Plans, Specifications and Contract Documents for this project may be obtained at the office of the Department of Engineering, Municipal Office Building, 1000 Throckmorton Street, Fort Worth, Texas. . One set of plans and documents will be provided for a deposit of Fifty Dollars ($50.00). These documents contain additional information for prospective bidders. D All bidders will be required to comply with Provision 5159a of "Vernon's Annotated Civil Statutes" of the State of Texas with respect to the payment of prevailing wage rates and City Ordinance No. 7278, as amended by City Ordinance No. 7400 (Fort Worth City Code Sections 13-A-21 through 13-A-29), prohibiting discrimination in employment practices. 0 0 0 0 0 NO pre -bid conference will be held on this Project. Bid security is required in accordance with Paragraph 2 of the Special Instructions to Bidders. The major work on the above -referenced project shall consist of the following: UNIT 1 2,991 LF 8" PVC by Open Cut, 404 LF DIP by Open Cut, (DOE No. 1828) 21 LF HDPE by Open Cut, 217 LF 6" to 8" by Pipe Enlargement, 901 LF 8" DIP by Method Other Than Open Cut, 18 Standard 4' Dia. SSMH, 1 4' Dia. Drop SSMH a 0 0 0 El I 0 0 a 0 0 0 0 UNIT 2 45 LF 6" PVC by Open Cut, 1,860 LF 8" PVC by Open (DOE No. 2526) Cut, 56 LF 10" PVC by Open Cut, 391 LF 12" PVC by Open Cut, 253 LF DIP by Open Cut, 76 LF HDPE by Open Cut, 6,970 LF 6" to 8" by Pipe Enlargement, 1,076 LF 10" to 12" by Pipe Enlargement, 220 LF 8" DIP by Method Other Than Open Cut, 40 Standard 4' Dia. SSMH, 3 4' Dia. Drop SSMH UNIT 3 3,069 LF 8" PVC by Open Cut, 658 LF DIP by Open Cut, (DOE No. 2527) 327 LF 6" to 8" by Pipe Enlargement, 54 LF 8" DIP by Method Other Than Open Cut, 108 LF 8" PVC by Method Other Than Open Cut, 18 Standard 4' Dia. SSMH, 2 4' Dia. Drop SSMH UNIT 4 75 LF 6" PVC by Open Cut, 5,146 LF 8" PVC by Open (DOE No. 2528) Cut, 18 LF 18" PVC by Open Cut, 320 LF DIP by Open Cut, 320 LF 6" to 8" by Pipe Enlargement, 31 Standard 4' Dia. SSMH, 2 4' Dia. Drop SSMH Included in the above will be all other miscellaneous items of construction as outlined in the Plans and Specifications. The City reserves the right to reject any and/or all bids and waive any and/or all formalities. Bidders shall not separate, detach, or remove any portion, segment, or sheets from the contract document at any time. Bidders must complete the proposal section and submit the complete specifications book or face rejection of the bid as non -responsive. AWARD OF CONTRACT: No bid may be withdrawn until the expiration of ninety (90) days from the date bids are opened. The award of contract, if made, will be within ninety (90) days after the opening of bids, but in no case will the award be made until all the necessary investigations are made as to the responsibility of the bidder to whom it is proposed to award the contract. SUMBISSION OF BID(S) AND AWARD OF CONTRACT(S): This document is designed as Four (4) separate contract documents and shall not be construed as being a single contract. The proposal sections are provided as Four (4) individual proposals with six (Four) individual M/WBE specifications and are arranged in units to allow a prospective bidders to submit bids on one unit, some of the units, or all of the units. Award of contract(s), if made, shall be to the responsive low bidder for each individual unit. If a contractor is the responsive low bidder on two units or more, a single set of p contract documents consisting of all applicable units will be created and one single award of contract shall be made. The Contractor shall comply with the City's M/WBE Ordinance on each unit. a 0 0 0 Construction time on all units will run concurrently. For situations involving approved roved contracts with multiple units, the total allowable construction completion time period for pall the units shall be the same as the unit with the longest construction time period. Bidders shall not Separate, Detach, Remove any portion, segment(s), or sheet from the aContract Documents at any time. Bidders must complete the proposal section(s) and submit the complete Specifications Book or face Rejection of Bid as Nom -Responsive. 0 In accordance with the City of Fort Worth Ordinance No. 11923, the City of Fort Worth has goals for the participation of minority business enterprises and women business enterprises in City contracts. A copy of the Ordinance can be obtained from the Office of the City Secretary. The bidder shall submit the M/WBE UTILIZATION FORM. PRIME CONTRACTOR WAIVER FORM, and/or the GOOD FAITH EFFORT FORM Q ("Documentation"), as appropriate. The Documentation must be received by the contracting department no later than 5:00 p.m., five (5) City business days after the bid opening date. The bidder shall obtain a receipt from the appropriate employee of the contraction department to whom delivery was made. Such receipt shall be evidence that the Documentation was received by the City. Any contract or contracts awarded under this Notice to bidders are expected to be funded in part by as loan from the Texas Water Development Board. Neither the State of Texas nor any of its departments, agencies, or employees are, or will be, party to this Notice to Bidders or any resulting contract. The contract or contracts are subject to regulations contained in 31 TAC, Chapter 363, in effect on the date this contract is executed. Ii For additional information, please contact Ed Green, P.E. of J.B. Davies, Inc. at (817) 335-3154, or Mr. Mike Domenech, P.E., Project Manager of the City of Fort Worth, Department of Engineering at (817) 332-5478 EXT. 32. U BOB TERRELL GLORIA PEARSON CITY MANAGER CITY SECRETARY afl ADVERTISING DATES: DEPARTMENT OF ENGINEERING DOUGLAS A. RADEMAKER, P.E., DIRECTOR April29, 1999 May 6, 1999 By: o fl For: Rick Trice, P.E. Li Manager, Consulting Services Q 0 0 0 I VENDOR COMPLIANCE TO STATE LAW The 1_985 Session of the Texas Legislature passed House 8111 620 relative to the award of contracts to non-resident bidders. This law provides that, in order to be awarded a contract as low bidder, on -resident bidders (out-of-state contractors whose corporate offices or principal place of business are outside of the state of Texas) bid projects fcr construction, improvements, supplies or services in Texas at an amount lower than the lowest Texas resident bidder by the same amount that a Texas resident bidder would be required to underbid a non-resident bidder in order to obtain a comparable contract fl in the state in which the non-resident's principal place of business is located. The LI appropriate blanks in Section A must be filled out by all out-of-state or non-resident bidders in order for your bid t meet specifications. The failure of out-of-state or non - fl resident contractors to do so will automatically disqualify that bidder. Resident bidders LI must check the box in Section 8. A. Non-resident vendors in (give state), our principal place of business, are required to be percent lower than resident bidders by state law. A copy of the statute is attached. Non-resident venders in (give state), our principal place of business, are not required to underbid resident bidders. B. (Our 'ncipal place of business or corporate offices are in the State of Texas. LJ BIDDER: 0 0 0 0 0 Q Uovta er o -,54- CGit'y✓1, Company 1o. 1s.o4-- 4 -I o 11'J City State Zip By: cT r ca. 5e K (plea e print) Signatur • Title: rr'estcIey t (please print) THIS FORM MUST BE RETURNED WITH YOUR QUOTATION 0 ci SPECIAL INSTRUCTION TO BIDDERS (WATER DEPARTMENT) 1. PREQUALIFIATION REOUIRMENTS: All contractors submitting bids are 1] required to be prequalified by the Fort Worth Water Department prior to submitting bids. This prequalification process will establish a bid limit based on a technical evaluation and financial analysis of the contractor. It is the bidder's fl responsibility to submit the following documentation: a current financial statement, an acceptable experience record, an acceptable equipment schedule and any other documents the Department may deem necessary, to the Director of the Water Department at least seven (7) calendar days prior to the date of the opening of bids. (a)The financial statement required shall have been prepared by an independent certified public accountant or an independent public accountant holding a valid permit issued by an appropriate State licensing agency and shall have been so prepared as to reflect the financial status of the submitting company. This statement must be current and not more than one (1) year old. In the case that a bidding date falls within the time a new statement is being prepared, the previous statement shall be updated by proper verification. (b)For an experience record to be considered to be acceptable for a given project, Li it must reflect the experience of the firm seeking qualification in work of both the same nature and technical level as that of the project for which bids are to be received. (c) The Director of the Water Department shall be the sole judge as to the acceptability for financial qualification to bid on any Fort Worth Water Department project. a (d)Bids received in excess of the bid limit shall be considered non -responsive and will be rejected as such. II(e)The City, in it's sole discretion, may reject any bid for failure to demonstrate experience and/or expertise. (f) Any proposals submitted by a non-prequalified bidder shall be returned unopened, and if inadvertently opened, shall not be considered. a(g)The City will attempt to notify prospective bidders whose qualifications (financial, or experience) are not deemed to be appropriate to the nature and/or flmagnitude of the project on which bids are to be received. Failure to notify shall not be a waiver of any necessary' prequalification. ci o 0 0 Ii 0 I I] 0 I 0 0 I 0 n 0 0 a 0 2. BID SECURITY: A cashier's check or acceptable bidder's bond payable to the City of Fort Worth in an amount of not less than five percent (5 %) of the largest possible total of the bid submitted must accompany the bid, and is subject to forfeiture in the event the successful bidder fails to execute the Contract Documents within (10) days after the contract has been awarded. To be an acceptable surety on the bond, (1) the name of the surety shall be included on the current U.S. Treasury, or (2) the surety must have capital and surplus equal to ten times the limit of the bond. The surety must be licensed to do business in the State of Texas. The amount of the bond shall not exceed the amount shown on the Treasury list or one -tenth (1/10) the total capital and surplus. 3. BONDS: A performance bond, a payment bond and a maintenance bond each for one hundred (100%) percent of the contract price will be required, Reference C 3- 3.7. 4. WAGE RATES: Not less than the prevailing wage rates established by the City of Fort Worth, Texas and as set forth in the contract documents must be paid on this project. 5. AMBIGUITY: In the case of ambiguity or lack of clearness in stating prices in the Proposal the City reserves the right to adopt the most advantageous construction thereof to the City or to reject the Proposal. 6. BIDDER LICENSE: Bidder must be a licensed Contractor in the State of Texas. 7. NONRESIDENT BIDDERS: Pursuant to Article 601g, Texas Revised Civil Statutes, the City of Fort Worth will not award this contract to a nonresident bidder unless the nonresident's bid is lower than the lowest bid submitted by a responsible Texas resident bidder by the same amount that a Texas resident bidder would be required to underbid a nonresident bidder to obtain a comparable contract in the State in which the nonresident's principal place of business is located. "Nonresident bidder" means a bidder whose principal place of business is not in the State of Texas, but excludes a contractor whose ultimate parent company or majority owner hhs its principal place of business in the State of Texas. This provision does not apply if this contract involves Federal funds. 0 RA ci The appropriate blanks of the Proposal must be filled out by all nonresident bidders in order for the bid to meet specifications. The failure of a nonresident contractor to do so will automatically disqualify that bidder. 8. PAYMENT: If the contract amount is $25,000 or less, the contract amount shall be paid within forty-five (45) calendar days after completion and acceptance by the City. 9 9. AGE: In accordance with the policy ("Policy") of the Executive Branch of the Federal Government, Contractor covenants that neither it, nor any of its officers, members, agents, employees, program participants or subcontractors while D engaged in performing this contract, shall, in connection with the employment, advancement or discharge of employees in connection with the terms, conditions D or privileges of their employment, discriminate against persons because of their age except on the basis of a bona fide occupational qualification, retirement plan, or statutory requirement. Contractor further covenants that neither it nor its officers, members, agents, employees, subcontractors, program participants; or persons acting on their pbehalf, shall specify, in solicitations or advertisements for employees to work on this contract, a maximum age limit for such employment unless the specified maximum age limit is based upon a bona fide occupational qualification, retirement plan or statutory requirements. ci Contractor warrants it will fully comply with the 'policy and will defend, indemnify and hold City harmless against any claims or allegations asserted by third parties or subcontractors and/or its subcontractors' alleged failure to. comply with the above referenced Policy concerning age discrimination in the performance of this agreement. 10. DISABILITY: In accordance with the provisions of the Americans With Disabilities Act of .1990 ("ADA"), Contractor warrants that it and any and all of its subcontractors will not unlawfully discriminate on; the basis of disability in the Q provision of services to the general public, nor in the availability, terms and/or conditions of employment for applicants for employment with or employees of Contractor or any of its subcontractors. Contractor warrants it will fully comply awith the ADFA's provisions and any other applicable Federal, State and local laws concerning disability and will defend, indemnify and hold City harmless against aarising any claims or allegations asserted by third parties or subcontractors against City out of contractor's and/or its subcontractors' alleged failure to comply with the above referenced Policy concerning age discrimination in the performance of 0 this agreement. 0 ED 3 I 0 0 0 a C 0 J J a ci 0 I I 0 0 0 11. MINORITY AND WOMEN BUSINESS ENTERPRISES: In accordance with the City of Fort Worth Ordinance No.11923 the City of Fort Worth has goals for the participation of minority business enterprises and women business enterprises in City contracts. A copy of the Ordinance can be obtained from the Office of the City Secretary. In order for a bid to be considered responsive the AFFIDAVIT STATEMENT included within these bid documents must be completed and submitted with the bid. Failure to submit the completed AFFIDAVIT STATEMENT shall render the bid non -responsive. In addition, the bidder shall submit the MBE/WBE UTILIZATION FORM, PRIME CON'TRACTOR WAIVER FROM and/or the GOOD FAITH EFFORT FORM ("Documentation") as appropriate. The documentation must be received no later than 5:00 PM, five (5) City business days after the bid opening date. The bidder shall obtain a receipt from the appropriate employee of the managing department to whom delivery was made. Such receipt shall be evidence that the documentation was received by the City. Failure to comply shall render the bid nonresponsive. Upon request, Contractor agrees to provide the Owner complete and accurate information regarding actual work performed by a Minority Business Enterprise (MBE) and/or a Women Business Enterprise (WBE) on the contract and payment thereof. Contractor further agrees to permit any audit and/or examination of any books, records or files in its possession that will substantiate the actual work performed by an MBE and/or WBE. The misrepresentation of facts (other than a negligent misrepresentation) and/or the commission of fraud by the Contractor will be grounds for termination of the contract and/or initiating action under appropriate federal state or local laws or ordinances relating to false statements. Further, any such misrepresentation (other than a negligent misrepresentation) and/or commission of fraud will result in the Contractor being determined to be irresponsible and barred from participating in City work for a period of time of not less than three (3) years. Revised 9/24/97 A:\SIB. WTR 0 4 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 City of Fort Worth Minority and Women Business Enterprise Specifications SPECIAL INSTRUCTIONS FOR BIDDERS APPLICATION OF POLICY If the total dollar value of the contract is $25,000 or more, the M/WBE goal is applicable. If the total dollar value of the contract is less than $25,000, the MIWBE goal is not applicable. POLICY STATEMENT It is the policy of the City of Fort Worth to ensure the full and equitable participation by Minority/Women Business Enterprises (M/WBE) in the procurement of all goods and services to the City on a contractual basis. The objective of the Policy is to increase the use of M/WBE firms to a level comparable to the availability of M/WBEs that provide goods and services directly or indirectly to the City. M/WBE PROJECT GOALS The City's MBE/WBE goal on this project is 19% of the base bid value of the contract. 1W COMPLIANCE TO BID SPECIFICATIONS On City contracts of $25,000 or more, bidders are required to comply with the intent of the City's M/WBE Ordinance by either of the following: 1. Meet or exceed the above stated MIWBE goal, or; 2. Good Faith Effort documentation, or; 3. Waiver documentation. SUBMITTAL OF REQUIRED DOCUMENTATION The applicable documents must be received by the Managing Department, within the following times allocated, in order for the entire bid to be considered responsive to the specifications. 1. M/WBE Utilization Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. 2. Prime Contractor Waiver Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. 3. Good Faith Effort Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. FAILURE TO COMPLY WITH THE CITY'S M/WBE ORDINANCE, WILL RESULT IN THE BID BEING CONSIDERED NON -RESPONSIVE TO SPECIFICATIONS. Any questions, please contact the M/WBE Office at (817) 871-6104. Rev. 6/2/98 M-390, PART 8- UNIT 1 B-2 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1A Page 1 of 2 City of Fort Worth Minority and Women Business Enterprise Specifications MBE/WBE UTILIZATION p ecy)ai5C� CtOr�`�r�Lfion r1L l 1<aS/ PRIME COMPANY NAME BID DAT M-390 SS REHAB & IMPRVMNTS (GRP 6, CT 1), PT 8 UNT 1 PROJECT NAME CITY'S M/WBE PROJECT GOAL: 19% PS46-070460 DOE NO. 1828 PROJECT NUMBER N11WBE PERCENTAGE ACHIEVED: Failure to complete this form, in its entirety with supporting documentation, and received by the Managing Department on or before 5:00 p.m. five (5) City business days after bid opening, exclusive of bid opening date, will result in the bid being considered non -responsive to bid specifications. The undersigned bidder agrees to enter into a formal agreement with the MBE and/or WBE firms for work listed in this schedule, conditioned upon execution of a contract with the City of Fort Worth. The intentional and/or knowing misrepresentation of facts is grounds for consideration of disqualification and will result in the bid being considered non -responsive to specifications. Company Name, Contact Name, Certified Specify All Contracting Specify Al! Items to be Dollar Amount Address, and Telephone No. Scope of Work (*) Supplied(*) a V -.2 O p X Q N Cl) Z F = ✓ tLr, elit Ere & /�j� ecTh x 12c227 24, 2 7 28, si. Se ect`' 4 4 � z s 33 3 I �f LfaoU� MWWBEs must be located in the 9 (nine) county marketplace or currently doing business in the marketplace at the time of bid. (*) Specify all areas in which MWBE's are to be utilized and/or items to be supplied: ) A complete listing of items to be supplied is required in order to receive credit toward the M/WBE goal. ") Identify each Tier level. Tier: Means the level of subcontracting below the prime contractor/consultant, i.e., a direct payment from the prime contractor to a subcontractor is considered 1tier, a payment by a subcontractor to its supplier is considered 2nd tier. THIS FORM MUST BE RECEIVED BY THE MANAGING DEPARTMENT BY 5:00 p.m., FIVE (5) CITY BUSINESS DAYS AFTER BID OPENING, EXCLUSIVE OF THE BID OPENING DATE Rev. 612198 Pages 1 and 2 of Attachment 1A must be received by the Managing Department M-390, PART 8- UNIT 1 B-3 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1A Page 2 of 2 City of Fort Worth Minority and Women Business Enterprise Specifications MBE/WBE UTILIZATION Company Name, Contact Name, Address, and Telephone No. I Certified Specify All Contracting Scope of Work (*) Specify All Items to be Supplied(*) U L CL d U) F- Dollar Amount a U Z O o X 2 I.55%m La,1e ✓ TV .znsp e r -A' ova �r�S 3S d- 3fP o s ''I S y � l The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed by all subcontractors, including MBE(s) and/or WBE(s) arrangements submitted with this bid. i"he bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed by the MBE(s) and/or WBE(s) on this contract, by an authorized officer or ;mployee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the contract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material )reach of contract may result in a determination of an irresponsible offeror and barred from participating in City work or a period of time not less than one (1) year. MB s MUST BE CERTIFIED BY THE CITY BEFORE CONTRACT AWARD Authoriz Signature Printed Signa ure es',rieL1A SCL1�'1 e.. -itle Contact Name and Title (if different) -Doa4Ser SAS r-��n=nc.. (I7 5341- 174 ' ompany Name T lephone Number (s) Po ItEN i ) 53 -L15 40 Address Fax Number ity/State/Zip Code Date THIS FORM MUST BE RECEIVED BY THE MANAGING DEPARTMENT BY 5:00 p.m., FIVE (5) CITY BUSINESS DAYS AFTER BID OPENING, EXCLUSIVE OF THE BID OPENING DATE Rev. 6/2198 Pages 1 and 2 of Attachment 1A must be received by the Managing Department A-390, PART 8— UNIT I B-4 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1 Page 1 of 1 City of Fort Worth Minority and Women Business Enterprise Specifications Prime Contractor Waiver Prime Company Name Bid Opening Date M-390 SS REHAB & IMPRVMNTS (GRP 6, CT 1). PT 8 UNT 1 Project Name PS46-070460 DOE NO. 1828 Project Number If both answers to this form are YES, do not complete ATTACHMENT 1C(Good Faith Effort Form). All questions on this form must be completed and a detailed explanation provided, if applicable. If the answer to either question is NO, then you must complete ATTACHMENT 1C. This form is only applicable if both answers are yes. Failure to complete this form in its entirety and be received by the Managing Department on or before 5:00 p.m., five (5) City business days after bid opening, exclusive of the bid opening date, will result in the bid being considered non -responsive to bid specifications. Will you perform this entire contract without subcontractors? Yes No If yes, please provide a detailed explanation that proves based on the size and scope of this project, this is your normal business practice and provide an operational profile of your business. Will you perform this entire contract without suppliers? Yes No If yes, please provide a detailed explanation that proves based on the size and scope of this project, this is your normal business practice and provide an inventory profile of your business. The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed by all subcontractors, including MBE(s) and/or WBE(s) on this contract, the payment therefore and any proposed changes to the original MBE(s) and/or WBE (s) arrangements submitted with this bid. The bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed by the MBE(s) and/or WBE(s) on this contract, by an authorized officer or employee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the contract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material breach of contract may result in a determination of an irresponsible offeror and barred from participating in City work for a period of time not less than one (1) year. Authorized Signature Title Company Name Address Printed Signature Contact Name (if different) Contact Telephone Number (s) Fax Number Rev. 6/2/98 M-390, PART 8- UNIT 1 B-5 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1CPage 1 of 3 City of Fort Worth Minority and Women Business Enterprise GOOD FAITH EFFORT 0-o n l,1-�._ s e Y" QL ►'1 <4 y uc+ I Ca n -L rlr .ftG 1 1 q9 Prime Company Name Bid Date M-390 SS REHAB & IMPRVMNTS (GRP 6 CT 1) PT 8 UNT I PS46-070460 DOE NO. 1828 Project Name Project Number If you have failed to secure MIWBE participation and you have subcontracting and/or supplier opportunities or if your M/WBE participation is less than the City's project goal, you must complete this form. If the bidder's method of compliance with the MIWBE goal is based upon demonstration of a "good faith effort", the bidder will have the burden of correctly and accurately preparing and submitting the documentation required by the City. Compliance with each item, 1 thru 6 below, shall satisfy the Good Faith Effort requirement absent proof of fraud, intentional and/or knowing misrepresentation the facts or intentional discrimination by the bidder. Failure to complete this form, in its entirety with supporting documentation, and received by the Managing Department on or before 5:00 p.m. five (5) City business days after bid opening, exclusive of bid opening date, will resultin the bid being considered non -responsive to bid specifications. 1.) Please list each and every subcontracting and/or supplier opportunity (DO NOT LIST NAMES OF FIRMS) which will be used in the completion of this project, regardless of whether it is to be provided by a M/WBE or non- M/WBE. (Use additional sheets, if necessary) List of: Subcontracting Opportunities List of: Supplier Opportunities w ar^ Sewer _ 1,'t?5 Rev. 6/2/98 M-390, PART 8 - UNIT 1 B-6 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1CPage 2 of 3 2.) Did you obtain a current list of MIWBE firms from the City's MIWBE Office? The list is considered in compliance, if it is not more than 3 months old from the date of bid opening. I h^ Yes No Date of Listing 41 /i,L /Q 3.) Did you solicit bids from M/WBE firms, within the subcontracting and/or supplier areas previously listed, at least ten calendar days prior to bid opening by mail, exclusive of the day the bids are opened? Yes If yes, attach M/WBE mail listing to include name of firm and address and a dated No copy of letter mailed. 4.) Did you solicit bids from M/WBE firms, within the subcontracting and/or supplier areas previously listed, at least ten calendar days prior to bid opening by telephone, exclusive of the day the bids are opened? Yes If yes, attach list to include name of M/WBE firm, person contacted, No phone number and date and time of contact. NOTE: A facsimile may be used to comply with either 3 or 4, but may not be used for both. If a facsimile is used, attach the fax confirmation, which is to provide MIWBE name, date, time, fax number and documentation faxed. NOTE: If a SIC list of MIWBE is ten or less, the bidder must contact the entire list to be in compliance with questions 3 and 4. If a sic list of M/WBE is more than ten, the bidder must contact at least two-thirds of the list but not less than ten to be in compliance with questions 3 and 4. 5.) Did you provide plans and specifications to potential M/WBEs or information regarding the location of plans and specifications in order to assist the M/WBEs? ✓ Yes No 6.) If M/WBE bids were received and rejected, you must: (1) List the M/WBE firms and the reason(s) for rejection (i.e., quotation not commercially reasonable, qualifications, etc.) and (2) Attach affidavit and/or documentation to support the reason(s) listed below (i.e.. letters, memos, bids, telephone calls, meetings, etc.) /Please use additional sheets_ if nereccary and attach I Company Name Telephone Contact Person Scope of Work Reason for Rejection -See. 4* ch ecl ,- Rev. 6/2/98 M-390, PART 8 - UNIT 1 B-7 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1, PS46-070460410280 DOE NO. 1828 ATTACHMENT 1CPage 3 of 3 ADDITIONAL INFORMATION: Please provide additional information you feel will further explain your good and honest efforts to obtain MIWBE participation on this project. The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed on this contract, the payment thereof and any proposed changes to the original arrangements submitted with this bid. The bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed on this contract, by an authorized officer or employee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the contract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material breach of contract may result in a determination of an irresponsible offeror and barred from participating in City work for a period of time not less than one (1) year. The undersigned certifies that the information provided and the M/WBE(s) listed was/were contacted in good faith. It is understood that any M/WBE(s) listed in Attachment IC will be contacted and the reasons for not using them will be verified by the City's M/WBE O ice. tjiWe. e V- ori d Signature Printed Sig ature Title Contact Name and Title (if different) Company Name Telephone Number(s) Pc 8L K 717) 531- `�55 I Address Fax Number City/State/Zip Date M-390, PART 8- UNIT 1 B-8 Rev. 6/2/98 0 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1 PS -070460410280 DOE NO. 1828 (. TO: Bob Terrell, City Manager, Fort Worth, Texas From: (Bidders Name na+SCX ConS"t(UC} iz)r),IjC fl Address: ?0 ��-f PO( O � -1� . ( PROPOSAL FOR: the furnishing of all materials except materials specified to be furnished by the City, equipment and labor for the installation of water and sanitary sewer improvements, and all necessary appurtenances and incidental work to provide a complete and serviceable project identified as: fl MAIN 390 Li DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS 0 (GROUP 6, CONTRACT 1), PART 8, UNIT I SEWER PROJECT NO. PS -070460410280 DEPARTMENT OF ENGINEERING PROJECT NO. 1828 The major work on this project shall consist of: UNIT 1: 2991 LF 8" diameter PVC Sanitary Sewer Pipe 404 LF 8" diameter DIP Sanitary Sewer Pipe 238 LF 8" diameter HDPE Sanitary Sewer Pipe 22 LF Sag Adjustment for Pipe Enlargement 901 LF 8" DIP By Method Other Than Open Cut Qfl 1561 LF Trench Safety System 18 EA Standard 4' diameter Sanitary Sewer Manhole 1 34 EA 4' diameter Drop Sanitary Sewer Manhole VF Additional Depth Over 6 -Feet Standard Sanitary Sewer Manhole 14 VF Additional Depth Over 6 -Feet for Drop Sanitary Sewer Manhole 638 LF 4 -Inch PVC Sanitary Sewer Service Line fl 1100 LF 4 -Inch DIP Sanitary Sewer Service Line 4017 LF Permanent HMAC Pavement Repair (Per fig. 4) a And all necessary appurtenances and incidental work to provide a complete and serviceable project. Pursuant to the foregoing "Notice to Bidders", the undersigned Bidder, having thoroughly examined the Contract Documents, including plans, specifications, and site of the project, understanding the amount of work to be done, hereby proposes to do all the work and furnish all labor, equipment, and material necessary to fully complete the work as provided in the Plans and Specifications, and subject to the inspection of the Department of Engineering of the City of Fort Worth. Upon acceptance of this Proposal by the City Council, The bidder is bound to execute a contract and furnish Performance, Payment and Maintenance Bonds approved by the City of Fort Worth for performing ry and completing the said work within the time stated for the following sums to -wit: 0 0 PART — B PROPOSAL B-9 I aMAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1 ci PS -070460410280 DOE NO. 1828 (Furnish and install, including all appurtenant work, complete in place, the following items) (D -No. refers ( to specifically related items in the Part D Special Conditions, all Special Conditions apply:) ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 1. 2,991 LF *8 -Inch PVC Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: /4? 4 e'e4h-L Dollars and no Cents $5€. oo $ 1-76,4411e. oo 2. 404 LF 8 -Inch DIP Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: 5'cY-4u •I ye, Dollars and Me Cents $ (.00 $ Z(�, Zrpo. w 3. 21 LF **8 -Inch HDPE Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; fl Per Linear Foot: Seyery Dollars and rLo Cents $70. rra $ 1, c' -'/o. 00 4. 217 LF **6 to 8 -Inch Sanitary Sewer Rehabilitation By Pipe Enlargement Method, D-49, D-56, D-71, DA-2;Per Linear Foot: fl D,^ef4U'#'Ld reo( Dollars U. and rt,o Cents $100.027 $ Zf,700. t!0 II 5. 22 LF Sanitary Sewer Rehabilitation Pipe Sag Elimination, D-49, D-56, D-71, D-21, DA-5;Per Linear Foot: Stx-AV AVy- Dollars and no Cents $ lv5.0o $ /, '30.00 6. 901 LF 8 -Inch DIP Sanitary Sewer Pipe; By Method Other Than Open Cut, D-49, D-56, D-71, DA-2;Per Linear Foot: 7I rea Nu,sc reoC r ar4 Dollars and Cents $340-00 $-10(" '4o.00 a7. 1,561 LF Trench Safety System, D-51; Per Linear Foot: aand DK a Dollars ra.o Cents $ 1.00 $ 1, 5 1.00 8. 11 EA Remove Existing Sewer Manhole, D-55; Per Each: a SeVe.i 0"*i&recl Dollars and VI. -o Cents $ '?SO. oo $ 8,50, 00 9. 1 EA Exploratory Excavation (D_Hole), Dfl D-79; Per Each: op.e 1Vta usa,nd Dollars and ►'to Cents $ soon. oo $/,000.co * and ** Contractor shall complete City approved Product and Method Forms on Page 6 PART — B PROPOSAL B-10 0 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP'6, CONTRACT 1), PART 8, UNIT 1 PS -070460410280 DOE NO. 1828 ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 10. 2 EA Abandon Existing Standard 4 -Foot Manhole; D-55; Per Each: UoI-Lvtdred FFv Dollars and l__ Cents $ 750. oo $ f, Soo. 00 11. 18 EA Standard 4 -Foot Diameter Manhole to 6 Feet Depth, Fig. 103, D-52; Per Each: r� DKe %wuSaytd five, gu. &d(2bollars and Vl.o Cents $ I, COO. ov $ 27, 000.00 12. 1 EA 4 -Foot Diameter Drop Manhole to 6 Feet Sep, Fig. 107, D-52; Per Each: Iwo TkousaM.d Dollars and VLO Cents $ , Ooo . oa $ Z, 000. 00 13. 34 VF Additional Depth Over 6 -Feet For Standard 4- Foot Diameter Sanitary Sewer Manhole; D-52; Per Vertical Foot: e.. 6i u,"reJTWe4N Dollars andyt-o Cents $ / 20. ov $ 0 080. Dn 14. 14 VF Additional Depth Over 6 -Feet For 4 -Foot Diameter Drop Sanitary Sewer Manhole; D-52; Per Vertical Foot: oy1.d 6-lu.-crec1 Iik1 Dollars and _________________Cents $ /go. oo $ 1, 96O. c 15. 19 EA Manhole Insert for Standard 4 -Foot Diameter Man ole, D-52; Per Each: Se1Jei'L4z1 hve Dollars and Cents $ '75. oo $ 1, 1. co 16. 19 EA Concrete Collar FFii . 121, D-52; Per Each: "Iwo 1uMdred Dollars and Vtro Cents $ 250. 00 $ 4, 750, aD 17. 7 VF Sanitary Sewer Manhole Corrosion Resistant ,-' Coating for 4- Foot Diameter Sanitary Sewer Manhole; DA -7; Per Vertical Foot: -1 io {wvidred TWevt,4ye. Dollars and ►stn Cents $ 2ZS.0,p $ I, 575, e� 18. 19 EA Vacuum Test Sanitary Sewer Manhole; D-63; Per Each: St ue,ti.•1,, -(z',' i Dollars and ✓L•o Cents $_'7_, eo $ i, 5F 25. oD 19. 67 EA Install 4 -Inch Sanitary Sewer Service Tag.• D-53; Per Each: f ,- i-k&w.ctred Dollars and n,n Cents $ 400. o -n $ 4, 800.00 PART - B PROPOSAL B-11 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1 PS -070460410280 DOE NO. 1828 (. ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL fl NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT fJ 20. 638 LF Install 4 -Inch Sanitary Sewer Service Line From Service Tap to ROW; D-53; Per Linear Foot: LI rhj +W o Dollars and O'D Cents $ 3 2. co $ zO, 4W . oD 21. .8 TON Install 4 -Inch DIP Sanitary Sewer Service Tap; D-53; Per Ton: LL /1JMe- Thbi : Oa yd { 'PGyollars and ✓LO Cents $ , OD. ''o $ 7, 600. oc 22. 1,100 LF Install 4 -Inch DIP Sanitary Sewer Service Line From Service Tap to ROW; D-53; Q Per Linear Foot: LC SG OC Dollars and vo Cents $ /D . Qi $ 3 (oo. aro a23. 2 EA Install 4 -Inch Sanitary Sewer Service Tap for Service Reconnection of Pipe by ri Pipe Enlargement Method; D-53; Per Each: te— Th& u.a -d Dollars and ✓LD Cents $ f, o?N . bU $ Z, Doo. aO 24. 15 CY Flowable Fill Grout for Miscellaneous Placement as Directed by the Engineer, D-45; Per Cubic Yard 5Gri Dollars and Cents $ 60. OD $ 9ov. ot, 25. 15 CY Crushed Limestone for Miscellaneous fl Placement as Directed by the Engineer, D-45; Per Cubic Yard {ye. Dollars D26. and VLo Cents $ 5.6-a $ 75.00 15 CY Ballast Stone for Miscellaneous Placement as Directed by the Engineer, fl D-45; Per Cubic Yard �Ve_ Dollars •and Yt.n Cents $ 5.01) $ _7.CZ' 27. 15 CY Class 'E' Concrete(1500#) for Miscellaneous Placement as Directed by the Engineer, D-45; Per Cubic Yard e A_ Dollars and Cents $10.110 $ 150.0"0 28. 15 CY Class 'B' Concrete(2500#) for Miscellaneous Placement as Directed by the Engineer, afl D-45; Per�.ubic Yard Dollars and h...o Cents $ to .CO $ I 5o. oO PART — B PROPOSAL B-12 a MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1 PS -070460410280 DOE NO. 1828 ( ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO, QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 29. 81 SY Concrete Sidewalk and Driveway Replacement, D-44, Per Square Yard: Q /r.h Dollars and VLo Cents $ CFO. UU $ 3, 2co. o -O fl 30. 83 LF Concrete Curb and Gutter Replacement, DA -21, Per Linear Foot: wevi i� -fw a Dollars fl and vt n Cents $ Z Z . Un $ 1, 8 24..0t) 31. 4,017 LF Permanent HMAC Pavement Repair, Per TPW Fig. 4 to match existing fl construction, D-50, Per Linear Foot: Dollars __ and Vt-o Cents $ i/o. btu $ /CQ0,(080.00 fl 32. 575 SY 4 -Inch Topsoil Replacement, D-73, Per Square Yard: G2 �_ Dollars fland cdec Cents $ /.Utz $ 575.00 LI 33. 648 LF Bermuda or St. Augustine Solid Sodding, D-73; Per Linear Foot: i q h. -t- Dollars and ryo Cents $ S. ba $ 5, / 8 4.190 34. 425 LF Hydro Mulch Seeding, D-73; Per Linear Foot: LI NO Dollars and f'{rr Cents $ 0.So $ ZIZ.So fl 35. 1591 LF Pre -Construction Television Inspection, of Sanitary Sewer, D-62; Per Linear Foot: TiU Dollars fland Cents $ Z. SO $3L'I '?. So 36. 4579 LF Post Construction Television Inspection of Sanitary Sewer, D-65; Per Linear Foot: t Dollars and Cents $ /•SO $ Total Amount Bid Unit 1: $ 8' 'Z S . Total Amount Bid Unit 1: in Writing $ Ahf c/red 54 Serb %11otlS&t7a /7 k, e, cdred ` ;,/ A. -e P. i `ta i- U. PART - B PROPOSAL 0 B-13 0 0 0 0 0 0 I 0 I I D 0 0 0 0 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT I PS -070460410280 DOE NO. 1828 Note: A BID MAY BE SUBMITTED ON UNIT 1, UNIT 2, UNIT 3, UNIT4, OR ANY COMBINATION OF THE FOUR UNITS, AT THE CONTRACTOR'S OPTION BIDDER OF UNIT 1 MUST COMPLETE GOCUMENOLk PAGES x31O S w►v�n� e ,PAGC e> -:l CITY APPROVED METHOD AND APPROVED PRODUCTS FOR * AND ** * CONTRACTOR SHALL SELECT TYPE OF PIPE TO BE USED: Standard Spec. No. E1-31 E1-25 ___________El -27 El -28 E100-2 Size 4" THRU 30" 4" THRU 15" 4" THRU 15" 18" THRU 27" 18" THRU 48" Consult the "City of Fort Worth, Texas Standard Product List" to obtain the Generic/Trade Name and the Manufacturer for the pipes listed above. CITY APPROVED METHOD FOR ** ** CONTRACTOR SHALL SELECT PIPE ENLARGEMENT METHOD TO BE USED AND PROVIDE NAME OF CONTRACTOR FOR INSTALLATION: L PIM METHOD T.R.S. SYSTEM McCONNELL METHOD EXPANDED SYSTEM //4'C -/,11 S�27 , i14.-' Name of Subcontractor if Applicable Name of Subcontractor if Applicable Name of Subcontractor If Applicable Name of Subcontractor If Applicable Failure to provided the information required above may result in rejection of bid as non -responsive. Only products or methods listed above will be. allowed for use in this project. Any substitution shall result in the rejection of bid as non -responsive. PART — B PROPOSAL I B-14 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 1 LIPS -070460410280 DOE NO. 1828 Within ten (10) days after notification by the City, the undersigned will execute the formal contract and will deliver an approved Surety Bond and such other bonds as required by the Contract Documents, for the fl faithful performance of this contract. The attached bid security in the amount of 5% is to become the property of the City of Fort Worth, Texas, in the event the contract and bond or bonds are not executed and delivered within the time above set forth, as liquidated damages for the delay and additional work caused thereby. The undersigned bidder certified that he has been furnished at least one set of the General Contract Documents and General Specifications for Water Department Projects dated January 1, 1978, and that he has read and thoroughly understands all the requirements and conditions of those General Documents a and the specific Contract Documents and appurtenant plans. The undersigned assures that its employees and applicants for employment and those of any labor organization, subcontractors, or employment agency in either furnishing or referring employee applicants to the undersigned are not discriminated against as prohibited by the terms of City Ordinance No. 7278 as amended by City Ordinance No. 7400. (Complete A or B below, as applicable:) • A. The principal place of business of our company is in the State of Nonresident bidders in the State of , our principal place of business, are required to be percent lower than resident bidders by state law. A copy of the statue is attached. Nonresident bidders in the State of , our principal place of / business, are not required to underbid resident bidders. V B. The principal place of business of our company or our parent company or majority owner is in the State of Texas. This contract is issued by an organization which qualifies for exemption pursuant to the provisions of Article 20.04 (F) of the Texas Limited Sales, Excise and Use Tax Act. All Equipment and materials not consumed by or incorporated into the project. construction, are subject to State sales taxes under house Bill 11, enacted August 15, 1992. The successful Bidder shall be required to complete the attached Statement of Materials and Other Charges contractor at the time of executing the contract. The Bidder agrees to begin construction within ten (10) working days after issue of the work order, and to complete the contract within: fl Unit 1 — ninety (90) calendar days Unit 2— one hundred twenty (120) calendar days Unit 3 — ninety (90) calendar days Unit 4 —one hundred twenty (120) calendar days fl after beginning construction as set forth in the written work order to be furnished by the Owner. This document is designed as four (4) separate contract documents and proposals shall not be construed as being a package. The proposal Sections are designed as four (4) separate proposals and are arranged in Units to allow the Contractor to submit a bid on one, two, three or all four units. Contracts will be awarded to the responsible, responsive low bidder for each of the four Units. If the Contractor only submits a bid on one proposal and is the lowest proposed price total, the Contractor will be the apparent n successful bidder for the individual proposal Unit. Contractors may bid on any or all of the four Units. Time on all units awarded will run concurrently. If the Contractor is low bidder on more than one unit, the U Contractor's time for all units awarded to him will be the longest time allowed for any single unit awarded to the Contractor.D I (we), acknowledged receipt of the following addenda to the plans and specifications, all of the provisions and requirements of which have ben taken into consideration in preparation of the foregoing bid: Addendum No. 1 (Initials)/ Respectively submitted, Addendum No. 2 (Initials) fl Addendum No. 3 (Initials)/ &'- aSr- tov� s)ruc 1 .rr.e. U Addendum No. 4 (Initials)/ By: s�de�t fl Address: P o. i4ox iBo¢ (SEAL) 62161- INoru , T2 mug 119 Date: —S/^7 7/ % Telephone: S/'7 5"3'f- i'7 4f3 a PART — B PROPOSAL, UNIT 1 B-15 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 City of Fort Worth Minority and Women Business Enterprise Specifications SPECIAL INSTRUCTIONS FOR BIDDERS APPLICATION OF POLICY If the total dollar value of the contract is $25,000 or more, the M/WBE goal is applicable. If the total dollar value of the contract is less than $25,000, the M/WBE goal is not applicable. POLICY STATEMENT It is the policy of the City of Fort Worth to ensure the full and equitable participation by Minority/Women Business Enterprises (M/WBE) in the procurement of all goods and services to the City on a contractual basis. The objective of the Policy is to increase the use of M/WBE firms to a level comparable to the availability of M/WBEs that provide goods and services directly or indirectly to the City. M/WBE PROJECT GOALS The City's MBE/WBE goal on this project is 24% of the base bid value of the contract. COMPLIANCE TO BID SPECIFICATIONS On City contracts of $25,000 or more, bidders are required to comply with the intent of the City's M/WBE Ordinance by either of the following: 1. Meet or exceed the above stated M/WBE goal, or; 2. Good Faith Effort documentation, or; 3. Waiver documentation. SUBMITTAL OF REQUIRED DOCUMENTATION The applicable documents must be received by the Managing Department, within the following times allocated, in order for the entire bid to be considered responsive to the specifications. 1. M/WBE Utilization Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. 2. Prime Contractor Waiver Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. 3. Good Faith Effort Form: received by 5:00 p.m., five (5) City business days after the bid opening date, exclusive of the bid opening date. FAILURE TO COMPLY WITH THE CITY'S M/WBE ORDINANCE, WILL RESULT IN THE BID BEING CONSIDERED NON -RESPONSIVE TO SPECIFICATIONS. Any questions, please contact the M/WBE Office at (817) 871-6104. Rev. 6/2/98 M-390, PART 8- UNIT 4 B-46 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 ATTACHMENT 1A Page 1 of 2 City of Fort Worth Minority and Women Business Enter rise Specifications MBE/WBE UTILIZATION p ConeisP rConsicao-t-1'on Inc 'RIME COMPANY NAME N-390 SS REHAB & IMPRVMNTS (GRP 6. CT 1) PT 8. UNT 4 PROJECT NAME CITY'S M/WBE PROJECT GOAL: 24% 1 1k'J a -7 /99 BID DATE PS46-070460 DOE NO. 2528 PROJECT NUMBER M/WBE PERCENTAGE ACHIEVED: Failure to complete this form, in its entirety with supporting documentation, and received by the Managing Department )n or before 5:00 p.m. five (5) City business days after bid opening, exclusive of bid opening date, will result in the bid )eing considered non -responsive to bid specifications. The undersigned bidder agrees to enter into a formal agreement with the MBE and/or WBE firms for work listed in this schedule, conditioned upon execution of a contract with the City of Fort Worth. The intentional and/or knowing misrepresentation of facts is grounds for consideration of disqualification and will result in the bid being considered non -responsive to specifications. Company Name, Contact Name, Certified Specify All Contracting Specify All Items to be Dollar Amount Address, and Telephone No. Scope of Work (*) Supplied(*) < I-.? I- CL d Z = N4 /q 5 re5 CJeJ SS �1�Gu 1/a �iay� 1 �O Z p D 87 - 3CC l V e e. / - c,�,s Z3, z4, z'i, Z r/ 2.9 3o, 3I,3. , �t j 6 L!- `6 0 Gd rll € 4'7 3 c{ i - 2- M/WBEs must be located in the 9 (nine) county marketplace or currently doing business in the marketplace at the time of bid. Specify all areas in which MWBE's are to be utilized and/or items to be supplied: A complete listing of items to be supplied is required in order to receive credit toward the M/WBE goal. **) Identify each Tier level. Tier: Means the level of subcontracting below the prime contractor/consultant, i.e., a direct payment from the prime contractor to a subcontractor is considered 1'` tier, a payment by a subcontractor to its supplier is considered 2nd tier. THIS FORM MUST BE RECEIVED BY THE MANAGING DEPARTMENT BY 5:00 p.m., FIVE (5) CITY BUSINESS DAYS AFTER BID OPENING, EXCLUSIVE OF THE BID OPENING DATE 6 Rev. 6/2198 Pages 1 and 2 of Attachment 1A must be received by the Managing Department A-390, PART 8- UNIT 4 B-47 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 I ATTACHMENT 1A Page 2 of 2 City of Fort Worth Minority and Women Business Enterprise Specifications MBE/WBE UTILIZATION Company Name, Contact Name, Address, and Telephone No. Certified Specify All Contracting Scope of Work (*) Specify All Items to be Supplied(*) CL V) F- Dollar Amount F U Z 00 o X F1 ✓ fi✓ P���zQ,-, 6� Grr�c5 5 3ro r 31 / Sf- vC �� p6 D '7 2 ' Z6 - 33 l� +3SL The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed by all subcontractors, including MBE(s) and/or WBE(s) arrangements submitted with this bid. The bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed by the MBE(s) and/or WBE(s) on this contract, by an authorized officer or amployee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the :ontract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material )reach of contract may result in a determination of an irresponsible offeror and barred from participating in City work or a period of time not less than one (1) ear. s - ST BE CERTIFIED BY THE CITY B ORE CONTRACT AWARD A rized gnature Printed Sig ature Title Contact Name and Title (if different) C►nck e r Ppns1I-uL1 4- ;ompanyame Telephone�Number (s)`K1�]) 3of Ad�c,ress Fax Number :'ity/State/Zip Code Date THIS FORM MUST BE RECEIVED BY THE MANAGING DEPARTMENT BY 5:00 p.m., FIVE (5) CITY BUSINESS DAYS AFTER BID OPENING, EXCLUSIVE OF THE BID OPENING DATE Rev. 6/2/98 Pages 1 and 2 of Attachment 1A must be received by the Managing Department VI -390, PART 8— UNIT 4 B-48 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT4, PS46-070460410280 DOE NO. 2528 ATTACHMENT 1 Page 1 of 1 City of Fort Worth Minority and Women Business Enterprise Specifications Prime Contractor Waiver Prime Company Name M-390 SS REHAB & IMPRVMNTS (GRP 6, CT 1), PT 8, UNT 4 Project Name PS46-070460 DOE NO. 2528 Bid Opening Date Project Number If both answers to this form are YES, do not complete ATTACHMENT 1 C(Good Faith Effort Form). All questions on this form must be completed and a detailed explanation provided, if applicable. If the answer to either question is NO, then you must complete ATTACHMENT 1C. This form is only applicable if both answers are yes. Failure to complete this form in its entirety and be received by the Managing Department on or before 5:00 p.m., five (5) City business days after bid opening, exclusive of the bid opening date, will result in the bid being considered non -responsive to bid specifications. Will you perform this entire contract without subcontractors? Yes No If yes, please provide a detailed explanation that proves based on the size and scope of this project, this is your normal business practice and provide an operational profile of your business. Will you perform this entire contract without suppliers? Yes No If yes, please provide a detailed explanation that proves based on the size and scope of this project, this is your normal business practice and provide an inventory profile of your business. The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed by all subcontractors, including MBE(s) and/or WBE(s) on this contract, the payment therefore and any proposed changes to the original MBE(s) and/or WBE (s) arrangements submitted with this bid. The bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed by the MBE(s) and/or WBE(s) on this contract, by an authorized officer or employee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the contract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material breach of contract may result in a determination of an irresponsible offeror and barred from participating in City work for a period of time not less than one (1) year. Authorized Signature Title Company Name Address Printed Signature Contact Name (if different) Contact Telephone Number (s) Fax Number Rev. 6/2/98 M-390, PART 8 - UNIT 4 B-49 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 ATTACHMENT 1 C Page 1 of 3 City of Fort Worth Minority and Women Business Enterprise GOOD FAITH EFFORT �nnca-��e�Cn��fruc-�I'�r� --1 Inc1flj Iq9 Prime Company Name Bid Date( M-390 SS REHAB & IMPRVMNTS (GRP 6. CT 1), PT 8. UNT 4 Project Name PS46-070460 DOE NO. 2528 Project Number If you have failed to secure M/WBE participation and you have subcontracting and/or supplier opportunities or if your M/WBE participation is less than the City's project goal, you must complete this form. If the bidder's method of compliance with the M/WBE goal is based upon demonstration of a "good faith effort", the bidder will have the burden of correctly and accurately preparing and submitting the documentation required by the City. Compliance with each item, 1 thru 6 below, shall satisfy the Good Faith Effort requirement absent proof of fraud, intentional and/or knowing misrepresentation the facts or intentional discrimination by the bidder. Failure to complete this form, in its entirety with supporting documentation, and received by the Managing Department on or before 5:00 p.m. five (5) City business days after bid opening, exclusive of bid opening date, will result in the bid being considered non -responsive to bid specifications. 1.) Please list each and every subcontracting and/or supplier opportunity (DO NOT LIST NAMES OF FIRMS which will be used in the completion of this project, regardless of whether it is to be provided by a M/WBE or non- M/WBE. (Use additional sheets, if necessary) List of: Subcontracting Opportunities List of: Supplier Opportunities bilaJer >` Fewer J�,�e Rev. 612198 M-390, PART 8 - UNIT 4 B-50 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 l.. ATTACHMENT 1C Page 1 of 3 2.) Did you obtain a current list of MIWBE firms from the City's MIWBE Office? The list is considered in compliance, if it is not more than 3 months old from the date of bid opening. Yes Date of Listing /i'' /' No 3.) Did you solicit bids from MIWBE firms, within the subcontracting and/or supplier areas previously listed, at least ten calendar days prior to bid opening by mail, exclusive of the day the bids are opened? V Yes If yes, attach MIWBE mail listing to include name of firm and address and a dated No copy of letter mailed. 4.) Did you solicit bids from M/WBE firms, within the subcontracting and/or supplier areas previously listed, at least ten calendar days prior to bid opening by telephone, exclusive of the day the bids are opened? v/Yes If yes, attach list to include name of M/WBE firm, person contacted, No phone number and date and time of contact. NOTE: A facsimile may be used to comply with either 3 or 4, but may not be used for both. If a facsimile is used, attach the fax confirmation, which is to provide MIWBE name, date, time, fax number and documentation faxed. r NOTE: If a SIC list of M/WBE is ten or less, the bidder must contact the entire list to be in compliance with questions 3 and 4. If a sic list of MIWBE is more than ten, the bidder must contact at least two-thirds of the list but not less than ten to be in compliance with questions 3 and 4. 5.) Did you provide plans and specifications to potential MIWBEs or information regarding the location of plans and specifications in order to assist the MIWBEs? Zs No 6.) If MIWBE bids were received and rejected, you must: (1) List the M/WBE firms and the reason(s) for rejection (i.e., quotation not commercially reasonable, qualifications, etc.) and (2) Attach affidavit and/or documentation to support the reason(s) listed below (i.e.. letters, memos, bids, telephone calls, meetings, etc.) IPfr,. cp its arlflitinnal Sh PP}c if narPccary and aHarh L Company Name Telephone Contact Person Scope of Work Reason for Rejection See M-kcbed L er— M-390, PART 8 - UNIT 4 B-51 Rev. 6/2/98 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4, PS46-070460410280 DOE NO. 2528 ATTACHMENT 1C Page 1 of 3 ADDITIONAL INFORMATION: Please provide additional information you feel will further explain your good and honest efforts to obtain MIWBE participation on this project. The bidder further agrees to provide, directly to the City upon request, complete and accurate information regarding actual work performed on this contract, the payment thereof and any proposed changes to the original arrangements submitted with this bid. The bidder also agrees to allow an audit and/or examination of any books, records and files held by their company that will substantiate the actual work performed on this contract, by an authorized officer or employee of the City. Any intentional and/or knowing misrepresentation of facts will be grounds for terminating the contract or debarment from City work for a period of not less than three (3) years and for initiating action under Federal, State or Local laws concerning false statements. Any failure to comply with this ordinance and creates a material breach of contract may result in a determination of an irresponsible offeror and barred from participating in City work for a period of time not less than one (1) year. The undersigned certifies that the information provided and the MIWBE(s) listed was/were contacted in good faith. It is understood that any M/WBE(s) listed in Attachment 1C will be contacted and the reasons for not using them will be verified by the City' M/WBE Office. th iz d Si nature Printed Sig1nature ��� I d n l ►�r� P Title Contact Name and Title (if different) - 17' Company Name P��// Telephone Number(s) u / O. bo/� \D Address Fax Number City/StatelZip a)1/99cy Date IM-390, PART 8- UNIT 4 B-52 Rev. 6/2/98 MAIN 390 DRAINAGE AREA SANITARY SEWER SY STEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 aPS -070460410280 DOE NO. 2628 TO: Bob Terrell, City Manager, Fort Worth, Texas From: (Bidders Namej Q y(1S4,a ion,=r7C. fl U Address: p fccPROPOSAL FOR: the furnishing of all materials except materials specified to be furnished by the City, equipment and labor for the installation of water and sanitary sewer improvements, and all necessary appurtenances and incidental work to provide a complete and serviceable project identified as: 0 LI 0 D 0 0 0 0 ci I Ii 0 ci F' PART — B PROPOSAL, UNIT 4 0 B-53 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 SEWER PROJECT NO. PS -070460410280 DEPARTMENT OF ENGINEERING PROJECT NO. 2528 The major work on this project shall consist of: UNIT 4: 5146 LF 8" diameter PVC Sanitary Sewer Pipe 2069 LF 8" diameter DIP Sanitary Sewer Pipe 320 LF 8" diameter HDPE Sanitary Sewer Pipe 4114 LF Trench Safety System 31 EA Standard 4' diameter Sanitary Sewer Manhole 2 EA Shallow Cone Sanitary Sewer Manhole 13 VF Additional Depth Over 6 -Feet Standard Sanitary Sewer Manhole 2408 LF 4 -Inch PVC Sanitary Sewer Service Line 3053 LF 4 -Inch DIP Sanitary Sewer Service Line 5524 LF Permanent HMAC Pavement Repair (Per fig. 4) 299 LF Permanent Concrete Pavement Repair (Per fig. 1) 4373 LF Permanent HMAC w/Conc. Base Pavement Repair (Per fig. 2) And all necessary appurtenances and incidental work to provide a complete and serviceable project. Pursuant to the foregoing "Notice to Bidders", the undersigned Bidder, having thoroughly examined the Contract Documents, including plans, specifications, and site of the project, understanding the amount of work to be done, hereby proposes to do all the work and furnish all labor, equipment, and material necessary to fully complete the work as provided in the Plans and Specifications, and subject to the inspection of the Department of Engineering of the City of Fort Worth. Upon acceptance of this Proposal by the City Council, The bidder is bound to execute a contract and furnish Performance, Payment and Maintenance Bonds approved by the City of Fort Worth for performing and completing the said work within the time stated for the following sums to -wit: MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 11 PS -070460410280 DOE NO. 2628 (Furnish and install, including all appurtenant work, complete in place, the following items) (D -No. refers to specifically related items in the Part D Special Conditions, all Special Conditions apply:) LIITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT fl 1. 75 LF *6 -Inch PVC Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: f a r -fu Dollars and rlo Cents $ $ 3r000. vn 2. 5,146 LF *8 -Inch PVC Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: F7 Ft4- 4..v•' Dollars and no Cents $sot $ Z1 gp . 3. 18 LF *18 -Inch PVC Sanitary Sewer Pipe; 11 All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: One h_ ,dred c.' Dollars and rl o Cents $J_3. o oo $ Z, 3 4",'o a4. 2,069 LF 8 -Inch DIP Sanitary Sewer Pipe; All Trench Depths, D-49, D-56, D-71, D-21; Per Linear Foot: fl 56;LiI Dollars and rt-v Cents $ (P 0 . eo $171- I_o. OO 5. 320 LF **6 to 8 -Inch Sanitary Sewer Rehabilitation By Pipe Enlargement, D-49, D-56, D-71, DA-2;Per Linear Foot: Do E-lt .d' -a Dollars fland Cents $ 1 Po. co $ 3z,axe. so 6. 1 EA 6 to 8 -Inch Sanitary Sewer Rehabilitation By Pipe Enlargement Method into Exist Sanitary Sewer D Manhole, Special Knock -Off Enlargement Head or Other Method as Approved by the Engineer, DA-37;Per EA: 11 One, 1Gtsu.s a.'ci Dollars and r� Cents $ 1, ca'. vo $,,occ. er' a 7. 33 LF 6 to 8 -Inch Sanitary Sewer Rehabilitation Pipe Sag Elimination, D-49, D-56, D-71, D-21, DA-5;Per Linear Foot: Sc`L-h7 -fl'v.e Dollars aand rzo Cents $ SOS. ate $ .2,_i cf , o 8. 4,114 LF Trench Safety System, 11 D-51; Per Linear Foot: Q.e e= Dollars Li and rio Cents $ too $ 4//4L• ©o * and ** Contractor shall complete City approved Product and Method Forms on Page 30 PART- B PROPOSAL, UNIT 4 B-54 aMAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 LIPS -070460410280 DOE NO. 2628 ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 9. 2 EA Sanitary Sewer Manhole Non -Paved Frame Grade Adjustment and Sealing: DA -8; Per Each: li ree, h ndeM ,.�. -L4 Dollars and Cents $,o .ov $ '/oo. 00 10. 24 EA Remove Existing Sewer Manhole, D-55; Per Each: FIvt f4twidr&,! Dollars and Cents $ 500. $ i, 000. __ oo an 11. 1 EA Exploratory Excavation (D -Hole), D-79; Per Each: 0fl One. ay,5&ftcL Dollars and n,O Cents $ /,000. o- $ i,or. ao 12. 31 EA Standard 4 -Foot Diameter Manhole Q to 6 Feet Depth, Fig. 103, D-52; Per Each: 00�__ FVG h{tWid(diollars uSW& a and rt,o Cents $ 1, 5Do. $ , oo. 13. 2 EA Shallow Cone Sanitary Sewer Manhole Fig. 105, D-52; Per Each: U. Dhe Thous l:5,c, J -k w(,dbollars and r?10 Cents $ /, 600. z O $ 3, zoo. 0?' 14. 13 VF Additional Depth Over 6 -Feet For Standard 4- Foot Diameter Sanitary Sewer Manhole; fl D-52; Per Vertical Foot: One, 4k4iwfr? ( Tuley Dollars and rte Cents $ t 20.Oz $_/t 5/0O. a15. 35 EA Manhole Insert for Standard 4 -Foot Diameter Manhole, D-52; Per Each: -ffti Dollars and n.o Cents $ 50. oa $ ,,,7s'o. 00 16. 35 EA • Concrete Collar Foci . 121, D-52; Per Each: a /wa ,uu�(�eo(i.�k, Dollars and rl o Cents $ 05-0.00 $ g T57. B0 fl 17. 36 EA Vacuum Test Sanitary Sewer Manhole; D-63; Per Each: Sec "_-h1 VZ Dollars Q and _______________Cents $ 75. oo $ z,7oo.00 18. 166 EA Install 4 -Inch Sanitary Sewer Service Tap- D-53; Per Each: Iu.v-dr'e,,1 Dollars and r) -o Cents $ ao . oa $ 4, 4.00. oo PART - B PROPOSAL, UNIT 4 B-55 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 PS -070460410280 DOE NO. 2628 ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 19. 2,408 LF Install 4 -Inch Sanitary Sewer Service Line From Service Tap to ROW; D-53; Per Linear Foot: -Tl�, ft io Dollars and _ Cents $ z . Lv $ 77 o5�.Do 20. 2.4 TON Install 4 -Inch DIP Sanitary Sewer Service Tapp; D-53; Per Ton: 77 c d. Dollars Uand Cents $ 9, Oca,, $ ZI, loon. to 21. 3,053 LF Install 4 -Inch DIP Sanitary Sewer Service fl Line From Service Tap to ROW; D-53; Ii Per Linear Foot: Dollars and /2d Cents $3. oD $ l0 408.00 22. 8 EA Install 4 -Inch Sanitary Sewer Service Tap for Service Reconnection of Pipe by Pipe Enlargement Method; D-53; Per Each: ©ne. %hauza#-ioL Dollars and rio Cents $ f, Ooo . co $ 8" 00o. gn fl 23. 25 CY Flowable Fill Grout for Miscellaneous Placement as Directed by the Engineer, D-45; Per Cubic Yard Dollars and Cents $ bo. 00 $1, Soo. co 24. 25 CY Crushed Limestone for Miscellaneous fl Placement as Directed by the Engineer, Li D-45; Per Cubic Yard ,I'' ✓P� Dollars and /2o Cents $ S. ov $ / z S. 00 I.•1 25. 25 CY Ballast Stone for Miscellaneous Placement as Directed by the Engineer, Ii D-45; Per Cubic Yard i✓G Dollars and no Cents $ 5 oc) $ 1Z5. cc 26. 25 CY Class 'E' Concrete(1500#) for Miscellaneous Placement as Directed by the Engineer, D-45; Per Cubic Yard 74,-t Dollars a and YL-O Cents $ /o. oo $ zSo. 00 27. 25 CY Class 'B' Concrete(2500#) for Miscellaneous Placement as Directed by the Engineer, D-45; Per Cubic Yard %- Dollars ft and __ Cents $10-00 $ ZSo, 00 PART - B PROPOSAL, UNIT 4 B-56 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 LIPS -070460410280 DOE NO. 2628 ITEM APPROX. DESCRIPTION OF ITEMS WITH UNIT TOTAL NO. QUANTITY BID PRICES WRITTEN IN WORDS PRICE AMOUNT 28. 263 SY Concrete Sidewalk and Driveway Replacement, D-44, Per Square Yard: /i^.kc Q Dollars and Cents $_44c. as $_10, SZo, pO fl 29. 275 LF Concrete Curb and Gutter Replacement, DA -21, Per Linear Foot: W2i-/z, -i'1rn. Dollars and /2o Cents $ Z Z . ate $ ,, o5o. c 30. 5,524 LF Permanent HMAC Pavement Repair, Per TPW Fig. 4 to match existing fl construction, D-50, Per Linear Foot: �j- oxe Dollars and PLO Cents $ 4L. Ozb $ Z Zro, 4 8'4.Ofl fl31. 299 LF Permanent Concrete Pavement Repair, Per TPW Fig. I to match existing construction, D-50, Per Linear Foot: f 5c;k Dollars an�aY-�., d Il-v Cents $ 4io. ao $/3,1544 32. 4,373 LF Permanent HMAC w/ Conc Base Pavement Q Repair, Per TPW Fig. 2 to match existing construction, D-50, Per Linear Foot: Dollars fl and Cents $ c/gc. av $tj 33. 594 SY 4 -Inch Topsoil Replacement, D-73, Per Square Yard: Dollars and i2o Cents $_I. a-' $ 5g.. 60 34. 665 LF Bermuda or St. Augustine Solid Sodding, D-73; Per Linear Foot: �i-0h-L Dollars and ✓Lo Cents $ 8. -0 $ 5 3 O. 00 D35. 715 LF Hydro Mulch Seeding, D-73; Per Linear Foot: �t! o Dollars and /2o Cents $ Z.et' $ 36. 1085 LF Pre -Construction Television Inspection, of Sanitary Sewer, D-62; Per Linear Foot: fl !4l o Dollars a and/ Cents $ 2.SV $ 2,7/Z,SO 37. 8,104 LF Post Construction Television Inspection of Sanitary Sewer, D-65; Per Linear Foot: ©_ e- Dollars and ' Cents $ 1. So $ I7-, /S6. cO PART — B PROPOSAL, UNIT 4 Q B-57 I J MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 PS -070460410280 DOE NO. 2628 0 Total Amount Bid Unit 4: 0 0 0 a 0 0 0 ci 0 0 I I 0 0 PART - B PROPOSAL, UNIT 4 0 B-58 $/ 28! 4z9 Sa Total Amount Bid Unit 4• in Writing $ Df7 e /Vlc I hl a0 IWO Fr- !4widfr&( TWcrr1'� ►�'t2� {l�s a. ( ��y Cen�S, Note: A BID MAY BE SUBMITTED ON UNIT 1, UNIT 2, UNIT 3, UNIT4, OR ANY COMBINATION OF THE FOUR UNITS, AT THE CONTRACTOR'S OPTION BIDDER OF UNIT 4 MUST COMPLETE sit 5u lAIv A2 DOCUMENTATION ON PAGES pkac- t3-tol 29 B-30, B -31, B-32 I 0 0 I 0 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 PS -070460410280 DOE NO. 2628 CITY APPROVED METHOD AND APPROVED PRODUCTS FOR * AND ** * CONTRACTOR SHALL SELECT TYPE OF PIPE TO BE USED: Standard Spec. No. E1-31 E1-25 E1-27 ___________EI-28 E 100-2 Size 4" THRU 30" 4" THRU 15" 4" THRU 15" 18" THRU 27" 18" THRU 48" Consult the "City of Fort Worth, Texas Standard Product List" to obtain the Generic/Trade Name and the Manufacturer for the pipes listed above. QCITY APPROVED METHOD FOR ** 0 0 0 0 I 0 a 0 I PART — B PROPOSAL a B-59 ** CONTRACTOR SHALL SELECT PIPE ENLARGEMENT METHOD TO BE USED AND PROVIDE NAME OF CONTRACTOR FOR INSTALLATION: PIM METHOD R_ Name of Subcontractor if Applicable T.R.S. SYSTEM McCONNELL METHOD EXPANDED SYSTEM Name of Subcontractor if Applicable Name of Subcontractor If Applicable Name of Subcontractor If Applicable Failure to provided the information required above may result in rejection of bid as non -responsive. Only products or methods listed above will be allowed for use in this project. Any substitution shall result in the rejection of bid as non -responsive. Li I' I I it I I I I I 0 I I I I LI I PART — B PROPOSAL 0 B-60 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNIT 4 PS -070460410280 DOE NO. 2628 Within ten (10) days after notification by the City, the undersigned will execute the formal contract and will deliver an approved Surety Bond and such other bonds as required by the Contract Documents, for the faithful performance of this contract. The attached bid security in the amount of 5% is to become the property of the City of Fort Worth, Texas, in the event the contract and bond or bonds are not executed and delivered within the time above set forth, as liquidated damages for the delay and additional work caused thereby. The undersigned bidder certified that he has been furnished at least one set of the General Contract Documents and General Specifications for Water Department Projects dated January 1, 1978, and that he has read and thoroughly understands all the requirements and conditions of those General Documents and the specific Contract Documents and appurtenant plans. The undersigned assures that its employees and applicants for employment and those of any labor organization, subcontractors, or employment agency in either furnishing or referring employee applicants to the undersigned are not discriminated against as prohibited by the terms of City Ordinance No. 7278 as amended by City Ordinance No. 7400. (Complete A or B below, as applicable:) A. The principal place of business of our company is in the State of Nonresident bidders in the State of , our principal place of business, are required to be percent lower than resident bidders by state law. A copy of the statue is attached. Nonresident bidders in the State of , our principal place of business, are not required to underbid resident bidders. V B. The principal place of business of our company or our parent company or majority owner is in the State of Texas. This contract is issued by an organization which qualifies for exemption pursuant to the provisions of Article 20.04 (F) of the Texas Limited Sales, Excise and Use Tax Apt. Al! Equipment and materials not consumed by or incorporated into the project. construction, are subject to State sales taxes under house Bill 11, enacted August 15, 1992. The successful Bidder shall be required to complete the attached Statement of Materials and Other Charges contractor at the time of executing the contract. The Bidder agrees to begin construction within ten (10) working days after issue of the work order, and to complete the contract within: Unit 1 — ninety (90) calendar days Unit 2 — one hundred twenty (120) calendar days Unit 3 — ninety (90) calendar days Unit 4 —one hundred twenty (120) calendar days after beginning construction as set forth in the written work order to be furnished by the Owner. This document is designed as four (4) separate contract documents and proposals shall not be construed as being a package. The proposal Sections are designed as four (4) separate proposals and are arranged in Units to allow the Contractor to submit a bid on one, two, three or all four units. Contracts will be awarded to the responsible, responsive low bidder for each of the four Units. If the Contractor only submits a bid on one proposal and is the lowest proposed price total, the Contractor will be the apparent successful bidder for the individual proposal Unit. Contractors may bid on any or all of the four Units. Time on all units awarded will run concurrently. If the Contractor is low bidder on more than one unit, the Contractor's time for all units awarded to him will be the longest time allowed for any single unit awarded to the Contractor. I (we), acknowledged receipt of the following addenda to the plans and specifications, all of the provisions and requirements of which have b en taken into consideration in preparation of the foregoing bid: Addendum No. 1 (Initials) /__� Respectively submitted, Addendum No. 2 (Initials)It Addendum No. 3 (Initials) C T Addendum No. 4 (Initials) y!=�— _ /I/ �� (SEAL) Date: '7 y i eiepnone: ≥o - 53g-i'j,3 n BID SUMMARY MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 SEWER PROJECT NO. PS -070460410280 UNIT 1, DOE NO. 1828 $ 8(7, 53 S. 60 UNIT 2, DOE NO. 2526 c2 �7L9 $ 0 UNIT 3, DOE NO. 2527 $ 5ggf 45-0. SD aUNIT 4, DOE NO. 2528 $_1, z W1 I Z9. 5O TOTAL BID $ a U U U U a B- SUMMARY PART - B PROPOSAL B-61 I I I III I I I L I I PART C - GENERAL CONDITIONS El PART C - GENERAL CONDITIONS TABLE OF CONTENTS NOVEMBER, 1, 1987 TABLE OF CONTENTS I I I I I 7 I LI I C1-1 DEFINITIONS Cl-1.1 Definition of Terms C1-1 (1) Cl-1.2 Contract Documents C1-1 (1) C1-1.3 Notice to Bidders C1-i (2) Cl-1.4 Proposal Cl-i (2) Cl-1.5 Bidder Cl-1 (2) C1-1.6 General Conditions Cl-1 (2) Cl-1.7 Special Conditions Cl-1 (2) Cl-1.8 Specifications Cl-i (2) Cl-1.9 Bond Cl-1 (2) Cl-1.10 Contract Cl-1 (3) C1-1.11 Plans Cl-1 (3) C1-1.12 City Cl-i (3) Cl-1.13 City Council Cl-i (3) Cl-1.14 Mayor Cl-1 (3) Cl-1.15 City Manager Cl-1 (3) Cl-1.16 City Attorney Cl-1 (3) C1-1.17 Director of Public Works Cl-1 (4) C1-1.18 Director, City Water Department Cl-1 (4) C1-1.19 Engineer Cl-]. (4) Cl-1.20 Contractor Cl-1 (4) Cl-1.21 Sureties Cl-1 (4) Cl-1.22 The Work or Project Cl-1 (4) Cl-1.23 Working Day Cl-1 (4) C1-1.24 Calendar Day Cl-1 (4) C1-1.25 Legal Holiday Cl-i (4) Cl-1.26 Abbreviations Cl-1 (5) Cl-1.27 Change Order Cl-i (6) Cl-1.28 Paved Streets and Alleys Cl-1 (6) Cl-1.29 Unpaved Streets and Alleys Cl-1 (6) Cl-1.30 City Streets C1-1 (6) C1-1.31 Roadway Cl-1 (6) C1-1.32 Gravel Street Cl-1 (6) C2-2 C2-2.1 C2-2.2 C2-2.3 C2-2.4 C2-2.5 C2-2.6 INTERPRETATION OF PROPOSAL Proposal Form Interpretation Examination of and Site Submitting of Proposal Rejection of Proposals Bid Security AND PREPARATION of Quantities Contract Documents (1) C2-2 (1) C2-2 (1) C2-2 (2) C2-2 (3) C2-2 (3) C2-2 (3) LI r C2-2.7 Delivery of Proposal 1 O2-2.8 Withdrawing Proposals C2-2 (4) C2-2.9 C2-2.10 Telegraphic Modification of Proposals Public Opening of Proposal C2-2 (4) C2-2 (4) C2-2.11 Irregular Proposals C2-2 (4) C2-2.12 Disqualification of Bidders C2-2 (4) C2-2 (5) C3-3 C3-3.1 AWARD AND EXECUTION OF DOCUMENTS Consideration C3-3.2 of Proposals Minority Business Enterpise C3-3 (1) Women -Owned Business Enterprise compliance C3-3.3 C3-3.4 Equal Employment Provisions C3-3 (1) Withdrawal of Proposals C3-3 (1) C3-3.5 Award of Contract C3-3 (2) C3-3.6 C3-3.7 Return of Proposal Securities C3-3 (2) Bonds C3-3 (2) C3-3.8 Execution of Contract C3-3 (2) C3-3.9 C3-3.10 Failure to Execute Contract Beginning Work C3-3 (4) C3-3 (4) C3-3.11 Insurance C3-3 (4) C3-3.12 Contractor's Obligations C3-3 (4) C3-3.13 Weekly Payroll C3-3 (7) C3-3.14 C3-3.15 Contractor's Contract Administration C3-3 (7) Venue C3-3 (7) C3-3 (8) C4-4 C4-4.1 SCOPE OF WORK <' ' C4-4.2 Intent of Contract Documents Special Provisions C4-4 (1) C4-4.3 C4-4.4 Increased or Decreased Quantitie Alteration C4-4 (1) C4-4 (1) C4-4.5 of Contract Documentss Extra Work C4-4 (2) C4-4.6 C4-4.7 Schedule of Operations C4-4 (2) Progress Schedules for Water and C4-4 (3) Sewer Plant Facilities C5-5 C5-5.1 CONTROL OF WORK AND MATERIALS C4-4 (4) C5-5.2 Authority of Engineer C5-5.3 Conformity with Plans C5-5 (1) C5-5.4 Coordination of Contract Documents Cooperation C5-5 (2) C5-5 (2) C5-5.5 C5-5.6 of Contractor Emergency and/or Rectification Work C5-5 (2) Field Office C5-5 (3) C5-5.7 Construction Stakes C5-5 (3) C5-5.8 C5-5.9 Authority and Duties of Inspectors Inspection C5-5 (3) C5-5 (4) C5-5.10 C5-5.11 Removal of Defective and Unauthorized Work Substitute Materials C5-5 (5) C5-5 (5) C5-5.12 or Equipment Samples and Tests of Materials C5-5 (5) C5-5.13 Storage of Materials C5-5 (6) C5-5.14 C5-5.15 Existing Structures and Utilities C5-5 (6) C5-5.16 Interruption of Service Mutual Responsibility of C5-5 (7) C5-5 (7) C5-5.17 Contractors Cleanup C5-5 (8) C5-5.18 Final Inspection C5-5 (8) C5-5 (9) 1 (2) C C6-6 LEGAL RELATIONS AND PUBLIC RESPONSIBILITY C6-6.1 Laws to be Observed C6-6 C6-6 (1) (1) C6-6.2 C6-6.3 Permits and -Licenses Patented Devices, Materials and Processes C6-6 C6-6 (1) (2) C6-6.4 Sanitary Provisions C6-6.5 Public Safety and Convenience C6-6 (2) C6-6.6 Privileges of Contractor in Streets, I Alleys, and Right -of -Way C6-6 (3) C6-6.7 C6-6.8 Railway Crossings Barricades, Warnings and Watchmen C6-6 C6-6 (4) (4) eC6-6.9 Use of Explosives, Drop Weight, etc. C6-6 (5) C6-6.10 Work Within Easements C6-6 C6-6 (6) (8) C6-6.11 C6-6.12 Independent Contractor Contractor's Responsibility for C6-6 (8) C6-6.13 Damage Claims Contractor's Claim for Damages C6-6 (10) (� C6-6.14 Adjustment of Relocation of Public C6-6 (10) L.. C6-6.15 Utilities, etc. Temporary Sewer Drain Connections C6-6 (10) C6-6.16 Arrangement and Charges of Water C6-6 (11) C6-6.17 Furnished by City Use of a Section of Portion of the Work C6-6 (11) C6-6.18 Contractor's Responsibility for Work C6-6 (11) I C6-6.19 No Waiver of Legal Rights C6-6 6-6 (12) (12) C6-6.20 Personal Liability of Public Officials C6-6.21 State Sales Tax C6-6 (12) '- C7-7 PROSECUTION AND PROGRESS C7-7 (1) C7-7.1 C7-7.2 Subletting Assignment of Contract C7-7 (1) C7-7.3 Prosecution of the Work C7-7 C7-7 (1) (2) C7-7.4 C7-7.5 Limitations of Operations Character of Workman and Equipment C7-7 I C7-7.6 C7-7.7 Work Schedule Time of Commencement and Completion C7-7 (3) (4) C7-7.8 Extension of time of Completion C7-7 (4) e C7-7.9 C7-7.10 Delays Time of Completion C7-7 (5) C7-7.11 Suspension by Court Order C7-7 - 7C7-7.13 (6) C7-7.12 Temporary Suspension Termination of Contract due to C7-7 (7) National Emergency C7-7.14 Suspension of Abandonment of the C7-7 (7) Work and Annulment of Contract C7-7.15 C7-7.16 Fulfillment of Contract Termination for Convenience of the Onwer C7-7 C7-7 (9) (10) rC7-7.17 Safety Methods and Practices C7-7 (13) C8-8 C8-8.1 MEASUREMENT AND PAYMENT Measurement of Quantities C8-8 (1) tC8-8.2 Unit Prices C8-8 (1) I 1 (3) 1 C8-8.3 Lump Sum I C8-8.4 C8-8.5 Scope of Payment C8-8 (1) C8-8.6 Partial Estimates and Retainage Withholding Payment C8-8 C8-8 (1) C8-8.7 Final Acceptance C8-8 (2) (3) C8-8.8 C8-8.9 Final Payment C8-8 (3) C8-8.10 Adquacy of Design General C8-8 (3) C8-8.11 Guaranty Subsidiary Work C8-8 C8-8 (4) (4) C8-8.12 C8-8.13 Miscellaneous Placement of Material Record C8-8 (5) Documents C8-8 (5) C8-8 (5) (4) PART C - GENERAL CONDITIONS Cl-1 DEFINITIONS SECTION Cl-1 DEFINITIONS C1-1.1 DEFINITIONS OF TERMS: Whenever in these Contract Documents the following terms or pronouns in place of them are be understood and used, the intent and meaning shall interpreted as follows: Cl-1.2 CONTRACT DOCUMENTS: The Contract Documents are all of the written and drawn documents, such as specifications, bonds, addenda, plans, etc., which govern the terms and performance of the contract. These are contained in the General Contract Documents and the Special Contract Documents. a. GENERAL CONTRACT DOCUMENTS: The General Contract Documents govern all Water Department Projects and include the following items: PART A - NOTICE TO BIDDERS (Sample) White PART B - PROPOSAL (Sample) White PART C - GENERAL CONDITIONS (CITY) Canary Yellow (Developer) Brown PART D - SPECIAL CONDITIONS Green PART E - SPECIFICATIONS El -White El-Whien Rod E2A-White PERMITS/EASEMENTS Blue PART F - BONDS (Sample) White PART G - CONTRACT (Sample) White b. SPECIAL CONTRACT DOCUMENTS: The Special Contract Documents are prepared for each specific project as a supplement to the General Contract Documents and include the following items: PART A - NOTICE TO BIDDERS (Advertisement) Same as above PART B - PROPOSAL (Bid) I PART C - GENERAL CONDITIONS PART D - SPECIAL CONDITIONS PART E - SPECIFICATIONS I PERMITS/EASEMENTS PART F - BONDS PART G - CONTRACT I PART H - PLANS (Usually bound separately) I 0 I 1 C1-1.3 NOTICE TO BIDDERS: I either NOTICE All of the furnished direct to in public legal Publications contemplated under interested advertising mediums or notice to the Contract Documees nts to the work bidders, constitutes the -C1-1.4 PROPOSAL; tender of a bidder to Completed written I to have done perform the work and signed offer or Proposal, , together with the bid which the Owner Which becomes binding security, desires officially received by upon the Bidder the read and not rejected the Owner, has been Bidder when it by thePublicl is Owner. Y opened and C1-1.5 BIDDER: company, associationnY person, persons, I a duly authorized corporation firm, Partnership, Performing rePresentativeactin9 directly or through constitutsthe work contemplated Under Submitting a a bidder. Contract Documents, for Documents, Cl-1.6 GENERAL usual 6 GENERAL CONDITIONS: The General Performance and contract requirements°nditions accordance e of the work so that which are the and r Customary It will be carriedgovern the equirements of the Y procedure, the local °n in promulgated ordinances, City of Fort statutes, an, Worth's charter and wherever there Conditions and Special be a conflict � precedence and shale ial Conditions between the General govern. - ' the latter shall take C1-1.7 SPECIAL CONDITIONS; requirements Special conditions specific twhich are necessary are the covered icovered by the Contract Documentfor the particular General oGeneral Conditions, and not s Conditions and When considered Documents they provide other with the and Owner the information ets of the should have in order to which the Contractor the project, gain a thorough knowledge of C1-1,g SPECIFICATIONS: part of the Contract D The Specifications is requirements w Documents which sets that section or workmanship equip must be met by forth in detail the q pment all materials, construction, completed and useful and services in order standard spand Useful Whenever reference drender etc. , regulationsa such referred to ► requirements is made to Contract Documents documents shall become ' statutes, just as though they were embodied i the C1-1.9 BOND: therein. e b bond or bonds are the written by the Contractor for the por security furnishedPromptand C1-1 (2) faithful performance of the contract and include the following:. a. Performance Bond (see paragraph C3-3.7) b. Payment Bond (see paragraph C3-3.7) c. d. Maintenance Proposal or Bond Bid (see paragraph C3-3.7) Security (see Special Instructions to Bidders, Part A and C2-2.6) Cl-1.10 CONTRACT: The Contract is the formal signed agreement between the Owner and the Contractor covering the mutual understanding of the two contracting parties about the project to be completed under the Contract Documents. C1-1.11 PLANS: The plans are the drawings or reproductions therefrom made by the Owner's representative showing in detail the location, dimension and position of the various elements of the project, including such profiles, typical cross -sections, layout diagrams, working drawings, preliminary drawings and such supplemental drawings as the Owner may issue to clarify other drawings or for the purpose of showing changes in the work hereinafter authorized by the Owner. The plans are usually bound separately from other parts of the Contract Documents, but they are a part of the Contract Documents just as though they were bound therein. C1-1.12 CITY: The City of Fort Worth, Texas, a municipal corporation, authorized and chartered under the Texas State Statutes, acting by and through its governing body or its City Manger, each of which is required by charter to perform specific duties. Responsibility for final enforcement of Contracts involving the City of Fort Worth is by Charter vested in the City Manager. The terms City and Owner are synonymous. Cl-1.13 CITY COUNCIL: The duly elected and qualified governing body of the City of Fort Worth, Texas. Cl-1.14 MAYOR: The officially elected Mayor, or in his absence, the Mayor Pro tern of the City of Fort Worth, Texas. Cl-1.15 CITY MANAGER: The officially appointed and authorized City Manager of the City of Fort Worth, Texas, or his duly authorized representative. Cl-1.16 CITY ATTORNEY: The officially appointed City Attorney of the City of Fort Worth, Texas, or his duly authorized representative. C1-1 (3) I I CZ -1.17 DIRECTOR OF I of the City of Fort Worth, PUBLIC WORKS: The duly referred City Engineer, or his duly to in thep°lnted official authorized representativeter as the C1-1.18 DIRECTOR Director of the City WATER DEPARTMENT: Worth, Texas, or y Water Department The duly assistant his of appointed , or agents. duly authorizedtrepe resentf Fort Cl 1.19 ENGINEER: ive, of the Fort The Director of i authorized W°rth City Water Public Works superintendeassistants Department the Director agents, engineers' or their duly duties entrusted acting within the ins to them. scope of inspectors or C1-1.20 CONTRACTOR: the Particular company firm The Person contract association, or corporationns' Partnership, directly with the Owner for the or throe execution of entering into a sub -contractor through a duly authorized the work contract is a person, represent work, acting with the ' firm, corporationatiVe. A materials or only Principal contractor or Others labor, for work s uPP f the under C1-1, at the site of labor and 21 SURETIES: The Project. such bonds Corporate bodies i sureties are required with which and satisfactory are to be and for the Contractor. bound by atisfactory fulfillment fully res actor. The all re Ponact and for requirements as set forth the Contractfor he entire approved changes therein. the Contract any and Documents and C1-1.22 THE WORK in and covered OR PROJECT: The completed limited by the Contract Documents, work contem equipment to the furnishing of alllabor,' including plated and incidentals but not 1 and serviceable necessary t° materials project produce tools, C1-1, a completed 23 WORKING DAY: day, not includin A working day is the Contractor weather or Saturdays Sundays, and legal defined as a calendar I work actor permit the conditions not under the control holidays , in Whic7:00 for a period of net Performance of the control of a•m• and 6:00 less than seven principal unit of en Paragraph C7-7.6. p.m., with exceptions (as Permit7) hours ted between C1-1.24 CALENDAR DAYS in or month, no days beinS: A calendar day is 9' excepted, any day of the week C1-1.25 LEGAL HOLIDAYS - Prescribed by Legal holidays observance bthe City Council shall be observed by City employees Of the City Worth for as follows: y of Fort Cl-I (4) 1 I I I I I I I 1. New Year's Day January 1 2. M. L. King, Jr. Birthday Third Monday in January 3. Memorial Day Last Monday in May 4. Independence Day July 4 5. Labor Day First Monday in September 6. Thanksgiving Day Fourth Thursday in November 7. Thanksgiving Friday Fourth Friday in November 8. Christmas Day December 25 9. Such other days in lieu of holidays as the City Council may determine When one of the above named holidays or a special holiday is declared by the City Council, falls on Saturday, the holiday shall be observed on the preceding Friday or if it falls on Sunday, it shall be observed on the following Monday, by those employees working on working day operations. Employees working calendar day operations will consider the calendar holiday as the holiday. Cl-1.26 ABBREVIATIONS: Wherever the abbreviations defined herein appear in Contract Documents, the intent and meaning shall be as follows: I' AASHTO - I ASCE - LAW - ASTM - AWWA - ASA HI Asph. Ave. Blvd. - CI CL GI - Lin. lb. MH - Max. - I American Association of MGD State Highway Transportation Officials American Society of Civil Engineers In Accordance With American Society of Testing Materials American Water Works Association American Standards Association Hydraulic Institute Asphalt Avenue Boulevard Cast Iron Center Line Galvanized Iron Linear or Lineal Pound Manhole Maximum Cl-1 (5) - Million Gallons Per Day CPS - Cubic Foot per Second Min. - Minimum Mono.- Monolithic % - Percentum R - Radius I.D. - Inside Diameter O.D. - Outside Diameter Elev.- Elevation F - Fahrenheit C - Centigrade In. - Inch Ft. - Foot St. - Street CY - Cubic Yard Yd. - Yard SY - Square Yard L.F. - Linear Foot D.I. - Ductile Iron CI -1.27 CHANGE supplementalORDER: A "Change supplemental agree ment between the Order" is a covering some added or deducted Owner and t written found necessary meand which was item or feature Contractor e of the ro not s eature which may be scope n unit P ject on which bids wereesublly included quantities stated in the submitted, in the matter of a Change Order Unless proposal Increase more than 2a$ the the are not the subject the original amount of the increase or decrease is Proposal. Particular item or items All in "Change Orders" information asrd necessary shall be prepared furnished by the by the City from C1-1.28 PAVED STREETS AND Contractor. shall be defined ALLEYS; following types as a street or A Paved street or alley unimproved sce f wearing alley having one of surfaces applied over the natural 1. Any type of as separate base material. concrete with 2•or without incl type iof asphalt surface treatment, not separate base material surface e, with 3. Brick, with or without o r 4. Concrete Separate base 4 Any combinationor ofwtheout se material. separate base material. C1-129 UNPAVED STREETS OR � above. roadway or other ALLEYS: An above for surface is any area "Paved Streets and Alleys,n -1-1.30 CITY STREETS: between the right-of-way CI -1.31 ROADWAY; The parallel lines two (21) (4') feet back of the exists• 1 unpaved street, alley, except those defined A city street is defined lines as the street is as that area dedicatP� Lvaaway is defined as the area feet back of the average edge curb lines 9 of pavement whero C1-1.32 GRAVEL to which STREET: A gravel street s' has been added is lmllar material one or more applicatio suofaved street both any than the natural gravel or street surface y improvement material found on the was made. between or four no curb C1-i (6) Li I I I •1 I I I �1 Li r I I I a 1 I I I I SECTION C - GENERAL CONDITIONS C2-2 INTERPRETATION AND PREPARATION OF PROPOSAL SECTION C2-2 INTERPRETATION AND PREPARATION OF PROPOSAL, C2--2.1 PROPOSAL FORM: The Owner will furnish bidders with proposal.form, which will contain an itemized list of the items of work to be done or materials to be furnished and upon which bid prices are requested. The Proposal form will state the Bidder's general understanding of the project to be completed, provide a space for furnishing the amount of bid security, and state the basis for entering into a formal contract. The Owner will furnish forms for the Bidder's "Experience Record," "Equipment Schedule," and "Financial Statement," all of which must be properly executed and filed with the Director of the City Water Department one week prior to the hour for opening of bids. The financial statement required shall have been prepared by anindependentcertified public accountant or an independent public accountant holding a valid permit issued by an appropriate state licensing agency, and shall have been so prepared as to reflect the current financial status. This statement must be current and not more than one (1) year old. In the case that a bidding date falls within the time a new statement is being prepared, the previous statement shall be updated by proper verification. Liquid assets in the amount of ten (10%) percent of the estimated project cost will be required. For an experience record to be considered to be acceptable for a given project, it must reflect the experience of the firm seeking qualification in work of both the same nature and magnitude as that of the project for which bids are to be received, and such experience must have been on projects completed not more than five (5) years prior to the date on which are to be received. The Director of the Water department shall be sole judge as to the acceptability of experience for qualification to bid on any Fort Worth Water Department project. The prospective bidder shall schedule the equipment he has available for the project and state that he will rent such additional equipment as may be required to complete the project on which he submits a bid. C2-2.2 INTERPRETATION OF QUANTITIES: The quantities of work and materials to be furnished as may be Listed in the proposal C2-2(1) Li 1 forms or other parts of the Contract Documents considered as approximate only Well be and will be purpose of comparing bids on a uniform basis. used for the made to the Contractor for only the actual Payment will be performed or materials furnished in f work -Documents Contract strict accordance w and Plans, with the performed and sbefincr materials to be furnished may increased be decreased as hereinafter d or. provided, without in - invalidating the unit prices bid or any w the any Contract Documents. other requirements of of C2-2.3 EXAMINATION OF CONTRACT DOCUMENTS Bidders are advised that the PROJECT: I ContractDocumentsTonOfile the Owner shall constitute all•of the information Owner will furnish. which the All additional information and data which the owner will supply after promulgation of the formal contract documents shall be issued in the addenda form of written and shall become part of the as though such addenda were Contract Documents. actually writtenrintoDthem o iginal Bidders are requiredal , prior to the filing of pro os and become familiar with P to I , read the Contract Documents, to visit the site of the project and examine carefully conditions, all local to inform themselves by their own research and investigations, independent tests boring, means as may be necessary ' and by to such other complete conditions which will be encountered of the project. They mustor tion uring thelco construction difficulties of the themselves the work and aldgatt attending affecting the cost of doing the work g circumstances its or the time required for completion, and obtain all information intelligent required proposal to make an given any representative of the lOwner a by the Owner other than ttjo or hat the Contract Documents and officially romu contained in thereto, s shall be binding upon the Owner. Bidders exclusively and solely u se shall relyy their hei r investigation, research, tests, n estimates, which explorations,n are necessary for full and complete inford other data which the proposal is oration upon to be based. It is mutuall the submission of a proposal is _fY agreed that bidder has made the investiga tions,examinations eand atests herein required. Claims for additional compensation due to variations between conditions actually encountered in construction and as indicated in the Contract Documents not be allowed. will The logs of Soil Borings, if any, showing on the general information only and plans are for may not be correct. Neither the -I C2-2(2) I Owner nor the Engineer guarantee that the data shown is representative of conditions which actually exist. C2-2.4 SUBMITTING OF PROPOSAL: The Bidder shall submit his I Proposal on the form furnished by the Owner. All blank spaces applicable to the project contained in the form shall be correctly filled in and the Bidder shall state the prices, written in ink in both words and numerals, for which he e proposes 'to do the work contemplated or furnishe the materials required. All such prices shall be written legibly. In case of discrepancy between the price written in words and the 1 price written in numerals, the price most advantageous to the City shall govern. If a proposal is submitted by an individual, his or her name must be signed by him (her) or his (her) duly authorized agent. If a proposal is submitted by a firm, association, or partnership, the name and address of each member must be given, and the proposal must be signed by a member of the firm, association, or partnership, or by a person duly authorized. If a proposal is submitted by a company or corporation, the company or corporate name and business address must be given, and the proposal signed by an official or duly authorized agent. The corporate seal must be affixed. ,Power of Attorney authorizing agents or others to sign � proposal must be properly certified and must be in writing and submitted with the proposal. C2-2.5 REJECTION OF PROPOSALS: Proposals may be rejected if they show any alteration of words or figures, additions not called for, conditional or uncalled for alternate bids, incomplete bids, erasures, or irregularities of any kind, or contain unbalance value of any items. Proposal tendered or delivered after the official time designated for receipt of proposal shall be returned to the Bidder unopened. I I I C2-2.6 BID. SECURITY: No proposal will be considered unless it is accompanied by a "Proposal Security" of the character and in the amount indicated in the "Notice to Bidders" and the "Proposal." The Bid Security is required by the Owner as evidence of good faith on the part of the Bidder, and by way of a guaranty that if awarded the contract, the Bidder will within the required time execute a formal contract and furnish the required performance and other bonds. The bid security of the three lowest bidders will be retained until the contract is awarded or other disposition is made thereof. The bid security of all other bidders may be returned promptly after the canvass of bids. C2-2(3) I � 1 02-2.7 DELIVERY OF PROPOSAL: unless it is delivered No Proposal will be I Security, to the City ' accompanied by i is considered official Mana er Proper Bid Bidders It of business as or representative in the .It is the Bidder's sole set fresp nsibiorth in he "Notice the proposal at the proper time to the proper 1 to fact that a p ro er y to deliver pro osal was dispatched Place. The mere ,The Bidder must have the will not be proposal. shall be in a sealed envelope osal actually .considered. word delivered. Each PROPOSAL," and the name or descri pion my marked with the designated in the " P of the addressed to he City "Notice to Bidders. " The enveloe project as e City Hall, Fort Worth, Texas be C2 -2.g WITHDRAWING PROPOSALS: the City Manager cannot be withdrawn Prior actuall opening proposals . prior to the timer set with proposal must A request for non -consideration ofoa Manager, be made in writing, addressed to the 9 , and filed with him prior to the time set forthe opening of proposals. non -consideration arefoeenedr landopubi not reues the proposals for which non- onsiderati onl re y read aloud, for Properly filed ma quests the unopened. --Y, at the option of the have been Owner, be returned 02-2.9 TELEGRAPHIC MODIFICATION OF PROppS modify his proposal b S� Any bidder may I prior to the time settforgrenic communication at any y telegraphic communication is received proposals time f prior to the saidprovided such that the proposal opening time by the City Manager authenticated Manager is satisfied thataadwrittend further, jon over the signatureconflofathenbidderf ch was co and duly proposal o mailed �nunto the within fortp_ening time. If such confirmation is not rre received no further Consideration) hwill bers ter ivene proposal opening time, C2-2.lo PUBLIC OPENING OF PROPOSg to the proposal. properly filed and for which no A"NonProns deration " has been received will be oposals Which have been the City Manager or his authorized Publicly opened and re Requesb and place indicated in the Noticerto B dderst�ve ad aloud by which have been opened and read will remain on file at the time Owner until the contract has been awarded. All proposals authorized representatives are invited to be with the Bidders for their opening of bids. present the C2-2.11 IRREGULAR PROPOSALS: Proposals shall be considered as being "Irregular" if the form, additions y show any omissions, alterations of , or conditions not called for, unauthorized alternate btds or irregularities of any kind. However, the C2-2(4) I ri Owner reserves the right to waive any and all irregularities and to make the award of the contract to the best interest of the City. Tendering a proposal after the closing hour is an irregularity which cannot be waived. IC2-2.12 DISQUALIFICATION OF BIDDERS: Bidders may be disqualified and their proposals not considered for any of, I but not limited to, the following reason: a. Reasons for believing that collusion exists among bidders. b. Reasonable grounds for believing that any bidder is interested in more than one proposal for work contemplated. The bidder being interested in any litigation IC. against the Owner or where the Owner may have a claim against or be engaged in litigation against the bidder. d. The bidder being in arrears on any existing contract or having defaulted on a previous contract. e. The bidder having performed a prior contract in an unsatisfactory manner. f. Lack of competency as revealed by the financial statement, experience record, equipment schedule, and such inquiries as the Owner may see fit to make. g. Uncompleted work which, in the judgment of the Owner, will prevent or hinder the prompt completion of additional work if awarded. h. The bidder not filing with the Owner, one week in advance of the hour of the opening of proposals the following: 1. Financial Statement showing the financial condition of the bidder as specified in Part "A" - Special Instructions. 2. A current experience record showing especially the projects of a nature similar to the one under consideration, which have been successfully completed by the Bidder. 3. An equipment schedule showing the equipment the bidder has available for use on the I project. The Bid Proposal of a bidder who, in the judgment of the Engineer, is disqualified under the requirements stated herein, shall be set aside and not opened. 1 C2-2(5) 1 k PART C - GENERAL CONDITIONS C3-3 AWARD AND EXECUTION OF DOCUMENTS ISECTION C3-3 AWARD AND EXECUTION OF DOCUMENTS: C3-3.1 CONSIDERATION OF PROPOSALS: After proposals have been be tabulated on the opened and read aloud, the proposals will basis of the quoted prices, the quantities shown in the proposal, and the application of such formulas or other methods of bringing items to a common basis as may be established in the Contract Documents. The total obtained by taking the sum of the products of unit prices quoted and the estimated quantities plus any lump sum items and such other quoted amounts as may enter into the cost of the completed project will be considered as the amount of the bid. Until the award of the contract is made by the Owner, the right will be reserved to reject any or all proposals and waive technicalities, to re -advertise for new proposals, or to proceed with the work in any manner as maybe considered for Ithe best interest of the Owner. C3-3.2 MINORITY BUSINESS E-NTERPRISE/WOMEN-OWNED BUSINESS ENTERPRISE COMPLIANCE: Contractor agrees to provide to Owner, upon request, complete and accurate information regarding actual work performed by a Minority Business Enterprise (MBE) and or a a Woman -owned Business Enterprise (WBE) on the contract and the payment therefor. Contractor further agrees, upon request by Owner, to allow and audit and/or an examination of any books, records, or files in the possession of Contractor that will substantiate the actual work performed by the MBE or WBE. Any material misrepresentation of any nature will be grounds for termination of the contract and for initiating any action under appropriate federal, state or I local laws and ordinances relating to false statements; further, any such misrepresentation may be grounds for disqualification of Contractor at Owner's discretion for Ibidding on future Contracts with the Owner for a period of time of not less than six (6) months. I C3-3.3 EQUAL EMPLOYMENT PROVISIONS: The Contractor shall comply with Current City Ordinance prohibiting discrimination in employment practices. I- C3-3 (1) HI I The Contractor shall post the required notice to that effect on the project site, and, at his request, will be assistance by the City of Fort Worth's provided Officer Employment who will refer any qualified applicant file in his office nt he may have on to the Contractor. Appropriate be acquired from the Equal Employment notices may Officerpriate C3-3.4 WITHDRAWAL OF PROPOSALS: read by the Owner it cannot proposal has been be w�.thdrawnrbya the forty-five (45) days after the date within on which theder were opened. proposals ' C3-3.5 AWARD OF CONTRACT: reserves withholdfinal action on the right to proposals not to exceed forty-five (45) days s reasonable time, e of openin proposals, and in no event will anaward be madedatuntil investigations have been after proposed awardee. made as to the responsibility of the The award of the contract, if an award is made, will be to t lowest and best responsible bidder. he The award of the contract shall ecome effective Owner has notified the Contractorinwriting the ofsuch awar d. . C3-3.6 RETURN OF PROPOSAL SECURITIES. As price totals have been determined Owner may,proposed for comparisonnofsbids, the which 1prop ein the accpanied the proposal security salsa which, its ' not be considered for judgment, would the award, A].1 other proposal securities, usually those of the three lowest bidders, retained by the will be Owner until the required contract executed and bond furnished has been or the Owner has otherwise disposed of the bids, after which they will be City Secretary, returned by the C3-3.7 B ONDS: With the execution and delivery of the Contract Documents, the Contractor shall furnish to, Owner in the amounts herein required, the following the lbo winds: a. PERFORMANCE BOND: performance bond in an amofltfloeu1t percent of the amount of the contract, by the I as evidenced proposal tabulation or guaranteeing, the full and faithful execution of the work and performance of the contract, and for the protection of the Owner and all °ther persons against damage by reason of ne llgence of�the gContractor, or improper execution the of work or use of inferior materials. This performance performance _ C3-3 (2) I 1 bond shall guarantee the payment for all labor, materials, equipment, supplies, and services used in the construction of the work, and shall remain in full force and effect until provisions as above I stipulated are accomplished and final payment is made on the project by the City. b. MAINTENANCE BOND: A -good and sufficient I maintenance bond, in the amount of not less than 100 percent of the amount of the contract, as evidenced by the proposal tabulation or otherwise, I guaranteeing the prompt, full and faithful performance of the general guaranty which is set forth in paragraph C8-8.10. Ic. PAYMENT BOND: A good and sufficient payment bond, in an amount not less than 100 percent of the amount of the contract, as evidenced by the proposal tabulation or otherwise, guaranteeing. the prompt, full and faithful payment of all claimants as defined in Article 5160, Revised Civil Statutes I. of Texas, 1925, as amended by House Bill 344 Acts 56th Legislature, Regular Session, 1959, effective April 27, 1959, and/or the latest version thereof, supplying labor and materials in the prosecution of the work provided for in the contract being constructed under these specifications. Payment Bbnd shall remain in force until all payments as above stipulated are made. d. OTHER BONDS: Such other bonds as may be required by these Contract Documents shall be furnished by the Contractor. No sureties will be accepted by the Owner which are at the time in default or delinquent on any bonds or which are interested in any litigation against the owner. All bonds shall be made on the forms furnished by the Owner and shall be executed by. an approved surety company doing business in the City of Fort Worth, Texas, and which is acceptable to the owner. In order to be acceptable, the name of the surety I shall be included on the current U.S. Treasury list of acceptable sureties, and the amount of bond written by any one acceptable company shall not exceed the amount shown on the ITreasury list for that company. Each bond shall be properly executed by both the Contractor and Surety Company. Should any surety on the contract be determined unsatisfactory at any time by the Owner, notice will be given the Contractor to that effect and the Contractor shalt immediately provide a C3-3 (3) H I new surety satisfactory to the Owner. No payment will be made I under the contract until the new surety or sureties, as required, have qualified and have been accepted by the Owner. The contract shall not beoperative nor will any payments be due or paid until approval of the bonds bytheOwner. C3-3.8 EXECUTION OF CONTRACT: Within ten (10) days after the Owner has by appropriate resolution, or otherwise, awarded the contract•, the Contractor shall execute and file with the Owner the Contract and such bonds as may be required in the Contract Documents. I No contract shall be binding upon the owner until it has been attested by the City Secretary, approved as to form and legality by the City Attorney, and executed for the Owner by either the Mayor or City Manager. C3-3.9 FAILURE TO EXECUTE CONTRACT: The failure of the I Awardee to execute the required bond or bonds or to sign the required contract within ten (10) days after the contract is awarded shall be considered by the Owner as an abandonment of his proposal, and the Owner may annul the Award. By reason of the uncertainty of the market prices of material and labor, and it being impracticable and difficult to accurately determine the amount of damages occuring to the Owner by reason of said awardee's failure to execute said bonds and contract within ten (10) days, the proposal security accompanying the proposal shall be the agreed amount o -f damages which Owner will suffer by reason of such failure on the part of the Awardee and shall thereupon immediately be forfeited to the Owner. The filing of a proposal will be considered as an acceptance of this provision by the Bidder. C3 -3.1O BEGINNING WORK: The Contractor shall not commence work until authorized in writing to do by so the Owner. Should the Contractor fail to commence work at the site of the project within the time stipulated in the written I authorization usually termed the "Work Order" or "Proceed Order", it is agreed that the Surety Company will, within ten (10) days after the commencement date set forth in such written authorization, commence the physical execution of the contract. C3-3.11 INSURANCE: The Contractor shall not commence work under this contract until he has obtained all the insurance required under the Contract Documents, and such insurance has been approved by the Owner. The prime Contractor shall be responsible for delivering to the Owner the sub -contractors' I C3-3 (4) 1 I certificate of insurance for approval. The pp prime contractor shall indicate on the certificate of insurance included in the documents for execution whether or not his insurance covers sub -contractors. it is the intention of the Owner that the insurance coverage required herein shall include the coverage of all sub -contractors. a. COMPENSATION INSURANCE: The Contractor shall maintain,' during the life of this contract, I. Workers' Compensation Insurance on all of his employees to be engaged in work on the project under this contract, and for all sub -contractors. In case any class of employees engaged in hazardous work on the project under this contract is not protected under the Workers' Compensation Statute, I the Contractor shall provide adequate employer's general liability insurance for the protection of such of his employees not so protected. Ib. COMPREHENSIVE GENERAL LIABILITY INSURANCE: The Contractor shall procure and shall maintain during I the life of this contract Contractor's Comprehensive General Liability Insurance (Public Liability and Property Damage Insurance) in an amount not less than $500,000 covering each I occurrence on account of bodily injury, including death, and in an amount not less than $500,000 covering each occurrence on account of property damage with $2,000,000 umbrella policy coverage. c. ADDITIONAL LIABILITY: The Contractor shall furnish insurance as separate policies or by additional endorsement to one of the above -mentioned policies, and in the amount as set forth for public liability and property damage, the following insurance: 1. Contingent Liability (covers General Contractor's Liability for acts of sub -contractors). 2. Blasting, prior to any blasting being done. 3. Collapse of buildings or structures adjacent to excavation (if excavations are to be performed adjacent to same). 4. Damage to underground utilities for $500,000. 1 I C3-3 (5) [I 1 5. Builder's risk (where above- round structures are involved). 6. Contractual Liability (covers all indemnification requirements of Contract). d. AUTOMOBILE INSURANCE - BODILY INJURY AND PROPERTY • DAMAGE: The Contractor shall procure and maintain, during the life of this Contract, Comprehensive • Automobile Liability insurance in an amount not less than $250,000 for injuries including accidental death to any one person and subject to the same limit for each person an amount not less than $500,000 on account of one accident, and automobile property damage insurance in an amount not less than $100,000. e. SCOPE OF INSURANCE AND SPECIAL HAZARD: The insurance required under the above rshall provide adequate protection for the Contractor and his sub -contractors, respectively, against damage claims which may arise from operations under this contract, whether such operations be by the insured or by anyone directly or indirectly employed by him, and also against any of the following special hazards which may be encountered in the performance of the Contract. f. a PROOF OF CARRIAGE OF INSURANCE: The Contractor shall furnish the Owner with satisfactory proof of coverage by insurance required in these Contract Documents in amounts and by carriers satisfactory to the Owner. (Sample attached.) All insurance requirements made upon the Contractor shall apply to the sub -contractor, should the Prime Contractor's insurance not cover the sub -contractor's work operations. LOCAL AGENT FOR INSURANCE AND BONDING: The insurance and bonding companies with whom the Contractor's insurance and performance, payment, maintenance and all such other bonds are written shall be represented by an agent or agents having an office located within the city limits of the I I C, I I I 1 1 I -•1 C3-3 (6) 1 City of Fort Worth, Tarrant County, Texas. Each such agent shall be a duly qualified, one upon whom service of process may be had, and must have authority and power to act on behalf of the insurance and/or bonding company to negotiate and settle with the City of Fort Worth, or any other claimant, any claims that the City of Fort Worth or I other claimant or any property owner who has been damaged, may have against the Contractor, insurance, and/or bonding company. If the local insurance representative is not so empowered by the insurance or bonding companies, then such authority must be vested in a local agent or claims officer residing in the Metroplex, the Fort Worth -Dallas area. The name of the agent or agents shall be set I forth on all of such bonds and certificates of insurance. fC3-3.12 CONTRACTOR'S OBLIGATIONS: Under the Contract, the Contractor shall pay for all materials, labor and services when due. C3-3.13 WEEKLY PAYROLL: A certified copy of each payroll covering payment of wages to all person engaged in work on the at the site of the project shall be furnished to the Iproject � Owner's representative within seven (7) days after the close of each payroll period. A copy or copies of the applicable minimum wage rates as set forth in the Contract Documents shall be kept posted in a conspicuous place at the site of the project at all times during the course of the Contract. Copies of the wage rates will be furnished the Contractor, by the Owner; however, posting and protection of the wage rates shall be the responsibility of the Contractor. C3-3.14 CONTRACTOR'S CONTRACT ADMINISTRATION: Any Contractor, whether a person, persons, partnership, company, firm, association, corporation or other who is approved to do I business with and enters into a contract with the City for of water and/or sanitary sewer facilities, will construction have or shall establish a fully operational business office within the Fort Worth -Dallas metropolitan area. The Contractor shall charge, delegate, or assign this office (or full he may delegate his Project Superintendent) with authority to transact all business actions required in the performance of the Contract. This local authority shall be made responsible to act for the Contractor in all matters pertaining to the work governed by the Contract whether it be administrative or otherwise and as such shall be empowered, thus delegated and directed, to settle all material, labor or other expenditures, all claims against -the work or any other IC3-3 (7) I [1 H 1 matter associated such as maintaining adequate and ' ariate insurance or security coverage for the project. Suchlocalauthority for administration of the work under the Contract shall be maintained until all business transactions executed as part of the Contract are complete. Should the Contractor's principal base of operations be other than in the Fort Worth -Dallas metropolitan area, notification of the Contractor's assignment of local authority shall be made in writing to the Engineer in advance of any work on the project,all appropriately signed and sealed, as applicable, by the Contractor's responsible officers with the understanding that this written assignment of authority to a local representative shall become part of the project Contract as though bound directly into the project documents. The intent of these requirements is that all matters associated with the Contractor's administration, whether it be oriented in furthering the work, or other, be governed direct by local authority. This samerequirementis imposed on insurance and surety coverage. Should the Contractor's local representative fail to perform to the satisfaction of Engineer, the Engineer, at his sole discretion, may demand that such local representative be replaced and the Engineer may, at his sole discretion, stop all work until a new local authority satisfactory to the Engineer is assigned. No credit of working time will be for periods in which work stoppages are in effect for this reason. C3-3.15 VENUE: Venue of any action hereinunder shall be exclusively in Tarrant County, Texas. I I I I I -I C3-3 (8) I I I LI I LI I I I C� LI I I I I I I I PART C - GENERAL CONDITIONS C4-4 SCOPE OF WORK SECTION C4-4 SCOPE OF WORK C4-4.1 INTENT OF CONTRACT DOCUMENTS: It is the definite intention of these Contract Documents to provide for a complete, useful project which the Contractor undertakes to constructor furnish, all in full compliance with the requirements and intent of the Contract Documents. It is definitely understood that the Contractor shall do all work as provided for in the Contract Documents, shall do all extra or special work as may be considered by the Owner as necessary to complete the project in a satisfactory and acceptable manner. The Contractor shall, unless otherwise specifically stated in these Contract Documents, furnish all labor, tools, materials, machinery, equipment, special services, and incidentals necessary to the prosecution and completion of the project. C4-4.2 SPECIAL PROVISIONS: Should any work or conditions which are not thoroughly and satisfactorily stipulated or covered by General or Special Conditions of these Contract Documents be anticipated, or should there be any additional proposed work which is not covered by these Contract Documents, then "Special Provisions" covering all such work will be prepared by the Owner previous to the time of receiving bids or proposals for such work and furnished to the Bidder in the form of Addenda. All such "Special Provisions" shall be considered to be a part of the Contract Documents just as though they were originally written therein. C4-4.3 INCREASED OR DECREASED QUANTITIES: The Owner reserves the right to alter the quantities of the work to be performed or to extend or shorten the improvements at any time when and as found to be necessary, and the Contractor shall perform the work as altered, increased or decreased at the unit prices. Such increased or decreased quantity shall not be more than 25 percent of the contemplated quantity of such item or items. When such changes increase or decrease the original quantity of any item or items of work to be done or materials to be furnished by the 25 percent or more, then either party to the contract shall upon written request to the other party be entitled to a revised consideration upon that portion of the work above or below the 25 percent of the original quantity stated in the proposal; such revised consideration to be determined by special agreement or as hereinafter provided for "Extra Work." No allowance will be made for any changes in anticipated profits nor shall such changes be considered as C4-4 (1) C waiving or invalidating any conditions or provisions of the Contract Documents. Variations in quantities of sanitary sewer categories, shall be interpreted herein as overall quantities or sanitary sewer pipe i n C4-4.4 ALTERATION OF CONTRACT DOCUMENTS: By Change Order, the Owner reserves the right to make such changes in the Contract Documents and in the character or quantities of the work as may be necessary or desirable to insure completion in the most satisfactory manner, provided such changes do not materially alter the original Contract Documents or change the general nature of the project as a whole. Such changes shall not be considered as waiving or invalidating any condition or provision of the Contract Documents. C4-4.5 EXTRA WORK: Additional work made necessary by changes and alterations of the Contract Documents or of quantities or for other reasons for which no prices are provided in the Contract Documents, shall be defined as "Extra Work" and shall be performed by the Contractor in accordance with these Contract Documents or approved additions thereto; provided, however, that before any extra work is begun a "Change Order" shall be executed or written order issued by the Owner to do the work for payments or credits as shall be determined by one or more combination of the following methods: ' a. Unit bid price previously approved. b. An agreed lump sum. c. The actual reasonable cost of (1) labor, (2) rental of equipment used on the extra work for the time so used at Associated General Contractors of America current equipment rental rates; (3) materials entering permanently into the project, and (4) actual cost of insurance, bonds, and social security as determined by the Owner, plus a fixed fee to be agreed upon but not to exceed 10% of the actual cost of such extra work. The fixed fee is not to include any additional profit to the Contractor for rental of equipment owned by him and used for the extra work. The fee shall be full and complete compensation to cover the cost of superintendence, overhead, other profit, general and all other expense not included in (1), (2), (3), and (4) above. The Contractor shall keep accurate cost records on the form and in the method C4-4 (2) suggested by the Owner and shall give the Owner access to all accounts, bills, vouchers, and records relating to the Extra Work. No "Change Order" shall become effective until it has been _ approved and signed by each of the Contracting parties. No claim for Extra Work of any kind will be allowed unless ordered in writing by the Owner. In case any orders or instructions, either oral or written, appear to the Contractor to involve Extra Work for which he should receive compensation, he shall make written request to the Engineer for written orders authorizing such Extra Work, prior •to beginning such work. Should a difference arise as to what does or does not constitute Extra Work, or as to the payment thereof, and the Engineer insists upon its performance, the Contractor shall proceed with the work after making written request for written orders and shall keep an accurate account of the actual reasonable cost thereof as provided under method (Item C). Claims for extra work will not be paid unless the Contractor shall file his claim with the Owner within five (5) days before the time for making the first estimate after such work is done and unless the claim is supported by satisfactory 'ti vouchers and certified payrolls covering all labor and materials expended upon the said Extra Work. , The Contractor shall furnish the Owner such installation Documents records of all deviations from the original Contract as may be necessary to enable the Owner to prepare for of showing the actual permanent record a corrected set plans I installation. The compensation agreed upon for 'extra work' whether or not Iiniitiated by a 'change order' shall be a full, complete and final payment for all costs Contractor incurs as a result or relating to the change or extra work, whether said costs are I known, unknown, foreseen or unforeseen at that time, including without limitation, any costs for delay, extended overhead, ripple or impact cost, or any other effect on changed or unchanged work as a result or the change or extra work. C4-4.6 SCHEDULE OF OPERATIONS: Before commencing any work 'under this contract, the Contractor shall submit to the Owner and receive the Owner's approval thereof, a "Schedule of Operations," showing by a straight line method the date of commencing and finishing each of the major elements of the I contract. There shall be also shown the estimated monthly cost of work for which estimates are -to be expected. There 1 C4-4 (3) e shall be presented also a composite graph showing the anticipated progress of construction with the time being plotted horizontally and the percentage of completion plotted vertically. The progress charts shall be prepared on 8-1/2" x 11" sheets and at least five black or blue line prints shall be furnished to the Owner. C4-4.7 PROGRESS SCHEDULES FOR WATER AN SEWER PLANT FACILITIES: Within ten (10) I days first month! prior to submission of y progress payment, the Contractor shall prepare and submit to the Owner for approval six copies of the schedule in which the Contractor proposes to carry on the work, the date of which he will start the several major activities (including procurement of materials, equipment) and the contemplated dates for completing the same. The schedule shall be in the form of a time schedule Critical Path Method (CPM) network diagram. As the work progresses, the Contractor shall enter on the diagram the actual progress at the end of each partial payment period or at such intervals as directed by the Engineer. The Contractor shall also revise the schedule to reflect any adjustments in contract time approved by the Engineer. Three copies of the updated schedule shall be delivered at such intervals as directed by the Owner. As a minimum, the construction schedule shall incorporate all work elements and activities indicated in the proposal and in the technical specifications. Prior to the final drafting of the detailed construction schedule, the Contractor shall review the draft schedule with the Engineer to ensure the Contractor's understanding of the contract requirements. The following guidelines shall be adhered to in the construction schedule: preparing a. Milestone dates and final project completion dates shall be I developed to conform to time constraints, sequencing requirements completion time. and b. The construction process shall be divided into activities with time durations of approximately fourteen (14) days and construction values not to exceed $50,000. Fabrication, delivery and submittal activities are exceptions to this guideline. -I C4-4 (4) I I 1 c. Durations shall be in calendar days and normal holidays and weather conditions over the duration of the contract shall be accounted for within the duration of each activity. d. One critical path shall be shown on the construction schedule. Ie. Float time is defined as the amount of time between the earliest start date and the latest start date of a chain of activities of the CPM I construction schedule. Float time is not for the exclusive use or benefit of either the Contractor or the Owner. f. Thirty days shall be used for submittal review unless otherwise specified. The construction schedule shall as a minimum be divided into general categories as indicated in the Proposal and Technical Specifications and each general category shall be I broken down into activities in enough detail to achieve activities of approximately fourteen (14) days duration. For each general category, the construction schedule shall identify all trades or subcontracts whose work is represented by activities that follow the guidelines of I this Section. For each of the trades or subcontracts, the construction schedule shall indicate the following procurements, I construction and preacceptance activities and events in their logical sequence for equipment and materials. I 1. Preparation and transmittal of submittals. 2. Submittal review periods. I 3. Shop fabrication and delivery. 4. Erection or installation. I5. Transmittal of manufacturer's operation and maintenance instructions. I6. Installed equipment and materials testing. 7. Owner's operator instruction (if applicable). I8. Final inspection. 1 C4-4 (5) 1 9. Operational testing. 10. Final inspection. If, in the Opinion p on of the Owner, work accomplished falls behind that scheduled, the Contractor shall take such action as necessary to improve his progress. In addition, the Owner may require the Contractor to submit schedule a revised demonstrating his program and ed plan to make up lag in scheduled progress and to insure completion of the work within the contract time. If the the Owner finds proposed plan not acceptable, he may require the Contractor to increase the work force, the construction plant and equipment, the number of work shifts or the overtime operations without additional cost to the Owner. Failure of the Contractor to comply with these requirements shall be considered grounds for determination that 91 by the Owner the Contractor is failing to prosecute the work with such diligence as will insure its completion within the time specified. I Lii LI I __1 C4-4 (6) 1 LI I PART C - GENERAL CONDITIONS I C5-5 CONTROL OF WORK AND MATERIALS I ______ SECTION C5-5 CONTROL OF WORK AND MATERIALS IC5-5.1 AUTHORITY OF ENGINEER: The work shall be performed to the satisfaction of the Engineer and in strict compliance with the Contract Documents. He shall decide all questions which I arise as to the quality and acceptability of materials furnished, work performed, rate of progress of the work, overall sequence of the construction,' interpretation of the Contract Documents, acceptable fulfillment of the contract, compensation, mutual rights between Contractor and Owner under these Contract Documents, supervision of the work, resumption of operations, and all other questions or disputes which may Iarise. Engineer will not be responsible for Contractor's means, methods, techniques, sequences or procedures of construction, or the safety precaution and programs incident thereto, and he will not be responsible for Contractor's failure to perform the work in accordance with the contract documents. He shall determine the amount and quality of the work completed and materials furnished, and his decisions and estimates shall be final. His estimates in such event shall be a condition to the right of the Contractor to receive money due him under the Contract. The Owner shall have executive authority to enforce and make effective such necessary decisions and orders as the Contractor fails to carry out promptly. t In the event of any dispute between the Engineer and Contractor over the decision of the Engineer on any such matters, the Engineer must, within a reasonable time, upon written request of the Contractor, render and deliver to both Ithe Owner and Contractor, a written decision on the matter in controversy. C5-5.2 CONFORMITY WITH PLANS: The finished project in all cases shall conform with lines, grades, cross -sections, finish, and dimensions shown on the plans or any other requirements otherwise described in the Contract Documents. I Any deviation from the approved Contract Documents required by the Engineer during construction will in all cases be determined by the Engineer and authorized by the Owner by Change Order. CS -5 (1) C5-5.3 COORDINATION OF CONTRACT DOCUMENTS: The Contract Documents are made up of several sections, which, taken together, are intended to describe and provide for a complete and useful project, and any requirements appearing the sections is as binding as though it occurred ineaof ll sections. In case of discrepancies, figured dimension shall govern over scaled dimensions, plans shall specifications, special conditions shall govl govern -over conditions and standard specifications andern overgenera' u on the plans shall govern over those shown inthe 1proposal . The Contractor shall not take advantage of and the a or omission in the Contract Documents, y nOwnerrent shall be permitted to make such corrections n or interpretations as may be deemed necessary for the fulfillment of the intent of the Contract Documents. In the event the Contractor discovers an apparent error or discrepancy, he shall immediately call this condition to the attention of the Engine In t conflict in the drawings, specifications, or otherhe event of a the Contract Documents which were not reported portions of e award of Contract, the Contractor shall be deemed otothave quoted the most expensive resolution of the conflict. C5-5.4 COOPERATION OF CONTRACTOR: furnished with three sets of the Contract eDocuments oand lshall have available on the site of the project at all times one set of such Contract Documents. The Contract shall give to the work the constant attention necessary to facilitate the progress thereof and shall cooperate with the Engineer, his inspector, and other Contractors in every possible way. The Contractor shall at all times have competent personnel available to the project site for proper ance of the work. The Contractor shall provide and maintainmat all times at the site of the project a competent, English-speakin superintendent and an assistant who are fully authorized to act as the Contractor's agent on the work. Such superintendent and his assistant shall be capable of reading and understanding the Contract Documents and shall receive and fulfill instructions from the Owner, authorized representatives, the Engineer, or his nto this resp of the Contractor, the Contractor shall designateoin writing to the project superintendent, to act agent on the work.Such as the Contractor's shall be a resident of TarrantstantCounproTex t superintendent hall be subject to call, as is the project Superintendent,xas atd sany time of the day or night on any day of the week Engineer determines that circumstances require the which the n the project site of a representative of the presence on Contractor to C5-5 (2) I r r C P L `-1 iT u r fl 1 adequately provide for the safety or convenience of the traveling public or the owners of property across which the project extends or the safety of property contiguous to the project routing. 1 The Contractor shall provide all facilities to enable the Engineer and his inspector to examine and inspect the workmanship and materials entering into the work. c5-5.5 5 EMERGENCY AND/ORI RECTIFICATION WORK: When, in the opinion of the Owner or Engineer, a condition of emergency I exists related to any part of the work, the Contractor, or the Contractor through his designated representative, shall respond with dispatch to a verbal request made by the Owner or 1 Engineer to alleviate the emergency condition. Such a response shall occur day or night, whether the project is scheduled on a calendar -day or on a working -day basis. Should the Contractor fail to respond to a request from the Engineer to rectify any discrepancies, omissions, or corrections necessary to conform with the requirements of the project specifications or plans, the Engineer shall give the to be Contractor written notice that such work or changes are shall direct attention to the performed. The written notice discrepant condition and request the Contractor to take I� remedial action to correct the condition. In the event the fulfill this Contractor does not take positive steps to does not show just cause for not taking written request, or the proper action, within 24 hours, the City may take such remedial action with City forces or by contract. The City for shall then deduct an amount equal to the entire costs such I remedial action, plus 25%, from any funds due the Contractor on the project. C5-5.6 FIELD OFFICE: The Contractor shall provide, at no the I extra compensation, an adequate field office for use of if specifically called for. The field office shall Engineer, be not less than 10 by 14 feet in floor area, substantially constructed, well heated, air conditioned, lighted, and not be damaged by the weather-proof,so that documents will elements. IC5-5.7 CONSTRUCTION STAKES: The City, through its Engineer, will furnish the Contractor with all lines, grades, and and control I measurements necessary to the proper prosecution the work contracted for, under these Contract Documents, and of lines, grades and measurements will be established by means of be found stakes or other customary method of marking as may consistent with good practice. C5-5 (3) Ti L These stakes or markings shall be set sufficien of construction operations to avoid markings as may dela t1Y in advance guidance shall bee established for the Such stakes or authorized by preserved by Co.Cntractor's use or the En the Contractor until he is opinion of the En Engine to remove them. Whcarelessly or willfully' any stakes or eeVer, in the the Contractor orany y destroyed, disturbed markings have emby been replacing such stakes or of his employees °r removed of against the Contractor ' the full cost d and the full amount 25will wll be deducted ed from payment due the Contractor. be C5-5.8 AUTHORITY AND DUTIES OF Inspectors will be authorized to inspectTY INSPECTORS. d RS : be done and all materials furnished, all Work City extend to all or any done and to part of the work Such inspection may manufacturing of the materials to ' and the installed. A City Inspector be used Preparation or or equip work be o report to the Engineer may be stationed on the to manner in which iis being s to the progress of the that the materials being performed wyrk and the g furnished or the workybet inyg evidence by the Contractor fails to fulfill the re u• Contract Documents, and to n performed Contractor to any call the atte attention of the inspection such failure or other infrin °f the or lack of inspection will gements. Such Contractor from any obligation to accordance with the requirements of the not relieve the In case of any perform the work in dispute arising between the Contract Documents. City Inspector as to the materials or Contractor the manner of equipmentand the authoritynmanner performing the work, the furnished etrwillor have thto reject materials or equi Inspector d decided work until by question at issue can be referred to and be dowever, the Engineer. Theto and be be authorized to revoke, City Inspector will not, any requirement of these Contract Documents r accept any portion or section c the work, enlarge, or release i c apt any ionornor to approve any Documents. Contrary to the requiremensnofr to issue He will in no case act as °f the Contract foreman or perform any superintendent or o= interfere with the manageoperation of the work. He ment ties for the will not accept from the Contractor an C°ntractor, or y form for performing any duties. Y compensation in any and obey the directions and instructions of theThe Contractorci or Engineer when the same are consistent with t hall regard of the Contract Documents he obligations Contractor object to an Provided, however Inspector y orders or instructions should the the Contractor may within six da s of the City appeal to the Engineer for his decision on o make written controversy, the matter in C5-5 (4) L C I C5-5.9 INSPECTION: The Contractor shall furnish the Engineer with every reasonable facility for ascertaining whether or not the work as performed is in accordance with the requirements of the Contract Documents. If the Engineer so requests, the Contractor shall, at any time before acceptance of the work, remove or uncover such portion of the finished work as may be directed. After examination, the Contractor shall restore said portions of the work to the standard required by the Contract•Documents. Should the work exposed or examined prove acceptable, the uncovering or removing and replacing of the covering or making good of the parts removed shall be paid for as extra work, but should be work so exposed or examined prove to be unacceptable, the uncovering or removing and the replacing of all adjacent defective or damaged parts shall be at the Contractor's expense. No work shall be done or materials used without suitable supervision or inspection. C5-5.10 REMOVAL OF DEFECTIVE AND UNAUTHORIZED WORK: All work, materials, or equipment which has been rejected shall be remedied or removed and replaced in an acceptable manner by the Contractor at his own expense. Work done beyond the lines and grades given or as shown on the plans, except as herein specifically provided, or any Extra Work done without written l authority, will be considered as unauthorized and done at the expense of the Contractor and will not be paid for by the Owner. Work so done may be ordered removed at the Contractor's expense. Upon the failure on the part of the Contractor to comply with any order of the Engineer made under the provisions of this paragraph, the Engineer will have the authority to cause defective work to be remedied or removed and replaced and unauthorized work to be removed, and the cost thereof may be deducted from any money due or to become due to the Contractor. Failure to require the removal of any defective or unauthorized work shall not constitute acceptance of such works. C5-5.11 SUBSTITUTE MATERIALS OR EQUIPMENT: If the Specifications, law, ordinance, codes or regulations permit Contractor to furnish or use a substitute that is equal to any material or equipment specified, and if Contractor wishes to furnish or use a proposed substitute, he shall, prior to the preconstruction conference, make written application to ENGINEER for approval of such substitute certifying in writing that the proposed substitute will perform adequately the functions called for by the general design, be similar and of equal substance to that specified and be suited to the same use and capable of performing the same function as that specified; and identifying all variations of the proposed IC5-5 (5) 7 1 substitute from that specified and indicating available maintenance service. No substitute shall be ordered or installed without the written approval of Engineer who will be the judge of the equality and may require Contractor to furnish such other data about the proposed substitute as he considers pertinent. No substitute shall be ordered or installed without such performance guarantee and bonds as Owner may require which shall be furnished at Contractor's expense., Contractor shall indemnify and hold harmless Owner and Engineer and anyone directly or indirectly employed by either of them from and against the claims, damages, losses and expenses (including attorneys fees) arising of out of the use substituted materials or equipment. c5 -s.12 SAMPLES AND TESTS OR MATERIALS: Where in the of the Engineer, or l 1 as called for in the Contract Documents, tests of materials or equipment are necessary, such tests will be made at the expense of and paid for direct to the testing agency by the Owner unless otherwise specifically provided The failure of the Owner to make any testsof materials shall be in no way relieve the Contractor of his responsibility furnishing materials of and equipment fully conforming to the requirements of the Contract Documents. Tests and sampling of materials, unless otherwise specified, will be made in accordance with the latest methods prescribed by. the American Society for Testing Materials or specific requirements of the Owner. The Contractor shall provide such facilities Engineer as the may require for collecting and forwarding samples and shall not, without specific written p Engineer, use the materials represented bythe lsamples until tests have been made and the materials approved for use. The Contractor will furnish adequate samples without Owner. charge to the In case of concrete, the aggregates, design minimum, and the mixing and transporting equipment shall be a Engineer before any concrete is PProved by the d shall be Contactor responsible for replacing any Concrete oplaccretewhichdoesnot meet the requirements of the Contract Documents. Tests shall be made at least 9 days prior to the placing of concrete, using samples from the same aggregate, cement, and mortar which are to be used later in the concrete. Should the source of supply change, new tests shall be made the new materials. prior to the use of C5-5.13 STORAGE OF MATERIALS:Allmaterialso used in the e construction operation shall be stored soasto insure the preservation of the quality fitness I and of the work. When directed by the Engineer, they shall be placedo platforms or other hard, clean durable surfaces and not onthe -- C5-5 (6) 1 I I I I I I I I I I I I L� I I I ground, and shall materials shall b prompt inspection. e be placed under cover when directed. Stored placed and located so as to facilitate C5-5.14 EXISTING STRUCTURES AND UTILITIES: The location and dimensions shown on the Plans relative to existing utilities are based on the best information available. Omission from, or the inclusion of utility locations on the Plans is not to be considered as the nonexistence of, or a definite location of, existing underground utilities. The location of many gas mains, water mains, conduits, sewer lines and service lines for all utilities, etc., is unknown to the Owner, and the Owner assumes no responsibility for failure to show any or all such structures and utilities on the plans or to show them in their exact location. it is mutually agreed that such failure will not be considered sufficient basis for claims for additional compensation for Extra Work or for increasing the pay quantities in any manner whatsoever, unless an obstruction encountered is such as to necessitate changes in the lines and grades of considerable magnitude or requires the building of special works, provision for which is not made in the Contract Documents, in which case the provision in these Contract Documents for Extra Work shall apply. It shall be the Contractors responsibility to verify locations of adjacent and/or conflicting utilities sufficiently in advance of construction in order that he may negotiate such local adjustments as necessary in the construction process to provide adequate clearances. The Contractor shall take all necessary precautions in order to protect all existing utilities, structures and service lines. Verification of existing utilities, structures and service lines shall include notification of all utility companies at least forty eight (48) hours in advance of construction including exploratory excavation if necessary. All verification of existing utilities and their adjustment shall be considered as subsidiary work. C5-5.15 INTERRUPTION OF SERVICE: a. Normal Prosecution: In the normal prosectuion of work where the interruption of service is necessary, the Contractor, at least 24 hours in advance, shall be required to: 1. Notify the Water Department's Distribution Division as to location, time, and schedule of service interruption. C5-5 (7) J 2. each responsible otime and schedule of the interruption of their service, or 3. In the event that personal notification of a customer cannot be made, a prepared to shall be attached to the customer s g form � door knob. The to entrance shall b composition, and in large bold type shall say: "NOTICE" Due to Utility Improvement in your neighborhood, your (water) (sewer) service will be inter- rupted on the hours of between and This inconvenience will be as short as Possible. Thank you, Contractor Address Phone b. Emer_ g_ ency; In the event that an unforeseen service interruption occurs, notice shall be as above,but immediate. C5-5.16 MUTUAL RESPONSIBILITY OF CONTRACTORS. If, through acts or neglect on the part of the Contractor, any other Contractor or any sub -contractor shall suffer loss ordamage on the work, the Contractor agrees to settle with such other Contractor or sub -contractor by agreement or arbitration such other Contractor or sub -contractor shall assert . If against the Owner on account of any damage alleged ntochave been sustained, the Owner will notify t shall indemnify and save harmless the O who ner against an s claim. ysuch CS -5.17 CLEAN -Up: Clean-up of surplus and/or waste materials accumulated on the job site during the prosecution of the work under these Contract Documents shall be accomplished keeping with a daily routine established to the in satisfaction of the Engineer. Twent the the written notice is given to the Contractor that the clean -u y -fours fours after the job site is proceeding in a manner unsatisfactor to the Engineer, if the P on Contractor fails to correct the C5-5 (8) r C I I L I I I I I I I I I I I unsatisfactory procedure, the City may take such direct action as the Engineer deems appropriate to correct the clean-up deficiencies cited to the Contractor in the written notice, and the costs of such direct action, plus 25% of such costs, shall be deducted from monies due or to become due to the Contractor. Upon the completion of the project as a whole as covered by these Contract Documents, and before final acceptance and final payment will be made, the Contractor shall clean and remove from the site of the project all surplus and discarded materials, temporary structures, and debris of every kind. He shall leave the site of all work in a neat and orderly condition equal to that which originally existed. Surplus and waste materials removed from the site of the work shall be disposed of at locations satisfactory to the Engineer. The Contractor shall thoroughly clean all equipment and materials installed by him and shall deliver over such materials and equipment in a bright, clean, polished and new appearing condition. No extra compensation will be made to the Contractor for any clean-up required on the project. C5-5.18 FINAL INSPECTION: Whenever the work provided for in and contemplated under the Contract Documents has been satisfactorily completed and final cleanup performed, the Engineer will notify the proper officials of the Owner and request that the Final inspection be made. Such inspection will be made within 10 days after such notification. After such final inspection, if the work and materials and equipment are found satisfactory, the Contractor will be notified in writing of the acceptance of the same after the proper resolution has been passed by the City Council. No time charge will be made against the Contractor between said date of notification of the Engineer and the date of final inspection of the work. C5-5 (9) PART C - GENERAL CONDITIONS C6-6 LEGAL RELATIONS AND PUBLIC RESPONSIBILITY 6- SECTION C6-6 LEGAL RELATIONS AND PUBLIC RESPONSIBILITY . C6-6.1 LAWS TO BE OBSERVED: The Contractor shall at all times O observe and comply with all- Federal and State Laws and City ordinances and regulations which in any way affect the conduct of the work or his operations, and shall observe and comply with all orders, laws, ordinances and regulations which exist or which may be enacted later by bodies having jurisdiction or authority for such enactment. No plea of misunderstanding or ignorance thereof will be considered. The Contractor and his Sureties shall indemnify and save harmless the City and all of its officers, agents, and employees against any and all claims or liability arising from or based on the violation of any such law, ordinance, regulation, or order, whether it be by himself or his employees. C6-6.2 PERMITS AND LICENSES: The Contractor shall procure all permits and licenses, pay all charges, costs and fees, and give all notices necessary and incident to the due and lawful prosecution of the work. '' C6-6.3 PATENTED DEVICES, MATERIALS AND PROCESSES: If the Contractor is required or desires to use any design, device, material, or process covered by letter, patent, or copyright, he shall provide for such use by suitable legal agreement with the patentee or owner of such patent, letter, or copyrighted design. It is mutually agreed and understood that without exception the contract prices shall include all royalties or cost arising from patents, trade marks, and copy rights in any way involved in the work. The Contractor and his sureties shall indemnify and save harmless the Owner from any and all claims for infringement by reason of the use of any such patented design, device, material or process, or any trade -mark or copy right in connection with the work agreed to be performed under these Contract Documents, and shall indemnify the Owner for any cost, expense, or damage which it may be obliged to pay by reason of such infringement at any I time during the prosecution of the work or after completion of the work, provided, however, that the Owner will assume the responsibility to defend any and all suits brought for the infringement of any patent claimed to be infringed upon by the design, type of construction or material or equipment specified in the Contract Documents furnished the Contractor by the Owner, and to hold the Contractor harmless on account of such suits. r C6-6 (1) 1 LI 1 C6-6.4 SANITARY PROVISIONS: The Coshall and enforce among his employees lto suchregulationsin regard cleanliness and disposal of garbage and waste as will tend too prevent the inception and spread of infectious diseases or contagious and to effectively prevent the creation of about the work a nuisance on any property either public or privates and such regulations as are required by immediate force and effect by the Contractorhall be put into sanitary conveniences necessar for use of laborers one the work, properly secluded from public observation, shall be constructed and maintained by the Contractor shall be and their use strictly enforced by the Contractor. All facilities shall be kept in l a clean and sanitary condition, free from objectionable odors so as not to cause a All sanitary laws and regulations of the State of Texas City shall be andthe strictly complied with. C6-6.5 PUBLIC SAFETY AND CONVENIENCE: Materials or equipment stored about the work shall be so placed and used, and the work shall at all times be so conducted greater obstruction to cause or inconvenience to the us ino Public than he considered to be absolutely necessary s by Contractor is required to maintain at all times he 1phases neer Tof his all work in such a manner as not to impair the safety convenience of the public, including, but not limited to, safe and convenient ingress and egress to property contiguous to the work area. The Contractor shall make adequate provisions to render reasonable ingress and egress for normal vehicular traffic, except during actual trenching or operations, pipe installation at all driveway crossings. Such include bridging, ions may placement of crushed stone or gravels or such other means of providing proper ingress and egress for the property served by the driveway as the Engineer may appropriate. a Such other means may include the diversion oas driveway traffic, with specific f approval by the Engineer. If diversion of traffic is approved by the Engineer location, the Contractor at any shall make arrangements satisfactory to the Engineer at any location, the Contractor shall make arrangements satisfactory to the Engineer for the diversion traffic, and shall, of at his own expense, provide all materials and perform all work necessary for the construction maintenance and of roadways and bridges for such diversion traffic. Sidewalks of must not be obstructed except by special permission of the Engineer. The materials excavated and the construction materials such as pipe used in the construction of the work shall be placed so as not to endanger the work or prevent free access to all fire hydrants, fire alarm boxes, Police call boxes, water valves, - I C6-6 (2) 1 gas valves, or manholes in the vicinity. The Owner reserves the right to remedy any neglect on the part of the Contractor as regards to public convenience and safety which may come to its attention, after twenty-four hours notice in writing to the Contractor, save in cases of emergency when it shall have the right to remedy any neglect without notice, and in either case, the cost of such work done or materials furnished by the Owner or by the City shall be deducted from monies due or to I become due to the Contractor. The Contractor, after.approval of the Engineer, shall notify the Fire Department Headquarters, Traffic Engineer, and Police be Department, when any street or alley is requested to closed or obstructed or any fire hydrant is to be made inaccessible, and, when so directed by the Engineer, shall keep any street, streets, or highways in condition for unobstructed use by fire apparatus. The Contractor shall promptly notify the Fire Department Headquarters when all such obstructed streets, alleys, or hydrants are again placed back in service. Where the Contractor is required to construct temporary I bridges or make other arrangements for crossing over ditches or streams, his responsibility for accidents in connection with such crossings shall include the roadway approaches as well as the structures of such crossings. The Contractor shall at all times conduct his operation and the use of construction machinery so as not to damage or I destroy trees and shrubs located in close proximity to or on the site of the work. Wherever any such damage may be done, the Contractor shall immediately satisfy all claims of property owners, and no payment will be made by the Owner in file the settlement of such claims. The Contractor shall with Engineer a written statement showing all such claims adjusted. IC6-6.6 PRIVILEGES OF CONTRACTOR IN STREETS, ALLEYS, AND RIGHT-OF-WAY: For the performance of the contract, the Contractor will be permitted to use and occupy such portions of the public streets and alleys, or other public places or other rights -of -way as provided for in the ordinances of the City, as shown in the Contract Documents, or as may be specifically authorized in writing by the Engineer. A reasonable amount of tools, materials, and equipment for construction purposes may be stored in such space, but no more than is necessary to avoid delay in the construction I operations. Excavated and waste materials shall be piled or stacked in such a way as not to interfere with the use of be designated to be left free and unobstructed spaces that may and so as not to inconvenience occupants of adjacent property. If the street is occupied by railway tracks, the work shall be C6-6 (3) I carried on in such manner as not to in terre with operation of trains, loading or unloading I of cars, etc.Other contractors of the Owner may, for all purposes required by the contract, enter upon the work and premises Contractor used bythe and shall be provided all reasonable facilities and assistance for the completion of adjoining work. Any additional grounds desired by the Contractor be ' for his use shall provided by him at his own cost and expense. C6-6.7 RAILWAY CROSSINGS: When the work encroaches upon right-of-way of any railway, the l any necessary easement for the work. Where cure the etracks the railway are to be crossed, the Contractor shall observe all regulations and instructions the of the railway company as to the methods of performing the work and take all ins for safety of property and the public. Negotiationstwith railway companies for the permits shall be done by City. The Contractor shall give the City and through the five days notice prior to the time of his intentions to beginnot l work ess than that portion of the project which is related to the railway properties. The Contractor will not be given additional compensation extra or for such railway crossings unless specifically set forth in the Contract Documents. C6-6.8 BARRICADES WARNINGS AND WAT carried on in or adjacent the work is to any streetNa ere place, the Contractor shall at his y, or public r own expense furnish, erect, and maintain such barricades, fences, lights signals, ' and danger shall provide such. watchmen, and shall take all such other precautionary measures for the protection of persons or property and of the work as are necessary. Barricades and fences shall be painted in a color that will night. be visible at From sunset to sunrise the Contractor shall furnish and maintain at least one easily visible burning light at each barricade. A sufficient number of barricades shall be and maintained erected to keep pedestrians away from, from being driven on or into, any lor work under c nstru ionand being maintained. The Contractor shall furnish keep them watchmen at their respective assignments in sufficient numbers to protect the work and prevent accident or damage. All installations and procedures s be provisions set forth in the "1980 Texas the ton Manual Unwith form Traffic Control Devices for Streets and Highways" issued the authority ' under of the "State of Texas Uniform Act Regulating Traffic on Highways", codified as Article 6701d Veron's Civil Statutes, pertinent sections being Section 31. Nos. 27, 29, 30 and C6-6 (4) I I I I I I I Li I The Contractor will not remove any regulatory sign, instructional sign, street name sign, or other sign which has been erected by the City. If it is determined that a sign must be removed to permit required construction, the Contractor shall contact the Transportation and Public Works department, Signs and Markings. Division (phone*number 8780-8075), to remove the sign. In the case of regulatory signs, the Contractor must replace the permanent sign with a temporary sign meeting the re.quirements of the above referenced manual and such temporary sign must be installed prior to the removal of the permanent sign. If the temporary sign is not installed correctly or if it does not meet the required specifications, the permanent sign shall be left in place until the temporary sign requirements are met. When construction work is completed to the extent that the permanent sign can be re -installed, the Contractor shall again contact the Signs and Markings Division to re -install the permanent sign and shall leave his temporary sign in place until such re -installation is completed. The Contractor will be held responsible for all damage to the work or the public due to failure of barricades, signs, fences, lights, or watchmen to protect them. Whenever evidence is found of such damage to the work the Engineer may I order the damaged portion immediately removed and replaced by the Contractor at the Contractor's own expense. The Contractor's responsibility for the maintenance of barricades, I signs, fences and lights, and for providing watchmen shall not cease until the project shall have been completed and accepted by the Owner. I I I ci I n I No compensation, except as specifically provided in these Contract Documents, will be paid to the Contractor for the work and materials involved in the constructing, providing, and maintaining of barricades, signs, fences, and lights or for salaries of watchmen, for the subsequent removal and disposal of such barricades, signs, or for any other incidentals necessary for the proper protection, safety, and convenience of the public during the contract period, as this work is considered to be subsidiary to the several items for which unit or lump sum prices are requested in the proposal. C6-6.9 USE OF EXPLOSIVES, DROP WEIGHT, ETC.: Should the Contractor elect to use explosives, drop weight, etc., in the prosecution of the work, the utmost care shall be exercised at all times so as not to endanger life or property. The Contractor shall notify the proper representative of any public service corporation, any company, individual, or utility, and the Owner, not less than twenty-four hours in C6-6 (5) I advance of the use of any activity which might damage or endanger their or his property along or adjacent to the work. Where the use of explosives is to be permitted on the as specified in the Special Contract Documents ocumnts,orthe use cof explosives is requested, the Contractor shall submit notice to the Engineer in writing twenty-four hours and shall furnish evidence that he has nsurance coverage rior to lto protect against any damages and/or injuries arising out of such use •of explosives. All claims arising out of the use of explosives investigated and a written report made by shall be tractoris insurers to the Engineer within ten (10) days after rnreceipt of written notice of the claim to the Contractor from either the City or the claimant. The City shall to the Contractor of any such claim, The proceed to give notice use of explosives may be suspended by the Engineer if any complaint is received and such use shall not be resumed until the cause of the complaint has been addressed. Whenever explosives are stored or kept, in a safe and secure manner and all stora hgey lacesll shall stored plainly marked "DANGEROUS EXPLOSIVES" and shallbeunder be the care of a competent watchman at all times. which explosives are being transported shall bell vehicles in d as mentioned above and shall, insofar as Plainly marked heavy traffic routes. Possible, not use C6-6.10 WORK WITHIN EASEMENTS: Where the work through, or into Property, the Owner will passes over, private right-of-way or easement Privileges as the Cityv ay deem necessary for the prosecution of the work. City may deem rights -of -way or work area considered necessary by the Contractor shall be provided by him at his own expense. Such additional rights -of -way or work area shall be acquired for the benefit of the City. The City shall be notified in writing as to the rights so acquired before work begins in the affected area. The Contractor shall not enter upon private property for any purpose without having permission from the owner of such property. The C ontrctor obtained will not be allowed to store equipment or material on private property unless and until the specified 'approval property owner has been secured in writing byeCr the and a copy furnished to the Engineer. Unless Specifically provided otherwise, the Contractor shall clear all rights -of -way or easements of obstructions which must be removed to make Possible proper prosecution of the work as a part of the project construction operations. The Contractor shall be responsible for the preservation ofand shall use r C6-6 (6) every precaution to prevent damage to all trees, shrubbery, plants, lawns, fences, culverts, curbing, and all other types of structures or improvements, to all water, sewer, and gas lines, to all conduits, overhead pole lines, or appurtenances thereof, including the construction of temporary fences, and to all other public or private property along adjacent to the work. IThe Contractor shall notify the proper representatives, of owners or. occupants of public or private lands, or interest in lands which might be affected by the work. Such notice shall be made at least 48 hours in advance of the beginning of the work. Notices shall be applicable to both public and private utility companies or any corporation, company, individual, or other, either as owners or occupants, whose land or interest in land might affected by the work. The Contractor shall be responsible for all damage or injury to property of any I character resulting from any act, omission, neglect, or misconduct in the manner or method or execution of the work, or at any time due to defective work, material, or equipment. I When and where any direct or indirect or injury is done to public or private property on account of any act, omission, neglect, or misconduct in the execution of the work, or in I consequence of the non -execution thereof on the part of the Contractor, he shall restore or have restored at his own cost and expense such property to a condition at least equal to that existing before such damage or injury was done, by I repairing, rebuilding, or otherwise replacing and restoring as may be directed by the Owner, or he shall make good such damages or injury in a manner acceptable to the owner of the property and the Engineer. All fences encountered and removed during construction of this project shall be restored to the original or a better I than original condition upon completion of this project. When wire fencing, either wire mesh or barbed wire is to be crossed, the Contractor shall set cross braced posts on either side of permanent easement before the fence is cut. Should additional fence cuts be necessary, the Contractor shall provide cross braced posts at point of the proposed ' cut in addition to the cross braced posts provided at the permanent easements limits, before the fence is cut. Temporary fencing shall be erected in place of the fencing removed whenever the work is not in progress and when the site is vacated overnight, and/or at all times to prevent livestock from entering the construction area. The cost for fence removal, temporary closures and replacement shall be subsidiary to the various items bid in the project C6-6 (7) I proposal. Therefore, no separate payment shall be allowed for any service associated with this work. In case of failure on the part of the Contractor to restore such property to make good such damage or injury, I the Owner may, upon 48 hour written notice under ordinary circumstances, and without notice when a nuisance or hazardous condition results, proceed to repair, rebuild, or otherwise restore such propertyas, may be determined by the Owner to be necessary, and the cost thereby will be deducted from any monies due or to become due to the Contractor under this Contract. C6-6.11 INDEPENDENT CONTRACTOR: It is understood and agreed by the parties hereto that Contractor shall perform all work and services hereunder as an independent contractor, and not as an officer, agent, servant or employee of the Owner. Contractor shall have exclusive control of and the exclusive right to control the details of all the work and services performed hereunder, and all persons performing same, and shall be solely responsible for the acts and omissions of its officers, agents, servants, employees, contractors, subcontractors, licensees and invitees. The doctrine of respondeat superior shall not apply as between Owner and Contractor, its officers, agents, employees, contractors and subcontractors, and nothing herein shall be construed as creating a partnership or joint enterprise between Owner and Contractor. r C6-6.12 CONTRACTOR'S RESPONSIBILITY FOR DAMAGE CLAIMS: Contractor covenants and agrees to, and does hereby indemnify, hold harmless and defend Owner, its officers, agents, servants, and employees from and against any an all claims or suits for property damage or loss and/or personal injury, including death, to any and all persons, of whatsoever kind or character, whether real or asserted, arising out of in or connection with, directly or indirectly, the work and services to be performed hereunder by Contractor, its officers, agents, employees, contractors, subcontractors, licensees or invitees, whether or not caused, in whole or in part, by alleged negligence on the part of officers, agents, servants, employees, contractors, subcontractors, licensees and invitees of the Owner; and said Contractor does hereby covenant and agree to assume all liability and responsibility of Owner, its officers agents, servants and employees for property damage or loss, and/or personal injuries, including death, to any and all persons of whatsoever kind or character, whether real or asserted, arising out of or in connection with, directly or indirectly, the work and services to be performed hereunder by Contractor, its officers, agents employees, contractors, subcontractors, licensees and invitees, whether or not caused, C6-6 (8) in whole or in part, by alleged negligence of officers, agents, servants, employees, contractors, subcontractors, licensees or invitees of the Owner. Contractor likewise covenants and agrees to, and does hereby, indemnify and hold -. harmless Owner from and against any and all injuries,loss or damages to property of the Owner during the performance of any of the terms and conditions of this Contract, whether arising out of or in connection with or resulting from, in whole or in part, any and all alleged acts or omissions of officers, agents, servants, employees, contractors, subcontractors, licenses, or invitees of the Owner. In the event a written claim for damages against the contractor or its subcontractors remains unsettled at the time all work on the project has been completed to the satisfaction of the Director of the Water Department, as evidenced by a final inspection, final payment to the Contractor shall not be recommended by the Director of the Water Department for a period of 30 days after the date of such final inspection, unless the Contractor shall submit written evidence satisfactory to the Director that the claim has been settled and a release has been obtained from the claimant involved. If the claim concerned remains unsettled as of the expiration ... of the above 30 -day period, the Contractor may be deemed to be entitled to a semi-final payment for work completed, such semi-final payment to be in an amount equal to the total dollar amount then due less the dollar value of any written claims pending against the Contractor arising out of the performance of such work, and such semi-final payment may then be recommended by the Director. rThe Director shall not recommend final payment to a Contractor against whom such a claim for damages is outstanding for a period of six months following the date of the acceptance of e the work performed unless the Contractor submits evidence in writing satisfactory to the Director that: The claim has been settled and a release has been Il. obtained from the claimant involved, or 2. Good faith efforts have been made to settle such I outstanding claims, and such good faith efforts have failed. If condition (1) above is met at any time within the six month period, the Director shall recommend that the final payment to the Contractor be made. If condition (2) above is met at any time within the six month period, the Director may recommend that the final payment to the Contractor be made. At the I C6-6 (9) I expiration of the six month period the Director may recommend that final payment be made if all other work has been performed and all other obligations of the Contractor have been met to the satisfaction of the Director. The Director may, if he deems it appropriate, refuse to accept bids on other Water Department Contract work from a Contractor against whom a claim for damages is outstanding as a result of work performed under a City contract. C6-6.13 CONTRACTOR'S CLAIM FOR DAMAGES: Should the Contractor claim compensation for any alleged damage by reason of the acts or omissions of the Owner, he shall within three days after the actual sustaining of such alleged damage, make a written statement to the Engineer, setting out in detail the nature of the alleged damage, and on or before the 25th day of the month succeeding that in which any such damage is claimed to have been sustained, the Contractor shall file with the Engineer an itemized statement of the details and amount of such alleged damage and, upon request, shall give the Engineer access to all books of account, receipts, vouchers, bills of lading, and other books or papers containing any to the amount of such alleged damage. such evidence as l ements shall be filed as hereinabove required, theContractort s claim for compensation shall be waived, and he shall not be entitled to. payment on account of such damages. C6-6.14 ADJUSTMENT OR RELOCATION OF PUBLIC UTILITIES ETC.: In case it is necessary to change, move, or alter in any manner the property of a public utility or others, the said property shall not be moved or interfered with until orders thereupon have been issued by the Engineer. The right is reserved to the owners of public utilities to enter the geographical limits of the Contract for the purpose of making such changes or repairs to their property that may be necessary by the performance of this contract. C6-6.15 TEMPORARY SEWER AND DRAIN CONNECTIONS: When existing sewer lines have to be taken up or removed, the Contractor shall, at his own expense and cost, provide and maintain temporary outlets and connections for all private or public drains and sewers. The Contractor shall also take care of all sewage and drainage which will be received from these drains and sewers, and for this purpose he shall provide and maintain, at his own cost and expense, adequate pumping facilities and temporary outlets or diversions. The Contractor, at his own cost and expense, shall construct such troughs, pipes, or other structures necessary, and be prepared at all times to dispose of drainage and sewage Ir C6-6 (10) received from these temporary connections until such times as the permanent connections are built and' are in service. The existing sewers and connections shall'be kept in service and maintained under the Contract, except when specified or ordered to be ' abandoned by the Engineer. All water, sewage, and other waste shall be disposed of in a satisfactory manner so that no nuisance is created and so that the work under construction will be adequately protected. C6-6.16 ARRANGEMENT AND CHARGES FOR WATER FURNISHED BY THE CITY: When the Contractor desires to use City water in connection with any construction work, he shall make complete and satisfactory arrangements with the Fort Worth City Water Department for so doing. City water furnished to the Contractor shall.be delivered to the Contractor from a connection on an existing City main. All piping required beyond the point of delivery shall be installed by the Contractor at his own expense. The Contractor's responsibility in the use of all existing fire hydrant and/or valves is detailed in Section E2-1.2 USE OF FIRE HYDRANTS AND VALVES in these General Contract Documents. I r When meters are used to measure the water, the charges, if any, for water will be at the regular established rates. When meters are not used, the charges, if any, will be as prescribed by the City Ordinance, or where no ordinance applies, payment shall be made on estimates and rates t blished by the Director of the Fort Worth Water I I I I 0 I es a Department. C6-6.17 USE OF A SECTION OR PORTION OF THE WORK: Whenever, in the opinion of the Engineer, any section or portion of the work or any structure is in suitable condition, it may be put into use upon the written order of the Engineer, and such usage shall not be held to be in any way an acceptance of said work or structure or any part thereof or as a waiver of any of the provisions of these Contract Documents. All necessary repairs and removals of any section of the work so put into use, due to defective materials or workmanship, equipment, or to deficient operations on the part of the Contractor, shall be performed by the Contractor at his own expense. C6-6.18 CONTRACTOR'S RESPONSIBILITY FOR THE WORK: Until written acceptance by the Owner as provided for in these Contract Documents, the work shall be under the charge and care of the Contractor, and he shall take every necessary precaution to prevent injury or damage to the work or any part C6-6 (11) e 1 thereof by action of the elements whatsoever, whether arising from the a or from any of the work. Y cause The Contractor shall rebuild, l repair, execution and make good at his own expense all injuries or amarestore, portion of the work occasioned by any of the r to any causes. hereinabove C6-6.19 NO WAIVER OF LEGAL RIGHTS: Inspection b or any order by the Owner by by the Engineer for or acceptance of any work, kYmortan f money or . an any possession taken by the City shall not operate a any payment y extension of time, or of any provision of the Contract Documents, s a waiver breach or Contract shall not be held to be a waiverro f any other or subsequent breach. f any The Owner reserves the right to correct any error that may be discovered in any estimate that may adjust the same to meet the requirementseof the Documents. Paid and to Contract C6-6.20 PERSONAL LIABILITY OF PUBLIC OFFICIALS: In carr out the provisions of these exercising an Contract Documents orylng in shall be no liabilityeither Upon the authorized representatives eof re I personally or otherwise as they are agents and representatives of the City. C6-6.21 STATE SALES t Fort Worth TAX' On a contract awarded b an organization which by the City of pursuant the provisions of Article u20.04eS for exemption Limited Sales, excise, and Use Tax Act, the HContract Texas purchase, rent or lease all materials, Supplies used or consumed in the performance of this contractr may and equipment issuing to his supplier an exemption certificate in by the tax, said exemption certificate to lieu of Comptroller's Ruling .007. Any such exemption cwith ertificate issued by the Contractor in lieu of the tax shall be to and shall comply with the provisions of State Com tro ate Ruling subject .011, and any other applicable State P ller's rulings pertaining to the Texas Limited Sales, Excise, and Use Tax Act. , and Use On a contract awar publicl ded by a developer for the construction of a Y -owned improvement in a street right-of-way or other easement which has been dedicated to the of Fort Worth, an organization which public and the City pursuant to the provisions of Article O104es for exemption limited Sales, Excise, and Use Tax Act, the (Contractor cH) of the an Probably be exempted in the same manner stated above. can n C6-6 (12) 1 I Limited. Sale, Excise and Use Tax permits and information can I be obtained from: Comptroller of Public Accounts I Sale Tax Division Capitol Station Austin, TX I I I I' I I I I I I I I C6-6 (13) I I I I I I I I Li I I I I I I PART C - GENERAL CONDITIONS C7-7 PROSECUTION AND PROGRESS SECTION C7-7 PROSECUTION AND PROGRESS: C7-7.1 SUBLETTING: The Contractor shall perform with his own organization, and with the assistance of workman under his immediate superintendance, work of a value of not less than fifty (50%) percent of the value embraced in the contract. If the Contractor sublets any part of the work to be done under these Contract Documents, he will not under any circumstances be relieved of the responsibility and obligation assumed under these Contract Documents. All transactions of the Engineer will be with the Contractor. Subcontractors will be considered only in the capacity of employees or workmen of the Contractor and shall be subject to the same requirements as to character and competency. The Owner will not recognize any subcontractor on the work. The Contractor shall at all times, when the work is in operation, be represented either in person or by a superintendent or other designated representatives. C7-7.2 ASSIGNMENT OF CONTRACT: The Contractor shall not assign, transfer, sublet, convey, or otherwise dispose of the contract or his rights, title, or interest in or to the same or any part thereof without the previous consent of the Owner expressed by resolution of the City Council and concurred in by the Sureties. If the Contractor does, without such previous consent, assign, transfer, sublet, convey, or otherwise dispose of the contract or his right, title, or interest therein or any part thereof, to any person or persons, partnership, company, firm, or. corporation, or does by bankruptcy, voluntary or involuntary, or by assignment under the insolvency laws of any state, attempt to dispose of the contract may, at the option of the Owner be revoked and annulled, unless the Sureties shall successfully complete said contract, and in the event of any such revocation or annulment, any monies due or to become due under or by virtue of said contract shall be retained by the Owner as liquidated damages for the reason that it would be impracticable and extremely difficult to fix the actual damages. 1 C7-7.3 PROSECUTION OF THE WORK: Prior to beginning any construction operation, the Contractor shall submit to the Engineer in five or more copies, if requested by the Engineer, I a progress schedule preferably in chart or diagram form, or a brief outlining in detail and step by step the manner of C7-7 (1) 1 prosecuting the work and ordering materials and equipment 1 which he expects to follow in order to complete the project in the scheduled time. There shall also be submitted a table of estimated amounts to be earned by the Contractor during each monthly estimate period. The Contractor shall commence the work to be performed under this contract within the time limit stated in these Contract Documents and shall conduct the work in a continuous manner and with sufficient equipment, materials, and labor as is necessary to insure its completion within the time limit. I The sequence requested of all construction operations shall be at all times as specified in the Special Contract Documents. Any deviation from scuh sequencing shall be submitted to the Engineer for his approval. Contractor shall not proceed with any deviation until he has received written approval from the Engineer. Such specification or approval by the Engineer shall not relieve the Contractor from the full responsibility of the complete performance of the Contract. The contract time may be changed only as set forth in Section C7-7.8 "Extension of Time of Completion" of this Agreement, and a progress schedule shall not constitute a change in the contract time. C7-7.4 LIMITATIONS OF OPERATIONS: The working operations shall at all times be conducted by the Contractor so as to create a minimum amount of inconvenience to the public. At any time when, in the judgment of the Engineer, the Contractor has obstructed or closed or is carrying on operations in a portion of a street or public way greater than is necessary for the proper execution of the work, the Engineer may require the Contractor to finish the section on which operations are in progress before the work is commenced on any additional section or street. C7-7.5 CHARACTER OF WORKMEN AND EQUIPMENT: Local labor shall be used by the Contractor is available. The Contractor may bring in from outside the City of Fort Worth his key men and his superintendent. All other workmen, including equipment operators, may be imported only after the local supply is exhausted. The Contractor shall employ only such superintendents, foremen, and workmen who are careful, competent, and fully qualified to perform the duties or tasks assigned to them, and the Engineer may demand and secure the summary dismissal of any person or persons employed by the Contractor in or about or on the work who, in the opinion of the Owner, shall misconduct himself or be found to be incompetent, disrespectful, intemperate, dishonest, or 1 C7-7 (2) I otherwise objectionable or neglectful in the proper performance of his or their duties, or who neglects or refuses to comply with or carry out the directions of the Owner, and such person or persons shall not be employed again thereon without written consent of the Engineer. 4 All workmen shall have sufficient skill, ability, and experience to properly perform the work assigned to them and operate any equipment necessary to properly carry out the performance of the assigned duties. I The Contractor shall furnish and maintain on the work all such equipment as is considered to be necessary for prosecution of the work in an acceptable manner and at a satisfactory rate of progress. All equipment, tools, and machinery used for I handling materials and executing any part of the work shall be subject to the approval of the Engineer and shall be I maintained in a satisfactory, safe and efficient working condition. Equipment on any portion of the work shall be such that no injury to the work, workmen or adjacent property will result from its use. C7-7.6 WORK SCHEDULE: Elapsed working days shall be computed starting with the first day of work completed as defined in Cl-1.23 "WORKING DAY" or the date stipulated in the "WORK ORDER" for beginning work, whichever comes first. Nothing in these Contract Documents shall be construed as I prohibiting the Contractor from working on Saturday, Sunday or Legal Holidays, providing that the following requirements are met: a. A request to work on a specific Saturday, Sunday or Legal Holiday must be made to the Engineer no later than the proceeding Thursday. b. Any work to be done on the project on such a specific Saturday, Sunday or Legal Holiday must be, I in the opinion of the Engineer, essential to the timely completion of the project. The Engineer's decision shall be final in response to such a I request for approval to work on a specific Saturday, Sunday or Legal Holiday, and no extra compensation shall be allowed to the Contractor for any work performed on such a specific Saturday, Sunday or Legal Holiday. Calendar Days shall be defined in Cl-1.24 and the Contractor may work as he so desires. I C7-7 (3) C7-7.7 TIME OF COMMENCEMENT AND COMPLETION: TheContractorshall commence the working operations within the time specified in the Contract Documents and set forth in the Work Order. Failure to do so shall be considered by the Owner as abandonment of the Contract by the Contractor and the Owner may proceed as he sees fit. The Contractor shall maintain a rate of progress such as will insure that the whole work will be performed and the premises cleaned up in accordance with the Contract Documents and within the time established in such documents and such extension of time as may be properly authorized by the Owner. C7-7.8 EXTENSION OF TIME COMPLETION: The Contractor's request for an extension of time of completion shall be considered only when the request for such extension is submitted in writing to the Engineer within seven days from and after the time alleged cause of delay shall have occurred. Should an extension of the time of completion be requested such request will be forwarded to the City Council for approval . In adjusting the contract time for completion of work, consideration will be given to unforseeable causes beyond the control of and without the fault or negligence of the Contractor, including but limited to acts of the public enemy, acts of the Owner, fire, flood, tornadoes, epidemics, quarantine restrictions, strikes, freight embargoes, or delays of sub -contractors due to such causes. When the date of completion is based on a calendar day bid, a request for extension of time because of inclement weather will not be considered. A request for extension of time due to inability to obtain supplies and materials will be considered only when a review of the Contractor's purchase order dates and other pertinent data as requested by the Engineer indicates that the Contractor has made a bonafide attempt to secure delivery on schedule. This shall include efforts to obtain the supplies and materials from alternate sources in case the first source cannot make delivery. If satisfactory execution and completion of the contract should require work and materials in greater amounts or quantities than those set forth in the approved Contract Documents, then the contract time may be increased by Change Order. C7-7.9 DELAYS: The Contractor shall receive no compensation for delays or hindrances to the work, except when direct and unavoidable extra cost to the Contractor is caused by the failure of the City to provide information or material, if C7-7 (4) t C 1 1 1 1 1 1 1 VI 1 1 1 1 1 1 any, which is to be furnished by the City. When such extra compensation is claimed a written statement thereof shall be presented by the Contractor to the Engineer and if by him found correct shall be approved and referred by him to the Council for final approval or disapproval; and the action thereon by the Council shall be final and binding. If delay is caused by specific orders given by the Engineers to stop work, or by the performance of extra work, or by the failure of the City to provide material or necessary instructions for carrying on the work, then such delay will entitle the Contractor to an equivalent extension of time, his application for which shall, however, be subject to the approval of the City Council; and no such extension of time shall release the Contractor or the surety on his performance bond from all his obligations hereunder which shall remain in full force until the discharge of the contract. C7-7.10 TIME OF COMPLETION: The time of completion is an essential element of the contract. Each bidder shall indicate in the appropriate place on the last page of the Proposal the number of working days or calendar days that he will require Ito fully complete this contract or the time of completion will be specified by the City in the Proposal section of the contract documents. I The number of days indicated shall be a realistic estimate of the time required to complete the work covered by the specific contract being bid upon. The amount of time so stated by the I successful bidder or the City will become the time of completion specified in the Contract Documents. For each calendar day that any work shall remain uncompleted after the time specified in the Contract Documents, or the increased time granted by the Owner, or as automatically increased by additional work or materials ordered after the I contract is signed, the sum per day given in the following schedule, unless otherwise specified in other parts of the Contract Documents, will be deducted from monies due the I Contractor, not as a penalty, but as liquidated damages suffered by the Owner. IAMOUNT OF CONTRACT Less than $ 5,000 inclusive $ 35.00 $ 5,001 to $ 15,000 inclusive $ 45.00 $ 15,001 to $ 25,000 inclusive $ 63.00 $ 25,001 to $ 50,000 inclusive $ 105.00 $ 50,001 to $ 100,000 inclusive $ 154.00 $ 100,001 to $ 500,000 -inclusive $ 210.00 I C7-7 (5) f $ 500,001 to $1,000,001 to $2,000,001 and over $1,000,000 $2,000,000 inclusive $ inclusive $ $ The parties hereto understand 315.00 420.00 630.O0 ity agree that any harm to the caused by the Contractor's delay in completing would be or vet y the Contract Documents the work hereunder in the time specified bDocuments ad that incapable y. difficult of accurate estimation, "Amount of Liquidated Damages compensationby due C7-7.11 SUSPENSION BY COURT ORDER: The Cont suspend operations on such part ors Contractor oshall rdered by any court, and will not bepentitledof htowadd °tiered compensation by virtue of such court order. be liable to the City in the event the work is Suspended a Neither will he Court Order. Neither will the Owner be liable ended by e Contractor by virtue of any to the the Owner is not solely responsible. Order or action for which C7-7.12 TEMPORARY SUSPENSION: The Owner shall have the to suspend the work operation wholly or or in right period to aor periods rofConditionstime eomay deem necessaryor such conditions which in the opinion of the Owner or Engine due cause r any other unfavorable .further prosecution of the work to be unsatisfactory detrimental to the interest of the project. During suspension of work covered by this contract oty or the Owner will make no extra temporary construction equipment and/or construction for any reason, payment for stand-by time of crews. If it should become necessary indefinite period, the Contractor shall store all mat k for in such manner that they will not obstruct or impede the public unnecessarily nor become damaged in any way, and materials in every precaution to he shaltake work performed; he shalleprovidemsuitableage or edrainageln aboutof the work, and erect temporary structures where necessary. the Should the Contractor not be able to complete a portion project due to causes beyond the control of of the fault or negligence of the Contractor asset f out the n Paragraph C7-7.8 EXTENSION OF THE TIME forth in should it be determined by mutual consent of the Cont and the Engineer that a solution to allow constructionand proceed is not available within a reasonable Contractor then the Contractor may be reimbursed for the cost of moving to his equip period of time, equipment to the off the job and returning the necessar job when it is determined by the Engineer C7-7 (6) that construction may be resumed. Such reimbursement shall be based on actual cost to the Contractor of moving the equipment and no profit will be allowed. -o No reimbursement shall be allowed if the equipment is moved to another construction project for the City of Fort Worth. The Contractor shall not suspend work without written notice from the •Engineer and shall proceed with the work operations promptly when notified by the Engineer to so resume operations. C7-7.13 TERMINATION OF CONTRACT DUE TO NATIONAL EMERGENCY: Whenever, because of National Emergency, so declared by the President of the United States or other lawful authority, it becomes impossible for the Contractor to obtain all of the necessary labor, materials, and equipment for the prosecution of the work with reasonable continuity for a period of two months, the Contractor shall within seven days notify the City in writing, giving a detailed statement of the efforts which have been made and listing all necessary items of labor, materials, and equipment not obtainable. If, after I investigations, the Owner finds that such conditions existing and that the inability of the Contractor to proceed is not 'attributable in whole or in part to the fault or neglect of the Contract, then if the Owner cannot after reasonable effort assist the Contractor in procuring and making available the necessary labor, materials and equipment within thir-ty days, the Contractor may request the Owner to terminate the contract and the Owner may comply with the request, and the termination shall be conditioned and based upon a final settlement mutually acceptable to both the Owner and the Contractor and final payment shall be made in accordance with the terms of the agreed settlement, which shall include, but not be limited to, the payment for all work executed but no anticipated profits on work which has not been performed. C7-7.14 SUSPENSION OR ABANDONMENT OF THE WORK AND ANNULMENT OF I CONTRACT: The work operations on all or any portion or section of the work under Contract shall be suspended immediately on written order of the Engineer or the Contract may be declared cancelled by the City Council for any good and sufficient cause. The following, by way of example, but not of limitation, may be considered grounds for suspension or cancellation: a. Failure of the Contractor to commence work operations within the time specified in the Work Order issued by the Owner. fa C7-7 (7) n b. Substantial evidence that progress of the P work operations by Contractor is insufficient to complete the work within the specified time. c. Failure of the Contractor to provide and maintain sufficient labor and equipment to properly execute the working operations. d. Substantial evidence that the Contract abandoned the Contractor has work. e. Substantial evidence that the Contractor has become insolvent or bankrupt, or otherwise financially unable to carry on the work satisfactorily. I f. Failure on the part of the Con observe Contractor any requirements of the Contract Documents or to comply with any orders given by the Engineer Owner or provided for in these Contract Documents. g. Failure of the Contractor promptly to make good any defect in materials or workmanship, or any defects of any nature the correction of which has been directed in writing by the Engineer or the Owner. h. Substantial evidence of collusion for of illegallgy the purpose contract pCity I fraud on the or work in the construction of under contract. i. A substantial indication that the Contractor has made an unauthorized assignment of the contract or any funds due therefrom for the benefit of any creditor or for any other purpose. j. If the Contractor shall for any cause whatsoever not carry on the working operation manner. in an acceptable k. If the Contractor commences legal action against the Owner. A I copy of shall be served the suspension order or action of t Council he on the suspended Contractor's Sureties. When work is for any cause or causes, or when the cancelled, contract is the Contractor shall discontinue the work or such part thereof as the Owner shall designate, whereupon the Sureties may, at their option, assume the contract or that portion thereof which the Owner has discontinue, ordered the Contractor to and may perform the same or may, with the written C7-7 (8) I consent of the Owner, sublet the work or that portion of the work as taken over, provided however, that the Sureties shall exercise their option, if at all, within two weeks after the written notice to discontinue the work has been served upon the Contractor and upon the Sureties or their authorized agents. The Sureties, in such event shall assume the Contractor's place in all respects, and shall be paid by the Owner for all work performed by them in accordance with the I terms of the Contract Documents. All monies remaining due the Contractor at the time of this default shall thereupon become due and payable to the Sureties as the work progresses, I subject to all of the terms of the Contract Documents. In case the Sureties do not-, within the hereinabove specified time, exercise their right and option to assume the contract I responsibilities, or that portion thereof which the Owner has ordered by the Contractor to discontinue, then the Owner shall have the power to complete, by contract or otherwise, as it I may determine, the work herein described or such part thereof as it may deem necessary, and the Contractor hereto agrees that the Owner shall have the right to take possession of and I use any materials, plants, tools, equipment, supplies, and property of any kind provided by the Contractor for the purpose of carrying on the work and to procure other tools, equipment, materials, labor and property for the completion of the work, and to charge to the account of the Contractor of said contract expense for labor, materials, tools, equipment, and all expenses incidental thereto. The expense so charged shall be deducted by the Owner from such monies as may be due or may become due at any time thereafter to the Contractor under and by virtue of the Contract or any part thereof. The Owner shall not be work completing the required to obtain the lowest contract, but the expense to bid for the be deducted shall be the actual cost of the owner of such work. I In case such expenses shall exceed the amount which would have been payable under the Contract if the same had been completed by the Contractor, then the Contractor and his Sureties shall I pay the amount of such excess to the City on notice from the Owner of the excess due. When any particular part of the work is being carried on by the Owner by contract or otherwise t under the provisions of this section, the Contractor shall continue the remainder of the work in conformity with the terms of the Contract Documents and in such a manner as to not hinder or interfere with performance of the work by the Owner. C7-7.15 FULFILLMENT OF CONTRACT r The Contract will be considered as having been fulfilled, save as provided in any bond or bonds or by law, when all ttie work and all sections or parts of the project covered by the Contract Documents have IC7-7 (9) been finished and completed, the final inspection made b Engineer, and the final acceptance and final by the the Owner. payment made by C7-7.16 TERMINATION FOR CONVENIENCE OF THE OWNER. A. NOTICE OF TERMINATION: under this contract may behterminatedcb of the work in whole, or from time to Y.the. Owner accordance with this section, whenever time in part, in shall determine that such termination is heinOwthe best interest of the Owner. Any such termination shall be effected by mailin termination to the Contractor s l a notice o extent ecif to Which performance of work underythe contract inthe is terminated, , and the date termination becomes effective. which such notice shall be deemed conclusivel cei t of the established when the letter is ply presumed and States Mail by the Owner. placed in the United deemed conclusively Further, it shall be presumed and established that such termination is made with stated; and no proof in any just cause as therein shall be required of the Ownerregardindeman�gor uch discretionary action. larding such B. CONTRACTOR ACTION: After receipt of a notice of termination, and except as otherwise directed by the Engineer, the Contractor shall: 1. Stop work under the contract on the date and to the extent specified in the notice of termination; 2. place no further orders or subcontracts for materials, services or facilities except as may be necessary for completion of such portion of the work under the contract as is not terminated; 3. 4. terminate all orders and subcontracts to the extent that they relate to the performance of work terminated by the notice of termination; transfer title to the manner, at the if any, directed by the Owner and times, and to the Engineer: r I C I El I I I C I deliver in the extent, I C7-7 (10) I 1 a. the fabricated or unfabricated parts, work in process, completed work, supplies and other material produced as a part of, or acquired in connection with the performance of, the work terminated by the notice of termination; and the completed, or partially completed Ib. plans, drawings, information and other property which, if the contract had been completed, would have been required to be furnished to the Owner. complete performance of such part of the work Is. as shall not have been terminated by the notice of termination; and 6. take such action as may be necessary, or as the Engineer may direct, for the protection and preservation of the property related to its contract which is in the possession of the Contractor and in which the Owner has or may acquire the rest. At a time not later than 30 days after the termination date specified in the notice of termination, the Contractor may submit to the Engineer a list, certified as to quantity and I guality, of any or all items of termination inventory not previously disposed of, exclusive of items the disposition of which has been directed or t authorized by the Engineer. Not later than 15 days thereafter, the Owner shall accept title to such items provided, that the list submitted shall be I subject to verification by the Engineer upon removal of the items or, if the items are stored, within 45 days from the date of submission of the list, and any necessary adjustments to correct the I list as submitted, shall be made prior to final settlement. C. TERMINATION CLAIM: Within 60 days after notice of termination, the Contractor shall submit his termination claim to the Engineer in the form and with the certification prescribed by the Engineer. Unless one or more extensions in writing are granted by the Owner upon request of the I Contractor, made in writing within such 60 -day period or authorized extension thereof, any and all such claims shall be conclusively deemed waived. 1 1 C7-7 (11) D. AMOUNTS:Subject ..to the C7-7.16(C), the Contractor sions of lmay and Owner upon the whole or any part of the g Upon agree be paid to the amounf or Contractor by h amounts to partial termination orks°n of the total of or provided, that such agreed amount Pursuant hereto; never exceed the total contractor amounts shall the amount of ymenprice as reduced by further reduced pb ts otherwise made and the as terminated. y .contract price of work not Tbe'contract shall be amended accordingly, and the Contractor shall agreed amount. be No amount shall be due for paid tar anticipated profits. Nothing hereafter, prescribing the C7-7.16 (E) amountto be Contractor in the eventpaid to the Contractor by reason the of the terminatof ion ofure f work pursuant to this section, shall be deemed to limit, restrict or otherwise determine amount or amounts which may be agreed or affect the paid to the Contractor to be pursuant to thisUpon Paragraph. E. FAILURE TO AGREE: In the the Contractor and the Ownervtot of the failure of in C7-7.16 (D) upon the whole amount asto the Contractor by paid paid to reason of the termination pursuant to this section the r Owner shall determine, on the basis of information amount, if if any,available to it, the a and to the Contractor by reason of amounts determined, pay to the Contractor the lost or anticipated profitsamount shall be due for F. DEDUCTIONS: In arriving at the amount due the contractor under this section deducted (a) there shall be all unliquidated, payments on account theretoforevance or other r Contractor, applicable to to the the terminated portion this contract; (b) any claim which the have against omaf Owner the Contractor ins y contract; and (c) the connection with this agreed rice proceeds of sale of, any materials for, or the other things kept by the Contractor or pursuant to the provisions sold, , of this clause, and otherwise recovered by or credited to not the Owner. G. ADJUSTMENT: If the termination hereunder be partial, prior to the settlement of the terminated portion of this contract, with the Engineer the Contractor may file a quest in writing for an C7-7 (12) C equitable adjustment of the price or prices specified in the contract relating to the continued portion of the contract (the portion not terminated by the notice of termination), such equitable adjustment as may be agreed upon shall be made in such price or prices; nothing contained herein, however, shall limit the right of the Owner and the Contractor to agree upon the amount or amounts to be paid to the Contractor for the completion of the continued portion of the contract when said contract does not contain an established contract price for such continued portion. H. NO LIMITATION OF RIGHTS: Nothing contained in this section shall limit or alter the rights which the Owner may have for termination of this contract under c7-7.14 hereof entitled "Suspension of Abandonment of the work and Amendment of Contract" or any other right which Owner may have for default or breach of contract by Contractor. C7-7.17 SAFETY METHODS AND PRACTICES: The Contractor shall be responsible for initiating, maintaining, and supervising all safety precautions and programs in connection with the work at all times and shall assume all responsibilities for their enforcement. ^ The Contractor shall comply with federal, state, and local laws, ordinances, and regulations so as to protect person and property from injury, including death, or damage in connection with the work. C7-7 (13) PART C - GENERAL CONDITIONS C8-8 MEASUREMENT AND PAYMENT SECTION C8-8 MEASUREMENT AND PAYMENT C8-8.1 MEASUREMENT OF QUANTITIES: The determination of quantities of work performed by the Contractor and authorized by the Contract Documents acceptably completed under the terms of the Contract Documents shall be made by the Engineer, based on measurements made by the Engineer. These measurements will be made according to the United States Standard Measurements used in common practice, and will be the actual length, area, solid contents, numbers, and weights of the materials and items installed. C8-8.2 UNIT PRICES: When in the Proposal a "Unit Price" is set forth, the said "Unit Price" shall include the furnishing by the Contractor of all labor, tools, materials, machinery, equipment, appliances and appurtenances necessary for the I construction of and the completion in a manner acceptable to the Engineer of all work to be done under these Contract Documents. I The "Unit Price" shall include all permanent and temporary protection of overhead, surface, and underground structures, cleanup, finished, overhead expense, bond, insurance, patent I fees, royalties, risk due to the elements and other causes, delays, profits, injuries, damages claims, taxes, and all other items not specifically mentioned that may be required to fully construct each item of the work complete in place and in Ia satisfactory condition for operation. C8-8.3 LUMP SUM: When in the Proposal a "Lump Sum" is set forth, the said "Lump Sum" shall represent the total cost for the Contractor to furnish all labor, tools, materials, machinery, equipment, appurtenances, and all subsidary work necessary for the construction and completion of all the work to provide a complete and functional item as detailed in the Special Contract Documents and/or Plans. C8-8.4 SCOPE OF PAYMENT: The Contractor shall receive and accept the compensation, as herein provided, in full payment for furnishing all labor, tools, materials, and incidentals t for performing all work contemplated and embraced under these Contract Documents, for all loss and damage arising out of the nature of the work or from the action of the elements, for any J unforeseen defects or obstructions which may arise or be encountered during the prosecution of_the work at any time C8-8 (1) Ni I before its final acceptance by the Owner, (except as in paragraph C5-5.14) for all risks of whatever des provided connected with the prosecution of the work, criptnse incurred by or in consequence of suspension or discont nua expense ce of such prosecution of the workin g g. operations inerein trademarks or any and all- infringements of as herein copyrights, or other legal reservations atents, completeing the work in an acceptable manner terms of the Contract Documents• and for • _ according�to the The payment of any current or partial estimate prior to final acceptance of the work by an acknowledgment of the acceptance s oflthel nwork,m or equipment, nor in any way no way constitute prejudice or affect the obligations of the Contractor to repair, correct, renew, own and proper expense any defects or imperfectionsainthis the construction or in the strength or used or equipment or machinery furnished in or construction of the work under contractquality of the material and its a about the or any damage due or attributed to such defectsendefects, imperfection, or damage shall have been discoveredwhich or before the final inspection and acceptance of kon or during the one year guarant The Owner shall be the sy operiod leud after final acceptances imperfections, or damage, and the Contractor shalle of Suchdliable be e t s , to the Owner for failure ame as to correct the same provided C8-8.5 PARTIAL ESTIMATES AND RETAINAGE: Between, 5th day of each month the Contractor shall submit to and Engineer a statement showing an estimate of the value the work done during the previous month, or estimate the Contract Documents. Not later than the 10th of the month the Engineer shall verify such estimate,period under found to be acceptable and the value of work day of the the last and if it is rmed e (he00.t partial ppayment was made exceeds one hundred dollars the Contractor if the 90% totals contract t uch estimated Sumwill be $400,000, is less a than Contractor or f the total ucontract amount ch estimated sum $4will be within twenty-five (25) days after the regular estimate to the The City will have the option of Preparing greater furnished b esperiod. y the City. The P t al g estimate imatetes on forms acceptable nonperishable materialsadel delivered tothework which are to be incorporated into the work as a may include thereofr but which at the the time of the estimatenhavepnot been installed. (such payment will be allowed on a bas of 85% of the net invoice value thereof.) The Contractor furnish the Engineer such information as he may request pato aid id d C8-8 (2) I I E 7 U C C J f'1 I P1 LII 7 him as a guide in the verification or the preparation of partial estimates. It is understood that the partial estimate from month to month will be approximate only, and all partial monthly estimates and payment will be subject to correction in the estimate rendered following the discovery of an error in any previous estimate,and such estimate shall not, in any respect, be taken as an admission of the Owner of the amount of work done or of its quality of sufficiency, or as an acceptance of the work done or the release of the Contractor of any of his responsibilities under the Contract Documents. The City reserves the right to withhold the paymeht of any monthly estimate if the contractor fails to perform the work strictly in accordance with the specifications or provisions of this contract. C8-8.6 WITHHOLDING PAYM�NT: Payment on any estimate or estimates may be held in abeyance if the performance of the construction operations is not in accordance with the requirements of the Contract Documents. C8-8.7 FINAL ACCEPTANCE: Whenever the improvements provided for by the Contract Documents shall have been completed and all requirements of the Contract Documents shall have been fulfilled on the part of the Contractor, the Contractor shall notify the Engineer in writing that the improvements are ready for the final inspection. The Engineer shall notify the appropriate officials of the Owner, will within a reasonable time make such final inspection, and if the work is satisfactory, in an acceptable condition, and has been completed in accordance with the terms of the Contract Documents and all approved modifications thereof, the Engineer will initiate the processing of the final estimate and recommend final acceptance of the project and final payment therefor as outlined in C8-8.8 below. C8-8.8 FINAL PAYMENT: Whenever all the improvements provided for by the Contract Documents and all approved modifications thereof shall have been completed and all requirements of the Contract Documents have been fulfilled on the part of the Contractor, a final estimate showing the value of the work will be prepared by the Engineer as soon as the necessary measurements, computations, and checks can be made. All prior estimates upon which payment has been made are subject to necessary corrections or revisions in the final payment. 7 C8-8 (3) The amount of the final estimate, any sum that have been deducted or sretavined. under provisions of the Contract Documents, will be Payments and Contractor within 60 days after final acceptance by t h e paid to the on a proper resolution of the City the Owner Contractor has furnished to the Owner satisfactory provided the o payment as follows: y evidence of for payment, the Contractor oshall submisexecute ansi0 of affidavit final estimate furnished by the City, certifying affidavit, as associations, corporations, or other that all persons, firms, labor and/or materials have been ganizatl,thatthe furnishing scale established by the City paid in full, the wage Worth has been paid, and that herecare il lno claims n the City of Fort personal injury and/or property damages. Pending for The acceptance by the Contractor of the last or final payment as aforesaid shall operate as and shall release the Owner from all claims or liabilities under the Contract for anything d or furnished or relating to the work under Contract Documents or any act or neglect of said City relating to tee with the Contract.is or connected The making of the final The Contractor an payment by the Owner shall not relieve tire Contract Documents which aSpecifically rante or tcont conher tinue eaf s of the O8-8.9 ADEQUACY OF DESIGN: ter. believes it has employed competent Engineers° d thdat the Owner prepare the Contract Documents and all modifications ofthe approved Contract Documents. It is, therefore the Owner shall be responsible for the adequacyareed that design features, sufficiency of the ContracDocuments of its own e safety of the structure, and the ocuments, the operations of the completed project, Practied cability dability r the has complied with the requirementsrof thesaidDocuments, all approved he Contractor modifications thereof, Contract ds and alterations thereto approved in writing by hed additions burden of proof of such compliance shall be The Contractor to show that he has complied with the n the said requirements of the Contract Documents , aroveificatons thereof, and all approved additions and alterationsdther to. C8 8.10 GENERAL GUA payment nor any RANTY: Neither the final certificate of provision in the partial or entire occupancy oruse oftthet Documents nor Owner shall constitute an acceptpremises by the accordance with the Contract Documents w°or relieve the ot does he Contractor of liability in respect to any express warranties or responsibility for faulty materials or workmanship. The Contractor shall remedy any defects or damages in the work and _ . C8-8 (4) C C CI' I I C I IJ� pay for any damage to other work resulting therefrom which shall appear within a period of one year from the date of final acceptance of the work unless a longer period is specified andshall furnish a good and sufficient maintenance bond in the amount of 100 percent of the amount of the contract which shall assure the performance of the general guaranty as above outline. The Owner will give notice of observed defects with reasonable promptness. C8-8.11 SUBSIDIARY WORK: Any and all work specifically governed by documentary requirements for the project, such as conditions imposed by the Plans, the General Contract Documents or these Special Contract Documents, in which no specific item for bid has beenprovided for in the Proposal, shall be considered as a subsidiary item of work, the cost of which shall be included in the price bid in the Proposal, for each bid item. Surface restoration, rock excavation and cleanup are general items of work which fall in the category of subsidiary work. C8-8.12 MISCELLANEOUS PLACEMENT OF MATERIAL: Material may be allocated under various bid items in the Proposal to establish unit prices for miscellaneous placement of material. These materials shall be used only when directed by the Engineer, depending on field conditions. Payment for miscellaneous placement of material will be made for only that amount of material used, measured to the nearest one -tenth unit. Payment for miscellaneous placement of material shall be in accordance with the General Contract Documents regardless of the actual amount used for the project. I C8-8.13 RECORD DOCUMENTS: Contractor shall keep on record a copy of all specifications, plans, addenda, modifications, shop drawings and samples at the site, in good order and annotated to show all changes made during the construction process. These shall be delivered to Engineer upon completion of the work. I I I I I C8-8 (5) I 1 I I I I I I I I C I I I I I I SECTION Cl SUPPLEMENTARY CONDITIONS TO SECTION C B Li B. Paragraph C3-3.2 should be deleted in its entirety and replaced with the following: Upon request, Contractor agrees to provide to Owner complete and accurate information regarding actual work performed by a Minority Business Enterprise (MBE) and/or a Woman Business Enterprise (WBE) on the contract and payment therefore. Contractor further agrees to permit an audit and/or examina- tion of any books, records or files in its possession that will substantiate the actual work performed by an MBE and/or IWBE. The misrepresentation of facts (other than a negligent misrepresentation) and/or the commission of fraud by the Contractor will be grounds for termination of the contract and/or initiating action under appropriate federal, state or local laws or under appropriate federal, state or local laws I. or ordinances relating to false statements; further, any such misrepresentation (other than a negligent misrepresentation) • and/or commission of fraud will result in the Contractor being determined to be irresponsible and barred from participating • in City work for a period of time of not less than three (3) years. I' C. Part C - General Conditions: C3-3.7 Bonds, the paragraph after subparagraph d. Change the paragraph to read as follows: 61 "No sureties will be accepted by the Owner which are at the time in default or delinquent on any bonds or which are interested in any litigation against the Owner. All bonds shall be made on the forms furnished by the Owner and the surety shall be acceptable to the Owner. In order Ifor a surety to be acceptable to the City, (1) the name of the surety shall be included on the current U.S. I Treasury List of Acceptable Sureties {Circular 870}, or (2) the .surety must have capital and surplus equal to ten -1- 1` SECTION Cl: SUPPLEMENTARY CONDITIONS TO SECTION C A. General These Supplementary Conditions amend or supplement the General Conditions of the Contract and other provisions of the Contract Documents as indicated below. Provisions which are not so amended or supplemented remain in full force and affect. times the amount of the bond. The surety must be licensed to business in the state of Texas. The amount of the bond shall not exceed the amount shown on the Treasury list or one -tenth (1/10) of the total capital and surplus. If Ereinsurance is required, the company writing the reinsur- ance must be authorized, accredited or trusteed to do business in Texas." D. Section C8-8.5 should be deleted in its entirety and replaced I with the following: Partial pay estimates shall be submitted by the contrac- t for or prepared by the City on the 5th day and 20th day of each month that the work is in progress. The estimate shall be proceeded by the City on the 10th day and 25th day respectively. Estimates will be paid within 25 days following the end of the estimate period, less the appropriate retainage as set out below. Partial pay I estimates may include acceptable nonperishable materials delivered to the work place which are to be incorporated into the work as a permanent part thereof, but which at the time of the pay estimate have not been so installed. If such materials are included within a pay estimate, payment shall be based upon 85% of the net voice value I thereof. The Contractor will furnish the Engineer such information as may be reasonably requested to aid in the verification or the preparation of the pay estimate. For contracts or less than $400,000 at the time of I execution, retainage shall be ten per cent (10%). For contracts of $400,000 or more at the time of execution, retainage shall be five percent (5%). IContractor shall pay subcontractors in accord with the subcontract agreement within five (5) business days after I receipt by Contractor of the payment by City. Contrac- tor's failure to make the required payments to subcon- tractors will authorize the City to withhold future I payments from the Contractor until compliance with this paragraph is accomplished. IIt is understood that the partial pay estimates will be approximate only, and all partial pay estimates and payment of same will be subject to correction in the estimate rendered following the discovery of the mistake I -2- 1. in any previous estimate. Payment of any partial pay I Owner of the amount of work done or of its quality or sufficiency or as an acceptance of the work done; • nor shall same release the contractor of any of its responsi- bilities ' under the Contract Documents. The City reserves the right to withhold the payment Ij of any partial estimate if the contractor fails to perform the work in strict accordance with the specifications or other provisions of this con- • tract. E. Part C - General Conditions: Paragraph C3-3.11: .Delete subparagraph a. F. Part C - general Conditions: Paragraph C3-3.11: Delete subparagraph g. 1 i; ..• . • 1 •. 1 • 1 0 0 0 0 0 0 0 0 0 0 LI 0 0 0 0 0 0 0 PART D - SPECIAL CONDITIONS D-1 AWARD OF CONTRACT....................................................................................... SC -4 D-2 SUBMISSION OF CONTRACT DOCUMENTS...................................................... SC -4 D-3 GENERAL.................................i........................................................................ .. SC -5 D-4 TAX EXEMPTIONS................................................................................................ SC -7 D-5 PROJECT DESIGNATION..................................................................................... SC -7 D-6 EQUAL EMPLOYMENT PROVISIONS.................................................................. SC -7 D-7 PRE -CONSTRUCTION CONFERENCE................................................................ SC -7 D-8 COORDINATION MEETINGS................................................................................ SC -7 D-9 PROJECT ABANDONMENT.................................................................................. SC -7 D-10 BREAKDOWN OF BID PROPOSAL...................................................................... SC -7 D-1 I INDEMNIFICATION............................................................................................... SC -7 D-12 CONTRACTOR COMPLIANCE WITH WORKER'S COMPENSATION LAW ......... SC -8 D-13 MINORITY AND WOMENS BUSINESS ENTERPRISE (M/WBE)COMPLIANCE. SC -10 D-14 CALENDAR DAY.............................................................................................. SC -12 D-15 SUBSIDIARY WORK........................................................................................... SC -12 D-16 WAGE RATES..................................................................................................... SC -12 D-17 EASEMENTS AND PERMITS.............................................................................. SC -14 D-18 COORDINATION WITH FORT WORTH WATER DEPARTMENT ....................... SC -14 D-19 DAMAGE TO PRIVATE PROPERTY................................................................... SC -14 D-20 SHOP DRAWINGS.............................................................................................. SC -14 D-21 CROSSING OF EXISTING UTILITIES................................................................. SC -15 D-22 EXISTING UTILITIES AND IMPROVEMENTS............:........................................ SC -15 D-23 CONSTRUCTION TRAFFIC OVER PIPELINES .................................................. SC -16 D-24 TRAFFIC CONTROL............................................................................................ SC -16 D-25 PAYMENT............................................................................................................ SC -17 D-26 DELAYS........................................................................ SC -17 SC -17 D-27 DETOURS............................................................................................................ SC -17 D-28 BARRICADES AND WARNING SIGNS............................................................... D-29 EXAMINATION OF SITE...................................................................................... SC -18 D-30 ZONING COMPLIANCE....................................................................................... SC -18 D-31 WATER FOR CONSTRUCTION.......................................................................... SC -18 D-32 WASTE MATERIAL.............................................................................................. SC -18 D-33 CLEANUP FOR FINAL ACCEPTANCE................................................................ SC -18 D-34 PROPERTY ACCESS.......................................................................................... SC -18 D-35 CONSTRUCTION SCHEDULE AND SEQUENCING OF WORK ......................... SC -18 D-36 SAFETY RESTRICTIONS - WORK NEAR HIGH VOLTAGE LINES .................... SC -18 D-37 CONTRACTOR'S RESPONSIBILITY FOR DAMAGE CLAIMS ............................ SC -19 D-38 SANITARY FACILITIES FOR WORKERS............................................................ SC -20 D-39 LEGAL RELATIONS AND RESPONSIBILITIES TO THE PUBLIC ....................... SC -20 D-40 RIGHT TO AUDIT .................................. .............................................................. SC -20 D-41 INCREASE OR DECREASE IN QUANTITIES..................................................... SC -21 D-42 CUTTING OF CONCRETE.................................................................................. SC -21 D-43 PROJECT DESIGNATION SIGN......................................................................... SC -22 D-44 CONCRETE SIDEWALK AND DRIVEWAY REPLACEMENT .............................. SC -22 D-45 MISCELLANEOUS PLACEMENT OF MATERIAL ................................................. SC -22 D-46 TYPE "C" BACKFILL.......................................... .................................................. SC -22 D-47 CRUSHED LIMESTONE BACKFILL.................................................................... SC -23 D-48 2:27 CONCRETE ................................... .............................................. .............. . SC -23 D-49 TRENCH EXCAVATION, BACKFILL AND COMPACTION .................................. SC -23 04/21/99 SC -1 0 PART D - SPECIAL CONDITIONS D-50 PAVEMENT REPAIR (E2-19).:,........................................................................... SC -24 D-51 TRENCH SAFETY SYSTEM FOR WATER DEPARTMENT PROJECTS ONLY.. SC -25 D-52 SANITARY SEWER MANHOLES.............................................................."......... SC -26 D-53 SANITARY SEWER SERVICES.......................................................................... SC -29 D-54 NOT USED........................................................................................................... SC -30 D-55 REMOVAL, SALVAGE AND ABANDONMENT OF EXISTING FACILITIES......... SC -30 D-56 DETECTABLE WARNING TAPES................................................•....................... SC -32 D-57 PIPE CLEANING.................................................................................................. SC -32 D-58 BARRICADES, WARNINGS AND FLAGMEN....................................................... SC -32 D-59 DISPOSAL OF SPOIL/FILL MATERIAL............................................................... SC -32 D-60 MECHANICS AND MATERIALMEN'S LIEN ......................................................... SC -33 D-61 SUBSTITUTIONS................................................................................................. SC -33 D-62 PRECONSTRUCTION TELEVISION INSPECTION/SANITARY SEWER LINES. SC -33 D-63 VACUUM TESTING OF SANITARY SEWER MANHOLES .................................. SC -36 D-64 BYPASS PUMPING............................................................................................. SC -37 D-65 POST -CONSTRUCTION TELEVISION INSPECTION OF SANITARY SEWERS SC -38 b-66 SAMPLES AND QUALITY CONTROL TESTING .................................................. SC -39 D-67 D-68 TEMPORARY EROSION SEDIMENTS AND WATER POLLUTION CONTROL.. INGRESS AND EGRESS/ ACCESS TO DRIVES ................................................ SC -40 SC -41 D-69 PROTECTION OF TREES, PLANTS AND SOIL .................................................. SC -41 D-70 D-71 SITE RESTORATION.......................................................................................... STANDARD PRODUCT LIST............................................................................... SC -41 SC -41 D-72 STATE REVOLVING FUND (SRF). REQUIREMENTS ......................................... SC -42 D-73 D-74 TOPSOIL, SODDING AND SEEDING.................................................................. CONFINED SPACE ENTRY PROGRAM............................................................. SC -42 SC -47 D-75 SUBSTANTIAL COMPLETION INSPECTION/FINAL INSPECTION ................... SC -47 D-76 D-77 EXCAVATION -NEAR TREES ........................... ....... CONCRETE ENCASEMENT OF SEWER PIPE..................................................SC-49 SC -48 D-78 CLAY DAM........................................................................................................... SC -49 D-79 ,D-80 EXPLORATORY EXCAVATION (D-HOLE).......................................................... INSTALLATION OF WATER FACILITIES............................................................ SC -49 SC -49 80.1 POLYVINYAL (CHLORIDE PVC) WATER PIPE .................................................. SC -49 80.2 BLOCKING SC -49 80.3 ........................................................................................................... TYPE OF CASING PIPE...................................................................................... SC -50 0 80.4 TIE-INS................................................................................................................ SC -50 80.5 CONNECTION OF EXISTING MAINS................................................................. SC -50 80.6 VALVE CUT-INS.................................................................................................. SC -51 0 80.7 WATER SERVICES............................................................................................. SC -51 80.8 2 -INCH TEMPORARY SERVICE LINE................................................................ SC -53 80.9 ADJUST MANHOLES AND VAULTS (UTILITY CUT) .......................................... SC -54 80.10 ADJUST WATER VALVE BOXES........................................................................ SC -54 80.11 PURGING AND STERILIZATION OF WATER LINES .......................................... SC -54 80.12 WORK NEAR PRESSURE PLANE BOUNDARIES .............................................. SC -54 80.13 WATER SAMPLE STATION................................................................................ SC -55 80.14 DUCTILE IRON AND GRAY IRON FITTINGS ..................................................... SC -55 D-81 SPRINKLING FOR DUST CONTROL.................................................................. SC -56 D-82 ........................ DEWATERING........................................................................... .. SC -56 D-83 TRENCH EXCAVATION FOR DEEP TRENCHES ............................................... SC -56 D-84 TREE PRUNING.................................................................................................. SC -56 0 04/21/99 SC -2 0 0 D 0 0 0 0 0 0 a o- 0 0 0 0 0 0 0 0 0 PART D - SPECIAL CONDITIONS D-85 TREE REMOVAL..................................................................................*............... SC -57 D-86 TEST HOLES...................................................................................................... SC -57 04/21/99 SC -3 9 0 PART D - SPECIAL CONDITIONS FOR: REHABILITATION OF M-390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8 FORT WORTH, TEXAS DOE PROJECT NOS 1828, 2526, 2527 AND. 2528 SEWER PROJECT NO. PS46-070460410280 D-1 AWARD OF CONTRACT: The City reserves the right to abandon without obligation to the contractor, any part of the project,or the entire project, at any time before the contractor begins any construction work authorized by the City. Award, if made, shall be' to the responsive low bidder. The following shall apply for contract documents with multiple units of work. Each unit represents a separate project, each with an individual M/WBE specification and proposal section. The proposal sections are arranged to allow prospective bidders to submit bids on one unit, some of the units, or all of the units. Award of contract(s), if made, shall be to the responsive low bidder for each individual unit. If a contractor is the responsive low bidder on two units or more, a single set of contract documents consisting of all applicable units will be created and one single award of contract shall be made. The Contractor shall comply with the City's M/WBE Ordinance on each unit. Bidders shall submit individual and separate monthly M/WBE reports for each Unit included in the Contract. Construction time on all units will run concurrently. For situations involving approved contracts with multiple units, the total allowable construction completion time period for all the units shall be the same as the unit with the longest construction time period. D-2 SUBMISSION OF CONTRACT DOCUMENTS, CONSTRUCTION START TIME AND PRE -CONSTRUCTION SUBMITTALS: The contractor(s) shall execute and return the contract documents to the Department of Engineering within ten (10) working days after notification by the City. A Pre -Construction meeting date will be established and noted in the Letter to Contractor. The effective work order date will be set at the pre -construction conference. The contractor(s) shall be required to start construction on the project no later than ten (.10) calendar working days after the pre -construction meeting date. The City shall begin to charge time on the project to the contractor eleven days after the pre -construction meeting date. Per City ordinance 11923, the contractor(s) shall submit the letters of intent or a copy of the agreements with the approved M/WBE subcontractor(s) at or before the pre -construction conference. To expedite M/WBE compliance contractors are strongly encouraged to submit the executed letters of intent (with M/WBE subcontractors) at the time of submittal of the UTILIZATION FORM or GOOD FAITH EFFORT FORM. The letter(s) must be signed by both parties. If the contractor(s) fails to submit the letter(s) or agreement(s), the contractor(s) will not be allowed to begin work. Time on the project will start to accumulate at the end of the ten (10) days as stipulated above. 0 0 04/21/99 SC -4 0 a PART D - SPECIAL CONDITIONS aAdditional submittals at time of pre -construction meeting shall include (but not limited to): Contractors Work Plan and Schedule Disposal Site for Waste Material Information Sub -Contractor Identification Trench Safety Design (if required) Confined Space Entry Program Name and number of a responsible person for off hour emergencies afl Project schedule which must reflect a project completion date to be determined by the completion time period stipulated in the proposal section. fl The pre -construction conference is intended as a forum between the contractor and the appropriate City staff to go over the project in detail and to afford the contractor the opportunity to submit all the required documents listed above. LiIf the contractor fails to submit any of the required documents, the contractor will not be allowed to begin work and time on the project will start to accumulate. D-3 GENERAL: The order or precedence in case of conflicts or discrepancies between various parts of the a Contract Documents subject to the ruling of the Engineer shall generally, but not necessarily, follow the guidelines listed below: 1. Plans 2. Contract Documents 3. Special Conditions The following Special Conditions shall be applicable to this project and shall govern over any conflicts with the General Contract Documents under the provisions stated above. The Contractor shall be responsible for defects in this project due to faulty materials and workmanship, or both, for a period of one (1) year from date of final acceptance of this project by the City Council of the City of Fort Worth and will be required to replace at his expense any part or all of this project which becomes defective due to these causes. The City reserves the right to abandon, without obligation to the Contractor, any part of the 0 project, or the entire project, at any time before the Contractor begins any construction work authorized by the City. Contract, if awarded, shall be as described in "Award of Contract" above. Subject to modifications as herein contained, the Fort Worth Water Department's General Contract Documents and General Specifications, with latest revisions, are made a part of the General Contract Documents for this project. The Plans, these Special Contract Documents and a the rules, regulations, requirements, instructions, drawings or details referred to by manufacturers name, or identification include therein as specifying, referring or implying product control, performance, quality, or other shall be binding upon the contractor. The specifications and afl drawings shall be considered cooperative; therefore, work or material called for by one and not shown or mentioned in the other shall be accomplished or furnished in a faithful manner as though required by all. U 9 04/21/99 SC -5 PART D - SPECIAL CONDITIONS Any Contractor performing any work on Fort Worth water or sanitary sewer facilities must be pre - qualified with the Water Department to perform such work in accordance with procedures described in the current Fort Worth Water Department General Specifications, which general specifications shall govern performance of all such work. This contract and project, where applicable, may also be governed by the two following published specifications, except as modified by these Special Provisions: 1. STANDARD SPECIFICATIONS FOR STREET AND STORM DRAIN CONSTRUCTION - CITY OF FORT WORTH 2. STANDARD SPECIFICATIONS FOR PUBLIC WORKS CONSTRUCTION - NORTH CENTRAL TEXAS A copy of either of these specifications may be purchased at the office of the Transportation and Public Works Director, 1000 Throckmorton Street, 2nd Floor, Municipal Building, Fort Worth, Texas 76102. The specifications applicable to each pay item are indicated by the call -out for the pay item by the designer. If not shown, then applicable published specifications in either of these documents may be followed at the discretion of the Contractor. General Provisions shall be those of the Fort Worth document rather than Division 1 of the North Central Texas document. Bidders shall not separate, detach or remove any portion, segment or sheets from the contract document at any time. Failure to bid or fully execute contract without retaining contract documents intact may be grounds for designating bids as "nbn-responsive" and rejecting bids or voiding contract as appropriate as determined by the City Engineer. INTERPRETATION AND PREPARATION OF PROPOSAL: A. DELIVERY OF PROPOSAL: No proposal will be considered unless it is delivered, accompanied by its proper Bid Security, to the Purchasing Manager or his representative at the official location and stated time set forth in the "Notice to Bidders". It is the Bidder's sole responsibility to deliver the proposal at the proper time to the proper place. The mere fact that a proposal was dispatched will not be considered. The Bidders must have the proposal actually delivered. Each proposal shall be in a sealed envelope plainly marked with the word "PROPOSAL", and the name or description of the project as designated in the "Notice to 'Bidders". The envelope shall be addressed to the Purchasing Manager, City of Fort Worth Purchasing Division, PO Box 17027, Fort Worth, Texas 76102. B. WITHDRAWING PROPOSALS: Proposals actually filed with the Purchasing Manager cannot be withdrawn prior to the time set for opening proposals. A request for non -consideration of a proposal must be made in writing, addressed to the City Manager, and filed with him prior to' the time set for the opening of proposals. After all proposals not requested for non - consideration are opened and publicly read aloud, the proposals for which non -consideration requests have been properly filed ma , at the option of the Owner be returned unopened. C. TELEGRAPHIC MODIFICATION OF PROPOSALS: Any bidder may modify his proposal by telegraphic communication at any time prior to the time set for opening proposals, provided such telegraphic communication is received by the Purchasing Manager prior to the said proposal opening time, and provided further, that the City Manager is satisfied that a written 04/21/99 SC -6 I PART D - SPECIAL CONDITIONS 0 I 0 C 0 D-5 PROJECT DESIGNATION: Construction under these Special Documents shall be fl performed under the Project Designation: Project No. PS46-070460410280 D-6 EQUAL EMPLOYMENT PROVISIONS: Contractor shall comply with City Ordinance Number 7278 as amended by City Ordinance Number 7400 (Fort Worth City Code Sections 13- A-21 through 12-A-29) prohibiting discrimination in employment practices. and duly authenticated confirmation of such telegraphic communication over the signature of the bidder was mailed prior to the •proposal opening time. If such confirmation is not received within forty-eight (48) hours after the proposal opening time, no further consideration will be given to the proposal. D-4 TAX EXEMPTIONS: This contract is issued by an organization which qualifies for exemption pursuant of the provisions of Article 20.04(F) of the Texas Limited Sales, Excise and Use Tax Act. All equipment and materials not consumed by or incorporated into the project construction, are subject to State sales tax under House Bill 11, enacted August 15, 1991. All such taxes shall be included in the various amounts on the Proposal Form. The successful Bidder shall be required to submit a breakdown between labor and material costs prior to execution of the contract. The Contractor shall post the required notice to that effect on the project site, and at his request, will be provided assistance by the City of Fort Worth's Equal Employment Officer who will refer any qualified applicant he may have on file in his office to the Contractor. Appropriate notices may be acquired from the Equal Employment Officer. D-7 PRE -CONSTRUCTION CONFERENCE: Before the project work order is issued, a pre - construction conference shall be held with representatives of the following agencies present: City Engineering Department, City Water Department, City Public Works Department, other interested City Departments (such as Traffic), interested utility companies (such as gas, telephone, and electric), Design Engineer and the successful Contractor. Contractor shall submit a schedule of operations at the pre -construction conference. D-8 COORDINATION MEETINGS: For coordination purposes, weekly meetings at the -job 0 site may be required to maintain the project on the desired schedule. The Contractor shall be present at all meetings. fl D-9 PROJECT ABANDONMENT: The City reserves the right to abandon, without obligation LI to the Contractor, any part of the project, or the entire project, at any time before the Contractor begins any construction work authorized by the City. D-10 BREAKDOWN OF BID PROPOSAL: When requested by the Engineer, the Contractor shall furnish a cost breakdown of those bid items shown in the Proposal as lump sum items. This information is for use in the preparation of a recommendation to the City for award of contract. D-11 INDEMNIFICATION: The Contractor agrees to fully indemnify and save whole and fl harmless the City, Owner and Engineer from all costs or damages arising out of any real or asserted claim or cause of action against it of any kind or character and in addition from any and all costs or damages arising out of any wrongs, injuries, demands or suits for damages, either real or asserted, claimed against it that may be occasioned by any act, omission, neglect or 9 04/21/99 SC -7 a PART D - SPECIAL CONDITIONS misconduct of the said Contractor, his agents, servants and employees. The Contractor further agrees to comply with all applicable laws, regulations, ordinances, building and construction codes of the City of Fort Worth and State of Texas and with any regulations for the protection of workers which may be promulgated by the Government and shall protect such work with all necessary lights, barriers, safeguards and warnings as are provided for in said specifications and in the ordinances of said City. p D12 CONTRACTOR COMPLIANCE WITH WORKER'S COMPENSATION LAW: A. Definitions: 0 1. Certification of coverage ("certificate"). A copy of a certificate of insurance, a certificate of authority to self -insure issued by the commission, or a coverage agreement (TWCC-81, TWCC-82, TWCC-83, or TWCC-84), showing statutory workers' compensation insurance coverage for the person's or entity's employees providing services on a project, for the duration of the project. o 2. Duration of the project- includes the time from the beginning of the work on the project until the contractor's/person's work on the project has been completed and accepted by the governmental entity. 3. Persons providing services on the project ("subcontractor" in §406.096)- includes all persons or entities performing all or part of the services the contractor has undertaken to 0 perform on the project, regardless of whether that person contracted directly with the contractor and regardless of whether that person has employees. This includes, without + _ limitation, independent contractors, subcontractors, leasing companies, motor carriers, owner operators, employees of any such entity, or employees of any entity which furnishes persons to provide services on the project. "Services" include, without limitation, providing, hauling, or delivering equipment or materials, or providing labor, transportation, or other services related to a project. "Services" does not include activities unrelated to the project, such as food/beverage vendors, office supply deliveries, and delivery of portable, toilets. ! I B. The Contractor shall •provide coverage, based on proper reporting of classification codes and payroll amounts and filing of any coverage agreements, which meets the statutory requirements of Texas Labor Code, Section 401.011(44) or all employees of the Contractor �J providing services on the project, for the duration of the project. C. The Contractor must provide a certificate of coverage to the governmental entity prior to being 0 awarded the contract. D. If the coverage period showh on the contractor's current certificate of coverage ends during 0 the duration of the project, the contractor must, prior to the end of the coverage period, file a new certificate of coverage with the governmental entity showing that coverage has been extended. E. The Contractor shall obtain from each person providing services on a project, and provide the governmental entity: -a 04/21/99 S C-8 a I: PART D - SPECIAL CONDITIONS 1. A certificate of coverage, prior to that person beginning work on the' project, so the governmental entity will have on file certificates of coverage showing coverage for all ppersons providing services on the project; and 2. No later than seven days after receipt by the contractor, a new certificate of coverage fl showing extension of -coverage, if the coverage period shown on the current certificate of coverage ends during the duration of the project. fl F. The contractor shall retain all required certificates of coverage for the duration of the project and for one year thereafter. fl G. The contractor shall notify the governmental entity in writing by certified mail or personal LI delivery, within ten (10) days after the contractor knew or should have known,, of any change that materially affects the provision of coverage of any person providing services on the Qproject. H. The contractor shall post on each project site a notice, in the' text, form and manner fl prescribed by the Texas Worker's Compensation Commission, informing all persons providing services on the project that they are required to be covered, and stating how a person may verify coverage and report lack of coverage. 9 I. The contractor shall contractually require each person with whom it contracts to provide services on a project, to: 9 1. Provide coverage, based on proper reporting on classification codes and payroll amounts and filing of any coverage agreements, which meets the statutory requirements of Texas Labor Code, Section 401.011(44) for all of its employees providing services on the project, for the duration of the project; 2. Provide to the Contractor, prior to that person beginning work on the project, a certificate 9of coverage showing that coverage is being provided for all employees of the person providing services on the project, for the duration of the project; 0 3. Provide the Contractor, prior to the end of the coverage period, a new certificate of coverage showing extension of coverage, if the coverage period shown on the current certificate of coverage ends during the duration of the project; 0 4. Obtain from each other person with whom it contracts, and provide to the Contractor: 9 a.) A certificate of coverage, prior to the other person beginning work on the project; and b.) A new certificate of coverage showing extension of coverage, prior to the end of the fl coverage period, if the coverage period shown on the current certificate of coverage Li ends during the duration of the project. fl 5. Retain all required certificates of coverage on file for the duration of the project and for one year thereafter. 0 0 04/21/99 SC -9 0 PART D - SPECIAL CONDITIONS 6. Notify the governmental entity in writing by certified mail or personal delivery, within ten (10) days after the person knew or should have known, of any change that materially affects the provision of coverage of any person providing services on the project; and 7. Contractually require each person with Whom it contracts, to perform as required by paragraphs (1)-(7), with the certificates of coverage to be provided to the person for whom they are providing services. 8. By signing this contract or providing or causing to be provided a certificate of coverage, the contractor is representing to the governmental entity that all- employees of the contractor who will provide services on the project will be covered by worker's compensation coverage for the duration of the project, that the coverage will be based on proper reporting of classification codes and payroll amounts, and that all coverage agreements- will be filed with the appropriate insurance carrier or, in the case of a self - insured, with the commission's Division of Self -Insurance Regulation. Providing false or misleading information may subject the contractor to administrative, criminal, civil penalties or other civil actions. 9. The contractor's failure to comply with any of these provisions is a breach of contract by Q the contractor which entitles the governmental entity to declare the contract void if the contractor does not remedy the breach within ten days after receipt of notice of breach from the governmental entity. J. The contractor shall post a notice on each project site informing all persons providing services on the project that they are required to be covered, and stating how a person may verify 0 current coverage and report failure to provide coverage. This notice does not satisfy other posting requirements imposed by the Texas Worker's Compensation Act or other Texas Worker's Compensation Commission rules. This notice must be printed with a title in at least 0 30 point bold type and text in at least 19 point normal type, and shall be in both English and Spanish and any other language common to the worker population. The text for the notices shall be the following text, without any additional words or changes: 0 "REQUIRED WORKER'S COMPENSATION COVERAGE 0 The law requires that each person working on this site or providing services related to this Construction project must be covered by workers' compensation insurance. This includes persons providing, hauling, or delivering equipment or materials, or providing labor or transportation or other service related to the project, regardless of the identity of their employer or status as an employee." o Call the Texas Worker's Compensation Commission at (512)440-3789 to receive information on the legal requirement for coverage, to verify whether your employer has provided the required coverage, or to report an employer's failure to provide coverage". o D-13 MINORITY AND WOMENS BUSINESS ENTERPRISE (MIWBE) COMPLIANCE: In accordance with City of Fort Worth Ordinance No. 11923, the City of Fort Worth has goals for the participation of minority business enterprises and women business enterprises in City contracts. The Ordinance • is incorporated in these specifications by reference. A copy of the Ordinance may a 04/21/99 SC -10 0 0 PART D - SPECIAL CONDITIONS I 11 0 CIS I I 0 I 0 0 0 0 I 0 0 0 be obtained from the Office of the City Secretary. Failure to comply with the ordinance shall be a material breach of contract. The M/WBE UTILIZATION FORM, M/WBE GOALS WAIVER FORM AND GOOD FAITH EFFORT FORM, as applicable, must be submitted within five (5) city business days after bid opening. Failure to comply shall render the bid non -responsive. Upon request, contractor agrees to provide the City complete and accurate information regarding actual work performed by a Minority or Women Business Enterprise (M/WBE) on the contract and payment thereof. Contractor further agrees to permit an audit and/or examination of -any books, records or files in its possession that will substantiate the actual work performed by an MBE and/or WBE. The misrepresentation of acts (other than a negligent misrepresentation) and/or the commission of fraud by the Contractor will be grounds for termination of the contract and/or initiating action under appropriate federal, state, or local laws or ordinances relating to false statement. Further, any such misrepresentation (other than a negligent misrepresentation) and/or commission of fraud will result in the Contractor being determined to be irresponsible and barred from participating in City work for a period of time of not less than three years. The City will consider the contractor's performance regarding its M/WBE program in the evaluation of bids. Failure to comply with the City's M/WBE Ordinance, or to demonstrate "good faith effort", shall result in a bid being rendered non -responsive to specifications. Contractor shall provide copies of subcontracts or co-signed letters of intent with approved M/WBE subcontractors prior to issuance of the Notice to Proceed. Contractor shall also provide monthly reports on utilization of the subcontractors to the City's M/WBE office. The Contractor may count first and second tier subcontractors and/or suppliers toward meeting the goals. The Contractor may count toward its goal a portion of the total dollar amount of the contract with a joint venture equal to the percentage of the M/WBE participation in the joint venture for a clearly defined portion of the work to be performed: All M/WBE contractors used in meeting the goals must be certified prior to the award of the Contract. The M/WBE contractor(s) must be certified by either the North Central Texas Regional Certification Agency (NCTRCA) or Texas Department of Transportation (TxDOT), Highway Division and must be located in the nine (9) county marketplace at time of bid. The Contractor shall contact all such M/WBE subcontractors or suppliers prior to listing them on the M/WBE utilization or good faith effort forms as applicable. Failure to contact the listed M/WBE subcontractor or supplier prior to bid opening may result in the rejection of bid as non -responsive. Whenever a change order affects the work of an M/WBE subcontractor or supplier, the M/WBE shall be given an opportunity to perform the work. Whenever a change order exceeds 10% of the original contract, the M/WBE coordinator shall determine the goals applicable to the work to be performed under the change order. During the term of the contract the contract shall: 1. Make no unjustified changes or deletions in it's M/WBE participation commitments submitted with or subsequent to the bid, and, 2. If substantial subcontracting and/or substantial supplier opportunities arise during the term of the contract which the contractor had represented he would perform with his forces, the 04/21/99 SC -11 I PART D - SPECIAL CONDITIONS contractor shall notify the City before subcontracts or purchase orders are let, and shall be required to comply with modifications to goals as determined by the City, and , 3. Submit a REQUEST FOR APPROVAL OF CHANGE FORM, if the contractor desires to change or delete any of the M/WBE subcontractors or suppliers. Justification for change may be granted for the following: a. Failure of Subcontractor to provide evidence of coverage by Worker's Compensation Insurance. b. Failure of Subcontractor to provide required general liability of other insurance. c. Failure of Subcontractor to execute a standard subcontract form in the amount of the proposal used by the Contractor in preparing his M/WBE Participation plan. d. Default by the M/WBE subcontractor or supplier in the performance of the subcontractor. Within ten (10) days after final payment from the City, the contractor shall provide the M/WBE Office with documentation to reflect final participation of each subcontractor and supplier used on the project, inclusive of M/WBEs. D-14 CALENDAR DAY: Delete paragraph C1-1.24, in Part C -General Conditions, in its entirety and substitute the following new paragraph: C1-1. 4 Calendar Day: A Calendar day is any day of the week or month. The Contractor will not be allowed to work on Sundays or any holidays observed by the City of Fort Worth. D-15 SUBSIDIARY WORK: Any and all work specifically governed by documentary requirements for the project, such as conditions imposed by the Plans, the General Contract Documents or these Special Contract Documents, in which no specific item for bid has been provided for in the Proposal, shall be considered as a subsidiary item of work, the cost of which shall be included in the price bid in the Proposal for each bid item. Surface restoration,'removal 'and replacement of fencing, ,and cleanup are general items of work which fall in the category of subsidiary work. D-16 WAGE RATES: The labor classifications and minimum wage rates set forth herein have been predetermined by the City Council of the City of Fort Worth, Texas, in accordance with statutory requirements, as being the prevailing classifications and rates that shall govern on all work performed by the Contractor or any Subcontractor on the site of the project covered by these Contract Documents. In no event shall less than the following rates of wages be paid. (Attached) 1 04/21/99 SC -12 C' I PART D - SPECIAL CONDITIONS 0 0 0 u 0 0 II 0 0 I I 0 I 0 CITY OF FORT WORTH HIGHWAY CONSTRUCTION PREVAILING WAGE RATE FOR 1995 CLASSIFICATION RATE CLASSIFICATION RATE Air Tool Operator $7.554 Form Liner $8.913 Asphalt Raker $8.565 Form Setter (Pav & Curb) $8.686 Asphalt Shoveler $8.255 Form Setter (Structures) $8.427 Batching Plant Weigher $9.371 Laborer, Common $6.402 Batterboard Setter $8.920 Laborer, Utility $7.461 Carpenter $9.447 Mechanic $10.658 Concrete Finisher (PAV) $9.345 Oiler $8.698 Concrete Finisher (STRS) $9.058 Servicer $8.104 Concrete Rubber $7.733 Piledriver $7.500 Electrician $12.761 Pipelayer $8.509 Flagger $5.598 Blaster $11.333 Form Builder (STRS) $8.717 POWER EQUIPMENT OPERATORS Asphalt Distributor $8.404 Posthole Driller Operator $9.000 Asphalt Paving Machine $9.053 Roller, Steel Wheel Broom or Sweeper Operator $7.908 (Plant -Mix Pavements) $8.339 Bulldozer, 150 HP or Less $8.703' Roller, Steel Wheel Bulldozer, Over 150 HP $9.160 (Flatwheel or Tamping) $7.963 Concrete Paving Curing Mach.$8.213 Roller, Pneumatic Self -Pro $7.403 Concrete Pav Finishing Mach. $9.453 Scraper - 17 CY & Less $8.138 Concrete Paving Form Grader$8.500 Scraper - Over 17 CY $8.205 Concrete Paving Joint Mach. $9.042 Side Boom $7.793 Concrete Paving Joint Sealer $7.350 Tractor - Crawler Type Concrete Paving Float $7.875 (150 HP & Less) $8.448 Concrete Paving Saw $9.290 Tractor - Crawler Type Concrete Paving Spreader $9.750 (Over 150 HP) $8.873 Slipform Machine $9.000 Tractor - Pneumatic $7.735 Crane, Clamshell, Backhoe, Traveling Mixer $7.615 Derrick, Dragline, Shovel Trenching Machine - Light $8.188 (Less than 1 Y2 cy) $9.513 Trenching Machine - Heavy $12.498 Crane, Clamshell, Backhoe, Wagon -Drill, Boring Machine $9.000 Derrick, Dragline, Shovel Reinforcing Steel Setter (1`% cy & Over) $10.517 (Paving) $9.218 Crushing or Scrng Pit Opr. $9.500 Reinforcing Steel Setter Elevating Grader Foundation (Structural) $11.548 Drill Oper. (Crawler Mounted) $10.000 Steel Worker - Structural $16.300 Foundation Drill Operator Sign Erector $11.436 (Truck Mounted) $11.138 Spreader Box Operator $6.988 Foundation Drill Opr Helper Barricade Servicer Zone Wk. $6.402 Front Ent Loader Mounted Sign Installer (2' /2 CY or Less) $8.823 (Permanent Ground) $6.402 El 04/21/99 SC -13 lit PART D - SPECIAL CONDITIONS CLASSIFICATION RATE CLASSIFICATION RATE Front Ent Loader Truck Driver - Single Axle (Over 2 Y2 CY) $9.311 (Light) $7.465 Hoist (Double Drum & Less) $8.917 Truck Driver - Single Axle Milling Machine Operator $6.650 (Heavy) $8.067 Mixer (Over 16 CF) $9.000 Truck Driver - Tandem Axle Mixer -(16 CF & Less) $7.913 .(Semi -Trailer) $7.816 Mixer - Concrete Paving $9.500 Truck Driver - Lowboy/Float $9.653 Motor Grader Operator Truck Driver - Transit Mix $7.507 (Fine Grade) $10.346 Truck Driver -Winch $8.200 Motor Grader Operator $9.891 Vibrator Operator $7.000 Pavement Marking Machine $6.402, Welder $10.459 D-17 EASEMENTS AND PERMITS: The performance of this contract requires certain temporary construction and/or right -of -entry agreements to perform work on private property. The City has attempted to obtain the temporary construction and/or right -of -entry agreements for properties where construction activity is necessary on City owned facilities, such as sewer lines or manholes. For locations where the City was unable to obtain the easement or right -of -entry, it shall be the Contractor's responsibility to obtain the agreement prior to beginning work on subject property. This shall be subsidiary to the contract. The agreements which the City has obtained are available to the Contractor for review by contacting the plans desk at the Department of Engineering, City of Fort Worth. Also, it shall be the responsibility of the Contractor to obtain written permission from property owners to perform such work as cleanout repair and sewer service replacement on private property. Contractor shall adhere to all requirements of Paragraph C6-6.10 of the General Contract Documents. The Contractor's attention is directed to the agreement terms along with any special conditions that may have been imposed on these agreements, by the property owners. The easements and/or private property shall be cleaned up after use and restored to its original condition or better. In event additional work room is required by the Contractor, it shall be the Contractor's responsibility to obtain written permission from the property owners involved for the use of additional property required. No additional payment will be allowed for this item. D-18 COORDINATION WITH FORT WORTH WATER DEPARTMENT: During the construction of this project, it will be necessary to deactivate, for a period of time, existing lines. The Contractor shall be required to coordinate with the Water Department to determine the best times for deactivating and activating those lines. D-19 DAMAGE TO PRIVATE PROPERTY: The Contractor shall immediately repair or replace any damage to private property, including but not limited to fences, walls, pavement and water and sewer services, at no cost to the Owner. This shall be subsidiary to the contract and not a separate pay item. D-20 SHOP DRAWINGS: Shop drawings shall be submitted by the Contractor to the Construction Engineer, for all equipment and materials for this project. Contractor shall submit seven (7) copies of shop drawings, layouts, manufacturer's data and material schedules as may be required by the Engineer for his review. Such review by the Engineer shall include checking for general conformance with the design concept of the project and general compliance with LI 0 0 v 4 a II a 4 04121/99 SC -14 0 PART D - SPECIAL CONDITIONS 0 0 0 0 I 0 0 I 0 0 0 I information given in the General Contract Documents. Indicated action by the Engineer, which may result from his review, shall not constitute concurrence with any deviation from the plans and specifications unless such deviations are specifically identified by the method described below, and further shall not relieve the Contractor of responsibility for errors or omissions in the submitted data. Processed shop drawing submittal are not change orders. The purpose of submittals, by the Contractor, is to demonstrate that the Contractor understands the design concept, and that he demonstrates his understanding by indicating which equipment and materials he intends to furnish and install, and by detailing the fabrication and installation methods he intends to use. If deviations, discrepancies or conflicts between submittals and the design drawings and/or specifications are discovered, either prior to or after submittals are processed, the design drawings and specifications shall govern. The Contractor shall be responsible for all dimensions which are to be confirmed and correlated at the job site, fabrication processes and techniques of construction, coordination of his work with that of other trades and satisfactory performance of his work. The Contractor shall check and verify all measurements and review submittals prior to being submitted, and sign or initial a statement included with the submittal, which signifies compliance with the plans and specifications and dimensions sujtable for the application. Any deviation from the specified criteria shall be expressly stated in writing in the submittal. Shop drawings shall be submitted for the following items prior to installation: 1. All pipe 2. Reinforced steel fabrication for structures 3. Cast Iron structural appurtenances Shop drawings must be approved by the Engineer prior to the start of work. D-21 CROSSING OF EXISTING UTILITIES: Where a proposed water line crosses over a sanitary sewer or sanitary sewer service line and/or proposed sewer line crosses over a water line and the clear vertical distance is less than 9 feet barrel to barrel, the sanitary sewer or sanitary sewer service line shall be made water tight or be, constructed of ductile iron pipe. The required length of replacement shall be determined by the Engineer. The material for sanitary sewer mains and sanitary sewer laterals shall be Class 51 Ductile Iron Pipe with polyethylene wrapping. The material for sanitary sewer service lines shall be extra strength cast iron soil pipe with polyethylene wrapping. Adapter fittings shall be a urethane or neoprene coupling ASTM C-425 with series 300 stainless steel compression straps. Payment for work such as backfill, fittings, tie-ins and all other associated appurtenances required, shall be included in the linear foot price of the appropriate bid item. D-22 EXISTING UTILITIES AND IMPROVEMENTS: The plans show the location&of all known surface and subsurface structures. However, the Owner assumes no responsibility for failure to show any t r all of.these structures on the Plans, or to show them in their exact location. It is mutually agreed that such failure shall not be considered sufficient basis for claims for additional compensation for extra work or for increasing the pay quantities in any manner whatsoever. The Contractor shall be responsible for verifying the locations of and protecting all existing utilities, service lines, or other property exposed by his construction operations. Contractor shall make all necessary provisions for the support, protection, relocation, and/or temporary relocation of all utility poles, gas lines, telephone cables, utility services, water mains, sanitary sewer lines, electrical cables, drainage pipes, and all other utilities and structures both above and below 04/21/99 SC -15 0 PART D - SPECIAL CONDITIONS ground during construction. The Contractor is liable for all damages done to such existing 9 facilities as a result of his operations and any and all cost incurred for the protection and/or temporary relocation of such facilities shall be included in the cost bid per linear foot of pipe 0 installed. NO ADDITIONAL COMPENSATION WILL BE ALLOWED. Where existing, utilities or service lines are cut, broken or damaged the Contractor shall replace or repair the utilities or service lines with the same type of original material and construction, or better, unless otherwise shown or noted on the plans, at his own cost and expense. The Contractor shall immediately notify the Owner of the damaged, utility or service line. He shall cooperate with the Owners of all utilities to locate existing underground facilities and notify the Engineer of any conflicts in grades and alignment. Any and all permanent structures such as parking lot surface, fencing, and like structures shall be replaced at no cost to the City by material of equal value and quality as that damaged. In case it is necessary to change or move the property of any Owner of a public utility, such 0 property shall not be moved or interfered with until ordered to do so by the Engineer. The right is reserved to the owner of public utilities to enter upon the limits of the project for the purpose of making such changes or repairs of their property that may be made necessary by performance of this contract. The utility lines and conduits shown on the plans are for information only and are not guaranteed by the City of the Engineer to be accurate as to extent, location, and depth; they are shown on the plans as the best information available at the time of design, from the owners of the utilities involved and from evidences found on the ground. 0 D-23 CONSTRUCTION TRAFFIC OVER PIPELINES: It is apparent that certain construction 0 vehicles could exceed the load, bearing capacity of the pipe under shallow bury conditions. It will be the responsibility of the Contractor to protect both- the new line and the existing lines from these possibly excessive loads. The Contractor shall not, at any time, cross the existing or new pipe with a truck delivering new pipe to the site. Any damage to the existing or new' pipe will be 0 repaired or replaced by the Contractor, at the Contractor's expense, to the satisfaction of the City. In locations where it is not permissible to cross the existing or proposed pipes without additional protection the Contractor may elect to provide additional protection of the pipes so that more frequent crossings of the pipes are allowed. It still is, however, the responsibility of the Contractor to repair any damage to the existing or proposed lines, if the damage results from any phase of his construction operation. D-24 TRAFFIC CONTROL: Tile Contractor shall be responsible for providing traffic control during the construction of this project consistent with the provision set forth in the "1980 Texas Manual on Uniform Traffic Control Devices for Streets and Highways" issued under the authority of the "State of Texas Uniform Act Regulating Traffic on Highways," codified as Article 6701d Vernon's Civil Statutes, pertinent sections being Section Nos. 27, 29, 30 and 31. In addition, the Contractor shall comply with City of Fort Worth, Texas, February 1979, Traffic Control Handbook for Construction and Maintenance Work Areas. 0 The Contractor will not remove any regulatory sign, instructional sign, street name sign or other sign which has been erected by the City. If it is determined that a sign must be removed to 04121199 SC -16 0 PART D - SPECIAL CONDITIONS apermit required construction, the Contractor shall contact the Transportation/Public Works Department, Signs and Markings Division, (Phone Number 871-8100) to remove the sign. In the fl case of regulatory signs, the Contractor must replace the permanent sign with a temporary sign meeting the requirements of the above -referenced manual and such temporary sign must be installed prior to the removal of the permanent sign. If the temporary sign is not installed correctly fl or if it does not meet the required specifications, the permanent sign shall be left in place until the Li temporary sign requirements are met. When construction work is completed to the extent that the permanent sign can be reinstalled, the Contractor shall again contact the Signs and Markings Q Division to reinstall the permanent sign and shall leave his temporary sign in place until .such reinstallation is completed. 1. The Contractor shall furnish barricades, flares, etc., for the protection of the public and the work. 2. The cost of the traffic control shall be included in the price bid for pipe complete in place as bid in the Proposal, and no other compensation will be allowed. 3. The Contractor shall furnish a traffic control plan to the City at the pre -construction meeting. The cost for traffic control shall be subsidiary to the unit prices for this project. D-25 PAYMENT: Payment for all work and material involved in salvaging, abandoning, and/or Li removing of existing facilities shall be included in the linear foot bid price of the pipe except as follows: 1. Separate payment will be made for removal of all fire hydrants, gate valves 16 -inch and larger, and sanitary sewer manholes regardless of location. a2. Payment will be made for salvaging, abandoning, and/or removing of all other existing facilities when said facility is not being replaced in the same trench, i.e., when removal requires a separate trenching operation. u D-26 DELAYS: The Contractor shall receive no compensation for delays or hindrances to the work, except when direct and unavoidable extra cost to the Contractor is caused by the failure of the City to provide information or material, if any, which is to be furnished by the City. When such extra compensation is claimed, a written statement thereof shall be presented by the Contractor to the Engineer, and if by him found correct, shall be approved and referred by him to the Council for final approval or disapproval; and the action thereon by the Council shall be final and binding. If delay is caused by specific orders given by the Engineers to stop work, or by the performance of extra work, or by the failure of the City to provide material or necessary instructions for carrying fl on the work, then such delay will entitle the Contractor to an equivalent extension of time, his application for which shall, however, be subject to the approval of the City Council; and no such extension of time shall release the Contractor or the surety on his performance bond from all his fn obligations hereunder which shall remain in full force until the discharge of the contract. D-27 DETOURS: The Contractor shall prosecute his work in such a manner as to create a fl a minimum of interruption to traffic and pedestrian facilities and to the flow of vehicular and pedestrian traffic within the project area. 0 04/21/99 SC -17 v PART D - SPECIAL CONDITIONS D-28 BARRICADES AND WARNING SIGNS: Barricades, warning and detour signs shall conform to the Standard Specifications "Barriers and Warning and/or Detour Signs," Item 524, and/or as shown on the plans. Construction signing and barricades shall conform with "1980 Texas Manual on Uniform Traffic Control Devices, Vol. No. 1" or latest edition there of. b� D-29 EXAMINATION OF SITE: It shall be the responsibility of the prospective bidder to visit the project site and make such examination's and explorations as may be necessary to determine all conditions which may affect construction of this project. Particular attention should be given to methods of providing ingress and egress to adjacent private and public properties, procedures for protecting existing improvements and disposition of all materials to be removed. Proper consideration should be given to these details during the preparation of the Proposal and all unusual conditions which may give rise to later contingencies should be brought to the attention of the Owner prior to the submission of the Proposal. D-30 ZONING COMPLIANCE: During the construction of this project, the Contractor shall comply with present zoning requirements of the City of Fort Worth in the use of vacant property for storage purposes. D-31 WATER FOR CONSTRUCTION: Water for construction will be furnished by the Contractor at his own expense. D-32 WASTE MATERIAL: All waste material shall become the property of the Contractor and shall be disposed of by the Contractor at locations approved by the Engineer. All material shall be disposed of in such a manner as to present a neat appearance and to not obstruct proper drainage or to cause injury to street improvements or to abutting property. 0 D-33 CLEANUP FOR FINAL ACCEPTANCE: Final cleanup work shall be done for this project as soon as all construction has been completed. No more than seven days shall elapse after completion of construction before the roadway, right-of-way, or easement is cleaned up to the satisfaction of the Engineer. The Contractor shall make a final cleanup of all parts of the work before acceptance by the City of Fort Worth or its representative. This cleanup shall include removal of all objectionable rocks, pieces of asphalt or concrete and other construction materials, and in general preparing the site of the work in an orderly manner and appearance. Final acceptance of the completed project work shall be given by the City of Fort Worth Department of Engineering. D-34 PROPERTY ACCESS: Access to adjacent property shall be maintained at all times unless otherwise directed by the Engineer. D-35 CONSTRUCTION SCHEDULE AND SEQUENCING OF WORK: Prior to executing the Contract, it shall be the responsibility of the Contractor to furnish a schedule outlining the anticipated time for each phase of construction with starting and completion dates, including sufficient time being allowed for cleanup. 0 D-36 SAFETY RESTRICTIONS - WORK NEAR HIGH VOLTAGE LINES: The following �J procedures will be followed regarding the subject item on this contract: 1. A warning sign not less than five inches by seven inches, painted yellow with black letters that are legible at twelve feet shall be placed inside and outside vehicles such as cranes, o 04/21/99 SC -18 0 PART D - SPECIAL CONDITIONS 0 0 0 0 I 0 0 a C' 0 0 a 0 0 0 0 a derricks, power shovels, drilling rigs, pile drivers, hoisting equipment or similar apparatus. The warning sign shall read as follows: "WARNING - UNLAWFUL TO OPERATE THIS EQUIPMENT WITHIN SIX FEET OF NIGH VOLTAGE LINES." 2. Equipment that may be operated within ten feet of high voltage lines shall have insulating cage -type of guard about the boom or arm, except back hoes or dippers, and insulator links on the lift hook connections. 3. When necessary to work within six feet of high voltage electric lines, notification shall be given the power company (Texas Utility Electric) who will erect temporary mechanical barriers, de -energize the lines, or raise or lower the lines. The work done by the power company shall not be at the expense of the City of Fort Worth. The notifying department shall maintain an accurate log of all such calls to Texas Utility Electric, and shall record action taken in each case. 4. The Contractor is required to make arrangements with the Texas Electric Service company for the temporary relocation or raising of high voltage lines at the Contractor's sole cost and expense. 5. No person shall work within six feet of a high voltage line without protection having been taken as outlined in Paragraph (3). D-37 CONTRACTOR'S RESPONSIBILITY FOR DAMAGE CLAIMS: The Contractor covenants and agrees to indemnify, hold harmless and defend the City, and their officers, agents, servants or employees, and/or owners of the units and lot abutting the units in this contract from and against any and all claims for damages or, injuries, including death, to any and all persons or property, of whatsoever kind of character, whether real or asserted, arising out of or incident to the services relating to the project to be performed by said Contractor, its officers, agents, servants or employees, under the terms and conditions of this Contract, whether or not caused by negligence on the part of the City, or their officers, agents, servants or employees; and said Contractor does hereby covenant and agree to assume all liability end responsibility of City for injuries, claims or suits for damages to any and all persons or property, of whatsoever kind or character, occurring during the term of this agreement and arising out of or by reason of service, covenants or agreements performed by said Contractor, its officers, agents, servants or employees. Contractor likewise covenants and agrees to, and does hereby, indemnify and hold harmless the City from and against any and all injuries or damages to property of City during the performance of any of the terms and conditions of this Contract, whether arising out of or in connection with or resulting from any and all acts or omissions of the City, their officers, agents, servants, or employees, or caused by negligenceon the part of City, or their officers, agents, servants employees and/or owners of the units and lots abutting the units in this contract. In the event a written claim for damages against the Contractor remains unsettled at the time all work on the project has been completed to the satisfaction of the Director for the Department of Engineering, as evidenced by a final inspection, final payment to the Contractor shall not be recommended by the Director of Department of Engineering for a period of 30 days after the date of such final inspection, unless the Contractor shall submit written evidence satisfactory to the -Director that the claim has been settled and a release has been obtained from the claimant involved. D04/21/99 SC -19 PART D - SPECIAL CONDITIONS - Although the claim concerned remains unsettled as of the expiration"of the above 30 -day period, the Contractor may be deemed to be entitled to a semi-final payment for work completed, such semi-final payment to be in an amount equal to the total dollar amount then due less the dollar value of any written claims pending against the Contractor arising out of the performance of such work, and such semi-final payment may then be recommended by the Director. The Director shall not recommend final payment to.a Contractor against whom such a claim for damages is outstanding for a period of six months following the date of the acceptance for the work performed unless the Contractor submits evidence in writing satisfactory to the Director that: 1. The claim has been settled and a release has been obtained, from the claimant involved, or 2. Good faith efforts have been made to settle such outstanding class, and such good faith efforts have failed. If condition (1). above is met at any time within the six-month period, the Director shall recommend that the final payment to the Contractor be made. If condition (2) above is met at any time within the six-month period, the Director may recommend that the final payment to the Contractor be made. At the expiration of the six-month period, the Director may recommend that final payment be made if all other work has been performed and all other obligation of the Contractor have been met to the satisfaction of the Director. The Director may, if he deems it appropriate, refuse to accept bids on other Department of Engineering contract work from a Contractor against whom a claim for damages is outstanding as a result of work performed under a City contract or under a developer -let contract for City of Fort Worth street and/or storm drainage facilities. D-38 SANITARY FACILITIES FOR WORKERS: The Contractor shall provide all necessary sanitary conveniences for the use of workers at the project site. Specific attention is directed to this requirement. D-39 LEGAL RELATIONS AND RESPONSIBILITIES TO THE PUBLIC: The Contractor's particular attention is directed to the requirements df Item C-6-6, "Legal ',Relations and Responsibilities to the Public" of the Fort Worth General Conditions. D-40 RIGHT TO AUDIT: A. •Contractor agrees that the City shall, until the expiration of three (3) years after final payment under this contract have access to and the' right to examine and photocopy any directly pertinent books, documents, papers and records of the Contractor involving transactions relating to this contract. Contractor agrees that the City shall have access during normal working hours to all necessary Contractor facilities and shall be provided adequate and appropriate work space in order to conduct audits in compliance with the provisions of this section. The City shall give Contractor reasonable advance notice of intended audits. B. Contractor further agrees to include in all its subcontracts hereunder a provision to the effect that the subcontractor agrees that the City shall', under the expiration of three (3) years after final payment under the subcontract, have access to and. the right to examine and photocopy any directly pertinent books, documents, papers and records of such subcontractor, involving 04/21/99 S C-20 0 0 PART D - SPECIAL CONDITIONS 0 u 0 0 0 0 a I 0 0 0 0 LI] I transactions to the subcontract, and further, that City shall have access during normal working hours to all subcontractor facilities, and shall be provided adequate and appropriate work space, in order to conduct audits in compliance with the provisions of this article together with .subsection (c) hereof. City shall give subcontractor reasonable advance notice of intended and its. C. Contractor and subcontractor agree to photocopy such documents as may be requested by the City. The City agrees to reimburse Contractor for the cost of copies as follows: 1. copies and under - 10 cents per page 2. more than 50 copies - 85 cents for the first page plus fifteen cents for each page thereafter D-41 INCREASE OR DECREASE IN QUANTITIES: The quantities shown in the proposal are approximate. It is the Contractor's sole responsibility to verify all pay item quantities prior to submitting a bid. When the quantity of the work to be done or materials to be furnished under any pay item of the contract is more than 125% of the quantity stated in the contract, whether stated by Owner or by Contractor, then either party to the contract, upon demand, shall be entitled to negotiate for revised consideration on the portion of work above 125% of the quantity in the contract. When the quantity of the work to be done or materials to be furnished under any pay item of the contract is less than 75% of the quantity stated in the contract, whether stated by Owner or by Contractor, then either party to the contract, upon demand, shall be entitled to negotiate for revised consideration on the portion of work below 75% of the quantity stated in the contract. This paragraph shall not apply in the event Owner deletes a pay item in its entirety from this contract. In the event Owner and Contractor are unable to agree on a negotiated price, Owner and Contractor agree that the consideration will be the actual field cost of the work plus 15% as described herein below, agreed upon in writing by the Contractor and Director of Department of Engineering and Contractor and Director of Department of Engineering and approved by the City Council after said work is completed, subject to all other conditions of the contract. As used herein, field cost of the work will include the cost of all workmen, foremen, time keepers, mechanics and laborers; all materials, supplies, trucks, equipment rental for such time as actually used on such work only, plus all power, .fuel, lubricants, water and similar operating expenses; and a ratable portion of premiums on performance and payment bonds, public liability, Workers Compensation and all other insurance required by law or t5y ordinance. The Director of Department of Engineering will direct the form in which the accounts of actual field cost will be kept and will recommend in writing the method of doing the ,Iwork and the type and kind of equipment to be used, but such work will be performed by the Contractor as an independent Contractor and not as an agent or employee of the City. The 5% of the actual field cost to- be paid to the Contractor shall cover and compensate him for pro it, overhead, general supervision and field office expense, and all other elements of cost and xpense not embraced within the actual field cost as herein specified. Upon request, the Contr ctor shall provide the Director of Department of Engineering access to all accounts, bills and you hers relating thereto. D-42 CUTTING OF CONCRETE: When existing concrete is ;Cut, such cuts shall be made with a concrete saw. All sawing shall be subsidiary to the unit cost of the respective item. 0 04/21/99 SC -21 PART D - SPECIAL CONDITIONS D-43 PROJECT DESIGNATION SIGN: Project signs are required at all locatiohs. It shall be in accordance with the attached Figure 30 (dated 9-18-96). The signs may be mounted on skids or posts. The exact locations and methods of mounting shall be approved by the Engineer. In addition to the 4' x 8' project signs, project signs shall be attached to barricades used where manhole rehabilitation or replacement is being conducted. Signs suspended from barricading shall be placed in such a way that signs do not interfere with reflective paint or coloring on the barricades. Barricade signs shall be in accordance with Figure 30, except that they shall be 1'-0" by 2'-0" in size. The information box shall have the following information: For Questions on this Project Call: (817)871-8306 M -F 7:30 am to 4:30 p.m. or (817)871-8300 Nights and Weekends Any and all cost for the required materials, labor, and equipment necessary for the furnishing of Project Signs shall be considered as a subsidiary cost of the project and no additional compensation will be allowed. D-44 CONCRETE SIDEWALK AND DRIVEWAY REPLACEMENT: At locations in the project where mains are required to be placed under existing sidewalks and/or driveways, such sidewalks and/or driveways shall be completely replaced for the full existing width, between existing construction or expansion joints with 3000 psi concrete with reinforcing steel on a sand cushion in accordance with City of Fort Worth Transportation/Public Works Department Standard Specifications for Construction, Item 504. At locations where mains are required to be placed under existing curb and gutter, such curb and gutter shall be replaced to match type and geometry of the removed curb and gutter shall be installed in accordance with City of Fort Worth Public Works Department Standard Specification for Construction, Item 502. Payment for cutting, backfill, concrete, forming materials and all other associated appurtenances required, shall be included in the square yard price of the bid item for concrete sidewalk or driveway repair. D.45 MISCELLANEOUS PLACEMENT OF MATERIAL: Material has been allocated under various bid items in the Proposal to establish unit prices for miscellaneous placement of material. These materials shall be used only when directed by the Engineer, depending on field conditions. Payment for miscellaneous placement of material will be made for only that amount of material used, measured to the nearest one -tenth unit. Payment for miscellaneous placement of material shall be in accordance with the General Contract Documents regardless of the actual amount used for the project. D-46 TYPE "C" BACKFILL: Excavated material used for Type "C" backfill must be mechanically compacted unless the Contractor can furnish the Engineer with satisfactory evidence the P.I. of the excavated material is less then 8.* Such evidence shall be a test report from an independent testing laboratory and must include representative samples of soils in all involved areas, with a map showing the location and depth of the various test holes. 04/21/99 SC -22 0 PART D - SPECIAL CONDITIONS If excavated material is obviously granular in nature, containing little or no plastic material, the Engineer may waive the test report requirement. aSee E-1.24, Type "C" Backfill, and E2.11 Trench Backfill.** * Revised 3/20/81 9 ** Revised 4/20/81 D-47 CRUSHED LIMESTONE BACKFILL: Where specified on the plans or directed by the 9 Engineer, Crushed Limestone shall be used for trench backfill on this project. The material shall conform to Public Works Standard Specifications for Street and Storm Drain Construction Division 2 Item 208.2 - Materials and Division 2 Item 208.3 - Materials Sources. Trench backfill IJ and compaction shall meet the requirements of E2-2 Excavation and Backfill, Construction Specifications, General Contract Documents. fl Payment for crushed limestone backfill in place shall be made at the unit price bid in the Proposal Li multiplied by the quantity of material used measured in accordance with E2-2.16 Measurement of Backfill Materials, Construction Specifications, General Contract Documents. D-48 2:27 CONCRETE: Transportation and Public Works Department typical sections for Pavement and Trench Repair for Utility Cuts Figures 1 through 5 refer to using 2:27 Concrete as fl base repair. Since this call -out includes the word "concrete", the consistent interpretation of the Li Transportation and Public Works Department is that this ratio specifies two (2) sacks of cement per cubic yard of concrete. D-49 TRENCH EXCAVATION, BACKFILL, AND COMPACTION: Trench excavation and backfill under parking lots, driveways, grayel surfaced roads, within easements, and ' within Q existing or future R.O.W. shall be in accordance with Section E1-2 Backfill and E2-2 Excavation and Backfill of the General Contract Documents and Specifications except as specified herein. ri A. TRENCH EXCAVATION: In accordance with'Section E2-2 Excavation and Backfill, if the stated maximum trench widths are exceeded, either through accident or otherwise, and if the Engineer determines that the design loading of the pipe will be exceeded, the Contractor will o be required to support the pipe with an improved trench bottom. The expense of such remedial measures shall be entirely the Contractor's own. All trenching operations shall be confined to the width of permanent rights -of -way, permanent easements, and any temporary construction easements. All excavation shall be in strict compliance with the Trench Safety 0 Systems Special Condition of this document. B. TRENCH BACKFILL: Trenches which lie outside of existing or future pavement shall be Q backfilled above the top of the embedment material with Type "C" backfill material. Excavated material used for Type "C" backfill must be mechanically compacted unless the Contractor can furnish the Engineer with satisfactory evidence that the P.I. of the excavated material is less than 8. Such evidence shall be a test report from an independent testing laboratory and must include representative samples of soils in all involved areas, with a map showing the location and depth of the various test holes. If excavated material is obviously 9 granular in nature, containing little or no plastic material, the Engineer may waive the test report requirement. See E1-2.3, Type "C" or "D" Backfill, and E2-2.11 Trench Backfill for additional requirements. When Type "C" backfill material is not suitable, at the direction of the 04/21/99 SC -23 a PART D - SPECIAL CONDITIONS "B" Engineer, Type backfill material shall be used. In general, all backfill material for trenches in existing paved streets shall be in accordance with Figure(s) A, B, C, or D. Sand material specified in Figure(s) A -D shall be obtained from an approved source and shall consist of durable particles free of thin or elongated pieces, lumps of clay, soil, loam or vegetable matter and shall meet the following gradation: Sieve Size % Retained #4 0-5 #16 0-20 #50 0-50 #100 60-95 #200 90-100 a (P.I. = 8 br less) 'Backfill. C. TRENCH COMPACTION: All trench backfill shall be placed in lifts per E2-2.9 Trenches which lie outside existing or future pavements shall be compacted to a minimum of 90% Standard Proctor Density (A.S.T.M. D698) by means of tamping only. Trenches which lie under existing or future pavement shall be backfilled per Figure A with 95% Standard Proctor Density by jetting, mechanical tamping, or a combination df methods. Backfill material to be mechanically tamped must be within +-4% of its optimum moisture content. The top two (2) feet of sewer line trenches and the top eighteen (18) inches of water line may be rolled in with heavy equipment tires, provided it is placed in lifts appropriate to the material being used and the operation can be performed without damage to the installed pipe. The City, at its own expense, will perform trench compaction tests per A.S.T.M. standards on all trench backfill. Any retesting required as a result of failure to compact the backfill material to meet the standards will be at the expense of the Contractor and will be billed at the commercial rates as determined by the City. These soil density tests shall be performed at two (2) foot vertical intervals beginning at a level two (2) feet above the top of the installed pipe and continuing to the top of the completed backfill at intervals along the trench not to exceed 300 linear feet. The Contractor will be responsible for providing access and trench safety system to the level of trench backfill to be tested. No extra compensation will be allowed for exposing the backfill layer to be tested or providing trench safety system for tests conducted by the City. D. MEASUREMENT AND PAYMENT: All material, including any and all Type "B" backfill, and labor costs of excavation and backfill will be included in the price bid per linear foot of water and sewer pipe. a D-50 PAVEMENT REPAIR (E2-19): The unit price bid under the appropriate bid "item of the proposal shall cover all cost for providing pavement repair equal to or superior in composition, a thickness, etc., to existing pavement as detailed in the Public Works Department typical sections for Pavement and Trench Repair for Utility Cuts, Figures 1 through 5. . a 04/21/99 SC -24 a 0 PART D - SPECIAL CONDITIONS 0 All required paving cuts shall be made with a concrete saw in a true and straight line on both fl sides of the trench, a minimum of twelve (12) inches outside the trench walls. The trench shall be backfilled and the top nine (9) inches shall be filled, with required materials as shown on paving details, compacted and level with the finished street surface. This finished grade shall be a maintained in a serviceable condition until the paving has been replaced. All residential driveways shall be accessible at night and over weekends. fl It has been determined by the Transportation and Public Works Department that the strip of existing HMAC pavement between the existing gutter and the edge of the trench pavement repair will not hold up if such strip of existing pavement is two (2) feet or less in width. Therefore, at the locations in the project where the trench wall is three (3) feet or less from the lip of the existing gutter, the Contractor shall be required to remove the existing paving to such gutter. The pavement repair shall then be made from a minimum distance of twelve (12) inches outside the trench wall nearest the center of the street to the gutter line. The pavement shall be replaced within a maximum of five (5) working days, providing job placement conditions will permit repaving. If paving conditions are not suitable for repaving, in the opinion of the Owner, the repaving shall be done at the earliest possible date. DA permit must be obtained from the Department of Engineering Construction Services Section by the Contractor in conformance with Ordinance No. 3449 and/or Ordinance No. 792 to make utility u cuts in the street. The Department of Engineering will inspect the paving repair after construction. This permit requirement may be waived if work is being done under a Performance Bond and inspected by the Department of Engineering. QD-51 TRENCH SAFETY SYSTEM FOR WATER DEPARTMENT PROJECTS ONLY: A. GENERAL: This specification covers the trench safety requirements for all trench excavations exceeding depth of five (5) feet in order to protect workers from cave-ins. The requirements of this item govern all trenches for mains, manholes, vaults, service lines, and all other appurtenances. The design for the trench safety shall be signed and sealed by a Registered Professional Engineer licensed in Texas. B. STANDARDS: The latest version of the U.S. Department of Labor, Occupational Safety and � . Health Administration Standards, 29 CFR Part 1926, Sub -Part P - Excavations, are hereby made a part of this specification and shall be the minimum governing requirements for trench safety. 0 C. DEFINITIONS: fl 1. TRENCHES - A trench is referred to as a narrow excavation made below the surface of the ground in which the depth is greater than the width, where the width measured at the bottom is not greater than fifteen (15) feet. Q2. BENCHING SYSTEM - Benching means excavating the sides of a trench to form one or a series of horizontal level or steps, usually with vertical or near -vertical surfaces between alevels. 04/21/99 SC -25 PART D - SPECIAL CONDITIONS 3. SLOPING SYSTEM - Sloping means excavating to form sides of a trench that are inclined away from the excavation. 4. SHIELD SYSTEM - Shields used in trenches are generally referred to as "trench boxes" or "trench shields". Shield means a structure that is able to withstand the forces imposed on it by a cave-in and protect workers within the structure. Shields can be permanent structures or can be designed to be portable and move along as the work progresses. Shields can be either pre -manufactured or job -built in accordance with OSHA standards. 5. SHORING SYSTEM - Shoring means a structure such as a metal hydraulic, mechanical or timer system that supports the sides of a trench and which is designed to prevent cave- ins. Shoring systems are generally comprised of cross -braces, vertical rails, (uprights), horizontal rails (wales) and/or sheeting. D. MEASUREMENT - Trench depth is the vertical measurement from the top of the existing ground to the bottom of the pipe or structures. The quantity of trench safety systems shall be based on the linear foot amount of trench depth greater than five (5) feet. E. PAYMENT - Payment shall be full compensation for safety system design, labor, tools, materials, equipment and incidentals necessary for the installation and removal of trench safety systems. D-52 SANITARY SEWER MANHOLES: A. GENERAL: The installation, replacement, and/or rehabilitation of sanitary sewer manholes will be required as shown on the plans, and/or as described in these Special Contract Documents in addition to those located in the field and identified by the Engineer. All manholes shall be in accordance with sections E1-14 Materials for Sanitary Sewer Manholes, Valve Vaults, Etc., and E2-14 Vault and Manhole Construction of the General Contract Documents and Specifications, unless amended or superseded by requirements of this Special Condition. 1. CONCRETE COLLARS: Concrete collars will be required on all manholes specified as per Figure 121. 2. WATERTIGHT MANHOLE INSERTS: Watertight gasketed manhole inserts shall be installed in all sanitary sewer manholes. Inserts shall be constructed in accordance with Fort Worth Water Department Standard El 00-4 and shall be fitted and installed according to the manufacturer's recommendations. Stainless Steel manhole inserts shall be required for all pipe diameters 18" and greater. 3. LIFT HOLES: All lift holes shall be plugged with a pre -cast concrete plug. The lift hole shall be sealed on the outside of the manhole with Ram-Nek or an approved equal sealant. The lift hole shall be sealed on the inside of the manhole with quick setting cement grout. 4. FINAL RIM ELEVATIONS: Manhole rims in parkways, lawns and other improved lands shall be at an elevation not more than one (1) nor less than one-half (1/2) inch above the surrounding ground. Backfill shall provide a uniform slope from the top of manhole 04/21/99 SC -26 0 ci PART D - SPECIAL CONDITIONS a 0 is I 0 Ii 'J Ii 0 Q 0 a 0 I 0 0 0 0 casting for not less than three (3) feet each direction to existing finish grade of the ground. The grade of all surfaces shall be checked for proper slope and grade by string lining the entire area regarded near the manhole. Manholes in open fields, unimproved land, or drainage courses shall be at an elevation shown on the drawings or minimum of 6 inches above grade. 5. MANHOLE COVERS: All lids shall have pick slots in lieu of pick .holes. Manhole frames and covers shall be McKinley, Type N, with indented top design, or equal, with pick slots. Covers shall set flush with the rim of the frame and shall have no larger than 1/8 inch gap between the frame and cover. Bearing surfaces shall be machine finished. Locking manhole lids and frames will be restricted to locations within the 100 -year floodplain and areas specifically designated on the plans. Certainteed Ductile Iron Manhole Lids and Frames are acceptable for use where locking lids are specified. 6. 'SHALLOW CONE MANHOLES: Shallow manhole construction will be used when manhole depth is four (4) feet or less. All shallow cone manholes shall be built in accordance with Figure 105. All shallow cone manholes shall have a cast iron lid and frame with pick slots. NOTE: MANHOLES PER FIGURE 106 WILL NOT BE ALLOWED. 7. MANHOLE STEPS: No manhole steps are to be installed on any sanitary sewer manhole. 8. EXTERIOR SURFACE COATING: Exterior surfaces of all manholes shall be coated with two mop coats of coal tar epoxy, Koppers "Bitumastic Super Service Black" Tnemec "46- 450 Heavy Tnemecol," or equal to, a minimum or 14 mils dry film thickness. 9. MANHOLE JOINT SEALING: All interior and/or exterior joints on concrete manhole sections constructed for the City of Fort Worth Water Department, excluding only the joints using a trapped type performed O-ring rubber gasket shall require Bitumastic joint sealants as per Figure M. This sealant shall be pre -formed and trowelable Bitumastic as manufactured by Kent - Seal, Ram-Nek, E -Z Stick, or equal. The joint sealer shall be supplied in either extruded pipe form or suitable cross-sectional area or flat -tape and shall be sized as recommended by the manufacturer and approved by the Engineer. The joint sealer shall be protected by a suitable removable wrapper and shall not in any way depend on oxidation, evaporation, or any other chemical action for either its adhesive properties or cohesive strength. The Joint sealer shall remain totally flexible without shrinking, hardening, or oxidizing regardless of the length of time it is exposed to the elements. The manufacturer shall furnish an affidavit attesting to the successful use of the product as a pre -formed flexible joint sealant on concrete pipe and manhole sections for a period of at least five years. B. EXECUTION: 1. INSTALLATION OF JOINT SEALANT: Each grade adjustment ring and manhole frame shall be sealed with the above specified materials. All surfaces to be in contact with the joint sealant shall be thoroughly cleaned of dirt, sand, mud, or other foreign matter. A primer shall be applied to all surfaces prior to installing the joint sealant in accordance with the recommendations by the manufacturer. - The protective wrapper shall remain on the D04/21/99 SC -27 0 PART D - SPECIAL,. CONDITIONS joint sealant until immediately prior to the placement of the pipe in the trench. After removal of the protective wrapper, the joint sealant shall be kept clean. Install frames and cover over manhole opening with the bottom of the rings .resting on Bitumastic joint sealer. Frames and grade rings shall rest on two (2) rows (inside and outside) of Bitumastic]oint sealer. 2. SEALING AND/OR ADJUSTING EXISTING MANHOLES: Excavate (rectangular full depth saw cut if in pavement) adjacent to the manhole to expose the entire manhole frame and a minimum of 6 inches of the manhole wall keeping the sides of the trench nearly vertical. Remove manhole frame from the manhole structure and observe the condition of the frame and grade rings. Any frame or grade ring that is not suitable for use as determined by the Engineer shall be replaced. Grade rings that are constructed of brick, block materials other than pre -cast concrete rings, or where necessary and approved by the Engineer, shall be replaced with a pre -cast flattop section. Pre -cast concrete rings, or a pre -cast concrete flattop section will be the only adjustments allowed. In. brick or block manholes, replace the upper portion of the manhole to a point 24 inches Q below the frame. If the walls or cone section below this level are structurally unsound, notify the Engineer prior to replacement of the grade rings and manhole frame. Existing brickwork, if damaged by the Contractor, shall be replaced at the Contractor's expense. Wire brush manhole frame and exposed manhole surfaces to remove dirt and loose debris. Coat exposed manhole surfaces with an approved bonding agent followed by an application of a quick setting hydraulic cement to provide a smooth working surface. If the inside diameter of the manhole is too large to safely support new adjustment rings or 0 frames, a flat top section shall be installed. Joint surfaces between the frames, adjustment rings, and cone section shall be free of dirt, stones, debris and voids to 'ensure a watertight seal. Place flexible gasket joint ��JJ material along the inside and outside edge of each joint, or use trowelable material in lieu of pre -formed gasket material. Position the butt joint of each length of joint material on {� opposite sides. of the manhole. No steel shims, wood, stones, or any material not specifically accepted by the Engineer may be used to obtain final surface elevation of the manhole frame. Q In paved areas or future paved areas, castings shall be installed by using a straight edge not less than ten (10) feet long so that the top of the casting will conform to the slope and finish elevation of the paved surface. The top of the casting shall be 1/8 inch below the finished elevation. Allowances for the compression of the joint material shall be made to assure a proper final grade elevation. 3. EXPOSED EXTERIOR SURFACES: All exposed exterior. surfaces shall be coated with two mop coats of coal tar epoxy. Kopper "Bitumastic Super Service Black"; Tnemec "46- 450 Heavy Tnemecol", or equal, to a minimum of 14 mils dry film thickness. D 04/21/99 SC -28 0 PART D - SPECIAL CONDITIONS 4. The exterior surface of all pre -cast section joints shall be thoroughly cleaned with a wire brush and then waterproofed with a 1/2 -inch thick coat of trowelable bitumastic joint sealant from 6 -inches below to 6 -inches above the joint. The coated joint shall then be wrapped with 6 mil plastic to protect the sealant from damage during backfilling. C. MEASUREMENT AND PAYMENT: The price bid for new manhole installations shall include all labor, equipment, and materials necessary for construction of the manhole including, but not limited to, joint sealing, lift hole sealing and exterior surface coating and pavement repair. The. price bid for reconstruction of existing manholes shall include all labor equipment and materials necessary for construction of new manhole, including, but not limited to, excavation, backfill, disposal of materials, joint sealing, lift hole sealing, exterior surface coating and pavement repair. The price bid for adjusting and/or sealing of existing manholes shall include all labor, equipment and materials necessary for adjusting and/or sealing the manhole, including but not limited to, joint sealing, Iifthole sealing, and exterior surface coating. Payment for concrete collars will be made per each. Payment for manhole inserts will be made per each. D-53 SANITARY SEWER SERVICES: Any reconnection, relocation, re-routes, replacement, or new sanitary sewer service shall be required as shown on the plans, and/or as described in these Special Contact Documents in addition to those located in the field and identified by the Engineer as active sewer taps. The service connections shall be constructed by the Contractor utilizing standard factory manufactured tees. City approved factory manufactured saddle taps may be used, but only as directed by the Engineer. The decision to use saddle taps as opposed to tees shall be made on a case by case basis. The Contractor shall be responsible for coordinating the scheduling of tapping crews with building owners and the Engineer in order that the work be performed in an expeditious manner. A minimum of 24 hours advance notice shall be given when taps will be required. Severed service connections shall be maintained as specified in section C6-6.1 5. A. SEWER SERVICE RECONNECTION: When sewer service reconnection is called for the Contractor shall vertically adjust the existing sewer service line as required for reconnection and furnish a new tap. The fittings used for vertical adjustment shall consist of a maximum bend of 45 degrees. The tap shall be located so as to line up with the service line and avoid any horizontal adjustment. For open cut applications, all sanitary sewer service lines shall be replaced to the property or easement line, or as directed by the Engineer. Sanitary sewer services on sewers being rehabilitated using pipe enlargement methods shall be replaced to the property or easement line or as directed by the Engineer. Procedures listed below for Sewer Service Replacement shall be adhered to for the installation of any sewer service line including the incidental four (4) feet of service line which is included in the price bid for Sanitary Sewer Taps. Payment for work such as backfill, saddles, tees, fittings incidental four (4) feet of service Tine and all other associated appurtenances required shall be included in the price bid for Sanitary Sewer Taps. B. SEWER SERVICE REPLACEMENT: All building sewer services encountered during construction shall be adjusted and/or replaced by the Contractor as directed by the Engineer 04/21/99 SC -29 PART D - SPECIAL CONDITIONS as required for the connection of the sewer service line. If the sewer service line is in such condition or adjustment necessitates the replacement of the sewer service line, all work shall be performed by a licensed plumber. The length of the replacement shall be determined by the Engineer. All sewer services shall be installed at a minimum of two (2) percent slope or as approved by the Engineer. Connection to the existing sewer service line shall be made with appropriate adapter fitting. The fitting shall be a urethane or neoprene coupling A.S.T.M. C-425 with series 300 stainless steel compression straps. Payment for work and materials such as backfill, pipe fittings, surface restoration on private property (to match existing), and all other associated work for service replacements in excess of four (4) linear feet shall be included in the linear foot price bid for sanitary sewer service line replacement. Payment for all work and material involving the "tap" shall be included in the price bid for sanitary sewer service taps. D-54 NOT USED D-55 REMOVAL, SALVAGE, AND ABANDONMENT OF EXISTING FACILITIES: Any removal, salvaging and/or abandonment of existing facilities will necessarily be required as shown on the plans, and/or described in these Special Contract Documents in addition to those located in the field and identified by the Engineer. This work shall be done in accordance with Section E2-1.5 Salvaging of Material and E2-2.7 Removing Pipe, of the General Contract Documents and Specifications, unless amended or superseded by requirements of this Special Condition. A. SALVAGE OF EXISTING WATER METER AND METER BOX: Existing water meter and meter box shall be removed and returned to the Water Department warehouse by the Contractor in accordance with Section E2-1.5 Salvaging of Materials. B. SALVAGE OF EXISTING WATER METER AND CONCRETE VAULT LID: Existing water meter and concrete vault lid shall be removed and returned to the Water Department warehouse by the Contractor in accordance with Section E2-1.5 Salvaging of Materials. The concrete vault shall be- demolished in place to a point not less than 18 inches below final grade. The concrete vault shall then be backfilled and compacted in accordance with backfill method as specified in Section E2-2.9 Backfill. Backfill material shall be suitable excavated material approved by the Engineer. Surface. restoration shall be compatible with existing surrounding surface and grade. C. SALVAGE OF EXISTING FIRE HYDRANTS: Existing fire hydrants shall be removed and returned to the Water Department warehouse by the Contractor in accordance with Section E2-1.5 Salvaging of Materials. The void shall be backfilled and compacted in accordance with backfill method as specified in Section E2-2.9 Backfill. Backfill material shall be suitable excavated material approved by the Engineer. Surface restoration shall be compatible with existing surrounding surface and grade. D. SALVAGE OF EXISTING GATE VALVE: Existing gate valve and valve box and lid shall be removed and returned to the Water Department warehouse by the Contractor in accordance with Section E2-1.5 Salvaging of Materials. The void area caused by the valve removal shall be backfilled and compacted in accordance with backfill method as specified in Section E2-2.9 Backfill. Backfill material shall be suitable excavated material approved by the Engineer. Surface' restoration shall be compatible with existing surrounding surface and 04/21/99 SC -30 U PART D - SPECIAL CONDITIONS agrade. If the valve is in a concrete vault, the vault shall be demolished in place to a point no less than 18" below final grade. E. ABANDONMENT OF EXISTING GATE VALVE: Existing gate valve and box lid shall be abandoned by first closing the valve to the fully closed position and demolishing the valve box fl in place to a point not less than 18 inches below final grade. Concrete shall then be used as Li backfill material to match existing grade. fl F. ABANDONMENT OF EXISTING VAULTS: Vaults to be demolished in place shall have top slab and lid removed and vault walls demolished to a point not less than 18" below final grade. The void area caused shall then be backfilled • and compacted in accordance with fl backfill method as specified in Section E2-2.9 Backfill. Backfill material shall be suitable excavated material approved by the Engineer. Surface restoration shall be compatible with the existing surrounding grade. 9 G. ABANDONMENT OF MANHOLES: Manholes to be abandoned in place shall have all pipes entering or exiting the structure plugged with lean concrete. Manhole top or cone section shall be removed to the top of the full barrel diameter section, or to point not less than 18 inches below final grade. The structure shall then be backfilled and compacted in accordance with backfill method as specified in Section E2-2.9 Backfill. Backfill material may be either clean washed sand of clean, suitable excavated material approved by the Engineer. Surface restoration shall be compatible with surrounding service surface. Payment for work involved in backfilling, plugging of pipe(s) and all other appurtenances required, shall be included in the appropriate bid item - Abandon Existing Sewer Manhole. H. REMOVAL OF MANHOLES: Manholes to be removed shall have all pipes entering or exitingri . the structure disconnected. The complete manhole, including top or cone section, all full barrel diameter section, and base section shall be removed. The excavation shall then be backfilled and compacted in accordance with backfill method as specified in Section E2-2.9 Backfill. Backfill material may be with Type C Backfill or Type B Backfill, as approved by the Engineer. Surface restoration shall be compatible with surrounding surface. I. CUTTING AND PLUGGING EXISTING MAINS: At various locations on this project, it may be p required to cut, plug, and block existing water mairis/services or sanitary sewer mains/services in order to abandon these lines. Cutting and plugging existing mains and/or services shall be considered as incidbntal and all costs incurred will be considered to be 9 included in the linear foot bid price of tije pipe, unless separate trenching is required. I J. REMOVAL OF EXISTING PIPE: Where removal of the existing pipe is required, it shall be afl the Contractor's responsibility to properly dispose of all removed pipe. All removed valves, fire hydrants and meter boxes shall) be delivered to Water Department Field Operation, Storage Yard. K. PAYMENT: Payment for all work and material involved in salvaging, abandoning and/or removing existing facilities shall be included in the linear foot bid price of the pipe, except as fl follows: separate payment will be made for removal of all, fire hydrants, gate valves, 16 inch and larger, and sanitary sewer manholes, regardless of location. 0 9 04121199 SC -31 PART D - SPECIAL CONDITIONS Payment will be made for salvaging, abandoning and/or removing all other existing facilities when said facility is not being replaced in the same trench (i.e., when removal requires a separate trench). D-56 DETECTABLE WARNING TAPES: Detectable underground utility warning tapes which can be located from the- surface by a pipe detector 'shall be installed directly above non-metallic water and sanitary sewer pipe. The detectable tape shall be "Detect Tape" manufactured by Allen Systems, Inc. or approved equal, and shall consist of a minimum thickness 0.35 mils solid aluminum foil encased in a protective inert plastic jacket that is impervious to all known alkalis, acids, chemical reagents and solvents found in the soil. The minimum overall thickness of the tape shall be 5.5 mils, and the width shall not be less than two inches with a minimum unit weight of 2%2 pounds/1 inch/100'. The tape shall be color coded and imprinted with the message as follows: Type of Utility Color Code Water Safety Blue 'Sewer Safety Green Legends Caution! Buried Water Line Below Caution! Buried Sewer Line Below Installation of detectable tapes shall be per manufacturer's recommendations and shall be as close to the grade as is practical for optimum protection and detectability. Allow a minimum of 18 inches between the tapeand the pipe. Payment for work such as backfill, bedding, blocking, detectable tapes, and all other associated appurtenances required shall be included in the unit price bid for the appropriate bid item(s). D-57 PIPE CLEANING: Joints shall be wiped and then inspected for proper installation by the inspectors. Each joint shall be swept daily and kept clean during installation. A temporary night plug shall be installed on all exposed pipe ends during any period of work stoppage. D-58 BARRICADES, WARNINGS, AND FLAGMEN: Reference Part C - General Conditions, Section C6-6.8 Barricades, Warnings, and Watchmen: A. Wherever the word Watchmen appears in this paragraph, it shall be changed to the word Flagmen. B. In the first paragraph, lines five (5) and six (6), change the phrase "take all such other precautionary measures" to "take all reasonable necessary measures". D-59 DISPOSAL OF SPOIL/FILL MATERIAL: Prior to the disposing of any spoil/fill material, the Contractor shall advise the Director of Engineering Department, acting as the City of Fort Worth's Flood Plain Administrator ("Administrator"), of the location of all sites where the Contractor intends to dispose of such material. Contractor shall not dispose of such material until the proposed sites have been determined by the Administrator to meet the requirements of the Flood Plain Ordinances of the City of Fort Worth (Ordinance No. 10056). All disposal sites must be approved by the Administrator to ensure that filling is not occurring within a floodplain without a permit. A floodplain permit can be issued upon approval of necessary Engineering studies. No fill permit is required if disposal sites are not in a floodplain. Approval of the Contractor's disposal sites shall be evidenced by a letter signed by the Administrator stating that the site is not in a 04/21/99 SC -32 I PART D - SPECIAL CONDITIONS 0 I I C known flood plain or by a Flood Plain Fill Permit authorizing fill within the flood plain. Any expenses associated with obtaining the fill permit, including any necessary Engineering studies, shall be at the Contractor's expense. In the event that the Contractor disposes of spoil/fill material at a site without a fill permit or a letter from the administrator approving the disposal site, upon notification by the Director of Engineering Department, Contractor shall remove the spoil/fill material at its expense and dispose of such materials in accordance with the Ordinances of the City and this section. D-60 MECHANICS AND MATERIALMEN'S LIEN: The Contractor shall be required to execute a release of mechanics and materialmen's liens upon receipt of payment. Q D-61 SUBSTITUTIONS: Tile specifications for materials set out the minimum standard of quality which the City believes necessary to procure a satisfactory project. No substitutions will be permitted until the Contractor has received written permission of the Engineer to make a Q substitution for the material which has been specified. Where the term "or equal", or "or approved equal" is used, it is understood that if a material, product, or piece of equipment bearing the name so used is furnished, it will be approvable, as the particular trade name was used for the purpose of establishing a standard of quality acceptable to the City. If a product of any other name is proposed for use, the Engineer's approval thereof must be obtained before the proposed substitute is procured by the Contractor. Where the term "or equal", or "or approved equal" is not used in the specifications, this does not necessarily exclude alternative items or material or equipment which may accomplish the intended purpose. However, the Contractor shall have the full responsibility of proving that the proposed. substitution is, in fact, equal, and the Engineer, as the representative of the City, shall be the sole judge of the acceptability of substitutions. The provisions of this sub -section as related to "substitutions" shall be applicable to all sections of these specifications. D-62 PRE -CONSTRUCTION TELEVISION INSPECTION OF SANITARY SEWER A. GENERAL: Prior to the reconstruction, ALL sections of existing sanitary sewer lines to be abandoned, removed (except where being replaced in the same location), or rehabilitated (pipe enlargement, cured -in -place pipe, fold and form pipe, slip -line, etc.), shall be cleaned, and a television inspection performed to identify any active sewer service taps, other sewer laterals and their location. Work shall consist of furnishing all labor, material, and equipment necessary for the cleaning and inspection of the sewer lines by means of closed circuit television. Satisfactory precautions shall be taken to protect the sewer lines from damage that might be inflicted by the improper use of cleaning equipment. 1. HIGH VELOCITY JET (HYDROCLEANING) EQUIPMENT: The •high -velocity sewer line fl cleaning equipment shall be constructed for easy and safe operation. The equipment U shall also have a selection of two or more high -velocity nozzles. The nozzles shall be capable of producing a scouring action from 15 to 45 degrees in all size lines designated fl to be cleaned. Equipment shall also include a high -velocity gun for washing and scouring LI manhole walls and floor. The gun shall be capable of producing flows from a fine spray to a solid stream. The equipment shall carry its own water tank, auxiliary engines, pumps, Qand hydraulically driven hose reel. Hydraulically Propelled Equipment shall be of a movable dam type and be constructed in .9 such a way that a portion of the dam may be collapsed at any time during the cleaning 04,121199 SC -33 PART D - SPECIAL CONDITIONS operation to protect against flooding of the sewer. The movable dam shall be equal in diameter around the outer periphery to ensure removal of grease. If sewer cleaning balls or other equipment which cannot be collapsed is used, special precautions to prevent flooding of the sewers and public or private property shall be taken. The flow of sewage present in the sewer lines shall be utilized to provide necessary fluid for hydraulic cleaning devices whenever possible. 2. CLEANING PROCEDURES: The designated sewer manholes shall be cleaned using high-velocityjet equipment. The equipment shall be capable of removing dirt, grease, rocks, sand, and other materials and obstructions from the sewer lines and manholes. If cleaning of an entire section cannot be successfully performed from one manhole, the equipment shall be set up on the other manhole and cleaning again attempted. If, again, successful cleaning cannot be performed or equipment fails to traverse the entire manhole section, it will be assumed that a major blockage exists, and the cleaning effort shall be abandoned. When additional quantities of water from fire hydrants is necessary to avoid delay in normal working procedures, the water shall be conserved and not used unnecessarily. No fire hydrant shall be obstructed in case of a fire in the area served by the hydrant. Before using any water from the City Water Distribution System, the Contractor shall apply for and receive permission from the Water Department. The Contractor shall be responsible for the water meter and related charges for the setup, including the water usage bill. All expenses shall be considered incidental to cleaning. 3. DEBRIS REMOVAL AND DISPOSAL: All sludge, dirt, sand, rock, grease, and other solid or semisolid material resulting from the cleaning operation shall be removed at the downstream manhole of the section being cleaned. Passing material from manhole section to manhole section, which could cause line stoppages, accumulations of sand in wet wells, or damage pumping equipment, shall not be permitted. 4. All solids or semisolid resulting from the cleaning operations shall be removed from the site and disposed of at a site designated by the Engineer. All materials shall be removed from the site no less often than at the end of each workday and disposed of at no additional cost to the City. 5. UNDER NO CIRCUMSTANCE SHALL SEWAGE OR SOLIDS REMOVED THEREFROM BE DUMPED ONTO STREETS OR INTO DITCHES, CATCH BASINS, STORM DRAINS OR SANITARY SEWER MANHOLES. 6. TELEVISION INSPECTION EQUIPMENT: The television camera used for the inspection shall be one specifically designed and constructed for such inspection. Lighting for the camera shall be suitable to allow a clear picture of the entire periphery of the pipe. The camera shall be operative in 100% humidity conditions. The camera, television monitor, and other components of the video system shall be capable of producing picture quality to the satisfaction of the Engineer; and if unsatisfactory, equipment shall be removed and no payment will be made for an unsatisfactory inspection. B. EXECUTION: 1. TELEVISION INSPECTION: The camera shall be moved through the line in either direction at a moderate rate, stopping when necessary to permit proper documentation of 04/21/99 SC -34 L / PART D - SPECIAL CONDITIONS any sewer service taps. In no case will the television camera be pulled at a speed greater than 30 feet per minute. Manual winches, power winches, TV cable, and powered fl rewinds or other devices that do not obstruct the camera view or interfere with proper documentation shall be used to move the camera through the sewer line. When manually operated winches are used to pull the television camera through the line, fl telephones or other suitable means of communications shall be set up between the two manholes of the section being inspected to ensure good communications between members of the crew. The importance of accurate distance measurements is emphasized. All television inspection video tapes shall have a footage counter. Measurement for location of sewer Q service taps shall be above ground by means of meter device. Marking on the cable, or the like, which would require interpolation for depth of manhole, will not be allowed. Accuracy of the distance meter shall be checked by use of a walking meter, roll -a -tape, or other suitable device, and the accuracy shall be satisfactory to the Engineer. The City makes no guarantee that all of the sanitary sewers to be entered are clear for the passage of a camera. The methods used for securing passage of the camera are to be at the option of the Contractor. The cost of retrieving the Television camera, under all circumstances, when it becomes lodged during inspection, shall be .incidental to Television inspection. 2. DOCUMENTATION: Television Inspection Logs: Printed location records shall be kept by the Contractor and will clearly show the location in relation to an adjacent manhole of each sewer service taps observed during inspection. In addition, other points of significance such as locations of unusual conditions, roots, storm sewer connections, broken pipe, presence of scale and corrosion, and other discernible features will be recorded, and a copy of such records will be supplied to the City. 3. PHOTOGRAPHS: Instant developing, 35 mm, or other standard -size photographs of the p television picture of problems shall be taken by the Contractor upon request of the Engineer, as long as such photographing does not interfere with the Contractor's operations. LI 4. VIDEOTAPE RECORDINGS: The purpose of tape recording shall be to supply a visual and audio record of problem areas of the lines that may be replayed. Video :tape fl recording playback shall be at the same speed that it was recorded. The television tapes shall be furnished to the City for review immediately upon completion of the television inspection and may be retained a maximum of 30 calendar days. QEquipment shall be provided to the City by the Contractor for review of the tapes. Tapes will be returned to the Contractor upon completion of review by the Engineer. Tapes shall Q not be erased without the permission of the Engineer. I If the tapes are of such poor quality that the Engineer is unable to evaluate the condition of the sewer line or to locate service connections, the Contractor shall be required to re - televise and provide a good tape of he line at no additional cost to the City. If a good tape cannot be provided of such quality that can be reviewed by the Engineer, no payment for televising this portion s all be made. Also, no payment shall be made for 04/21/99 S PART D - SPECIAL CONDITIONS portions of lines not televised or portions where manholes cannot be negotiated with the television camera. THE TAPES SHALL BE SUBMITTED TO THE ENGINEER PRIOR TO CONSTRUCTION FOR REVIEW AND DETERMINATION OF SAGS. Upon completion of review of the tapes by the Engineer, the Contractor will be notified as to which sections of the sanitary sewer are to be corrected. Tapes will be returned to the Contractor upon completion of review by the Engineer. All costs associated with this work shall be incidental to unit prices bid for items under Television Inspection of the Proposal. C. PAYMENT OF CLEANING AND PRE -CONSTRUCTION TELEVISION INSPECTION OF SANITARY SEWERS: The cost for Pre -Construction Cleaning and Television Inspection of sanitary sewers shall be per linear foot of sewer actually televised. The Contractor shall provide the Engineer with tapes of a quality that the particular piece of sewer can be readily evaluated as to existing sewer conditions and for providing appropriate means for review of the tapes by the Engineer including collection and removal, transportation and disposal of sand and debris from the sewers to a legal dump site. Television inspection shall include necessary cleaning (hydraulic jet or mechanical cleaner) to provide video image required for line analysis. The primary purpose of cleaning, is for television inspection and rehabilitation; when a portion of a line is not or cannot be televised or rehabilitated, the cleaning of that portion of line shall be incidental and no payment shall be made. The City makes no guiarantee- that all of the sanitary sewers to be entered are clear for the passage of a camera. The methods used for securing passage of the camera are to be at the option of the Contractor, and the costs must be included in the bid pride for TV Inspections. The cost of retrieving the TV Camera, under all circumstances, when it becomes lodged during inspection, shall be incidental to TV Inspection. The item shall also include all costs of installing and maintaining any bypass pumping required to provide reliable, regular sewer service to the area residents. All bypass pumping shall be incidental to the project. D-63 VACUUM TESTING OF SANITARY SEWER MANHOLES A. GENERAL: This item shall govern the vacuum testing of all newly constructed sanitary sewer manholes. B. EXECUTION: TEST PROCEDURE: Manholes shall be tested with all connections in place. Lift holes shall be plugged, and all drop -connections and gas sealing connections shall be installed prior to testing. ' 04121199 SC -36 PART D - SPECIAL CONDITIONS The sewer lines entering the manhole shall be plugged and braced to prevent the plugs from being drawn into the manhole. The plugs shall be installed in the lines beyond the drop -connections, gas sealing connections, etc. The test head shall be placed inside the frame at, the top of the manhole and inflated in accordance with the manufacturer's recommendations. A vacuum of ten inches of mercury (10"Hg) shall be drawn and the vacuum pump will be turned off. With the valve closed, the level of vacuum shall be read after the required test time. The required test time shall be determined from the Table I below in accordance with ASTM C1244-93: Table I MINIMUM TIME REQUIRED FOR VACUUM DROP OF 1" Hg (1 Q"Hg - 9"Hg) (SEC) Depth of MH. 48 -Inch Dia. 60 -Inch Dia. (FT.) Manhole Manhole 0 to 16' 40 sec. 52 sec. 18' 45 sec. 59 sec. 20' 50 sec. 65 sec. 22' 55 sec. 72 sec. 24' 59 sec. 78 sec. 26' 64 sec. 85 sec. 28' 69 sec. 91 sec. 30' 74 sec. 98 sec. For Each 5 sec. 6 sec. Additional 2' 2. ACCEPTANCE: The manhole shall be considered acceptable, if the drop in the level of vacuum is less than one -inch of mercury (1" Hg) after the required test time. Any manhole which fails to pass the initial test must be repaired with a suitable material which conforms to the construction material of the manhole. The manhole shall be retested as described above until it has successfully passed the test. Following completion of a successful test, the manhole shall be restored to its normal condition, all temporary plugs shall be removed, all braces, equipment, and debris shall be removed and disposed of in a manner satisfactory to the Engineer. C. PAYMENT: Payment for vacuum testing of sanitary sewer manholes shall be paid at the contract price per each vacuum test. This price shall include all material, labor, equipment, and all incidentals, including all bypass pumping, required to complete the test as specified herein. D-64 BYPASS PUMPING: The Contractor shall bypass the sewage around the section or sections of sewer to be rehabilitated and/or replaced. The bypass shall be made by plugging existing upstream manhole and pumping the sewage into a downstream manhole or adjacent system or other method as may be approved by' the Engineer. The pump and bypass lines shall be of adequate capacity and size to handle the flow without sewage backup occurring to facilities connected to the sewer. Provisions shall be made at driveways and street crossings to permit safe vehicular travel without interrupting flow in the bypass system. Under no circumstances will 04121199 SC -37 a PART D - SPECIAL CONDITIONS the Contractor be permitted to discharge sewage into the trenches. Payment shall be incidental 9 9 Y to rehabilitation or replacement of the sewer line. D-65 POST -CONSTRUCTION TELEVISION INSPECTION OF SANITARY SEWER: A. GENERAL: After construction, ALL sections of sanitary sewer lines shall have a television inspection performed. Work shall consist of furnishing all labor, material, and equipment necessary for inspection of the sewer lines by means of closed circuit television. Satisfactory precautions shall be taken to protect the sewer lines from damage that might be inflicted by .� the improper use of cleaning equipment. B. TELEVISION INSPECTION EQUIPMENT: The television camera used for the inspection shall be one specifically designed and constructed for such inspection. Lighting for the camera shall be operative in 100% humidity conditions. The camera, television monitor; and other components of the video system shall be capable of producing picture quality to the satisfaction of the Engineer; and if unsatisfactory, equipment shall be removed and no payment will be made for an unsatisfactory inspection. C. EXECUTION: a TELEVISION INSPECTION: The camera shall be moved through the line in either direction at a moderate rate, stopping when necessary to permit proper documentation of any sewer service taps. In no case will the television camera be pulled at a speed greater than 30 feet per minute. Manual winches, power winches, TV cable, and powered rewinds or other devices that do not obstructthe camera view or interfere with proper documentation shall be used to move the camera through the sewer•line. When manually operated winches are used to pull the television camera through the line, 0 telephones or other suitable means of communications shall be set up between the two manholes of the section being inspected to ensure good communications between members of the crew. The importance of accurate distance measurements is emphasized. All television inspection video tapes shall have a footage counter. Measurement for location of sewer service taps shall be above ground by means of meter device. Marking on the cable, or the like, which would require interpolation for depth of manhole, will not be allowed. Accuracy of the distance meter shall be checked by use of a walking meter, roll -a -tape, or 0 other suitable device, and the accuracy shall be satisfactory to the Engineer. The City makes no guarantee that all of the sanitary sewers to be entered are clear for the passage of a camera. The methods used for securing passage of the camera are to be at the option of the Contractor. The cost or retrieving the Television camera, under all circumstances, when it becomes lodged during inspection, shall be incidental to Television rl inspection. Sanitary sewer mains must be laced with enough water to fill all low pints. The television inspection must be done immediately following the facing of the main with no water flow. If sewer is active, flow must be restricted to provide a clear image of sewer being inspected. 0 04121199 SC -38 0 0 PART D - SPECIAL CONDITIONS 0 0 ICI 0 0 0 a 0 0 ci I 0 2. DOCUMENTATION: Television Inspection Logs: Printed location records shall be kept by the Contractor and will clearly show the location in relation to an adjacent manhole of each sewer service tap observed during inspection. All television logs shall be referenced to stationing as shown on the plans. A copy of these television logs will be supplied to the City. 3. PHOTOGRAPHS: Instant developing, 35 mm, or other standard -size photographs of the television picture of problems shall be taken by the Contractor upon request of the Engineer, as long as such photographing does not interfere with the Contractor's operations. 4. VIDEOTAPE RECORDINGS: The purpose of tape recording shall be to supply a visual and audio record of problem areas of the lines that may be replayed. Video tape recording playback shall be at the same speed that it was recorded. The television tapes shall be furnished to the City for review immediately upon completion of the television inspection and may be retained a maximum of 30 calendar days. Equipment shall be provided to the City by the Contractor for review of the tapes. Tapes will be returned to the Contractor upon completion of review by the Engineer. Tapes shall not be erased without the permission of the Engineer. If the tapes are of such poor quality that the Engineer is unable to evaluate the condition of the sewer line or to locate service connections. the Contractor shall be required to re - televise and provide a good tape of the line at no additional cost to the City. If a good tape cannot be provided of such quality that can be reviewed by the Engineer, no payment for televising this portion shall be made. Also, no payment shall be made for portions of lines not televised or portions where manholes cannot be negotiated with the television camera. D. PAYMENT OF POST -CONSTRUCTION TELEVISION INSPECTION OF SANITARY SEWERS: The cost for post -construction Television Inspection of sanitary sewers shall be per linear foot of sewer televised. The Contractor shall provide the Engineer with tapes of a quality that the particular piece of sewer can be readily evaluated as to sewer conditions and for providing appropriate means for review of the tapes by the Engineer. Television inspection shall include necessary cleaning (hydraulic jet or mechanical cleaner) to provide video image required for line analysis. The quantity of TV inspection shall be measured as the total length of new pipe installed. All costs associated with this work shall be included in the appropriate bid item - Post -Construction Television Inspection. Q The item shall also include all costs of installing and maintaining required to provide reliable, regular sewer service to the area residents shall be incidental to the project. DD-66 SAMPLES AND QUALITY CONTROL TESTING: 0 0 any bypass pumping . All bypass pumping A. The Contractor shall furnish, at its own expense, certifications by a private laboratory for all materials proposed to be used on the project, including a mix design for any asphaltic and/or Portland cement concrete to be used, and gradation, analysis for sand and crushed stone to be used along with the name of the pit from which the material was taken. The contractor 04/21/99 SC -39 U PART D - SPECIAL CONDITIONS shall provide manufacturer's certifications for all manufactured items to be used in the project and will bear any expense related thereto. B. Tests of the design concrete mix shall be made by the contractor's laboratory at least nine days prior to the placing of concrete using the same aggregate, cement, and mortar which are to be used later in the concrete. The Contractor shall provide a certified copy of the test �. results to the City. C. Quality control testing of in -place material on this project will be performed by the city at its own expense. Any retesting required as a result of failure of the material to meet project specifications will be at the expense of the contractor and will be billed at commercial rates as determined by the City. The failure of the City to make any tests of materials shall in no way relieve the contractor of its responsibility to furnish materials and equipment conforming to the requirements of the contract. D. Not less than 24 hours notice shall be provided to the City by the Contractor for operations 0 requiring testing. The Contractor shall provide access and trench safety system (if required) for the site to be tested,and any work effort involved is deemed to be included in the unit price for the item being tested. E. The Contractor shall provide a copy of the trip ticket for each load of fill material delivered to the job site. The ticket shall specify the name of the pit supplying the fill material. D-67 TEMPORARY EROSION, SEDIMENT, AND WATER POLLUTION CONTROL: A. DESCRIPTION: This item shall consist of temporary soil erosion sediment and water pollution control measures deemed necessary by the Engineer for the duration of the contract. These control measures shall at no time be used as a substitute for the permanent control measures unless otherwise directed by the Engineer and they shall not include measures taken by the CONTRACTOR to control conditions created by his construction operations. The temporary measures shall include dikes, dams, berms, sediment basins, fiber mats, jute netting, temporary seeding, straw mulch, asphalt mulch, plastic liners, rubble liners, baled -hay retards, dikes, slope drains and other devices. B. CONSTRUCTION REQUIREMENTS: The Engineer has the authority to define erodible earth and the authority to limit the surface area of erodible -earth material exposed by preparing right-of-way, clearing and grubbing, the surface area of erodible -earth material exposed by excavation, borrow and to direct the CONTRACTOR to provide temporary pollution -control measures to prevent. contamination of adjacent streams, other water courses, lakes, ponds or other areas of water impoundment. Such work may involve the construction of temporary berms, dikes, dams, sediment basins, slope drains and use of temporary mulches, mats, seeding, or other control devices or methods directed by the Engineer as necessary to control soil erosion. Temporary pollution -control measures shall be used to prevent or correct erosion that may develop during construction prior to installation of permanent pollution control features, but are not associated with permanent control features on the project. The Engineer will limit the area of preparing right-of-way, clearing and grubbing, excavation and borrow to be proportional to the CONTRACTOR'S capability and progress in keeping the finish grading, mulching, seeding, and other such permanent pollution -control measures current in accordance with the accepted schedule. Should seasonal conditions make such 04/21/99 SC -40 U PART D - SPECIAL CONDITIONS 0 limitations unrealistic, temporary soil -erosion -control measures shall be performed as directed P rY by the Engineer. fl 1. Waste or disposal areas and construction roads shall be located and constructed in a manner that will minimize the amount of sediment entering streams. fl Q 2. When work areas or material sources are located in or adjacent to live streams, such areas shall be separated from the stream by a dike or other barrier to keep sediment from entering a flowing stream. Care shall be taken during the construction and removal of such barriers to minimize the muddying of a stream. 3. All waterways shall be cleared as soon 2s practicable of false work, piling, debris or other obstructions placed during construction operations that are not a part of the finished work. 4. The Contractor shall take sufficient precautions to prevent pollution of streams, lakes and reservoirs with fuels, oils, bitumens, calcium chloride or other harmful materials. He shall conduct and schedule his operations so as to avoid or minimize siltation of streams, lakes and reservoirs and to avoid interference with movement of migratory fish. OC. MEASUREMENT AND PAYMENT: All work, materials and equipment necessary to provide temporary erosion control shall be considered subsidiary to the contract and no extra pay will 0 be given for this work. D-68 INGRESS AND EGRESS/OBSTRUCTION OF ACCESS TO DRIVES: The Contractor shall provide ingress and egress to the property being crossed by this construction and adjacent aproperty when construction is not in progress and at night. Drives shall be left accessible at night, on weekends, and during holidays. The Contractor shall conduct his activities to minimize obstruction of access to drives and property during the progress of construction. Notification shall 9 be made to an owner prior to his driveway being removed and/or rebuilt. D-69 PROTECTION OF TREES, PLANTS AND SOIL: All property along and adjacent to the 0 Contractors' operations including lawns, yards, shrubs, trees, etc., shall be preserved or restored after completion of the work, to a condition equal to or better than existed prior to start of work. Any trees or other landscape features scarred or damaged by the Contractor's operations shall a be restored or replaced at the Contractor's expense. Trimming or pruning to facilitate the work will be permitted only by experienced workmen in an approved manner (No trimming or pruning without the property owners' consent). Pruned limbs of 1" diameter or larger shall be thoroughly Qtreated as soon as possible with a tree wound dressing. D-70 SITE RESTORATION: The contractor shall be responsible for restoring the site to Q original grade and condition after completion of his operations subject to approval of the Engineer. The basis for approval by the Engineer will be grade restoration to plus minus one - tenth (0.1) of a foot. D-71 CITY OF FORT WORTH STANDARD PRODUCT LIST: Proposed products submitted in the bid documents must appear in the latest "City of Fort Worth Standard Product List, for the bid fl U to be considered responsive. Products and processes listed in the "City of Fort Worth Standard Product List, shall be considered to meet City of Fort Worth minimum technical requirements. 0 9 14/21/99 SC -41 ICI PART D - SPECIAL CONDITIONS D-72 STATE REVOLVING FUND (SRF) REQUIREMENTS: This project, in addition to standard P City of Fort Worth requirements, may involve certain State requirements. These requirements, if applicable, are provided in the following documents and should thoroughly be reviewed and completed by the contractor. They include: 1. At the Time of Contract Document Execution f� • ED -103 -Contractors Act of Assurance • ED -104 -Resolution Work required to conform to these requirements shall be considered subsidiary and no extra payment will be made. The SRF requirements are included in Appendix A. D-73 TOPSOIL, SODDING AND SEEDING: This item shall be performed in accordance with the City of Fort Worth Parks and Community Services Department Specifications for -topsoil, Sodding and Seeding. 1. TOPSOIL DESCRIPTION: This item will consist of furnishing and placing a minimum of six (6) inches of topsoil, free from rock and foreign material, in all parkways and medians to the lines and grades as established by the Engineer. CONSTRUCTION METHODS: Topsoil will be secured from borrow sources as required to supplement material secured from street excavation. All excavated materials from streets which is suitable for topsoil will be used in the parkways and medians before any topsoil is obtained, from a borrow source. Topsoil material secured from street excavation shall be stockpiled at locations approved by the Engineer, and at completion of grading and paving operations, topsoil shall be placed on parkway areas so as to provide a minimum six (6) inches of compacted depth of topsoil parkways. 2. SODDING DESCRIPTION: Sodding will consist of furnishing and planting Bermuda, Buffalo or St. Augustine grass in the areas between the curbs and walks, on terraces, in median strips, on embankments or cut slopes, or in such areas as designated on the Drawings and in accordance with the requirements of this Specification. Recommended Buffalo grass varieties for.sodding are Prairie and 609. MATERIALS: Sod shall consist of live and growing Bermuda, Buffalo or St. Augustine grass secured from sources where the soil is fertile. Sod to be placed during the dormant state of these grasses shall be alive and acceptable. Bermuda and Buffalo grass sod shall have a healthy, virile root system of dense, thickly matted roots throughout a two (2) inch minimum thickness of native soil attached to the roots. St. Augustine grass sod shall have a healthy, virile root system of dense, thickly matted roots throughout a one (1) inch minimum thickness of native soil attached to the roots. 0 04121199 SC -42 0 PART D - SPECIAL CONDITIONS 0 a The sod shall be free from obnoxious weeds or other grasses and shall not contain any matter deleterious to its growth or which might affect its subsistence or hardiness when transplanted. Sod to be placed between curb and walk and on terraces shall be the same type grass as adjacent grass or existing lawn. Care shall be taken at all times to retain native soil on the roots of the sod during the process of excavating, hauling, and planting. Sod material shall be kept moist from the time it is dug until planted. When so directed by the Engineer, the sod existing at the source shall be watered to the extent required prior to excavating. Sod material shall be planted within three days after it is excavated. I fl D CONSTRUCTION METHODS: After the designated areas have, been completed to the lines, grades, and cross -sections shown on the Drawings and as provided for in other items of the contract, sodding of the type specified shall be performed in accordance with the requirements hereinafter described. Sodding shall be either "spot" or "block"; either Bermuda, Buffalo or St. Augustine grass. Da. Spot Sodding Furrows parallel to the curb line or sidewalk line, twelve (12) inches on centers or to the dimensions shown on the Drawings, shall be lopened on areas to be sodded. In all U furrows, sod approximately three (3) inches square shall be placed on twelve (12) inch centers at proper depth so that the too of the $od shall not be more than one-half (1/2) inch below the finished grade. Hole of equivalent depth and , spacing may be used instead of furrows. The soil shall be firm around each block and then the entire sodded area shall be carefully rolled with a heavy, hand (roller developing fifteen (15) to twenty-five (25) pounds per square inch compression. Han tamping may be required on terraces. b. Block Sodding. fl At locations on the Drawings or where directet , sod blocks shall be carefully placed on the prepared areas. The sod shall be so placed that the entire designated area shall be covered, and any voids left in the block sodding shall be filled with additional sod and D tamped. The entire sodded area shall be rolled and tamped to form a thoroughly compact solid mass. Surfaces of block sod, which, in.the opinion of the Engineer, may slide due to the height or slope of the surface or nature' of the soil, shall,. upon direction of the fl Engineer, be pegged with wooden pegs driven through the sod block to the firm earth, Li sufficiently close to hold the block sod firmly in place. fl When necessary, the sodded areas shall be smoothed after planting has been completed and shaped to conform to the cross-section previously provided and existing at the time sodding operations were begun. Any excess dirt from planting operations shall be spread Dfl uniformly over the adjacent areas or disposed of as directed by the Engineer so that the completed surface will present a sightly appearance. fl D The sodded areas shall be thoroughly watered immediately after they are planted and shall be subsequently watered at such times and in a manner and quantity directed by the Engineer until completion and final acceptance of the project by the City of Fort Worth. D 0 04121199 SC -43 0 PART D - SPECIAL CONDITIONS 3. SEEDING DESCRIPTION: "Seeding" will consist of preparing ground, providing and planting seed or a ,mixture of seed of the kind specified along and across such areas as.may be designated on the Drawings and in accordance with these Specifications. MATERIALS: 0 a. General. All seed used must carry a Texas Testing Seed label showing purity and germination, name, type of seed, and that the seed .meets all requirements of the Texas Seed Law. Seed furnished shall be of the previous season's crop and the date of analysis shown on each tag shall be within nine (9) months of time of delivery to the project. Each 'variety of seed shall be furnished and delivered in separate bags or containers. A sample of each variety of seed shall be furnished for analysis and testing when directed by the Engineer. Q The specified seed shall equal or exceed the following percentages of Purity and germination: a Common Name Purity Germination Common Bermuda Grass 95% 90% a Annual Rye Grass 95% 95% Tall Fescue 9.5% 90% Western Wheatgrass 95% 90% Buffalo Grass Varieties Top Gun 95% 90% Cody 95% 90% a Table 120.2.(2)a. URBAN AREA WARM -SEASON SEEDING RATE (lbs.); Pure Live Seed (PLS) 66�� Mixture for Clay or Tight Soils Mixture for Sandy Soils Dates (Eastern Sections). (Western Sections) (All Sections) Feb 1 Bermudagrass 40 Buffalograss 80 Bermudagrass 60 to Buffalograss 60 Bermudagrass 20 Buffalograss 40 May 1 Total: 100 Total: 100 Total: 100 Table, 120.2.(2)b 0 TEMPORARY COOL -SEASON SEEDING RATE; (lb.) Pure Live Seed (PLS) Dates (All Sections) a Aug 15 Tall Fescue 50 to Western Wheatgrass 50 May 1 Annual Rye 50 Total: 100 04/21/99 SC -44 a I PART D - SPECIAL CONDITIONS 0 0 0 0 0 0 0 0 0 0 a 0 0 0 0 0 0 CONSTRUCTION METHODS: After the designated areas have been completed to the lines, grades, and cross -sections shown on the Drawings and, as provided for in other items of this Contract, seeding of the type specified shall be performed in accordance with the requirements hereinafter described. a. Watering. Seeded areas shall be watered as directed by the Engineer so as to prevent washing of the slopes or dislodgment of the seed. b. Finishing. Where applicable, the shoulders, slopes, and ditches shall be smoothed after seed bed preparation has been completed and shaped to conform to the cross-section previously provided and existing at the time planting operations were begun. BROADCAST SEEDING: The seed or seed mixture in the quantity specified shall be uniformly distributed over the areas shown on the Drawings and where directed. If the sowing of seed is by hand, rather than by mechanical- methods, the seed shall be sown in two directions at right angles to each other. Seed and fertilizer shall be distributed at the same time provided the specified uniform rate of, application for both is obtained. "Finishing" as specified in Section D-46, Construction Methods, is not applicable since no seed bed preparation is required. DISCED SEEDING: Soil over the area shown on the Drawings as directed to be seeded shall be loosened to a minimum depth of three (3) inches and all particles in the seed bed shall be reduced to less than one (1) inch in diameter or they shall be removed. The area shall then be finished to line and grade as specified under "Finishing" in Section D-46, Construction Methods. The seed, or seed mixture, specified shall then be planted at the rate required and the application shall be made uniformly. If the sowing of seed is by hand rather than by mechanical methods, seed shall be raked or harrowed into the soil to a depth of approximately one -eight (1/8) inch. The planted area shall be rolled with a corrugated roller of the "Cultipacker" type. All rolling of the slope areas shall be on the contour. ASPHALT MULCH SEEDING: The soil over the area shown on the Drawings, or as directed to be seeded, shall be loosened to the minimum depth of three (3) inches and all particles' in the seed bed shall be reduced to less than one (1) inch in diameter, or they shall be removed. The area shall then be finished to line and grade as specified under "Finishing" in Section D- 46, Construction Methods. Water shall then be applied to the cultivated area of the seed bed until a minimum depth of six (6) inches is thoroughly moistened. After the watering, when the ground has become sufficiently dry to be loose and pliable, the seed, or seed mixture specified, shall then be planted at the rate required and the application shall be made uniformly. If the sowing of seed is by hand, rather than mechanical methods, the seed shall be sown in two directions at right angles to each other. Seed and fertilizer may be distributed at the same time, provided the specified uniform rate of application for both is obtained. After planting, the seed shall be raked or harrowed into the soil to a depth of approximately one -quarter (1/4) inch. The planted surface area and giving a smooth surface without ruts or tracks. In between the time compacting is completed and the asphalt is 04/21/99 SC -45 PART D - SPECIAL CONDITIONS applied, the planted area shall be watered sufficiently to assure uniform moisture from the surface to a minimum of six (6) inches in depth. The application of asphalt shall follow the last watering as rapidly as possible. Asphalt shall be of the type and grade as shown on the Drawings and shall conform to the requirements of the item 300, "Asphalts, Oils and Emulsions". If the type of asphalt to be used is not shown on the Drawings, or if Drawings are not included, then MS -2 shall be used. Applications of the asphalt shall be at a rate of three -tenths (0.3) gallons per square yard. It shall be applied to the area in such a manner so that a complete film is obtained and the finished surface shall be comparatively smooth. RE -SEEDING OF AREAS PLANTED WITH COOL SEASONS SPECIES: Areas where temporary cool season species have been planted may be replanted, beginning February 1 with warm season species as listed in Table 120.2(2)a. The re -seeding will be achieved in the following manner. The cool season species shall be mowed down to a height of one (1) inch to insure that slit -seeding equipment will be able to cut through the turf and achieve adequate soil penetration. * Slit -seeding, is achieved through the use of an implement which cuts a furrow (slit) in the soil and places the seed in the slit which is then pressed close with a cultipacker wheel. CONSTRUCTION WITHIN PARK AREAS TURF RESTORATION OF PARK AREAS: FERTILIZER DESCRIPTION: "Fertilizer" will consist of providing and distributing fertilizer over such areas as are designated on the Drawings and in accordance with these Specifications. MATERIALS: All fertilizer used shall be delivered in bags or containers clearly labeled showing the analysis. The fertilizer is subject to testing by the City of Fort Worth in accordance with the Texas Fertilizer Law. A pelleted or granulated fertilizer shall be used with an analysis of 16-20-0 or 16-5-8 or having the analysis shown on the Drawings. The figures in the analysis represent the percent of nitrogen, phosphoric acid, and potash nutrients respectively as determined by the methods of the Association of Official Agricultural Chemists. In the event it is necessary to substitute a fertilizer of a different analysis, it shall be a pelleted or granulated fertilizer with a lower concentration. Total amount of nutrients furnished and applied per acre shall equal or exceed that specified for each nutrient. CONSTRUCTION METHODS: When an item for fertilizer is included in the Drawings and proposal, pelleted or granulated fertilizer shall be applied uniformly over the area specified to be fertilized and in the manner directed for the particular item of work. Fertilizer shall, be dry and in good physical condition. Fertilizer that is powdered to caked will be rejected.. Distribution of fertilizer as a particular item of work shall meet the approval of the Engineer. Unless otherwise indicated on the Drawings, fertilizer shall be applied uniformly at the average rate of three hundred (300) pounds per acre for all types of "Sodding" and four hundred (400) pounds per acre for all types of "Seeding". 04/21/99 SC -46 a 0 PART D - SPECIAL CONDITIONS 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MEASUREMENT: Topsoil secured from borrow sources will be measured by the square yard in place on the project site. Measurement will be made only on topsoils secured from borrow sources. Acceptable material for "Seeding" will be measured by the linear foot, complete in place. Acceptable material for "Sodding" will be measured by the linear foot, complete in place Acceptable material for "Fertilizer" shall IJe subsidiary to the price of sodding orseeding PAYMENT: All work performed as orderd and measured as provided under "Measurement" shall be paid for at the unit price bid for each item of work. Its price shall be full compensation for excavating (except as noted below, loading, hauling, placing and furnishing all labor, equipment, tools, supplies, and incidentals necessary to complete work. All labor, equipment, tools and incidents s necessary to supply, transport, stockpile and place topsoil or salvage topsoil as specified shall be included in "Seeding" or "Sodding" bid items and will not be paid for directly. "Spot sodding" or "block sodding" as t , e case may be, will be paid for at the contract unit price per square yard, complete in pl 'ce, as provided in the proposal and contract. The contract unit price shall be the total co pensation for furnishing and placing all sod; for all rolling and tamping; for all watering; for disposal of all surplus materials; and for all materials, labor, equipment, tools and incidentals necessary to complete the work, all -in accordance with the Drawings and these Specifications. The work performed and materials furnished and measured as provided under Measurement shall be paid for at the unit price for See ing , or""Sodding", of the type specified, as the case may be, which price shall each be full compensation for furnishing all materials and for performing all operations necessary to complete the work accepted as follows: Fertilizer material and application will not be measured or paid for directly, but is considered subsidiary to Sodding and Seeding. D-74 CONFINED SPACE ENTRY PROGRAM: It shall be the responsibility of the contractor to implement and maintain a variable "CONFINED SPACE ENTRY PROGRAM" which must meet OSHA requirements for all its employees and subcontractors at all times during construction. All active sewer manholes, regardless of depth, are defined by OSHA as "permit required confined spaces". Contractors shall submit an acceptable "CONFINED SPACE ENTRY PROGRAM" for all applicable manholes and maintain an active file for these manholes. The cost of complying with this program shall be subsidiary to the pay items involving work in confined spaces. D-75 SUBSTANTIAL COMPLETION INSPECTION/FINAL INSPECTION: fl 1. Prior to the final inspection being conducted for the project, the contractor shall contact the city inspector in writing when the entire project or a designated portion of the project is substantially complete. 0 04/21/99 SC -47 0 PART D - SPECIAL CONDITIONS .2. The inspector along with appropriate City staff and the City's consultant shall make an inspection of the substantially completed work and prepare and submit to the contractor a list of items needing to be completed or corrected. D 3. The contractor shall take immediate steps to rectify the listed deficiencies and notify the owner in writing when all the items have been completed or corrected. 9 4. Payment for substantial completion inspection as well as final inspection shall be subsidiary to the project price. •Contractor shall still be required to address all other deficiencies which are discovered at the time of final inspection. 5. Final inspection shall be in conformance with general condition item "C5-5.18 Final Inspection" of PART C - GENERAL CONDITIONS. D-76 EXCAVATION NEAR TREES: 0 1. The Contractor shall be responsible for taking measures ,to minimize damage to tree limbs, tree trunks, and tree roots at each work site. All such measures shall be considered as incidental work included in the Contract Unit Price bid for applicable pipe or structure installation except for short tunneling/tree augering. 2 Any and all trees located within the equipment operating area at each work site shall, at a the direction of the Engineer, be protected by erecting a "snow fence" along the drip line or edge of the tree root system between tree and the construction area. 3. Contractor shall inspect each work site, in advance and arrange to have any tree limbs pruned that might be damaged by equipment operations. The Engineer shall be notified at least 24 hours prior to any tree trimming work. No trimming work will be permitted within private property without written permission of the Owner. 4. Nothing shall be stored over the tree root system.within the drip line area of any tree. 5. Before excavation (off the roadway) within the drip line area of any tree, the earth shall be sawcut for a minimum depth of 2 feet. a 6.- At designated locations shown on the drawings, the "short tunnel" method using Class 51 D.I. pipe shall be utilized. D 7. Except in areas where clearing is allowed, all trees up to 8" in diameter damaged during construction shall be removed and replaced with the same type and diameter tree at the contractor's expense. 8. Contractor shall employ a qualified landscaper for all the work required for tree care to ensure utilization of the best agricultural practices and procedures. 9. Short tunneling shall consist of power augering or hand excavation. The tunnel diameter shall not be larger than 1-1/2 times the outside pipe diameter. Voids remaining after pipe installation shall be pressure grouted. 0 04/21/99 SC -48 PART D - SPECIAL. CONDITIONS D-77 CONCRETE ENCASEMENT OF SEWER PIPE: Concrete encasement of sewers shall be paid for at the Contract Unit Price per linear foot of concrete encasement as measured in place fl along the centerline of the pipe for each pipe diameter indicated. The Contract Unit Price shall include all costs associated with installation and reinforcement of the concrete encasement. fl D-78 CLAY DAM: Clay dam construction shall be performed in accordance with the Wastewater Clay Dam Construction, figure in the Drawings in these Specifications, at locations indicated on the Drawings or as directed by the City. Clay dams shall be keyed into undisturbed fl soil to make an impervious barrier to reduce groundwater percolation through the pipeline trench. Construction material shall consist of compacted bentonite clay or 2:27 concrete. Payment for work such as forming, placing and finishing shall, be subsidiary to the price bid for pipe fl installation. D-79 EXPLORATORY EXCAVATION (D -HOLE): The Contractor shall be responsible for verifying the locations of all existing utilities prior to construction, in accordance with item D-22. At locations identified on the drawings, contractor shall conduct an exploratory excavation (D - Hole), to locate and verify the location and elevation of the existing underground utility where it may be in potential conflict with a proposed facility alignment. The exploratory excavation shall be conducted prior to construction of the entire project only at locations denoted on the plans or as directed by the engineer. Contractor shall submit a report of findings (including surveyed elevations of existing conflicting utilities) to the City prior to the start of construction of the entire project. If the contractor determines an existing utility is in conflict with the proposed facility, the contractor shall contact the engineer immediately for appropriate design modifications. 0 - The contractor shall make the necessary repairs at the exploratory excavation (D -Hole) to obtain a safe and proper driving surface to ensure the safety of the general public and to meet the Q approval of the City inspector. The contractor shall be liable for any and all damages incurred due to the exploratory excavation (D -Hole). Payment shall not be made for verification of existing utilities per item D-22. Payment for flexploratory excavation (D -Hole), at locations identified on the plans or as directed by the Engineer, shall include full compensation for all materials, excavation, surface restoration, field surveys, and all incidentals necessary to complete the work, shall be the unit price bid. No 0 payment -shall be made for exploratory excavation(s) conducted after construction has begun. D-80 INSTALLATION OF WATER FACILITIES 80.1 Polyvinyl Chloride (PVC) Water Pipe: POLYVINYL Chloride Plastic Water Pipe and fittings on this Project shall be in accordance with the material standard contained in the fl General Contract Documents. Payment for work such as backfill, bedding, blocking, LI detectable tapes and all other associated appurtenant required, shall be included in the linear foot price bid of the appropriate BID ITEM(S). 0 80.2 Blocking: Concrete blocking on this Project will necessarily be required as shown on the Plans and shall be installed in accordance with the General Contract Documents. All fl valves shall have concrete blocking provided for supporting. No separate payment will be made for any of the work involved for the. item and all costs incurred will be considered to be included in the linear foot bid price of the pipe or the bid price of the valve. 0 0 04121199 SC -49 PART D - SPECIAL CONDITIONS 80.3 Type of Casing Pipe: 1. WATER: The casing pipe for open cut and bored or tunneled section shall be AWWA C-200 Fabricated Electrically Welded Steel Water Pipe, and shall conform to the provisions of E1-15, E1-5 and E1-9 in Material Specifications of General Contract Documents and Specifications for Water Department Projects. The steel casing pipe shall be supplied as follows: For the inside and outside of casing pipe, coal -tar protective coating in accordance with the requirements of Sec. 2.2 and related sections in AWWA C-203. Touch-up after field welds shall provile coating equal to those specified above. C. Minimum thickness for casing pipe used °shall be 0.375 inch. Stainless Steel Casing Spacers (centering style) such as manufactured by Cascade Waterworks Manufacturing Company or an approved equal shall be used on all non - concrete pipes when installed in casing. Installation shall be as recommended by the manufacturer. 2. SEWER: Boring used on this project shall be in accordance with the material standard E1-15 and Construction standard E2-15 a's per Fig. 110 of the General Contract Documents. 3. PAYMENT: Payment for all materials, labor, equipment, excavation, concrete grout, backfill, and incidental work shall be included in the unit price bid per foot. 80.4 Tie -Ins: The Contractor shall be responsible for making tie-ins to the existing water mains. It shall be the responsibility of the Contractor to verify the exact location and elevation of the existing line tie-ins. And any differences in locations and elevation of existing line tie-ins between the contract drawings and what may be encountered in the field shall be considered as incidental to construction. The cost of making tie-ins to existing water or sanitary sewer mains shall be included in the linear foot bid price of the pipe. 80.5 Connection of Existing Mains: The Contractor shall determine the exact location, elevation, configuration and angulation of existing water or sanitary sewer lines prior to manufacturing of the connecting piece. Any differences in locations, elevation, configuration, and or angulation of existing lines between the contract drawings and what may be encountered in the said work shall be considered as incidental to construction. Where it is required to shut down existing mains in order to make proposed connections, such down time shall be coordinated with the Engineer, and all efforts shall be made to keep this down time to a minimum. In case of shutting down an existing main, the Contractor shall notify the Manager, Construction Services, Phone 871-7813, at least 48 - hours prior to the required shut down time. The Contractor's attention is directed to Paragraph C5-5.15 INTERRUPTION OF SERVICE, Page C5-5(5), PART C - GENERAL CONDITIONS OF THE WATER DEPARTMENT GENERAL CONTRACT DOCUMENTS AND GENERAL SPECIFICATIONS. The Contractor shall notify the customer both personally and in writing as to the location, time, and schedule of the service interruption. 04121199 SC -50 U PART D - SPECIAL CONDITIONS aThe cost of. removing any existing concrete blocking shall be included in the cost of connection. Unless bid .separately all cost incurred shall be included in the linear foot price bid for the appropriate pipe size. 80.6 Valve Cut -Ins: It may be necessary to cut -in gate valves to isolate the water main afl from which the extension and/or replacement is to be connected: This may require closing valves in other lines and putting consumers out of service for that period of time necessary to cut in the new valve; the work must be expedited to the utmost and all such fl cut -ins must be coordinated with the engineer in charge of inspection. All consumers shall be individually advised prior to the shut out and advised of the approximate length of time they may be without service. Payment for work such as backfill, bedding, fittings, blocking and all other associated appurtenants required, shall be included in the price of.the appropriate bid items. U 80.7 Water Services: The relocation, replacement, or reconnection of water services will be required as shown on the plans, and/or as described in these Special Contract n Documents in addition to those located in the field and identified by the Engineer. u All service's shall be constructed by the contractor utilizing approved factory manufactured tap saddles (when required) and corporation stops,'type K copper water tubing, curb stops with lock wings, meter boxes, and if required approved manufactured service branches. All materials used shall be as specified in the Material Standards (El - 17 & E1-18) contained in the General Contract Documents. All water services to be replaced shall be installed at a minimum depth of 36 inches R., below final grade. All existing 3/4 -inch water service lines which are to be replaced shall be replaced with 1 - inch Type K copper, 1 -inch diameter fap saddle when required, and 1 -inch corporation from the main line to the meter box. All services which are to be replaced or relocated shall be installed with the service main tap and service line being in line with the service meter unless otherwise directed by the Engineer. flA minimum of 24 hours advance notice shall be given when service interruption will be Li required as specified in Section C5-5.11'5 INTERRUPTION OF SERVICE. fl All water service meters shall be removed, tagged, and collected by the contractor for LI pickup by the Water Department for reconditioning or replacement. After installation of the water service in the proposed locatioil End receipt of a meter from the project inspector fl the contractor shall install the meter. The meter box shall be reset as necessary to be 1',J flush with existing ground or as otheMis6 directed by the Engineer. All such work on the outlet side of the service meter stail be performed by a licensed plumber. 1. WATER SERVICE REPLACEMENTS:) Water service replacement or relocation is required when the existing service is Iead or is too shallow to avoid breakage during street 0 04/21/99 SC -5 PART D SPECIAL CONDITIONS reconstruction. The contractor shall replace the existing service line with Type K copper from the main to the meter, curb stop with lock wings, and corporation stop. Payment for all work and materials such as backfill, fittings, type K copper tubing, curb stop with lock wings, service line adjustment, and any relocation of up to 12 -inches from center line existing meter location to center line proposed, meter location shall be included in the Linear Foot price bid for Copper Service Line from Main to five (5) feet behind Meter. Any vertical adjustment of customerservice line within the 5 foot area shall be subsidiary to the service installation. Payment for all work and materials such as tap saddle (if required), corporation stops, and fittings shall be included in the price bid for Service Taps to Main. 2. WATER SERVICE RECONNECTION: Water service reconnection is required when the existing service is copper and at adequate depth to avoid breakage during street reconstruction. The contractor shall adjust the existing water service line as required for reconnection and furnish a new tap with corporation stop. The contractor will be paid for ,one (1) Service Tap to Main for each service reconnected plus for any copper service line used in excess of five (5) feet from Main to five (5) feet behind the Meter. 3. WATER SERVICE METER AND METER BOX RELOCATIONS: When the replacement and relocation of a water service and meter box is required and the location of the meter and meter box is moved more than twelve (12) inches, as measured from the center line of the existing meter to location to the center line of the proposed meter location, separate payment will be allowed for the relocation of service meter and meter box. Centerline is defined by a line extended from the service tap through the meter. Only relocations made perpendicular to this centerline will be paid for separately. Relocations made along the centerline will be paid of in feet of copper service line. When relocation of service meter and meter box is required, payment for all work and materials such as backfill, fittings, five (5) feet of type K copper service and all materials, labor, and equipment used by and for the licensed plumber shall be included in the price bid for the service meter relocation. All other costs will be included, in other appropriate bid item(s). This item will also be used to pay for all service meter and meter box relocations as required by the Engineer when the service line is not being replaced. -Adjustment of only the meter box and customer service line within 5 feet distance behind the meter will not justify separate payment at any time. Locations with multiple service branches will be paid for as one service meter and meter box relocation. 4. NEW SERVICE: (when required), and meter box. When new services are requiredthe contractor shall install tap saddle corporation stop, type K popper service line, curb stop with lock wings, Q Payment for all work and materials such as backfill, fittings, type K copper tubing, and curb stop with lock wings shall be included in the Linear Foot price bid for Service Line ,from Main to Meter five (5) feet behind the meter. .0 04/21/99 SC -52 a 0 PART D - SPECIAL CONDITIONS 0 0 I 0 a 0 Payment for all work and materials such as tap saddle, corporation stops, and fittings shall be included in the price bid for Service Taps to Mains. Payment for all work and materials such as furnishing and setting new meter box shall be included in the price bid for furnish and set,meter box. 5. MULTIPLE SERVICE BRANCHES: When multiple service branches are required the contractor shall furnish approved factory manufactured branches. Payment for multiple service branches will include furnishing and installing the multiple service branch only and all other cost will be included in other appropriate bid item(s). 6. MULTIPLE STREET SERVICE LINES TO SINGLE SERVICE METER: Any multiple service lines with taps servicing a single service meter encountered during construction shall be replaced with one service line that is applicable for the size of the existing service meter and approved by the Engineer. Payment shall be made at the unit bid price in the appropriate bid item(s). 80.8 2 -Inch Temporary Service Ling: The 2 -inch temporary service main and 3/4 -inch a service lines shall be installed to provide temporary water service to all buildings that will necessarily be required to have severed water service during said work. The contractor shall be responsible for coordinating the schedule of the temporary service connections and permanent service reconnections with the building owners and the Engineer in order that the work be performed in an exPeditious manner. Severed water service must be reconnected within 2 hours of discontinuance of service. A 2 -inch tapping saddle and 2 -inch I corporation stop or 2 -inch gate valve with an appropriate fire hydrant adapter fitting shall be required at the temporary service point of connection to the City water supply. trhe 2 -inch temporary service main and 3/4 -inch fl service lines shall be installed in ac ordance to the attached figures 1>, 2 and 3. 2" temporary service line shall be cleaned and sterilized by using chlorine gas or chlorinated lime (HTH) prior to installation. Li A two-inch meter will be furnished by the Water Department Meter Shop and installed by the Contractor at its point of connection to the City water supply for record keeping fl D purposes only. The out -of -service meters shall be removed, tagged and collected by the Contractor for delivery to the Wate1r Department Meter Shop for reconditioning or replacement. Upon restoring permanent service, the Contractor shall re -install the meters fl at the correct location. The meter box shall be reset as necessary to be flush with the Li existing ground or as otherwise directed by the Engineer. fl The temporary service layout shall have a minimum available flow rate of 5 GPM at a Li dynamic pressure of 35 PSI per service tap. This criteria shall be used by the Contractor to determine the length of temporary service allowed, number of service taps and number of feed points. 0 J04121199 SC -53 PART D - SPECIAL CONDITIONS When the temporary service is required for more than one location -the 2 -inch temporary LJ service pipes, 3/4 -inch service lines and. the 2 -inch meter shall be moved to the next successive project location. 0 Payment for work such as fittings, 3/4 -inch service lines, asphalt, barricades, all service connections, removal of temporary services and all other associated appurtenants required, shall be included in the appropriate bid item. 80.9 Adjust Manholes, and Vaults (Utility Cut): Contractor will be responsible for adjusting water valve boxes, manholes and vaults to match new pavement grade. The unit price bid will be full payment for materials including all labor, equipment, tools and incidentals necessary to complete the work. 0 80.10 Adjust Water Valve Boxes: Contractor will be responsible for adjusting water valve boxes to match new pavement grade. The water valves themselves will be adjusted, if necessary, by City of Fort Worth Water Department forces. Prior to the beginning of work, the Contractor shall make an inventory of the condition of existing water valve boxes. The Construction Engineer will field verify this inventory and provide the Contractor replacements for broken valve boxes. The contractor shall replace the valve boxes which are damaged during construction at no cost to the City. The unit price bid per each will be full compensation for all labor, materials, equipment, tools, and incidentals necessary to complete the work. 80.11 Purging and Sterilization of Water Lines: Beforebeing placed into service all newly constructed water lines shall be purged and sterilized in accordance with E2-24 of the General Contract Documents and Specifications except as modified herein. The Contractor will furnish all water for INITIAL cleaning and sterilization of water lines. All materials for construction of the project, including appropriately sized "pipe cleaning pigs", chlorine gas or chlorinated lime (HTH) shall be furnished by the Contractor. Chlorinated lime (HTH) shall be used in sufficient quantities to provide a chlorine residual of fifty (50) PPM. The residual of free chlorine shall be measured after 24 hours and shall not be less than 10 parts per million of free chlorine. Chlorinated water shall be disposed of in the sanitary sewer system. Should a sanitary sewer not be available, chlorinated water shall be "de -chlorinated" prior to disposal. The line may not be placed in service until two successive sets of samples, taken 24 hours apart, have met the established standards of purity. Purging and sterilization of the water lines shall be considered as incidental to the project and all costs incurred will be considered to be included in the linear foot bid price of the pipe. 80.12 Work Near Pressure Plane Boundaries: Contractor shall take note that the water line to be replaced under this contract may cross or may be in close proximity to an existing pressure plane boundary. Care shall be taken to ensure all "pressure plane" valves installed are installed closed and no cross connections are made between pressure planes 04/21/99 SC -54 [1 0 PART D - SPECIAL CONDITIONS 4 0 0 0 PAYMENT FOR FIGURE 34 INSTALLATIONS: Payment for all work and materials Q necessary for the installation of the 3/4 -inch type K copper service line will be shall be included in the price bid for copper Service Line from Main to Meter. 80.13 Water Sample Station: GENERAL: All water sampling station installations will be per attached Figure 34 or as required in large water meter vaults as per Figure 33 unless otherwise directed by the Engineer. The appropriate water sampling station will be furnished to the Contractor free of charge; however, the Contractor will be required to pick up this item at the Field Operations Warehouse. Payment for all work and materials necessary for the installation tap saddle (if required), corporation stops, and fittings shall be included in the price bid for Service Taps to Main. Q Payment for all work and materials necessary for the installation of the sampling station, concrete support block, curb stop, fittings, and an incidental 5 -feet of type K copper service line which are required to provide a complete and functional water sampling a station shall be included in the price bid for Water Sample Stations. PAYMENT FOR FIGURE 33 INSTALLATIONS: Payment for all work and materials necessary for the installation tap saddle, gate valve, and fittings shall be included in the n price bid for Service Taps to Main. ,Payment for all work and materials necessary for the installation of the sampling station, modification to the vault, fittings, and- alI type K copper service line which are required to provide a complete and functional water sampling station shall be included in the price bid for Water Sample Stations. 0 80.14 Ductile Iron and Gray Iron Fittings: Reference Part E2 Construction Specifications, Section E2-7 Installing Cast, Iron Pipe, flfittings, and Specials, Sub section E2-7.11 Cast Iron Fittings: the first Paragraph shall be revised to read as follows: IJ E2-7.11 DUCTILE -IRON AND GRAY -IRON FITTINGS: All ductile -iron and gray -iron fittings shall be furnished with cement mortar lining as stated in Section E1-7. The price bid per ton of fittings shall be payment in full for all fittings, joint accessories, polyethylene Qfl wrapping, horizontal concrete blocking, vertical tie -down concrete blocking, and concrete cradle necessary for construction as designed. fl Q All ductile -iron and gray -iron fittings, valves and specials shall be wrapped with polyethylene wrapping conforming to Material Specification E1-13 and Construction Specification E2-13. Wrapping shall, precede horizontal concrete blocking, vertical tie - fl concrete blocking, and concrete cradle. Payment for the polyethylene wrapping, horizontal concrete blocking, vertical tie -down concrete blocking, and concrete cradle shall be included in bid/items for vales and fittings and no other payments will be allowed. 0 04/21/99 SC -55 0 PART D - SPECIAL CONDITIONS D-81 SPRINKLING FOR DUST CONTROL: All applicable provisions of Standard Specifications Item 200, "Sprinkling for Dust Control" shall apply. However, no direct payment will ,be made for this item and it shall be considered to this 6�1 contract. M D-82 DEWATERING: 0 The Contractor shall be responsible for determining the method of dewatering operation for the water or sewage flows from the existing mains and ground water. The Contractor shall be responsible for damage of any nature resulting from the dewatering operations. The DISCHARGE from any dewatering operation shall be conducted as approved by the 0 Engineer, Ground water shall not be discharged into sanitary sewers. Dewatering shall be considered as incidental to a construction and all costs incurred will be 0 considered to be included in the project price. D-83 TRENCH EXCAVATION ON DEEP TRENCHES: 0 Contractor to prevent any water flowing into open trench during construction. Contractor shall not leave excavated trench open overnight. Contractor shall fill any trench the same day of excavation. No extra payment shall be allowed for this special condition. D-84 TREE PRUNING: A. REFERENCES: National Arborist Association's "Pruning Standards for Shade Trees". B. 'ROOT PRUNING EQUIPMENT 0 1. Vibratory Knife 2. Vermeer V-1550RC Root Pruner C. NATURAL RESOURCES PROTECTION FENCE CI 1. Steel "T" = Bar stakes, 6 feet long. 2. Smooth Horse -Wire: 14-1/2 gauge (medium gauge) or 12 gauge (heavy gauge). 3. Surveyor's Plastic Flagging: "Tundra" weight, International fluorescent orange or red a color. 4. Combination Fence: Commercially manufactured combination soil separator fabric on wire mesh backing as shown on the Drawings. D. ROOT PRUNING a 1. Survey and stake location of root pruning trenches as shown on drawings. 0 04/21/99 SC -56 I PART D - SPECIAL CONDITIONS I Li 0 2. Using the approved specified equipment, make a cut a minimum of 36 inches deep in order to minimize damage to the undisturbed root zone. 3. Backfill and compact the trench immediately after trenching. 4. Place a 3 -foot wide by 4 -inch deep cover of mulch over the trench as required by the Engineer. 5. Within 24 hours, prune flush with ground and backfill any exposed roots due to construction activity. Cover with wood chips of mulch in order to equalize soil temperature and minimize water loss due to evaporation. 6. Limit any grading work within conservation areas to 3 -inch maximum cut or fill, with no fl roots over 1 -inch diameter being cut unless cut by hand or cut by specified methods, equipment and protection. I D D 0 II 0 I ii 0 E. MULCHING: Apply 2 -inches to 4 -inches of wood chips from trimming or clearing operation on areas designated by the Engineer. F. Tree Pruning shall be considered subsidiary to the project contract price. D-85 TREE REMOVAL: Trees to be removed shall be removed using applicable methods, including stump and root ball removal, loading, hauling and dumping. Extra caution shall be taken to not disrupt existing utilities both overhead and buried. The Contractor shall immediately repair or replace any damage to utilities and private property including, but not limited to, water and sewer services, pavement, fences, walls, sprinkler system piping, etc., at no cost to the Owner. All costs for tree removal, including temporary service costs, shall be considered subsidiary to the project contract price and no additional payment will be allowed. D-86 TEST HOLES: The matter of subsurface exploration to ascertain the nature of the soils, including the amount of rock, if any, through which this pipeline installation is to be made is the responsibility of any and all prospective bidders, and any bidder on this project shall submit his bid under this condition. Whether prospective bidders perform this subsurface exploration jointly or independently, and whether they make such determination by the use of test holes or other means, shall be left to the discretion of such prospective bidders. If test borings have been made and are provided for bidder's information, at the locations shown on the logs of borings in the appendix of this specification, it is expressly declared that neither the City nor the Engineer guarantees the accuracy for the information or that the material encountered in excavations is the same, either in character, location, or elevation, as shown on the boring logs. It shall be the responsibility of the bidder to make such subsurface investigations as he deems necessary to determine the nature of the material to be excavated. The Contractor assumes all responsibility for interpretation of these records and for making and maintaining the required excavation and of doing other work affected by the geology of the site. Q04/21/99 SC -57 D PART D - SPECIAL CONDITIONS The cost of all rock removal and other associated appurtenances, if required, shall be included in 0 the linear foot bid price of the pipe. 0 0 0 0 0 0 0 0 0 0 0 0 J 1 0 0 04121199 SC -58 a PART DA -ADDITIONAL SPECIAL CONDITIONS DA -1 THIS ITEM INTENTIONALLY DELETED.........................................................................ASC-3 �..J DA -2 PIPELINE REHABILITATION PIPE ENLARGEMENT SYSTEM ......................................ASC-3 DA -3 THIS ITEM INTENTIONALLY DELETED...................................................................... ASC-10 DDA -4 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-11 DA -5 PIPE INSTALLED BY OTHER THAN OPEN CUT ......................................................... ASC-11 DA -6 THIS ITEM INTENTIONALLY DELETED...................................................................... ASC-14 DA -7 PROTECTIVE, MANHOLE COATING FOR CORROSION PROTECTION ..................... ASC-14 DA -8 MANHOLE REHABILITATION ITEMS.......................................................................... ASC-17 DA -9 SURFACE PREPARATION FOR MANHOLE REHABILITATION .................................. ASC-27 LIDA -10 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-28 DA -1 I THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-29 DA -12 INTERIOR MANHOLE COATING- .......................................... SPRAYWALL SYSTEM ASC-29 fl DA -13 INTERIOR MANHOLE COATING - RAVEN LINING SYSTEM ..................................... ASC-31 DA -14 THIS ITEM INTENTIONALLY DELETED DA -15 THIS ITEM INTENTIONALLY DELETED ....................................................................... ASC-34 ........,..................................................... ............ASC-34 DDA -16 THIS ITEM INTENTIONALLY DELETED ....................................................................... ASC-34 DA -17 THIS ITEM INTENTIONALLY DELETED DA -18 THIS ITEM INTENTIONALLY DELETED ....................................................................... ASC-34` .................................................................... ... ASC-34 aDA -19 VACUUM TESTING OF REHABILITATED MANHOLES ................................................ ASC-34 DA -20 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-38 0 DA -21 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-38 aDA -22 REPLACEMENT OF CONCRETE CURB AND GUTTER .............................................. ASC-38 DA -23 REPLACEMENT OF 6" CONCRETE DRIVEWAYS....................................................... ASC-38 DA -24 REPLACEMENT OF H.M.A.C. PAVEMENT AND BASE ................................................ ASC-38 Ii 04/16/99 ASC-1 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS DA -25 GRADED CRUSHED STONES..................................................................................... ASC-39 DA -26 THIS ITEM INTENTIONALLY DELETED...................................................................... ASC-39 U DA -27 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-39 DA -28 THIS ITEM INTENTIONALLY DELETED...................................................................... ASC-39 DA -29 REPLACEMENT OF 7" CONCRETE VALLEY GUTTER ........> ..........................:............ ASC-39 0 DA -30 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-40 DA -31 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-40 0 DA -32 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-40 0 'DA -33 REINFORCED CONCRETE PAVEMENT OR BASE (UTILITY CUT) ............................ ASC-40 DA -34 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-41 0 OA -35 THIS ITEM INTENTIONALLY DELETED....................................................................... ASC-41 DA -36 THIS ITEM INTENTIONALLY DELETED...................................................................... ASC-42 DA -37 THIS ITEM INTENTIONALLY DELETED .......................................................................ASC-42 ( 0 DA -38 THIS ITEM INTENTIONALLY DELETED........................................................................ASC-42 0 D 0 0 D 0 .0 04/16/99 AS C-2 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS I I I C I I I I I C 0 I 0 I I DA -1 THIS ITEM INTENTIONALLY DELETED: DA -2 PIPE ENLARGEMENT SYSTEM: A. GENERAL: 1. Description: This specification includes requirements to rehabilitate existing sanitary sewers by the pipe enlargement system, herein called Pipe Bursting or Pipe Crushing (Pipe Bursting/Crushing). This system includes splitting or bursting the existing pipe to install a new polyethylene pipe and reconnect existing sewer service connections. 2. Methods: This section specifies the approved system method or process to include all labor, materials, tools, equipment and incidentals necessary to provide for the complete rehabilitation of deteriorated gravity sewer lines by the Pipe Bursting/Crushing systems. Approved methods include: the PIM Corporation (PIM System), Piscata Way, New Jersey; McLat Construction (McConnell System for Pipe Crushing), Houston, Texas; and Trenchless Replacement Systems, (TRS System), Calgary, Canada. Refer to Part D - SPECIAL CONDITIONS D-61 SIBSTITUTIONS for information regarding pre -approval procedures for alternative processes. 3. Definition: The Pipe Bursting/Crushing system is defined as the reconstruction of gravity sewer pipe by installing an approved pipe material, by means of one of the pre -approved methods set forth in Section A.2 of this specification. The process involves the use of a static, hydraulic or pneumatic hammer "moling" device, suitably sized to break out the old pipe or using modified boring "knife" with a flared plug that implodes and crushes the existing sewer pipe. Forward progress of the "mole" or the "knife" may be aided by the use of hydraulic equipment or other apparatus, as specified in the approved methods. The replacement pipe is either pulled or pushed into the bore. The method allows for replacement of pipe sizes from 8" through 21" and/or upsizing in varying increments up to 21". This specification is based on the precedent that the Pipe Bursting/Crushing system used has been pre -approved by the City of Fort Worth Department of Engineering, and Fort Worth Water Department. 0 04/16/99 4. Quality Assurance: The Contractor shall be certified by the particular Pipe Bursting/Crushing system manufacturer that such firm is a licensed installer of their system. No other Pipe Bursting/Crushing system other than those listed in Section A.2. of these specifications is acceptable. a. Personnel directly involved with installing the new pipe shall receive training in the proper methods for joint fusing, handling, and installing the polyethylene pipe. Training shall be performed by a qualified representative as determined by the pipe manufacturer. ASC-3 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS b. Personnel directly involved with installing the new pipe shall receive PP training in the proper methods for joint fusing, handling, and installing the polyethylene pipe. Training shall be performed by a qualified representative as determined by the pipe manufacturer. 5. Submittals: Submit for review and acceptance, the following Contractor's Work 0 Plan and Drawings to the Department of Engineering (DOE): a. Shop drawings, catalog data, and manufacturer's technical data showing complete information on material composition, physical properties, and dimensions of new pipe and fittings. Include manufacturer's recommendation for handling, storage, and repair of pipe and fittings if 0 damaged. b. Location and number of insertion or access pits shall be planned by Contractor and submitted in writing prior to excavation for approval by DOE. 0 c. Method of construction and restoration of existing sewer service connections. This shall include: 0 1) Detail drawings and written description of the entire construction procedure to install pipe, bypass sewage flow and reconnection of sewer service connections. 2) Working drawings for information only showing sewage flow bypass, and maintenance of traffic. Contractor shall provide for continuous sewerage flow. Dewatering shall be the Contractor's responsibility. 3) Certification of workmen training for installing pipe. 4) Television inspection reports and video tapes made after new pipe installation. 6. Delivery, Storage, and Handling: a. Transport, handle, and store pipe and fittings as recommended by manufacturer. b. If new pipe and fittings become damaged before or during installation, it shall be repaired as recommended by the manufacturer or replaced as required by the Project Manager at the Contractor's expense, before Q• proceeding further. c. Deliver, store and handle other materials as required to prevent damage. 0 0 04/16/99 AS C-4 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING o U PART DA - ADDITIONAL SPECIAL CONDITIONS B. MATERIALS: 9 1. Polyethylene Piping Material: The pipe and fitting material s�all be high density, extra molecular weight (EHMW) polyethylene pipe material conforming to ASTM D1248, Type III, Class C, Category 5, Grade P34, and hav a PPI (Plastic Pipe fl Institute) recommended designation of PE3408 and cell classi ication 345434C per LL.II ASTM D3350. The molecular weight category shall be ex ra high (250,000 to 1,500,000) as per the Gel Permeation Chromatography det rmination procedure with a typical value of 330,000. a. The interior of the pipe shall be a light reflective color to facilitate closed p circuit television inspection. b. The pipe material shall be listed by the Plastic Pipe Institute (PPI) in PPI TR-4. The pipe material shall have as hydrostatic design basis of 1600 psi 9 at 73 F and 800 psi at 140 F. c. The manufacturer's certification shall state that the pipe was manufactured fl from one specific resin and shall state the resin used and its source. All pipe shall be made of virgin material. No rework, except that obtained from the manufacturer's own production of the same formulation, shall be used. d. Pipe supplied under this specification shall have a nominal IPS (Iron Pipe Size) outside diameter. The Standard Dimension Ratio (SDR) and minimum pressure rating of the pipe shall be SDR 17 - 100 psi. Pipe with a lower SDR ratio and higher pressure rating may be used in lieu of the minimum specified. 2. Tests: The Contractor shall be required to send submittals to the City of Fort Worth on the production material. a. The pipe manufacturer shall provide certification that samples of the production product meets these specifications. The certification will state that production product has been tested in accordance with ASTM D2837, aand validated in accordance with the latest revision of PPI TR-3. b. The pipe manufacturer shall provide certification that stress regression 0 testing has been performed on the specific product. Certification shall include a stress life curve per ASTM D2837 and testing shall have been performed in accordance with ASTM D2837. U c. Rejection: Polyethylene plastic pipe and fittings may be rejected for failure to meet any of the requirements of this specification. U C. SEWER SERVICE CONNECTIONS: fl - 1. Sewer Service Connections: Sewer service connections shall be connected to the L11new pipe by mechanical or fusion methods. Once the saddle is secured, a hole shall be drilled in the pipe the full inside diameter of saddle outlet. 0 04/16/99 ASC-5 . PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS 2. Pipe Saddles: Mechanical saddles shall be made of polyethylene pipe compound that meets the requirements of ASTM D1248, Class C, have stainless steel straps and fasteners, neoprene gasket and backup plate. Mechanical saddles shall be Strap -on -Saddle Type as manufactured by Driscopipe or Tapping Saddle manufactured by DuPont, or approved equal. Fusion saddles shall be electrofusion branch saddles as manufactured by Central Plastics Company, or approved equal. 3. Connection to Existing Service: Connectionsto the existing sewer service connections pipe shall be made using flexible couplings. All flexible couplings shall conform to ASTM C425 -and shall be as manufactured by Fernco Joint Sealer Co., DFW Plastics, Inc. or approved equal. Backfill at service connections shall be cement stabilized sand (2 sacks per cubic yard) to a point 12 inches above the service lateral to trench intersection and shall be in accordance with these specifications. The Contractor shall, upon request, permit the Engineer to take elevations on both the existing, and new portions of the service connection pole to determine final grade and invert elevations. Elevation changes greater than 0.10 feet from the house lateral piping and shall be reconnected as directed by the Engineer. 4. Service Interruptions: Service interruptions to homes shall not exceed 18 hours. D. 04/16/99 PREPARATION: 1. Bypassing Sewage: a. The Contractor shall bypass the sewage around the section or sections of sewer to be rehabilitated. The bypass shall be made by plugging existing • upstream manhole and pumping the sewage into a downstream manhole or adjacent system or other method as may be approved by the Engineer. The pump and bypass lines shall be of adequate capacity and size to handle the flow without sewage backup occurring to facilities connected to the sewer. b. The Contractor shall be responsible for continuity of sanitary sewer service to each facility connected to the section of sewer during the execution of the work. If sewage backup, occurs and enters buildings, the Contractor shall be responsible for clean-up, repair,, property damage costs and claims. 2. Line Obstructions: If pre -installation (TV) inspection reveals an obstruction in the existing sewer (heavy solids, dropped joints, protruding service taps or collapsed pipe) which will prevent completion of the pipe bursting/crushing process, and cannot be removed by conventional sewer cleaning equipment, then an ASC-6 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 0 PART DA - ADDITIONAL SPECIAL CONDITIONS obstruction removal shall be made by the Contractor, with the approval of the Engineer. r 3. Sags in Sewer Line: ALL SAGS AND GRADE PROBLEMS IN EXISTING SEWER LINES SHALL BE CORRECTED AS PART OF THIS CONTRACT. If the pre - 0 construction television inspection reveals a sag in the sewer line, the Contractor shall be responsible for bringing the proposed sewer pipe to an acceptable grade without a sag. A sag is defined as any sewer line segment more than 3 feet in length which ponds water in the absence of sewage flow. The contractor shall L! take the necessary measures to eliminate the sag by the method of: pipe replacement, digging a sag elimination pit and bringing the bottom of the pipe trench to a uniform grade in line with the existing pipe invert or by other measures that shall be acceptable to the Engineer and the City. fl a. Identification of Sags: Sags shall be identified by television inspection in the absence of sewage flow. If availabld, the, Contractor shall be furnished television tapes from the City identifying the sag location. Flow shall be j" blocked at an upstream manhole and diverted to another sewer line or U downstream manhole below the segment of pipe to be inspected. TV inspection shall be performed in accordance with television inspection of fl sanitary sewer lines. Video tapes shall be submitted to the Department of Li Engineering for review. fl b. Correction of Sags: Sags shall be corrected by open t cut and by adding additional bedding material to bring the sag back to grade where access is available. For pipe enlargement methods, all sags identified on the pre - construction video tapes shall be corrected prior to commencing with pipe aenlargement. In instances where sags are located under existing structures, the existing sewer line may be relocated using open cut or boring methods. The Department of Engineering shall specifically review potential relocation's and evaluate the constructability, economics and engineering feasibility prior to construction work. c. Measurement and Payment: Measurement and payment to correct sags shall be per linear foot of pipe construction to correct the sag. For pipe bursting methods, open -cut or bore construction, the applicable bid prices in the proposal section shall apply. 4. Television Inspection: Inspection of the pipelines shall be performed by experienced personnel trained in locating breaks, obstacles and service a connections by closed circuit color television. Television inspection shall be in accordance with the specifications contained herewith for "Pre- and Post - Construction Television Inspection of Sanitary Sewer Lines". E. PIPE ENLARGEMENT SYSTEM AND PIPE INSTALLATION: 0 04/16/99 ASC-7 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 1. Site Organization: v a. Insertion or access pits shall be located such that their total number shall 9 be minimized and the length of replacement pipe installed in a single pull shall be maximized. manholes shall be utilized wherever practical. Manhole inverts b. Existing and bottoms may be removed to permit access for installation equipment. c. Equipment used to perform the work shall be located away from buildings so as not to create a noise impact. Provide silencers or other devises to reduce machine noise as needed to meet requirements. 0 2. Finished Pipe: The installed replacement pipe shall be continuous over the entire length of each pipe segment from manhole to manhole and shall be free from visual defects such as foreign inclusions, concentrated ridges, discoloration, pitting, varying wall thickness, pipe separation, other deformities. Replacement pipe with gashes, nicks, abrasions, or any such physical damage which may have occurred during storage and/or handling, which are larger/deeper than 10% of the wall thickness shall not be used and shall be removed from the construction site. The replacement pipe passing through or terminating in a manhole shall be carefully cut out in a shape and manner approved by the Engineer. The invert and benches shall be streamlined and improved for smooth flow. The installed pipe shall meet the leakage requirements of the pressure test specified later. 3. Pipe Jointing: a. Sections of polyethylene replacement pipe shall be assembled and joined 0 on the job site above the ground. Jointing shall be accomplished by the heating and butt -fusion system in strict conformance with the manufacturer's printed instructions. 9 b. The butt -fusion system for pipe jointing shall be carried out in the field by operators with prior experience -in fusing polyethylene pipe with similar equipment using proper jigs and tools per standard procedures outlined by the pipe manufacturer. These joints shall have a smooth, uniform, double rolled back bead made while applying the proper melt, pressure, and 0 alignment. It shall be the sole responsibility of the Contractor to provide an acceptable butt -fusion jyoint. All joints shall bb made available for inspection by the Engineer before insertion. The replacement pipe shall be joined on the site in appropriate working lengths near the insertion pit. The maximum length of continuous replacement pipe which shall be assembled above ground and pulled on the job site at any one time shall be 600 linear feet. 0 c. For situations where the replacement pipe is not pulled all the way to the manhole or if it is impossible to pull the missle all the way through, the following shall apply: At the direction of the Engineer, a 12"-18" full circle steel clamp shall be utilized to connect segments of the HDPE pipe. 04/16/99 AS C-8 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS 4. New Pipe Installation: a. Thread winch cable or chain and associated lines through sewer section to be rehabilitated. Kelp lines away from pedestrian and vehicular traffic. b. Existing manholes may be used for launch and receiving access. Remove manhole invert and bottom as required. Pull winch chain through sewer section and attach to cutter and machine head. Lower into launching manhole, apply winch tension pulling the cutter and head into the sewer until the rear of the machine is flush with the manhole wall. Attach steel starter pipe and advance assembly until the rear of the steel starter pipe is flush with the manhole wall. Lower hydraulic jack into the manhole and align. Insert new pipe by simultaneous operation of the jack and winching the cutter and head forward. 5. Anchoring New Pipe and Sealing Manholes: a. After the new pipe has been installed in the entire length of the sewer section, anchor the pipe at manholes. The new pipe shall protrude in the manholes for enough distance to allow sealing and trimming. b. Sealing the new pipe at manholes shall not begin for a minimum of ten (10) hours after installation. - Provide a flexible gasket connector in the manhole wall at the end of the new pipe, centered in the existing manhole wall. Grout flexible connector in the manhole, filling all voids the full thickness of the manhole wall. c. Restore manhole bottom and invert. 6. Field Testing: a. Low Pressure Air Test of Replacement Pipe: After a manhole -to -manhole section of sanitary sewer main has been pipe burst/crushed and prior to any service lines being connected to the replacement pipe, the pipe shall be plugged at each manhole with pneumatic plugs. The design of the plugs shall be such that they will hold against the test pressure without requiring external blocking or bracing. One of the plugs shall have three air hose connections; on4 for the inflation of the plug, one for reading the air pressure in the sealed line, and one for introducing air into the sealed line. Low pressure air shell then be introduced into the sealed line until the internal air pressure reaches 4.0 psig greater than the average back pressure resulting fron any ground water that may be over the pipe. At least two minutes sh ll elapse to allow the pressure to stabilize. The time required for the inter al pressure to decrease from 3.5 to 2.5 psig greater than the average back pressure resulting from any ground water that may be over the pipe, shall not be less than the time shown for a given pipe diameter in the following table: 04/16/99 AS C-9 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS Carrier Pipe Minimum Elapsed Diameter (inches) Time (minutes) 8 • 4 10 5 12 6 15 7 b. Post -Construction Television Inspection of New, Pipe: Refer to Special Condition for Post -Construction Television Inspection of Sanitary Sewer. F. MEASUREMENT AND PAYMENT: 1. Pipe Installation: Pipe installation will be measured for payment by the linear foot of pipe actually installed in the various diameters of sewers measured along the centerline of the sewer from centerline to centerline of manholes. Payment will be made for the quantities measured at the unit price per linear foot for the various sewer diameters listed. 2. Service Reconnections: Installation of sewer service connections will be measured for payment by each actually reconnected to the installed pipe. Payment will be made for the quantities measured at the unit price per each listed. Payment shall include required excavation and backfill, saddles, flexible connections, and all other incidentals necessary to successfully reconnect sewer service lines to the rehabilitated sewer. Payment shall not include pavement replacement, which if required, shall be paid separately. 3. Sewer Cleaning by Bucket Machine: Heavy cleaning requiring more than hydraulic jet cleaning shall be performed by bucket machines. The payment for such cleaning shall be included in the bid item for Pre -Construction Television Inspection of Sanitary Sewer Lines. 4. By-pass Pumping: The Contractor shall provide diversion for the flow of sewage around the section or sections of pipe designated for rehabilitation. The pumps and by-pass lines shall be of adequate capacity and size to handle all flows. All costs for by-pass pumping required during installation of the pipe shall be subsidiary to pipe enlargement. 5. Subsidiary Work: Any damage to utilities and property, resulting repairs, temporary service costs, etc. shall be borne by Contractor. Repair and/or replacement of fences, sprinkler system piping and other such restoration work resulting from Contractor activities shall be considered subsidiary to the cost of the project and no'additional payment, will be allowed. 6. Testing: All cost for testing the replacement pipe by a pressure method will be incidental to pipe installation. DA -3 THIS ITEM INTENTIONALLY DELETED: 04/16/99 ASC-10 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 0 0 0 0 0 0 a 0 0 0 0 0 0 DA -4 THIS ITEM INTENTIONALLY DELETED: DA -5 PIPE INSTALLED BY OTHER THAN OPEN CUT: A. GENERAL: 1. Furnish materials and necessary accessories, with, strengths, thickness, coatings, and fittings indicated, specified and/or necessary to complete the work. 2. All excavation shall provide arh open area conforming to the outside diameter of the casing and/or carrier conduit. The excavation shall be to an alignment and grade which will allow the carrier conduit to be installed to proper line and grade as shown on the Plans and as established in the Specifications. 3. Work shall be performed in al cordance with the requirements of the City of Fort Worth Water Department, th Texas Department of Transportation, or railroad company, as applicable. B. MATERIALS: 1. Casing Pipe: Casing pipe $hall be steel conforming to ANSI B36.10 and the following: i a. Field Strength: 35,008 psi minimum. b. Wall thickness: 0.31 � in. minimum (0.5 for railroad crossings). c. Diameter: As shown ion the drawings (minimum size requirements). d. Joints: Continuous circumferential weld in accordance with AWS D1.1. 2. Carrier Pipe in Casing: Carrier pipe shall be as shown on drawings and as specified in the General Coniract Documents. 3. Sewer Pipe without Casing ipe: Shall be minimum Class 51 ductile iron pipe, or as designated on the plans. 4. Grout: Grout shall be PdII1rtland Cement grout of min. 2000 psi compressive strength at 28 days. Propq'rtioned not less than I cu. ft. of cement to 3 Cu. ft. of fine sand with sufficient watbr added to provide a free flowing thick slurry. C. EXECUTION Where sewer pipe is requir�d to be installed under railroad embankments or under highways, streets or other, facilities in other than open cut, construction shall be performed in such a ma ner so as to not interfere with the operation of the railroad, street, highway, or other facility, and so as not to weaken or damage any embankment or structure. j During construction operations, barricades and lights to 04/16/99 Ps C-11 PRELIMINARY - FOR INTERIM REVII?W ONLY - NOT FOR CONSTRUCTION OR BIDDING v PART DA - ADDITIONAL SPECIAL CONDITIONS 0 3 04/16/99 safeguard traffic and pedestrians shall be furnished and maintained, until such time as the backfill has been completed and then shall be removed from the site. Pits and Trenches: a. If the grade of the pipe at the end is below the ground surface, suitable pits or trenches shall be excavated for the purpose of conducting the jacking or tunneling operations and for placing end joints of the pipe. Wherever end trenches are cut in the sides of the embankment or beyond it, such work shall be sheeted securely and braced in a manner to prevent earth from caving in. b. The location of the pit shall meet the approval of the Engineer. c. The pits of trenches excavated to facilitate these operations shall be backfilled immediately after the casing and carrier pipe installation has been completed. Boring and Jacking Steel Casing Pipe: Steel casing pipe shall be installed by boring hole with the earth auger and simultaneously jacking pipe into place. a. The boring shall proceed from a pit provided for the boring equipment and workmen. The holes are to be bored mechanically. The boring shall be done using a pilot hole. By this method an approximate 2 -inch hole shall be bored the entire length of the crossing and shall be checked for line and grade on the opposite end of the bore from the work pit. This pilot hole shall serve as the centerline of the larger diameter hole to be bored. Other methods of maintaining line and grade on the casing may be approved if acceptable to the Engineer. Excavated material shall be placed near the top of the working pit and disposed of as required. The use of water or other fluids in connection with the boring operation will be permitted only to the extent required to lubricate cuttings. Jetting or sluicing will not be permitted. b. In unconsolidated soil formations, a gel -forming colloidal drilling fluid consisting of at least 10 percent of high grade carefully processed bentonite may be used to consolidate cuttings of the bit, seal the walls of the hole, and furnish lubrication for subsequent removal of cuttings and installation of the pipe immediately thereafter. c. Allowable variation from the line and grade shall be as specified under paragraph A.2. All voids between bore and outside of casing shall be pressure grouted. ASC-12 v 0 I Q a v v f C a a 0 0 v 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a PART DA - ADDITIONAL SPECIAL CONDITIONS 4. Installation of Carrier Pipe in Casing: a. Sanitary sewer pipe located within the encasement pipe shall be supported by "skids" or "bands" to prevent the pipe and bells from snagging on the inside of the casing, and to keep the installed line from resting on the bells. b. All skids shall be treated with a wood preservative. Skids should extend for the full length of the pipe with the exception of the bell area and spigot area necessary for assembly unless otherwise specified. c. The Contractor shall prevent over -belling the pipe while installing it through the casing. A method of restricting the movement between the assembled bell and spigot where applicable shall be provided. d. At all bored, jacked, or tunneled installations, the annular space between the carrier pipe and casing shall be filled with grout. Care must be taken that not too much water is forced into the casing so as not to float the pipe. The backfill material will not be required unless specified on the plans and specified by the'Engineer. e. Closure of the casing after the pipe has been installed shall be plugged at the ends of the casing as shown on the drawings or as required by the Engineer. 5. Boring and Jacking Ductile Iron Pipe without Casing Pipe: a. As indicated on drawings and as required and directed by the Engineer sewer shall be constructed of bore and jacked ductile iron pipe. b. When a casing pipe is not designated on the drawings, the contractor shall provide a casing pipe if necessary to achieve line and grade. Casing pipe shall be provided at no additional cost and shall be subsidiary to the cost bid for installation By Other than Open Cut. c. Bore and jack in accordance with paragraph C.3. above. d. Short length of sewer consisting of a single pipe section may be installed by jacking without a bore hole if permitted by the Engineer and in soft soil layer. All voids outside of installed pipe shall be pressure grouted. 6. Tunneling: Where the characteristics of the soil, the size of the proposed pipe, or the use of monolithic sewer would make the use of tunneling more satisfactory than jacking or boring, or when shown on the plans, a tunneling method may be used, with the approval of the Engineer or railroad/highway officials. a. When tunneling is permitted, the lining of the tunnel shall be of sufficient strength of support the overburden. The Contractor shall submit the proposed liner method to the Engineer for approval. The tunnel liner 04/16/99 ASC-13 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING C PART DA - ADDITIONAL SPECIAL CONDITIONS design shall bear the seal of a licensed professional engineer in the State of Texas. Approval by the Engineer shall not relieve the Contractor of the responsibility for the adequacy of the liner method. b. The space between the tunnel liner and the limits of excavation shall be pressure grouted or mud -jacked. I c. Access holes for placing concrete shall be space at maximum intervals of 10 feet. D. MEASUREMENT AND PAYMENT: Installation of pipe by other than open cut will be measured by the linear foot of pipe, complete in place. Such measurement will be made between the ends of the pipe along the central axis as installed. The work performed and materials furnished as prescribed by this item will be paid for at the Contract Unit Price bid per linear foot for Pipe Installed by Other Than Open Cut of the type, size, and class of pipe specified as shown on plans. The furnishing of all materials, pipe, liner materials required for installation, for all preparation, hauling and installing of same, and for all labor, tools, equipment and incidentals necessary to complete the work, including excavation, backfilling and disposal of surplus material shall be included in the Contract Unit Price as shown in the Bid Proposal. DA -6 THIS ITEM INTENTIONALLY DELETED: C DA -7 PROTECTIVE MANHOLE COATING FOR CORROSION PROTECTION: A. GENERAL: 1. Scope: This section governs all work, materials and testing required for the application of interior protective coating. Structures designated to received interior coating are listed on the construction drawings. The structures are to be coated, including interior wall, top and bench surfaces. Protective coating for corrosion protection shall meet the requirements of this Specification (and items DA -12 and DA -13) and the Manufacturers recommendations and specifications. 2. Description: The Contractor shall be responsible for the furnishing of all labor, supervision, materials, equipment, and testing required for the completion of .protective coating of structures in accordance with manufacturer's recommendations. 3. Manufacturer's Recommendations: Materials and procedures utilized for the lining process shall be in strict accordance with manufacturer's recommendations. 4. Corrosion Protection: Corrosion protection may• Pe required on all structures where high turbulence or high H2S content is expected. 0 04/16/99 ASC-14 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING C 0 0 I 0 0 0 0 0 0 0 0 0 0 PART DA - ADDITIONAL SPECIAL CONDITIONS B. MATERIALS: 1. Scope: This section governs the materials required for completion of protective coating of designated structures. 2. Protective Coating: The protective coating shall be a proprietary two component, 100 percent solids, rigid polyurethane system designated as Spray Wall as manufactured by Sprayroq, Inc. or a two-part epoxy resin system using 100% solids based epoxy binder with fibrous and flake fillers, is manufactured by Raven Lining systems and designated as Raven 405. 3. Specialty Cement (If required for leveling or filling): The specialty cement -based coating material shall be either Quadex QM -1s as manufactured by Quadex, Inc. or Reliner MSP as manufactured by Standard Cement Materials. 4. Material Identification: The protective coating material sprayed onto the surface of the structure shall be a urethane or epoxy resin system formulated for the application to a sanitary sewer environment. The spray system shall exhibit the minimum physical properties as follows: Property Standard r Long Term Value Tensile Strength ASTM D-638 5,000 psi Flexural Stress ASTM D-790 10,000 psi Flexural Modulus ASTM D-790 550,000 psi 5. Mixing and Handling: Mixing and Handling of specialty cement material and protective coating material, which may be toxic under certain, conditions shall be in accordance with the recommendations of the manufacturer and in such a manner as to minimize hazard to personnel. It is the responsibility of the Contractor to provide appropriate protectiv4 measures to ensure that materials are under control at all times and are not a Vailable to unauthorized personnel or animals. All equipment shall be subject Ito the approval of the Engineer. Only personnel thoroughly familiar with the handling of the coating material shall perform the spray coating operations and coati g installations. C. EXECUTION: D 0 ci U 04/16/99 1. General: Protective coating shall not be installed until the structure is complete and in place. 2. Preliminary Repairs: a. All foreign materials shall be removed from the interior of the structure using high pressure water spray (3500 psi to 4000 psi at spray tip). b. All unsealed lifting holes, unsealed step holes, and voids larger than approximately one-half (1/2) inch in thickness shall be filled with patching compound as recommended by the material supplier for this application. ASC-15 j"j PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS c. repairs completed, After all have been remove all loose material. 3. Protective Coating: a. The protective coating shall be applied to the structure from the bottom of the frame to the bench, down to the top of the trough. The top of the structure shall also be coated. b. The protective coating shall be installed in accordance with the manufacturer's recommendations and the following procedure. 1) The surface shall be thoroughly cleaned of all foreign materials and matter. 2) Place covers over the invert to prevent extraneous material from entering the sewers. 3) If required for filling or leveling, apply specialty cement product to provide a smooth surface for the coasting material. 4) Spray the urethane or epoxy onto the structure wall and bench/trough to a minimum uniform thickness of 125 mils (0.125 inches). Thickness to be verifiable through the use of methods acceptable to the Engineer. After the walls are coated, the wooden bench covers shall be removed. 5) The final application shall have a minimum of three (3) hours cure 'time or be set hard to the touch, before being subjected to active flow. 6) No applications shall be made to frozen surfaces or if freezing is expected to occur inside the structure within 24 hours after application. 4. Testing of Rehabilitated Manholes: Testing of rehabilitated manholes for watertightness shall be performed by the Contractor after operations are complete in accordance with the Section D-63 - VACUUM TESTING OF SANITARY SEWER MANHOLES. D. MEASUREMENT AND PAYMENT: Payment shall be based on the Contract Unit Price Bid per vertical foot, measured from the bottom of the frame to the top of the bench. The Contract Unit Price shall be payment in full for performing the work and for furnishing all labor, supervision, materials, equipment and material testing required to complete the work. Pressure grouting, if necessary to stop active infiltration prior to application of the protective coating, shall be included in the above unit price. Grouting of the pipe seals, bench and trough, and lower portion of a,. particular structure, if required by the Engineer, shall be paid for separately, as specified in Section DA -8, MANHOLE REHABILITATION. 04/16/99 AS C-16 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING o U PART DA - ADDITIONAL SPECIAL CONDITIONS DA -8 MANHOLE REHABILITATION: A. GENERAL 1.. Scope. This section covers the rehabilitation of sanitary sewer manholes and other a appurtenances in accordance with the Manhole Rehabilitation Details in the specifications. The rehabilitation requirements for each manhole are listed in the Manhole Rehabilitation Schedule in the specifications. Manhole rehabilitation includes pfl repairing, replacing, or restoring manhole frame & cover, frame seal, chimney, corbel, wall, bench, invert and/or pipe seal(s). fl The Contractor shall furnish all labor, supervision, materials, equipment and testing O required to complete the rehabilitation of the manholes listed in these Contract Documents. 0 2. General: Contractor is responsible for locating all manholes scheduled for rehabilitation. Contractor shall notify City Engineer if a manhole cannot be located. fl a Contractor shall contact City Engineer to determine if materials removed from rehabilitated manholes will remain the property of the Owner. If so, Contractor shall coordinate when and where to deliver salvaged material to the Fort Worth Water fl Department. If not, Contractor shall be responsible for disposal of. material. Contractor Li shall provide watchmen, barricades and warning signs to protect his workers, inspectors, and the public. Contractor shall, at no additional cost to the Owner, replace any portion of an existing manhole that is damaged during rehabilitation of the manhole. Contractor shall provide necessary means to prevent wastewater flow from contacting material used for rehabilitation prior to fully curing. Loose and broken brick and mortar shall be removed immediately from the manhole to eliminate the possibility of pieces aentering the sewer lines. 0 0 0 0 0 0 0 3. Submittals: 04/16/99 a. Product Information. Contractor shall submit manufacturer's information on products proposed to be used that are not specifically named in the Contract Documents. b. Personnel Qualifications. Prior to starting manhole coating, Contractor shall submit qualifications of personnel that will be performing wall repairs and coating procedures. Proposed personnel shall verify certification within the last two years by the coating manufacturer and verify working on' at least three projects with similar coating within the previous 12 months. c. Work Schedule. Prior to beginning work on bench and invert replacements, complete manhole replacements, or construction of'new maintenance manholes, Contractor shall submit for review by Owner's Representative a plan for maintaining wastewater flow without any interruptions. Contractor shall maintain wastewater flow at all times. ASC-17 aPRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS 4. Quality Assurance. Contractor will be responsible for all testing laboratory services in connection with data required for review of materials proposed to be used in the Work. Contractor 'shall obtain Engineer's acceptance of the testing laboratory before having services performed and shall pay for all costs for testing. Owner may, at his discretion, perform quality control tests on materials during and after their incorporation in the Work. If any of these tests fail, Contractor will be responsible for correcting situation and shall pay for any retest. All costs for- quality assurance testing will be subsidiary to the Work. 5. Delivery, Storage, and Handling. Upon delivery, all material shall immediately be stored and protected until installed in the Work. All material shall be labeled and stored in accordance to the manufacturer's recommendations and all local, state, and federal regulations. 6. Testing. All rehabilitated manholes shall be tested in accordance with Section D-63. Q 04/16/99 MATERIALS 1. Cleaners: Water Clean and free from deleterious. substances. Cleaners Detergent, muriatic acid or approved equal. 2. Wall Bench Trough. Grouting, and Pipe Seal Repair Hydraulic Cement Strong -Seal Plug, Penny Grout, IPA "Octocrete", or approved equal. Quick -setting Mortar Strong -Seal QSR, Rapid Set, or approved equal. Urethane Gel Grout Scotch -Seal "5610 and 5612" or approved equal. Cementitious Grout Material Sauereisen Cements "F-100 Grout" or approved equal. Activated Oakum 3M Scotch Seal "5600" or approved equal. Two -Part Epoxy Adhesive Coating American. Chemical Corp. "Aquatapoxy" or approved equal. Concrete Bonding Agent ThoroSeal "Ac'ryl 60" or approved equal. Concrete Material in accordance with City of Fort Worth Water Department General Contract Documents. 3. External Manhole Coating Coal Tar 4. Internal Manhole Coatings Non-cementitious ASC-18 Tnemec "46-450 Heavy Tnemecol", Kop Coat "Bitumastic Black Solution", or approved equal. Sprayroq "Spray Wall" or Raven 405. PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS. 0 Cementitious 5. Frames. Covers, and Inserts. t..! Manhole Frames and Covers 0 0 0 ci ci 0 0 ci 0 ci 0 0 0 Watertight Manhole Frames and Covers Manhole Insert — Polyethylene Manhole Insert - Stainless Steel 6. Fiberglass Manhole Liner 7. PVC Lined Concrete Wall Reconstruction 8. Joint Material Adjustment Rings Bitumastic Gasket Material Bitumastic Trowelable Material 9. Miscellaneous Root inhibitor C. EXECUTION Standard Cement Materials "Reliner MSP" or Quadex "QM -1 s". McKinley "Type N with indented top", Neenah "R1726A", or approved equal. Neenah "R1915 -E, Type L" or approved equal. Corrosion -proof high density polyethylene, 1/8" thick in accordance with Fort Worth Water Department General Standards E100- 4. Southwestern Packing & Seals, Inc., "TetherLok". Material in accordance with Section DA -15 of these specifications. Material in accordance with Section DA -16 of these specifications. Single -piece, precast concrete, ASTM C478, 2" min. thickness. RAM-NEK, EZ-STIK or approved equal. GS -702 compound or approved equal. Dichlobenil 2,6 - dichlorobensonitrile, or approved equal. 1. Inspection. Prior to beginning the Work on a manhole, the Contractor shall inspect the manhole and notify City Engineer if actual conditions are in conflict with Manhole Rehabilitation Schedule. After City Engineer revises schedule, Contractor shall commence with Work. 2. Manhole Rehabilitation Repairs. Each manhole listed in the Manhole Rehabilitation Schedule will be repaired with at least one of the following repair methods. The requirements for each repair shall be completed as described in this section and as indicated on the Manhole Rehabilitation Details in the specifications. 0 0 04/16/99 a. Cover/Frame/Frame Seal Replacement. 1) Paved Areas: Make square full depth saw cut and remove the pavement to expose the entire manhole frame and exterior of manhole a minimum of 6 inches below the top of the structurally sound structure, keeping trench ASC-19 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS sides as vertical as possible. Remove the pavement by breaking out from saw cut toward the manhole to avoid breaking the frame. Non -paved Areas: Excayate adjacent to the manhole to expose the entire frame to a minimum depth of 6 inches below the top of the structurally sound structure, keeping trench sides as vertical as possible. Limit excavation to a 6 -foot by 6 -foot working area. 2) Remove and replace the existing frame, cover, and sealing material. Furnish bolt down frame and cover, if required by Manhole Rehabilitation Schedule in the Specifications. If grade rings are broken, deteriorated, or loose, Contractor shall notify Engineer prior to placing manhole frame. Also, if manhole contains„ brick grade adjustments on top of concrete corbel or chimney, Contractor shall replace the brick grade adjustments with precast concrete rings in accordance with manhole grade ring replacements., 3) Clean exposed interior and exterior surfaces of the existing chimney and inspect for reuse. Wire brush and apply a concrete bonding agent and quick setting hydraulic cement to the top surface of the manhole to provide a smooth surface prior to installing new grade rings and bitumastic material. 4) Surfaces between the frame, adjustments, and corbel sections shall be free of dirt and debris. Bitumastic gasket material (minimum Y2 inch thick) shall be placed in two concentric rings along the inside and outside edge of each joint or use bitumastic trowelable material. Butt joints of the two rows of bitumastic material shall be positioned opposite of each other. No steel shims, wood, stones, or any material not specifically accepted by the Engineer may be used to obtain final surface elevation of the manhole frame. 5) In paved areas, frames shall be installed so the top of the casting will conform to the slope and finish elevation of the paved surface. Allowances for the compression of the bitumastic material shall be made to assure a proper final grade elevation. Manhole rims in parkways, lawns, or other improved lands shall be at an elevation not more than one (1) inch nor less than one-half (1/2) inch above the surrounding ground. Backfill shall provide a uniform slope from the manhole frame for not less than three (3) feet each direction to existing ground elevations. 6) In drainage areas, frames shall be installed so the top of the casting will be at the same elevation that existed prior to rehabilitating the manhole. 7) If the inside diameter of the manhole is too large to safely support new grade adjustments or frame, the corbel shall be replaced or a flattop installed prior to placing frame. 04116/99 ASC-20 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a PART DA - ADDITIONAL SPECIAL CONDITIONS 8) The exposed, exterior surfaces of manhole corbel, chimney, and frame shall be wire brushed and coated with two coats of coal tar, 14 mils DFT. The grade adjustments shall be wrapped with a 6 mil polyethylene sheet. 9) In unpaved areas, backfill with excavated material and compact with mechanical equipment. In paved areas, backfill with granular material meeting requirements of Item 402 and Section E1-2 to the limits shown on figures in Section H. 10) A concrete collar shall be constructed in accordance with Figure 121. Concrete collars will be required on rehabilitated manholes and new replacement manholes as listed in the manhole rehabilitation schedule. Construction of concrete collar will be paid for separately for each manhole and shall include surface restoration (including seeding/sodding) and permanent pavement repair. Repair of pavement outside of 4 foot by 4 foot concrete collar shall be equal to or superior in composition, thickness, etc., to existing pavement and/or as detailed in the Transportation and Public Works Department typical sections for Pavement and Trench Repair for Utility Cuts, Figures 1 through 5. Non-standard concrete collars shall be constructed at locations authorized by the Engineer. b. Reseating/Sealing of Existing Frame - Work shall be done in accordance with Section D-52, with the exception that the existing frame shall be reused. The frame and cover shall be inspected for any defects and notify the Owner's representative if it is damaged or deteriorated. All scale, dirt, and debris shall be removed from the existing casting with a wire brush. c. Grade Adjustment - All Work shall be done in accordance with Section D-52, with the exception that the existing frame shall be raised or lowered to surrounding surface elevations in accordance with the Grade Adjustment Detail. 1) In brick manholes, remove and replace the defective chimney up to a maximum of 24 inches below the frame. If chimney is defective below 24 inches, Contractor shall notify Engineer prior to completing manhole rehabilitation. 2) Existing defective concrete grade ring adjustments and all brick or block adjustments shall be replaced with precast concrete adjustment rings. 3) Where partial manhole replacement is required on the Manhole Rehabilitation Schedule, the following shall apply: a) The extent of partial manhole replacement shall be based on the depth of deterioration as determined by the Owner's Representative. The remaining structure shall be capable of supporting the newly constructed portions of the manhole. 0,4/16/99 ASC-21 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS b) Excavate the work area to expose the entire depth of deterioration in the existing manhole to a minimum depth of 6 inches below the top of structurally -sound structure. c) Perform reconstruction to allow easy access into the manhole. No more than 12 inches of depth of precast concrete grade adjustment rings shall be allowed to obtain proper grade. Perform reconstruction in accordance with the Partial Manhole Replacement Detail. d) Seal manhole joints in accordance with Section D-52. e) Precast corbel, or barrel sections may be used as necessary. The diameter of the precast sections shall be consistent with the existing remaining structure. Place a flattop section on existing manhole structure prior to setting precast sections. Flattop sections shall not overhang exi-sting manhole structures by more than 6 inches. If the clearance from the underside of the proposed flattop to the manhole invert is less than 4 Y2 feet, the manhole shall be completely replaced. f) Partial Manhole Replacement shall also include replacement of frame, cover,'and sealing of frame .and grade adjustments. g) Remove all debris from reconstruction from the manhole and dispose of properly. d. Interior Manhole Coating - Interior manhole coating shall meet the requirements of Section DA -1 0, DA -1 1, DA -1 2, or DA -1 3. e. Bench and Invert Rehabilitation 1) Remove existing deteriorated bench and invert material to so'id material. Care shall be taken to avoid allowing broken pieces of brick and mortar to enter the sewer lines. 2) Apply concrete bonding agent and quick setting concrete to form a smooth surface and continuous invert with the sewer pipe. New bench and invert shall be formed ° in accordance with repair Bench and Invert Rehabilitation Detail. f. Bench and Invert Replacement 1) Remove the existing bench and trough completely. If the existing trough is formed of sewer pipe laid continuously through the manhole, special care shall be. taken to ensure that the pipe seal and the sewer pipe to remain is not damaged. Contractor shall, at no additional cost, replace any portion of 04/16/99 AS C-22 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS the existing manhole or sewer pipe to remain that is damaged during bench and invert replacement. 2) Install new bench and trough with Class A concrete in accordance with repair detail. Surface shall be troweled smooth and the invert of the trough shall form a continuous smooth flow path from ,pipes entering the manhole to where they exit. The bench and invert shall form a watertight seal with the manhole wall, pipe, and bench/trough area. 3) If the manhole base is deteriorated or nonexistent, the minimum thickness of the bench/trough shall be six inches. g. Removal of Existing Manhole - Work shall be conducted as specified in Section D- 55. h. Construct New Manhole 1) Completely remove the existing manhole structure. 2) Construct new manhole in accordance with Section D-52 of these specifications. Connect to existing sewers using flexible couplings. 3) Contractor shall maintain existing wastewater flows at all times. Contractor shall submit a plan for maintaining wastewater flows to the Engineer prior to beginning work. i. Pressure Grout Pipe Seals, Bench and Trough, and Lower Portion of Manhole 1) All work shall be done in accordance with Section DA -17 of these specifications. 2) Remove all foreign materials from the manhole walls around the pipe seal and within the pipe seal itself, including all loose and protruding brick, mortar and concrete. Stop active leaks using products specifically for that purpose. 3) Remove deteriorated area of the pipe seal to sound material. Apply bonding agent to area and place hydraulic cement to fill voids to form a watertight seal around pipe. 4) Drill holes around the pipe seal, bench/trough and lower portion of the manhole and inject urethane gel grout into holes in accordance with repair detail. Activated oakum rope shall be used to fill the injection hole after removal of the grouting probe. Patch the injection hole with hydraulic cement and apply a water resistant two-part epoxy coating to the patch. Clean all grout from interior of manhole. 04/16/99 ASC-23 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS Manhole Step Removal - Remove existing manhole steps and fill voids with hydraulic cement in accordance with repair detail. k. Patch Holes - Clean and remove loose debris from holes to be patched. Apply bonding agent to surface of holes and fill voids with hydraulic cement in accordance with repair Patch Holes Detail. Watertight Manhole Insert - Install watertight gasketed manhole inserts as specified in Fort Worth Water Department Standard El 00-4. m. Grout Flattop to Wall Joint - Injection holes shall be drilled through the manhole at 90 degree angles from each other within 4 inches of the bottom of the flattop. Provide additional holes near observed defects, if necessary. Urethane gel, grout shall be injected through the holes under pressure with a probe designed for this purpose. Injection pressure shall not cause damage to the manhole structure or surrounding surface features. Grouting from the ground surface will not be allowed. Grout travel shall be verified by observation of grout at defects or adjacent injection holes. Provide additional injection holes, if necessary, to ensure grout travel. Injection holes shall be cleared with a drill and patched with a waterproof quick setting mortar. The flattop to wall joint shall be pressure washed, cleaned, filled with a non -shrink grout, and finished smooth. n. Fiberglass Manhole Insert - Work shall be conducted as specified in Section DA -1 5 . o. PVC Lined Concrete Wall Reconstruction - Work shall be conducted as specified in Section DA -16. p. Point Repair to Replace Sewer Line, 6"-15" Diameter - This item shall apply at those locations indicated in the Manhole Rehabilitation Schedule and those additional locations authorized by the Engineer. The Contractor shall, excavate adjacent to the manhole to uncover the damaged sewer pipe. This pipe shall be carefully removed from the manhole to the first sound joint (maximum of 5 feet) of pipe. This pipe shall be replaced with SDR 35 PVC pipe of the same nominal size. This pipe shall be connected to the existing sewer using flexible connectors approved by the City. The connection of the new pipe to the manhole shall be made using flexible gaskets meeting the requirements of ASTM C-923, grouted into the manhole wall using non -shrink grout. Embedment material shall be installed around the pipe up to the pipe springline. Backfill material conforming to City specifications shall be placed and compacted as required. This item shall include surface restoration and permanent pavement repair. q. Bypass Pumping - The Contractor shall furnish and operate pumping equipment and piping as required for bypass pumping necessary to complete any manhole replacement or rehabilitation work. 04/16/99 ASC-24 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 0 D. MEASUREMENT AND PAYMENT fl 1. Frame and Cover Replacement: Payment for installation of new manhole frames and covers shall be based on the Contract unit price and the actual quantity installed. The Contract unit price shall be full payment for the new manhole frame fl and cover, excavation, installation of the manhole frame and cover, minor grade adjustment, backfill, and demolition and disposal of waste materials. 0 0 0 0 0 I 0 0 0 I I I� 0 0 04/16/99 2. Grade Ring Replacement: Payment for installation of new grade rings shall be based on the Contract unit price and the actual quantity of new grade rings installed. The Contract unit price shall be full payment for the new grade rings. All costs for installing and sealing grade rings shall be included in the applicable Contract unit price for sealing of frame and grade rings. 3. Paved Frame and Grade Adjustment Sealing: Payment for sealing manhole frames and grade adjustment rings in paved areas shall be based on the Contract unit price and the actual number of manholes where sealing of the manhole frame and/or grade adjustments in paved are required. The Contract unit price shall be full payment for excavation, pavement removal, sealing materials, installation of grade rings, sealing, minor grade adjustment, backfill, pavement restoration, and demolition and disposal of waste materials. 4. Non -Paved Frame and Grade .Adjustment Sealing: Payment for sealing manhole frames and grade adjustment rings in non -paved areas shall be based on the Contract unit price and theactual number of manholes where sealing of the manhole frame and/or grade adjustments in non -paved are required. The Contract unit price shall be full payment for excavation, sealing materials, installation of grade rings, sealing, minor grade adjustment, backfill, surface restoration, and demolition and disposal of waste materials. 5. Interior Manhole Coating: Payment for interior manhole coating shall be based on the Contract unit price where interior manhole coating is applied. The Contract unit price shall be full payment for surface preparation, interior coating of the corbel, wall and bench, and cleanup. 6. Pressure Grout Pipe Seals, Bench and Trough, and Lower Portion of Manhole: Payment for grouting pipe seals, bench and trough, and lower portion of the manhole shall be based upon the Contract unit price and the actual quantity of manholes where pipe seals, bench and trough and lower portion of the manhole were grouted. The Contract unit price shall be full payment for the preliminary repairs, rehabilitating the pipe seals, grout material, installation of the grout materials and cleanup. 7. Bench and Invert Rehabilitation_ Payment for bench and invert rehabilitation shall be based upon the Contract unit price and the actual number of manholes where the bench and invert were rehabilitated. The Contract unit price shall be full payment for materials and bench and invert rehabilitation. ASC-25 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS 8. Bench and Invert Replacement: Payment for bench and invert replacement shall be based upon the Contract unit price and the actual quantity of manholes where the bench and invert were replaced. The Contract unit price shall be full payment for materials, installation of materials, and demolition and disposal of waste materials. 9. Patch Holes: Payment for patchingholes shall be based upon the Contract unit price and the actual number of manholes that were patched. The Contract unit price shall be full payment for surface preparation, patching of the holes, and cleanup. This item is allowed for payment only when it is included in the Manhole Rehabilitation Schedule. Patching holes prior to interior coating of manholes is not a pay item. 10. Manhole Step Removal: Payment for manhole step removal shall be based upon the Contract unit price per manhole and the actual number of manholes that had steps removed. The Contract unit price shall be full payment for removal and disposal of the steps and patching of the voids created by step removal. 11. Watertight Manhole Insert: Payment for watertight manhole inserts of the respective type shall be based upon the Contract unit price and the actual number of inserts of each type installed. The Contract unit price shall be full payment for the watertight manhole insert and installation of the insert in the manhole. 12. New Sanitary Sewer Manhole: Payment shall be made as indicated in Measurement and Payment, Section D-52 in these specifications. This item shall include up to five (5) linear feet of new PVC pipe at each manhole pipe connection and connecting to the existing sewer. 13. Concrete Manhole Collars: a. Paved Areas. Payment for manhole collars in paved areas shall be based on the Contract unit price and the actual quantity installed. The Contract unit price shall be full payment for labor, materials, pavement sawing, excavating, disposal of waste materials, and permanent pavement repair. b. Non -Paved Areas. Pavement for manhole collars in non -paved areas shall be based on the Contract unit price and the actual quantity installed. The Contract unit price shall be full payment for labor, materials, excavation, disposal of waste materials, and surface restoration. 14. Partial Manhole Replacement: Payment for partial manhole replacement shall be based on the Contract unit price per vertical foot measured from the top of the frame to the top of the structurally sound existing manhole. The Contract unit price shall be full payment for furnishing all labor and materials necessary, iricluding excavation and removal of the existing structure, replacement of the frame and cover, installation of new adjustment rings, flattop, corbel or wall sections, sealing, backfilling, and surface restoration. 04/16/99 ASC-26 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a f PART DA - ADDITIONAL SPECIAL CONDITIONS 15. Interior Corrosion Protection: Payment shall be made as indicated in Measurement and Payment, Section DA -7 in these specifications. 16. Grout Flattop to Manhole Wall Joint: Payment for grouting the flattop to manhole wall joint shall be based upon the Contract unit price and the actual number of fl joints grouted. The Contract unit price shall be full payment for all material, labor LI and cleanup required to complete each joint grouting. fl 17. Fiberglass Manhole Insert: Payment shall be made as indicated in Measurement and Payment, Section DA -1 5 in these specifications. fl 18. PVC Lined Concrete Wall Reconstruction: Payment shall be made as indicated in Measurement and Payment, Section DA -16 in these specifications. I -I 19. Point Repair to Replace Sewer Line, 6" - 15" Diameter: Payment for each point U repair shall be based upon the Contract unit price for each manhole connection actually repaired. The Contract unit price shall be full payment for all material, labor, and cleanup required to complete each manhole connection repair. 20. Flattop Replacement: Payment for each flattop replacement shall.be based on the Contract unit price for each flattop actually replaced. The Contract unit price shall be payment in full for all labor, material, and cleanup required to complete each flattop replacement. Payment for frame and cover replacement, grade rings, sealing, and concrete manhole collar as required to complete the manhole rehabilitation will be paid for separately at the applicable Contract Unit Prices. 21. Bypass Pumping: All bypass pumping shall be a subsidiary obligation of the UContractor. All costs for bypass pumping shall be included in the Contract unit price for the items requiring bypass pumping. DA -9 SURFACE PREPARATION FOR MANHOLE REHABILITATION: A. GENERAL: This item shall govern the preparation of surfaces for manhole rehabilitation. B. CLEANING: Q 1. Covers (screens) shall be placed over the pipe inverts to prevent extraneous material from entering the sewer system. fl 2. All concrete that is not sound or has been damaged by chemical exposure shall be Li removed from the manhole. Loose and protruding brick, mortar and concrete shall be removed using a masonry hammer and chisel and/or scrapers. Existing roots and manhole steps shall be removed by cutting them flush with the wall of the 'manhole. U 3. All contaminates including but not limited to: oils, grease, waxes, form release, curing compounds, efflorescence, sealers, salts, incompatible existing coatings, and all other contaminants shall be removed. j04/16/99 ASC-27 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS 4. Surfaces to receive protective coating shall be cleaned and abraded to produce a sound concrete/brick surface with adequate profile and porosity to provide a strong bond between the protective coating and the substrate. All foreign materials shall be removed from the manhole interior using high pressure water spray (3500 psi to 4000, psi). Cleaning equipment shall have a pressure gauge that indicates the water pressure being used. 5. Detergent water cleaning, muriatic acid, and hot water blasting shall be used, if necessary, to remove dirt, oils, grease, and other matter which may prevent a good bond of sealing material to the manhole surface. A mild chlorine solution (household bleach) may be used to neutralize the surface to diminish microbiological bacteria growth prior to final rinse and coating. C. D. E PRELIMINARY REPAIRS All unsealed lifting holes, unsealed step holes, voids larger than approximately one- half (1/2) inch in thickness shall be filled with patching compound at least one hour (1) prior to application of the first spray coat. 2. Active leaks shall be stopped using City approved products specifically for that purpose and according to manufacturer's recommendation. Some leaks may require grouting to stop the inflow. Grouting shall be performed in accordance with City specifications and Section DA -17- PRESSURE GROUTING. 3. Bench area shall be built up if required to provide a uniform slope from the circumferences to the manhole trough. City approved cementitious patching compounds or epoxy grout as recommended by manufacture shall be used. 4. After all repairs have been completed, all loose material shall be removed from the manhole. Contractor shall insure no material is allowed to enter the sewer system. 5. Contractor shall ensure the manhole is clear of all detergents and cleaners and that all active infiltration has been stopped prior to application of protective manhole coatings for rehabilitation. INSPECTION Applicator shall carefully inspeEt all surfaces prior to application of protective coating and shall notify Owner of any noticeable disparity in the surface which may interfere with the proper performance of the repair mortar and protective coating. MEASUREMENT AND PAYMENT Payment for Surface Preparation shall be considered subsidiary to the cost for Interior Manhole Coating or Protective Manhole Coating for Corrosion Protection. DA -10 THIS ITEM INTENTIONALLY DELETED: 04/16/99 ASC-28 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS aDA -11 THIS ITEM INTENTIONALLY DELETED: fl DA -12 INTERIOR MANHOLE COATING - SPRAY WALL SYSTEM: A. GENERAL a1. Scope This section governs all work, materials and testing required for the application of interior manhole coating. Manholes designated for interior coating are listed on the Manhole Rehabilitation Schedule. Interior manhole coating shall meet the fl requirements of this Section or of Section DA -10, DA -1 1, DA -1 3, or DA -1 4. 2. Description The Contractor shall be responsible for the furnishing of all labor, supervision, materials, equipment, and testing required for the completion of interior coating of manholes in accordance with the 6ontract Documents. 3. Manufacturer's Recommendations Materials, mixture ratios, and procedures utilized for the coating process shall be in accordance with manufacturer's recommendations. fl 4. Manholes Manholes to be coated are of brick, block, or concrete construction. All manholes shall have a minimum of one-half (1/2) inch specialty cement -based coating material (Quadex QM -1s or Reliner MSP) sprayed or trowelled on coating over the original interior surface. Li B. MATERIALS a1. Scope This section governs the materials required for completion of interior • coating of fl manholes. 2. Interior Coating aThe interior coating shall be a proprietary two component, 100 percent solids, rigid polyurethane system designated as Spray Wall as manufactured by Sprayroq, Inc. 3. Specialty Cement The specialty cement -based coating material shall be either Quadex QM -1 s as manufactured by Quadex, Inc. or Reliner MSP as manufactured by Standard Cement Materials. 04/16/99 ASC-29 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 4. 5. Material Identification The interior manhole coating material sprayed onto the surface of the manhole shall be a urethane resin system formulated for the application to a sanitary sewer environment. The spray system shall exhibit the physical properties as follows: Property Tensile Strength Flexural Stress Flexural Modulus Mixing and Handling Standard ASTM D-638 ASTM D-790 ASTM D-790 Long Term Value 5,000 psi 10,000 psi 550,000 psi Mixing and handling of specialty cement material and interior coating material, which may be toxic under certain conditions shall be in accordance with the recommendations of the manufacturer and in such a manner as to minimize hazard to personnel. It is the responsibility of the Contractor to provide appropriate protective measures to ensure that materials are under control at all times and are not available to unauthorized personnel or animals. All equipment shall be subject to the approval of the Engineer. Only personnel thoroughly familiar with the handling of the coating material shall perform the spray coating operations and coating installations. C. EXECUTION 1. General Manhole coating shall not be installed until sealing of manhole frame and grade adjustments, or partial manhole replacement when required for the manhole per the Manhole Rehabilitation Schedule, is complete. 2. Temperature Normal interior coating operation shall be performed at temperatures of 40°F or greater. No application shall be made when freezing is expected within 24 hours. 3. Interior Manhole Coating 0 a. The interior coating shall be applied to the manhole from the bottom of the frame to the bench, down to the top of the trough. b. The interior coating shall be installed in accordance with the manufacturer's recommendations and the following procedure. 1) The surface shall be thoroughly cleaned of all foreign materials and matter. Cleaning shall be accomplished by using high pressure water spray (minimum 3500 psi at spray tip), cleaning with muriatic acid, 04/16/99 ASC-30 ' 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a PART DA - ADDITIONAL SPECIAL CONDITIONS degreaser, or other solvents as needed in order to remove any film or residue on the surface. 2) Place covers over the invert to prevent extraneous material from entering the sewers. 3) Apply a minimum of one-half (1/2) inch specialty cement product (Quadex QM -1s or Reliner MSP) smooth surface for the urethane 9 coating material. 4) Spray the urethane onto the manhole wall and bench/trough with a fl minimum thickness of 125 mils (0.125 inches). Thickness to be verifiable through the use of methods acceptable to the Engineer. fl 5) Coat trough area with specialty cement product (Quadex QM -1s or Reliner MSP). fl 1. Testing of Rehabilitated Manholes a. Testing of rehabilitated manholes for watertightness shall be performed by the Contractor after operations are complete in accordance with Section DA- lI DD. MEASUREMENT AND PAYMENT Payment shall be based on. the Contract Unit Price per vertical foot, measured from the bottom of the frame to the top of the bench. The Contract Unit Price shall be payment in full for performing the work and for furnishing all labor, supervision, materials, equipment and material testing required to complete the work. Grouting, if necessary, shall be included in the above unit price. Grouting, of the pipe seals, bench and trough, and lower portion of a particular manhole, if required by Manhole Rehabilitation Work Schedule or required to be done by the Engineer, shall be paid for separately at the Contract Unit Price. 9 DA -13 INTERIOR MANHOLE COATING - RAVEN LINING SYSTEM: A. GENERAL 11 1. Scope Q D 0 0 04/16/99 This section governs all work, materials and testing required for the application of interior manhole coating. Manholes designated for interior coating are listed of the Manhole Rehabilitation Schedule, listed in Section I. Interior manhole coating shall meet the requirements of this Section, or of Section DA -10, DA -11, DA -12, or DA -14. ASC-31 rr PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 2. Description D The Contractor shall be responsible for the furnishing of all labor, supervision, materials, equipment, and testing required for the completion of interior coating of manholes in accordance with the Contract Documents. 3. Manufacturer's Recommendations Materials, mixture ratios, and procedures utilized for the coating process shall be in accordance with manufacturer's recommendations. 4. Manholes Manholes to be coated are of brick, block, or concrete construction. All manholes shall have a minimum of one-half (1/2) specialty cement -based coating material (Quadex QM -1s or Reliner MSP) sprayed or trowelled on coating over the original interior surface. B. MATERIALS 1. Scope This section governs the materials required for completion of interior coating of manholes. 2. Interior Coating Raven Ultra High -Build epoxy Coating, a two-part epoxy resin system using 100% solids based epoxy binder with fibrous and flake fillers, is manufactured by Raven Lining systems and designated as Raven 405. 3. Spedialty Cement The specialty cement -based coating material shall be either uadex QM -1s as manufactured by Quadex, Inc. or Reliner MSP as manufactured by Standard Cement Materials. 4. Material Identification Contractors will completely identify the types of grout, mortar, sealant, and/or root control chemicals proposed and provide case histories of successful use or defend the choice of grouting materials based on chemical and physical properties, ease of• application, and expected performance. These grouting materials shall be compatible with Raven 405 interior coating. The contractor shall be responsible for getting approval from Raven Lining systems and/or the grout manufacturers for the use of these grouting materials. 04/16/99 ASC-32 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING Q Ln PART DA - ADDITIONAL -SPECIAL CONDITIONS 5. Mixing and Handling Mixing and handling of interior coating, which may b2 toxic under certain conditions shall be in accordance with the recommendations of the manufacturer and in such a manner as to minimize hazard to personnel. It is the responsibility of the Contractor to provide appropriate protective measures to ensure that materials are under control at all times and are not available to unauthorized personnel or animals. All equipment shall be subject to the approval of the Engineer. Coating. shall be performed only by certified applicators approved by the manufacturers. C. EXECUTION D1. General D Manhole coating shall not be performed •until sealing of manhole from frame and grade adjustments, partial manhole replacement, manhole grouting or sewer replacement/repairs are complete. a2. Temperatures 0 Normal interior coating operation shall be performed at temperatures of 40°F or greater. No application shall be made when freezing is expected within 24 hours. 3. Interior Manhole Coating a. Manholes scheduled for interior coating are shown on the Manhole Rehabilitation Schedule. The interior coating shall be applied to the manhole from the bottom of the manhole frame to the bench/trough, including the bench/trough. b. The interior coating shall be installed in accordance with the manufacturer's recommendations and the following procedure. fl1) The surface preparation shall comply with the requirements of Section DA -9, SURFACE PREPARATION FOR MANHOLE RESTORATION. 0 2) Apply a minimum of one-half (1/2) inch specialty cement -based product (Quadex QM -1s or Reliner MSP) smooth surface for the afl urethane coating material. 3) The surface prior to application may be damp but shall not have noticeable free water droplets seeping or running water. Material fl shall be spray applied per manufacturer's recommendations with a minimum thickness of 125 mils (0.125 inch). fl 4) After the walls ,are coated, the wooden bench covers shall be removed and the bench sprayed to the, same average and minimum thickness as required for the walls. fl04/16/99 ASC-33 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS 5) The final application shall have a minimum of three (3) hours cure �+ time or be set hard to the touch, before being subjected to active flow. 6) No applications shall be made to frozen surfaces or if freezing is expected to occur in side the manhole within 24 hours after application. 0 4. Testing of Rehabilitated Manholes a. After the epoxy liner has set (hard to touch), all visible pinholes shall be 0 repaired. Repairs shall be made by lightly abrading the surface and brushing the lining material over the area. All blisters and evidence of uneven cover shall be repaired according to the manufacturer's recommendations. Spot check of coating thickness may be made by Owner's Representative, and the contractor shall repair these areas as required, at no additional cost to the Owner. b. Testing of rehabilitated manholes for watertightness shall be performed by the Contractor after operations are, complete in accordance with Section DA - 18 —VACUUM TESTING OF REHABILITATED MANHOLES. D. MEASUREMENT AND PAYMENT Payment shall bebased on the Contract Unit Price per vertical foot, measured from the bottom of the frame to the top of the bench. The Contract Unit Price shall be payment in full for performing the work and for furnishing all labor, supervision, materials, equipment all testing necessary to complete the work. Payment for grouting of pipe seals, bench and trough and manhole walls shall bebased on the Contract Unit Price for each manhole actually grouted. DA -14 THIS ITEM INTENTIONALLY DELETED: DA -15 THIS ITEM INTENTIONALLY DELETED: DA -16 THIS ITEM INTENTIONALLY DELETED: DA- 17 THIS ITEM INTENTIONALLY DELETED: DA -18 THIS ITEM INTENTIONALLY DELETED: DA -19 VACUUM TESTING OF REHABILITATED MANHOLES: A. GENERAL 1. Scope. This section describes manhole testing to effectively confirm the watertight integrity of existing manholes following structural ,infiltration and inflow related repairs and that the appearance of the work is acceptable. 04/16/99 ASC-34 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a 0 PART DA - ADDITIONAL SPECIAL CONDITIONS a2. Description: a. Infiltration may be observed in manhole defects at manhole walls, pipe seals Qfl or bench/trough areas. Infiltration related -repairs are intended to eliminate leakage of groundwater into manholes. b. Inflow may be observed in manhole defects at manhole frames, covers, frame seals, grade adjustments, grade adjustment seals, corbels, or walls. fl Inflow related repairs are intended to eliminate sources of surface water entry Li that become active during rainfall events. c. Structural repairs may be required when making I/I related manhole repairs. Structural repairs may include defects in any manhole components but not displaying I/I. 3. Testing, Observations and Guarantee Periods: a. The testing required shall be performed by the Contractor at locations D designated by the Engineer and documented to the satisfaction of the Engineer. Ui b. Any new or rehabilitated manholes that are observed to be leaking by the Engineer during periods of high groundwater or during inflow conditions shall be subject to additional repairs. The Contractor shall be responsible for all additional repairs required on these unsatisfactory manholes during the guarantee period. D c. All manhole rehabilitation work shall be warranted to be free of defects and of good workmanship for a minimum of three (3) years from the date of final acceptance of the project. Any manhole repairs completed by the Contractor which fail during the warranty period shall be repaired to the satisfaction of the City at no additional cost to the City. B. MATERIALS - Not specified. C. EXECUTION 1. Infiltration Testing_ fl a. All interior coated manholes and all partial replacement manholes shall be observed (tested) by the Contractor in the presence of the Engineer for sources of infiltration. Observations will be made during high groundwater conditions, wherever possible. b. Manholes shall be tested after installation with all connections (existing fl and/or proposed) in place. Drop -connections and gas sealing connections Li shall be installed prior to testing. The lines entering the manhole shall be temporarily plugged with the plugs braced to prevent them from being drawn Q04/16/99 AS C-35 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING PART DA - ADDITIONAL SPECIAL CONDITIONS into the manhole. The plugs shall be installed in the lines beyond drop - connections, gas sealing connections, etc. The test head shall be placed inside the frame at the top of the manhole (so that the manhole frame seal is tested) and inflated in accordance with the manufacturer's recommendations. A vacuum of 10 inches of mercury shall be drawn, and the vacuum pump will be turned off. With the valve closed, the level of vacuum.shall be read after the required test time. If the drop in the level is less than 1 -inch of mercury (final vacuum greater than 9 -inches of mercury), the manhole will have passed the vacuum -test. After a successful test, the temporary plugs will be removed. The required test time is determined from Table I. Table I MINIMUM TIME REQUIRED FOR A VACUUM DROP OF 1" Hg (10"H9 - 9"Hg) (SEC) DEPTH OF M.H. 48-Inch'Dia. 6Q -Inch Dia. 72 -Inch Dia. (FT.) Manhole Manhole Manhole 8 20 sec. 26 sec. 33 sec. 10 25 sec. 33 sec: 41 sec. 12 30 sec. 39 sec. 49 sec. 14 35 sec. 45, sec. 57 sec. 16 40 sec. 52 sec. 67 sec. 18 .45 sec. 59 sec. 73 sec. ** T=5 sec. T=6.5 sec. T=8 sec. *"For all Manholes over 18 feet in depth, add 'T' seconds as shown for each respective diameter for each two feet of additional depth of manhole to the time shown for that 18 foot depth. [Example: A 30 (thirty) foot deep, 48 (forty- eight) inch Manhole Total Test Time would be 75.0 seconds. 45.0+6(5.0)=75.0 seconds] (Values listed above are extrapolated from ASTM C924-85). a. Manhole vacuum levels observed to drop greater than 1 -inch of mercury (Final vacuum less than 9 -inches of mercury) will have failed the test and will require additional rehabilitation. The Contractor shall make the necessary repairs to the already completed rehabilitation work at no additional compensation. If the failure of the vacuum test is determined to be due to preexisting conditions not on the manhole rehabilitation schedule for that manhole, this additional work may be authorized by the Owner's Representative. After completion of the additional rehabilitation the manhole shall then be re -tested ,as described above until a successful test is made. Only one payment for manhole vacuum testing will be made on each manhole. b. Vacuum testing is required on all manholes having interior rehabilitation. 04/16/99 ASC-36 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING II PART DA - ADDITIONAL SPECIAL CONDITIONS 0 2. Inflow Testing: U All partially rehabilitated manholes shall be dyed water tested unless the manhole has successfully passed the vacuum test. Manholes shall be dyed water tested in the presence of the Engineer. The dye test shall consist of applying a concentrated fl dye solution around the manhole. frame. Dyed water shall be applied for at least ten minutes. fl Manholes observed to be actively leaking greater than one drip per five seconds will have failed the test and will not be acceptable. Manholes failing the test will require additional rehabilitation by the Contractor at no additional compensation. 0 3. Other Testing: One (1) rehabilitated manhole will be randomly selected for further testing. A laboratory selected by the City will take core samples of wall sections of manholes with wall coatings. Testing of the gore samples will *be done to evaluate material thickness, compressive strength, flexural strength and slant shear bond strength. The following are the minimum required strengths for cementitious and non- cementitious wall coatings: 0 a. Compressive Strength. Compressive strength shall conform to ASTM C 495 and C 109 and shall meet or exceed a minimum 28 -day break of 4,000 A, psi. b. Flexural Strength. Flexural strength shall conform to ASTM C 348 and shall meet or exceed a minimum 28 -day break of 1,200 psi. 0 c. Slant Shear Bond Strength. Slant shear bond strength shall conform to ASTM 882 modified and shall meet or exceed a minimum 28 -day break of p 2,400 psi. If the manhole tested fails to pass any of these requirements, another manhole shall be selected and tested. If the second manhole fails, the City 9 may, at its option, stop work until the Contractor can provide assurance that testing requirements can be met. 9 4. Guarantee: Contractor shall warrant that the workmanship and materials are free from defects fl and that the manholes are sealed from inflow and infiltration for a period of three (3) II years from the date of final acceptance of the project. 9 D. MEASUREMENT AND PAYMENT Payment for manhole vacuum testing shall be made at the Contract Unit Price bid for each a Manhole Vacuum Test actually performed and passed and the appearance of the completed manhole is visually acceptable. Payment shall be full compensation for all labor I 04/16/99 ASC-37 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS and materials necessary to complete each test. No payment will be made for additional vacuum tests or any dyed water testing. Payment for manhole core testing, including all labor and materials necessary to complete each test, shall be made at the Contract Unit Price bid for each Manhole Core Test actually performed and passed. 0 DA -20 THIS ITEM INTENTIONALLY DELETED: DA -21 THIS ITEM 'INTENTIONALLY DELETED: 0 DA -22 REPLACEMENT OF CONCRETE CURB AND GUTTER: Contractor shall replace all damaged existing curb and gutter, as designated by the Construction Engineer, and replace with standard concrete curb and gutter, laydown curb and gutter, or in like kind, as governed by the standard City Specifications. Pay limits for laydown curb and gutter are De as shown in Drawing No. S -S5 of the Standard Specifications. Included, and figured subsidiary to this unit price, will be the required excavation into the street to aid in the construction of the curb and gutter. The pay limit will be 9" out from the gutter lip, with same day haul -off of the removed material to a suitable dump site. The street void shall be filled with H.M.A.C. "Type D" mix and compacted to standard City densities and top soil, if needed, shall be added and leveled to grade behind the curb. Existing improvements within the parkway such as water meters, sprinkler system, etc,; damaged during construction shall be replaced with same or better at no cost to the City. Backfill for curb andgutter shall be completed within fourteen (14) calendar days from the day of P Y demolition to date of completion. if the contractor fails to complete the work within fourteen (14) calendar days, a $100 dollar liquidated damage will be assessed per block per day. 0 The unit price bid per linear foot shall be full compensation for all materials, labor, equipment and incidentalsnecessary to complete the work. 0' DA -23 REPLACEMENT OF 6" CONCRETE DRIVEWAYS: D' This item shall include the removal and replacement of existing concrete driveways, due to deterioration or in situations where curb and gutter is replaced to adjust grades to eliminate ponding water with same day haul -off of the removed material to a suitable dump site. For specifications governing this item see Item No. 104 "Removing Old Concrete", Item No. 504" Concrete Sidewalk and Driveways". Pay limits for concrete driveway are as shown in Drawing No. S -S5 of the Standard Specifications. 0 The unit price bid per square yard shall be full compensation for all labor, material, equipment, supplies, and incidentals necessary to complete the work. DA -24 REPLACEMENT,OF H.M.A.C. PAVEMENT AND BASE: The contractor shall remove all existing deformed H.M.A.C. pavement and/or bad base material 0 that shows surface deterioration and/or complete failure. The Engineer will identify these areas 04/16/99 AS C-38 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART'DA - ADDITIONAL SPECIAL CONDITIONS upon which time the contractor will begin work. The failed area shall be saw cut, or other similar means, out of the existing pavement in square or rectangular fashion. The side faces shall be cut flvertically and all failed and loose material excavated. As a part of the excavation process, all unsatisfactory base material shall be removed, if required, to a depth sufficient to obtain stable sub -base. The total depth of excavation could range from a couple of inches to include the fl surface -base -some sub -base removal for which the Engineer will select the necessary depth. The remaining good material shall be leveled and uniformly made ready to accept the fill material. All excavated material shall be hauled off site, the same day as excavated, to a suitable dump site. 9 After satisfactory completion of removal as outlined above, the contractor shall place the permanent pavement patch, with "Type D" surface mix. This item will always be used even if no fl base improvements are required. The proposed H.M.A.C. repair shall match the existing pavement section or the ,depth of the failed material, whichever is greater. However, the patch thickness shall be a minimum of 2 inches. Generally the existing H.M.A.C. pavement thickness will not exceed 6". Before the patch layers are applied, any loose material, mud and/or water shall be removed. A liquid asphalt tack coat shall be applied to all exposed surfaces. Placement of the surface mix lifts shall not exceed 3 inches with vibrator compactions to follow each lift. Compactions of the mix shall be to standard densities of the City of Fort Worth, made in preparation to accept the. recycling process. All applicable provisions of Standard Specification Item Nos. 300 "Asphalts, Oils, and Emulsions", 9 304 "Prime Coat", and 312 "Hot -Mix Asphaltic Concrete" shall govern work. The unit price bid per cubic yard shall be full compensation for all materials, labor, equipment and 0 incidentals necessary to complete the work. DA -25 GRADED CRUSHED STONES: This item shall be used to repair the failed base material in areas exceed 8" deep as directed by the Engineer. The material shall be graded crushed stones. For specifications governing this item see Item No. 208 "Flexible Base". The unit price bid per cubic yard shall be full compensation for all materials, labor, equipment and 9 incidentals necessary to complete the work. DA -26 THIS ITEM INTENTIONALLY DELETED: DA -27 THIS ITEM INTENTIONALLY DELETED: QDA -28 THIS ITEM INTENTIONALLY DELETED: DA -29 REPLACEMENT OF 7" CONCRETE VALLEY GUTTER: 9 This item shall include the removal and reconstruction of existing concrete valley gutters at locations to be determined in field: 9 Removal of existing concrete valley, asphalt pavement, concrete base, curb and gutter, and necessary excavation to install the concrete valley gutters all shall be subsidiary to this pay item. 9 04/16/99 ASC-39 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS Furnishing and placing of 2:27 concrete base and crushed limestone to a depth as directed by the Engineer and necessary asphalt transitions as shown in the concrete valley gutter details, shall be subsidiary to this Pay Item. See standard specification Item No. 314, "Concrete Pavement", Item 312 "Hot -Mix Asphaltic Concrete", Item No. 104, "Removing Old Concrete", Item No. 106, "Unclassified Street Excavation" Item No. 208 "Flexible Base." Measurement for final quantities of valley gutter will be by the square yard of concrete pavement and the curb and gutter section will be included. Contractor may substitute 5" non -reinforced (2:27) Concrete Base in lieu of Crushed Stone at no 0 additional cost. See Item 314" Concrete Pavement". Asphalt base material may be required at times as directed by the Engineer to expedite the work at locations identified in the field. The concrete shall be designed to achieve a minimum compressive strength of 3000 pounds per 0 square inch. Contractor shall work on one-half of Valley Gutter at a time, and the other half shall be open to traffic. Work shall be completed on each half within seven (7) calendar days. If the contractor fails to complete the work on each half within seven (7) calendar days, a $100 dollars liquidated damage will be assessed per each half of valley gutter per day. The unit price bid per square yard for Concrete Valley as shown on the proposal will be full compensation for materials, labor, equipment, • tools and incidentals necessary to complete the work. DA -30 THIS ITEM INTENTIONALLY DELETED: DA -31 THIS ITEM INTENTIONALLY DELETED: aA DA -32 THIS ITEM INTENTIONALLY DELETED: 0 DA -33 REINFORCED CONCRETE PAVEMENT OR BASE (UTILITY CUT) The following specifications are for the furnishing and placing of reinforced concrete pavement or 0 base as shown on detail and as directed by the Engineer. A. GENERAL: 0 Reinforced concrete pavement or base shall conform to Specification Item No. X14 herein except for finishing and curing. B. FINISHING: Q The reinforced concrete shall be brought to a uniform surface by working with a wooden float. The surface shall be flush with the adjacent pavement and shall have a finish similar to the surrounding pavement. The surface shall be even and shall provide a smooth ride. 04„6/99 ASC-40 a PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING 0 PART DA - ADDITIONAL SPECIAL CONDITIONS C. CURING: 9 The reinforced concrete pavement surfaces shall be sprayed uniformly with a membrane curing compound conforming to the requirements of ASTM C-309, Type 2, white -pigmented compound, which shall not produce permanent discoloration of the concrete. Concrete shall be 9 allowed to cure for seven days or test cylinders reach 3000 psi before removal of barricades. D. EXECUTION: Included in this item will be the removal of the existing reinforced concrete pavement. The existing pavement shall be sawed so as to maintain an even, straight pavement cut. The existing reinforcing steel at sawed line and construction joints shall be lapped 18 inches with the new reinforced concrete pavement. The existing steel shall be thoroughly cleaned before lapping. The following work method will be performed on each utility cut: a 1. Place safety signs, barricades and/or other warning devices where necessary and as required. 2. Replace pavement to nearest joint. 3. Mark out the damaged area with keel, chalk line or paint being sure to include all areas requiring repair. 4. Saw cut along marked lines a minimum of two (2) inches deep. 0 0 0 a 0 0 0 0 5. Remove existing concrete. 6. Form joints and place reinforcing steel and Dowel Bars (as required) according to standard specifications. 7. Place and finish concrete. 8. Clean up job site, removing all debris. 9. Maintain traffic control devices to protect the area until the concrete has cured seven days or concrete reaches 3000 psi compressive strength. E. PAYMENT: Payment shall be made at the unit price per linear foot as shown on the proposal and shall be full compensation for furnishing all labor, materials, equipment tools and incidentals necessary to complete the work. DA -34 THIS ITEM INTENTIONALLY DELETED: DA -35 THIS ITEM INTENTIONALLY DELETED: 04/16/99 AS C-41 9 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a PART DA - ADDITIONAL SPECIAL CONDITIONS DA -36 THIS ITEM INTENTIONALLY DELETED: DA -37 THIS ITEM INTENTIONALLY DELETED: DA -38 THIS ITEM INTENTIONALLY DELETED: a 0 II! 0 0 Ii C 04/16/99 ASC-42 0 PRELIMINARY - FOR INTERIM REVIEW ONLY - NOT FOR CONSTRUCTION OR BIDDING a 0 Q� y� SECTIa4 E �v SPECI FI CAT IONS r ?� JA{VARY 1, 197d 0 0 , WATER DEPARTMENT I 0 0 0 All materials, construction methods and procedures used in this project shall conform to Sections El, E2, and E2A of the Fort worth Water Department General Contract Documents and General Specifications, together with any additional material specification(s), construction(s) or later revision(s). (See revisions listad on this sheet). Sections El, E2 and EZA of the Fort Worth Water Department General Contract Documents and General Specifications are nereby made a part of this contract document by reference for all purposes, the same as if copies verbatim herein, and such Sections are filed and kept office of the City ofForto Secretary City of Fort Worth as an official INDEX `� El MATERIAL SPECIFICATIONS aE'L COiISTRUCTI ON SPECI FI CA T IONS EZA GENERAL DESIGN DETAILS aRevisions as of April 20, 1981, follow: E1-2.4 Backfill: (Correct minimum compaction requirement to 95`: Procter density fl and correct P.I. values as follows:) roved for use in Additional backfill requirements when app C. streets : 1, Type B Backfill Ufl [.J (c) Maximum plastic index (PI) shall be 8 Z. Type (a) C Backfill 1 of 8 Material meeting a Pcor:aagt- asuitablenhaving or less shall be consideredtass for (b) ion by jetting of 9 Materialing with redtfor useonly or moreshallbe onside fl mechanical compaction EL-2.11Trench Backfill: (Correct minimum compactionrequirement wherever ita.l. Procter density except for p 9 p n appears in this section to 951, "95% modified Procter density" shall remain unchanged)- where the a 0 PMS 167 (Copper) PMS 288 (b,ie) �-- PMS 288 (Blue) 8'-0" t 3" 3'-1.5" 3", 1 4'-1.5" 3" 2.25' C) O cn FiO'kT o TH Scale -1" = 1' 09118196 rL - Iro a r., Water Fund's In Action PROJECT SIGN Figure 30 E2-1 Construction 1 �z COMPACTED BENTONITE CLAY 2:27 CONCRETE SEWER MAIN . - CLAY DAM JrROFME EXISTING GROUND :- III II II II •. i �� �Ii�lll 1`m= U RN 2 �� NCH ,� a O • PIP 0/A COMPACTED BENTONITE CLAY OR 2:27 CONCRETE UNDISTURBED SOIL, MINIMUM TRENCH WIDTH = PIPE DIA t t CLAY DAM SECTION 0 CLAYI DAM CONSTRUCTION U NOT TO SCALE 0 IO U' 1 �'o!! j..rC d�)d eel dr�P. uI /•'! � \ �f"o..4�.fs✓��ar�f.corrcea/ed.,oick• ''�`; '° l� / \ 1 s/o (s or pick.&2I , /ref : E 2-/4' + 11'7) Minimum 2 r ores .':: ra, I:. . ��^ ::.: •':� Vy.,;;:, fit;/�. pcefvrmdbiteunastic joint sa/n( (Rain-Mek orapprored fQua/). 'y; . fl ' Ii I I no r c• ci:,^d(a . Iii c,r(s r+ d rro ,flr�nol.tlrC Cr?s ai- ;rI., ��:;Q •tr '' fr�Cc .!. S. i // C- cr78 �:ncc'osr` ;o-:�: • /-CrcO' �Cn/:OIC i. .i�; I ir'n.�9 O� a u,�1 .�� I� r- rr �- - 2 - i !IEl . 11�UIj;� __ H __ __ n J'ti .avtt'A d; r1. ' • � r'i G;�, a s•:. .': . � •:c { _:�. . O .�' ' 0 Q UV 1.'' •'fit •:.• . �'} ! ' •�' �. L:---•_....'�� ' +-' .r I` ,.3ucu:"�,�.• ��'!1=� I'vr"s•Tu',i+`�E� ; 3'? % 0,:;•O ,►__v-+--r--.� QClgrs F (0O 2 c.iC cia( /1; U. 8r''rr SM'rn) H-itt I•tatcrial • E2 -III CoIlsrruction D — 32 -- - COLLAR WHERE* :O, SEE PLAN SHEET i�oo FRAME AND COVER COMPLETE WITH WATERTIGHT MANHOLE INSERT :...:: 2 ROWS BITUMASTIC JOINT SEALANT BETWEEN :ALL ADJUSTMENT JOINTS SECTIONAL ELEVATION `- PRECAST ADJUSTING RINGS (CAST IN PLACE ALSO ALLOWED) PRECAST CONCRETE CONCENTRIC CORBEL •SECTION (CAST IN PLACE ALSO ALLOWED) -OUTSIDE TO BE WATERPROOFED WITH TWO COATS OF ASPHALT EMULSION- (SANITARY MANHOLES ONLY). FLEXIBLE PIPE GASKET CAST INTO STRUCTURE AT ALL PIPE PENETRATIONS CRUSHED LIMESTONE PIPE BEDDING (4' MINIMUM BELOW BELL) INTEGRAL MANHOLE BASE OR PRECAST CONC. SLAB (6' MIN. THICKNESS) PER ASTM . C-478 E J ® = = = GJ ® C l = © = C=J = • = 1= © Qi 0 Where M.H.'s are In street Install two or more courses of brick.Or concrete grade rings between casting and top of brick cone, or concrete slab. Use Cast Iron Pipe to First Joint Behind Limit of Excavation I UI 411 p�" j•� I IJ Conc. Collar l 0 Limit of Excavation 0 Where M.H.'s are built in streets to be paved, M.H. rim to be set to proposed paving grade llt�=llll_' 2 - 0" o Q M //211I1 311 .J. CasTHh ron Tee 111 _ o Jii1k co ll l( 0 ill l lilt! Thrust Block to Extend 6" In All Directions from Outside Diameter fl of Pipe — 41-0" ,I f Required $rov i de Stub Extension At &nn1lof P.E. in M.H. Use standard McKinley, No. A24 AM. or Equal M.H. Frame and Cover Thli�ul7u1 Set in Mortar Install M.N. Ste • Same as in Stand M.H. ya gl. Grouted Invert Use 400rw Concrete Push -on Plug Install Nuts Away from M.H. Wall on M.J. Fitting COR-TEN Bolts Concrete - See Standard 4' Dia. M. H. Detail Figure 103 Vertical to 3/4 Point of Pipe U41 dia. for sewe pipe up to 2111 dia. 5' dia. ft sewer pipe 21" TYPICAL SECTION 39" dia. STANDARD FOUR FOOT DROP ACCESS MANHOLE FIGURE 147 E 1-14 Material R EV I SD E 2-14 Construction =3 o =3 ® =3 C C3 = C ® =3 =3 =3 a = Q =3 =3 H Y D K'A U L1 C. S L l D :'1 �•: MANHOLE WALL • TMAX 4. SECTION 0 0 0 0 a a 0 D 0 STREET DIRT • 4.0' 4-#4 REBARS TYP. ' 3" TYP. USE 2500# CLASS / '- 8 CONCRETE. / £ . ' A A . , % CONC. COLLAR 3/4" CHAMFER TYP. HEIGHT VARIES `. .j PVMT. PYMT. i ,-GROUND - 2:27, .•- ,: � 1 �7� . 1 GRAD RING _ _ • . . . 6" MIN. CASE 1 CASE 2 . _ RAM NECK 3" MINIMUM CASE 1 HEIGHT VARIES COLLAR SHALL EXTEND TO TOP OF 2: 27 CONCRETE SECTION A ( NO REBAR RED. ) CASE 2 COLLAR SHALL EXTEND 3" BELOW BOTTOM OF LOWEST GRADE RING (REBAR REQ.) FIGURE 121 CONCRETE MANHOLE COLLAR DETAIL El -20,21 MATERIAL E2-20,21 CONSTRUCTION• ' D - 33 5/18/90 0 EXCAVATION, BACKFILL AND PAVEMENT REPAIR UNDER EXISTING STREETS MIN. 2HOT OR COLD MIX ASPHALT TEMPORARY PAVING REPAIR SHOWN - EXIST. STREET PAVEMENT FOR PERMANENT PAVING REPAIR DETAILS SEE FIGURES 1-5 OR AS SPECIFIED IN THE PLANS OR SPECIFICATIONS. /� MIN. 6' COMPACTED ������ a • • • FLEX -BASE MATERIAL // /�%/��%/� • .. BOTTOM OF TEMPORARY OR ° • PERMANENT PAVEMENT REPAIR EXIST. BASE x SAND MATERIAL EMBEDMENT SEE SPEC. E1-2 wx 1) SEWER - MINIMUM 12' - SAND EMBEDMENT COVER 2) WATER - MINIMUM 6' SAND EMBEDMENT COVER MINIMUM 6' EMBEDMENT' ** 3KTYPE C BACKFILL SEE SPEC. EI-2 1'-6' MAXIMUM CRUSHED STONE SEE SPEC. E1-3 INCLUDED IN LINEAR FOOT BID PRICE OF PIPE FIGURE B (SEWER: ALL SIZES) (WATER SIZES 16" & LARGER) NTS REV: MARCH 25, 1999 Existing surface kfill as specified • J} ,,•• ��y/gyp •�Ci•�'-,.- - iO 6" min. dimension. 6" max. for pay purposes when bid per cubic yard. O2 6" min. dimension. Max. for pay purposes shall be 6" on main 24" and smaller, 9" on mains 30" and larger, when bid per cubic yard. Q3 4" min. dimension. 4" max. for pay purposes when bid per cubic yard. Class "E" 1500m concrete. Concrete encasement shall stop 1' either side of joint, and when encasing concrete pressure pipe, full lengths of pipe shall be encased, joints excluded. CONCRETE ENCASEMENT DETAIL 1-1.-78 FIGURE 20 E 1-7 Material E 2-7 Construction CD C J 47 JCD v,CD 1-1-78 r 3/L4. Road a Cu KI ' Standard • •i t T�UA�vH�.m►�r.,�+r��n•••�•�--• - T _-- Curb lit _W — 2 Servi c ne,Mi n. I / I -' � j 3 Watertight Plub Graded I j " I f C. I . Min. Grade 1% TYPICAL SECTION Note: Embedment and backfill as required for adjacent sewer main shall be included in the price bid per sewer service complete in place. Standard Cu; Gutter Secti Service Lime Sewer service line location to be marked with red vinyl tape et least 3" wide end 10 mil thick attacked to NOTE: the end of the service and Tees Will Be Used On All Service extending through the back - Lines Constructed At Same Time As fill at the point of house Public Sewer. service connection behind the proposed curb. SERVICE LINE DETAILS FIGURE 115 El -9 Material E2-9 Construction U, CLEANOUT WITH BOX - I AND LID SW CLEANING WYE W FINISHED GRADE FINISHED GRADE SEWER PIPE PLUG w, a: ii-:"- - DIP FOR STACK -- --- _-- EXISTING SERVICE LINE - JSPECIFIED ADAPTER COUPLING I 5 MIN AT BOTTOM ONLY _______ \ 45' BIND a�` TYPE C" OR B' EACKF/LL i•-i NEW SANITARY SEWER LINE iWIr-H STANDARD EMBED uENT X\ PE,R FIG 109 CROSS-SECTION OF SEWER AT SERVICE CONNECTION 9 r I i DIP TEE FITTING ' 1 r i a_ : _ -- _------ U :.'.ir' r a r: O 0 PLAN VIEW CHIMNEY SERVICE (NOT SCALE) U wl co LT NO.3 BARS ON 24" CENTERS BOTH WAYS a a O a U w WITH MIN.2 BARS LONGITUDINAL IN DITCH EXISTING CURB EXIST CONC. CLASS A REINFORCED CONCRETE a GUTTE PAVEMENT PAVEMENT REPLACEMENT EXISTING CONC. EXISTING SAWCUT SAW CUT PAVEMENT CURB aGUTTER � � u f o0 O'O �.� Z 10: ov •d. JO A.�Op dO�o • o • P, j :moo zi o4.�osd �0�O e���o " �� 12 2:2T CONCRETE '`� EXIST BASE DITCH WALL --ALL TRENCH BACKFILL SHALL EXISTING BASE (IF ANY) MEET REQUIREMENTS FOR (IF ANY) GRADATION &COMPACTION AS SPECIFIED IN ITEM 402 OF THE STANDARD SPECIFICATIONS FOR CONSTRUCTION PUBLIC WORKS DEPT., CITY OF FORT WORTH,TX. OR BACKFILL AS SPECIFIED IN PROPOSED FACILITY SECTIONS EI-2 a E2-2 OF THE INSTALLATION SPECIFICATIONS FOR WATER DEPT. PROJECTS FORT WORTH WATER DEPT., CI1Y OF FORT PIPE WORTH,TEXAS. Nom: NO.1-REINFORCED CONCRETE PAVEMENT NO.2- IF STEEL EXISTS IN CONCRETE NO.3-REINFORCED CONCRETE PAVE- SH4LL BE REPLACED TO ORIGINAL PAVEMENT TO BE CUT,THE STEEL SHALL MENT WILL BE REPLACED OVER DEPTH OR TO A MINIMUM DEPTH OF S BE CUT & SALVAGED AS POSSIBLE. A MIN- TRENCH,AS SHOWN, IN THE EVENT WHICHEVER IS GREATER. IMUM LAP SPLICE DISTANCE OF 12" NON -REINFORCED CONCRETE NO.4-BEDDING OF PIPE TO MATCH SHALL BE PROVIDED. PAVEMENT IS REMOVED - ADJACENT SECTIONS OR SPECIFI- CATION 402,WHICHEVER IS GREATER. TYPICAL S ECTION-TRENCH REPAIR CONCRETE DELE ED IF HALFTHE SPEC BE CONCRETE PAVEMENT REV. -6-t-76 THICKNESS 92'27 IS ADDED TO REV. -II -1-79 THE CLASS 'A"CONCRETE. • CITY OF FORT WORTH,TEXAS REV. -12-15-80 FILE NO.C-3226 TRANSPORTATION/PUBLIC WORKS REV. -8-30••82 OT-KRNFORM COMCRtTE EASE SINCE Et RE►LACED TO ORNSIIAL DIEM OR TD A MNMNM(>M DEPTH OF S -W1NCM[i[R is TUC {*EATER. N5- SEDONO OF PIPE TO MArCHH ADJACENT SECrIO, s OR SPECIFICAT)ON( 402 WHI IS LORE STRINGENT, Fla Na C-3227 I N0.2 -V STEEL EXISTS IM COMC*ET[ lq.5-REi/fORCfD CONCRETE BASE IASE TO It CAT, THE STEEL WILL K REPLACED AS SMDWM• 4 - ALL EXIST. AS►w1LT C&URK SHALL S»Li K CVT ANp SALM/t;{ AE OVER TI�NG( a T1! £YtNT $Oa- O[PTNIt P MtCIED T PAYE o THE ORM 0 ALL POSSI{LE. A Rt1NNITiji LAP SPLICE *011FORCtp CONCRtTE BAS[ IS ASPHALT STREETS SHALL K I DISTANCE Of I"I'LL K poloy Q REMOVER_ Of FINE GRADED SURFACE COU* C1NCY[R TYPICAL SECTION TRENCH REPAIR ASPHALT SURFACE a REINFORCED CONCRETE BASE c/rr of FORT iroRrN TRANSPORTATION/PUBLIC WORKS DEPT. £M4INE£f/N$ DIVISION RE1�- 1-t-75 T fiV -11 -I-7! REV. -12 -I6 -SO L REV -S -30-S2 rip. a. D ILL NOTE O ![LOW ... .... _ u u• n ■ICI ALtuIYT_� Ix1ST H M A C Ixtii CURI ! 6UTTIX NOTES: D 2.2? CONCRETE !HAUL K $4 TALLIED A writ Of 5 $41DE BOTTOM Of EXIST. H.M.A.C. FAVEWNT, a ALL EXIST. A1?HALT SNALL K REP LA CED TO THE SHLL a2j0f FIN Ex a GRAD N T BEDDING Of PIPE TO MATCH ADJACENT SECTION OR SPECIFICATION 402, WHICHEVER IS MORE STRNSCNT. ' ON MA.IOAPRO"TS,T)* PRO* CT [NMN(E OR DESIGNER MOST EVALUTX TM PULL' WIDTH Of LXIIT N4 )LM.A C. PAVD1NT AI TO nIMKIS.COIORX)NI & ABILITY TO WITHSTAND CONSTRUCTION LOADING. IF APPROPRIATE,TIK FULL WIDTH Of SURMC( $HALL It REMOVED & RIPLAC[O WITH APP11OPRIATE TRIATM/IT TO EXISTING SASE OR SUNAA!( !MATERIAL, �;5.FACE REOIfiCMINTI FOR 6AADATWi AND COMPACTION Al IP1CIFRIG IR ITEM 401 Of THE ITAIeOAAO SPICIFICA- TIOMI FOR CONITRUCTION. PUBLIC WORKS DEPT . CITY Of FORT WOATM TEXAS 00 SAC&?ILL Al 2f'[CYKD IN 39CTgMI (I- 2 ANO [1. 1 Of TIE aPECIFICATIONI FOR WATER D!►ART- MINT PROJECTS FONT WORTH WATER IIPT,CITY Of PORT WOATN, TEXAS. TYPICAL. $ECTIQN-TRENCH REPAIR TYPICAL H. M. A. C."SURFACE WITH SOIL BASE S1 NOT MN ASPHALTIC OR OSMITI CITY of foRr IIURTN AEV-S-1O-e2 TRANSPURTATII)N/PUBLIC WuRKS DEPT. n ARV -11 -I --Ts o No. C• 32 2 f !NV/N!(RAMW DIVISION Rtv-12.16 -40 EXIST CURS ! SUTTIR f/t. U EXPERIENCE RECORD List of Projects your Organization has successfully completed: ANT. OF CONTRACT AWARD }_TYPE OF WORK DATE ACCEPTED NAME AND ADDRESS OF OWNER I ____ _____ ______I ___ ________I______H ___________________________ 1 _______________________ 1- _____________________________________ List of Projects your Organization is now engaged in completing: ANTICIPATED DATE1 NAME AND ADDRESS A.MT. OF CONTRACT AWARD I TYPE OF WORK JOF COMPLETION OF OWNER 0 0 0 0 0 0 0 0 0 List Surety Eonds in Force on above incomplete work: I Revised 2-1-79 C C 0 Ii 0 III 0 0 0 0 0 0 I 0 0 0 0 0 EQUIPMENT SCHEDULE List of Equipment owned by Bidder that is in serviceable condition and available for use. Portions of work bidder proposes to sublet in case of Award of Contracts including amount and type: 0 0--- Notice of Proposed Installation Utility Line on Non -Controlled Access Highway 0 rorm 1023 (Rev. 9-93) (Previous version(s) are obsolete.) To the Texas Transportation Commission Date _93 /02 / 99 fl c/o District Engineer LI Texas Department of Transportation Fort Worth,Tarrant Countv,Texas Formal notice is hereby given that The City of Fort Worth Company proposes to place a Sanitary Sewer ( °T -6 3 L ) Dline within the right-of-way of _ U.S.Highway 2 8 7 in T a rr an t County, Texas as follows: (give location, length, general design, etc.) Proposed 8" diameter Sanitary Sewer Lateral 6342 (L-6342) will be located n along the southwesterly edge of the U.S.Highway No.287 right-of-way from Canberra Court to 240' southeast of Berry Hill Drive. The proposed sewer is located west of the westerly parallel with the southwesterly top of the backslope and approximately right-of-way line. The includes abandonment of existing construction L-6342 which crosses Hwy 287 at 150' northwest of Canberra Court. OThe line will be constructed and maintained on the highway right-of-way as shown on the attached drawing and in accordance with the rules, regulations and policies of the Texas Department of Transportation (TxDOT), and all J]governinglaws, including but not limited to the "Federal Clean Water Act," the "Federal Endangered Species Act," and "Federal Historic Preservation Act." Upon request by TxDOT, proof of compliance with all governing laws, rules, and i egulations will be submitted to TxDOT before commencement of construction. Our firm will. use .Best Management Practices to minimize erosion and sedimentation resulting from the proposed installation, and we will revegetate the project area as indicated under "Revegetation Special Provisions." Our firm will insure that traffic control measures complying with applicable portions of the Texas Manual of Uniform Traffic Control Devices will be installed and maintained for the duration of this installation. OThe location and description of the proposed line and appurtenances is more fully shown by sets of drawings attached to this notice. Construction of this line will begin on or after the 1st day of July LiBy signing below, I certify that I am authorized to represent the Firm listed below, conditions/provisions included in this permit. OProject Manager: Group 6, Contract QD.O.E. No.1828 I 0 S 1) one 19 99 complete and that the Firm agrees to the Mike Domenech,P.E. Firm City of Fort Worth 1, Part 8, M-390, A._Douglas las Rademaker, (Print) g P.E. Title Director, Department of Engineering Address 1000 Throckmorton Street Fort Worth, TX 76102 0 Phone No. (817) 8 71-615 7 Form 1082 (Rev. 09-93) (Previous Versions Obsolete) U To: City of Fort Worth Department of Engineering 1000 Throckmorton Street Fort Worth, Texas 76102 c/o Mr. A. Douglas Rademaker, P.E. Permit # 220 -SS -102-99 Hwy. No. US 287 Maintenance Section No. 04 County: Tarrant Date: March 18, 1999 Reviewed & Issued By: G. Rodriguez The Texas Department of Transportation (TxDOT) offers no objection to the location on the right-of-way of your proposed 8" sanitary sewer line as shown by accompanying drawings and notice dated March 2, 1999, except as noted below. aAdditional Requirements: None Your attention is directed to governing laws, especially to Article 6674w-1, Vernon's Annotated Civil Statutes of Texas, pertaining to Control of Access. Access for serving this installation shall be limited to access via (a) frontage roads where provided, (b) nearby or adjacent public roads or streets, 8 trails along or near the highway right-of-way lines, connecting only to an intersecting road; from any one or all of which entry may be made to the outer portion of the highway right-of-way for normal service and maintenance floperations. The Owner's rights of access to the through -traffic roadways and ramps shall be subject to the same rules and regulations as apply to the general public except, however, if an emergency situation occurs and usual means of access for normal service operations and will not permit the immediate action required by the Utility Owner in making emergency repairs as required for the safety and welfare of the public, the Utility Owners shall have a temporary right of access to and from the through -traffic roadways fland ramps as necessary to accomplish the required emergency repairs, provided TxDOT is immediately notified by the Utility Owner when such repairs are initiated and adequate provision is made by the Utility Owner for convenience and safety of highway traffic. It is expressly understood that the TxDOT does not purport, hereby, to grant any right, claim, title, or easement in or upon this highway: and it is further understood that the TxDOT may require the owner to relocate this line, subject to provisions of governing laws, by giving thirty (30) days written notice. u are requested to notify this office prior to commencement of any routine or periodic maintenance which requires pruning of trees chin the highway right-of-way, so that we may provide specifications for the extent and methods to govern in trimming, topping, tree balance, type of cuts, painting cuts and clean up. These specifications are intended to preserve our considerable investment in highway planting and beautification, by reducing damage due to trimming. The installation shall not damage any part of the highway and adequate provisions must be made to cause minimum inconveniences to Dtraffic and adjacent property owners. In the event the Owner fails to comply with any or all of the requirements as set forth herein, the State may take such action as it deems appropriate to compel compliance. GENERAL SPECIAL PROVISIONS: Special Requirements for installation of Utilities on Highway Right -of -Way Backfill of Utility Trenches, Rev. Feb., 1971 Utility Construction Work on Saturdays and Sundays for Utility Installations Authorized by Utility Permit. Utility Policy Chart. Details for Installing Underground Utilities in Vicinity of Trees. REVEGETATION SPECIAL PROVISIONS: In order to minimize erosion and sedimentation resulting from the proposed installation, the project will be revegetated as indicated on the attachment. flThe Utility Contractor shall contact the proper City Authorities prior to construction. Please notify Glynis Rodriguez at (817) 370-6585, forty-eight (48) hours prior to starting construction of the line in order that we 0may have a representative present. 0 J Texas Depart ent of Transportation -Fort Worth Steven E. S' ons, P. . Di ict Engin For: erry Distri Right of Way Utility Supervisor TEXAS DEPARTMENT OF TRANSPORTATION DISTRICT NO. 2 SPECIAL REQUIREMENTS FOR INSTALLATION OF UTILITIES ON HIGHWAY RIGHT-OF-WAY (1) Coordination of Work with Highway Contractor or State Forces If any portion of related highway is under construction, no Utility Owner's Forces or Contractors shall enter within the highway right-of-way without first consulting the Highway Contractor and making necessary arrangements to coordinate installation of its facilities with Highway Construction. All work relative to installation of Utility Owner's facilities shall be conducted in such manner as not to interfere in any way with operations of the Highway Contractor. The above requirements with respect to coordination of work with Highway Contractors shall likewise apply to work being done by State Forces. (2) Changes in Location of Proposed Utilities No changes shall bemade in approved location of utilities within limits of highway right-of-way without prior authorization of Texas Department of Transportation. (3) Adjustment of Utility Poles and Appurtenances No deviations shall be made from the location of underground lines approved or designated by the Texas Department of Transportation either during planning. or construction to avoid utility poles. Where such poles are adjacent to any proposed underground line, Utility Owner shall make necessary arrangements with other Utility Owners.for moving poles and appurtenances and/or supporting same during trenching operations. Any poles, anchors, etc. relocated to clear the proposed underground line shall be moved toward the highway right-of-way line and location shall be subject to the Texas Department of Transportation approval. (4) Submission of Project Drawings to State Prints of detailed drawings showing exact plan location and profile of underground line shall be submitted to Texas Department of Transportation well in advance of construction of line, for verification that location of line is in accordance with requirements specified herein. (5) Staking of Utility Lines in Advance of Construction Utility lines shall be staked well in advance of construction of line so that Texas Department of Transportation can inspect staking to verify that alignment conforms to requirements set out herein and that there is no conflict with highway facilities. Utility Owner shall give Texas Department of Transportation not less than 48 hours notice ahead of time when staking of line will be completed. ROW Utility Section January 28, 1992 -2- (6) Notification of Abandonment of Location Authorized by Permit and Assignment of Authorized Location to Other Utility Owners It is expected that where the installation of utility line has been authorized, such installation will be made within a reasonable period after approval of permit, otherwise, the Texas Department of Transportation reserves the right to assign the location originally approved for the line to another utility. If construction of Utility line has not been started within 4 months after date of approval, the Utility Owners shall immediately notify the Texas Department of Transportation whether it is still intended to install the line and the date construction will commence. If the owner intends to abandon all or any part of the authorized location, the Texas Department of. Transportation shall be informed accordingly so that such abandoned location may be assigned to other utilities if deemed necessary by the Texas Department of Transportation. (7) Inspection by Texas Department of Transportation Representatives Utility Owners shall inform their forces or contractors that all utility installations authorized by Utility Agreement or Permit shall be subject to such inspection and tests as may be deemed necessary by the Texas Department of Transportation to verify that work is being done in accordance with the Texas Department of Transportation requirements. All supervisory personnel shall be instructed to furnish such information and cooperation as may be required to perform such inspection. (8) Copy of Permit on Job Site A copy of the approved permit shall be kept on the site of the work at all times when work is in progress. (9) Full -Time Supervision and Inspection The Utility Owner shall provide competent full-time on -the -site supervisors or inspectors for all utility installations either authorized by permit or covered by utility agreement with the Texas Department of Transportation. (10) Incorrect Location of Utilities Any pipe incorrectly located during construction to conflict with any highway structure shall be removed and laid in proper location at entire expense of Utility Owner. (11) Protection of Highway Facilities During Installation of Line All construction operations relative to installation of the pipeline shall be conducted in such manner as to protect highway facilities from damage at all times. (12) Disposal of Excess Excavation and Clean Up Excess material from trench excavation shall be removed from highway right-of-way and job site cleaned up and left in satisfactory condition. ROW Utility Section January 28, 1992 r F -3- (13) Repair and Replacement of Riprap and Earth Slopes Any existing riprap cut by trenching operations shall be replaced and surface of new riprap finished to match that of existing riprap. Concrete riprap shall contain not less than 3 sacks of cement per cubic yard of concrete. Reinforcing steel shall conform to that of existing riprap. Slopes of highway cuts and embankments damaged by any operations relating to installation of utility shall be repaired and restored to the exact contour existing prior to initiation of the utility project. All earth placed in the restoration of slopes, etc., shall be compacted to a density equal to or greater than that of the original slope as directed by the Texas Department of Transportation representative. (14) Replacement of Base and Pavements Where removal of.base and pavement has been authorized, all such base and pavement shall be replaced as directed by the Texas Department of Transportation representative. All existing pavement and related flexible or concrete base, which is to remain in service either permanently or temporarily, or to be incorporated as a part of the highway project, shall be replaced. (15) Repair and Restoration of Sodding Where sodding is disturbed by excavation or backfilling operations, such areas shall be replaced by mulch sodding on all slopes of 2% or less. All slopes over 2% shall be replaced by block sodding. (16) Installation of Lines Beneath Pavements No open cuts for pipe trenches shall be made across any pavement traffic lanes or turning lanes, acceleration lanes, deceleration similar facilities unless specifically authorized by the Texas DI Transportation. Pipe shall be installed by boring and tunneling tunneling and boring shall be cased and pressure grouted to seal and adjacent earth. beneath main highway lanes and other apartment of and all such voids between casing Open cuts will be permitted across pavements of existing street connections, where pipe trench is adjacent to and parallel with highway right-of-way line and where pavement has not been recently constructed. No open cuts will be permitted across such connections where new pavement has just been constructed without written permission of the Texas Department of Transportation. (17) Casing of Lines Utility lines carrying liquids or gases under pressure may be installed uncased in accordance with the Texas Department of Transportation Utility Accommodation Policy. Water lines crossing beneath culverts shall be cased and casing shall project 5' beyond outside limits of culvert. Voids around casing, placed by tunneling or boring, shall be pressure grouted. ROW Utility Section January 28, 1992 -4- (18) Use of Explosives No explosives shall be used within limits of highway right-of-way without written permission of the Texas Department of Transportation. Requests for permission to use explosives shall include the following information: (a) Location of highway where use of explosives is proposed. (b) Type and amount of explosives to be used. U If the use of any explosives is permitted, all blasting operations must be conducted ,. in such manner as to completely protect adjacent property and the traveling public and not interfere with highway traffic. No blasting will be permitted in the vicinity of any structures or beneath any pavements which are to remain in use. (19) Protection of Highway Traffic, Barricades, Warning Signs, Etc. No construction operations relative to installation of utilities will be permitted within the limits of existing pavements carrying traffic, or shoulders adjacent thereto, unless specifically authorized by the Texas Department of Transportation. Excavated materials shall be kept off pavements at all times. Barricades, warning signs, flares, flashing devices, and Flagmen shall be provided by the Utility Owner or his Contractor when necessary. (20) Protection of Existing Utilities (a) Prior to selecting a location for a proposed installation or accepting a location suggested by the State for such installation, the Utility Company shall take all necessary steps to determine that the location is not already occupied by another Utility and to determine that no damage will be done to existing Utilities. (b) Prior to beginning actual construction operations the Utility Company shall notify all other Utility Companies who may have facilities in the area so they can determine if the proposed construction will conflict with or otherwise damage their facilities. (21) Use of Plastic Pipe and Nonmetallic Pipe (a) Plastic pipe may be used for gas lines provided the internal pressure does not exceed sixty pounds per square.inch, they are encased from right-of-way line to right-of-way line on crossings and have at least thirty inches of cover. The maximum size of plastic pipe gas lines shall not exceed six inches. (b) Where nonmetallic pipe is installed longitudinally, a metal wire shall be concurrently installed or other means shall be provided for detection purposes. . ROW Utility Section January 28, 1992 -5- (c) Plastic pipe may be used for water lines provided the minimum depth is 30 inches. Encasement shall be as provided in Rule 21.45 of the Utility Accommodation Policy. (22) Above Ground Appurtenances to Underground Utilities Above ground installation, such as pedestals, fire hydrants, meters, etc., installed • as a part of an underground utility shall be located at or near the right-of-way line, well outside the highway maintenance operation area. (23) Markers The utility company shall place a readily identifiable and suitable marker at each right-of-way line for highway crossings except where marked by a vent. ROW Utility Section January 28, 1992 BACKFILL OF UTILITY TRENCHES (A) Description This specification shall govern backfill of trenches which have been opened for the removal, adjustment, or installation of utility lines within the limits of highway right-of-way or highway construction projects. _ Type 1 Backfill shall be used in all cases except the following: Type 2 Backfill, when allowed by the permit, agreement, or by the Texas Department of Transportation representative, may be used only in trenches parallel and adjacent to right-of-way lines and in areas where there will be no earth work construction or construction traffic except that this method may be used for placing backfill which will later be removed by highway construction. Types 3 or 4 Backfill may be required for special conditions.where the possibility of settlement or erosion of backfill must be eliminated or when, after backfill is started, it becomes apparent that Type 1 Backfill is unsuitable. t Type 5 Backfill may be used in special locations where allowed by the permit, agreement, or by the Texas Department of Transportation representative. (B) Type 1 Backfill (Compacted Backfill) Type 1 backfill shall consist of compacted material obtained from suitable soil excavated from the trench, or from sources outside the highway right-of-way. Material shall be free of rock, lumps, or clods that will not break down under compaction. Backfill material shall be placed in the trench in layers not to exceed 6" in depth and compacted. Water shall be added as required to facilitate compaction. Compaction shall be done with rollers or mechanical tamps. . Use of rollers will be permitted only when such use is not believed detrimental to any highway facility and the type roller used is acceptable to the Texas Department of Transportation representative. When rollers are employed, mechanical tamps shall be used along sides of trench to compact any backfill that cannot be reached with rollers. Compacting shall be continued until a backfill density equal to that of the adjacent, undisturbed material has been obtained. Where trenches lie within the limits of drainage ditches and channels which are in rock, the Type 1 Backfill used in trench shall be sealed with 1' of concrete backfill struck off flush with the top of rock. (C) Type 2 Backfill (Water Jetted Backfill) Type 2 Backfill shall consist of suitable material excavated from the trench or other acceptable material obtained from sources outside the highway right-of-way. ROW Utility Section January 28, 1992 r 1 BACKFILL OF UTILITY TRENCHES C0NT'D. Backfill shall be placed in the trench in layers not to exceed 2' in depth by blading, dozing, or other approved means and then jetted with water delivered unde pressure through a metal jet. After the trench is filled and jetted, additional material shall be mounded thereon and rolled with construction equipment. (D) Type 3 Backfill (Stabilized Sandy Soil or Washed Sand) Stabilized backfill shall consist of either sandy soil free of lumps and clods or washed concrete sand, stabilized with two sacks of Portland Cement per cubic yard. If aggregates are not sufficiently moist to produce a mixture -suitable -for compaction, water shall be added as required. Either transit -mix -or stationary type mixers may be used. I After mixing, the stabilized material shall immediately be placed in the trench in uniform layers not to exceed 6" in depth and compacted as specified for Type 1 Backfill. Compaction shall be completed within two hours after mixing. I -* (E) Type 4 Backfill (Lean Concrete) Concrete backfill shall contain wo sacks of Portland Cement per cubic yard of concrete as may be specified by the agreement or permit or by the Texas Department of Transportation representative. Concrete aggregates shall be washed. Concrete may be mixed on the project in an approved mixer or in an approved central -- mixing plant. Slump shall be between 3" and 6" as directed by the Highway Department representative. Concrete shall be deposited in lifts not to exceed 18" in depth. Sufficient I vibration shall be done to eliminate voids but care shall be exercised that contamination by adjacent soil does not occur during vibration. All concrete shall be placed within one hour after mixing. (F) Type 5 Backfill (Uncompacted) Type 5 Backfill shall consist of materials which have been removed from the trench. The material shall be pulverized and wetted if necessary, then replaced in the trench by blading, dozing, or other suitable methods. Excess material shall be mounded on the trench and compacted by rolling with construction equipment. Ridges created by such mounding shall be left sufficiently flat so as not to interfere with mowing or other maintenance operations. I I I ROW Utility Section 1 January 28, 1992 I 0 0 Ei UTILITY CONSTRUCTION WORK ON SATURDAYS AND SUNDAYS FOR UTILITY INSTALLATIONS AUTHORIZED BY UTILITY PERMIT Except in case of an emergency as mentioned later herein, no work Li which requires inspection by the Texas Department of Transportation will be permitted on Saturdays or Sundays. In the event the Utility Owner believes that Saturday or Sunday' work is necessary due to an emergency, such as the necessity to avoid complication in operation of owner's utility plant, or to avoid delay of the Highway Contractor, such work will be permitted providing that the Utility Owner agrees to: fl a. Obtain Texas Department of Transportation approval at' least 48 hours -in advance so that arrangements can be made to have a Highway Inspector present. Failure to a give such advance notice will be sufficient reason to not grant approval for working. b. Require his Contractor to have sufficient personnel and equipment on the job to efficiently prosecute the work. •.c. Have owner's supervisor or inspector present on the job at all times while the above types of work are in _ progress. 0 0 a Q D02-176 a CONTROLLED ACCESS HIGHWAYS �I I 7 0 LI 0 AG H 0 0zz STANDARD REQUIREMENTS Location - Near ROW line: Crossings approx. perpendicular. Vent - At least one required. Markers - Required. Depth -'18" ubual and, 12" minimum or ½ diam. of •casing under subgrade. •-30" total clear depth at all points where encased. 36" total clear depth where not encased. (Longitudinal) Encasement - Under roadways, ditches, struc- tures and center medians. Exceptions allowed for wide medians. Location - Near RCW line. Crossings approx. perpendicular. Markers - Required. Depth -.Minimum 18" under subgrade or 60" under pavement surface. 48" minimum under ditches. Exceptions may be allowed if pro- tected by reinforced concrete slab. Encasement - Not required if welded steel construction of heavier wall thickness and/or higher strengthsteel, coated and wrapped, cathodically protected and other measures as required. Limits of pro- tection are the same as that for encase- ment. Location - Near RCW line. Crossings approx. perpendicular. - Depth - 18" usual and 12" minimum or ½ diam. under subgrade. 24" total clear depth below surface. Encasement - Same as for encased high pressure lines or none if cathodically protected and agree to no future pavement cuts. Location - Near. ROW line. Crossings approx. perpendicular. Depth - 18" usual and 12" minimum or ½ diam. under subgrade. 24" total clear 4epth below surface. Encasement - Under roadways to center of ditch and under medians. Exception allowed for wide meidan, for pipe of 30" or greater diam, under low volume frontage roads, and under side road entrances where justified by traffic, road condition, and local practice. Location - Near ROW line. Crossings approx. perpendicular. Depth - 18" usual and 12" minimum or ' diam. under subgrade. 24" total clear depth below surface. Encasement - Only i./ under pressure or does not meet standards. If encased, same as water lines. Materials - Cast iron or equal at crossings of high volume roadways. Others permitted for longitudinal lines and crossings of low volume roadways. EXCEPTIONS FOR EXISTING LINES Location - May deviate from perpendicular. Urban longitudinal lines may remain in outer separation. Depth - Minimum total depth of 24" if encased or 30" if not encased may be permitted. (Longitudinal) Encasement - Under roadways, ditches, structures and center medians. Exceptions allowed for wide medians. Location - May deviate from perpendicular. Urban longitudinal lines may remain in outer separation. Markers - Required. Depih - No exceptions permitted. Encasement - Not required if welded steel con- struction of heavier wall thickness and/or higher strength steel, coated and wrapped, cathodically protected and other measures as required. Limits of protection are the same as that for encasement. Location - May deviate from perpendicular. Urban longitudinal -lines may remain except under center medians, roadways in the controlled access area, or any other roadway to be (re) constructed, provided there will be no future pavement cuts other than on low volume frontage roads. Depth - Minimum total depth of 18".may be permitted. Encasement - No exception permitted. Location - May deviate from perpendicular. Urban longitudinal lines may remain except under center medians. roadways within the controlled access area, or any -other roadway tobe(re) constructed, provided there will be no future pavement cuts other than on low volume frontage roads. Depth•- Mini.man total depth of '18" may be permitted. Encasement - May be omitted for pipe of 24" or greater diam. under low volume frontage roads. Location - hay deviate from perpendicular. Urban longitudinal lines may remain except under center medians and roadways in the controlled access area, provided they are of satisfactory quality and depth, manholes are adjusted, and future ser- vice lines will not violate access control or disturb any roadway. Materials - Requirements for materials may be waived if line is of satisfactory quality. Depth - Minimum total depth of 18 may be permitted. Plate 8 Sheet 56 of 61 m 1 a) 4, 4) A- E O U t, O z v I O LcF1 r S Utility Manual CONTROLLED ACCESS HIGHWAYS STANDARD REQUIREMENTS Location - Longitudinal.. -1' to 3' from RCW or behind outer curb. Short exceptions permitted. Crossings- -No poles in median. Pole In outer separation only when RCW is over 300', and must be 30' from main lane and 70' fro,a ramp shoulder edge'. Crossings approx, perpendicu- lar. At structures, reroute around approaches or sufficient to provide 150' horizontal or 30' Veu•cical Clearance. Vertical Clearance - 18' for communication lines and 22' or greater as required by law for power lines. '1)'De of Construction - Longitudinal lines shall be single pole construction. Location - Near RCW line, crossings approx. perpendicular. Longitudinal lines may be placed by plowing or open trench. Markers - Required. e th - 18" usual and 12" minimum of i thorn. of casing under suhgrade. 7D" total clear depth at All points where encased. Encasement - Under roadways, ditches, struc- tures and center medians. Exceptions allowed for wide medians. 0• Location - Near ROW line., Crossings approx. perpendicular. zO Depth - 18" under pavement. 24" outside pave- ment area, including ditches. O Z Encasement - None required unless directed by District Engineer for hazardous locations such W as near bridges, Structures,'etc. Where encase - merit not installed, utility should Agree. In no 'pavement cilia. EXCEPTIONS FOR EXISTING LINES Location - May deviate from perpendicular, Vertical Clearance - No exception permitted. 'hpe of Construction - No exception permitted, Location - May deviate from perpendicular. Urban longitudinal lines may remain in outer Separation. ik•nth - Minimum total depth of 24" if encased or '!0' if not encased may be permitted. Encasement - No exceptions Permitted. Location - May deviate from perpendicular. Where encasement not installed, utility should agree to no pavement cuts, Longitudinal lines may remain. except under center medians, through -traffic road- ways or connecting roadvays•(including shoulders). Depth - Where materials and other conditions justify, exceptions may he permitted for reduction of 6" from standard requfremmntn. Rev. 8-75 Plate 8 Sheet 57 of 61 I 0 0 I I 0 0 0 IF U 0 0 0 0 I 0 II 0 CERTIFICATE OF INSURANCE TO: CITY OF FORT WORTH Date: NAME OF PROJECT: PROJECT NUMBER: IS TO CERTIFY THAT: is, at the date of this certificate, Insured by this Company with respect to the business operations hereinafter described, for the type of insurance and accordance with provisions of the standard policies used by this Company, and further hereinafter described. Exceptions to standard policy noted on reverse side hereof. TYPE OF INSURANCE Policy Effective Expires Limits of Liability Worker's Compensation Comprehensive General Bodily Injury: Liability Insurance (Public Ea. Occurrence: $ Liability) Property Damage: Ea. Occurrence: $ Blasting Ea. Occurrence: $ Collapse of Building or structures adjacent to Ea. Occurrence: $ excavations Damage to Underground Utilities Ea. Occurrence: $ Builder's Risk Comprehensive Bodily Injury: Automobile Liability Ea. Person: $ Ea. Occurrence: $ Property Damage: Ea. Occurrence: $ Bodily Injury: Contractual Liability Ed. Occurrence: $ Property Damage: Ea. Occurrence: $ Other Locations covered: Description of operations covered: The above policies either in the body thereof or by appropriate endorsement provided that they may not be changed or canceled by the insurer in less than five (5) days after the insured has received written notice of such change/or cancellation. Where applicable local laws or regulations require more than five (5) days actual notice of change or cancellation to be assured, the above policies contain such special requirements, either in the body thereof or by appropriate endorsement thereto attached. Agency Fort Worth Agent By Address Title ti 1 II 0 I C 0 0 I' 0 Ii CONTRACTOR COMPLIANCE WITH WORKERS' COMPENSATION LAW Pursuant to V.T.C.A Labor Code Section 406.096, Contractor certifies that it provides workers' compensation insurance coverage for all its employees employed on city of Fort Worth Project Number PS46- 070460410280 CONATSER CONSTRUCTION, INC. CONT OR B• Y PC_, ice e, Title 8-10-gq Date QSTATE OF TEXAS § C I 0 0 I 0 0 Ii COUNTY OF TARRANT § BEFORE ME, the undersigned authority, on this day personally appeared known to me be the person whose name is subscribed to the foregoing instrument, and acknowled&l to me that he executed the same as the act and deed of nn ,r C tshgACfi'arr , Tyra„ for the purpose and consideration therein expressed and in the capacity therein stated. GIVEN UNDER MY HAND AND SEAL OF OFFICE this IOC" day of Nota Public in and for the State of Texas JEANE OAKMAH NOTARY PUBLIC State of Texas OF Comm. 03-254)03 Ii BOND NO: S242496 u I I A A I PERFORMANCE BOND THE STATE OF TEXAS COUNTY OF TARRANT KNOW ALL MEN BY THESE PRESENTS: That we (1) CONATSER CONSTRUCTION, INC. a (2) CORPORATION of TEXAS, hereinafter call Principal, and (3) UNION INS. CO. OF PROVIDENCE a corporation organized and existing under the laws of the State and fully authorized to transact business in the State of Texas, as Surety, are held and firmly bound unto the City of Fort Worth, a municipal corporation organized and existing under the laws of the State of Texas, hereinafter called Owner, in the penal sum of: TWO MILLION ONE HUNDRED FORTY-EIGHT THOUSAND NINE HUNDRED SIXTY-THREE AND NO/100. ($2,148,963.00) Dollars in lawful money of the United States, to be paid in Fort Worth, Tarrant County, Texas, for the payment of which sum well and truly be made, we hereby bind ourselves, our heirs, executors, administrators and successors, jointly and severally, firmly by these presents. THE CONDITION OF THIS of: OBLIGATION is such that Whereas, the Principal entered into a certain contract with the City of Fort Worth, the Owner, dated the of ,a copy of which is hereto attached and made a part hereof, for the construction of: MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNITS 1 AND 4 designated as Project No. (s) PS46-070460410280, a copy of which contract is hereby attached, referred to, and made a part hereof as fully and to the same extent as if copied at length herein, such project and construction being hereinafter referred to as the "work". I NOW THEREFORE, if the Principal shall well, truly, and faithfully perform the work in accordance with the plans, specifications, and contract documents during the original term thereof, and any extensions thereof which may be granted by the Owner, with or without notice to the Surety, and if he shall satisfy all claims and demands incurred under such contract, and shall fully indemnify and save harmless the Owner from all costs and damages which it may suffer by reason of failure to do so, and shall reimburse and repay the Owner all outlay and expense which the Owner may incur in making good any default, then this obligation shall be void; otherwise to remain in full force and effect. I I A Fl PROVIDED FURTHER, that if any legal action filed upon this bond, venue shall lie in Tarrant County, State of Texas. I A I I I I I I AND PROVIDED FURTHER, that the said Surety, for value received, hereby stipulates and agrees that no change, extension of time, alteration or addition to the terms of the contract or to the work to be performed thereunder or the specifications accompanying the same shall in any wise affect its obligations on this bond, and it does hereby waive notice of any such change, extension of time, alteration or addition to the terms of the contract or to the work or to the specifications. IN WITNESS WHEREOF, this instrument is executed in 10 counterparts each one of which shall be deemed an original, this the of - - - - - ATTEST: 1JU 201999 CONATSER CONSTRUCTION, INC. (Principal) Secretary (SEAL) Witness as to Principal Cheryl Conatser 5327 Wichita St., Fort Worth, TX 76119 Address ATTEST: (Surety) Secretary (SEAL) OOJJ Witness as t Surety Car lyn Maples 2501 Parkview Dr., Ste. #100 (Address)Fort Worth, TX 76102 PRINCIP (4) BY: r Conatser T';' PO BOX 15804 FORT WORTH, TX 76119 (Address) UNION INSURANCE CO. OF PROVIDENCE Surety B (Attorney n -fact) (5) Glenna S. Davis P. O. Box 712 Des Moines, Iowa 50303 (Address) NOTE: Date of Bond must not be prior to date of Contract (1) Correct Name of Contractor (2) A Corporation, a Partnership or an Individual, as case may be (3) Correct name of Surety (4) If contractor is Partnership all Partners should execute Bond (5) A true copy of Power of Attorney shall be attached to Bond by Attorney -in -Fact.. F2 BOND NO: S242496 PAYMENT BOND THE STATE OF TEXAS § COUNTY OF TARRANT § KNOW ALL MEN BY THESE PRESENTS: That we (1) CONATSER CONSTRUCTION, INC. a (2) Corporation of Texas, hereinafter call Principal, and (3) ANION TN S - rn - OF PRnyTnFNc,Ea corporation organized and existing under the laws of the State and fully authorized to transact business in the State of Texas, as Surety, are held and firmly bound unto the City of Fort Worth, a municipal corporation organized and existing under the laws of the State of Texas, hereinafter called Owner, and unto all person, firms, and corporations who may furnish materials, for or perform labor upon the building or improvements hereinafter referred to in the penal sum of: TWO MILLION ONE HUNDRED FORTY-EIGHT THOUSAND NINE HUNDRED SIXTY-THREE AND NO/100................................................................................................................................... ($2,148,963.00) Dollars in lawful money of the United States, to be paid in Fort Worth, Tarrant County, Texas, for the payment of which sum well and truly be made, we hereby bind ourselves, our heirs, executors, administrators and successors, jointly and severally, firmly to these presents. THE CONDITION OF THIS OBLIGATION is such that Whereas, the Principal entered into a certain contract with the City of Fort Worth, the Owner, dated the day of A.D. , 1999, a copy of which is hereto attached and made a part thereof, for the construction of:: JUL 2 0 1999 MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNITS 1 AND 4 Project No. (s) PS46-070460410280 a copy of which is hereto attached, referred to and made a part hereof as fully and to the same extent as if copied at length herein, such project and construction being hereinafter referred to as the "work". t NOW THEREFORE, the condition of this obligation is such that, if the Principal shall promptly make payment to all claimants as defined in Article 5160, Revised Civil Statutes of Texas, supplying labor and materials in the prosecution of the work provided for in said Contract, then this obligation shall be null and void, otherwise it shall remain in full force and effect. F10 THE BOND IS MADE AND ENTERED into solely for the protection of all claimants supplying labor and material in the prosecution of the work provided for in said Contract, as claimants are defined in said Article 5160, and all such claimants shall have a direct right of action under the bond as provided in Article 5160 of the Revised Civil Statutes. PROVIDED FURTHER, that if any legal action be filed upon this bond, venue shall lie in Tarrant County, State of Texas, that the said Surety, for value received, hereby stipulates and agrees that no change, extension of time, alteration of addition to the terms of the contract or to the work to be performed thereunder or the specification s accompanying the same shall in any wise affect its obligation on this bond, and it does hereby waive notice of any such change, extension of time, alteration or addition to the terms of the contract or to the work to the specifications. PROVIDED FURTHER, that no final settlement between the Owner and the Contractor shall abridge the right of any beneficiary hereunder whose claim may be unsatisfied. IN WITNESS WHEREOF, this instrument is executed in 10 counterparts each one of which shall be deemed an original, this the day of A.D., 1999. JUL20 0 1999 CONATSER CONSTRUCTION, INC. ATT ST: -1 fn ti L`�P�yL.n___ ice_ BY: e y Conatser itle: President (Principal) Secretary PO BOX 15804 FORT WORTH, TX 76119 (SEAL) (Address) Witness as to Principal Cheryl Conatser 5327 Wichita St., Fort Worth, TX Address UNION INSURANCE CO. OF PR V ENCE BY• 761 19 (Attorne -in-fact (5) Glenna S. Davis ATTEST: (Address) * P. 0. Box 712 (Surety) Secretary Des Moines, Iowa 50303 (SEAL) Can 0 ''— Witness as to ►rety Carolyn Maples 2501 Parkview Dr., Ste. #100 (Address) Fort Worth, TX 76102 (Address) NOTE: Date of Bond must not be prior to date of contract (1) Correct Name of Contractor (2) A Corporation, a Partnership or an Individual, as case may be (3) Correct name of Surety (4) If contractor is Partnership all Partners should execute Bond (5) A true copy of Power of Attorney shall be attached to Bond by Attorney -in -Fact.. I BOND NO: S242496 I THE STATE OF TEXAS MAINTENANCE BOND M COUNTY OF TARRANT § KNOW ALL MEN BY THESE PRESENTS: That (1) CONATSER CONSTRUCTION, INC., as Principal, acting herein by and through (2) its duly authorized Corporation and (3) UNION INSURANCE CO. OF PROVIDENCE a corporation organized under the laws of the State of TEXAS, as surety, do hereby acknowledge themselves to be held and bound to pay unto the City of Fort Worth, A Municipal Corporation, chartered by virtue of Constitution and laws of the State of Texas, at Fort Worth, in Tarrant County, Texas the sum of TWO MILLION ONE HUNDRED FORTY-EIGHT THOUSAND NINE HUNDRED SIXTY-THREE AND NO/100................................................................................................................................ ($2,148,963.00) in lawful money of the United States, for the payment of which sum well and truly be made unto 'said City of Fort Worth and its successors, said Contractor and surety do hereby bind themselves, their heirs, executors, administrators, assigns and successors, jointly and severally. This obligation is conditioned, however; that, WHEREAS, the Principal has entered into a certain contract with the City of Fort Worth#^fQL 2 0 199 the performance of the following described public work and the construction of the following described public improvements: MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNITS 1 AND 4 of same being referred to herein and in said contract as the Work and being designated as project number PS46- 070460410280 and said contract, including all of the specifications, conditions and written instruments referred to therein as contract documents being hereby incorporated herein by reference for all purposes and made a part hereof, the same as if set out verbatim herein; and , WHEREAS, in said Contract, Contractor binds itself to use such materials and to so construct the work that it will remain in good repair and condition for and during the period One (1) Year after the date of the fmal acceptance of the work by the City; and WHEREAS, said Contractor binds itself to maintain said work in good repair and condition for said term of One (1) Year; and, WHEREAS, said Contractor binds itself to repair or reconstruct the work in whole or in part at any time within said period, if in the opinion of the Director of the Water Department of the City of Fort Worth, it be necessary; and, I I I I J 1 WHEREAS, said Contractor binds itself, upon receiving notice of the need therefor to repair or reconstruct said work as herein provided. NOW THEREFORE, if said Contractor shall keep and perform its said agreement to maintain, repair or reconstruct said work in accordance with all the terms and conditions of said Contract, these presents shall be null and void, and have no force or effect. Otherwise this Bond shall be and remain in full force and effect, and said City shall have and recover from the said Contractor and its surety damages in the premises prescribed by said Contract. This obligation shall be continuing one and successive recoveries may be had hereon for successive breaches until the full amount hereof is exhausted. WHEREAS, all parties covenant and agree that if any legal action be filed upon this bond, venue shall lie in Tarrant County, Texas; and, IN WITNESS WI-9REOF, this instrument is executed in 10 counterparts, each one of which shall be deemed an original, dated JUL 2 0 1999. ATTEST: Principal) Secretary (Seal) CONATSER CONSTRUCTION, INC. PRINCIPAL 4) BY: erry Conatser Title: President Witness as to Principal Cheryl Conatser 5327 Wichita St., Fort Worth, '£X 76119 (Address) ATTEST: (Surety) Secretary (SEAL) Witness as to urety Carolyn Maples PO BOX 15804 FORT WORTH, TX 76119 (Address) rety BY. (Attorney -in- act) ) rlanna S. Davis, P. O. Bcx 712 _. (Address) Des Moines, Iowa 50303 NOTE: Date of Bond must not be prior to date of Contract (1) Correct Name of Contractor (2) A Corporation, a partnership or an Individual, as case may be (3) Correct name of Surety (4) If Contractor is Partnership all Partners should execute Bond (5) A true copy of Power of Attorney shall be attached to Bond by Attorney -in -Fact. F6 EMC Insurance Companies P.O. Box 712 • Des Moines, Iowa 50303 N�3 8 3 9 6 4 . CERTIFICATE OF AUTHORITY INDIVIDUAL ATTORNEY -IN -FACT KNOW ALL MEN BY THESE PRESENTS, that: 1. Employers Mutual Casualty Company, an Iowa Corporation 5. Dakota Fire Insurance Company, a North Dakota Corporation 2. EMCASCO Insurance Company, an Iowa Corporation 6. EMC Property & Casualty Company, an Iowa Corporation 3. Union Insurance Company of Providence, an Iowa Corporation 7. The Hamilton Mutual Insurance Company, an Ohio Corporation 4. Illinois EMCASCO Insurance Company, an Illinois Corporation hereinafter referred to severally as "Company" and collectively as "Companies", each does, by these presents, make, constitute and appoint: CATHY VINSON, VICKIE A. HOUARA, GWEN W. BIEHLER, MICHAEL A. DELABANO, RICK BONDURANT, GLENNA S. DAVIS, INDIVIDUALLY, FORT WORTH, TEXAS......................................................................................................................................................... its true and lawful attorney -in -fact, with full power and authority conferred to sign, seal, and execute its lawful bonds, undertakings, and other obligatory instruments of a similar nature as follows: IN AN AMOUNT NOT EXCEEDING TEN MILLION DOLLARS............................................................................................... ($10,000,000.00) and to bind each Company thereby as fully and to the same extent as if such instruments were signed by the duly authorized officers of each such Company, and all of the acts of said attorney pursuant to the authority hereby given are hereby ratified and confirmed. The authority hereby granted shall expire April 1, 2002 unless sooner revoked. AUTHORITY FOR POWER OF ATTORNEY This Power -of -Attorney is made and executed pursuant to and by the authority of the following resolution of the Boards of Directors of each of the Companies at a regularly scheduled meeting of each company duly called and held in 1999: RESOLVED: The President and Chief Executive Officer, any Vice President, the Treasurer and the Secretary of Employers Mutual Casualty Company shall have power and authority to (1) appoint attorneys -in -fact and authorize them to execute on behalf of each Company and attach the seal of the Company thereto, bonds and undertakings, recognizances, contracts of indemnity and other writings obligatory in the nature thereof, and (2) to remove any such attorney -in -fact at any time and revoke the power and authority given to him or her. Attorneys -in -fact shall have power and authority, subject to the terms and limitations of the power -of -attorney issued to them, to execute and deliver on behalf of the Company, and to attach the seal of the Company thereto, bonds and undertakings, recognizances, contracts of indemnity and other writings obligatory in the nature thereof, and any such instrument executed by any such attorney -in -fact shall be fully and in all respects binding upon the Company. Certification as to the validity of any power -of -attorney authorized herein made by an officer of Employers Mutual Casualty Company shall be fully and in all respects binding upon this Company. The facsimile or mechanically reproduced signature of such officer, whether made heretofore or hereafter, wherever appearing upon a certified copy of any power -of -attorney of the Company, shall be valid and binding upon the Company with the same force and affect as though manually affixed. IN WITNESS WHEREOF, the Companies have caused these presents to be siged for each by their officers as shown, and the Corporate seals to be hereto affixed this 28th day of April 1999 Seals •""""' Bruce G. Kelley, Chairman V Donald L. Coughenn er �Ps�°; oR gg11 �QPN�PPo� �F° � RPORc�S� ; of Companies 2, 3, 4, 5 & 6; President Assistant Secretary of Company 1; Vice Chairman and SEAL 1863 1953 : = o-_ = CEO of Company 7 2�i •', n„`����%2O IOWA 7� .,,,,,,``,�� ",', NO," , • , 'owP .1\NSURAN' ..` �NSUR41V �.` �OUAJ OR4, O a;oPP 0 RqG �= = SEAL ? SEAL -z SEAL /0WP . '°A7'OMpINES �O MUTUq� a "•'' �4 RUTA KRUMINS yy MY COMMISSION EXPIRES '(/RP September 30, 2000 i A1\ On this28tL day of April AD 1999 before me a Notary Public in and for the State of Iowa, personally appeared Bruce G. Kelley and Donald L. Coughennower, who, being by me duly sworn, did say that they are, and are known to me to be the Chairman, President, Vice Chairman and CEO, and/or Assistant Secretary, respectively, of each of The Companies above; that the seals affixed to this instrument are the seals of said corporations; that said instrument was signed and sealed on behalf of each of the Companies by authority of their respective Boards of Directors; and that the said Bruce G. Kelley and Donald L. Coughennower, as such officers, acknowledge the execution of said instrument to be the voluntary act and deed of each of the Companies. My Commission Expires Sep er 30, 2000. CERTIFICATE Notary Public in and for the State of Iowa I, David L. Hixenbaugh, Vice President of the Companies, do hereby certify that the foregoing resolution of the Boards of Directors by each of the Companies, and this Power of Attorney issued pursuant thereto on April 28, 1999 on behalf of Cathy Vinson, Vickie A. Houara, Gwen W. Biehler, Michael A. Delabano, Rick Bondurant, Glenna S. Davis are true and correcf and are still in full force and effect. In Testimony Whereof I have subscribed my name and affixed the facsimile seal of each Company this of 6 / Vice -President PART G - CONTRACT THE STATE OF TEXAS § COUNTY OF TARRANT § JUL 2 0 1999 THIS CONTRACT, made and entered into by and between the City of Fort Worth, a home -rule municipal corporation located in Tarrant County, Texas, acting through its City Manager thereunto duly authorized so to do, Party of the First Part, hereinafter termed "OWNER", and CONATSER CONSTRUCTION, INC. of the City of FORT WORTH County of TARRANT and State of TEXAS, Party of the Second Part, hereinafter termed "CONTRACTOR". WITNESSETH: That for and in consideration of the payments and agreements hereinafter mentioned, to be made and performed by the Party of the First Part (Owner), said Party of the Second Part (Contractor) hereby agrees with the said party of the First Part (Owner) to commence and complete certain improvements described as follows: IMAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1), PART 8, UNITS 1 AND 4 I And all extra work connected therewith, under the terms as stated in the Contract Documents, and at his (their) own proper cost and expense to furnish all the materials, supplies, machinery, equipment, tools, superintendent, labor, bonds, insurance, and other accessories and services necessary to complete the I said construction, in accordance with all the requirements of the Contract Documents, which include all maps, plats, blueprints and other drawings and printed or written explanatory matter thereof, and the specifications thereof, as prepared by the Engineers employed by the Owner, each of which has been identified by the endorsement of the Contractor and the Engineers thereon, together with the Contractor's Written Proposal and the other parts of the Contract Documents hereto attached, including the Fort Worth Water Department General Contractor Documents and General Specifications, all of which are made a part hereof and collectively and constitute the entire contract. I 1 I GI The Contractor hereby agrees to commence work within ten (10) days after the date written notice to do so shall have been given to him, and to substantially complete same within the time stated in the proposal. The Owner agrees to pay the contractor in current funds for the performance of the contract in accordance with the Proposal submitted therefor, subject to additions and deductions, as provided in the Contract Documents and all approved modifications thereof, and to make payment on account thereof as provided therein. IN WITNESS WHEREOF, the Parties to these presents have executed this Contract in 10 counterparts in the year and say first above written. City of Fort Worth, Texas (Owner) ATTEST: Party of the First part a /"> ______ BY: ASST. City Manager CW City Se etary (Seal) It i is CONATSER CONSTRUCTION, INC. PO BOX 15804 FORT WORTH, TX 76119 IContractor By: e: APPROVED: Approved as to Form and Legality: A. Douglas Rademaker, P.E. Director Department of Engineering CW Gary Steinberger, Asst. City Attorney Contract Authorization Date L APPENDIX A TWDB CONTRACT CONDITIONS PRIVITY OF CONTRACT. This contract is expected to be funded in part with funds from the Texas Water Development Board. Neither the State of Texas nor any of its departments, agencies or employees is, or will be, a party to this contract or any lower tier contract. This contract is subject to regulations contained in 31 TAC Chapter 363 in effect on the date this contract is executed. DEFINITION. The term "TWDB" means the Executive Administrator of the Texas Water Development Board, or other person who may be at the time acting in the capacity or authorized to perform the functions of such Administrator, or the authorized representative thereof. FINAL PAYMENT. The retainage and its interest earnings, if any, shall not be paid to the Contractor until the TWDB has authorized a reduction in, or release of, retainage on the contract work. REVIEW BY OWNER AND TWDB. (a) The Owner, authorized representatives and agents of the Owner, and the TWDB shall, at all times have access to and be permitted to observe and review all work, materials, equipment, payrolls, personnel records, employment conditions, material invoices, and other relevant data and records pertaining to this Contract, provided, however that all instructions and approval with respect to the work will be given to the Contractor only by the Owner through authorized representatives or agents. (b) Any such inspection or review by the TWDB shall not subject the state of Texas to any action for damages. FLOOD HAZARD INSURANCE (J This provision applies to any contract which will construct structures that are insurable under the National Flood Insurance Program of the Federal Emergency Management Agency. The Contractor shall apply for flood insurance on all insurable structures that will be built under this contract. A copy of the completed application must be provided to the owner before commencing construction of the project. The Contractor shall obtain the flood hazard insurance as soon as possible and submit a copy of the policy to the Owner. ARCHEOLOGICAL DISCOVERIES. No activity which may affect a State Archeological Landmark is authorized until the Owner has complied with the provisions of the Antiquities Code of Texas. The Owner has previously coordinated with the appropriate agencies and impacts to known cultural or archeological deposits have been avoided or mitigated. However, the Contractor may encounter unanticipated cultural or archeological deposits during construction. Ii Al -1 If archeological sites or historic structures are discovered after construction operations are begun, the Contractor shall immediately cease operations in that particular area and notify the Owner, the TWDB, and the Texas Historical Commission, (512-463-6096). The Contractor shall take reasonable steps to protect and preserve the discoveries until they have been inspected by the Owner's representative and the TWDB. The Owner will promptly coordinate with the Texas Historical Commission and any other appropriate agencies to obtain any necessary approvals or permits to enable the work to continue. The Contractor shall not resume work in the area of the discovery until authorized to do so by the Owner. ENDANGERED SPECIES. No activity is authorized that is likely to jeopardize the continued existence of a threatened or endangered species as listed or proposed for listing under the Federal Endangered Species Act (ESA), and/or the State of Texas Parks and Wildlife Code on Endangered Species, or to destroy or adversely modify the habitat of such species. If a threatened or endangered species is encountered during construction, the Contractor shall immediately cease work in the area of the encounter and notify the Owner, who will immediately implement actions in accordance with the ESA and applicable State statutes. These actions shall include reporting the encounter to the TWDB, the U.S. Fish and Wildlife Service, and the Texas Parks and Wildlife Department, obtaining any necessary approvals or permits to enable the work to continue, or implement other mitigative actions. The Contractor shall not resume construction in the area of the encounter until authorized to do so by the Owner. Ir` LAWS TO BE OBSERVED. In the execution of the Contract, the Contractor must comply with all applicable Local, State and Federal laws, including but not limited to laws concerned with labor, safety, minimum wages, and the environment. The Contractor shall make himself familiar with I and at all times shall observe and comply with all Federal, State and Local laws, ordinances and regulations which in any manner affect the conduct of the work, and shall indemnify and save harmless the Owner, the TWDB, and their representatives against any claim arising from violation of any such law, ordinance or regulation by himself or by his subcontractor or his employees. HAZARDOUS MATERIALS. Materials utilized in the project shall be free of any hazardous materials, except as may be specifically provided for in the specifications. If the Contractor encounters existing material on sites owned or controlled by the Owner or in material sources that are suspected by visual observation or smell to contain hazardous materials, the Contractor shall immediately notify the Engineer and the t Owner. The Owner will be responsible for the testing for and removal or disposition of 4 hazardous materials on sites owned or controlled by the Owner. The Owner may suspend the work, wholly or in part during the testing, removal or disposition of 1phazardous materials on sites owned or controlled by the Owner. 1Q 10 Al -2 EQUAL EMPLOYMENT OPPORTUNITY During the performance of this contract, the Contractor agrees as follows: Contractor will not discriminate against any The 9 employee or applicant for employment because of race, color, religion, sex, age, handicap, or national origin. The Contractor will take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, color, religion, sex, age, handicap, or national origin. Such action shall include, but not be limited to the following: Employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. The Contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices to be provided setting forth the provisions of this nondiscrimination clause. (2) The Contractor will, in all solicitations or advertisements for employees placed by or on behalf of the Contractor, state that all qualified applicants will - receive considerations for employment without regard to race, color, religion, sex, age, handicap, or national origin. (3) The Contractor will send to each labor union or representative of workers with which he has a collective bargaining agreement or other contract or understanding, a notice to be provided advising the said labor union or workers' representatives of the Contractor's commitments under this section, and shall post copies of the notice in conspicuous places available to employees and applicants for employees. (4) The Contractor will comply with all provisions of . Executive Order 11246 of September 24, 1965, the Age Discrimination in Employment Act of 1967,29 U.S. C.A. 621 (1985), Executive Order 12250 of November 2, 1980, the Rehabilitation Act of 1973, 29 U.S.C.A. 701 et seq. (1985), and of the rules, regulations, and relevant orders of the Secretary of Labor. (5) The Contractor will furnish all information and reports required by Executive Order 11246 of September 24, 1965, and by rules, regulations, and orders of the Secretary of Labor, or pursuant thereto, and will permit access to his books, records, and accounts by the administering agency and the Secretary of Labor for purposes of n investigation to ascertain compliance with such rules, regulations, and orders. (6) In the event of the Contractor's noncompliance with the nondiscrimination clauses of this contract or with any of the said rules, regulations, or orders, this contract may be canceled, terminated, or suspended in whole or in part and the Contractor may be declared ineligible for further Government contracts or federally assisted construction contracts in accordance with procedures authorized in Executive Order 11246 of September 24, 1965, and such other sanctions may be imposed and remedies invested as provided in Executive Order 11246 of September 24, 1965, or by rule, regulation, or order of the Secretary of Labor, or as otherwise provided by --i Law. �.. (7) The Contractor will include the portion of the sentence immediately preceding paragraph 1, and the provisions of paragraph 1 through 7, in every subcontract or Al -3 purchase order unless exempted by rules, regulations, or orders of the Secretary of Labor issued pursuant to section 204 of Executive Order 11246 of September 24, 1965, so that such provisions will be binding upon each subcontractor or vendor. The Contractor will take such action with respect to any subcontract or purchase order as the administering agency may direct as a means of enforcing such provisions, including sanctions for noncompliance: PROVIDED, HOWEVER, That in the event a Contractor becomes involved in, or is threatened with, litigation with a subcontractor or vendor as a result of such direction by the administering agency the Contractor may request the United States to enter into such litigation to protect the interest of the United States. (8) The Contractor will comply with Executive Order 11246 based on its implementation of the Equal Opportunity Clause, specific affirmative action obligations required by the Standard Federal Equal Employment Opportunity Construction Contract Specifications, as set forth in 41 CFR Part 60-4 and its efforts to meet the goals established for the geographical area where the Contract is to be performed. The hours of minority and female employment and training must be substantially uniform throughout the length of the Contract, and in each trade, and the Contractor shall make a good faith effort to employ minorities and women evenly on each of its projects. The transfer of minority or female employees or trainees from Contractor to Contractor or from project to project for the sole purpose of meeting the Contractor's goals shall be a violation of the Contract, the Executive Order, and the regulations in 41 CFR Part 60-4. The goals are expressed as percentages of the U total hours of employment and training of minority and female utilization the Contractor should reasonably be able to achieve in each construction trade in which it has employees in the covered area. Goals are published periodically in the Federal Register in notice form, and such notices may be obtained from any office of federal contract compliance's programs office or from federal procurement contracting officers (512) 229-5835. The Contractor is expected to make substantially uniform progress toward its goal in each craft during the period specified. Whenever the Contractor, or any subcontractor at any tier, subcontracts a portion of the work involving any construction trade, it shall physically include in each subcontract in excess of $10,000 the provisions of these specifications and the notice which contains the applicable goals set for minority and female participation and which is set forth in the solicitations from which this contract resulted. ElAl -4 'ci S.R.F. 1. The Contractor shall complete the two attached Texas Water Development Board forms at time of contract execution. 2. The Contractor shall submit along with the by -monthly payroll certification the attached form SRF-74, Certification By Contractor for Labor Standard Compliance. 'I S Q S S 0 0 0 'I 0 atTULi-02-1999 09:17 FROM:CONATSER CONSTRUCTIN 8175344556 T0:817 871 7854 P.002'003 0 0 0 CONTRACTOR'S ACT OF ASSURANCE STATE OF TEXAS COUNTY OF Ta_ rrent BEFORE ME, Jeane Oak, A Notary Public duly commissioned and qualified in and for the County of Tarrant iti the State of Texas came and appeared Conatser Construction, Inc,, as represented by Jerry Conatser, the corporation's President who declares he/she is authorized to represent Conatser Construction, Inc,, pursuant to provisions of a resolution adopted by said corporation on the fifteenth day of Mey4. 199. (a duly certified copy of such resolution is attached to and is hereby made a part of this document). Jrry Conatser, as the representative of Conatser Construction Inc. declares that Conatser Construction, Inc, assures the Texas Water Development Board that it will construct Main 390 Drainage Area Sanitary $ewer System Rehabilitation & Improvements (Group 6. Contract 1).Part 8 Units 1. 2, 3 and 4 project at Ett Wo th Texas, in accordance with sound construction practice, all laws of the State of Texas, and tht; rules of the Texas Water Development Board. GIVEN UNDER MY HAND and seal of the office this 7 day of 1999 AD, JEAUR DA MAN NOTARY PUBLIC l State of TOM unto !lame tom. Cap. D3 r jtr My Commission Expires 3_ J 02-1999 09:17 FROM:CONATSER CONSTRUCTIN 8175344556 rti CLvP• y pMp M' drl ULWr � • Mlr' II 11 P I a.l Q ; „ ' tr,r'7 CONTRACTORS ACT OF ASSURANCE RESOLUTION Conatser Construction, Inc[1 „ Name x W t., c ' I hereby certify that is was RESOLVED by a quorum of the directors of the U ____ Conatser Construction Inc. Name ot'Corporation U_____ meeting on the day of May, 1991, that Jerry Conatser be, and hereby is authorized ,Ir' 1; to act on behalf of Conatser Construction, Inc., as its representative, in all business {] p di transactions conducted in the State of Texas, and; =ittt�I P UThat all above resolution was unanimously ratified by the Board of Directors at said meeting and that the resolution has not been re scinded or amended and is now T0:817 871 7654 P.0@3'003 in full forces and effect and; In authentication of the adoption of this resolution, I subscribe my name and '!lP4II affix the seal of the corporation this Z7 day of .1c..y4,1999. r P Gr N .4SCCtetury M 1' G 1 (scat) LI 0 n . .w �IruN a JJAPPENDIX A QTWDB CONTRACT CONDITIONS PRIVITY OF CONTRACT. fl This contract is expected to be funded in part with funds from the Texas Water Development Board. Neither the State of Texas nor any of its departments, agencies or employees is, or will be, a party to this contract or any lower tier contract. This contract Q is subject to regulations contained in 31 TAC Chapter 363 in effect on the date this contract is executed. 0 El D LI 0 0 0 0 0 0 0 0 0 DEFINITION. The term "TWDB" means the Executive Administrator of the Texas Water Development Board, or other person who may be at the time acting in the capacity or authorized to perform the functions of such Administrator, or the authorized representative thereof. FINAL PAYMENT. The retainage and its interest earnings, if any, shall not be paid to the Contractor until the TWDB has authorized a reduction in, or release of, retainage on the contract work. REVIEW BY OWNER AND TWDB. (a) The Owner, authorized representatives and agents of the Owner, and the TWDB shall, at all times have access to and be permitted to observe and review all work, materials, equipment, payrolls, personnel records, employment conditions, material invoices, and other relevant data and records pertaining to this Contract, provided, however that all instructions and approval with respect to the work will be given to the Contractor only by the Owner through authorized representatives or agents. (b) Any such inspection or review by the TWDB shall not subject the state of Texas to any action for damages. FLOOD HAZARD INSURANCE This provision applies to any contract which will construct structures that are insurable under the National Flood Insurance Program of the Federal Emergency Management Agency. The Contractor shall apply for flood insurance on all insurable structures that will be built under this contract. A copy of the completed application must be provided to the owner before commencing construction of the project. The Contractor shall obtain the flood hazard insurance as soon as possible and submit a copy of the policy to the Owner. ARCHEOLOGICAL DISCOVERIES. No activity which may affect a State Archeological Landmark is authorized until the Owner has complied with the provisions of the Antiquities Code of Texas. The Owner has previously coordinated with the appropriate agencies and impacts to known cultural or archeological deposits have been avoided or mitigated. However, the Contractor may encounter unanticipated cultural or archeological deposits during construction. 0 0 0 If archeological sites or historic structures are discovered after construction operations are begun, the Contractor shall immediately cease operations in that particular area and notify the Owner, the TWDB, and the Texas Historical Commission, (512-463-6096). The Contractor shall take reasonable steps to protect and preserve the discoveries until they have been inspected by the Owner's representative and the TWDB. The Owner will promptly coordinate with the Texas Historical Commission and any other appropriate agencies to obtain any necessary approvals or permits to enable the work to continue. The Contractor shall not resume work in the area of the discovery until authorized to do fjso by the Owner. ENDANGERED SPECIES. LiNo activity is authorized that is likely to jeopardize the continued existence of a threatened or endangered species as listed or proposed for listing under the Federal Endangered Species Act (ESA), and/or the State of Texas Parks and Wildlife Code on Endangered Species, or to destroy or adversely modify the habitat of such species. U If a threatened or endangered species is encountered during construction, the Contractor shall immediately cease work in the area of the encounter and notify the Owner, who will immediately implement actions in accordance with the ESA and applicable State statutes. These actions shall include reporting the encounter to the TWDB, the U.S. Fish and Wildlife Service, and the Texas Parks and Wildlife Department, obtaining any necessary approvals or permits to enable the work to continue, or implement other mitigative actions. The Contractor shall not resume construction in the area of the encounter until authorized to do so by the Owner. LAWS TO BE OBSERVED. In the execution of the Contract, the Contractor must comply with all applicable Local, State and Federal laws, including but not limited to laws concerned with labor, safety, minimum wages, and the environment. The Contractor shall make himself familiar with and at all times shall observe and comply with all Federal, State and Local laws, ordinances and regulations which in any manner affect the conduct of the work, and shall indemnify and save harmless the Owner, the TWDB, and their representatives against any claim arising from violation of any such law, ordinance or regulation by himself or by his subcontractor or his employees. HAZARDOUS MATERIALS. Materials utilized in the project shall be free of any hazardous materials, except as may be specifically provided for in the specifications. If the Contractor encounters existing material on sites owned or controlled by the Owner or in material sources that are suspected by visual observation or smell to contain hazardous materials, the Contractor shall immediately notify the Engineer and the Owner. The Owner will be responsible for the testing for and removal or disposition of hazardous materials on sites owned or controlled by the Owner. The Owner may suspend the work, wholly or in part during the testing, removal or disposition of hazardous materials on sites owned or controlled by the Owner. I I J ci 0 0 0 0 ci 0 a 0 0 ci 0 0 a a 0 0 EQUAL EMPLOYMENT OPPORTUNITY During the performance of this contract, the Contractor agrees as follows: (1) The Contractor will not discriminate against any employee or applicant for employment because of race, color, religion, sex, age, handicap, or national origin. The Contractor will take affirmative action to ensure that applicants are employed, and that employees are treated during employment without regard to their race, color, religion, sex, age, handicap, or national origin. Such action shall include, but not be limited to the following: Employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship. The Contractor agrees to post in conspicuous places, available to employees and applicants for employment, notices to be provided setting forth the provisions of this nondiscrimination clause. (2) The Contractor will, in all solicitations or advertisements for employees placed by or on behalf of the Contractor, state that all qualified applicants will receive considerations for employment without regard to race, color, religion, sex, age, handicap, or national origin. (3) The Contractor will send to each labor union or representative of workers with which he has a collective bargaining agreement or other contract or understanding, a notice to be provided advising the said labor union or workers' representatives of the Contractor's commitments under this section, and shall post copies of the notice in conspicuous places available to employees and applicants for employees. (4) The Contractor will comply with all provisions of Executive Order 11246 of September 24, 1965, the Age Discrimination in Employment Act of 1967,29 U.S. C.A. 621 (1985), Executive Order 12250 of November 2, 1980, the Rehabilitation Act of 1973, 29 U.S.C.A. 701 et seq. (1985), and of the rules, regulations, and relevant orders of the Secretary of Labor. (5) The Contractor will furnish all information and reports required by Executive Order 11246 of September 24, 1965, and by rules, regulations, and orders of the Secretary of Labor, or pursuant thereto, and will permit access to his books, records, and accounts by the administering agency and the Secretary of Labor for purposes of investigation to ascertain compliance with such rules, regulations, and orders. (6) In the event of the Contractor's noncompliance with the nondiscrimination clauses of this contract or with any of the said rules, regulations, or orders, this contract may be canceled, terminated, or suspended in whole or in part and the Contractor may be declared ineligible for further Government contracts or federally assisted construction contracts in accordance with procedures authorized in Executive Order 11246 of September 24, 1965, and such other sanctions may be imposed and remedies invested as provided in Executive Order 11246 of September 24, 1965, or 0 0 0 a 0 0 0 ill I 0 0 0 0 a LI 0 0 by rule, regulation, or order of the Secretary of Labor, or as otherwise provided by Law. (7) The Contractor will include the portion of the sentence immediately preceding paragraph 1, and the provisions of paragraph 1 through 7, in every subcontract or purchase order unless exempted by rules, regulations, or orders of the Secretary of Labor issued pursuant to section 204 of Executive Order 11246 of September 24, 1965, so that such provisions will be binding upon each subcontractor or vendor. The Contractor will take such action with respect to any subcontract or purchase order as the administering agency may direct as a means of enforcing such provisions, including sanctions for noncompliance: PROVIDED, HOWEVER, That in the event a Contractor becomes involved in, or is threatened with, litigation with a subcontractor or vendor as a result of such direction by the administering agency the Contractor may request the United States to enter into such litigation to protect the interest of the United States. (8) The Contractor will comply with Executive Order 11246 based on its implementation of the Equal Opportunity Clause, specific affirmative action obligations required by the Standard Federal Equal Employment Opportunity Construction Contract Specifications, as set forth in 41 CFR Part 60-4 and its efforts to meet the goals established for the geographical area where the Contract is to be performed. The hours of minority and female employment and training must be substantially uniform throughout the length of the Contract, and in each trade, and the Contractor shall make a good faith effort to employ minorities and women evenly on each of its projects. The transfer of minority or female employees or trainees from Contractor to Contractor or from project to project for the sole purpose of meeting the Contractor's goals shall be a violation of the Contract, the Executive Order, and the regulations in 41 CFR Part 60-4. The goals are expressed as percentages of the total hours of employment and training of minority and female utilization the Contractor should reasonably be able to achieve in each construction trade in which it has employees in the covered area. Goals are published periodically in the Federal Register in notice form, and such notices may be obtained from any office of federal contract compliance's programs office or from federal procurement contracting officers (512) 229-5835. The Contractor is expected to make substantially uniform progress toward its goal in each craft during the period specified. Whenever the Contractor, or any subcontractor at any tier, subcontracts a portion of the work involving any construction trade, it shall physically include in each subcontract in excess of $10,000 the provisions of these specifications and the notice which contains the applicable goals set for minority and female participation and which is set forth in the solicitations from which this contract resulted. a i;i S.R.F. Ii1. The Contractor shall complete the two attached Texas Water Development Board forms at time of contract execution. 0 D 0 0 0 0 0 D 0 0 0 I 0 0 a CONTRACTOR'S ACT OF ASSURANCE STATE OF TEXAS COUNTY OF BEFORE ME, and qualified in and for the County of came and appeared the corporation's a Notary Public duly commissioned in the State of Texas as represented by who declares he/she is authorized to represent pursuant to provisions of a resolution adopted by said corporation on the day of . 19_ (a duly certified copy of such resolution is attached to and is hereby made a part of this document). as the representative of declares that assures the Texas Water Development Board that it will construct project at Texas, in accordance with sound construction practice, all laws of the State of Texas, and the rules of the Texas Water Development Board. GIVEN UNDER MY HAND and seal of office this day of 199 AD My Commission expires Printed Name A3-1 CONTRACTOR'S ACT OF ASSURANCE RESOLUTION Name I hereby certify that it was RESOLVED by a quorum of the directors of the Name of Corporation meeting on the day of , 19 , that be, and hereby is authorized to act on behalf of Name of Corporation as its representative, in all business transactions conducted in the State of Texas, and; That all above resolution was unanimously ratified by the Board of Directors at said meeting and that the resolution has not been rescinded or amended and is now in full forces and effect; and; In authentication of the adoption of this resolution, I subscribe my name and affix the seal of the corporation this day of , 199 Secretary (seal) A4-1 a APPENDIX B EASEMENT DOCUMENTS Four copies (in 3 -ring binders) of all the easements (temporary construction and permanent) and right -of -entry agreements obtained for this project are available for examination at the plans desk of the Department of Engineering. Bidders may review the copies of the easements upon request. The terms of all Special Provisions or a Conditions for easements shall be applicable. The responsive low bidder shall be furnished with two copies of the easement documents after award of the contract. Bidders shall not remove any of the four copies from the plans desk. a 0 IF II 0 0 a 0 0 D a 0 I AB -1 a City of Fort Worth, Texas "elgor And Council Communication DATE REFERENCE NUMBER LOG NAME PAGE 7/20/99 **C-17532 30ROSEDALE 1 of 2 SUBJECT AWARD OF CONTRACT TO CONATSER CONSTRUCTION, INC. FOR MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1) PART 8, UNITS 1 AND 4 RECOMMENDATION: It is recommended that the City Council authorize the City Manager to execute a contract with Conatser Construction, Inc. in the amount of $2,148,963.00 for Main 390 Drainage Area Sanitary Sewer System Rehabilitation and Improvements (Group 6, Contract 1) Part 8, Units 1 and 4. DISCUSSION: On February 24, 1998 (M&C C-16626), the City Council authorized the City Manager to execute an engineering agreement with J. B. Davies, Inc. to prepare plans and specifications for the reduction of inflow/infiltration in sanitary sewer main 390 drainage area. This project is part of the City's Integrated Wet Weather Wastewater Management Program to comply with an administrative order from the U.S. Environmental Protection Agency to eliminate sewer overflows from the City's wastewater collection system. Unit 1 project is generally bound on the north by Rosedale Street, on the south by Berry Street, on the east by Mitchell Boulevard, and on the west by U.S. Highway 287. The proposed improvements consist of the replacement of approximately 4,600 linear feet of primarily 8 -inch sewer pipe. The project is located in COUNCIL DISTRICT 8, Mapsco 77 M, N, S. Unit 4 project is generally bound on the north by Ramey Avenue, on the south by Berry Street, on the east by Miller Avenue, and on the west by Bishop Street. The proposed improvements consist of the replacement of approximately 7,600 linear feet of primarily 8 -inch sewer pipe. The project is located in COUNCIL DISTRICT 5, Mapsco 78 U, V. The project was advertised for bid on April 29 and May 6, 1999. On May 27, 1999, the following bids were received: UNIT 1: BIDDER AMOUNT TIME OF COMPLETION Conatser Construction. Inc. $ 867,533.50 90 Calendar Days Jackson Construction, Inc. 1,130,608.00 Conatser Construction. Inc. $1.281.429.50 120 Calendar Days Jackson Construction, Inc. 1,905,965.00 City of Fort Worth, Texas "agor and council Communication DATE REFERENCE NUMBER LOG NAME PAGE 7/20/99 **C-17532 30ROSEDALE 2 of 2 SUBJECT AWARD OF CONTRACT TO CONATSER CONSTRUCTION, INC. FOR MAIN 390 DRAINAGE AREA SANITARY SEWER SYSTEM REHABILITATION AND IMPROVEMENTS (GROUP 6, CONTRACT 1) PART 8, UNITS 1 AND 4 Since Conatser Construction, Inc. is the low bidder on Units 1 and 4, construction of the units will begin simultaneously and the contractor shall be allowed a total of 120 calendar days to complete construction of both units as stipulated in the project contract documents. In addition to the contract cost, $151,000.00 (Unit 1: $61°,000.00 and Unit 4: $90,000.00) is required for inspection and survey and $65,000.00 (Unit 1: $26,000.00 and Unit 4: $39,000.00) is required for project contingencies. Conatser Construction, Inc. is in compliance with the City's M/WBE Ordinance by committing to 9% M/WBE participation on Unit 1 and 10% M/WBE participation on Unit 4 and documenting good faith effort on both units. Conatser Construction, Inc. identified several subcontracting and supplier opportunities. However, the M/WBE's contacted in the identified areas did not respond or did not submit the lowest bids. The. City's goal on this project is 19% for Unit 1 and 24% for Unit 4. FISCAL INFORMATION/CERTIFICATION: The Finance Director certifies that funds are available in the current capital budget, as appropriated, of the Commercial Paper -Sewer Fund. MG:k Submitted for City Manager's Office by: Mike Groomer 6140 FUND ACCOUNT CENTER AMOUNT CITY SECRETARY (to) APPROVED. CITY COUNCIL JUL 20 1999 ,) lJ City Secretary of the City of Fort Worth, Texas Originating Department Head: A. Douglas Rademaker 6157 (from) PS46 541200 070460410280 $2,148,963.00 Additional Information Contact: A. Douglas Rademaker 6157