The URL can be used to link to this page

Home My WebLink About065345 - General - Contract - Kirby-Smith Machinery, Inc.CSC No. 65345 FORT WORTH CITY OF FORT WORTH COOPERATIVE PURCHASE AGREEMENT This Cooperative Purchase Agreement ("Agreement") is entered into by and between Kirby -Smith Machinery, Inc., an authorized dealer of Komatsu America Corp., ("Vendor") and the City of Fort Worth ("City"), a Texas home rule municipality. The Cooperative Purchase Agreement includes the following documents which shall be construed in the order of precedence in which they are listed: 1. This Cooperative Purchase Agreement; OFFICIAL RECORD 2. Exhibit A — Discount Pricing; CITY SECRETARY 3. Exhibit B — Cooperative Agency Contract (Sourcewell 11723-KOM); and FT. WORTH, Tx 4. Exhibit C — Conflict of Interest Questionnaire Exhibits A, B, and C, which are attached hereto and incorporated herein, are made a part of this Agreement for all purposes. In the event of any conflict between the terms and conditions of Exhibits A, B, or C and the terms and conditions set forth in the body of this Agreement, the terms and conditions of this Agreement control. City shall pay Vendor in accordance with the fee schedule in Exhibit A, including any future quotes, and in accordance with the provisions of this Agreement. Total annual payment made under this non-exclusive Agreement may be an amount up to Forty -One Million Dollars and Zero Cents ($41,000,000.00). The Vendor acknowledges that this is a non-exclusive agreement and there is no guarantee of any specific amount of purchase. Further, Vendor recognizes that the amount stated above is the total amount of funds available, collectively, for any Vendor that enters into an agreement with the City under the relevant M&C or cooperative agreement and that once the full amount has been exhausted, whether individually or collectively, funds have therefore been exhausted under this Agreement as well. Vendor shall not provide any additional items or services or bill for expenses incurred for City not specified by this Agreement unless City requests and approves in writing the additional costs for such services. City shall not be liable for any additional expenses of Vendor not specified by this Agreement unless City first approves such expenses in writing. The Parties will engage in multiple transactions to purchase off -road vehicles and/or other motorized equipment. For each purchase made pursuant to this Agreement, Vendor must supply a quote for the subject vehicles, and the quote must conform with the then -current pricing under the underlying cooperative agreement. If the City accepts the quote and places an order for the vehicles/equipment, that quote shall be considered as an addendum to this agreement but is not required to be filed in the City records. The Parties will maintain all quotes for the 3-year Audit period included herein. The term of this Agreement is effective beginning on the date signed by the Assistant City Manager below ("Effective Date") and shall expire no later than May 12, 2027 ("Expiration Date"), unless terminated earlier in accordance with this Agreement.. Vendor agrees that City shall, until the expiration of three (3) years after final payment under this Agreement, or the final conclusion of any audit commenced during the said three years, have access to and the right to examine at reasonable times any directly pertinent books, documents, papers and records, including, but not limited to, all electronic records, of Vendor involving transactions relating to this Agreement at no additional cost to City. Vendor agrees that City shall have access during normal working hours to all necessary Vendor facilities and shall be provided adequate and appropriate workspace in order to conduct audits in compliance with the provisions of this section. City shall give Vendor reasonable advance notice of intended audits. Notices required pursuant to the provisions of this Agreement shall be conclusively determined to have been delivered when (1) hand -delivered to the other party, its agents, employees, servants or representatives or (2) received by the other party by United States Mail, registered, return receipt requested, addressed as follows: To CITY: To VENDOR: City of Fort Worth Kirby -Smith Machinery, Inc. Attn: Valerie Washington, Assistant City Manager James McDonnell 100 Fort Worth Trail 1450 NE Loop 820, Fort Worth, TX 76102 Fort Worth, TX, 76106 With copy to Fort Worth City Attorney's Office at Facsimile: N/A same address City is a government entity under the laws of the State of Texas and all documents held or maintained by City are subject to disclosure under the Texas Public Information Act. To the extent the Agreement requires that City maintain records in violation of the Act, City hereby objects to such provisions and such provisions are hereby deleted from the Agreement and shall have no force or effect. In the event there is a request for information marked Confidential or Proprietary, City shall promptly notify Vendor. It will be the responsibility of Vendor to submit reasons objecting to disclosure. A determination on whether such reasons are sufficient will not be decided by City, but by the Office of the Attorney General of the State of Texas or by a court of competent jurisdiction. The Agreement and the rights and obligations of the parties hereto shall be governed by, and construed in accordance with the laws of the United States and state of Texas, exclusive of conflicts of laws provisions. Venue for any suit brought under the Agreement shall be in a court of competent jurisdiction in Tarrant County, Texas. To the extent the Agreement is required to be governed by any state law other than Texas or venue in Tarrant County, City objects to such terms and any such terms are hereby deleted from the Agreement and shall have no force or effect. Nothing herein constitutes a waiver of City's sovereign immunity. To the extent the Agreement requires City to waive its rights or immunities as a government entity; such provisions are hereby deleted and shall have no force or effect. To the extent the Agreement, in any way, limits the liability of Vendor or requires City to indemnify or hold Vendor or any third party harmless from damages of any kind or character, City objects to these terms and any such terms are hereby deleted from the Agreement and shall have no force or effect. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that in accordance with Chapter 2271 of the Texas Government Code, the City is prohibited from entering into a contract with a company for goods or services unless the contract contains a written verification from the company that it: (1) does not boycott Israel; and (2) will not boycott Israel during the term of the contract. The terms "boycott Israel" and "company" has the meanings ascribed to those terms in Chapter 2271 of the Texas Government Code. By signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not boycott Israel; and (2) will not boycott Israel during the term of the Agreement. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that in accordance with Chapter 2276 of the Texas Government Code, the City is prohibited from entering into a contract for goods or services that has a value of $100,000 or more that is to be paid wholly or partly from public funds of the City with a company with 10 or more full-time employees unless the contract contains a written verification from the Vendor that it: (1) does not boycott energy companies; and (2) will not boycott energy companies during the term of this Agreement. To the extent that Chapter 2276 of the Government Code is applicable to this Agreement, by signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not boycott energy companies; and (2) will not boycott energy companies during the term of this Agreement. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that except as otherwise provided by Chapter 2274 of the Texas Government Code, the City is prohibited from entering into a contract for goods or services that has a value of $100,000 or more that is to be paid wholly or partly from public funds of the City with a company with 10 or more full-time employees unless the contract contains a written verification from the Vendor that it: (1) does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association; and (2) will not discriminate during the term of the contract against a firearm entity or firearm trade association. To the extent that Chapter 2274 of the Government Code is applicable to this Agreement, by signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association; and (2) will not discriminate against a firearm entity or firearm trade association during the term of this Agreement. The undersigned represents and warrants that he or she has the power and authority to execute this Agreement and bind the respective Vendor. CITY OF FORT WORTH: VaA, W By: Valerie Washington (Jun 12, 2026 09:32:25 CDT) Name: Valerie Washington Title: Assistant City Manager Date: 06/12/2026 APPROVAL RECOMMENDED: 4k- By: Reginald Zeno (Jun 12, 2026 09:30:44 CDT) Name: Reginald Zeno Title: Chief Financial Officer/Director ATTEST: aFoer cp ea° c9°o fig' °env �acnyaBxP`'aa By: Name: Jannette Goodall Title: City Secretary VENDOR: Kirby -Smith Machinery, Inc. By: Name: James 1- Title: Governmental Territory Manager Date: 6/3/2026 CONTRACT COMPLIANCE MANAGER: By signing I acknowledge that I am the person responsible for the monitoring and administration of this contract, including ensuring all performance and reporting requirements. By: Name: Christopher Ha Title: Senior Buyer APPROVED AS TO FORM AND LEGALITY: By: Name: Amama Muhammad Title: Assistant City Attorney CONTRACT AUTHORIZATION. M&C: 26-0393 Date: May 12, 2026 1295 Form: 2026-1410888 OFFICIAL RECORD CITY SECRETARY FT. WORTH, TX EXHIBIT A 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Air Compressors (Truck or Trailer Mounted), Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Total: I15% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Sullair List Price Page 21 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Articulated Trucks, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Total: 28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 22 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Compactors, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Total: 8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 23 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Cutters, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Total: 10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Husqvarna List Price Page 24 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 5 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Distributors, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 25 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Distributors, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Shoulder Master List Price Page 26 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 6 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Emulsion Tanks, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 27 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 7 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Pavers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 28 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Asphalt Pavers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Shoulder Master List Price Page 29 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 8 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Backhoe/Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 30 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 9 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Chip Spreaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 31 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY U Discount (%) off catalog/price list for Cold Planers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 32 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 1 Discount (%) off catalog/price list for Conveyors, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 33 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 2 Discount (%) off catalog/price list for Curb and Gutter Machines, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 34 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 3 Discount (%) off catalog/price list for Forklifts, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: 15% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". JLG List Price Page 35 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 4 Discount (%) off catalog/price list for Generator Equipment and Electrical Systems, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Multiquip List Price Page 36 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 5 Discount (%) off catalog/price list for Hydraulic Hammers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". NPK List Price Page 37 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 6 Discount (%) off catalog/price list for Integrated Tool Carriers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I2% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Terramac List Price Page 38 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 7 Discount (%) off catalog/price list for Jack Hammers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Multiquip List Price Page 39 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 8 Discount (%) off catalog/price list for Knuckle Boom Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 40 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 1 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 9 Discount (%) off catalog/price list for Material Handling Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I15% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". JLG List Price Page 41 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY U Discount (%) off catalog/price list for Melter Crack Sealers (Truck or Trailer Mounted), Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 42 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Mini Excavators, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Takeuchi List Price Page 43 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Mini Excavators. Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 13% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 44 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 2 Discount (%) off catalog/price list for Motor Graders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 45 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 3 Discount (%) off catalog/price list for Multi Terrain Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I2% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Terramac List Price Page 46 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 4 Discount (%) off catalog/price list for Paving Breakers and Milling Machines, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 47 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 5 Discount (%) off catalog/price list for Pipelaying Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 48 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 6 Discount (%) off catalog/price list for Pneumatic Compactors and Rollers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 49 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 7 Discount (%) off catalog/price list for Pothole Patchers (Trailer or Truck Mounted), Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 50 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 8 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Road Broom Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Global Sweepers List Price Page 51 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Road Broom Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Broce Brooms List Price Page 52 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 2 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 9 Discount (%) off catalog/price list for Road Reclaiming Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 53 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY U Discount (%) off catalog/price list for Scrapers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 54 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 1 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Skid Steer Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Takeuchi List Price Page 55 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Skid Steer Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Hexagon List Price Page 56 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 2 Discount (%) off catalog/price list for Soil Stabilizing Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 57 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 3 Discount (%) off catalog/price list for Telescopic Handlers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I15% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". JLG List Price Page 58 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 4 Discount (%) off catalog/price list for Track Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Takeuchi List Price Page 59 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 5 Discount (%) off catalog/price list for Track and Wheel Material Handlers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 60 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 6 Discount (%) off catalog/price list for Track -Type Tractors and Dozers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 61 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 7 Discount (%) off catalog/price list for Tracked Excavators, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 62 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 8 Discount (%) off catalog/price list for Trommel Screen Equipment and Compost Turners, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 63 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 9 Discount (%) off catalog/price list for Truck Mounted Excavators, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I2% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Gradall List Price Page 64 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY U Discount (%) off catalog/price list for All Types of Truck Mounted Aerial Lifts, Accessories and Attachments (telescopic, cable handler, digger/hydraulic derrick, and related aerial lifts). Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: 15% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". JLG List Price Page 65 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 1 Discount (%) off catalog/price list for Utility Vehicles, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 66 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY 2 Discount (%) off catalog/price list for Vibratory Soil Compactors and Rollers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Leeboy List Price Page 67 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 3 Discount (%) off catalog/price list for Waste Handling Wheel Loaders and Landfill Compactors, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 68 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 4 Discount (%) off catalog/price list for Wheel Dozers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 69 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 5 Discount (%) off catalog/price list for Wheel Excavators, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I2% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Gradall List Price Page 70 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 6 Discount (%) off catalog/price list for Wheel Loaders, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I28% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Komatsu List Price Page 71 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY 7 Discount (%) off catalog/price list for Heavy Duty Paint Striping Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price ►ist(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 72 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 4 8 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for All Other Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I8% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Bomag List Price Page 73 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Alternate 1 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for All Other Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Strickland List Price Alternate 2 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for All Other Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Ledwell List Price Alternate 3 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for All Other Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 8% Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NOTE: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Premier Water Tanks List Price Alternate 4 Section I: New Construction, Road, Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for All Other Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors. Accessories and Attachments. Total: 10% Page 74 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 4 9 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Thompson Pumps List Price Section I: New Construction, Road. Bridge and Repair Equipment -PURCHASE ONLY Discount (%) off catalog/price list for Repair Parts on All Types of Construction, Road, Bridge, and Other Equipment. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I0% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 75 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 0 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Parts Price List Section II: Construction, Road, Bridge, and Repair Equipment -RENTAL ONLY (Rental Rate Sheet must be submitted with Proposal or Proposal will not be considered). Discount (%) off catalog/price list for RENTAL of All Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: 10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 76 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 1 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Rental List Section III: Construction, Road. Bridge, and Repair Equipment (Pre-Owned/Reconditioned/Retired Rental)- PURCHASE ONLY Discount (%) off catalog/price list for All Types of Pre-Owned/Reconditioned/Retired Rental Construction, Road, Bridge, Other Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: 10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 77 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 2 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Used Price List Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Broom Street Sweepers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 78 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 3 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Global Sweepers List Price Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Air Street Sweepers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization agreements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 79 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 4 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Global Sweepers List Price Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Regenerative Air Street Sweepers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 80 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 5 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Global Sweepers List Price Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Waterless Street Sweepers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 81 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 6 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Global sweepers List Price Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Alternative Fuel Street Sweepers, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I5% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 82 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 7 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Global Sweepers List Price Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for All Types of Mounted Sand and Salt Spreading Equipment, Accessories and Attachments (Pick -Up, Utility, Heavy -Duty, or Tailgate). Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 83 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 8 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Pre -Wetting Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accented as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 84 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 5 9 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Snowplow Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accented as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 85 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 0 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Deicing Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accented as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 86 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 1 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section IV: Street Sweepers. Sand/Salt Spreadina. Snowplows and Deicina Road and Bridae Equipment- PURCHASE ONLY Discount (%) off catalog/price list for All Other Types of Street Sweeper, Sand/Salt Spreading, Snowplows and Deicing Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalogs)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalogs)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accented as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 87 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 2 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section IV: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment- PURCHASE ONLY Discount (%) off catalog/price list for Repair Parts on All Types of Street Sweepers, Sand/Salt Spreading, Snowplows, Deicing, and Other Related Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I0% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 88 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 3 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Parts Price List Section V: Street Sweepers, Sand/Salt Spreading. Snowplows and Deicing Road and Bridge Equipment -RENTAL ONLY (Rental Rate Sheet must be submitted with Proposal or Proposal will not be considered.) Discount (%) off catalog/price list for RENTAL of All Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 89 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 4 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Rental List Section VI: Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment (Pre-Owned/Reconditioned/Retired Rental) -PURCHASE ONLY Discount (%) off catalog/price list for All Types of Pre-Owned/Reconditioned/Retired Rental Street Sweepers, Sand/Salt Spreading, Snowplows and Deicing Road and Bridge Equipment, Accessories and Attachments. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I10% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accepted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 90 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 6 5 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Used Price List Section VII: Soil and Road Chemical Polymers Discount (%) off catalog/price list for Chemical Base Polymers and Stabilizer for Soil and Road (used for soil/road to provide a chemical bond joining particles into formation). Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. No Bid Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be accented as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 91 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Section Vill: Installation and Repair Service Discount (%) off catalog/price list for Maintenance Services (monthly, quarterly, and/or yearly) of Construction, Road and Bridge, Street Sweepers, Sand/Salt Spreading, Snowplows, Deicing and Other Equipment. Catalog/Price list MUST be included or proposal will not be considered. Asphalt Distributors, Accessories and Attachments. Total: I0% Item Notes: PROPOSAL NOTE 1: Vendors shall submit catalog(s)/price list(s) with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/price list(s) with the Proposal in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. PROPOSAL NOTE 2: A Vendor proposing shall be approved and authorized by the manufacturer to sell, install, and service the brand(s) of product(s) proposed. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer for each product line proposed. The requirement to provide an approval letter from the manufacturer applies to both seller and installers. Manufacturers responding directly to this Proposal Invitation, in lieu of an authorization letter, shall submit a written explanation that the company is the manufacturer of the product line(s) proposed. Dealer authorization aareements will not be acceDted as a substitute for the manufacturer authorization letter. The manufacturer authorization letters must include the following: 1. Composed on manufacturer letterhead (an email message is not a substitute for the letter), 2. Addressed to "The Local Government Purchasing Cooperative", 3. Dated within the current calendar year, 4. List the regions in Texas and states that Vendor is authorized to sell, install, and service product(s) proposed, and 5. Name, Title, and Signature of Authorized Official from Manufacturer. PROPOSAL NOTE 3: "Pre-Owned/Reconditioned/Retired Rental" shall be defined as equipment having been checked and inspected by a manufacturer -authorized dealer prior to sale and shall be no older than sixty (60) months as of the date of delivery. Proposers responding to this Proposal Invitation for "Pre-Owned/Reconditioned/Retired Rental" equipment must also be approved by the manufacturer to sell pre-owned/reconditioned/retired rental equipment for the brand submitted and must submit an approval letter from each manufacturer with the Proposal. Manufacturer authorization letters must include the regions in which equipment can be sold. Equipment listed as "Pre- Owned/Reconditioned/Retired Rental" shall be in good and working condition and shall include a minimum warranty of one -hundred eighty (180) days against any defect from workmanship and parts and shall cover equipment repairs and/or component replacement. Total equipment usage hours as displayed on the service meter will have a maximum of one thousand (1,000) hours per year of age and a minimum of seventy-five percent (75%) of wear remaining for tires, track, and/or ground engagement tools. Vendors proposing multiple manufacturer product lines and/or catalog/price list per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/price list proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/price list listed Page 92 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 Item Attributes 1. State Name of Manufacturer Catalog or Product Price list Proposed with Discount Percentage NO E: Do not reference SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T Kirby -Smith Parts Price List 6 Section VIII: Installation and Repair Service 7 Hourly Labor Rate for Installation/Repair Service on All Types of Construction, Road, Bridge and Other Equipment- Not to Exceed hourly labor rate for Installation/Repair Service of Equipment and Products. Quantity: 1 UOM: Hourly Labor Rate Price: $195.00 Total: $195.00 6 Section VIII: Installation and Repair Service 8 Hourly Labor Rate for Installation/Repair Service on All Types of Street Sweepers, Sand/Salt Spreading, Snowplows, Deicing and Other Equipment- Not to Exceed hourly labor rate for Installation/Repair Service of Equipment and Products. Quantity: 1 UOM: Hourly Labor Rate Price: $195.00 Total: $195.00 Response Total: $390.00 Page 93 of 93 pages Vendor: Kirby -Smith Machinery Inc 788-25 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Exhibit B 011723- KOM Sourcewell Pa' Solicitation Number: RFP # 011723 CONTRACT This Contract is between Sourcewell, 202 12th Street Northeast, P.O. Box 219, Staples, MN 56479 (Sourcewell) and Komatsu America Corp., 8770 West Bryn Mawr Avenue, Suite 100, Chicago, IL 60631 (Supplier). Sourcewell is a State of Minnesota local government unit and service cooperative created under the laws of the State of Minnesota (Minnesota Statutes Section 123A.21) that offers cooperative procurement solutions to government entities. Participation is open to eligible federal, state/province, and municipal governmental entities, higher education, K-12 education, nonprofit, tribal government, and other public entities located in the United States and Canada. Sourcewell issued a public solicitation for Heavy Construction Equipment with Related Attachments and Technology from which Supplier was awarded a contract. Supplier desires to contract with Sourcewell to provide equipment, products, or services to Sourcewell and the entities that access Sourcewell's cooperative purchasing contracts (Participating Entities). 1. TERM OF CONTRACT A. EFFECTIVE DATE. This Contract is effective upon the date of the final signature below. B. EXPIRATION DATE AND EXTENSION. This Contract expires April 14, 2027, unless it is cancelled sooner pursuant to Article 22. This Contract may be extended one additional year upon the request of Sourcewell and written agreement by Supplier. C. SURVIVAL OF TERMS. Notwithstanding any expiration or termination of this Contract, all payment obligations incurred prior to expiration or termination will survive, as will the following: Articles 11 through 14 survive the expiration or cancellation of this Contract. All other rights will cease upon expiration or termination of this Contract. 2. EQUIPMENT, PRODUCTS, OR SERVICES A. EQUIPMENT, PRODUCTS, OR SERVICES. Supplier will provide the Equipment, Products, or Services as stated in its Proposal submitted under the Solicitation Number listed above. Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM Supplier's Equipment, Products, or Services Proposal (Proposal) is attached and incorporated into this Contract. All Equipment and Products provided under this Contract must be new and the current model. Supplier may offer close-out or refurbished Equipment or Products if they are clearly indicated in Supplier's product and pricing list. Unless agreed to by the Participating Entities in advance, Equipment or Products must be delivered as operational to the Participating Entity's site. This Contract offers an indefinite quantity of sales, and while substantial volume is anticipated, sales and sales volume are not guaranteed. B. WARRANTY. Supplier warrants that all Equipment, Products, and Services furnished are free from liens and encumbrances, and are free from defects in design, materials, and workmanship. In addition, Supplier warrants the Equipment, Products, and Services are suitable for and will perform in accordance with the ordinary use for which they are intended. Supplier's dealers and distributors must agree to assist the Participating Entity in reaching a resolution in any dispute over warranty terms with the manufacturer. Any manufacturer's warranty that extends beyond the expiration of the Supplier's warranty will be passed on to the Participating Entity. C. DEALERS, DISTRIBUTORS, AND/OR RESELLERS. Upon Contract execution and throughout the Contract term, Supplier must provide to Sourcewell a current means to validate or authenticate Supplier's authorized dealers, distributors, or resellers relative to the Equipment, Products, and Services offered under this Contract, which will be incorporated into this Contract by reference. It is the Supplier's responsibility to ensure Sourcewell receives the most current information. 3. PRICING All Equipment, Products, or Services under this Contract will be priced at or below the price stated in Supplier's Proposal. When providing pricing quotes to Participating Entities, all pricing quoted must reflect a Participating Entity's total cost of acquisition. This means that the quoted cost is for delivered Equipment, Products, and Services that are operational for their intended purpose, and includes all costs to the Participating Entity's requested delivery location. Regardless of the payment method chosen by the Participating Entity, the total cost associated with any purchase option of the Equipment, Products, or Services must always be disclosed in the pricing quote to the applicable Participating Entity at the time of purchase. A. SHIPPING AND SHIPPING COSTS. All delivered Equipment and Products must be properly packaged. Damaged Equipment and Products may be rejected. If the damage is not readily apparent at the time of delivery, Supplier must permit the Equipment and Products to be Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM returned within a reasonable time at no cost to Sourcewell or its Participating Entities. Participating Entities reserve the right to inspect the Equipment and Products at a reasonable time after delivery where circumstances or conditions prevent effective inspection of the Equipment and Products at the time of delivery. In the event of the delivery of nonconforming Equipment and Products, the Participating Entity will notify the Supplier as soon as possible and the Supplier will replace nonconforming Equipment and Products with conforming Equipment and Products that are acceptable to the Participating Entity. Supplier must arrange for and pay for the return shipment on Equipment and Products that arrive in a defective or inoperable condition. Sourcewell may declare the Supplier in breach of this Contract if the Supplier intentionally delivers substandard or inferior Equipment or Products. B. SALES TAX. Each Participating Entity is responsible for supplying the Supplier with valid tax - exemption certification(s). When ordering, a Participating Entity must indicate if it is a tax- exempt entity. C. HOT LIST PRICING. At anytime during this Contract, Supplier may offer a specific selection of Equipment, Products, or Services at discounts greater than those listed in the Contract. When Supplier determines it will offer Hot List Pricing, it must be submitted electronically to Sourcewell in a line -item format. Equipment, Products, or Services may be added or removed from the Hot List at anytime through a Sourcewell Price and Product Change Form as defined in Article 4 below. Hot List program and pricing may also be used to discount and liquidate close-out and discontinued Equipment and Products as long as those close-out and discontinued items are clearly identified as such. Current ordering process and administrative fees apply. Hot List Pricing must be published and made available to all Participating Entities. 4. PRODUCT AND PRICING CHANGE REQUESTS Supplier may request Equipment, Product, or Service changes, additions, or deletions at any time. All requests must be made in writing by submitting a signed Sourcewell Price and Product Change Request Form to the assigned Sourcewell Supplier Development Administrator. This approved form is available from the assigned Sourcewell Supplier Development Administrator. At a minimum, the request must: • Identify the applicable Sourcewell contract number; • Clearly specify the requested change; • Provide sufficient detail to justify the requested change; Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM • Individually list all Equipment, Products, or Services affected by the requested change, along with the requested change (e.g., addition, deletion, price change); and • Include a complete restatement of pricing documentation in Microsoft Excel with the effective date of the modified pricing, or product addition or deletion. The new pricing restatement must include all Equipment, Products, and Services offered, even for those items where pricing remains unchanged. A fully executed Sourcewell Price and Product Request Form will become an amendment to this Contract and will be incorporated by reference. 5. PARTICIPATION, CONTRACT ACCESS, AND PARTICIPATING ENTITY REQUIREMENTS A. PARTICIPATION. Sourcewell's cooperative contracts are available and open to public and nonprofit entities across the United States and Canada; such as federal, state/province, municipal, K-12 and higher education, tribal government, and other public entities. The benefits of this Contract should be available to all Participating Entities that can legally access the Equipment, Products, or Services under this Contract. A Participating Entity's authority to access this Contract is determined through its cooperative purchasing, interlocal, or joint powers laws. Any entity accessing benefits of this Contract will be considered a Service Member of Sourcewell during such time of access. Supplier understands that a Participating Entity's use of this Contract is at the Participating Entity's sole convenience and Participating Entities reserve the right to obtain like Equipment, Products, or Services from any other source. Supplier is responsible for familiarizing its sales and service forces with Sourcewell contract use eligibility requirements and documentation and will encourage potential participating entities to join Sourcewell. Sourcewell reserves the right to add and remove Participating Entities to its roster during the term of this Contract. B. PUBLIC FACILITIES. Supplier's employees maybe required to perform work at government - owned facilities, including schools. Supplier's employees and agents must conduct themselves in a professional manner while on the premises, and in accordance with Participating Entity policies and procedures, and all applicable laws. 6. PARTICIPATING ENTITY USE AND PURCHASING A. ORDERS AND PAYMENT. To access the contracted Equipment, Products, or Services under this Contract, a Participating Entity must clearly indicate to Supplier that it intends to access this Contract; however, order flow and procedure will be developed jointly between Sourcewell and Supplier. Typically, a Participating Entity will issue an order directly to Supplier or its authorized subsidiary, distributor, dealer, or reseller. If a Participating Entity issues a purchase order, it may use its own forms, but the purchase order should clearly note the applicable Sourcewell Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM contract number. All Participating Entity orders under this Contract must be issued prior to expiration or cancellation of this Contract; however, Supplier performance, Participating Entity payment obligations, and any applicable warranty periods or other Supplier or Participating Entity obligations may extend beyond the term of this Contract. Supplier's acceptable forms of payment are included in its attached Proposal. Participating Entities will be solely responsible for payment and Sourcewell will have no liability for any unpaid invoice of any Participating Entity. B. ADDITIONAL TERMS AND CONDITIONS/PARTICIPATING ADDENDUM. Additional terms and conditions to a purchase order, or other required transaction documentation, may be negotiated between a Participating Entity and Supplier, such as job or industry -specific requirements, legal requirements (e.g., affirmative action or immigration status requirements), or specific local policy requirements. Some Participating Entities may require the use of a Participating Addendum, the terms of which will be negotiated directly between the Participating Entity and the Supplier or its authorized dealers, distributors, or resellers, as applicable. Any negotiated additional terms and conditions must never be less favorable to the Participating Entity than what is contained in this Contract. C. SPECIALIZED SERVICE REQUIREMENTS. In the event that the Participating Entity requires service or specialized performance requirements not addressed in this Contract (such as e- commerce specifications, specialized delivery requirements, or other specifications and requirements), the Participating Entity and the Supplier may enter into a separate, standalone agreement, apart from this Contract. Sourcewell, including its agents and employees, will not be made a party to a claim for breach of such agreement. D. TERMINATION OF ORDERS. Participating Entities may terminate an order, in whole or in part, immediately upon notice to Supplier in the event of any of the following events: 1. The Participating Entity fails to receive funding or appropriation from its governing body at levels sufficient to pay for the equipment, products, or services to be purchased; or 2. Federal, state, or provincial laws or regulations prohibit the purchase or change the Participating Entity's requirements. E. GOVERNING LAW AND VENUE. The governing law and venue for any action related to a Participating Entity's order will be determined by the Participating Entity making the purchase. 7. CUSTOMER SERVICE A. PRIMARY ACCOUNT REPRESENTATIVE. Supplier will assign an Account Representative to Sourcewell for this Contract and must provide prompt notice to Sourcewell if that person is changed. The Account Representative will be responsible for: Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM • Maintenance and management of this Contract; • Timely response to all Sourcewell and Participating Entity inquiries; and • Business reviews to Sourcewell and Participating Entities, if applicable. B. BUSINESS REVIEWS. Supplier must perform a minimum of one business review with Sourcewell per contract year. The business review will cover sales to Participating Entities, pricing and contract terms, administrative fees, sales data reports, performance issues, supply issues, customer issues, and any other necessary information. 8. REPORT ON CONTRACT SALES ACTIVITY AND ADMINISTRATIVE FEE PAYMENT A. CONTRACT SALES ACTIVITY REPORT. Each calendar quarter, Supplier must provide a contract sales activity report (Report) to the Sourcewell Supplier Development Administrator assigned to this Contract. Reports are due no later than 45 days after the end of each calendar quarter. A Report must be provided regardless of the number or amount of sales during that quarter (i.e., if there are no sales, Supplier must submit a report indicating no sales were made). The Report must contain the following fields: • Participating Entity Name (e.g., City of Staples Highway Department); • Participating Entity Physical Street Address; • Participating Entity City; • Participating Entity State/Province; • Participating Entity Zip/Postal Code; • Participating Entity Contact Name; • Participating Entity Contact Email Address; • Participating Entity Contact Telephone Number; • Sourcewell Assigned Entity/Participating Entity Number; • Item Purchased Description; • Item Purchased Price; • Sourcewell Administrative Fee Applied; and • Date Purchase was invoiced/sale was recognized as revenue by Supplier. B. ADMINISTRATIVE FEE. In consideration for the support and services provided by Sourcewell, the Supplier will pay an administrative fee to Sourcewell on all Equipment, Products, and Services provided to Participating Entities. The Administrative Fee must be included in, and not added to, the pricing. Supplier may not charge Participating Entities more than the contracted price to offset the Administrative Fee. The Supplier will submit payment to Sourcewell for the percentage of administrative fee stated in the Proposal multiplied by the total sales of all Equipment, Products, and Services purchased Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM by Participating Entities under this Contract during each calendar quarter. Payments should note the Supplier's name and Sourcewell-assigned contract number in the memo; and must be mailed to the address above "Attn: Accounts Receivable" or remitted electronically to Sourcewell's banking institution per Sourcewell's Finance department instructions. Payments must be received no later than 45 calendar days after the end of each calendar quarter. Supplier agrees to cooperate with Sourcewell in auditing transactions under this Contract to ensure that the administrative fee is paid on all items purchased under this Contract. In the event the Supplier is delinquent in any undisputed administrative fees, Sourcewell reserves the right to cancel this Contract and reject any proposal submitted by the Supplier in any subsequent solicitation. In the event this Contract is cancelled by either party prior to the Contract's expiration date, the administrative fee payment will be due no more than 30 days from the cancellation date. 9. AUTHORIZED REPRESENTATIVE Sourcewell's Authorized Representative is its Chief Procurement Officer. Supplier's Authorized Representative is the person named in the Supplier's Proposal. If Supplier's Authorized Representative changes at any time during this Contract, Supplier must promptly notify Sourcewell in writing. 10. AUDIT, ASSIGNMENT, AMENDMENTS, WAIVER, AND CONTRACT COMPLETE A. AUDIT. Pursuant to Minnesota Statutes Section 16C.05, subdivision 5, the books, records, documents, and accounting procedures and practices relevant to this Contract are subject to examination by Sourcewell or the Minnesota State Auditor for a minimum of six years from the end of this Contract. This clause extends to Participating Entities as it relates to business conducted by that Participating Entity under this Contract. B. ASSIGNMENT. Neither party may assign or otherwise transfer its rights or obligations under this Contract without the prior written consent of the other party and a fully executed assignment agreement. Such consent will not be unreasonably withheld. Any prohibited assignment will be invalid. C. AMENDMENTS. Any amendment to this Contract must be in writing and will not be effective until it has been duly executed by the parties. D. WAIVER. Failure by either party to take action or assert any right under this Contract will not be deemed a waiver of such right in the event of the continuation or repetition of the circumstances giving rise to such right. Any such waiver must be in writing and signed by the parties. Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM E. CONTRACT COMPLETE. This Contract represents the complete agreement between the parties. No other understanding regarding this Contract, whether written or oral, may be used to bind either party. For any conflict between the attached Proposal and the terms set out in Articles 1-22 of this Contract, the terms of Articles 1-22 will govern. F. RELATIONSHIP OF THE PARTIES. The relationship of the parties is one of independent contractors, each free to exercise judgment and discretion with regard to the conduct of their respective businesses. This Contract does not create a partnership, joint venture, or any other relationship such as master -servant, or principal -agent. 11. INDEMNITY AND HOLD HARMLESS Supplier must indemnify, defend, save, and hold Sourcewell and its Participating Entities, including their agents and employees, harmless from any claims or causes of action, including attorneys' fees incurred by Sourcewell or its Participating Entities, arising out of any act or omission in the performance of this Contract by the Supplier or its agents or employees; this indemnification includes injury or death to person(s) or property alleged to have been caused by some defect in the Equipment, Products, or Services under this Contract to the extent the Equipment, Product, or Service has been used according to its specifications. Sourcewell's responsibility will be governed by the State of Minnesota's Tort Liability Act (Minnesota Statutes Chapter 466) and other applicable law. 12. GOVERNMENT DATA PRACTICES Supplier and Sourcewell must comply with the Minnesota Government Data Practices Act, Minnesota Statutes Chapter 13, as it applies to all data provided by or provided to Sourcewell under this Contract and as it applies to all data created, collected, received, maintained, or disseminated by the Supplier under this Contract. 13. INTELLECTUAL PROPERTY, PUBLICITY, MARKETING, AND ENDORSEMENT A. INTELLECTUAL PROPERTY 1. Grant of License. During the term of this Contract: a. Sourcewell grants to Supplier a royalty -free, worldwide, non-exclusive right and license to use the trademark(s) provided to Supplier by Sourcewell in advertising and promotional materials for the purpose of marketing Sourcewell's relationship with Supplier. b. Supplier grants to Sourcewell a royalty -free, worldwide, non-exclusive right and license to use Supplier's trademarks in advertising and promotional materials for the purpose of marketing Supplier's relationship with Sourcewell. 2. Limited Right of Sublicense. The right and license granted herein includes a limited right of each party to grant sublicenses to their respective subsidiaries, distributors, dealers, Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM resellers, marketing representatives, and agents (collectively "Permitted Sublicensees") in advertising and promotional materials for the purpose of marketing the Parties' relationship to Participating Entities. Any sublicense granted will be subject to the terms and conditions of this Article. Each party will be responsible for any breach of this Article by any of their respective sublicensees. 3. Use; Quality Control. a. Neither party may alter the other party's trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party's trademarks only in good faith and in a dignified manner consistent with such party's use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated. 4. Termination. Upon the termination of this Contract for any reason, each party, including Permitted Sublicensees, will have 30 days to remove all Trademarks from signage, websites, and the like bearing the other party's name or logo (excepting Sourcewell's pre-printed catalog of suppliers which may be used until the next printing). Supplier must return all marketing and promotional materials, including signage, provided by Sourcewell, or dispose of it according to Sourcewell's written directions. B. PUBLICITY. Any publicity regarding the subject matter of this Contract must not be released without prior written approval from the Authorized Representatives. Publicity includes notices, informational pamphlets, press releases, research, reports, signs, and similar public notices prepared by or for the Supplier individually or jointly with others, or any subcontractors, with respect to the program, publications, or services provided resulting from this Contract. C. MARKETING. Any direct advertising, marketing, or offers with Participating Entities must be approved by Sourcewell. Send all approval requests to the Sourcewell Supplier Development Administrator assigned to this Contract. D. ENDORSEMENT. The Supplier must not claim that Sourcewell endorses its Equipment, Products, or Services. 14. GOVERNING LAW, JURISDICTION, AND VENUE The substantive and procedural laws of the State of Minnesota will govern this Contract. Venue for all legal proceedings arising out of this Contract, or its breach, must be in the appropriate state court in Todd County, Minnesota or federal court in Fergus Falls, Minnesota. Rev. 3/2022 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM 15. FORCE MAJEURE Neither party to this Contract will be held responsible for delay or default caused by acts of God or other conditions that are beyond that party's reasonable control. A party defaulting under this provision must provide the other party prompt written notice of the default. 16. SEVERABILITY If any provision of this Contract is found by a court of competent jurisdiction to be illegal, unenforceable, or void then both parties will be relieved from all obligations arising from that provision. If the remainder of this Contract is capable of being performed, it will not be affected by such determination or finding and must be fully performed. 17. PERFORMANCE, DEFAULT, AND REMEDIES A. PERFORMANCE. During the term of this Contract, the parties will monitor performance and address unresolved contract issues as follows: 1. Notification. The parties must promptly notify each other of any known dispute and work in good faith to resolve such dispute within a reasonable period of time. If necessary, Sourcewell and the Supplier will jointly develop a short briefing document that describes the issue(s), relevant impact, and positions of both parties. 2. Escalation. If parties are unable to resolve the issue in a timely manner, as specified above, either Sourcewell or Supplier may escalate the resolution of the issue to a higher level of management. The Supplier will have 30 calendar days to cure an outstanding issue. 3. Performance while Dispute is Pending. Notwithstanding the existence of a dispute, the Supplier must continue without delay to carry out all of its responsibilities under the Contract that are not affected by the dispute. If the Supplier fails to continue without delay to perform its responsibilities under the Contract, in the accomplishment of all undisputed work, the Supplier will bear any additional costs incurred by Sourcewell and/or its Participating Entities as a result of such failure to proceed. B. DEFAULT AND REMEDIES. Either of the following constitutes cause to declare this Contract, or any Participating Entity order under this Contract, in default: 1. Nonperformance of contractual requirements, or 2. A material breach of any term or condition of this Contract. The party claiming default must provide written notice of the default, with 30 calendar days to cure the default. Time allowed for cure will not diminish or eliminate any liability for liquidated or other damages. If the default remains after the opportunity for cure, the non -defaulting party may: Rev. 3/2022 10 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM • Exercise any remedy provided by law or equity, or • Terminate the Contract or any portion thereof, including any orders issued against the Contract. 18. INSURANCE A. REQUIREMENTS. At its own expense, Supplier must maintain insurance policy(ies) in effect at all times during the performance of this Contract with insurance company(ies) licensed or authorized to do business in the State of Minnesota having an "AM BEST" rating of A- or better, with coverage and limits of insurance not less than the following: 1. Workers' Compensation and Employer's Liability. Workers' Compensation: As required by any applicable law or regulation. Employer's Liability Insurance: must be provided in amounts not less than listed below: Minimum limits: $500,000 each accident for bodily injury by accident $500,000 policy limit for bodily injury by disease $500,000 each employee for bodily injury by disease 2. Commercial General Liability Insurance. Supplier will maintain insurance covering its operations, with coverage on an occurrence basis, and must be subject to terms no less broad than the Insurance Services Office ("ISO") Commercial General Liability Form CG0001 (2001 or newer edition), or equivalent. At a minimum, coverage must include liability arising from premises, operations, bodily injury and property damage, independent contractors, products -completed operations including construction defect, contractual liability, blanket contractual liability, and personal injury and advertising injury. All required limits, terms and conditions of coverage must be maintained during the term of this Contract. Minimum Limits: $1,000,000 each occurrence Bodily Injury and Property Damage $1,000,000 Personal and Advertising Injury $2,000,000 aggregate for products liability -completed operations $2,000,000 general aggregate 3. Commercial Automobile Liability Insurance. During the term of this Contract, Supplier will maintain insurance covering all owned, hired, and non -owned automobiles in limits of liability not less than indicated below. The coverage must be subject to terms no less broad than ISO Business Auto Coverage Form CA 0001 (2010 edition or newer), or equivalent. Minimum Limits: $1,000,000 each accident, combined single limit Rev. 3/2022 11 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM 4. Umbrella Insurance. During the term of this Contract, Supplier will maintain umbrella coverage over Employer's Liability, Commercial General Liability, and Commercial Automobile. Minimum Limits: $2,000,000 5. Network Security and Privacy Liability Insurance. During the term of this Contract, Supplier will maintain coverage for network security and privacy liability. The coverage may be endorsed on another form of liability coverage or written on a standalone policy. The insurance must cover claims which may arise from failure of Supplier's security resulting in, but not limited to, computer attacks, unauthorized access, disclosure of not public data — including but not limited to, confidential or private information, transmission of a computer virus, or denial of service. Minimum limits: $2,000,000 per occurrence $2,000,000 annual aggregate Failure of Supplier to maintain the required insurance will constitute a material breach entitling Sourcewell to immediately terminate this Contract for default. B. CERTIFICATES OF INSURANCE. Prior to commencing under this Contract, Supplier must furnish to Sourcewell a certificate of insurance, as evidence of the insurance required under this Contract. Prior to expiration of the policy(ies), renewal certificates must be mailed to Sourcewell, 202 12th Street Northeast, P.O. Box 219, Staples, MN 56479 or sent to the Sourcewell Supplier Development Administrator assigned to this Contract. The certificates must be signed by a person authorized by the insurer(s) to bind coverage on their behalf. Failure to request certificates of insurance by Sourcewell, or failure of Supplier to provide certificates of insurance, in no way limits or relieves Supplier of its duties and responsibilities in this Contract. C. ADDITIONAL INSURED ENDORSEMENT AND PRIMARY AND NON-CONTRIBUTORY INSURANCE CLAUSE. Supplier agrees to list Sourcewell and its Participating Entities, including their officers, agents, and employees, as an additional insured under the Supplier's commercial general liability insurance policy with respect to liability arising out of activities, "operations," or "work" performed by or on behalf of Supplier, and products and completed operations of Supplier. The policy provision(s) or endorsements) must further provide that coverage is primary and not excess over or contributory with any other valid, applicable, and collectible insurance or self-insurance in force for the additional insureds. D. WAIVER OF SUBROGATION. Supplier waives and must require (by endorsement or otherwise) all its insurers to waive subrogation rights against Sourcewell and other additional insureds for losses paid under the insurance policies required by this Contract or other insurance applicable to the Supplier or its subcontractors. The waiver must apply to all Rev. 3/2022 12 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM deductibles and/or self -insured retentions applicable to the required or any other insurance maintained by the Supplier or its subcontractors. Where permitted by law, Supplier must require similar written express waivers of subrogation and insurance clauses from each of its subcontractors. E. UMBRELLA/EXCESS LIABILITY/SELF-INSURED RETENTION. The limits required by this Contract can be met by either providing a primary policy or in combination with umbrella/excess liability policy(ies), or self -insured retention. 19. COMPLIANCE A. LAWS AND REGULATIONS. All Equipment, Products, or Services provided under this Contract must comply fully with applicable federal laws and regulations, and with the laws in the states and provinces in which the Equipment, Products, or Services are sold. B. LICENSES. Supplier must maintain a valid and current status on all required federal, state/provincial, and local licenses, bonds, and permits required for the operation of the business that the Supplier conducts with Sourcewell and Participating Entities. 20. BANKRUPTCY, DEBARMENT, OR SUSPENSION CERTIFICATION Supplier certifies and warrants that it is not in bankruptcy or that it has previously disclosed in writing certain information to Sourcewell related to bankruptcy actions. If at any time during this Contract Supplier declares bankruptcy, Supplier must immediately notify Sourcewell in writing. Supplier certifies and warrants that neither it nor its principals are presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from programs operated by the State of Minnesota; the United States federal government or the Canadian government, as applicable; or any Participating Entity. Supplier certifies and warrants that neither it nor its principals have been convicted of a criminal offense related to the subject matter of this Contract. Supplier further warrants that it will provide immediate written notice to Sourcewell if this certification changes at any time. 21. PROVISIONS FOR NON -UNITED STATES FEDERAL ENTITY PROCUREMENTS UNDER UNITED STATES FEDERAL AWARDS OR OTHER AWARDS Participating Entities that use United States federal grant or FEMA funds to purchase goods or services from this Contract may be subject to additional requirements including the procurement standards of the Uniform Administrative Requirements, Cost Principles and Audit Requirements for Federal Awards, 2 C.F.R. § 200. Participating Entities may have additional requirements based on specific funding source terms or conditions. Within this Article, all references to "federal" should be interpreted to mean the United States federal government. Rev. 3/2022 13 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM The following list only applies when a Participating Entity accesses Supplier's Equipment, Products, or Services with United States federal funds. A. EQUAL EMPLOYMENT OPPORTUNITY. Except as otherwise provided under 41 C.F.R. § 60, all contracts that meet the definition of "federally assisted construction contract" in 41 C.F.R. § 60- 1.3 must include the equal opportunity clause provided under 41 C.F.R. §60-1.4(b), in accordance with Executive Order 11246, "Equal Employment Opportunity" (30 FR 12319, 12935, 3 C.F.R. §, 1964-1965 Comp., p. 339), as amended by Executive Order 11375, "Amending Executive Order 11246 Relating to Equal Employment Opportunity," and implementing regulations at 41 C.F.R. § 60, "Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor." The equal opportunity clause is incorporated herein by reference. B. DAVIS-BACON ACT, AS AMENDED (40 U.S.C. § 3141-3148). When required by federal program legislation, all prime construction contracts in excess of $2,000 awarded by non- federal entities must include a provision for compliance with the Davis -Bacon Act (40 U.S.C. § 3141-3144, and 3146-3148) as supplemented by Department of Labor regulations (29 C.F.R. § 5, "Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction"). In accordance with the statute, contractors must be required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determination made by the Secretary of Labor. In addition, contractors must be required to pay wages not less than once a week. The non-federal entity must place a copy of the current prevailing wage determination issued by the Department of Labor in each solicitation. The decision to award a contract or subcontract must be conditioned upon the acceptance of the wage determination. The non-federal entity must report all suspected or reported violations to the federal awarding agency. The contracts must also include a provision for compliance with the Copeland "Anti -Kickback" Act (40 U.S.C. § 3145), as supplemented by Department of Labor regulations (29 C.F.R. § 3, "Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States"). The Act provides that each contractor or subrecipient must be prohibited from inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. The non-federal entity must report all suspected or reported violations to the federal awarding agency. Supplier must be in compliance with all applicable Davis -Bacon Act provisions. C. CONTRACT WORK HOURS AND SAFETY STANDARDS ACT (40 U.S.C. § 3701-3708). Where applicable, all contracts awarded by the non-federal entity in excess of $100,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. §§ 3702 and 3704, as supplemented by Department of Labor regulations (29 C.F.R. § 5). Under 40 U.S.C. § 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 Rev. 3/2022 14 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM hours in the work week. The requirements of 40 U.S.C. § 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence. This provision is hereby incorporated by reference into this Contract. Supplier certifies that during the term of an award for all contracts by Sourcewell resulting from this procurement process, Supplier must comply with applicable requirements as referenced above. D. RIGHTS TO INVENTIONS MADE UNDER A CONTRACTOR AGREEMENT. If the federal award meets the definition of "funding agreement" under 37 C.F.R. § 401.2(a) and the recipient or subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the substitution of parties, assignment or performance of experimental, developmental, or research work under that "funding agreement," the recipient or subrecipient must comply with the requirements of 37 C.F.R. § 401, "Rights to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements," and any implementing regulations issued by the awarding agency. Supplier certifies that during the term of an award for all contracts by Sourcewell resulting from this procurement process, Supplier must comply with applicable requirements as referenced above. E. CLEAN AIR ACT (42 U.S.C. § 7401-7671Q.) AND THE FEDERAL WATER POLLUTION CONTROL ACT (33 U.S.C. § 1251-1387). Contracts and subgrants of amounts in excess of $150,000 require the non-federal award to agree to comply with all applicable standards, orders or regulations issued pursuant to the Clean Air Act (42 U.S.C. § 7401- 7671q) and the Federal Water Pollution Control Act as amended (33 U.S.C. § 1251- 1387). Violations must be reported to the Federal awarding agency and the Regional Office of the Environmental Protection Agency (EPA). Supplier certifies that during the term of this Contract will comply with applicable requirements as referenced above. F. DEBARMENT AND SUSPENSION (EXECUTIVE ORDERS 12549 AND 12689). A contract award (see 2 C.F.R. § 180.220) must not be made to parties listed on the government wide exclusions in the System for Award Management (SAM), in accordance with the OMB guidelines at 2 C.F.R. §180 that implement Executive Orders 12549 (3 C.F.R. § 1986 Comp., p. 189) and 12689 (3 C.F.R. § 1989 Comp., p. 235), "Debarment and Suspension." SAM Exclusions contains the names of parties debarred, suspended, or otherwise excluded by agencies, as well as parties declared ineligible under statutory or regulatory authority other than Executive Order 12549. Supplier certifies that neither it nor its principals are presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation by any federal department or agency. G. BYRD ANTI -LOBBYING AMENDMENT, AS AMENDED (31 U.S.C. § 1352). Suppliers must file any required certifications. Suppliers must not have used federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any Rev. 3/2022 15 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any federal contract, grant, or any other award covered by 31 U.S.C. § 1352. Suppliers must disclose any lobbying with non-federal funds that takes place in connection with obtaining any federal award. Such disclosures are forwarded from tier to tier up to the non-federal award. Suppliers must file all certifications and disclosures required by, and otherwise comply with, the Byrd Anti -Lobbying Amendment (31 U.S.C. § 1352). H. RECORD RETENTION REQUIREMENTS. To the extent applicable, Supplier must comply with the record retention requirements detailed in 2 C.F.R. § 200.333. The Supplier further certifies that it will retain all records as required by 2 C.F.R. § 200.333 for a period of 3 years after grantees or subgrantees submit final expenditure reports or quarterly or annual financial reports, as applicable, and all other pending matters are closed. I. ENERGY POLICY AND CONSERVATION ACT COMPLIANCE. To the extent applicable, Supplier must comply with the mandatory standards and policies relating to energy efficiency which are contained in the state energy conservation plan issued in compliance with the Energy Policy and Conservation Act. J. BUY AMERICAN PROVISIONS COMPLIANCE. To the extent applicable, Supplier must comply with all applicable provisions of the Buy American Act. Purchases made in accordance with the Buy American Act must follow the applicable procurement rules calling for free and open competition. K. ACCESS TO RECORDS (2 C.F.R. § 200.336). Supplier agrees that duly authorized representatives of a federal agency must have access to any books, documents, papers and records of Supplier that are directly pertinent to Supplier's discharge of its obligations under this Contract for the purpose of making audits, examinations, excerpts, and transcriptions. The right also includes timely and reasonable access to Supplier's personnel for the purpose of interview and discussion relating to such documents. L. PROCUREMENT OF RECOVERED MATERIALS (2 C.F.R. § 200.322). A non-federal entity that is a state agency or agency of a political subdivision of a state and its contractors must comply with Section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act. The requirements of Section 6002 include procuring only items designated in guidelines of the Environmental Protection Agency (EPA) at 40 C.F.R. § 247 that contain the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; procuring solid waste management services in a manner that maximizes energy and resource recovery; and establishing an affirmative procurement program for procurement of recovered materials identified in the EPA guidelines. Rev. 3/2022 16 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM M. FEDERAL SEAL(S), LOGOS, AND FLAGS. The Supplier cannot use the seal(s), logos, crests, or reproductions of flags or likenesses of Federal agency officials without specific pre -approval. N. NO OBLIGATION BY FEDERAL GOVERNMENT. The U.S. federal government is not a party to this Contract or any purchase by a Participating Entity and is not subject to any obligations or liabilities to the Participating Entity, Supplier, or any other party pertaining to any matter resulting from the Contract or any purchase by an authorized user. 0. PROGRAM FRAUD AND FALSE OR FRAUDULENT STATEMENTS OR RELATED ACTS. The Contractor acknowledges that 31 U.S.C. 38 (Administrative Remedies for False Claims and Statements) applies to the Supplier's actions pertaining to this Contract or any purchase by a Participating Entity. P. FEDERAL DEBT. The Supplier certifies that it is non -delinquent in its repayment of any federal debt. Examples of relevant debt include delinquent payroll and other taxes, audit disallowance, and benefit overpayments. Q. CONFLICTS OF INTEREST. The Supplier must notify the U.S. Office of General Services, Sourcewell, and Participating Entity as soon as possible if this Contract or any aspect related to the anticipated work under this Contract raises an actual or potential conflict of interest (as described in 2 C.F.R. Part 200). The Supplier must explain the actual or potential conflict in writing in sufficient detail so that the U.S. Office of General Services, Sourcewell, and Participating Entity are able to assess the actual or potential conflict; and provide any additional information as necessary or requested. R. U.S. EXECUTIVE ORDER 13224. The Supplier, and its subcontractors, must comply with U.S. Executive Order 13224 and U.S. Laws that prohibit transactions with and provision of resources and support to individuals and organizations associated with terrorism. S. PROHIBITION ON CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT. To the extent applicable, Supplier certifies that during the term of this Contract it will comply with applicable requirements of 2 C.F.R. § 200.216. T. DOMESTIC PREFERENCES FOR PROCUREMENTS. To the extent applicable, Supplier certifies that during the term of this Contract will comply with applicable requirements of 2 C.F.R. § 200.322. 22. CANCELLATION Sourcewell or Supplier may cancel this Contract at any time, with or without cause, upon 60 days' written notice to the other party. However, Sourcewell may cancel this Contract immediately upon discovery of a material defect in any certification made in Supplier's Rev. 3/2022 17 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 011723- KOM Proposal. Cancellation of this Contract does not relieve either party of financial, product, or service obligations incurred or accrued prior to cancellation. Sourcewell DocuSigned by: y S"ayf'� By; COFD2A139D06489— Jeremy Schwartz Title: Chief Procurement Officer 4/18/2023 1 10:36 AM CDT Date: Approved: E fD,occuSigneed�by1:.. ,M^�� (hAW 11` 7E4288F817A64CC... By: Chad Coauette Title: Executive Director/CEO Date: 4/18/2023 1 1:37 PM CDT Komatsu America Corp. ocuSigned by: E�D 64 SFFD8166.. By: 51241F. Rodney Bull Title: EVP North America Region 4/18/2023 1 12:57 PM CDT Date: Rev. 3/2022 18 DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B RFP 011723 - Heavy Construction Equipment with Related Attachments and Technology Vendor Details Company Name: Komatsu America Corp. 8770 W. Bryn Mawr Ave. Address: Suite 100 Chicago, II 60631 Contact: Rebecca O'Donnell Email: KAC_Sourcewell@global.komatsu Phone: 847-437-5800 HST#: 94-1715128 Submission Details Created On: Submitted On: Submitted By: Email: Transaction #: Submitter's IP Address Monday November 21, 2022 13:46:50 Tuesday January 17, 2023 12:43:04 Rebecca O'Donnell KAC_Sou rcewel I@global. komatsu 80bd003e-643a-4ce9-8cba-dcaaae3969c5 198.207.182.9 Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Specifications Table 1: Proposer Identity & Authorized Representatives General Instructions (applies to all Tables) Sourcewell prefers a brief but thorough response to each question. Do not merely attach additional documents to your response without also providing a substantive response. Do not leave answers blank; respond "N/A" if the question does not apply to you (preferably with an explanation). Line Item Question Response 1 Proposer Legal Name (one legal entity only): Company Name: Komatsu America Corp. (In the event of award, will execute the Tax Identification Number: 94-1715128 resulting contract as "Supplier") Telephone Number: (847) 437-5800 2 Identify all subsidiary entities of the Proposer Komatsu America Corp. whose equipment, products, or services are included in the Proposal. 3 Identify all applicable assumed names or DBA Komatsu America does not operated under any assumed names or DBA names names of the Proposer or Proposer's subsidiaries in Line 1 or Line 2 above. 4 Provide your CAGE code or Unique Entity Komatsu America does not have a CAGE code or Unique Entity Identifier Identifier (SAM): 5 Proposer Physical Address: 8770 West Bryn Mawr Avenue Ste 100, Chicago, IL 60631 6 Proposer website address (or addresses): www.Komatsu.com 7 Proposer's Authorized Representative (name, Rebecca O'Donnell title, address, email address & phone) (The Email Address: Rebecca.ODonnell@global.komatsu representative must have authority to sign 309-672-7358 the "Proposer's Assurance of Compliance" on behalf of the Proposer and, in the event of award, will be expected to execute the resulting contract): 8 Proposer's primary contact for this proposal Rebecca O'Donnell (name, title, address, email address & phone): Email Address: Rebecca. 0Don nelI@global.komatsu 309-672-7358 9 Proposer's other contacts for this proposal, if Robert Richens any (name, title, address, email address & Robert. Richens@global. komatsu phone): 435-650-0774 Table 2: Company Information and Financial Strength Line Question Response Item Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 10 Provide a brief history of your company, Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd., the world's 2nd including your company's core values, largest manufacturer and supplier of construction, mining, and compact equipment. business philosophy, and industry longevity Named after the city of Komatsu, Japan, where the company was founded, Komatsu related to the requested equipment, products celebrated it's 100 year anniversary on May 13, 2021. Komatsu America Corp. or services. currently employs approximately 7,600 people in the United States and Canada to serve and support the North American market. Komatsu first founded operations in the United States in 1970. At the time, the mission was to not only become a world class supplier of quality construction equipment, but more importantly to become a trusted partner for the industry and its customers. Today, Komatsu 's commitment is to create value together with our customers and partners, to achieve a sustainable future where businesses, people, and our planet thrive together. Komatsu's core values are deeply rooted in our history and are unique to our corporate identity: 1) Ambition: With a "challenging spirit" and without fear failure, we innovate and always aspire to do more. 2) Collaboration: Creating value comes from teamwork, inclusion, respect, diversity, and a win -win approach to all relationships. 3) Perseverance: Even when work is difficult, we remain committed to our promises and reliably carry them through to completion. 4) Authenticity: To earn and maintain trust, we always act with sincerity, integrity and honesty, and communicate transparently. Our values, combined with our promise of "creating value together", are what drive our strategy and actions every day, guided by the founding principles of the company, established over 100 years ago, to focus on global expansion, quality first, technological innovation, and employee development. 11 What are your company's expectations in the Komatsu America has experienced first hand the increasing focus and need for event of an award? cooperative purchasing contracts within the industry. Like we are doing today, in the event of an award, we will deeply engage our distribution partners to expand our products, services, and solutions to existing Sourcewell members while working with Sourcewell to expand the membership base through the promotion of new opportunities with our contract. Additionally, we plan to partner closer with Sourcewell to leverage their expertise and training resources to drive a higher participation rate and awareness amongst our distribution as well as new potential members. We also believe there is an opportunity to drive higher participation with state level adoptions of our contract. 12 Demonstrate your financial strength and Komatsu Ltd. is a publicly traded company and is listed on the Tokyo Stock stability with meaningful data. This could Exchange. include such items as financial statements, Komatsu Ltd.'s consolidated business results for FY2021 (year ending March 31, SEC filings, credit and bond ratings, letters 2022) as well as the first six months of FY2022 (through September 30, 2022) have of credit, and detailed reference letters. been attached in the document section, labeled as "Financial Strength & Stability - Upload supporting documents (as applicable) FY22 YE Statement and 6 months ending 09.30.22-zip file". in the document upload section of your response. For FY2021, Komatsu's consolidated net sales exceeded 2.8 Trillion Yen, which based on the exchange rate identified on page 7 of the attached report is approximately $25.0 Billion (US). The United States and Canada make up about 23% of equipment sales to outside customers. Through the first six months of FY2022, revenue exceeded 1.6 Trillion Japanese Yen, which based on the exchange rate identified on page 6 of the attached report is approximately $12.3 Billion (US). The United States and Canada make up about 25% of equipment sales to outside customers this year to date. 13 What is your US market share for the Komatsu America Corp. considers market share to be confidential and proprietary solutions that you are proposing? and therefore is unable to disclose market share as part of this RFP response 14 What is your Canadian market share for the Komatsu America Corp. considers market share to be confidential and proprietary solutions that you are proposing? and therefore is unable to disclose market share as part of this RFP response 15 Has your business ever petitioned for Komatsu America Corp. has never petitioned for bankruptcy protection bankruptcy protection? If so, explain in detail. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 16 How is your organization best described: is B) Komatsu America Corp. is best described as a manufacturer. it a manufacturer, a distributor/dealer/reseller, or a service provider? Answer whichever Komatsu America Corp. has 29 distributors across the United States and Canada question (either a) or b) just below) best that market, sell, and support our products. applies to your organization. a) If your company is best described as Two of these distributors are wholly owned by Komatsu and have a total of 21 a distributor/dealer/reseller (or similar entity), locations and 557 employees. The other 27 distributors are independently owned provide your written authorization to act as a with 242 locations and partner with Komatsu, under dealer agreements, to provide distributor/dealer/reseller for the manufacturer sales, service, and parts support for the products offered in this proposal within their of the products proposed in this RFP. If respective regions. Komatsu's North American distribution network has been in applicable, is your dealer network business for an average of 67 years which demonstrates the longevity and strength independent or company owned? of our dealer network, which we believe is a differentiating strength. b) If your company is best described as a manufacturer or service provider, describe your relationship with your sales and service force and with your dealer network in delivering the products and services proposed in this RFP. Are these individuals your employees, or the employees of a third party? 17 If applicable, provide a detailed explanation To the best of our knowledge, Komatsu America Corp. as well as its distributors outlining the licenses and certifications that hold all licenses and certifications necessary to pursue the business contemplated are both required to be held, and actually by this RFP. held, by your organization (including third parties and subcontractors that you use) in pursuit of the business contemplated by this RFP. 18 Provide all "Suspension or Debarment" There has been no Suspension or Disbarment information applied to Komatsu information that has applied to your America Corp. during the past ten years. organization during the past ten years. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 3: Industry Recognition & Marketplace Success Line Item Question Response' 19 Describe any relevant industry awards or 1) Komatsu selected in the Dow Jones Sustainability Indices again in 2022. recognition that your company has received Komatsu has been recognized every year since 2014. in the past five years https://www.komatsu.jp/en/newsroom/2022/20221212 2) Komatsu recognized with prestigious double 'A' score for global climate and water stewardship. This is another award that Komatsu has received every year since 2014. hftps://www.komatsu.jp/en/newsroom/2022/20221213 3) Komatsu named one of the safest companies in America by EHS Today (2018) https://www.apnews.com/9641 5e2O96194fca87ea59c8afc2OcO3 4) NIOSH Mine Safety and Health Technology Innovations Award (2018) hftps://www.cdc.gov/niosh/mining/content/innovationsawards.html 5) Komatsu Receives the Grand Prix of the Corporate Value Improvement Award from Tokyo Stock Exchange (2020) https://www.komatsu.jp/en/newsroom/2020/20200128 6) 2022 Construction Equipment's Top 100. Heavy Earthmoving Equipment for the Komatsu WA480-8 Wheel Loader. Komatsu also received the Smart Construction Retrofits Award for Excavators and the Ancillary Award for the KMHB-V series. hftps://www.constructionequipment.com/top-1 00 7) 2021 Tucson Electric Power awards Komatsu with the Pioneering Partner Award for it's work in conjunction with Asarco Mine in developing sustainable solutions through zero -emission mining equipment and infrastructure. https://www.tep.com/news/2021-go-green-award-recipients-building-a-more-sustainable- future/ 8) 2021 ESG Reduction & Monitoring Awarded by Mining Magazine for Komatsu's Greenhouse Gas Alliance as well as the Load and Haul Award for the development and expansion of tele-remote products to increase safety https://www.miningmagazine.com/operational-excellence/news/1425271 /mining-magazine- awards-2021-the-winners 9) Equipment World: Two Komatsu models rank the highest in retained value by EquipmentWatch, the D85EX-18 and the PC78US-10 (2022) https://www. komatsu.com/en/newsroom/2022/ew-models-with-h ig hest -retained -value/ 20 What percentage of your sales are to the Approximately 1% of Komatsu's construction equipment sales are to the governmental sector in the past three years governmental sector over the past three years, which is why this segment remains a targeted area of growth for Komatsu. 21 What percentage of your sales are to the Over the past three years, less than 1% of Komatsu's construction equipment sales education sector in the past three years are to the education sector. Like the governmental segment, we see this as a potential target for growth as well for specific products and solutions. 22 List any state, provincial, or cooperative At this time, the state of Washington has adopted the current Komatsu Sourcewell purchasing contracts that you hold. What is contract, however there are no sales to report. In the event of another contract the annual sales volume for each of these award, this is a target area to partner with Sourcewell to pursue these opportunities contracts over the past three years? and leverage their expertise and resources to achieve further state adoptions of our contract. By partnering with Sourcewell, we can also better work with our distributors to engage these state level opportunities and ensure we are collectively supporting their procurement needs. 23 List any GSA contracts or Standing Offers Komatsu America does not currently have any GSA Contracts or Standing Offers and Supply Arrangements (SOSA) that you and Supply Arrangements. hold. What is the annual sales volume for each of these contracts over the past three years? Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 4: References/Testimonials Line Item 24. Supply reference information from three customers who are eligible to be Sourcewell participating entities. Entity Name * Contact Name Phone Number* Department of Public Works, Marshfield, MA Tom Reynolds 508-922-6434 965 Plain Street Marshfield, MA 02050 https://www.marshfield-ma.gov/public-works Coweta County Board of Commissioners Ryan Phillips 770-254-2601 70 Selt Road rphillips@coweta.ga.us Newnan, GA 30263 https://www.coweta.ga.us/ Village of Farmingdale, Farmingdale NY Kenny Tortoso 516-249-0093 361 Main Street, Suite 1 Farmingdale, NY 11735 http://www.farmingdalevillage.com/index.htm City of Grand Prairie, Texas Jayson R. Ramirez, Director of General Services 972-237-2002 318 W Main Street Jrramirez@gptx.org Grand Prairie, TX 75051 City of Dallas Donzell Gipson, Director 614-671-5725 3202 Canton Street Dallas, TX 75226 https://dallascityhall.com/departments/equipment buildingservices/ Table 5: Top Five Government or Education Customers Line Item 25. Provide a list of your top five government, education, or non-profit customers (entity name is optional), including entity type, the state or province the entity is located in, scope of the project(s), size of transaction(s), and dollar volumes from the past three years. Entity Name Entity Type ` State / * Scope of Work * Size of Transactions * Dollar Volume Past Three Province Years NYC Government New York -NY Wheel Loaders. Sanitation Work 28 units Approx. $11 million Department of Sanitation DeKalb County Government Georgia - GA Wheel Loaders. Transfer Stations 6 units Approx. $3.4 million City of Irving Government Texas -TX Excavators / Trucks 4 units Approx. $3.2 million Roads & General Construction City of Government Alabama - AL Excavators / Dozers 3 units Approx. $2.3 million Birmingham Utility & Sewer / Landfill Escambia Government Florida - FL Excavators 8 units Approx. $1.9 million County Road Construction & Maintenance Table 6: Ability to Sell and Deliver Service Describe your company's capability to meet the needs of Sourcewell participating entities across the US and Canada, as applicable. Your response should address in detail at least the following areas: locations of your network of sales and service providers, the number of workers (full-time equivalents) involved in each sector, whether these workers are your direct employees (or employees of a third party), and any overlap between the sales and service functions. LemQuestion Response* 26 Sales force. Across the US and Canada, Komatsu America has over 590 sales representatives in our dealer network. Supporting the distributor sales representatives are 19 Komatsu District Sales Managers located in the field. Specific to the Sourcewell contract, Komatsu also has a dedicated National Account Manager that is responsible for actively promoting and training within Komatsu as well as the dealer network on the contract, in conjunction with support from the Sourcewell Supplier team. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 27 Dealer network or other distribution Komatsu America has 29 dealers across the United States and Canada with 263 methods. locations. The Komatsu distribution network is responsible for the sales and support of products that are offered in this proposal, backed by Komatsu America's field representatives for sales, product support and parts needs. Komatsu has 19 District Sales Managers, 16 Customer Support representatives, and 12 District Parts Sales Managers that are all field based in order to be responsive to Sourcewell member needs. 28 Service force. From a product support standpoint, there are 1,959 distributor technicians that focus on the support of Komatsu equipment. Technicians are factory trained and certified using the most up to date product knowledge and technology to provide the level of support expected by Sourcewell members. Supporting our distributor force are 16 Komatsu Customer Support Managers, positioned across the U.S. and Canada, that work closely with our distributors to resolve technical issues. 29 Describe the ordering process. If orders The ordering process will be handled as follows: will be handled by distributors, dealers or 1) Every Komatsu distributor will be provided the Sourcewell contracted billing rates. others, explain the respective roles of the Proposer and others. 2) When a Sourcewell member is in need of a quote, they will contact the local Komatsu distributor within that territory. The distributor will quote the machine and all eligible options using the contracted billing rates. The distributor may also add non - contracted items, or "sourced goods", to the quote like freight or assembly costs, and will communicate the lead time of the products and options. 3) When the Sourcewell members accepts the quote, they will then issue a PO directly to the distributor to process the order. The Sourcewell member PO should identify the contract/bid number. 4) If the member chooses to add terms or conditions to the PO, they will need to discuss these with the distributor directly because the distributor will take responsibility for agreeing with the terms. 5) The distributor will ship the machine to the buying agency and will invoice upon receipt. 6) Komatsu distributors are responsible for reporting monthly sales to Komatsu in accordance with our standard reporting process for National Account Customers. 30 Describe in detail the process and Komatsu's product support activity takes place through an extensive distribution procedure of your customer service network of 29 dealers with 263 branch locations across the US and Canada. All program, if applicable. Include your distributor technicians are certified through Komatsu's technician training programs to response -time capabilities and ensure they are capable of efficiently troubleshooting technical issues and performing commitments, as well as any incentives maintenance and repair work, consistently across the entire dealer network. that help your providers meet your stated service goals or promises. Most machines within this proposal come standard with Komatsu Care which is a complimentary 3 year / 2,000 hour maintenance program. As part of this maintenance, a certified technician will typically perform this work on a customer site, and will also perform a 50 point inspection at each maintenance interval to identify any potential issues or needs for the end user. All distributors use Komtrax telematics, a standard system included on all Komatsu machines within this proposal, in order to provide enhanced product support. Komtrax helps distributors to remotely diagnose issues before traveling to a machine which leads to fewer trips and faster repair times, ultimately maximizing machine availability for the customer. All Komatsu dealers are equipped with service trucks which allow technicians to perform maintenance and repair work on a customer site when possible, depending on the severity of the technical issue. Sourcewell members should contact their local Komatsu distributor when service work is needed. The number of service trucks and technicians does vary by dealer, so based on the request, a distributor will be responsible to dispatch a technician when needed. Sourcewell members will also have access to an online portal called My Komatsu. Through this website, customers will be able to look up and purchase parts for their machines but will also have access to machine information, including data that is provided by the standard Komtrax telematics system. 31 Describe your ability and willingness to As part of this proposal, Komatsu America is able and willing to provide our provide your products and services to products and services to Sourcewell participating entities in all 50 United States. Sourcewell participating entities in the United States. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 32 Describe your ability and willingness to As part of this proposal, Komatsu America can and will be able to provide the same provide your products and services to products and services to Sourcewell participating entities across Canada in the same Sourcewell participating entities in Canada. way it will be provided in the U.S. Komatsu America will also continue to work with our Canadian distributors to deepen in our partnership with Canoe to ensure those participating entities receive the same level of service and support. 33 Identify any geographic areas of the United This proposal excludes areas identified as U.S. territories, including but not limited to States or Canada that you will NOT be Guam, American Samoa, Puerto Rico, and the U.S. Virgin Islands. Komatsu does fully serving through the proposed contract. not have adequate distribution located in these defined U.S. territories and would be unable to provide the level of support expected from Sourcewell members in all 50 US states and Canada. 34 Identify any Sourcewell participating entity Komatsu America will be fully serving all Sourcewell Member sectors entity sectors; sectors (i.e., government, education, not -for- government, education, and not -for -profit. profit) that you will NOT be fully serving through the proposed contract. Explain in detail. For example, does your company have only a regional presence, or do other cooperative purchasing contracts limit your ability to promote another contract? 35 Define any specific contract requirements Komatsu and its distributors will be serving Sourcewell members in all 50 states, or restrictions that would apply to our including Alaska and Hawaii. However, due to the limited distribution capabilities in participating entities in Hawaii and Alaska U.S. Territories such as Guam, American Samoa, Puerto Rico, and the U.S. Virgin and in US Territories. Islands, this proposal excludes these defined U.S. Territories because Komatsu will be unable to provide the level of support expected from Sourcewell members in all 50 US states and Canada. Table 7: Marketing Plan Line Item 36 Question Describe your marketing strategy for promoting this contract opportunity. Upload representative samples of your marketing materials (if applicable) in the document upload section of your response. Response Komatsu has a robust marketing department and presence that will prove effective in the promotion of this contract opportunity: 1) Upon a contract award, Komatsu will issue a press release that will be issued to all major industry publications. In addition, most distributors issue their own publications within their territory that will promote this contract opportunity and its benefits. 2) From our experience, we know that a proper training framework with our distributors is imperative for success. In addition to using Komatsu's existing web training platform, we know that in person training, conducted with the support of Sourcewell representatives, will drive better engagement and promotion at the dealer level. 3) We believe that another element for success is to utilize the great resources offered by Sourcewell, such as the Sales Accelerator and Sourcewell University programs, which we will leverage to better promote the contract and benefits within our dealer network. 4) We've identified that certain trade shows, such as Waste Expo, have a higher level of attendance from existing and potential Sourcewell members. We will promote the contract while at these trade shows not only to bring awareness, but to engage in deeper conversation about the benefits of our contract. A sample of this trade show promotion has been attached. 5) Komatsu has a strong web presence, therefore a dedicated web page will be on the Komatsu website to promote and provide information about the contract. We will also link this site back to Sourcewell to provide quick access to information for members. In addition, with authorization from Sourcewell members, we would use the dedicated webpage to promote successful stories and training opportunities. 6) Komatsu also boasts a significant presence on social media with 36,273 followers on Twitter, 231,088 followers on Facebook and 225,000 followers on Linkedln. Each of these channels will be leveraged to promote this contract opportunity and benefits. 7) High quality marketing materials will be created and issued to further promote the value of this contract opportunity. Representative samples have been attached to this submission. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 37 Describe your use of technology and The use of technology is core to Komatsu's business philosophy, so it will be instrumental digital data (e.g., social media, to enhance our marketing effectiveness. metadata usage)to enhance marketing effectiveness. Komatsu's website is a single and easy to use source of information about Komatsu, our products, and solutions, therefore this platform will be key to marketing our contract and building awareness of the benefits. As previously mentioned, there will be a Sourcewell specific web page on the Komatsu site that will provide instant access to information about our contract from our press release, marketing materials, videos, and success stories. In addition to the webpage, Komatsu's social media and online presence will be an important tool in maximizing the effectiveness of our marketing efforts to promote the contract: https://www.facebook.com/KomatsuConstructionnorthamerica hftps://www.linkedin.com/company/komatsuconstruction/ hftps://twitter.com/komatsuconstrna hftps://www.instagram.com/komatsuconstructionna/ hftps://www.youtube.com/c/KomatsuConstruction https://www.facebook.com/komatsuforestnorthamerica https://www.linkedin.com/company/komatsu-forest-na/ https://twitter.com/komatsuforestna hftps://www.instagram.com/komatsuforestna/ https://www.youtube.com/c/KomatsuForestNorthAmerica 38 In your view, what is Sourcewell's role Komatsu America views this contract as a partnership with Sourcewell. We believe that in promoting contracts arising out of Sourcewell's team will play an integral role in assisting our National Account Manager(s) in this RFP? How will you integrate a promoting the contract and assisting with training our dealer network, both virtually and in Sourcewell-awarded contract into your person. We anticipate that Sourcewell would attend numerous dealer meetings and sales process? training sessions, attend trade shows to help promote the contract, and will have a key role in educating distributors as well as existing or potential members of the value of this contract. The sales process for Sourcewell will follow the current process that is place with the existing contract, which is also identical to the process used for large National Accounts, with the benefit of set billing rates to ensure accurate pricing and top tier support. 39 Are your products or services An e-procurement ordering process is not a service that is available through Komatsu available through an e-procurement America Corp. at this time for machine purchases. However, Komatsu does provide ordering process? If so, describe your online parts purchasing through a web platform called "My Komatsu". This site provides a e-procurement system and how portal for customers to look up and purchase parts as well as provides access to governmental and educational extensive equipment data provided by Komtrax. customers have used it. Table 8: Value -Added Attributes Line Item 40 Question Describe any product, equipment, maintenance, or operator training programs that you offer to Sourcewell participating entities. Include details, such as whether training is standard or optional, who provides training, and any costs that apply. Response* Komatsu America has a dedicated training facility and department located in Cartersville, GA. Professional Komatsu instructors develop multiple levels of training programs, designed for both operators as well as technicians. Most Komatsu distributors also have dedicated training staff, certified as trainers by Komatsu, and are in place to support end user needs regionally. Any training requests by Sourcewell members would be managed by the Komatsu distributor. Depending on the depth of the training requests, there may be a cost associated with it. Komatsu also provides, at no charge, access to high level informational videos on product and solutions, available on YouTube. Here are some examples of these basic training videos: hftps://www.youtube.com/watch?v=lejOBYVWhUl hftps://www.youtube.com/watch?v=xFuRkTHPyxs https://www.youtube.com/watch?v=M 1 ACvnyOocl Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 41 Describe any technological Komatsu prides itself on driving technological innovation to support our industry and advances that your proposed customers: products or services offer. Komatsu was the first equipment manufacturer to introduce products equipped with Intelligent Machine Control (iMC) with a 3D GPS system fully integrated into the machine. There are now 13 crawler dozer models and 5 excavator models available with this technology and offered in this proposal. These products are also supported by a network of dealer Technology Solutions Experts (TSE's). In addition to the iMC machines, Komatsu offers two Hybrid Excavator models that utilize a fully electric swing motor to captures wasted energy, that can be use to power the swing and boost the engine performance. Fuel consumption is decreased by up to 20% which also reduces Green House Gas emissions. Komatsu's newly redesigned WA475-10 wheel loader features next -generation technology, a Komatsu Hydraulic Mechanical Transmission, to deliver improved productivity and lower fuel consumption, providing up to a 30% improvement in fuel efficiency. Komatsu also continues to advance its telematics system, Komtrax. Now accessible through a new online portal called "My Komatsu", customers have convenient access to critical machine data across mixed fleets that provides valuable insights into fleet productivity. My Komatsu provide telematics, remote fleet monitoring, parts ordering, service manuals as well as more general product information. 42 Describe any "green" initiatives To enhance sustainable actions, we have focused on four key areas: that relate to your company or to CO2 reduction, renewable energy use, water conservation and waste reduction. your products or services, and include a list of the certifying Komatsu aims to reduce carbon emissions by 50% by 2023 with a goal of carbon agency for each. neutrality by 2050. To obtain this goal we will look at our Production facilities and continue to implement renewable energy sources and purchase renewable energies. We are also working on the development of numerous products that will reduce fuel consumption by utilizing cleaner power sources such as electric, hybrid, hydrogen and bio-diesel fuel. Komatsu holds ISO14001 certification which is internationally recognized. Komatsu is also proud of our reforestation efforts boasting over 470,000 trees planted to date around the world. 43 Identify any third -party issued eco- Komatsu factories are ISO 9001:2015 certified for quality management. labels, ratings or certifications that your company has received for Komatsu factories are ISO 14001:2015 certified for environmental management systems. the equipment or products included in your Proposal related Komatsu factories are either ISO 45001 or OHSAS 18001 certified for occupational health to energy efficiency or and safety management systems. conservation, life -cycle design (cradle -to -cradle), or other green/sustainability factors. 44 Describe any Women or Minority Komatsu does not hold any WMBE or SBE certifications, however Komatsu values and Business Entity (WMBE), Small respects the diversity of its employees and the communities in which it operates. Based Business Entity (SBE), or veteran on our Worldwide Code of Business Conduct, Komatsu members shall not discriminate owned business certifications that against any employee on the basis of nationality, race, ethnicity, color, sex, sexual your company or hub partners orientation, gender identity, age, religion, national ancestry, disability, marital status or any have obtained. Upload other legally protected status. documentation of certification (as applicable) in the document https://home.komatsu/en/company/conduct/ upload section of your response. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 45 What unique attributes does your The Smart Construction solutions provided by Komatsu have changed the game in company, your products, or your transforming job site efficiencies and profitability. Our industry is on the cusp of rapid services offer to Sourcewell change and innovation — where advanced automation and integrated technologies intersect. participating entities? What makes Our Smart Construction solutions harness technology for accurate data, comprehensive your proposed solutions unique in reporting and remote capabilities. In addition to Smart Construction, Komatsu offers newly your industry as it applies to updated My Komatsu, our Genuine Care Program and a highly skilled dealer network that Sourcewell participating entities? supports our customer base. Komatsu Harmony: Major components are designed and manufactured by Komatsu, allowing us to optimize the performance of engines, transmissions, and hydraulic systems to maximize productivity while minimizing fuel consumption. Komatsu Care: Tier 4 Final machines come standard with Komatsu Care, an industry exclusive program that offers complimentary maintenance for 3 years / 2,000 hours as well as a complimentary DPF exchange program for machines equipped with this engine technology. We've completed over 100,000 service intervals under this program. Four of the compact excavator models in this proposal do not have the Komatsu Care program, however come with extended powertrain coverage. See enclosed brochures on the attached flash drive. Machine Diagnostics: Komatsu machines have full diagnostic capability through the monitor panel in the cab and do not require special software or a laptop to diagnose and resolve most issues. TSE Support Network for IMC: A dedicated network of Technology Solutions Experts is in place to support the Intelligent Machine Control products and business needs for customers. Komatsu Remote Solutions: Komatsu has started the process of updating controller software using Komtrax telematics when possible instead of dispatching technicians to a machine. While not all controllers are able to be updated today, we continually expand our capability to update additional controllers across the product lines. North American Manufacturing: While machines are sourced globally through multiple factories, Komatsu does have two factories in North America producing the majority of excavator and wheel loader models offered in this proposal. Undercarriage Assurance Program: Komatsu offers additional coverage for undercarriage on Komatsu dozers, protecting against leakage and breakage due to defects in material or workmanship for the term. Please see the attached Undercarriage Program Certificate. Advantage Warranty: Through the Komatsu distributor, Komatsu offers a variety of extended warranty options with different levels of coverage and terms. These will be quoted as a non -contract item. Table 9: Warranty Describe in detail your manufacturer warranty program, including conditions and requirements to qualify, claims procedure, and overall structure. You may upload representative samples of your warranty materials (if applicable) in the document upload section of your response in addition to responding to the questions below. Line Item 46 Question Do your warranties cover all products, parts, and labor? Response' Komatsu offers several types of warranties and all warranty repair work is performed by Komatsu factory certified distributor technicians. All new machines come with a Standard Product Warranty and an Emission Control Warranty. Both the Standard Product and Emission Control warranties cover parts and labor. Komatsu also offers an extensive Advantage Extended Warranty Program. Customers have the ability to purchase different levels of additional coverage from any combination of up to 5 years or 10,000 hours. The Advantage program also covers parts and labor expense. Included with this submission is a copy of the Standard Product Warranty Certificate and Advantage Warranty Certificate which contains additional details about these warranties. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 47 Do your warranties impose usage restrictions or The Standard Product Warranty is 12 months / unlimited hours. other limitations that adversely affect coverage? The Emission Control Warranty is 5 years / 3,000 hours. Advantage Extended Warranty Coverage is available in any combination up to 5 years or 10,000 hours. Komatsu's warranties protect against defects in material and workmanship. The attached Standard Product Warranty Certificate and Advantage Warranty Certificate outline the limitations of Komatsu's warranties, which includes misuse or unauthorized modifications to the products. 48 Do your warranties cover the expense of The Standard Product Warranty, Emission Control Warranty, and Advantage technicians' travel time and mileage to perform Extended Warranty coverage includes technician's mileage but excludes warranty repairs? travel time. While it is recommended that customers return the product to the distributor from which it was purchased, customers can take machines to the most convenient authorized Komatsu distributor to service a product. 49 Are there any geographic regions of the United There are no geographic regions of the United States or Canada where a States or Canada (as applicable) for which you Komatsu distributor cannot provide a certified technician to perform warranty cannot provide a certified technician to perform repairs. warranty repairs? How will Sourcewell participating entities in these regions be provided Komatsu has an extensive distributor network with 263 dealer branches service for warranty repair? covering all regions of the United States and Canada. One of Komatsu's primary advantages is our ability to service customers in all regions of North America. Sourcewell members will also have access to an easy to use, online Dealer Locator to find the most convenient service location. 50 Will you cover warranty service for items made by For components provided in new machines from the factory, warranty repair other manufacturers that are part of your proposal, work is completed by an authorized Komatsu distributor, and claims are or are these warranties issues typically passed on submitted to Komatsu. to the original equipment manufacturer? Some products within this proposal offer options supplied by "Allied" vendors, which are generally attachments such as buckets, couplers, etc. Allied vendors offer their own specific warranties. For warranty on these options, the Sourcewell member will contact their local distributor for the repair work and the distributor will process warranty claims directly with the Allied vendor. 51 What are your proposed exchange and return As stated in the Standard Product Warranty Certificate, if a defect is found programs and policies? during the Warranty Period, Komatsu, at its option, will repair or replace any part or component which fails to conform to the warranty. 52 Describe any service contract options for the Most Komatsu machines come standard with Komatsu Care, an industry items included in your proposal. exclusive program that offers complimentary maintenance for 3 years / 2,000 hours as well as a complimentary KDPF exchange program for machines equipped with this engine technology. The only exclusion to this complimentary maintenance program are the four compact excavator models included in this proposal. In addition to the complimentary maintenance program, Komatsu also offers extended service contract options that can be purchased from an authorized distributor, to better support customers in controlling costs and increasing uptime: 1) Komatsu Care Plus, which includes extended maintenance beyond the complimentary period. 2) Komatsu Care Plus II, which includes extended maintenance and repair, providing the benefit of both fixed maintenance and repair costs. 3) Komatsu Care Plus III, which provides all the benefits of the Care Plus II program, but also adds consumables. Attached in this submission is a brochure outlining all the details of Komatsu's Repair And Maintenance Programs Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 10: Payment Terms and Financing Options Line Item Question Response* 53 Describe your payment terms and accepted payment Payment Terms are net 45 days or whatever is agreed to by the methods. Sourcewell member and our Komatsu distributor at the time of sale. 54 Describe any leasing or financing options available for use We currently do not offer a finance option for Government sales, but by educational or governmental entities. Komatsu does have a Lease product offered through our captive finance company, Komatsu Financial. The Sourcewell member will need to work through their local Komatsu dealer to see if the lease option meets their needs. See Documents -Additional Documents- KF7 Municipal Lease Program for further details on the Lease Option. Additionally, if financing is requested by the Sourcewell member, they can work with their local Komatsu distributor for financing alternatives. 55 Describe any standard transaction documents that you Each Komatsu distributor will be provided the Sourcewell "billing propose to use in connection with an awarded contract rates' for this contract - See Document Section-Pricing-Sourcewell (order forms, terms and conditions, service level Contract Billing Rates & List Discounts. When a Sourcewell agreements, etc.). Upload a sample of each (as member is seeking a quote, they will contact their local Komatsu applicable) in the document upload section of your distributor for assistance. The distributor will quote the machine and response. KAC sourced eligible options using the Sourcewell billing rates. The distributor will add non -contracted costs to the quote, including freight, assembly, or "sourced goods". As part of the Sourcewell contract pricing, Pre Delivery Inspection (PDI) is included and will be completed by the distributor prior to delivery. Within the Document section, we have attached the PDI forms for each product line to illustrate the process that will be completed. The dealer will also communicate the lead time of the product and options. If accepted, the Sourcewell member will issue the PO directly to the distributor who will process the order. The PO should note the Sourcewell contract number. If the buying agency wants to add terms or conditions to the PO, the agency will need to discuss these with the distributor who takes responsibility for agreeing with the terms. The distributor will ship the machine to the buying agency and will invoice the buying agency upon receipt. Komatsu dealers are responsible to report sales to Komatsu monthly in accordance with our standard reporting process for all final deliveries. Attached in the Document section is a representative example of a quotation sheet that a distributor would use to quote a Sourcewell member. Due to different business systems, quotation forms may vary by distributor, but will follow a similar structure. 56 Do you accept the P-card procurement and payment Komatsu America Corp. does not accept the P-card procurement process? If so, is there any additional cost to Sourcewell and payment process. We recommend that the Sourcewell member participating entities for using this process? contact their local distributor directly to determine if that distributor does accept the P-card process and whether any fees would apply. Table 11: Pricing and Delivery Provide detailed pricing information in the questions that follow below. Keep in mind that reasonable price and product adjustments can be made during the term of an awarded Contract as described in the RFP, the template Contract, and the Sourcewell Price and Product Change Request Form. Line Question Response* Item Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 57 Describe your pricing model (e.g., line -item discounts or Within this submission are the price lists for the products offered in product -category discounts). Provide detailed pricing data this proposal. Each price list contains the list prices of the base (including standard or list pricing and the Sourcewell machine and all available options, identified by individual sales discounted price) on all of the items that you want codes. The price lists also identify items that are standard Sourcewell to consider as part of your RFP response. If equipment and included in the base machine price. The price lists applicable, provide a SKU for each item in your proposal. also contain options supplied by "Allied", or non -Komatsu vendors. Upload your pricing materials (if applicable) in the document upload section of your response. Komatsu has provided a billing rate for every model offer in this contract - See Document Section-Pricing-01.17.2023 KAC Price List/Sourcewell Contract Billing Rates & List Discount. The billing rates when multiplied by the Komatsu List Price represents the Sourcewell member price, FOB the factory or stockyard. These billing rates include PDI, or Pre Delivery Inspection, to be performed by the distributor prior to delivery. The billing rate will only be applied to the base machine, factory options, or Allied options listed in the Komatsu price list, which we consider contracted items. Any Sourced Good that a buying agency requests to be quoted that is not included within the Komatsu price list will be negotiated directly with the local distributor and added to the Komatsu purchase price. See Documents -Additional Documents-WA200 Pricing Example for machine pricing. 58 Quantify the pricing discount represented by the pricing The Sourcewell member discount range is between 28.6% and proposal in this response. For example, if the pricing in 58.8% off List Price, depending on the model. See the document your response represents a percentage discount from section-Pricing-Sourcewell Contract Billing Rates & List Prices. MSRP or list, state the percentage or percentage range. 59 Describe any quantity or volume discounts or rebate Komatsu does not have any volume discount or rebate program as programs that you offer. part of this proposal. If the buying agency is purchasing more than 3 units on the same purchase order, the distributor will contact Komatsu to receive additional incentives for this volume purchase. Because Komatsu will review all volume purchases, additional discounting will be consistent across North America. 60 Propose a method of facilitating "sourced" products or Komatsu considers "sourced" products as non -contract items, items related services, which may be referred to as "open that are not included in the Komatsu price list for a model. market" items or "nonstandard options". For example, you Komatsu distributors are capable and authorized to supply non - may supply such items "at cost" or "at cost plus a contact items to Sourcewell members. If requested, sourced percentage," or you may supply a quote for each such products will be quoted and negotiated directly with the Sourcewell request. member by the Komatsu distributor. 61 Identify any element of the total cost of acquisition that is All machine pricing within this proposal is FOB the factory or NOT included in the pricing submitted with your response. stockyard and includes PDI. Through the PDI (Pre -Delivery This includes all additional charges associated with a Inspection) Process, the dealer is responsible to ensure the purchase that are not directly identified as freight or machine has proper fluid levels, system pressures, and is operating shipping charges. For example, list costs for items like pre- to Komatsu's standard specification prior to delivery to the delivery inspection, installation, set up, mandatory training, Sourcewell member. or initial inspection. Identify any parties that impose such costs and their relationship to the Proposer. 1) Prep / Assembly Costs: If there are any prep or assembly costs associated with the product before delivery, such as but not limited to machine assembly, bucket / coupler, thumb installation, or Allied vendor product installation and setup, the dealer will quote these costs separately from the machine itself. 2) Fuel Charge: A dealer may elect to quote delivery of the machine with a full tank of fuel which would be identified as a separate cost item on the quote. A Sourcewell member may request the distributor not fill the fuel tank prior to delivery. 3) Sourced Goods: If a buying agency requests any sourced good items, such as but not limited to attachments or extended warranty / maintenance programs, these items will be quoted in addition to the price of the machine directly by the distributor. 62 If freight, delivery, or shipping is an additional cost to the The Komatsu price (List Price x Billing Rate) will be FOB from the Sourcewell participating entity, describe in detail the factory or stockyard. This will also apply to machines shipping to complete freight, shipping, and delivery program. Alaska, Hawaii, and Canada. At the time of quote, the distributor can itemize the costs for inbound and outbound freight from the dealer branch location to the customer's delivery point. A buying agency may also elect to pick up the machine and that can be arranged directly with the distributor. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B 63 Specifically describe freight, shipping, and delivery terms or The Komatsu price will be FOB from the factory or stockyard, and programs available for Alaska, Hawaii, Canada, or any the dealer will be responsible to quote all freight and delivery offshore delivery. charges directly to the Sourcewell member, including to locations in Alaska, Hawaii, and Canada. A buying agency may also elect to pick up the machine and that can be arranged directly with the distributor. 64 Describe any unique distribution and/or delivery methods or There is nothing in this proposal that we would describe as unique options offered in your proposal. distribution or delivery method options. Table 12: Pricing Offered Line Item The Pricing Offered in this Proposal is: " Comments 65 c. better than the Proposer typically offers to GPOs, cooperative procurement organizations, or state purchasing Sourcewell Members will departments. receive a better price that other GPOs, cooperative procurement organizations, or state purchasing departments. Table 13: Audit and Administrative Fee Line Item Question Response" 66 Specifically describe any self -audit process or program that you Komatsu America Corp. will manage the Sourcewell contract plan to employ to verify compliance with your proposed Contract with internal processes currently used to manage our existing with Sourcewell. This process includes ensuring that Sourcewell Sourcewell contract as well as National Account contracts. participating entities obtain the proper pricing, that the Vendor reports all sales under the Contract each quarter, and that the Every Komatsu distributor in North America has assigned a Vendor remits the proper administrative fee to Sourcewell. Provide point of contact to support the Sourcewell contract and its sufficient detail to support your ability to report quarterly sales to members. Each distributor will be provided with the Sourcewell as described in the Contract template. Sourcewell billing rates and the most up to date, Sourcewell approved Komatsu price list. The distributor is responsible for pricing the products using the Sourcewell member discounts. Each distributor is responsible to report their quotations to Komatsu America Corp. which will employ a process to check accuracy. Corrective action will take place immediately if there are any mistakes or issues. Each key point of contact at the dealer is also responsible to report sales monthly. Komatsu will audit this data through an internal report that matches all Komatsu final deliveries with the Sourcewell member listing. Komatsu will then ask the selling distributor to confirm if the matches were a Sourcewell deal. This double check is used to confirm that 100% of sales to Sourcewell members are reported and the proper administrative fee is submitted to Sourcewell. 67 If you are awarded a contract, provide a few examples of internal The following three examples of metrics can and will be metrics that will be tracked to measure whether you are having used to drive action, both internally, and with dealer success with the contract. management: 1) With an existing Sourcewell contract, we are able to track dealer quote participation as well as success, which will be used to measure sales growth under the new contract. 2) Dealer training participation and completion to communicate with dealer management personnel. 3) Market Share - we can track government sales and market share by dealer or region and evaluate if share growth is through our contract. 68 Identify a proposed administrative fee that you will pay to Komatsu America Corp. is proposing an administrative fee Sourcewell for facilitating, managing, and promoting the Sourcewell of 1.0% payable to Sourcewell for this contract. Contract in the event that you are awarded a Contract. This fee is typically calculated as a percentage of Vendor's sales under the Contract or as a per -unit fee; it is not a line -item addition to the Member's cost of goods. (See the RFP and template Contract for additional details.) Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 14A: Depth and Breadth of Offered Equipment Products and Services Line Item Question Response* 69 Provide a detailed description of the In this proposal, Komatsu is offering 62 machine models across 10 product groups equipment, products, and services that you to Sourcewell members. The individual models are shown on the Sourcewell are offering in your proposal. Contract Billing Rates and List Discounts file in Documents/Pricing and further detail is available in the 01.17.2023 KAC Price List also in the Document section/Pricing. The product groups being offered are: 1) Articulated Dump Trucks 6) Hydraulic Excavators 2) Compact Excavators 7) Hybrid Hydraulic Excavators 3) Crawler Dozers 8) IMC Hydraulic Excavators 4) IMC Crawler Dozers 9) Wheel Loaders 5) Motor Graders 10) Forestry Machines — Processor and Log Loader Each of these products meet EPA emissions regulations and are supported by the Komatsu America distribution network across North America. The IMC dozers and excavators feature Komatsu's Intelligent Machine Control, which integrate 3D GPS technology into the machine. This technology is supported by a dedicated network of over Technology Solutions Experts (TSEs) located throughout North America. 58 of the models offered in this proposal come with Komatsu Care, a 3 Year / 2,000-hour complimentary maintenance program. This program also includes a complimentary DPF exchange program for applicable models. The 4 compact excavator models (PC30-PC55) do not have Komatsu Care coverage. Komtrax telematics will be provided free of charge to Sourcewell members. Through Komatsu Financial there will be a competitive lease option available for Sourcewell members, subject to credit approval. See Additional Documents-KF7 Amendment 3-Municipal Lease Program. 70 Within this RFP category there may be There are no subcategories for the listed products and services. subcategories of solutions. List subcategory titles that best describe your products and services. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 14B: Depth and Breadth of Offered Equipment Products and Services Indicate below if the listed types or classes of equipment, products, and services are offered within your proposal. Provide additional comments in the text box provided, as necessary. Line Item Category or Type Offered * Comments 71 Wheeled, tracked, and backhoe loaders r: Yes KAC offers 7 wheel loader models - C No 126 HP - 353HP and operating weights from 25,827 lbs. to 81,020 lbs. KAC does not offer tracked and backhoe loaders as part of this proposal 72 Motor Graders r: Yes 2 models offered - 218 HP and C No operating weights of 37,346 - 38,250 lbs. 73 Wheeled and tracked excavators Yes Tracked Excavators - 23 models from r No 24HP through 359 HP and operating weight from 6,505 lbs. to 110,220 lbs. Within this catagory, we offer 2 Hybrid EX, 5 Intelligent machines and 6 compact/Utility excavators. In addition, KAC is offering 2 Forestry model excavators - PC230E-11 Processor and PC290LL-11 Log Loader 74 Bulldozers, compactors, scapers, articulated and r: Yes 26 crawler dozer models from-89HP- rigid haulers r No 354 HP. Operating weight from 19,842 lbs. to 89,300lbs. Within this catagory, we are offering 10 Intelligent models. There is also 2 Articulated Trucks offered from 332HP to 473 HP with load capacity from 30.9 tons - 44.1 tons. 75 Cranes r Yes KAC will not offer any cranes in this r: No proposal. 76 Accessories or attachments for the offering in #71- r: Yes Both Komatsu manufactured and Allied 75 above No attachments are offered to Sourcewell members for category #71-74 above. Please see the 01.17.2023 KAC Price List files in Documents/Pricing for attachments offered by Komatsu America Corp. for category # 71 - 74. 77 Technology or services for the offering in #71-75 r: Yes Intelligent Machine Control is offered above r No on both Crawler Dozers and Excavators - please refer to Documents/Pricing-01.17.2023 KAC Price List/Sourcewell Contract Billing Rates & List Discounts for specific models and options. There is also 2 Hybrid model excavators that offer an Electrically Driven Swing Motor powered by a Komatsu Ultra Capacitor that provides high swing power and speed with a 20% fuel savings over the standard excavators. Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Table 14C: Required Offering of Equipment Indicate below if the proposer's proposal includes at least one (1) of the following listed types or classes of equipment. Provide additional comments in the text box provided, as necessary. Line Item Category or Type Offered * Comments 78 Wheel loader with published net horsepower (HP) r Yes WA500-8 at 353 HP. Refer to of at least 300 HP C No Documents/Pricing-01.17.2023 KAC Price List for machine specs 79 Wheeled or tracked excavator with a published net r Yes PC490LC-11 at 359 HP. Refer to horsepower (HP) of at least 150 HP r No Documents/Pricing-01.17.2023 KAC Price List for machine specs 80 Motor Grader with a published maximum operating r Yes GD655-7 with an operating weight of weight of at least 30,000 lbs. r No 38,250 lbs. Refer to Documents/Pricing-01.17.2023 KAC Price List for machine specs 81 Rough terrain, all terrain, crawler, floating, lattice, or r Yes KAC does not offer a crane in this telescopic crane with a published maximum lifting r No proposal capacity of at least 300 tons and a published maximum boom length of at least 150 feet Table 15: Exceptions to Terms, Conditions, or Specifications Form Line Item 82. NOTICE: To identify any exception, or to request any modification, to the Sourcewell template Contract terms, conditions, or specifications, a Proposer must submit the exception or requested modification on the Exceptions to Terms, Conditions, or Specifications Form immediately below. The contract section, the specific text addressed by the exception or requested modification, and the proposed modification must be identified in detail. Proposer's exceptions and proposed modifications are subject to review and approval of Sourcewell and will not automatically be included in the contract. Contract Section Term, Condition, or Specification Exception or Proposed Modification Section 18C ADDITIONAL INSURED ENDORSEMENT AND PRIMARY AND NON-CONTRIBUTORY INSURANCE CLAUSE Komatsu carries a general umbrella liability policy applicable to normal business operations. We are able to issue a specific policy in a participating entity's name on a case by case basis, when needed or requested. Documents Ensure your submission document(s) conforms to the following: 1. Documents in PDF format are preferred. Documents in Word, Excel, or compatible formats may also be provided. 2. Documents should NOT have a security password, as Sourcewell may not be able to open the file. It is your sole responsibility to ensure that the uploaded document(s) are not either defective, corrupted or blank and that the documents can be opened and viewed by Sourcewell. 3. Sourcewell may reject any response where any document(s) cannot be opened and viewed by Sourcewell. 4. If you need to upload more than one (1) document for a single item, you should combine the documents into one zipped file. If the zipped file contains more than one (1) document, ensure each document is named, in relation to the submission format item responding to. For example, if responding to the Marketing Plan category save the document as "Marketing Plan." Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B • Pricing - 01-17-2023 KAC Price List and Sourcewell Contract Billing Rates and List Discounts.zip - Tuesday January 17, 2023 11:04:27 • Financial Strength and Stability - FY22 YE Statement and 6 months ending 09.30.22.zip - Tuesday January 10, 2023 08:57:23 • Marketing Plan/Samples - Press Release - Sourcewell Annoucement DRAFT 1-15-23.zip - Sunday January 15, 2023 16:35:12 • WMBE/MBE/SBE or Related Certificates (optional) • Warranty Information - Warranties and program details.zip - Friday January 06, 2023 10:47:16 • Standard Transaction Document Samples - Standard Documents Komastu.zip - Monday January 16, 2023 13:08:09 • Upload Additional Document - Additional Documents Komatsu.zip - Monday January 16, 2023 13:07:46 Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B Addenda, Terms and Conditions PROPOSER AFFIDAVIT AND ASSURANCE OF COMPLIANCE I certify that I am the authorized representative of the Proposer submitting the foregoing Proposal with the legal authority to bind the Proposer to this Affidavit and Assurance of Compliance: 1. The Proposer is submitting this Proposal under its full and complete legal name, and the Proposer legally exists in good standing in the jurisdiction of its residence. 2. The Proposer warrants that the information provided in this Proposal is true, correct, and reliable for purposes of evaluation for contract award. 3. The Proposer, including any person assisting with the creation of this Proposal, has arrived at this Proposal independently and the Proposal has been created without colluding with any other person, company, or parties that have or will submit a proposal under this solicitation; and the Proposal has in all respects been created fairly without any fraud or dishonesty. The Proposer has not directly or indirectly entered into any agreement or arrangement with any person or business in an effort to influence any part of this solicitation or operations of a resulting contract; and the Proposer has not taken any action in restraint of free trade or competitiveness in connection with this solicitation. Additionally, if Proposer has worked with a consultant on the Proposal, the consultant (an individual or a company) has not assisted any other entity that has submitted or will submit a proposal for this solicitation. 4. To the best of its knowledge and belief, and except as otherwise disclosed in the Proposal, there are no relevant facts or circumstances which could give rise to an organizational conflict of interest. An organizational conflict of interest exists when a vendor has an unfair competitive advantage or the vendor's objectivity in performing the contract is, or might be, impaired. 5. The contents of the Proposal have not been communicated by the Proposer or its employees or agents to any person not an employee or legally authorized agent of the Proposer and will not be communicated to any such persons prior to Due Date of this solicitation. 6. If awarded a contract, the Proposer will provide to Sourcewell Participating Entities the equipment, products, and services in accordance with the terms, conditions, and scope of a resulting contract. 7. The Proposer possesses, or will possess before delivering any equipment, products, or services, all applicable licenses or certifications necessary to deliver such equipment, products, or services under any resulting contract. 8. The Proposer agrees to deliver equipment, products, and services through valid contracts, purchase orders, or means that are acceptable to Sourcewell Members. Unless otherwise agreed to, the Proposer must provide only new and first -quality products and related services to Sourcewell Members under an awarded Contract. 9. The Proposer will comply with all applicable provisions of federal, state, and local laws, regulations, rules, and orders. 10. The Proposer understands that Sourcewell will reject RFP proposals that are marked "confidential" (or "nonpublic," etc.), either substantially or in their entirety. Under Minnesota Statutes Section 13.591, subdivision 4, all proposals are considered nonpublic data until the evaluation is complete and a Contract is awarded. At that point, proposals become public data. Minnesota Statutes Section 13.37 permits only certain narrowly defined data to be considered a "trade secret," and thus nonpublic data under Minnesota's Data Practices Act. 11. Proposer its employees, agents, and subcontractors are not: 1. Included on the "Specially Designated Nationals and Blocked Persons" list maintained by the Office of Foreign Assets Control of the United States Department of the Treasury found at: https://www.treasury_gov/ofac/downloads/sdnlist.pdf; 2. Included on the government -wide exclusions lists in the United States System for Award Management found at: https://sam.gov/SAM/; or 3. Presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from programs operated Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. DocuSign Envelope ID: AE8B6591-A557-4337-A9A4-089738A6B67B by the State of Minnesota; the United States federal government or the Canadian government, as applicable; or any Participating Entity. Vendor certifies and warrants that neither it nor its principals have been convicted of a criminal offense related to the subject matter of this solicitation. r By checking this box I acknowledge that I am bound by the terms of the Proposer's Affidavit, have the legal authority to submit this Proposal on behalf of the Proposer, and that this electronic acknowledgment has the same legal effect, validity, and enforceability as if I had hand signed the Proposal. This signature will not be denied such legal effect, validity, or enforceability solely because an electronic signature or electronic record was used in its formation. - Robert Richens, Director National Accounts, Komatsu America The Proposer declares that there is an actual or potential Conflict of Interest relating to the preparation of its submission, and/or the Proposer foresees an actual or potential Conflict of Interest in performing the contractual obligations contemplated in the bid. r• Yes r. No The Bidder acknowledges and agrees that the addendum/addenda below form part of the Bid Document. Check the box in the column "I have reviewed this addendum" below to acknowledge each of the addenda. I have reviewed the File Name below addendum and pages attachments (if applicable) Addend um_5_Heavy_Construction_Equipment_RFP_011723 Tue January 10 2023 08:47 AM Addendum_4_Heavy_Construction_Equipment_RFP_011723 Fri January 6 2023 09:51 AM Addend um_3_Heavy_Construction_Equipment_RFP_011723 Thu December 29 2022 12:33 PM Addend um_2_Heavy_Construction_ Equipment_RFP_011723 Wed December 21 2022 01:49 PM Addendum_1_Heavy_Construction_Equipment_RFP 011723 Thu December 15 2022 09:27 AM r r F r r Bid Number: RFP 011723 Vendor Name: Komatsu America Corp. Exhibit C - Conflict of Interest Questionnaire CONFLICT OF INTEREST QUESTIONNAIRE FORM CIQ For vendor doing business with local governmental entity This questionnaire reflects changes made to the law by H.B. 23, 84th Leg., Regular Session. OFFICE USE ONLY This questionnaire is being filed in accordance with Chapter 176, Local Government Code, by a vendor who Date Received has a business relationship as defined by Section 176.001(1-a) with a local governmental entity and the vendor meets requirements under Section 176.006(a). By law this questionnaire must be filed with the records administrator of the local governmental entity not later than the 7th business day after the date the vendor becomes aware of facts that require the statement to be filed. See Section 176.006(a-1), Local Government Code. A vendor commits an offense if the vendor knowingly violates Section 176.006, Local Government Code. An offense under this section is a misdemeanor. .1J Name of vendor who has a business relationship with local governmental entity. 2 ❑ Check this box if you are filing an update to a previously filed questionnaire. (The law requires that you file an updated completed questionnaire with the appropriate filing authority not later than the 7th business day after the date on which you became aware that the originally filed questionnaire was incomplete or inaccurate.) 3 Name of local government officer about whom the information is being disclosed. Name of Officer 4j Describe each employment or other business relationship with the local government officer, or a family member of the officer, as described by Section 176.003(a)(2)(A). Also describe any family relationship with the local government officer. Complete subparts A and B for each employment or business relationship described. Attach additional pages to this Form CIQ as necessary. A. Is the local government officer or a family member of the officer receiving or likely to receive taxable income, other than investment income, from the vendor? Yes F-1 No B. Is the vendor receiving or likely to receive taxable income, other than investment income, from or at the direction of the local government officer or a family member of the officer AND the taxable income is not received from the local governmental entity? Yes F-1 No -2.1 Describe each employment or business relationship that the vendor named in Section 1 maintains with a corporation or other business entity with respect to which the local government officer serves as an officer or director, or holds an ownership interest of one percent or more. 6 ❑ Check this box if the vendor has given the local government officer or a family member of the officer one or more gifts as described in Section 176.003(a)(2)(B), excluding gifts described in Section 176.003(a-1). 7 Signature of vendor doing business with the governmental entity Date Form provided by Texas Ethics Commission www.ethics.state.tx.us Revised 1/1/2021 CONFLICT OF INTEREST QUESTIONNAIRE For vendor doing business with local governmental entity A complete copy of Chapter 176 of the Local Government Code may be found at http://www.statutes.legis.state.tx.us/ Docs/LG/htm/LG.176.htm. For easy reference, below are some of the sections cited on this form. Local Government Code § 176.001(1-a): "Business relationship" means a connection between two or more parties based on commercial activity of one of the parties. The term does not include a connection based on: (A) a transaction that is subject to rate or fee regulation by a federal, state, or local governmental entity or an agency of a federal, state, or local governmental entity; (B) a transaction conducted at a price and subject to terms available to the public; or (C) a purchase or lease of goods or services from a person that is chartered by a state or federal agency and that is subject to regular examination by, and reporting to, that agency. Local Government Code § 176.003(a)(2)(A) and (B): (a) A local government officer shall file a conflicts disclosure statement with respect to a vendor if: (2) the vendor: (A) has an employment or other business relationship with the local government officer or a family member of the officer that results in the officer or family member receiving taxable income, other than investment income, that exceeds $2,500 during the 12-month period preceding the date that the officer becomes aware that (i) a contract between the local governmental entity and vendor has been executed; or (ii) the local governmental entity is considering entering into a contract with the vendor; (B) has given to the local government officer or a family member of the officer one or more gifts that have an aggregate value of more than $100 in the 12-month period preceding the date the officer becomes aware that: (i) a contract between the local governmental entity and vendor has been executed; or (ii) the local governmental entity is considering entering into a contract with the vendor. Local Government Code § 176.006(a) and (a-1) (a) Avendor shall file a completed conflict of interest questionnaire if the vendor has a business relationship with a local governmental entity and: (1) has an employment or other business relationship with a local government officer of that local governmental entity, or a family member of the officer, described by Section 176.003(a)(2)(A); (2) has given a local government officer of that local governmental entity, or a family member of the officer, one or more gifts with the aggregate value specified by Section 176.003(a)(2)(B), excluding any gift described by Section 176.003(a-1); or (3) has a family relationship with a local government officer of that local governmental entity. (a-1) The completed conflict of interest questionnaire must be filed with the appropriate records administrator not later than the seventh business day after the later of: (1) the date that the vendor: (A) begins discussions or negotiations to enter into a contract with the local governmental entity; or (B) submits to the local governmental entity an application, response to a request for proposals or bids, correspondence, or another writing related to a potential contract with the local governmental entity; or (2) the date the vendor becomes aware: (A) of an employment or other business relationship with a local government officer, or a family member of the officer, described by Subsection (a); (B) that the vendor has given one or more gifts described by Subsection (a); or (C) of a family relationship with a local government officer. Form provided by Texas Ethics Commission www.ethics.state.tx.us Revised 1/1/2021 General Discussion Gertifcations Attachments Authors & Reviewers F Routing Summary (This is a read only summary view of the M&C) City of Fort Worth, Texas Mayor and Council Communication DATE: 05/12/26 LOG NAME: 13P BLANKET COOPERATIVE AUTHORIZATION FLEET ACQUISITIONS CAH CONSENT: Consent (ALL) Authorize Execution of Non -Exclusive Agreements with Multiple Vendors for the Purchase of Fleet Vehicles and Off -Road and Other Motorized Equipment Up to the Amount of Available Funding Capital Projects Across Multiple Funds Citywide Using Cooperative Contracts and Interlocal Agreements for One Year for the Financial Management Services Department I It is recommended that the City Council authorize execution of non-exclusive agreements with multiple vendors for the purchase of fleet vehicles, off -road and other motorized equipment up to the amount of available funding in capital projects across multiple funds citywide using cooperative contracts and interlocal agreements for one year for the Financial Management Services Department, DISCUSSION: The purpose of this Mayor & Council Communication (M&C) is to authorize a one-year blanket approval to execute non-exclusive cooperative purchasing agreements and interlocal agreements with multiple vendors. The City routinely receives a high volume of vehicle and equipment purchase requests within tight timeframes, often compounded by limited vendor availability. Absent a blanket authorization, these concurrent demands can create procurement bottlenecks and result in delays of acquiring critical vehicles and equipment. Establishing a blanket M&C enables the Financial Management Services Department to respond more efficiently to departmental needs, secure available inventory in a timely manner, and mitigate the risk of a new backlog that could disrupt daily operations across City departments. Approval of this M&C will enable the Fleet Stirke Force (FSF) to continue supporting the daily needs of the City while ensuring the timely acquisition of essential vehicles and equipment needed to support operations. IThe following vendors and cooperative purchasing agencies are actively utilized to procure vehicles and equipment. These partnerships Ihave been instrumental in advancing procurement efforts and sustaining critical operations across the City. VENDOR COOPERATIVE AGENCY Siddons Martin Emergency Group, LLC BuyBoard, Houston -Galveston Area Council (HGAC) RDO Equipment Sourcewell Versalift Sourcewell Lake Country Chevrolet The Interlocal Purchasing System (TIPS) North Texas Trailers, LLC BuyBoard Silsbee Ford The Interlocal Purchasing System (TIPS) Associated Supply Company (ASCO) BuyBoard Zimmerer Kubota Sourcewell Interstate Trailers, LLC BuyBoard American Golf Cars BuyBoard Professional Turf Products BuyBoard Silsbee Toyota The Interlocal Purchasing System (TIPS) Kirby Smith Machinery BuyBoard Ditch Witch Sourcewell Munson Boats G neral Services Administration (GSA) Industrial Power, LLC Houston -Galveston Area Council (HGAC) Sam Packs Five Star Ford, LTD BuyBoard Core and Main, LP dba Green Equipment Co. Sourcewell Donalson CDJR The Interlocal Purchasing System (TIPS) MHC Kenworth Sourcewell COOPERATIVE PURCHASE - State law provides that local government purchasing an item under a cooperative purchasing agreement satisfies state laws requiring that the local government seek competitive bids for purchase of the item. ADMINISTRATIVE CHANGE ORDERS - An administrative change order or increase may be made by the City Manager or his designee up to the amount allowed by relevant Law and the Fort Worth City Code and does not require specific City Council approval as long as sufficient funds have been appropriated. SMALL BUSINESS — A Small Business goal has not been assigned to this contract because a waiver has been approved by the Property Management Department's Assistant City Manager, on behalf of the Financial Management Services Department, in accordance with the City's Small Business Ordinance. FUNDING - Currently, there is $41,568,886.00 in the City's budget in capital projects across multiple funds citywide for the purpose of funding fleet acquisitions. Prior to each purchase agreement or contract being executed, staff will confirm that funding is available for that purchase and is appropriated for that purpose. All existing contracts shall be amended or terminated to release encumbered funds to ensure that the City is able to make purchases with the vendors that have needed items available for purchase on a rolling basis. No guarantee has been or will be made to any vendor regarding minimum purchases. This agreement will serve ALL COUNCIL DISTRICTS. FISCAL INFORMATION / CERTIFICATION: The Director of Finance certifies that funds are available in the current capital budgets, as previously appropriated, in the Vehicle and Equip Replacement Fund, W&S Capital Projects Fund, Stormwater Capital Projects Fund, Municipal Airport Capital Proj Fund, Solid Waste Capital Projects Fund, CCPD Capital Projects Fund, Fleet Capital Projects Fund, Environmental Prot Cap Proj Fund, Tax Notes Series 2023 Fund, Tax Notes Series 2024 Fund, Justice Asset Forfeitu Capital Fund, Certificate of Obligation 2023 Fund and Tax Notes 2025B Fund for various projects to support the approval of the above recommendation for the purchase of vehicles and equipment. Prior to any expenditures being incurred, the Financial Management Services Department has the responsibility to validate the availability of funds. Submitted for City Manager's Office by: Reginald Zeno 8517 Valerie Washington 6192 FORT WORTH. City Secretary's Office Contract Routing & Transmittal Slip Contractor's Name: Kirby Smith Machinery, Inc. Subject of the Agreement: Provide heavy construction equipment and related equipment for City fleet. M&C Approved by the Council? * Yes 0 No ❑ If so, the M&C must be attached to the contract. Is this an Amendment to an Existing contract? Yes ❑ No 0 If so, provide the original contract number and the amendment number. Is the Contract "Permanent"? *Yes ❑ No 0 If unsure, see backpage for permanent contract listing. Is this entire contract Confidential? *Yes ❑ No 0 If only specific information is Confidential, please list what information is Confidential and the page it is located. Effective Date: If different from the approval date. Expiration Date: May 12, 2027 If applicable. Is a 1295 Form required? * Yes 0 No ❑ *If so, please ensure it is attached to the approving M&C or attached to the contract. Project Number: If applicable. n/a *Did you include a Text field on the contract to add the City Secretary Contract (CSC) number? Yes 0 No ❑ Contracts need to be routed for CSO processing in the followingorder: rder: 1. Katherine Cenicola (Approver) 2. Jannette S. Goodall (Signer) 3. Allison Tidwell (Form Filler) *Indicates the information is required and if the information is not provided, the contract will be returned to the department.