Loading...
HomeMy WebLinkAbout065801 - General - Contract - Bond Electric Co., Inc.CSC No. 65801 FORT WORTH CITY OF FORT WORTH COOPERATIVE PURCHASE AGREEMENT This Cooperative Purchase Agreement ("Agreement") is entered into by and between Bond Equipment Co, Inc. ("Vendor") and the City of Fort Worth, ("City"), a Texas home rule municipality. The Cooperative Purchase Agreement includes the following documents which shall be construed in the order of precedence in which they are listed: OFFICIAL RECORD 1. This Cooperative Purchase Agreement; CITY SECRETARY 2. Exhibit A — Seller's Pricing; 3. Exhibit B — Cooperative Agency Contract (BuyBoard 723-23); and FT. WORTH, TX 4. Exhibit C — Conflict of Interest Questionnaire Exhibits A, B, and C, which are attached hereto and incorporated herein, are made a part of this Agreement for all purposes. In the event of any conflict between the terms and conditions of Exhibits A, B, or C and the terms and conditions set forth in the body of this Agreement, the terms and conditions of this Agreement control. City shall pay Vendor in accordance with the fee schedule in Exhibit A, including any future quotes, and in accordance with the provisions of this Agreement. Total annual payment made under this non-exclusive Agreement may be an amount up to Forty -One Million Dollars and Zero Cents ($41,000,000.00). The Vendor acknowledges that this is a non-exclusive agreement and there is no guarantee of any specific amount of purchase. Further, Vendor recognizes that the amount stated above is the total amount of funds available, collectively, for any Vendor that enters into an agreement with the City under the relevant M&C or cooperative agreement and that once the full amount has been exhausted, whether individually or collectively, funds have therefore been exhausted under this Agreement as well. The Parties will engage in multiple transactions to purchase vehicles under this Agreement. For each purchase made pursuant to this Agreement, Vendor must supply a quote for the subject vehicles, and the quote must conform with the then -current pricing under the underlying cooperative agreement. If the City accepts the quote and places an order for the vehicle(s), that quote shall be considered an addendum to this agreement but is not required to be filed in the City records. The Parties will maintain all quotes for the three-year Audit period included herein. The term of this Agreement is effective beginning on the date signed by the Assistant City Manager below ("Effective Date") and shall expire no later than May 12, 2027 ("Expiration Date"), unless terminated earlier in accordance with this Agreement. Vendor agrees that City shall, until the expiration of three (3) years after final payment under this Agreement, or the final conclusion of any audit commenced during the said three years, have access to and the right to examine at reasonable times any directly pertinent books, documents, papers and records, including, but not limited to, all electronic records, of Vendor relating directly to this Agreement at no additional cost to City. Vendor agrees that City shall have access during normal working hours to all necessary Vendor facilities and shall be provided adequate and appropriate work space in order to conduct audits in compliance with the provisions of this section. City shall give Vendor reasonable advance notice of intended audits. Notices required pursuant to the provisions of this Agreement shall be conclusively determined to have been delivered when (1) hand -delivered to the other party, its agents, employees, servants or representatives, (2) delivered by facsimile with electronic confirmation of the transmission, or (3) received by the other party by United States Mail, registered, return receipt requested, addressed as follows: To CITY: City of Fort Worth Attn: Valerie Washington, Assistant City Manager 100 Fort Worth Trail, Fort Worth, TX 76102 With copy to Fort Worth City Attorney's Office at same address To VENDOR: Bond Equipment Co, Inc. 2946 Irving Blvd Dallas, TX 75247-6211 Facsimile: N/A City is a government entity under the laws of the State of Texas and all documents held or maintained by City are subject to disclosure under the Texas Public Information Act. To the extent the Agreement requires that City maintain records in violation of the Act, City hereby objects to such provisions, and such provisions are hereby deleted from the Agreement and shall have no force or effect. In the event there is a request for information marked Confidential or Proprietary, City shall promptly notify Vendor. It will be the responsibility of Vendor to submit reasons objecting to disclosure. A determination on whether such reasons are sufficient will not be decided by City, but by the Office of the Attorney General of the State of Texas or by a court of competent jurisdiction. The Agreement and the rights and obligations of the parties hereto shall be governed by and construed in accordance with the laws of the United States and state of Texas, exclusive of conflicts of laws provisions. Venue for any suit brought under the Agreement shall be in a court of competent jurisdiction in Tarrant County, Texas. To the extent the Agreement is required to be governed by any state law other than Texas or venue in Tarrant County, City objects to such terms and any such terms are hereby deleted from the Agreement and shall have no force or effect. Nothing herein constitutes a waiver of City's sovereign immunity. To the extent the Agreement requires City to waive its rights or immunities as a government entity; such provisions are hereby deleted and shall have no force or effect. To the extent the Agreement, in any way, limits the liability of Vendor or requires City to indemnify or hold Vendor or any third party harmless from damages of any kind or character, City objects to these terms and any such terms are hereby deleted from the Agreement and shall have no force or effect. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that in accordance with Chapter 2271 of the Texas Government Code, the City is prohibited from entering into a contract with a company for goods or services unless the contract contains a written verification from the company that it: (1) does not boycott Israel; and (2) will not boycott Israel during the term of the contract. The terms "boycott Israel" and "company" has the meanings ascribed to those terms in Chapter 2271 of the Texas Government Code. By signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not boycott Israel; and (2) will not boycott Israel during the term of the Agreement. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that in accordance with Chapter 2276 of the Texas Government Code, the City is prohibited from entering into a contract for goods or services that has a value of $100,000 or more that is to be paid wholly or partly from public funds of the City with a company with 10 or more full-time employees unless the contract contains a written verification from the Vendor that it: (1) does not boycott energy companies; and (2) will not boycott energy companies during the term of this Agreement. To the extent that Chapter 2276 of the Government Code is applicable to this Agreement, by signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not boycott energy companies; and (2) will not boycott energy companies during the term of this Agreement. If Vendor has fewer than 10 employees or this Agreement is for less than $100,000, this section does not apply. Vendor acknowledges that except as otherwise provided by Chapter 2274 of the Texas Government Code, the City is prohibited from entering into a contract for goods or services that has a value of $100,000 or more that is to be paid wholly or partly from public funds of the City with a company with 10 or more full-time employees unless the contract contains a written verification from the Vendor that it: (1) does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association; and (2) will not discriminate during the term of the contract against a firearm entity or firearm trade association. To the extent that Chapter 2274 of the Government Code is applicable to this Agreement, by signing this Agreement, Vendor certifies that Vendor's signature provides written verification to the City that Vendor: (1) does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association; and (2) will not discriminate against a firearm entity or firearm trade association during the term of this Agreement. The undersigned represents and warrants that he or she has the power and authority to execute this Agreement and bind the respective Vendor. CITY OF FORT WORTH: VOLW4i -/l. Valerie Washington (Sep 9, 2026 10:00:09 CDT) Name: Valerie Washington Title: Assistant City Manager Date: 09/09/2026 APPROVAL RECOMMENDED: By: Reginald Zeno (Sep 9, 2026 09:38:48 CDT) Name: Reginald Zeno Title: Chief Financial Officer/Director ATTEST: aQn opa*$tee ooe#� cpnan� os�d By: Name: Jannette Goodall Title: City Secretary VENDOR: Bond Equipment Co, Inc By: Date Name: James A. Bond Title: President 9/8/2026 CONTRACT COMPLIANCE MANAGER: By signing I acknowledge that I am the person responsible for the monitoring and administration of this contract, including ensuring all performance and reporting requirements. .7acte- 4rre Janie Arreola (Sep 9, 2026 09:05:28 CDT) Name: Janie Arreola Title: Senior Buyer APPROVED AS TO FORM AND LEGALITY: By: Name: Jordan P. Alvarez Title: Assistant City Attorney CONTRACT AUTHORIZATION: M&C: 26-0393 Date: May 12, 2026 1295 Form: 2026-1502523 OFFICIAL RECORD CITY SECRETARY FT. WORTH, TX TEXAS LOCAL GOVERNMENT PURCHASING COOPERATIVE BUYBOARD PRODUCT PURCHASING BASED ON CONTRACT Customer City of Fort Worth 8/26/2026 Product Description LH Drive Battle Motors LET2 6X4 Diesel Ship to Labrie Yuma A. Base Price in Bid/Proposal Number 723-23 $189,356.00 B. Published Options *itemize each item below) L9-350 0 Duff lock controls w buzzer 391 Block Heater 384 DCDL Tandem 1118 Remote coolant recovery and fill 489 Batt -Disconnect to switch 185 Ag Neutral AG 551 Battery box 3 950 CCA 310 HMX 460 3342 LH DLX Seat 662 D46-170 1350 Adjustable seat shock 168 Tow pins 143 Crew Cab 3876 Disable radio in reverse 134 Air horn 798 Leach 25YD Rear loader 144299 Ag Neutral AG 551 Freight to Labrie 7574 25 yard Leach Subtotal column 1 11618 Subtotal column 2 154707 Pubished Options added to Base Price (Subtotal of Columnl Column 2) $166,325 C. Subtotal of A+ B $355,681 D. Unpublished Options (Itemize each item below. Not to exceed +25%. of Unpublished) Lb Def tank mount 244 Surcharge 975 Heated DV2 valve 182 Payment after delivery 8000 315/80 Rear wheels 3325 Total Column 1 3751 Total Column 2 8975 Unpublished Options added to Base Price (subtotal of Column I + 2) 12726 E. Contract Price Adjustment (if any explain) F. Total of C+D + E(Not including Buyboard Fee) $368,407 G. Quantity Ordered (Units x F) I # of Units 368,407 H. Buyboard Fee 400 400 I. Non -Equipment Charges & Credits (ie Ext. Warranty, Trade In, Cost of Factory Trips etc.) *Cummins Ext Warrant, 3005 3005 ***Per truck *AllisonExtWarranty 1360 1360 ***Pertruck Subtotal non equipment changes J. TOTAL PURCHASE PRICE INCLUDING (G +H +I) 373,172 Bond Equipment Company Inc. Andy Bond 2946 Irving Blvd 214-637-0760 Dallas, TX 75247 October 9, 2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • info@buyboard.com • buyboard.com Sent Via Email: andyb@bondequipment.com Andy Bond Bond Equipment Company 2946 Irving Blvd Dallas, TX 75247 Welcome to BuyBoard! Re: Notice of The Local Government Purchasing Cooperative ContractAward; Proposal Invitation No. 723- 23, Medium and Heavy -Duty Trucks, Parts, and Maintenance Repair Service Congratulations, The Local Government Purchasing Cooperative (Cooperative) has awarded your company a BuyBoard® contract based on the above -referenced Proposal Invitation. The contract is effective for an initial one-year term of December 1, 2023, through November 30, 2024, and may be subject to two possible one-year renewals. Please refer to the Proposal Invitation for the contract documents, including the General Terms and Conditions of the Contract. To review the items your company has been awarded, please review Proposal Tabulation No. 723-23 at: www.buyboard.com/vendor. Only items marked as awarded to your company are included in this contract award, and only those awarded items may be sold through the BuyBoard contract. All sales must comply with the contract terms and must be at or below the awarded pricing as set forth in the General Terms and Conditions. The contract will be posted on the BuyBoard website as an online electronic catalog(s). You are reminded that, in accordance with the General Terms and Conditions, all purchase orders must be processed through the BuyBoard. Except as expressly authorized in writing by the Cooperative's administrator, you are not authorized to process a purchase order received directly from a Cooperative member that has not been processed through the BuyBoard or provided to the Cooperative. If you receive a purchase order directly from a Cooperative member that you have reason to believe has not been received by the Cooperative or processed through the BuyBoard, you must promptly forward a copy of the purchase order by email to info@buyboard.com. A list of Cooperative members is available on the buyboard.com website. Once the contract is active, the BuyBoard vendor relations staff will be contacting you to assist with the resources available and to provide any support you may need as an awarded BuyBoard vendor. On behalf of the Cooperative, we appreciate your interest in the Cooperative and we are looking forward to your participation in the program. If you have any questions, feel free contact me at 800-695-2919. Sincerely, Ava Benford, Cooperative Procurement Manager Texas Association of School Boards, Inc., Administrator for The Local Government Purchasing Cooperative v.02.01.2021 Endorsed by A TASA! T1 T �Q t:X Board® National Purchasing Cooperative October 9, 2023 Sent Via Email: andyb@bondequipment.com Andy Bond Bond Equipment Company 2946 Irving Blvd Dallas, TX 75247 Welcome to BuyBoard! Re: Notice of National Purchasing Cooperative Award; Proposal Invitation No. 723-23, Medium and Heavy Duty Trucks, Parts, and Maintenance Repair Service Congratulations, The National Purchasing Cooperative (National Cooperative) has awarded your company a BuyBoard® contract based on the above -referenced Proposal Invitation. The contract is effective for an initial one-year term of December 1, 2023, through November 30, 2024, and may be subject to two possible one-year renewals. Please refer to the Proposal Invitation for the contract documents, including the National Purchasing Cooperative Vendor Award Agreement and General Terms and Conditions of the Contract. To review the items your company has been awarded, please review Proposal Tabulation No. 723-23 at www.buyboard.com/vendor. Only items marked as awarded to your company are included in this contract award, and only those awarded items may be sold through the BuyBoard contract. All sales must comply with the contract terms and must be at or below the awarded pricing as set forth in the General Terms and Conditions. The contract will be posted on the BuyBoard website as an online electronic catalog(s). You are reminded that, in accordance with the General Terms and Conditions, all purchase orders from National Cooperative members must be processed through the BuyBoard. Except as expressly authorized in writing by the Cooperative's administrator, you are not authorized to process a purchase order received directly from a National Cooperative member that has not been processed through the BuyBoard or provided to the Cooperative. If you receive a purchase order directly from a National Cooperative member that you have reason to believe has not been received by the National Cooperative or processed through the BuyBoard, you must promptly forward a copy of the purchase order by e-mail to info@buyboard.com A list of National Cooperative members is available on the buyboard.com website. Once the contract is active, the BuyBoard vendor relations staff will be contacting you to assist with resources available and provide any support you may need as an awarded BuyBoard vendor. On behalf of the National Cooperative, we are looking forward to your participation in the program. If you have any questions, feel free to contact me at 800-695-2919. Sincerely, Ava Benford, Cooperative Procurement Manager Texas Association of School Boards, Inc., Procurement Administrator for the National Purchasing Cooperative v.02.01.2021 UI' P.0. Box 400, Austin, Texas 78767-0400 800.695.2919 • buyboard.com P.O. Box 400, Austin, Texas 78767 800.695.2919 • bIds@buyboard.com• buyboard.com PROPOSER'S ACCEPTANCE AND AGREEMENT Proposal Invitation Name Medium and Heavy -Duty Trucks, Parts, and Maintenance Repair Service Proposal Due Date/Opening Date and Time August 24, 2023, at 4:00 PM Location of Proposal Opening Proposal Invitation Number Texas Association of School Boards, Inc. 723-23 BuyBoard Department 12007 Research Blvd. Austin, TX 78759 Contract Term December 1, 2023, through November 30, 2024, Anticipated Cooperative Board Meeting Date with two possible one-year renewals. October 2023 By signature below, the undersigned acknowledges and agrees that you are authorized to submit this Proposal, including making all acknowledgements, consents, and certifications herein, on behalf of Proposer and, to the best of your knowledge, the information provided is true, accurate, and complete. Bond Equipment Co. Inc. Name of Proposing Company 2946 Irving Blvd Street Address Dallas TX 76039 City, State, Zip 214-637-0760 Telephone Number of Authorized Company Official 214-637-4731 Fax Number of Authorized Company Official 8/22/2023 Date Signature of Authorized Company Official James A Bond Printed Name of Authorized Company Official President Position or Title of Authorized Company Official 75-0929505 Federal ID Number Page 11 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com PROPOSAL FORMS PART 1: COMPLIANCE FORMS INSTRUCTIONS: Proposer must review and complete all forms in this Proposal Forms Part 1: ■ Proposal Acknowledgements ■ Felony Conviction Disclosure ■ Resident/Nonresident Certification ■ Debarment Certification ■ Vendor Employment Certification ■ No Boycott Verification ■ No Excluded Nation or Foreign Terrorist Organization Certification ■ Historically Underutilized Business Certification ■ Acknowledgement of BuyBoard Technical Requirements ■ Construction -Related Goods and Services Affirmation ■ Deviation and Compliance ■ Vendor Consent for Name Brand Use ■ Confidential/Proprietary Information ■ EDGAR Vendor Certification ■ Compliance Forms Signature Page An authorized representative of Proposer mustinitiaiin the bottom right corner of each pagewhere indicated and complete and sign the Compliance Forms Signature Page. Proposer's failure to fully complete, initial, and sign forms as required may result in your Proposal being rejected as non -responsive. The proposing company ("you" or "your") hereby acknowledges and agrees as follows: 1. You have carefully examined and understand all information and documentation associated with this Proposal Invitation, including the Instructions to Proposers, General Information, General Terms and Conditions, attachments/forms, appendices, item specifications, and line items (collectively "Requirements'); 2. By your response ("Proposal") to this Proposal Invitation, you propose to supply the products or services submitted at the pricing quoted in your Proposal and in strict compliance with the Requirements, unless specific deviations or exceptions are noted in the Proposal; 3. By your Proposal, you acknowledge and certify all items set forth in the General Terms and Conditions, Section B.12 (Certifications), including all non -collusion certifications and certifications regarding legal, ethical, and other matters set forth therein. 4. Any and all deviations and exceptions to the Requirements have been noted in your Proposal on the required form and no others will be claimed; Initial: Page 12 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com 5. If the Cooperative accepts any part of your Proposal and awards you a Contract, you will furnish all awarded products or services at the pricing quoted and in strict compliance with the Requirements (unless specific deviations or exceptions are noted on the required form and accepted by the Cooperative), including without limitation the Requirements related to: a. conducting business with Cooperative members, including offering pricing to members that is the best you offer compared to similarly situated customers in similar circumstances; b. payment of a service fee in the amount specified and as provided for in this Proposal Invitation; c. the possible award of a piggy -back contract by the National Purchasing Cooperative or nonprofit entity, in which event you will offer the awarded products and services in accordance with the Requirements; and d. submitting price sheets or catalogs in the proper format as required by the Cooperative as a prerequisite to activation of your Contract; 6. You have clearly identified on the included form any information in your Proposal that you believe to be confidential or proprietary or that you do not consider to be public information subject to public disclosure under the Texas Public Information Act or similar public information law; 7. The individual submitting this Proposal is duly authorized to enter into the contractual relationship represented by this Proposal Invitation on your behalf and bind you to the Requirements, and such individual (and any individual signing a form or Proposal document) is authorized and has the requisite knowledge to provide the information and make the representations and certifications required in the Requirements; 8. You have carefully reviewed your Proposal, and certify that all information provided is true, complete, and accurate to the best of your knowledge, and you authorize the Cooperative to take such action as it deems appropriate to verify such information; and 9. Any misstatement, falsification, or omission in your Proposal, whenever or however discovered, will be grounds for disqualifying you from consideration for a contract award under this Proposal Invitation, termination of a contract award, or any other remedy or action provided for in the General Terms and Conditions or by law. FELONY CONVICTION DISCLOSURE Subsection (a) of Section 44.034 of the Texas Education Code (Notification of Criminal History of Contractor) states: "A person or business entity that enters into a contract with a school district must give advance notice to the district if the person or an owner or operator has been convicted of a felony. The notice must include a general description of the conduct resulting in the conviction of a felony." Section 44.034 further states in Subsection (b): "A school district may terminate a contract with a person or business entity if the district determines that the person or business entity failed to give notice as required by Subsection (a) or misrepresented the conduct resulting in the conviction. The district must compensate the person or business entity for services performed before the termination of the contract." Please check (V) one of the following: ❑ My company is a publicly -held corporation. (Advance notice requirement does not apply to publicly -held corporation.) ❑✓ My company is not owned or operated by anyone who has been convicted of a felony. ❑ My company is owned/operated by the following individual(s) who has/have been convicted of a felony: Name of Felon(s): Details of Conviction(s): Initial: -4U Page 13 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com RESIDENT/NONRESIDENT CERTIFICATION Chapter 2252, Subchapter A, of the Texas Government Code establishes certain requirements applicable to proposers who are not Texas residents. Under the statute, a "resident" proposer is a person whose principal place of business is in Texas, including a contractor whose ultimate parent company or majority owner has its principal place of business in Texas. A "nonresident" proposer is a person who is not a Texas resident. Please indicate the status of your company as a "resident" proposer or a "nonresident" proposer under these definitions. Please check (V) one of the following: ❑✓ I certify that my company is a Resident Proposer. ❑ I certify that my company is a Nonresident Proposer. If your company is a Nonresident Proposer, you must provide the following information for your resident state (the state in which your company's principal place of business is located): A. Company Name Address City State Zip Code Does your resident state require a proposer whose principal place of business is in Texas to under -price proposers whose resident state is the same as yours by a prescribed amount or percentage to receive a comparable contract? ❑ Yes ❑ No What is the prescribed amount or percentage? $ or DEBARMENT CERTIFICATION By signature on the Compliance Forms Signature Page, I certify that neither my company nor an owner or principal of my company has been debarred, suspended or otherwise made ineligible for participation in Federal Assistance programs under Executive Order 12549, "Debarment and Suspension," as described in the Federal Register and Rules and Regulations. Neither my company nor an owner or principal of my company is currently listed on the government -wide exclusions in SAM, debarred, suspended, or otherwise excluded by agencies or declared ineligible under any statutory or regulatory authority. My company agrees to immediately notify the Cooperative and all Cooperative members with pending purchases or seeking to purchase from my company if my company or an owner or principal is later listed on the government -wide exclusions in SAM, or is debarred, suspended, or otherwise excluded by agencies or declared ineligible under any statutory or regulatory authority. VENDOR EMPLOYMENT CERTIFICATION Section 44.031(b) of the Texas Education Code establishes certain criteria that a school district must consider when determining to whom to award a contract. Among the criteria for certain contracts is whether the vendor or the vendor's ultimate parent or majority owner (i) has its principal place of business in Texas; or (ii) employs at least 500 people in Texas. If neither your company nor the ultimate parent company or majority owner has its principal place of business in Texas, does your company, ultimate parent company, or majority owner employ at least 500 people in Texas? Please check (i/) one of the following: ❑ Yes ® No Initial: 423 Page 14 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com NO BOYCOTT VERIFICATION A Texas governmental entity may not enter into a contract with a value of $100,000 or more that is to be paid wholly or partly from public funds with a company (excluding a sole proprietorship) that has 10 or more full-time employees for goods or services unless the contract contains a written verification from the company that it: (1) does not boycott Israel and will not boycott Israel during the term of the contract (TEX. Gov'T CODE Ch. 2271), (2) does not boycott energy companies and will not boycott energy companies during the term of the contract (TEX. Gov'T CODE Ch. 2274 effective September 1, 2021), and (3) does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of the contract against a firearm entity or firearm trade association (TEX. Gov'T CODE Ch. 2274 effective September 1, 2021). Accordingly, this certification form is included to the extent required by law. "Boycott Israel" means refusing to deal with, terminating business activities with, or otherwise taking any action that is intended to penalize, inflict economic harm on, or limit commercial relations specifically with Israel, or with a person or entity doing business in Israel or in an Israeli -controlled territory, but does not include an action made for ordinary business purposes. TEx. Gov'T CODE §808.001(1). "Boycott energy company" means, without an ordinary business purpose, refusing to deal with, terminating business activities with, or otherwise taking any action that is intended to penalize, inflict economic harm on, or limit commercial relations with a company because the company: (A) engages in the exploration, production, utilization, transportation, sale, or manufacturing of fossil fuel -based energy and does not commit or pledge to meet environmental standards beyond applicable federal and state law; or (B) does business with a company described by Paragraph (A). TEX. Gov'T CODE §809.001(1) (effective September 1, 2021). "Discriminate against a firearm entity or firearm trade association" means, (A) with respect to the entity or association, to: (i) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (ii) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (iii) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; and (B) does not include: (i) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (ii) a company's refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship: (aa) to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency; or (bb) for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity's or association's status as a firearm entity or firearm trade association. TEX. Gov'T CODE §2274.001(3) (effective September 1, 2021). By signature on the Compliance Forms Signature Page, to the extent applicable, I certify and verify that Vendor does not boycott Israel, boycott energy companies, or discriminate against a firearm entity or firearm trade association and will not do so during the term of any contract awarded under this Proposal Invitation, that this certification is true, complete and accurate, and that I am authorized by my company to make this certification. Initial: 45 Page 15 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com NO EXCLUDED NATION OR FOREIGN TERRORIST ORGANIZATION CERTIFICATION Chapter 2252 of the Texas Government Code provides that a Texas governmental entity may not enter into a contract with a company engaged in active business operations with Sudan, Iran, or a foreign terrorist organization — specifically, any company identified on a list prepared and maintained by the Texas Comptroller under Texas Government Code §§806.051, 807.051, or 2252.153. (A company that the U.S. Government affirmatively declares to be excluded from its federal sanctions regime relating to Sudan, Iran, or any federal sanctions regime relating to a foreign terrorist organization is not subject to the contract prohibition.) By signature on the Compliance Forms Signature Page, I certify and verify that Vendor is not on the Texas Comptroller's list identified above; that this certification is true, complete and accurate; and that I am authorized by my company to make this certification. HISTORICALLY UNDERUTILIZED BUSINESS CERTIFICATION A Proposer that has been certified as a Historically Underutilized Business (also known as a Minority/Women Business Enterprise or "MWBE" and all referred to in this form as a "HUB") is encouraged to indicate its HUB certification status when responding to this Proposal Invitation. The BuyBoard website will indicate HUB certifications for awarded Vendors that properly indicate and document their HUB certification on this form. (P/ease check (v/) all that apply) ❑ I certify that my company has been certified as a HUB in the following categories: ❑ Minority Owned Business ❑ Women Owned Business ❑ Service -Disabled Veteran Owned Business (veteran defined by 38 U.S.C. §101(2), who has a service -connected disability as defined by 38 U.S.C. § 101(16), and who has a disability rating of 20% or more as determined by the U. S. Department of Veterans Affairs or Department of Defense) Certification Number: Name of Certifying Agency: ❑ My company has NOT been certified as a HUB. ACKNOWLEDGEMENT OF BUYBOARD TECHNICAL REQUIREMENTS Vendor shall review the BuyBoard Technical Requirements included in this Proposal Invitation. By signature on the Compliance Forms Signature Page, the undersigned affirms that Proposer has obtained a copy of the BuyBoard Technical Requirements, has read and understands the requirements, and certifies that Vendor is able to meet and will comply with those requirements except as follows: [List and explain BuyBoard Technical Requirements, if any, to which your company cannot or will not comply.] Note: In accordance with the General Terms and Conditions of the Contract, to the extent Vendor is awarded a Contract under this Proposal Invitation but is unable or unwilling to meet the applicable BuyBoard Technical Requirements, the information available on the BuyBoard for Vendor's awarded products or services may be limited, potentially placing Vendor at a disadvantage and impacting the ability of Cooperative members to search, find, review, and purchase Vendor's awarded products and services on the BuyBoard website. Further, to the extent Vendor has acknowledged ability to meet and comply with the BuyBoard Technical Requirements, any subsequent failure or refusal by Vendor to promptly provide information upon request to the Cooperative administrator in accordance with those technical requirements may be deemed an ev,j1t of default under the Contract. Initial: Page 16 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com CONSTRUCTION -RELATED GOODS AND SERVICES AFFIRMATION The Cooperative issued the BuyBoard Procurement and Construction -Related Goods and Services Advisory for Texas Members ("Advisory"), which provides information specifically relevant to the procurement of construction -related goods and services by Texas Cooperative members. The Advisory, available at buyboard.com/Vendor/Resources.aspx, provides an overview of certain legal requirements that are potentially relevant to a Cooperative member's procurement of construction or construction -related goods and services, including those for projects that may involve or require architecture, engineering or independent testing services. A copy of the Advisory can also be provided upon request. Because many BuyBoard contracts include goods or installation services that might be considered construction -related, Proposer must make this Construction Related -Goods and Services Affirmation regardless of type of goods or services associated with this Proposal Invitation. A contract awarded under this Proposal Invitation covers only the specific goods and/or services awarded by the Cooperative. As explained in the Advisory ("Advisory"), Texas law prohibits the procurement of architecture or engineering services through a purchasing cooperative. This Proposal Invitation and any Contract awarded thereunder does not include such services. Architecture or engineering services must be procured by a Cooperative member separately, in accordance with the Professional Services Procurement Act (Chapter 2254 of the Texas Government Code) and other applicable law and local policy. By signature on the Compliance Forms Signature Page, Proposer affirms that Proposer has obtained a copy of the Advisory, has read and understands the Advisory, and is authorized by Proposer to make this affirmation. If Proposer sells construction -related goods or services to a Cooperative member under a Contract awarded under this Proposal Invitation, Proposer will comply with the Advisory and applicable legal requirements, make a good faith effort to make its Cooperative member customers or potential Cooperative member customers aware of such requirements, and provide a Cooperative member with a copy of the Advisory before accepting the member's Purchase Order or other agreement for construction - related goods or services. Initial: '123 Page 17 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com DEVIATION AND COMPLIANCE If your company intends to deviate from the General Terms and Conditions, Proposal Specifications or other requirements associated with this Proposal Invitation, you MUST list all such deviations on this form, and provide complete and detailed information regarding the deviations on this form or an attachment to this form. Prior to completing this form, Vendor shall review the General Terms and Conditions section B.4 (Deviations from Item Specifications and General Terms and Conditions). Please note that, as provided in section B.4, certain provisions of the General Terms and Conditions are NOT subject to deviation, and certain deviations will be deemed rejected without further action by the Cooperative. Any attempted deviation, whether directly or indirectly, to provisions identified in this Proposal Invitation as not subject to deviation shall be deemed rejected by the Cooperative and, unless otherwise withdrawn by Vendor, may result in Vendor's Proposal being rejected in its entirety. The Cooperative will consider any deviations in its contract award decision and reserves the right to accept or reject a proposal based upon any submitted deviation. In the absence of any deviation identified and described in accordance with the above, your company must fully comply with the General Terms and Conditions, Proposal Specifications and all other requirements associated with this Proposal Invitation if awarded a Contract under this Proposal Invitation. A deviation will not be effective unless accepted by the Cooperative. The Cooperative, by and through the Cooperative administrator, may, in its sole discretion, seek clarification from and/or communicate with Proposer(s) regarding any submitted deviation, consistent with general procurement principles of fair competition. The Cooperative reserves the right to accept or reject a Proposal based upon any submitted deviation. Please check (i/) one of the following: ❑✓ NO; Deviations ❑ Yes; Deviations List and fully explain any deviations you are submitting: Initial: -4a Page 18 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bIds@buyboard.com• buyboard.com VENDOR CONSENT FOR NAME BRAND USE BuyBoard members seeking to make purchases using a Contract awarded under this Proposal Invitation may view information regarding awarded Vendors, including but not limited to product catalogs, pricelists, pricing, and Proposals, through the BuyBoard website. To improve and enhance the experience of BuyBoard members seeking to procure goods and services under the Contract utilizing the BuyBoard website, any Vendor logo, product images, and similar brand and trademark information provided by Vendor for purposes of the Contract ("Vendor Information") may be posted on the BuyBoard website. You acknowledge that, by submitting your Proposal, unless you specifically opt out below, you consent to use of your company's Vendor Information on the BuyBoard website if awarded a Contract. You further acknowledge that whether, where, and when to include the Vendor Information on the BuyBoard website shall be at the sole discretion of the BuyBoard Administrator. Vendor retains, however, the right of general quality control over the BuyBoard Administrator's authorized display of proprietary Vendor Information. Neither the BuyBoard nor its administrator will be responsible for the use or distribution of Vendor Information by BuyBoard members or any other third party using the BuyBoard website. This Vendor Consent shall be effective for the full term of the Contract, including renewals, unless Vendor provides a signed, written notice revoking consent to contractadmin@buyboard.com. BuyBoard shall have up to thirty days from the date of receipt of a termination or revocation of a Vendor Consent to remove Vendor information from the BuyBoard website. This Vendor Consent is subject to the Terms and Conditions of the Contract, including, but not limited to, those terms pertaining to Disclaimer of Warranty and Limitation of Liability, Indemnification, and Intellectual Property Infringement. Vendor logo files must be submitted in one of the formats set forth in the BuyBoard Technical Requirements. Proposers are requested to submit this information with Vendor's Proposal. (This consent shall not authorize use of your company's Vendor Information by BuyBoard if your company is not awarded a Contract.) OPT OUT: If your company wishes to opt out of the Vendor Consent for Name Brand Use, you must check the opt out box below. DO NOTselect this box unless your company is opting out of this Vendor Consent for Name Brand Use. ❑ By checking this box, Vendor hereby declines to provide consent for use of Vendor Information (as defined herein) on the BuyBoard website. By opting out, Vendor acknowledges and agrees that, if Vendor is awarded a Contract under this Proposal Invitation, information available on the BuyBoard for Vendor's awarded products or services may be limited, potentially placing Vendor at a disadvantage and impacting the ability of Cooperative members to search, find, review, and purchase Vendor's awarded products and services on the BuyBoard website. Initial: Page 19 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com CONFIDENTIAL/PROPRIETARY INFORMATION A. Public Disclosure Laws All Proposals, forms, documentation, catalogs, pricelists, or other materials submitted by Vendor to the Cooperative in response to this Proposal Invitation, may be subject to the disclosure requirements of the Texas Public Information Act (Texas Government Code chapter 552.001, et. seq.) or similar disclosure law. Proposer must clearly identify on this form any information in its Proposal (including forms, documentation, or other materials submitted with the Proposal) that Proposer considers proprietary or confidential. If Proposer fails to properly identify the information, the Cooperative shall have no obligation to notify Vendor or seek protection of such information from public disclosure should a member of the public or other third party request access to the information under the Texas Public Information Act or similar disclosure law. When required by the Texas Public Information Act or other disclosure law, Proposer may be notified of any third -party request for information in a Proposal that Proposer has identified in this form as proprietary or confidential. Does your Proposal (including forms, documentation, catalogs, pricelists, or other materials submitted with the Proposal) contain information which Vendor considers proprietary or confidential? Please check (V) one of the following: i: NO, I certify that none of the information included with this Proposal is considered confidential or proprietary. YES, I certify that this Proposal contains information considered confidential or proprietary and all such information is specifically identified on this form. If you responded "YES", you must clearly identify below the specific information you consider confidential or proprietary. List each page number, form number, or other information sufficient to make the information readily identifiable. The Cooperative and Cooperative administrator shall not be responsible for a Proposer's failure to clearly identify information considered confidential or proprietary. Further, by submitting a Proposal, Proposer acknowledges that the Cooperative and Cooperative administrator will disclose information when required by law, even if such information has been identified herein as information Vendor considers confidential or proprietary. Confidential / Proprietary Information: (Attach additional sheets if needed.) Initial: Page 20 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com B. Copyright Information Does your Proposal (including forms, documentation, pricelists, catalogs, or other materials submitted with the Proposal) contain copyright information? Please check (1/) one of the following: x❑ NO, Proposal (including forms, documentation, pricelists, catalogs, or other materials submitted with the Proposal) does not contain copyright information. ❑ YES, Proposal (including forms, documentation, pricelists, catalogs, or other materials submitted with the Proposal) does contain copyright information. If you responded"YES", clearly identify below the specific documents or pages containing copyright information. Copyright Information: (Attach additional sheets if needed.) C. Consent to Release Confidential/Proprietary/Copyright Information to BuyBoard Members BuyBoard members (Cooperative and nonprofit members) seeking to make purchases through the BuyBoard may wish to view information included in the Proposals of awarded Vendors. If you identified information on this form as confidential, proprietary, or subject to copyright, and you are awarded a BuyBoard contract, your acceptance of the BuyBoard contract award constitutes your consent to the disclosure of such information to BuyBoard members, including posting of such information on the secure BuyBoard website for members. Note: Neither the Cooperative nor Cooperative administrator will be responsible for the use or distribution of information by BuyBoard members or any other party. D. Consent to Release Proposal Tabulation Notwithstanding anything in this Confidential/Proprietary Information form to the contrary, by submitting a Proposal, Vendor consents and agrees that, upon Contract award, the Cooperative may publicly release, including posting on the public BuyBoard website, a copy of the proposal tabulation and award information for the Contract including Vendor name; proposed catalog/pricelist name(s); proposed percentage discount(s), hourly labor rate(s), or other specified pricing; and Vendor award or non -award information. Initial: �a Page 21 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com EDGAR VENDOR CERTIFICATION (2 CFR Part 200 and Appendix II) When a Cooperative member seeks to procure goods and services using funds under a federal grant or contract, specific federal laws, regulations, and requirements may apply in addition to those under state law. This includes, but is not limited to, the procurement standards of the Uniform Administrative Requirements, Cost Principles and Audit Requirements for Federal Awards, 2 CFR 200 (sometimes referred to as the "Uniform Guidance" or new "EDGAR"). All Vendors submitting a Proposal must complete this EDGAR Certification Form regarding Vendor's willingness and ability to comply with certain requirements which may be applicable to specific Cooperative member purchases using federal grant funds. Completed forms will be made available to Cooperative members for their use while considering their purchasing options when using federal grant funds. Cooperative members may also require Vendors to enter into ancillary agreements, in addition to the terms and conditions of the BuyBoard contract, to address the member's specific contractual needs, including contract requirements for a procurement using federal grants or contracts. For each of the items below, Vendor should certify Vendor's agreement and ability to comply, where applicable, by having Vendor's authorized representative check the applicable boxes, initial each page, and sign the Compliance Forms Signature Page. If you fail to complete any item in this form, the Cooperative will consider and may list the Vendor's response on the BuyBoard as "NO," the Vendor is unable or unwilling to comply. A "NO" response to any of the items may, if applicable, impact the ability of a Cooperative member to purchase from the Vendor using federal funds. 1. Vendor Violation or Breach of Contract Terms: Contracts for more than the simplified acquisition threshold, which is the inflation adjusted amount determined by the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) as authorized by 41 USC 1908, must address administrative, contractual, or legal remedies in instances where contractors violate or breach contract terms, and provide for such sanctions and penalties as appropriate. Provisions regarding Vendor default are included in the BuyBoard General Terms and Conditions, including Section E.18, Remedies for Default and Termination of Contract. Any Contract award will be subject to such BuyBoard General Terms and Conditions, as well as any additional terms and conditions in any Purchase Order or Cooperative member ancillary contract agreed upon by Vendor and the Cooperative member which must be consistent with and protect the Cooperative member at least to the same extent as the BuyBoard Terms and Conditions. The remedies under the Contract are in addition to any other remedies that may be available under law or in equity. By submitting a Proposal, you agree to these Vendor violation and breach of contract terms. e YES, I agree. ❑ NO, I do not agree. 2. Termination for Cause or Convenience: For any Cooperative member purchase or contract in excess of $10,000 made using federal funds, you agree that the following term and condition shall apply: The Cooperative member may terminate or cancel any Purchase Order under this Contract at any time, with or without cause, by providing seven (7) business days advance written notice to the Vendor. If this Agreement is terminated in accordance with this Paragraph, the Cooperative member shall only be required to pay Vendor for goods or services delivered to the Cooperative member prior to the termination and not otherwise returned in accordance with Vendor's return policy. If the Cooperative member has paid Vendor for goods or services not yet provided as of the date of termination, Vendor shall immediately refund such payment(s). If an alternate provision for termination of a Cooperative member purchase for cause and convenience, including the manner by which it will be effected and the basis for settlement, is included in the Cooperative member's Purchase Order or ancillary agreement agreed to by the Vendor, the Cooperative member's provision shall control. e YES, I agree. ❑ NO, I do not agree. Initial: Page 22 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com 3. Equal Employment Opportunity: Except as otherwise provided under 41 CFR Part 60, all Cooperative member purchases or contracts that meet the definition of "federally assisted construction contract" in 41 CFR Part 60-1.3 shall be deemed to include the equal opportunity clause provided under 41 CFR 60-1.4(b), in accordance with Executive Order 11246, "Equal Employment Opportunity" (30 FR 12319, 12935, 3 CFR Part, 1964-1965 Comp., p. 339), as amended by Executive Order 11375, "Amending Executive Order 11246 Relating to Equal Employment Opportunity," and implementing regulations at 41 CFR Part 60, "Office of Federal Contract Compliance Programs, Equal Employment Opportunity, Department of Labor." The equal opportunity clause provided under 41 CFR 60-1.4(b) is hereby incorporated by reference. Vendor agrees that such provision applies to any Cooperative member purchase or contract that meets the definition of "federally assisted construction contract" in 41 CFR Part 60-1.3 and Vendor agrees that it shall comply with such provision. L`I YES, I agree. ❑ NO, I do not agree. 4. Davis -Bacon Act: When required by Federal program legislation, Vendor agrees that, for all Cooperative member prime construction contracts/purchases in excess of $2,000, Vendor shall comply with the Davis -Bacon Act (40 USC 3141-3144, and 3146- 3148) as supplemented by Department of Labor regulations (29 CFR Part 5, "Labor Standards Provisions Applicable to Contracts Covering Federally Financed and Assisted Construction"). In accordance with the statute, Vendor is required to pay wages to laborers and mechanics at a rate not less than the prevailing wages specified in a wage determinate made by the Secretary of Labor. In addition, Vendor shall pay wages not less than once a week. Current prevailing wage determinations issued by the Department of Labor are available at beta.sam.gov. Vendor agrees that, for any purchase to which this requirement applies, the award of the purchase to the Vendor is conditioned upon Vendor's acceptance of the wage determination. Vendor further agrees that it shall also comply with the Copeland "Anti -Kickback" Act (40 USC 3145), as supplemented by Department of Labor regulations (29 CFR Part 3, "Contractors and Subcontractors on Public Building or Public Work Financed in Whole or in Part by Loans or Grants from the United States"). The Act provides that each contractor or subrecipient must be prohibited from inducing, by any means, any person employed in the construction, completion, or repair of public work, to give up any part of the compensation to which he or she is otherwise entitled. L`1 YES, I agree. ❑ NO, I do not agree. 5. Contract Work Hours and Safety Standards Act: Where applicable, for all Cooperative member contracts or purchases in excess of $100,000 that involve the employment of mechanics or laborers, Vendor agrees to comply with 40 USC 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 USC 3702 of the Act, Vendor is required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 USC 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence. e YES, I agree. ❑ NO, I do not agree. Initial: '4a Page 23 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com 6. Right to Inventions Made Under a Contract or Agreement: If the Cooperative member's Federal award meets the definition of "funding agreement" under 37 CFR 401.2(a) and the recipient or subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the substitution of parties, assignment or performance or experimental, developmental, or research work under that"funding agreement," the recipient or subrecipient must comply with the requirements of 37 CFR Part 401, "Rights to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements," and any implementing regulations issued by the awarding agency. Vendor agrees to comply with the above requirements when applicable. e YES, I agree. El NO, I do not agree. 7. Clean Air Act and Federal Water Pollution Control Act: Clean Air Act (42 USC 7401-7671q.) and the Federal Water Pollution Control Act (33 USC 1251-1387), as amended — Contracts and subgrants of amounts in excess of $150,000 must contain a provision that requires the non -Federal award to agree to comply with all applicable standards, orders, or regulations issued pursuant to the Clean Air Act (42 USC 7401- 7671q.) and the Federal Water Pollution Control Act, as amended (33 USC 1251-1387). Violations must be reported to the Federal awarding agency and the Regional Office of the Environmental Protection Agency (EPA). When required, Vendor agrees to comply with all applicable standards, orders, or regulations issued pursuant to the Clean Air Act and the Federal Water Pollution Control Act. 11 YES, I agree. El NO, I do not agree. 8. Debarment and Suspension: Debarment and Suspension (Executive Orders 12549 and 12689) — A contract award (see 2 CFR 180.220) must not be made to parties listed on the government -wide exclusions in the System for Award Management (SAM), in accordance with the OMB guidelines at 2 CFR 180 that implement Executive Orders 12549 (3 CFR Part 1966 Comp. p. 189) and 12689 (3 CFR Part 1989 Comp. p. 235), "Debarment and Suspension." SAM Exclusions contains the names of parties debarred, suspended, or otherwise excluded by agencies, as well as parties declared ineligible under statutory or regulatory authority other than Executive Order 12549. Vendor certifies that Vendor is not currently listed on the government -wide exclusions in SAM, is not debarred, suspended, or otherwise excluded by agencies or declared ineligible under statutory or regulatory authority other than Executive Order 12549. Vendor further agrees to immediately notify the Cooperative and all Cooperative members with pending purchases or seeking to purchase from Vendor if Vendor is later listed on the government -wide exclusions in SAM, or is debarred, suspended, or otherwise excluded by agencies or declared ineligible under statutory or regulatory authority other than Executive Order 12549. 1 YES, I agree. El NO, I do not agree. 9. Byrd Anti -Lobbying Amendment: Byrd Anti -Lobbying Amendment (31 USC 1352) - Vendors that apply or bid for an award exceeding $100,000 must file the required certification. Each tier certifies to the tier above that it will not and has not used Federal appropriated funds to pay any person or organization for influencing or attempting to influence an officer or employee of any agency, a member of Congress, officer or employee of Congress, or an employee of a member of Congress in connection with obtaining any Federal contract, grant or any other award covered by 31 USC 1352. Each tier must also disclose any lobbying with non - Federal funds that takes place in connection with obtaining any Federal award. Such disclosures are forwarded from tier to tier up to the non -Federal award. As applicable, Vendor agrees to file all certifications and disclosures required by, and otherwise comply with, the Byrd Anti -Lobbying Amendment (31 USC 1352). e YES, I agree. ❑ NO, I do not agree. Initial: Page 24 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com 10. Procurement of Recovered Materials: For Cooperative member purchases utilizing Federal funds, Vendor agrees to comply with Section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act where applicable and provide such information and certifications as a Cooperative member may require to confirm estimates and otherwise comply. The requirements of Section 6002 include procuring only items designated in guidelines of the Environmental Protection Agency (EPA) at 40 CFR Part 247 that contain the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; procuring solid waste management services in a manner that maximizes energy and resource recovery, and establishing an affirmative procurement program for procurement of recovered materials identified in the EPA guidelines. L`1 YES, I agree. ❑ NO, I do not agree. 11. Domestic Preferences for Procurements: Where appropriate and consistent with law, 2 CFR §200.322 contains certain considerations for domestic preferences for procurements which may be applicable to Cooperative members using federal funds. When required by a Cooperative member, Vendor agrees to provide such information or certification as may reasonably be requested by the Cooperative member regarding Vendor's products, including whether goods, products, or materials are produced in the United States. e YES, I agree. ❑ NO, I do not agree. 12. Prohibition on Certain Telecommunications and Video Surveillance Services or Equipment 2 CFR §200.216 prohibits expending federal loan or grant funds to procure or obtain certain telecommunications and video surveillance services or equipment. To the extent applicable and when required by a Cooperative member, Vendor agrees to provide such information or certification as may reasonably be requested by the Cooperative member to confirm whether any telecommunications or video surveillance services or equipment provided by Vendor is covered equipment or covered services under 2 CFR §200.216. e YES, I agree. El NO, I do not agree. 13. Profit as a Separate Element of Price: For purchases using federal funds in excess of the Simplified Acquisition Threshold, a Cooperative member may be required to negotiate profit as a separate element of the price. See, 2 CFR 200.324(b). When required by a Cooperative member, Vendor agrees to provide information and negotiate with the Cooperative member regarding profit as a separate element of the price for a particular purchase. However, Vendor agrees that the total price, including profit, charged by Vendor to the Cooperative member shall not exceed the awarded pricing, including any applicable discount, under Vendor's Cooperative Contract. 11 YES, I agree. El NO, I do not agree. 14. General Compliance and Cooperation with Cooperative Members: In addition to the foregoing specific requirements, Vendor agrees, in accepting any Purchase Order from a Cooperative member, it shall make a good faith effort to work with Cooperative members to provide such information and to satisfy such requirements as may apply to a particular Cooperative member purchase or purchases including, but not limited to, applicable recordkeeping and record retention requirements. L`1 YES, I agree. El NO, I do not agree. Initial: Page 25 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bIds@buyboard.com• buyboard.com COMPLIANCE FORMS SIGNATURE PAGE By initialing pages and by signature below, I certify that I have reviewed the following forms; that the information provided therein is true, complete, and accurate; and that I am authorized by my company to make all certifications, consents, acknowledgements, and agreements contained herein: ■ Proposal Acknowledgements ■ Felony Conviction Disclosure ■ Debarment Certification ■ Resident/Nonresident Certification ■ Vendor Employment Certification ■ No Boycott Verification ■ No Excluded Nation or Foreign Terrorist Organization Certification ■ Historically Underutilized Business Certification ■ Construction -Related Goods and Services Affirmation ■ Acknowledgement of BuyBoard Technical Requirements ■ Deviation and Compliance ■ Vendor Consent for Name Brand Use ■ Confidential/Proprietary Information ■ EDGAR Vendor Certification Bond Equipment Co Inc Company Name Signature of Authorized Company Official James A Bond President Printed Name and Title 8/22/23 Date Page 26 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com PROPOSAL FORMS PART 2: VEN INFORMATION FORMS DOR INSTRUCTIONS: Proposer must completely and accurately provide all information requested in the following Vendor Information Forms or your Proposal may be rejected as non -responsive: ■ Vendor Business Name ■ Vendor Contact Information ■ Federal and State/Purchasing Cooperative Experience ■ Governmental References ■ Company Profile ■ Texas Regional Service Designation ■ State Service Designation • National Purchasing Cooperative Vendor Award Agreement (Vendors serving outside Texas only) • Local/Authorized Seller Listings • Manufacturer Dealer Designation • Proposal Invitation Questionnaire • Vendor Request to Self -Report BuyBoard Purchases (optional) To the extent any information requested is not applicable to your company, you must so indicate on the form. VEN BUSINESS NAME By submitting a Proposal, Vendor is seeking to enter into a legal contract with the Cooperative. As such, Vendor must be an individual or legal business entity capable of entering into a binding contract. Name of Proposing Company: Bond Equipment Co. Inc. (List the legal name of the company seeking to contract with the Cooperative. Do NOT list an assumed name, dba, aka, etc. here. Such information may be provided below. If you are submitting a joint proposal with another entity to provide the same proposed goods or services, each submitting entity should complete a separate vendor information form. Separately operating legal business entities, even if affiliated entities, which propose to provide goods or services separately must submit their own Proposals.) Please check (i/) one of the following: Type of Business: El Individual/Sole Proprietor e Corporation El Limited Liability Company El Partnership El Other (Specify: State of Incorporation (if applicable): Texa$ Federal Employer Identification Number: 75-0929505 (Vendor must include a completed IRS W-9 form with their Proposal) Name by which Vendor, if awarded, wishes to be identified on the BuyBoard: (Note: If different than the Name of Proposing Company listed above, only valid trade names (dba, aka, etc.) of the Proposing Company may be used and a copy of your Assumed Name Certificate(s), if applicable, must be attached.) Bond Equipment Co. Inc Page 27 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 . bids(a�buyboard.com • buyboard.com VENDOR CONTACT INFORMATION Vendor shall provide the requested Vendor Contact Information in the electronic proposal submission system including contract, purchase order, RFQ, and invoice contacts (or, if submitting a hard copy Proposal, timely request and complete the Vendor Contact Information form in accordance with the Instructions to Proposers). FEDERAL AND STATE/PURCHASING COOPERATIVE EXPERIENCE The Cooperative strives to provide Cooperative members with the best services and products at the best prices available from Vendors with the technical resources and ability to serve Cooperative members. Please respond to the following questions. Provide the dollar value of sales to or through purchasing cooperatives at or based on an established catalog or market price during the previous 12 -month period or the last fiscal year: $ 9,971,913 . (The period of the 12 -month period is 1/1/22 / 12/31/22 ). In the event that a dollar value is not an appropriate measure of the sales, provide and describe your own measure of the sales of the item(s). By submitting a proposal, you agree that, based on your written discounting policies, the discounts you offer the Cooperative are equal to or better than the best price you offer other purchasing cooperatives for the same items under equivalent circumstances. Provide the information requested below for other purchasing cooperatives for which Proposer currently serves, or in the past has served, as an awarded vendor. Rows should be added to accommodate as many purchasing cooperatives as required. 1. Federal General Services Administration �•• • •• 2. T -PASS (State of Texas) 3. OMNIA Partners 4. Sourcewell (NJPA) 5. E&I Cooperative 6. Houston -Galveston Area Council (HGAC) 7. Choice Partners 8. The Interlocal Purchasing System (TIPS) 9. Other ❑✓ MY COMPANY DOES NOT CURRENTLY HAVE ANY OF THE ABOVE OR SIMILAR TYPE CONTRACTS. CURRENT BUYBOARD VENDORS If you are a current BuyBoard vendor in the same contract category as proposed in this Proposal Invitation, indicate the discount for your current BuyBoard contract and the proposed discount in this Proposal. Explain any difference between your current and proposed discounts. Current Discount (%): Published options 10% off list Proposed Discount (%): Published options 10% off list Explanation: Page 28 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 . bids(a�buyboard.com • buyboard.com GOVERNMENTAL REFERENCES For your Proposal to be considered, you must supply a minimum of five (5) individual governmental entity references. The Cooperative may contact any and all references provided as part of the Proposal evaluation. Provide the information requested below, including the existing pricing/discounts you offer each customer. The Cooperative may determine whether pricing/discounts are fair and reasonable by comparing pricing/discounts stated in your Proposal with the pricing/discounts you offer other governmental customers. Attach additional pages if necessary. Quantity/ Entity Name Contact Phone# Email Address Discount Volume i City of Plano Michael Ellis 972-769-4181 mellis@plano.gov 10% z City of Tyler Leroy Sparrow 903-533-0406 (sparrow@tylertx.com 10% 3 City of Garland Garth Sanich 214-460-3216 gsanich@garlandtx.gov 10% 4 City of Cleburne Rodney Collins 817-774-6945 rodney.collins@cleburne.net 10% 5 City of Richardson Ernie Ramos 972-744-4421 Ernest.ramos@cor.gov 10% Do you ever modify your written policies or standard governmental sales practices as identified in the above chart to give better discounts (lower pricing) than indicated? YES ❑ NO 0 If YES, please explain: COMPANY PROFILE Information on awarded Cooperative Contracts is available to Cooperative Members on the BuyBoard website. If your company is awarded a Contract under this Proposal Invitation, please provide a brief company description that you would like to have included with your company profile on the BuyBoard website. Submit your company profile in a separate file, in Word format, with your Proposal. (Note: Vendor is solely responsible for any content provided for inclusion on the BuyBoard website. The Cooperative reserves the right to exclude or remove any content in its sole discretion, with or without prior notice, including but not limited to any content deemed by the Cooperative to be inappropriate, irrelevant to the Contract, inaccurate, or misleading.) Page 29 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 Bond Equipment has been proudly serving the Dallas/Fort Worth area since 1951. We are a certified company specializing in repairs for trucks and trailers. Aside from doing repairs, we are also an authorized dealer for Cummins diesel engines, Warren dump bodies, trailers, and more. Our company also handles commercial truck equipment, parts, and accessories. We are the North Texas Battle Motors Dealer selling new Battle Motors trucks. With more than 50 years of combined experience, our team can help you out with any of your needs. You can trust us to provide you with excellent customer service and get the job done right and on time. P.O. Box 400, Austin, Texas 78767 800.695.2919 • blds@buyboard.com• buyboard.com TEXAS REGIONAL SERVICE DESIGNATION This form must be completed in the electronic proposal submission system (or, if submitting a hard copy Proposal, timely request and complete the form in accordance with the Instructions to Proposers). The Cooperative (referred to as"Texas Cooperative" in this form and in the State Service Designation form) offers vendors the opportunity to service its members throughout the entire State of Texas. In the electronic proposal submission system, you must indicate if you will service Texas Cooperative members statewide or, if you do not plan to service all Texas Cooperative members statewide, you must indicate the specific regions you will service. If you propose to serve different regions for different products or services included in your Proposal, you must complete and submit a separate Texas Regional Service Designation form for each group of products and clearly indicate the products or services to which the designation applies. (Additional forms can be obtained by contacting bids@buyboard.com at least five (5) business days prior to the Proposal Due Date.) By designating a region or regions, you are certifying that you are authorized and willing to provide the proposed products and services in those regions. Designating regions in which you are either unable or unwilling to provide the specified products and services shall be grounds for either rejection of your Proposal or, if awarded, termination of your Contract. Additionally, if you do not plan to service Texas Cooperative members (i.e., if you will service only states other than Texas), you must so indicate on the form in the electronic proposal submission system. Regional Education Service Centers Region and Headquarters 1 Edinburg 2 Corpus Christi 3 Victoria 4 Houston 5 Beaumont 6 Huntsville 7 Kilgore 8 Mount Pleasant 9 Wichita Falls 10 Richardson 11 Fort Worth 12 Waco 13 Austin 14 Abilene 15 San Angelo 16 Amarillo 17 Lubbock 18 Midland 19 El Paso 20 San Antonio Page 30 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com STATE SERVICE DESIGNATION This form must be completed in the electronic proposal submission system (or, if submitting a hard copy Proposal, timely request and complete the in accordance with the Instructions to Proposers). As set forth in the Proposal Invitation, it is the Cooperative's intent that other governmental entities in the United States have the opportunity to purchase goods or services awarded under the Contract, subject to applicable state law, through a piggy- back award or similar agreement through the National Purchasing Cooperative BuyBoard. If you plan to service the entire United States or only specific states, you must complete the State Service Designation information in the electronic proposal submission system. (Note: If you plan to service Texas Cooperative members, be sure that you complete the Texas Regional Service Designation form.) In addition to this form, to be considered for a piggy -back award by the National Purchasing Cooperative, you must have an authorized representative sign the National Purchasing Cooperative Vendor A ward Agreement that follows this page. If you serve different states for different products or services included in your Proposal, you must complete and submit a separate State Service Designation form for each group of products and clearly indicate the products or services to which the designation applies. (Additional forms can be obtained by contacting bids@buyboard.com at least five (5) business days prior to the Proposal Due Date.) By designating a state or states, you are certifying that you are authorized and willing to provide the proposed products and services in those states. Designating states in which you are either unable or unwilling to provide the specified products and services shall be grounds for either rejection of your Proposal or, if awarded, termination of your Contract. • I will service all states in the United States. • I will not service all states in the United States. Alabama Montana Alaska Nebraska Arizona Nevada Arkansas New Hampshire California (Public Contract Code 20118 & 20652) New Jersey Colorado New Mexico Connecticut New York Delaware North Carolina District of Columbia North Dakota Florida Ohio Georgia Oklahoma Hawaii Oregon Idaho Pennsylvania Illinois Rhode Island Indiana South Carolina Iowa South Dakota Kansas Tennessee Kentucky Texas Louisiana Utah Maine Vermont Maryland Virginia Massachusetts Washington Michigan West Virginia Minnesota Wisconsin Mississippi Wyoming Missouri Page 31 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com NATIONAL PURCHASING COOPERATIVE VENDOR AWARD AGREEMENT In accordance with the Terms and Conditions associated with this Proposal Invitation, a contract awarded under this Proposal Invitation may be "piggy -backed" by another governmental entity. The National Purchasing Cooperative is an intergovernmental purchasing cooperative formed by certain school districts outside of Texas to serve its members throughout the United States. If you agree to be considered for a piggy -back award by the National Purchasing Cooperative, you agree to the following terms and agree to serve National Purchasing Cooperative members in the states you have indicated on the State Service Designation form, in your Proposal. By signing this form, Proposer (referred to in this Agreement as "Vendor") agrees as follows: 1. Vendor acknowledges that if The Local Government Purchasing Cooperative ("Texas Cooperative") awards Vendor a contract under this Proposal Invitation ("Underlying Award"), the National Purchasing Cooperative ("National Cooperative") may - but is not required to - "piggy -back" on or re -award all or a portion of that Underlying Award ("Piggy -Back Award"). By signing this National Cooperative Vendor Award Agreement ("Agreement"), Vendor accepts and agrees to be bound by any such Piggy -Back Award as provided for herein. 2. In the event National Cooperative awards Vendor a Piggy -Back Award, the National Cooperative Administrator ("BuyBoard Administrator") will notify Vendor in writing of such Piggy -Back Award, which award shall commence on the effective date stated in the Notice and end on the expiration date of the Underlying Award, subject to annual renewals as authorized in writing by the BuyBoard Administrator. Vendor agrees that no further signature or other action is required of Vendor in order for the Piggy -Back Award and this Agreement to be binding upon Vendor. Vendor further agrees that no interlineations or changes to this Agreement by Vendor will be binding on National Cooperative, unless such changes are agreed to by its BuyBoard Administrator in writing. 3. Vendor agrees that it shall offer its goods and services to National Cooperative members at the same pricing and same general terms and conditions, subject to applicable state laws in the state of purchase, as required by the Underlying Award. However, nothing in this Agreement prevents Vendor from offering National Cooperative members better (i.e., lower) competitive pricing and more favorable terms and conditions than those in the Underlying Award. 4. Vendor hereby agrees and confirms that it will serve those states it has designated on the State Service Designation Form of this Proposal Invitation. Any changes to the states designated on the State Service Designation Form must be approved in writing by the BuyBoard Administrator. 5. Vendor agrees to pay National Cooperative the service fee provided for in the Underlying Award based on the amount of purchases generated from National Cooperative members through the Piggy -Back Award. Vendor shall remit payment to National Cooperative on such schedule as it specifies (which shall not be more often than monthly). Further, upon request, Vendor shall provide National Cooperative with copies of all purchase orders generated from National Cooperative members, vendor invoices, and/or such other documentation regarding those purchase orders as the Cooperative's administrators may require in their reasonable discretion for purposes of reviewing and verifying purchase activity. Vendor further agrees that National Cooperative shall have the right, upon reasonable written notice, to review Vendor's records pertaining to purchases made by National Cooperative members in order to verify the accuracy of service fees. 6. Vendor agrees that the Underlying Award, including its General Terms and Conditions, are adopted by reference to the fullest extent such provisions can reasonably apply to the post-proposal/contract award phase. The rights and responsibilities that would ordinarily inure to the Texas Cooperative pursuant to the Underlying Award shall inure to National Cooperative; and, conversely, the rights and responsibilities that would ordinarily inure to Vendor in the Underlying Award shall inure to Vendor in this Agreement. Vendor recognizes and agrees that Vendor and National Cooperative are the only parties to this Agreement, and that nothing in this Agreement has application to other third parties, including the Texas Cooperative. In the event of conflict between this Agreement and the terms of the Underlying Award, the terms of this Agreement shall control, and then only to the extent necessary to reconcile the conflict. 7. This Agreement shall be governed and construed in accordance with the laws of the State of Texas and venue for any dispute shall lie in the federal district court of Travis County, Texas. Page 32 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 PFBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.conn - buyboard.corn 8. Vendor acknowledges and agrees that the award of a Piggy -Back Award is within the sole discretion of National Cooperative, and that this Agreement does not take effect unless and until National Cooperative awards Vendor a Piggy -Back Award and the BuyBoard Administrator notifies Vendor in writing of such Piggy -Back Award as provided for herein. WHEREFORE, by signing below Vendor agrees to the foregoing and warrants that it has the authority to enter into this Agreement. Bond Equipment Co. Inc 723-23 Name of Vendor Proposal Invitation Number ,� James A Bond Signature of Authorized Company Official Printed Name of Authorized Company Official 8/22/2023 Date Page 33 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.corn - buyboard.corn LOCATION/AUTHORIZED SELLER LISTINGS If you have more than one location/authorized seller that will service a Contract awarded under this Proposal Invitation, please list each location/authorized seller below. If additional sheets are required, please duplicate this form as necessary. NOTE: Awarded Vendors shall remain responsible for all aspects of the Contract, including processing of Purchase Orders, and shall be responsible for the performance of all locations and authorized sellers under and in accordance with the Contract. If you are a product manufacturer and wish to designate Designated Dealers as defined in the General Terms and Conditions to receive Cooperative member Purchase Orders on your behalf, you must complete the Manufacturer Designated Dealer form. . .. Page 34 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@pbuyboard.com • buyboard.com MANUFACTURER DEALER DESIGNATION If Vendor is a manufacturer that sells products through a dealer network and wishes to designate a dealer or multiple dealers ("Designated Dealers") to receive Cooperative member Purchase Orders on Vendor's behalf, you must complete this form for each dealer you wish to designate. Regardless of any Designated Dealers submitted by Vendor, Vendor specifically agrees and acknowledges that any such designations are for Vendor's convenience only and shall not, if Vendor is awarded a Contract, relieve Vendor of any obligations under the Contract, including payment of Cooperative service fees on all Purchase Orders submitted to Vendor or any Designated Dealer. In accordance with the General Terms and Conditions, an awarded Vendor shall remain responsible and liable for all of its obligations under the Contract and the performance of both Vendor and any of Vendor's Designated Dealers under and in accordance with the Contract and remain subject to all remedies for default thereunder, including, but not limited to suspension and termination of Vendor's Contract for nonpayment of service fees. If awarded, Vendor authorizes the Cooperative, in its sole discretion, to list any Vendor Designated Dealers in the BuyBoard system and to receive Purchase Orders directly from Cooperative members on behalf of Vendor. To the extent a Vendor with Designated Dealers receives a Purchase Order directly, it shall be the responsibility of Vendor to appropriately process such Purchase Order in accordance with the Contract, including but not limited to timely forwarding such Purchase Order to a Designated Dealer for processing. The Cooperative reserves the right, in its sole discretion, to refuse addition of, or request removal of, any Designated Dealer, and Vendor agrees to immediately require such Designated Dealer to cease accepting Purchase Orders or otherwise acting on Vendor's behalf under the Contract. Further, the Cooperative administrator shall be authorized to remove or suspend any or all Designated Dealers from the BuyBoard at any time in its sole discretion. If you wish to designate a dealer to service a contract awarded under this Proposal Invitation, please list the Designated Dealer below. If you wish to designate multiple dealers, please duplicate this form as necessary. Designated Dealer Name Designated Dealer Contact Person Designated Dealer Address City Phone Number Email address State Zip Code Fax Number Designated Dealer Tax ID Number* (*attach W-9) Page 35 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com PROPOSAL INVITATION QUESTIONNAIRE The Cooperative will use your responses to the questions below in evaluating your Proposal and technical and financial resources to provide the goods and perform the services ("Work") under the BuyBoard contract contemplated by this Proposal Invitation ("Contract"). Proposers must fully answer each question, numbering your responses to correspond to the questions/numbers below. Proposers must complete below or attach your responses to this questionnaire and submit in one document with your Proposal. You must submit the questionnaire and responses with your Proposal or the Proposal will not be considered. 1. List the number of years Proposer has been in business and former business names (if applicable). Note whether your company is currently for sale or involved in any transaction that would significantly alter its business or result in acquisition by another entity. 72 years in business. Incorporated in 1956. Bond Equipment is not currently for sale or in any transaction that would alter business. 2. Describe the resources Proposer has to manage staff and successfully perform the Work contemplated under this Contract. State the number and summarize the experience of company personnel who may be utilized for the Work, including those who will be available to Cooperative members for assistance with project development, technical issues, and product selection for Work associated with this Contract. Andy Bond 42 years of experience President of Bond Equipment Aubrie Basco 19 years of experience at Bond Equipment position Truck Sales Renee Tyler 6 years of experience at Bond Equipment position Parts manager Jim Klenzendorf 2 years experience at Bond Equipment Accounting manager 3. Marketing Strategy: For your Proposal to be considered, you must submit the Marketing Strategy you will use if the Cooperative accepts all or part of your Proposal. (Example: Explain how your company will initially inform Cooperative members of your BuyBoard Contract, and how you will continue to support the BuyBoard for the duration of the Contract term.) Attach additional pages if necessary. We only offer the BuyBoard and use it on all government sales including municipalities. Page 36 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com 4. Describe Proposer's financial capability to perform the Contract. State or describe the firm's financial strength and rating, bonding capacity, and insurance coverage limits. State whether the firm, or any of the firm's past or present owners, principal shareholders or stockholders, or officers, have been a debtor party to a bankruptcy, receivership, or insolvency proceeding in the last 7 years, and identify any such debtor party by name and relationship to or position with your firm. The proposer has not defaulted on any contracts and has general liability, worker compensation, garage liability, property, dealer open lot and umbrella insurance that are force. We also have dealer bond coverage. None of the stock holders have been in bankruptcy. 5. Does your company have any outstanding financial judgments and/or is it currently in default on any loan or financing agreement? If so, provide detailed information on the nature of such items and prospects for resolution. No, all loans and bills are in good standing. 6. List all contracts, if any, in the last 10 years on which Proposer has defaulted, failed to complete or deliver the work, or that have been terminated for any reason. For each such contract, provide the project name, scope, value and date and the name of the procuring entity. Fully explain the circumstances of the default, failure to complete or deliver the work, or termination. No defaults 7. List all litigation or other legal proceedings (including arbitration proceedings), if any, in the last 10 years brought against your firm, or any of the firm's past or present owners, principal shareholders or stockholders, officers, agents or employees, that relate to or arise from a contract similar to this Contract or the Work contemplated under this Contract. Provide the style of the lawsuit or proceeding (name of parties and court or tribunal in which filed), nature of the claim, and resolution or current status. No litigation or legal proceedings related to this contract or work contemplated under this contract. Page 37 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com VENDOR REQUEST TO SELF -REPORT BUYBOARD PURCHASES The General Terms and Conditions require that all Purchase Orders generated by or under any Contract awarded under this Proposal Invitation be processed through the BuyBoard and, except as expressly authorized in writing by the Cooperative administrator, Vendors are not authorized to process Purchase Orders received directly from Cooperative members that have not been processed through the BuyBoard or provided to the Cooperative. In accordance with this provision, Vendor may request authorization of the Cooperative administrator to self -report Cooperative member purchases if awarded a Contract under this Proposal Invitation. By making such a request, Vendor acknowledges and agrees that self -reporting is specifically subject to and conditioned upon (1) Vendor's agreement to the Additional Terms and Conditions for BuyBoard Self -Reporting which are included in this Proposal Invitation and incorporated herein for all purposes and (2) approval of this request in writing by the Cooperative administrator. Note: This form is NOT required as part of your proposal. You should sign and return this form ONLY if you wish to request authorization to self -report BuyBoard purchases. Any request to self -report will not be effective, and Vendor shall not be authorized to self -report BuyBoard member purchases, unless and until (1) Vendor is awarded a Contract under this Proposal Invitation, and (2) the request has been approved in writing by the Cooperative administrator. By my signature below, I hereby request authorization from the Cooperative administrator to self -report BuyBoard purchases if my company is awarded a Contract. I certify that I am authorized by the above -named Vendor to approve this form, and I have received and read the Additional Terms and Conditions for BuyBoard Self -Reporting included in this Proposal Invitation and do hereby approve and agree to such terms and conditions on behalf of Vendor. NAME OF VENDOR: Bond Equipment Co Inc Signature of Vendor Authorized Representative Printed Name: James A Bond Title: President Date: 8/22/2023 (For Cooperative Administrator Use Only) Approved by BuyBoard Administrator: Effective/Start Date for Self -Reporting: Page 38 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- (Please check (/) the following) P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidss buyboard.com - buyboard.corn REQUIRED FORMS CHECKLIST Reviewed/Completed: Proposer's Acceptance and Agreement PROPOSAL FORMS PART 1: COMPLIANCE FORMS Reviewed/Completed: Proposal Acknowledgements Reviewed/Completed: Felony Conviction Disclosure Reviewed/Completed: Resident/Nonresident Certification Reviewed/Completed: Debarment Certification Reviewed/Completed: Vendor Employment Certification Reviewed/Completed: No Boycott Verification Reviewed/Completed: No Excluded Nation or Foreign Terrorist Organization Certification Reviewed/Completed: Historically Underutilized Business Certification Reviewed/Completed: Acknowledgement of BuyBoard Technical Requirements Reviewed/Completed: Construction -Related Goods and Services Affirmation Reviewed/Completed: Deviation and Compliance Reviewed/Completed: Vendor Consent for Name Brand Use Reviewed/Completed: Confidential/Proprietary Information Reviewed/Completed: EDGAR Vendor Certification Reviewed/Completed: Compliance Forms Signature Page PROPOSAL FORMS PART 2: VENDOR INFORMATION FORMS Reviewed/Completed: Vendor Business Name Reviewed/Completed: Vendor Contact Information (complete in electronic proposal submission system) Reviewed/Completed: Federal and State/Purchasing Cooperative Experience Reviewed/Completed: Governmental References Reviewed/Completed: Company Profile Reviewed/Completed: Texas Regional Service Designation (complete in electronic proposal submission system) Reviewed/Completed: State Service Designation (complete in electronicproposalsubmission system) Reviewed/Completed: National Purchasing Cooperative Vendor Award Agreement (Vendors serving outside Texas only) Reviewed/Completed: Local/Authorized Seller Listings Reviewed/Completed: Manufacturer Dealer Designation Reviewed/Completed: Proposal Invitation Questionnaire Reviewed/Completed: Vendor Request to Self -Report BuyBoard Purchases (optional) Reviewed/Completed: Proposal Specifications, Manufacturer Authorization Letters, Franchise Motor Vehicle Dealer Certificate from Texas or other state Department of Motor Vehicles, Applicable Dealer License, and Vehicle Options List with discount (%) off Catalog/Pricelist and/or other required pricing information including Catalogs/Pricelists (or no bid response) must be submitted with the Proposal or the Proposal will not be considered. Page 51 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com PROPOSAL SPECIFICATION SUMMARY The categories and items specified for this Proposal Invitation are summarized below. For full Proposal Specifications, you must review and complete the Proposal Specification information in the electronic proposal submission system in accordance with the Instructions to Proposers (or, if submitting a hard copy Proposal, timely request and complete the Proposal Specification Form in accordance with the Instructions to Proposers). PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Section 1: Autocar Vehicles 1. Base Model Price for Autocar ACX 4x2 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 350 HP with Allison 3000 RDS, 5 speed transmission, complete with all manufacturer's standard equipment. 2. Base Model Price for Autocar ACM 4x2 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins ISB 200 HP with Allison 3000 RDS transmission, complete with all manufacturer's standard equipment. 3. Base Model Price for Autocar ACX 6x4 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 350 HP with Allison 3000 RDS transmission, complete with manufacturer's standard equipment. 4. Base Model Price for Autocar ACM 6x4 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 300 HP with Allison 3000 RDS, 6 speed transmission, complete with manufacturer's standard equipment. 5. Base Model Price for Autocar DC -64R - Heavy Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 300 HP with Allison 3000 RDS, 6 speed transmission, complete with manufacturer's standard equipment. Page 39 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS 6. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 7. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 8. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 9. Discount (%) off Extended Service Maintenance Agreements. 10. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 3: Autocar Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 11. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 12. Not to Exceed hourly labor rate for Paint and Body Repair. 13. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 4: Battle Motors Vehicles 14. Base Model Price for Battle Motors Low Narrow Tilt — Diesel - Heavy Duty, Low Entry Tilt Cab, Class 6, 7, and 8, GVWR 26,000 - 66,000 lbs., Cummins B6.7, 200-380 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. 15. Base Model Price for Battle Motors Low Narrow Tilt II — Diesel - Heavy Duty, Low Entry Tilt Cab, Class 7 and 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. 16. Base Model Price for Battle Motors Low Narrow Tilt II Crew Cab — Diesel - Heavy Duty, Low Entry Tilt Crew Cab, Class 6 - 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3500 RDS transmission, front axle 20,0001bs, tandem rear axle 40,0001bs, complete with all manufacturer's standard equipment. 17. Base Model Price for Battle Motors Low Entry Tilt II — CNG - Heavy Duty, Low Entry Tilt Cab, Class 7 and 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. 18. Base Model Price for Battle Motors Low Narrow Tilt — Electric - Heavy Duty, Low Entry Tilt Cab, Class 6 - 8, GVWR 26,000 - 54,000lbs, BorgWarner Cascadia Motion HVH410-150, 500 HP, Direct Drive transmission, front axle 20,000lbs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. 19. Base Model Price for Battle Motors Low Narrow Tilt II — Electric - Heavy Duty, Low Entry Tilt Cab, Class 6 - 8, GVWR 33,000 - 72,000Ibs, BorgWarner Cascadia Motion HVH410-150, 500 HP, Two Speed Powershift transmission, front axle 20,0001bs, single rear axle 26,000lbs, complete with all manufacturer's standard equipment. Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 20. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 21. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 22. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 23. Discount (%) off Extended Service Maintenance Agreements. 24. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 6: Battle Motors Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 25. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 26. Not to Exceed hourly labor rate for Paint and Body Repair. 27. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Page 40 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 7: Chevrolet Vehicles 28. Base Model Price for Chevrolet 4500HD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. 29. Base Model Price for Chevrolet 550OHD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. 30. Base Model Price for Chevrolet 6500HD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. 31. Base Model Price for Chevrolet LCF 3500 — Low cab forward, regular cab, 6.6L V8 gasoline engine, 6 -speed automatic transmission with double overdrive, 350 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. 32. Base Model Price for Chevrolet LCF 4500 — Low cab forward, regular cab, 6.6L V8 gasoline engine, 6 -speed automatic transmission with double overdrive, 350 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. 33. Base Model Price for Chevrolet LCF 450OHD — Low cab forward, regular cab, 5.2L turbocharged I-4 diesel engine, 6 - speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. - ft. of torque, complete with all manufacturer's standard equipment. 34. Base Model Price for Chevrolet LCF 4500XD — Low cab forward, regular cab, 5.2L turbocharged I-4 diesel engine, 6 - speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. - ft. of torque, complete with all manufacturer's standard equipment. 35. Base Model Price for Chevrolet LCF 5500HD — Low cab forward, regular cab, 5.2L turbocharged I-4 diesel engine, 6 - speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. - ft. of torque, complete with all manufacturer's standard equipment. 36. Base Model Price for Chevrolet LCF 5500XD — Low cab forward, regular cab, 5.2L turbocharged I-4 diesel engine, 6 - speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. - ft. of torque, complete with all manufacturer's standard equipment. 37. Base Model Price for Chevrolet LCF 6500XD — Low cab forward, regular cab, 6.7L Cummins turbo diesel engine, Allison 2550 Rugged Duty Series 6 -speed automatic transmission with double overdrive and Standard Integrated Power Take - Off (PTO) capability, 260 horsepower and 660 lb. -ft. of torque, complete with all manufacturer's standard equipment. 38. Base Model Price for Chevrolet LCF 7500XD — Low cab forward, regular cab, 6.7L Cummins turbo diesel engine, Allison 2500 Rugged Duty Series 6 -speed automatic transmission with double overdrive and Standard Integrated Power Take - Off (PTO) capability, 260 horsepower and 660 lb. -ft. of torque, complete with all manufacturer's standard equipment. Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS 39. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 40. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 41. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 42. Discount (%) off Extended Service Maintenance Agreements. 43. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 9: Chevrolet Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 44. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 45. Not to Exceed hourly labor rate for Paint and Body Repair. 46. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Page 41 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.corn - buyboard.corn Section 10: Dodge Ram Vehicles 47. Base Model Price for Ram Tradesman 4500 Chassis Regular Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. 48. Base Model Price for Ram Tradesman 4500 Chassis Crew Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. 49. Base Model Price for Ram Tradesman 5500 Chassis Regular Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. 50. Base Model Price for Ram Tradesman 5500 Chassis Crew Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS 51. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 52. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 53. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 54. Discount (%) off Extended Service Maintenance Agreements. 55. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 12: Dodge Ram Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 56. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 57. Not to Exceed hourly labor rate for Paint and Body Repair. 58. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 13: Ford Vehicles 59. Base Model Price for Ford F-650 SD Pro Loader Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. 60. Base Model Price for Ford F-650 SD Pro Loader Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. 61. Base Model Price for Ford F-650 SD Straight Frame Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 - speed automatic with double overdrive, complete with all manufacturer's standard equipment. 62. Base Model Price for Ford F-650 SD Straight Frame Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. 63. Base Model Price for Ford F-750 SD Straight Frame Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 - speed automatic with double overdrive, complete with all manufacturer's standard equipment. 64. Base Model Price for Ford F-750 SD Straight Frame Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 65. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 66. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 67. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 68. Discount (%) off Extended Service Maintenance Agreements. 69. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 15: Ford Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 70. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 71. Not to Exceed hourly labor rate for Paint and Body Repair. 72. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Page 42 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 16: Freightliner Vehicles 73. Base Model Price for Freightliner Model M2-106 - Medium Duty, Cab, Class 6 - 8; Cab and chassis, 66,000# GVW, Eaton 6 speed transmission, 200 HP, front axle 6,0001bs, rear axle 13,0001bs, complete with all manufacturer's standard equipment. 74. Base Model Price for Freightliner Model 108SD - Heavy Duty, Cab, Class 7/8, Cab and chassis, 3169,000# GVW, Eaton 9 speed transmission, 520 - 1250 HP, front axle 10,0001bs, rear axle 21,0001bs, complete with all manufacturer's standard equipment. 75. Base Model Price for Freightliner Model M2-112 - Heavy Duty, Cab, Class 7/8, and chassis, 52,000# GVW, Detroit DD13 260 - 525 HP at 1625 RPM, Eaton 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. 76. Base Model Price for Freightliner Model M2-112 Natural Gas - Heavy Duty, Cab, Class 7/8, and chassis, 66,000# GVW, Detroit DD13 250 - 320 HP at 1625 RPM, Eaton 10 speed transmission, front axle 12,000lbs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. 77. Base Model Price for Freightliner Model Cascadia 125 - Heavy Duty, Class 8, Cab and chassis, 52,000# GVW, Detroit DD15 350 - 615 HP at 1625 RPM, Eaton FR -15210B 10 speed transmission, front axle 12,000lbs, rear axle 40,000lbs, complete with all manufacturer's standard equipment. 78. Base Model Price for Freightliner Model Natural Gas - Heavy Duty, Class 8, Cab and chassis, 60,600# GVW, Detroit DD15 400 HP at 1625 RPM, Eaton FR -15210B 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. 79. Base Model Price for Freightliner Model 114SD - Heavy Duty, Class 7/8, Cab and chassis, 92,000# GVW, Detroit DD13 260 - 525 HP at 1625 RPM, Eaton FR15210B, front axle 12,000lbs, rear axle 40,000lbs, complete with all manufacturer's standard equipment. 80. Base Model Price for Freightliner Model 114SD Natural Gas - Heavy Duty, Class 7/8, Cab and chassis, 62,000# GVW, Detroit DD13 260 - 400 HP at 1625 RPM, Eaton FR15210B, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. 81. Base Model Price for Freightliner Model eCascadia - Heavy Duty, Class 8, Cab and chassis, 82,000# GVW, Detroit DD15425 HP (317 kW), Eaton FR -15210B 10 speed transmission, front axle 12,0001bs, rear axle 40,000lbs, complete with all manufacturer's standard equipment. 82. Base Model Price for Freightliner Model eM2 - Medium Duty, Cab, Class 6/7, Typical Range 180 - 250 Miles, Cab and chassis, 26,000 - 33,000# GVW, Class 6 Continuous Horsepower, front axle 6,0001bs, rear axle 13,0001bs, complete with all manufacturer's standard equipment. 83. Base Model Price for Freightliner Model EconicSD - Heavy Duty, Class 8, Cab and chassis, Detroit DDS HP 350, Allison Automatic 3000 series 6 -speed, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 84. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 85. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 86. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 87. Discount (%) off Extended Service Maintenance Agreements. 88. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 18: Freightliner Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 89. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 90. Not to Exceed hourly labor rate for Paint and Body Repair. 91. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Page 43 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 19: Hino Vehicles 92. Base Model Price for Hino 17 - Medium Duty, Conventional Cab, 33,000 GVWR, BBC - 108", Engine: Cummins B6.7L, 260 hp at 2,500 rpm, complete with all manufacturer's standard equipment. 93. Base Model Price for Hino 16 - Medium Duty, Conventional Cab, 23,000-25,950 GVWR, BBC - 108", Engine: Cummins B6.7L, 260 hp at 2,500 rpm, complete with all manufacturer's standard equipment. 94. Base Model Price for Hino XL - Medium Duty, Conventional Cab, 33,000 GVWR, BBC - 108", Engine: Cummins L9, 360 hp at 2,500 rpm, complete with all manufacturer's standard equipment. 95. Base Model Price for Hino XL - Medium Duty, Conventional Cab, 34,200-66,000 GVWR, BBC - 108", Engine: Cummins L9, 360 hp at 2,500 rpm, complete with all manufacturer's standard equipment. Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS 96. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 97. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 98. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 99. Discount (%) off Extended Service Maintenance Agreements. 100. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 21: Hino Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 101. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 102. Not to Exceed hourly labor rate for Paint and Body Repair. 103. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 22: International Vehicles 104. Base Model Price for International HV507 4x4 - Severe Duty, Class 6-7, Cummins B6.7 200 hp,10,000 front axle, 17,500 rear axle, air brakes, 6 speed transmission, complete with all manufacturer's standard equipment. 105. Base Model Price for International HV607 6x4 - Severe Duty, Class 8, Cummins L9 260 hp, 10,000# front axle,40,000# rear axle, 10 speed transmission, air brakes, complete with all manufacturer's standard equipment. 106. Base Model Price for International MV607 4x2 - Medium Duty, Class 6-7, Cummins B6.7 200 hp, 8000# front axle, hydraulic brakes, 17,500# rear axle, 6 speed transmission, complete with all manufacturer's standard equipment. 107. Base Model Price for International HV613 - Severe Duty, Class 6-7, International A26 450 hp, 16,000# front axle, 40,000# rear axle, 6 speed transmission, air brakes, complete with all manufacturer's standard equipment. 108. Base Model Price for International HV607 4x2 - Severe Duty, Class 6-7, Cummins B6.7 200 hp, 10,000# front axle, 17,500# rear axle, 6 speed transmission, air brakes, complete with all manufacturer's standard equipment. 109. Base Model Price for International MV60E - Electric, complete with all manufacturer's standard equipment. 110. Base Model Price for International Lonestar - Heavy Duty, Class 8, Cummins X15 565 565 565 hp, 18 speed transmission, 13,200# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. 111. Base Model Price for International HX520 - Severe Duty, Class 8, Cummins X15 565 hp, 18 speed transmission, 14,600# front axle, 46,000# rear axle, air brakes, complete with all manufacturer's standard equipment. 112. Base Model Price for International HX615 - Severe Duty, Class 8, International A26 430 hp, 6 speed transmission, 20,000# front axle, 46,000# rear axle, air brakes, complete with all manufacturer's standard equipment. 113. Base Model Price for International HX620 6x4 - Heavy Duty, Class 8, Cummins X15 450 hp, 10 speed transmission, 12,000# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. 114. Base Model Price for International LT625 6x4 - Heavy Duty, Class 8, International A26 410 hp, 10 speed transmission, 12,000# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. 115. Base Model Price for International HV513 4x2 - Heavy Duty, Class 8, International A26 365 hp, 12,000# front axle, 23,000# rear axle, air brakes, 10 speed transmission, complete with all manufacturer's standard equipment. 116. Base Model Price for International RH613 4x2 - Heavy Duty, Class 8, International A26 370 hp, 12,000# front axle, 23,000# rear axle, 10 speed, air brakes, complete with all manufacturer's standard equipment. 117. Base Model Price for International CV515 - Medium Duty, Class 4-5, International 6.6 350 hp, Allison automatic,6000# front axle, 10,000# rear axle, hydraulic brakes, complete with all manufacturer's standard equipment. Page 44 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.corn - buyboard.corn Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 118. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 119. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 120. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 121. Discount (%) off Extended Service Maintenance Agreements. 122. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 24: International Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 123. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 124. Not to Exceed hourly labor rate for Paint and Body Repair. 125. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 25: Isuzu Vehicles 126. Base Model Price for Isuzu Cabover NPR - Medium Duty, Class 3, Standard Cab, 12,000 GVWR, 6.6L GenV, 8 -Cylinder gasoline engine, complete with all manufacturer's standard equipment. 127. Base Model Price for Isuzu Cabover FTR - Heavy Duty, Class 6, Standard Cab, 25,950 GVWR, Cummins B6.7L Diesel engine, complete with all manufacturer's standard equipment. 128. Base Model Price for Isuzu Cabover FVR - Heavy Duty, Class 7, Standard Cab, 33,000 GVWR, Cummins B6.7L Diesel engine 260, complete with all manufacturer's standard equipment. 129. Base Model Price for Isuzu Cabover N -Series EV - 235 miles of range both AC and DC fast charging, 19,500 -pound GVWR for powerful Class 5, complete with all manufacturer's standard equipment. 130. Base Model Price for Isuzu Cabover NPR -HD - 14,500 GVWR, 5.2L I4 Turbocharged engine, complete with all manufacturer's standard equipment. 131. Base Model Price for Isuzu Cabover NQR - Medium Duty, Class 5, 17,950 GVWR, 6.6L GMPT L8T GENV, 8 -Cylinder gasoline engine, complete with all manufacturer's standard equipment. Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS 132. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 133. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 134. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 135. Discount (%) off Extended Service Maintenance Agreements. 136. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 27: Isuzu Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 137. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 138. Not to Exceed hourly labor rate for Paint and Body Repair. 139. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 28: Kenworth Vehicles 140. Base Model Price for Kenworth Model C500 - Heavy Duty, 150,000 lb. GVWR, Conventional Cab, Cummins ISX 15 Engine, complete with all manufacturer's standard equipment. 141. Base Model Price for Kenworth Model T180 - Medium Duty, 19,000 lb. GVWR, Conventional Cab, PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. 142. Base Model Price for Kenworth Model T280 - Medium Duty, 26,000 lb. GVWR, Conventional Cab, PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. 143. Base Model Price for Kenworth Model T380 - Medium Duty, Class 7, 33,000 lb. GVWR, Conventional Cab, PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. 144. Base Model Price for Kenworth Model T480 - Medium Duty, Class 8, 66,000 lb. GVWR, Conventional Cab, PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. Page 45 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.corn - buyboard.corn 145. Base Model Price for Kenworth Model K270 - Medium Duty, Class 6, 26,000 lb. GVWR, CUE Cab, PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. 146. Base Model Price for Kenworth Model K270E - Medium Duty, Class 6, 26,000 lb. GVWR, Hydraulic 55 Degree Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batteries - 200 mile range, complete with all manufacturer's standard equipment. 147. Base Model Price for Kenworth Model K370 - Medium Duty, Class 7, 33,000 lb. GVWR, Hydraulic 55 Degree Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batterie, complete with all manufacturer's standard equipment. 148. Base Model Price for Kenworth Model K370E - Medium Duty, Class 7, 33,000 lb. GVWR, Hydraulic 55 Degree Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batteries - 200 mile range, complete with all manufacturer's standard equipment. 149. Base Model Price for Kenworth Model T680 - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. 150. Base Model Price for Kenworth Model T680 FCEV - Heavy Duty, Class 8, 82,000 lbs Max GVWR, Conventional Cab, Toyota's 310kW Dual Motor Assembly/415 Hp and Gen 2 Dual Fuel Cell Module, 58.8 Kg Hydrogen Storage, 450 Miles of Range, complete with all manufacturer's standard equipment. 151. Base Model Price for Kenworth Model T680E - Heavy Duty, Class 8, Conventional Cab, 396 kWh battery, CCS1 DC Fast Charging, 150 Miles of Range, complete with all manufacturer's standard equipment. 152. Base Model Price for Kenworth Model T800 - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. 153. Base Model Price for Kenworth Model T880 - Medium Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. 154. Base Model Price for Kenworth Model W900L - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, Extended Hood, Cummins X15 Engine, complete with all manufacturer's standard equipment. 155. Base Model Price for Kenworth Model W990 - Heavy Duty, Conventional Cab, PACCAR MX -13 Engine, complete with all manufacturer's standard equipment. Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS 156. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 157. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 158. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 159. Discount (%) off Extended Service Maintenance Agreements. 160. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 30: Kenworth Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 161. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 162. Not to Exceed hourly labor rate for Paint and Body Repair. 163. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 31: Mack Model Vehicles 164. Base Model Price for Mack Granite - Heavy Duty, Class 8, 35,000 - 92,000+ GVW, Mack MP7 engine, 325 - 505 HP, day cab, Eaton -Fuller Manual Transmission, front axle Mack UniMax Axles with Integrated Hub, Drive Axles Mentor "S" Cam Q -Plus Brakes, complete with all manufacturer's standard equipment. 165. Base Model Price for Mack TERRAPRO - Heavy Duty, Class 8, 35,000 - 81,000+ GVW, Mack MP7 engine, 325 - 505 HP, day cab, mDRIVE HD and XHD Transmission, front axle Mack UniMax, Drive Axles Mack C150/151 Series, complete with all manufacturer's standard equipment. 166. Base Model Price for Mack LR - Heavy Duty, Class 8, Low Entry Cabover, 43,000 - 72,000 GVW, Mack MP7 engine, 320-355 HP, Allison 4500 Series transmission, front axle Mack FXL20, rear axle Mack C150/151 Axle Carriers, complete with all manufacturer's standard equipment. Page 46 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com 167. Base Model Price for Mack LR Electric - Heavy Duty, Low Entry Cabover, 66,000 lbs GVWR, 2 AC motors with 400kW Peak (536 hp) & 334 kW (448 hp) continuous power, 4 NMC lithium -ion batteries, 600V, Up to 150kW charge power with max current of 200A, 550-750 volts charing system, Allison 4500 Series transmission, front axle Mack FXL20, rear axle Mack S462R, complete with all manufacturer's standard equipment. 168. Base Model Price for Mack Pinnacle - Heavy Duty, Class 8, 35,000 - 62,000 GVW, Mack MP8 engine, day cab, 415- 505 HP, Maxitorque ES transmission, S38/40 Series Axle, complete with all manufacturer's standard equipment. 169. Base Model Price for Mack MD Series - Heavy Duty, Cummins B6.7 Engine, 220hp/600 lb. ft, Allison 2500HS 6 -speed transmission, complete with all manufacturer's standard equipment. 170. Base Model Price for Mack MD Electric - Heavy Duty, Class 6, NMC Battery packs, CCS1 Charging, 140 miles (2 batteries) max range, 150 KWH battery capacity (2 batteries), 260 Peak HP, complete with all manufacturer's standard equipment. 171. Base Model Price for Mack Anthem - Heavy Duty, Class 8, 35,000 - 62,000 GVW, MP7 Engine, 415 - 505 HP, day cab, Eaton-Fuler transmission, complete with all manufacturer's standard equipment. Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS 172. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 173. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 174. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 175. Discount (%) off Extended Service Maintenance Agreements. 176. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 33: Mack Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 177. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 178. Not to Exceed hourly labor rate for Paint and Body Repair. 179. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 34: Mitsubushi Vehicles 180. Base Model Price for Mitsubushi Cabover TV - Heavy Duty, 33,500 GVW, 4 -stroke cycle, water cooled direct injection, turbocharged diesel engine, G330 -12K, Electronic -automated unsynchronized transmission, complete with all manufacturer's standard equipment. 181. Base Model Price for Mitsubushi Cabover Canter - Light Duty, 6,500 GVW, 4V21 engine, Synchromesh manual transmission, complete with all manufacturer's standard equipment. 182. Base Model Price for Mitsubushi Cabover FA/FI - Medium Duty, 9,600 GVW, Compression Ignition,4 Stroke, Direct injection, turbocharged diesel engine, MO3656, Mechanical, 6 forward + 1 reverse transmission, complete with all manufacturer's standard equipment. 183. Base Model Price for Mitsubishi Cabover Fighter - Medium Duty, 7.5t GVW, 4V20 Intercooler Turbo engine, complete with all manufacturer's standard equipment. 184. Base Model Price for Mitsubishi Cabover FJ - Heavy Duty, 25,000 GVW, Compression Ignition, 4 Stroke, Direct Injection, turbocharged inter cooled engine, G85 Synchromesh type 6 Forward + 1 Reverse manual transmission, complete with all manufacturer's standard equipment. 185. Base Model Price for Mitsubishi Cabover FO - Heavy Duty, 31,000 Max GVW, 4 -stroke cycle, water cooled direct injection, turbocharged diesel engine, 9 -speed manual transmission, complete with all manufacturer's standard equipment. 186. Base Model Price for Mitsubishi Cabover eCanter Electric - Light Duty, GVW 6t Class, Standard cab, all electric, S Battery, complete with all manufacturer's standard equipment. Page 47 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS 187. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 188. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 189. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 190. Discount (%) off Extended Service Maintenance Agreements. 191. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 36: Mitsubushi Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 192. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 193. Not to Exceed hourly labor rate for Paint and Body Repair. 194. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 37: Peterbilt Vehicles 195. Base Model Price for Peterbilt Model 220 - Medium Duty, Cab over engine, Paccar PX7 engine, 220 HP, Allison 2500 HS transmission, 26,000 GVWR, front gross axle weight 12,000 lbs., rear gross axle weight 17,000-21,000 lbs., complete with all manufacturer's standard equipment. 196. Base Model Price for Peterbilt Model 520 - Heavy Duty, Cab over engine, Paccar PX9 350 HP, 3000 RDS transmission, 57.6" BBC, 33,000 GVWR, front gross axle weight 12,000-22000 lbs., rear gross axle weight 23,000-46- lbs., complete with all manufacturer's standard equipment. 197. Base Model Price for Peterbilt Model 365 - Heavy Duty, Conventional cab, Paccar MX13, 455 HP, Fuller 10 transmission, front gross axle weight 12,000-22,0001bs, rear gross axle weight 21,000-70,0001bs, 33,000 GVWR, 115" BBC, complete with all manufacturer's standard equipment. 198. Base Model Price for Peterbilt Model 367 - Heavy Duty, Conventional cab, Paccar MX13, 455 HP, Fuller 10 transmission, front gross axle weight 12,000-22,0001bs, rear gross axle weight 21,000-70,0001bs, 52,000 GVWR, 123" BBC, complete with all manufacturer's standard equipment. 199. Base Model Price for Peterbilt Model 389 - Heavy Duty Conventional cab, Paccar MX -13 engine, 455 HP, Fuller 10 speed transmission, front gross axle weight 12,000 lbs., rear gross axle weight 38,000 lbs., 50,000 GVWR, 123" BBC, complete with all manufacturer's standard equipment. 200. Base Model Price for Peterbilt Model 589 - Heavy Duty, Engine PACCAR MX -13, Transmissions PACCAR TX -12, Front Axle PACCAR, Dana, Meritor, Rear Axle PACCAR, Dana, Meritor, complete with all manufacturer's standard equipment. 201. Base Model Price for Peterbilt Model 548 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31k, complete with all manufacturer's standard equipment. 202. Base Model Price for Peterbilt Model 567 - Medium Duty, Conventional Aero cab vocational unit, Paccar MX13 engine, 455 HP, Fuller 10 speed transmission, front gross axle weight 12,000-22,000 lbs., rear gross axle weight 21,000-70,000 lbs., 33,000 and up GVWR, 115" BBC, complete with all manufacturer's standard equipment. 203. Base Model Price for Peterbilt Model 537 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31k, complete with all manufacturer's standard equipment. 204. Base Model Price for Peterbilt Model 536 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31k, complete with all manufacturer's standard equipment. 205. Base Model Price for Peterbilt Model 535 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31k, complete with all manufacturer's standard equipment. 206. Base Model Price for Peterbilt Model 579 - Heavy Duty, Aero cab, Paccar MX -13 engine, 455 HP, Paccar 12 -Speed Auto transmission, front gross axle weight 12,000-20,000 lbs., rear gross axle weight 38,000-46,000 lbs., 50,000 GVWR, 117" BBC, complete with all manufacturer's standard equipment. Page 48 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 P.O. Box 400, Austin, Texas 78767 800.695.2919 • bids@buyboard.com • buyboard.com Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS 207. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 208. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 209. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 210. Discount (%) off Extended Service Maintenance Agreements. 211. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 39: Peterbilt Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 212. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 213. Not to Exceed hourly labor rate for Paint and Body Repair. 214. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 40: Volvo Vehicles 215. Base Model Price for Volvo VNL - Heavy Duty, 122.4" BBC, 50,000 GVW, Fuller 10 speed transmission, D13 engine, conventional cab, tandem axle, complete with all manufacturer's standard equipment. 216. Base Model Price for Volvo VNX - Heavy Duty 122.4" BBC, 50,000 GVW, Fuller 10 speed transmission, D13 engine, conventional cab, tandem axle, complete with all manufacturer's standard equipment. 217. Base Model Price for Volvo VNR - Heavy Duty 113" BBC, 33,000 GVW, Fuller 10 speed transmission, D11 engine, conventional cab, single axle, complete with all manufacturer's standard equipment. 218. Base Model Price for Volvo VNR Electric - Up to 230 miles, Up to 33,000 GVW, Local distribution and regional transportation with planned routes and frequent stops. Including food and beverage and other short driving cycle services, complete with all manufacturer's standard equipment. 219. Base Model Price for Volvo VAH - Heavy Duty 113.6" Daycab designed to provide outstanding performance for urban deliveries. Volvo D11 325-425 hp 1250-1550 lb.- ft. Volvo I -Shift - 12 speed Eaton - 10 speed, complete with all manufacturer's standard equipment. 220. Base Model Price for Volvo VHD - Heavy Duty Volvo D11 325-425 hp 1250-1550 lb -ft. Volvo D13 405-500 hp 1450- 1900 lb -ft, complete with all manufacturer's standard equipment. Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS 221. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 222. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 223. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 224. Discount (%) off Extended Service Maintenance Agreements. 225. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 42: Volvo Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 226. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 227. Not to Exceed hourly labor rate for Paint and Body Repair. 228. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Section 43: Western Star Vehicles 229. Base Model Price for Western Star 47X - Medium Duty, Engine Displacement 9L to 13L Horsepower/ Torque 260/860 to 525/1,850, complete with all manufacturer's standard equipment. 230. Base Model Price for Western Star 49X - Medium Duty, Engine Displacement 12L to 16L Horsepower/ Torque 350/1,350 to 605/2,050 complete with all manufacturer's standard equipment. 231. Base Model Price for Western Star 57X - Heavy Duty, Engine Detroit DD13 Gen 5 370-525 HP, 1250-1850 lb. -ft, Transmission Detroit DT12 Direct and Overdrive AMT, complete with all manufacturer's standard equipment. Page 49 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 DgBoard- P.O. Box 400, Austin, Texas 78767 800.695.2919 - bidsrabuyboard.corn - buyboard.corn Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS 232. Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 233. Discount (%) off Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. 234. Discount (%) off Original Equipment Manufacturer (OEM) Parts. 235. Discount (%) off Extended Service Maintenance Agreements. 236. Discount (%) off Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Section 45: Western Star Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 237. Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 238. Not to Exceed hourly labor rate for Paint and Body Repair. 239. Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Page 50 of 82 PROPOSAL FORMS COMM/SVCS v.04.28.2023 Bond Equipment Company Information Contact: Andy Bond Address: 2946 Irving Blvd Dallas, TX 75247 Phone: (214) 637-0760 Email: Andyb@bondequipment.com Web Address: https://bondequipment.com/ By submitting your response, you certify that you are authorized to represent and bind your company. James A Bond Signature Submitted at 8/24/2023 12:05:25 PM (CT) Requested Attachments andyb@bondegipment.com Email BuyBoard Proposal Invitation No. 723-23, Medium and Heavy Duty Proposal -No -723-23 updated Trucks, Parts, and Maintenance Repair Service 8.24.2023.pdf REQUIRED -In PDF format, upload all proposal invitation documents available for download at vendor.buyboard.com including any additional pages, as necessary. NOTICE: DO NOT complete proposal forms in internet browser. No data will be stored. Download file to computer and complete proposal forms prior to submitting. (Please DO NOT password protect uploaded files.) Manufacturer Authorization Letter(s) Bond Equipment BuyBoard.pdf REQUIRED -Upload Manufacturer Authorization Letter(s) in PDF format. Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment proposed. Proposer's responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the Texas regions and/or states in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. Franchise Motor Vehicle Dealer Certificate(s) and/or Dealer License(s) Franchised Motor Vehicle Dealer Battle Motors.pdf In PDF format, upload Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Catalog/Pricelist for OEM Options and Equipment Options Catalog By Model.pdf REQUIRED -In Excel or PDF format, upload catalog(s)/pricelist(s) in accordance with proposal invitation instructions. Vendors shall submit catalog(s)/pricelist(s) with their Proposal response or Proposal will not be considered. No paper catalogs or manufacturer/vendor websites will be accepted. File size must not exceed 250MB. (Please DO NOT password protect uploaded files.) Catalog/Pricelist for Third Party Options (not OEM) and Equipment No response REQUIRED -In Excel or PDF format, upload catalog(s)/pricelist(s) in accordance with proposal invitation instructions. Vendors shall submit catalog(s)/pricelist(s) with their Proposal response or Proposal will not be considered. No paper catalogs or manufacturer/vendor websites will be accepted. File size must not exceed 250MB. (Please DO NOT password protect uploaded files.) Catalog/Pricelist for Original Equipment Manufacturer (OEM) Parts battle price list only 2023 .pdf REQUIRED -In Excel or PDF format, upload catalog(s)/pricelist(s) in accordance with proposal invitation instructions. Vendors shall submit catalog(s)/pricelist(s) with their Proposal response or Proposal will not be considered. No paper catalogs or manufacturer/vendor websites will be accepted. File size must not exceed 250MB. (Please DO NOT password protect uploaded files.) Page 3 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Exceptions and/or Detailed Information Related to Discount % and/or No response Hourly Labor Rate Proposed In PDF format and if necessary, vendor shall attach detailed information regarding exceptions to pricing and/or discount percentage and define the services that are proposed to be provided. NOTE: IF DETAILED INFORMATION IS NOT SUBMITTED, PROPOSAL MAY NOT BE CONSIDERED. (Please DO NOT password protect uploaded files.) Company Profile Company Profile Buy board 723- 23.docx REQUIRED -Information on awarded Cooperative Contracts is available to Cooperative Members on the BuyBoard website. If your company is awarded a Contract under this Proposal Invitation, please provide a brief company description that you would like to have included with your company profile on the BuyBoard website. Submit your company profile in a separate file, in Word format, with your Proposal. (Note: Vendor is solely responsible for any content provided for inclusion on the BuyBoard website. The Cooperative reserves the right to exclude or remove any content in its sole discretion, with or without prior notice, including but not limited to any content deemed by the Cooperative to be inappropriate, irrelevant to the Contract, inaccurate, or misleading.) IRS Form W-9 Request for Taxpayer Identification Number and W-9 Buy Board 723-23.pdf Certification REQUIRED -In PDF format, upload W-9 form. (Please DO NOT password protect uploaded files.) Bid Attributes 1 Federal Identification Number Federal Identification Number [_ 75-0929505 2 HUB/No Israel Boycott Certification/No Excluded Nation or Foreign Terrorist Certification HUB/No Israel Boycott Certification/No Excluded Nation or Foreign Terrorist Certification 3 1 No Israel Boycott Certification A Texas governmental entity may not enter into a contract with a value of $100,000 or more that is to be paid wholly or partly from public funds with a company (excluding a sole proprietorship) that has 10 or more full-time employees for goods or services unless the contract contains a written verification from the company that it: (1) does not boycott Israel; and (2) will not boycott Israel during the term of the contract. (TEX. GOV'T CODE Ch. 2270). Accordingly, this certification form is included to the extent required by law. "Boycott Israel" means refusing to deal with, terminating business activities with, or otherwise taking any action that is intended to penalize, inflict economic harm on, or limit commercial relations specifically with Israel, or with a person or entity doing business in Israel or in an Israeli -controlled territory, but does not include an action made for ordinary business purposes. TEX. GOV'T CODE §808.001(1). By signature on the Compliance Forms Signature Page, to the extent applicable, I certify and verify that Vendor does not boycott Israel and will not boycott Israel during the term of any contract awarded under this Proposal Invitation, that this certification is true, complete and accurate, and that I am authorized by my company to make this certification. Yes Page 4 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 1 No Excluded Nation or Foreign Terrorist Organization Certification Chapter 2252 of the Texas Government Code provides that a Texas governmental entity may not enter into a contract with a company engaged in active business operations with Sudan, Iran, or a foreign terrorist organization — specifically, any company identified on a list prepared and maintained by the Texas Comptroller under Texas Government Code §§806.051, 807.051, or 2252.153. (A company that the U.S. Government affirmatively declares to be excluded from its federal sanctions regime relating to Sudan, Iran, or any federal sanctions regime relating to a foreign terrorist organization is not subject to the contract prohibition.) By signature on the Compliance Forms Signature Page, I certify and verify that Vendor is not on the Texas Comptroller's list identified above; that this certification is true, complete and accurate; and that I am authorized by my company to make this certification. Yes 5 I MWBE/HUB Status Certification A Proposer that has been certified as a Historically Underutilized Business (also known as a Minority/Women Business Enterprise or "MWBE" and all referred to in this form as a "HUB") is encouraged to indicate its HUB certification status when responding to this Proposal Invitation. The BuyBoard website will indicate HUB certifications for awarded Vendors that properly indicate and document their HUB certification on this form. I certify that my company has been certified as a MWBE/HUB in the following categories: (Please check all that apply) 6 Minority Owned Business Minority Owned Business ❑ Minority Owned Business 7 Women Owned Business Women Owned Business ❑ Women Owned Business 8 I Service -Disabled Veteran Owned Business Service -Disabled Veteran Owned Business (veteran defined by 38 U.S.C. §101(2), who has a service -connected disability as defined by 38 U.S.C. § 101(16), and who has a disability rating of 20% or more as determined by the U. S. Department of Veterans Affairs or Department of Defense) ❑ Service -Disabled Veteran Owned Business 9 Certification Number Certification Number No response 1 0 Name of Certifying Agency Certifying Agency No response 1 Non-MWBE/HUB My company has NOT been certified as a MWBE/HUB ❑ Non -HUB 1 Vendor General Contact Information 2 Proposal/Contract General Contact Information Page 5 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 3 Vendor Proposal/Contract Contact Name Vendor Proposal/Contract Contact Name Andy Bond 1 4 Vendor Proposal/Contract Contact E-mail Address Vendor Proposal/Contract Contact E-mail Address andyb@bondequipment.com 1 5 Vendor Proposal/Contract Mailing Address Vendor Proposal/Contract Mailing Address 2946 Irving Blvd 1 6 Vendor Proposal/Contact Mailing Address - City Vendor Proposal/Contact Mailing Address - City Dallas 1 7 Vendor Proposal/Contact Mailing Address - State Vendor Proposal/Contact Mailing Address - State (Abbreviate State Name) TX 1 8 Vendor Proposal/Contact Mailing Address - Zip Code Vendor Proposal/Contact Mailing Address - Zip Code 75247 1 9 Vendor Proposal/Contact Phone Number Vendor Proposal/Contact Phone Number (>ooc->oa->000c) 214-637-0760 2 0 Vendor Proposal/Contact Extension Number Vendor Proposal/Contact Extension Number No response 2 Company Website Company Website (www.xxxxx.com) https://bondequipment.com/ 2 Purchase Orders Contact Information 2 All Purchase Orders from Cooperative members will be available through the Internet. Vendors need Internet access and at least one e-mail address so that notification of new orders can be sent to the Internet contact when a new purchase order arrives. An information guide will be provided to Vendors to assist them with retrieving their orders. Please select options below for receipt of Purchase Orders and provide the requested information: • I will use the internet to receive Purchase Orders at the following address Yes Page 6 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 3 Purchase Order E-mail Address Purchase Order E-mail Address andyb@bondequipment.com 2 4 Purchase Order Contact Name Purchase Order Contact Name Andy Bond 2 5 Purchase Order Contact Phone Number Purchase Order Contact Phone Number (>ox->oa-xooa) 214-637-0760 2 6 Purchase Order Contact Extension Number Purchase Order Contact Extension Number No response 2 7 Alternate Purchase Order E-mail Address Alternate Purchase Order E-mail Address aubrie@bondequipment.com 2 8 Alternate Purchase Order Contact Name Alternate Purchase Order Contact Name Aubrie Basco 2 9 Alternate Purchase Order Contact Phone Number Alternate Purchase Order Contact Phone Number (xxx-xxx-xxxx) 214-637-0760 3 0 Alternate Purchase Order Contact Extension Number Alternate Purchase Order Contact Extension Number No response 3 Purchase Orders Contact Information All Purchase Orders from Cooperative members will be available through the Internet. Vendors need Internet access and at least one e-mail address so that notification of new orders can be sent to the Internet contact when a new purchase order arrives. An information guide will be provided to Vendors to assist them with retrieving their orders. Please select options below for receipt of Purchase Orders and provide the requested information: • Purchase Orders may be received by the Designated Dealer(s) identified on my company's Dealer Designation form as provided to the Cooperative administrator. I understand that my company shall remain responsible for the Contract and the performance of all Designated Dealers under and in accordance with the Contract. Yes 3 Request for Quotes (RFQ) 2 Cooperative members will send RFQs to you by e-mail. Please provide e-mail addresses for the receipt of RFQs: Page 7 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 3 Request for Quote (RFQ) E-mail Address Request for Quote (RFQ) E-mail Address Andyb@bondequipment.com 3 4 Request for Quote (RFQ) Contact Name Request for Quote (RFQ) Contact Name Andy Bond 3 5 Request for Quote (RFQ) Contact Phone Number Request for Quote (RFQ) Contact Phone Number (xxx-xxx->0xx) 214-637-0760 3 6 Request for Quote (RFQ) Contact Extension Number Request for Quote (RFQ) Contact Extension Number No response 3 7 Alternate Request for Quote (RFQ) E-mail Address Alternate Request for Quote (RFQ) E-mail Address aubrie@bondequipment.com 3 8 Alternate Request for Quote (RFQ) Contact Name Alternate Request for Quote (RFQ) Contact Name Aubrie Basco 3 9 Alternate Request for Quote (RFQ) Contact Phone Number Alternate Request for Quote (RFQ) Contact Phone Number (xxx-xxx-xxxx) 214-637-0760 4 0 Alternate Request for Quote (RFQ) Contact Extension Number Alternate Request for Quote (RFQ) Contact Extension Number No response 4 Invoices Your company will be billed monthly for the service fee due under a Contract awarded under this Proposal Invitation. All invoices are available on the BuyBoard website and e-mail notifications will be sent when they are ready to be retrieved. Page 8 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Invoices 2 Please choose only one (1) of the following options for receipt of invoices and provide the requested information: (a) Service fee invoices and related communications should be provided directly to my company at: or (b) In lieu of my company, I request and authorize all service fee invoices to be provided directly to the following billing agent: If Vendor authorizes a billing agent to receive and process service fee invoices, in accordance with the General Terms and Conditions of the Contract, Vendor specifically acknowledges and agrees that nothing in that designation shall relieve Vendor of its responsibilities and obligations under the Contract including, but not limited to, payment of all service fees under any Contract awarded Vendor. Service fee invoices and notices direct to company 4 3 Invoice Company Name Invoice Company Name Bond Equipment Co 4 4 Invoice Company Department Name Invoice Company Department Name Accounts Payable 4 5 Invoice Contact Name Invoice Contact Name Jim Klenzendorf 4 6 Invoice Mailing Address Invoice Mailing Address (P.O. Box or Street Address) 2946 Irving Blvd 4 7 Invoice Mailing Address - City Invoice Mailing Address - City Dallas 4 8 Invoice Mailing Address - State Invoice Mailing Address - State (Abbreviate State Name) TX 4 9 Invoice Mailing Address - Zip Code Invoice Mailing Address (Zip Code) 75247 5 0 Invoice Contact Phone Number Invoice Contact Phone Number (xxx-xxx-xxxx) 214-637-0760 Page 9 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 5 Invoice Contact Extension Number Invoice Contact Extension Number No response 5 2 Invoice Contact Fax Number Invoice Contact Fax Number (xxx-xxx-xxxx) No response 5 3 Invoice Contact E-mail Address Invoice Contact E-mail jimk@bondequipment.com 5 4 Invoice Contact Alternate E-mail Address Invoice Contact Alternate E-mail Address No response 5 5 Billing Agent Company Name Billing Agent Company Name No response 5 6 Billing Agent Department Name Billing Agent Department Name No response 5 7 Billing Agent Contact Name Billing Agent Contact Name No response 5 8 Billing Agent Mailing Address Billing Agent Mailing Address (P.O. Box or Street Address) No response 5 9 Billing Agent Mailing Address - City Billing Agent Mailing Address - City No response 6 0 Billing Agent Mailing Address - State Billing Agent Mailing Address - State (Abbreviate State Name) No response 6 Billing Agent Mailing Address - Zip Code Billing Agent Mailing Address - Zip Code No response 6 2 Billing Agent Contact Phone Number Billing Agent Contact Phone Number (xxx-xxx-xxxx) No response Page 10 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 3 Billing Agent Contact Extension Number Billing Agent Contact Extension Number No response 6 4 Billing Agent Fax Number Billing Agent Fax Number No response 6 5 Billing Agent Contact E-mail Address Billing Agent Contact E-mail Address No response 6 6 Billing Agent Alternative E-mail Address Billing Agent Alternative E-mail Address No response 6 Shipping Via 7 Common Carrier, Company Truck, Prepaid and Add to Invoice, or Other Prepaid and Add to Invoice 6 Payment Terms 8 Note: Vendor payment terms must comply with the BuyBoard General Terms and Conditions and the Texas Prompt Payment Act (Texas Government Code Ch. 2251). Fob Battle Motors Factory 6 9 Vendor's Internal/Assigned Reference/Quote Number Vendor's Internal/Assigned Reference/Quote Number No response 7 State or Attach Return Policy 0 Note: Only return requirements and processes will be deemed part of Vendor's return policy. Any unrelated contract terms, terms of sale, or other information not specifically related to return requirements and processes included in Vendor's return policy shall not apply to any awarded Contract unless specifically included as a deviation in the Deviation and Compliance Form and accepted by the Cooperative. No response 7 Electronic Payments Are electronic payments acceptable to your company? Yes 7 Credit Card Payments 2 Are credit card payments acceptable to your company? Yes Page 11 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 I Texas Regional Service Designation 3 Texas Regional Service Designation - Refer to Form in Proposal Invitation The Cooperative (referred to as "Texas Cooperative" in this form and in the State Service Designation form) offers vendors the opportunity to service its members throughout the entire State of Texas. If you do not plan to service all Texas Cooperative members statewide, you must indicate the specific regions you will service on this form. If you propose to serve different regions for different products or services included in your Proposal, you must complete and submit a separate Texas Regional Service Designation form for each group of products and clearly indicate the products or services to which the designation applies. By designating a region or regions, you are certifying that you are authorized and willing to provide the proposed products and services in those regions. Designating regions in which you are either unable or unwilling to provide the specified products and services shall be grounds for either rejection of your Proposal or, if awarded, termination of your Contract. Additionally, if you do not plan to service Texas Cooperative members (i.e., if you will service only states other than Texas), you must so indicate on this form. 7 4 Company Name Company Name [_ Bond Equipment Co. 7 Texas Regional Service Designation 5 Select only one of the following options. If you select "I will NOT serve all Regions of Texas", you must then check the individual Regions you wish to serve. I will serve all Regions of Texas 7 Region 1 6 Region 1 - Edinburg ❑ Region I 7 Region 2 7 Region 2 - Corpus Christi ❑ Region 2 7 Region 3 8 Region 3 - Victoria ❑ Region 3 7 Region 4 9 Region 4 - Houston ❑ Region 4 8 Region 5 0 Region 5 - Beaumont ❑ Region 5 8 Region 6 Region 6 - Huntsville ❑ Region 6 8 Region 7 2 Region 7 - Kilgore ❑ Region 7 Page 12 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Region 8 3 Region 8 - Mount Pleasant ❑ Region 8 8 Region 9 4 Region 9 - Wichita Falls ❑ Region 9 8 Region 10 5 Region 10 - Richardson ❑ Region 10 8 Region 11 6 Region 11 - Fort Worth ❑ Region 11 8 Region 12 7 Region 12 - Waco ❑ Region 12 8 Region 13 8 Region 13 - Austin ❑ Region 13 8 Region 14 9 Region 14 - Abilene ❑ Region 14 9 Region 15 0 Region 15 - San Angelo ❑ Region 15 9 Region 16 1 Region 16 - Amarillo ❑ Region 16 9 Region 17 2 Region 17 - Lubbock ❑ Region 17 9 Region 18 3 Region 18 - Midland ❑ Region 18 9 Region 19 4 Region 19 - El Paso ❑ Region 19 Page 13 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 9 Region 20 5 Region 20 - San Antonio ❑ Region 20 9 State Service Designation 6 State Service Designation - Refer to Form in Proposal Invitation. As set forth in the Proposal Invitation, it is the Cooperative's intent that other governmental entities in the United States have the opportunity to purchase goods or services awarded under the Contract, subject to applicable state law, through a piggy -back award or similar agreement through the National Purchasing Cooperative BuyBoard. If you plan to service the entire United States or only specific states, you must complete this form accordingly. (Note: If you plan to service Texas Cooperative members, be sure that you complete the Texas Regional Service Designation form.) In addition to this form, to be considered for a piggy -back award by the National Purchasing Cooperative, you must have an authorized representative sign the National Purchasing Cooperative Vendor Award Agreement that follows this form. If you serve different states for different products or services included in your Proposal, you must complete and submit a separate State Service Designation form for each group of products and clearly indicate the products or services to which the designation applies. By designating a state or states, you are certifying that you are authorized and willing to provide the proposed products and services in those states. Designating states in which you are either unable or unwilling to provide the specified products and services shall be grounds for either rejection of your Proposal or, if awarded, termination of your Contract. 9 7 Company Name Company Name Bond Equipment Co. 9 State Service Designation 8 Select only one of the following options. If you select "I will NOT serve all States", you must then check the individual States you wish to serve. I will serve all states in the United States 9 Alabama 9 Alabama ❑ Alabama 1 Alaska 0 0 Alaska ❑ Alaska 1 Arizona Arizona ❑ Arizona 1 Arkansas 2 Arkansas ❑ Arkansas 1 California 0 California (Public Contract Code 20118 & 20652) 3 ❑ California Page 14 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Colorado U Colorado 4 ❑ Colorado 1 Connecticut 5 Connecticut ❑ Connecticut 1 Delaware 6 Delaware ❑ Delaware 1 District of Columbia 0 District of Columbia 7 ❑ District of Columbia 1 Florida 0 8 Florida 8 ❑ Florida 1 Georgia 9 Georgia ❑ Georgia 1 Hawaii UHawaii ❑ Hawaii 1 Idaho 1 Idaho ❑ Idaho 1 Illinois 1 Illinois s ❑ Illinois 1 Indiana 1 Indiana ❑ Indiana 1 Iowa 4 Iowa ❑ Iowa 1 Kansas 1 Kansas ❑ Kansas Page 15 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Kentucky 1 Kentucky 6 ❑ Kentucky 1 Louisiana 1 Louisiana ❑ Louisiana 1 Maine 8 Maine ❑ Maine 1 Maryland 1 Maryland 9 ❑ Maryland 1 Massachusetts 2 Massachusetts 0 ❑ Massachusetts 1 Michigan 2 Michigan ❑ Michigan 1 Minnesota 2 Minnesota ❑ Minnesota 1 Mississippi 2 Mississippi 3 ❑ Mississippi 1 Missouri 42 Missouri ❑ Missouri 1 Montana 22 Montana ❑ Montana 1 Nebraska 2 6 Nebraska ❑ Nebraska 1 Nevada 2 Nevada ❑ Nevada Page 16 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 New Hampshire 2 New Hampshire 8 ❑ New Hampshire 1 New Jersey 2 New Jersey 9 ❑ New Jersey 1 New Mexico UNew Mexico ❑ New Mexico 1 New York 3 New York ❑ New York 1 North Carolina 3 2 North Carolina ❑ North Carolina 1 North Dakota 3 North Dakota 3 ❑ North Dakota 1 Ohio 3 Ohio ❑ Ohio 1 Oklahoma 3 Oklahoma 5 ❑ Oklahoma 1 Oregon 3 Oregon ❑ Oregon 1 Pennsylvania 3 Pennsylvania ❑ Pennsylvania 1 Rhode Island 3 8 Rhode Island ❑ Rhode Island 1 South Carolina 3 South Carolina 9 ❑ South Carolina Page 17 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 South Dakota 4 South Dakota 0 ❑ South Dakota 1 Tennessee 4 Tennessee ❑ Tennessee 1 Texas 2 Texas ❑ Texas 1 Utah 4 Utah 3 ❑ Utah 1 Vermont 4 Vermont ❑ Vermont 1 Virginia 4 Virginia ❑ Virginia 1 Washington 4 6 Washington ❑ Washington 1 West Virginia 4 West Virginia 7 ❑ West Virginia 1 Wisconsin 4 Wisconsin ❑ Wisconsin 1 Wyoming 4 Wyoming 9 ❑ Wyoming Bid Lines Page 18 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section I: Autocar Vehicles Base Model Price for Autocar ACX 4x2 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 350 HP with Allison 3000 RDS, 5 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 19 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section I: Autocar Vehicles Base Model Price for Autocar ACMD 4x2 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins ISB 200 HP with Allison 3000 RDS transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 20 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section I: Autocar Vehicles Base Model Price for Autocar ACX 6x4 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 350 HP with Allison 3000 RDS transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 21 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section I: Autocar Vehicles Base Model Price for Autocar ACMD 6x4 - Medium Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 300 HP with Allison 3000 RDS, 6 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 22 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 5 Section I: Autocar Vehicles Base Model Price for Autocar DC -64R - Heavy Duty, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins L9 300 HP with Allison 3000 RDS, 6 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 23 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 7 Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 24 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 9 Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 25 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 2: Autocar Model Vehicles OPTIONAL EQUIPMENT and PARTS 0 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 1 Section 3: Autocar Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 1 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 3: Autocar Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 2 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 3: Autocar Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 3 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 26 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 4 Base Model Price for Battle Motors Low Narrow Tilt (LNT) 4x2 — Diesel - Heavy Duty, Low Narrow Tilt Cab, Class 6, 7, and 8, GVWR 26,000 - 66,000 lbs., Cummins B6.7, 200-380 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price:1 $161,880.00 I Total: $161,880.00 Manufacturer: I Battle Motors Manufacturer #: 1167858 1 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 27 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 5 Base Model Price for Battle Motors Low Entry Tilt 2 (LET2) 4x2 — Diesel - Heavy Duty, Low Entry Tilt Cab, Class 7 and 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $175,468.00 I Total: $175,468.00 Manufacturer: Battle Motors Manufacturer #: 167858 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 28 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 6 Base Model Price for Battle Motors Low Entry Tilt 2 (LET2 CC) Crew Cab 4x2 — Diesel - Heavy Duty, Low Entry Tilt Crew Cab, Class 6 - 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3500 RDS transmission, front axle 20,0001bs, tandem rear axle 40,0001bs, complete with all manufacturer's standard equipment No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 29 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 7 Base Model Price for Battle Motors Low Entry Tilt 11 (LET2) 4x2 — CNG - Heavy Duty, Low Entry Tilt Cab, Class 7 and 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 30 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 8 Base Model Price for Battle Motors Low Narrow Tilt (LNT) 4x2 — Electric - Heavy Duty, Low Narrow Tilt Cab, Class 6 - 8, GVWR 26,000 - 54,0001bs, Borg Warner Cascadia Motion HVH410-150, 500 HP, Direct Drive transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $326,886.00 I Total: I $326,886.00 Manufacturer: I Battle Motors Manufacturer #: 1167858 1 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 31 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 4: Battle Motors Vehicles 9 _Base Model Price for Battle Motors Low Entry Tilt II (LET2) 4x2 — Electric - Heavy Duty, Low Entry Tilt Cab, Class 6-8, GVWR 33,000 - 72,0001bs, Borg Warner Cascadia Motion HVH410-150, 500 HP, Two Speed Powershift transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $375,540.00 I Total: I $375,540.00 Manufacturer: I Battle Motors Manufacturer #: 1167858 1 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 32 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 0 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. Total: 10% Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Options Catalog by Model 2 Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 1 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. Total: 0% Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". NO THIRD PARTY OPTIONS CATALOG Page 33 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. Total: 15% Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Battle list price only 2023 2 Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 Discount (%) off all Extended Service Maintenance Agreements. Total: 0% Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Catalog N/A Page 34 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 5: Battle Motors Model Vehicles OPTIONAL EQUIPMENT and PARTS 4 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). Total: 0% Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". Catalog N/A 2 Section 6: Battle Motors Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 5 Service Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate Price: I $176.00 I Total: $176.00 2 Section 6: Battle Motors Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 6 Service Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate Price: I $145.00 I Total: $145.00 2 Section 6: Battle Motors Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 7 Service Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee Price: I $3.85 I Total: $3.85 Page 35 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 7: Chevrolet Vehicles 8 Base Model Price for Chevrolet 4500HD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 36 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 7: Chevrolet Vehicles 9 Base Model Price for Chevrolet 5500HD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 37 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 0 Base Model Price for Chevrolet 6500HD — Regular cab, Duramax 6.6L turbo diesel V8 engine optimized for medium duty applications, 350 horsepower and 700 lb. -ft. of torque, multiple Allison 6 -speed close -ratio transmissions with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 38 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles Base Model Price for Chevrolet LCF 3500 — Low cab forward, regular cab, 6.6L V8 gasoline engine, 6 -speed automatic transmission with double overdrive, 350 horsepower and 425 Ib.-ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 39 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 2 Base Model Price for Chevrolet LCF 4500 — Low cab forward, regular cab, 6.6L V8 gasoline engine, 6 -speed automatic transmission with double overdrive, 350 horsepower and 425 Ib.-ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 40 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 3 Base Model Price for Chevrolet LCF 4500HD — Low cab forward, regular cab, 5.2L turbocharged 1-4 diesel engine, 6 -speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 41 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 4 Base Model Price for Chevrolet LCF 4500XD — Low cab forward, regular cab, 5.2L turbocharged 1-4 diesel engine, 6 -speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 42 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 5 Base Model Price for Chevrolet LCF 5500HD — Low cab forward, regular cab, 5.2L turbocharged 1-4 diesel engine, 6 -speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 43 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 6 Base Model Price for Chevrolet LCF 5500XD — Low cab forward, regular cab, 5.2L turbocharged 1-4 diesel engine, 6 -speed automatic transmission with double overdrive and Power Take -Off (PTO) capability, 215 horsepower and 425 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 44 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 7 Base Model Price for Chevrolet LCF 6500XD — Low cab forward, regular cab, 6.7L Cummins turbo diesel engine, Allison 2550 Rugged Duty Series 6 -speed automatic transmission with double overdrive and Standard Integrated Power Take -Off (PTO) capability, 260 horsepower and 660 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 45 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 7: Chevrolet Vehicles 8 Base Model Price for Chevrolet LCF 7500XD — Low cab forward, regular cab, 6.7L Cummins turbo diesel engine, Allison 2500 Rugged Duty Series 6 -speed automatic transmission with double overdrive and Standard Integrated Power Take -Off (PTO) capability, 260 horsepower and 660 lb. -ft. of torque, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 46 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 3 Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 4 Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS U Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 47 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS 1 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 4 Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 48 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section 8: Chevrolet Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 4 Section 9: Chevrolet Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 4 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 4 Section 9: Chevrolet Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 5 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 4 Section 9: Chevrolet Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 6 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 49 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section 10: Dodge Ram Vehicles 7 Base Model Price for Ram Tradesman 4500 Chassis Regular Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 50 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section 10: Dodge Ram Vehicles 8 Base Model Price for Ram Tradesman 4500 Chassis Crew Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 51 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 4 Section 10: Dodge Ram Vehicles 9 Base Model Price for Ram Tradesman 5500 Chassis Regular Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 52 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 5 Section 10: Dodge Ram Vehicles 0 Base Model Price for Ram Tradesman 5500 Chassis Crew Cab — 6.4L V8, 6 -speed automatic, gasoline engine, 370HP, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 5 1 Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 53 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 5 Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 5 3 Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 54 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 5 Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS 4 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 5 Section 11: Dodge Ram Model Vehicles OPTIONAL EQUIPMENT and PARTS 5 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Page 55 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 5 Section 12: Dodge Ram Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 6 Service Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 5 Section 12: Dodge Ram Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 7 Service Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 5 Section 12: Dodge Ram Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 8 Service Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid 5 Section 13: Ford Vehicles 9 Base Model Price for Ford F-650 SD Pro Loader Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 56 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 13: Ford Vehicles 0 Base Model Price for Ford F-650 SD Pro Loader Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 57 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 13: Ford Vehicles 1 Base Model Price for Ford F-650 SD Straight Frame Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 58 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 13: Ford Vehicles 2 Base Model Price for Ford F-650 SD Straight Frame Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 59 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 13: Ford Vehicles 3 Base Model Price for Ford F-750 SD Straight Frame Chassis Cab - Regular Cab, 7.3L V8 gasoline engine, 335HP, 6 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 60 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 13: Ford Vehicles 4 Base Model Price for Ford F-750 SD Straight Frame Chassis Cab - Regular Cab, 6.7L V8 turbo diesel engine, 300HP, TorqShift HD 10 -speed automatic with double overdrive, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 61 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 5 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 6 Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 6 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 62 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 7 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 6 Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 8 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 63 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 6 Section 14: Ford Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 7 Section 15: Ford Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service U Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 7 Section 15: Ford Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 1 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 7 Section 15: Ford Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 2 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 64 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 3 Base Model Price for Freightliner Model M2-106 - Medium Duty, Cab, Class 6 - 8; Cab and chassis, 66,000# GVW, Eaton 6 speed transmission, 200 HP, front axle 6,0001bs, rear axle 13,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 65 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 4 Base Model Price for Freightliner Model 108SD - Heavy Duty, Cab, Class 7/8, Cab and chassis, 3169,000# GVW, Eaton 9 speed transmission, 520 - 1250 HP, front axle 10,0001bs, rear axle 21,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 66 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 5 Base Model Price for Freightliner Model M2-112 - Heavy Duty, Cab, Class 7/8, and chassis, 52,000# GVW, Detroit DD13 260 - 525 HP at 1625 RPM, Eaton 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 67 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 6 Base Model Price for Freightliner Model M2-112 Natural Gas - Heavy Duty, Cab, Class 7/8, and chassis, 66,000# GVW, Detroit DD13 250 - 320 HP at 1625 RPM, Eaton 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 68 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 7 Base Model Price for Freightliner Model Cascadia 125 - Heavy Duty, Class 8, Cab and chassis, 52,000# GVW, Detroit DD15 350 - 615 HP at 1625 RPM, Eaton FR -15210B 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 69 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 8 Base Model Price for Freightliner Model Natural Gas - Heavy Duty, Class 8, Cab and chassis, 60,600# GVW, Detroit DD15 400 HP at 1625 RPM, Eaton FR -15210B 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 70 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 7 Section 16: Freightliner Vehicles 9 Base Model Price for Freightliner Model 114SD - Heavy Duty, Class 7/8, Cab and chassis, 92,000# GVW, Detroit DD13 260 - 525 HP at 1625 RPM, Eaton FR15210B, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 71 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 16: Freightliner Vehicles 0 Base Model Price for Freightliner Model 114SD Natural Gas - Heavy Duty, Class 7/8, Cab and chassis, 62,000# GVW, Detroit DD13 260 - 400 HP at 1625 RPM, Eaton FR15210B, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 72 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 16: Freightliner Vehicles 1 Base Model Price for Freightliner Model eCascadia - Heavy Duty, Class 8, Cab and chassis, 82,000# GVW, Detroit DD15425 HP (317 kW), Eaton FR -15210B 10 speed transmission, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 73 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 16: Freightliner Vehicles 2 Base Model Price for Freightliner Model eM2 - Medium Duty, Cab, Class 6/7, Typical Range 180 - 250 Miles, Cab and chassis, 26,000 - 33,000# GVW, Class 6 Continuous Horsepower, front axle 6,0001bs, rear axle 13,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 74 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 16: Freightliner Vehicles 3 Base Model Price for Freightliner Model EconicSD - Heavy Duty, Class 8, Cab and chassis, Detroit DDS HP 350, Allison Automatic 3000 series 6 -speed, front axle 12,0001bs, rear axle 40,0001bs, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 75 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 4 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 8 Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 5 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 76 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 6 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 8 Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 7 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 77 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 8 Section 17: Freightliner Model Vehicles OPTIONAL EQUIPMENT and PARTS 8 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 8 Section 18: Freightliner Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 9 Service Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 9 Section 18: Freightliner Model Vehicles Delivery Fees and Labor Rate for Installation and Repair U Service Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 9 Section 18: Freightliner Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 1 Service Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 78 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 9 Section 19: Hino Vehicles 2 Base Model Price for Hino L7 - Medium Duty, Day Cab, 33,000 GVWR, Engine: Cummins B6.7L 260 hp at 2,500 rpm, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 79 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 9 Section 19: Hino Vehicles 3 Base Model Price for Hino L6 - Medium Duty, Day Cab, 23,000 GVWR, Engine: Cummins B6.7L 240 hp at 2,500 rpm, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 80 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 9 Section 19: Hino Vehicles 4 _Base Model Price for Hino XL7 - Medium Duty, Day Cab, 33,000 GVWR, Engine: Cummins L9 300 hp at 2,200 rpm, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 81 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 9 Section 19: Hino Vehicles 5 Base Model Price for Hino XL8 - Medium Duty, Conventional Cab, 33,000 GVWR, Engine: Cummins L9 300 hp at 2,500 rpm, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. H. Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 82 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 9 Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS 7 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response H Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 83 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 9 Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 20: Hino Model Vehicles OPTIONAL EQUIPMENT and PARTS UDiscount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Page 84 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 21: Hino Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 0 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 1 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 21: Hino Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 0 Not to Exceed hourly labor rate for Paint and Body Repair. 2 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 21: Hino Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 0 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 3 Quantity: 1 UOM: Per Mile Delivery Fee No Bid 1 Section 22: International Vehicles 0 Base Model Price for International HV507 4x4 - Severe Duty, Class 6-7, Cummins B6.7 200 hp,10,000 front 4 axle, 17,500 rear axle, air brakes,6 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 85 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 0 Base Model Price for International HV607 6x4 - Severe Duty, Class 8, Cummins L9 260 hp, 10,000# front 5 axle,40,000# rear axle, 10 speed transmission, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 86 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 0 Base Model Price for International MV607 4x2 - Medium Duty, Class 6-7, Cummins B6.7 200 hp, 8000# front 6 axle, hydraulic brakes, 17,500# rear axle, 6 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 87 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 0 Base Model Price for International HV613 - Severe Duty, Class 6-7, International A26 450 hp, 16,000# front 7 axle, 40,000# rear axle, 6 speed transmission, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 88 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 0 Base Model Price for International HV607 4x2 - Severe Duty, Class 6-7, Cummins B6.7 200 hp, 10,000# front 8 axle, 17,500# rear axle, 6 speed transmission, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 89 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles U Base Model Price for International MV60E - Electric, complete with all manufacturer's standard equipment. 9 No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 90 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 1 Base Model Price for International Lonestar - Heavy Duty, Class 8, Cummins X15 565 565 565 hp, 18 speed 0 transmission, 13,200# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 91 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Section 22: International Vehicles Base Model Price for International HX520 - Severe Duty, Class 8, Cummins X15 565 hp, 18 speed transmission, 14,600# front axle, 46,000# rear axle, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 92 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 I 1 2 Section 22: International Vehicles Base Model Price for International HX615 - Severe Duty, Class 8, International A26 430 hp, 6 speed transmission, 20,000# front axle, 46,000# rear axle, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 93 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 1 Base Model Price for International HX620 6x4 - Heavy Duty, Class 8, Cummins X15 450 hp, 10 speed 3 transmission, 12,000# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 94 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 1 Base Model Price for International LT625 6x4 - Heavy Duty, Class 8, International A26 410 hp, 10 speed 4 transmission, 12,000# front axle, 40,000# rear axle, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 95 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 1 Base Model Price for International HV513 4x2 - Heavy Duty, Class 8, International A26 365 hp, 12,000# front 5 axle, 23,000# rear axle, air brakes, 10 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 96 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 1 Base Model Price for International RH613 4x2 - Heavy Duty, Class 8, International A26 370 hp, 12,000# front 6 axle, 23,000# rear axle, 10 speed, air brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 97 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: International Vehicles 7 1 Base Model Price for International CV515 - Medium Duty, Class 4-5, International 6.6 350 hp, Allison automatic,6000# front axle, 10,000# rear axle, hydraulic brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 98 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 1 13 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 1 Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 1 9 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist ricelist MUST be included, or proposal will not be p pg p� 9p� p p considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 99 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 1 Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 1 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 100 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 23: International Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 1 Section 24: International Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 2 Service 3 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 24: International Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 2 Service 4 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 24: International Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 2 Service 5 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 101 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 25: Isuzu Vehicles 2 Base Model Price for Isuzu Cabover NPR - Class 3, Standard Cab, 12,000 GVWR, 6.6L GenV, 8 -Cylinder, 6 Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 102 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 25: Isuzu Vehicles aFsBase Model Price for Isuzu Cabover FTR - Class 6, Standard Cab, 25,950 GVWR, Cummins B6.7L, Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 103 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 2 8 co Section 25: Isuzu Vehicles Base Model Price for Isuzu Cabover FVR - Class 7, Standard Cab, 33,000 GVWR, Cummins B6.7L, Diesel engine 260, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 104 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 2 9 L..a Section 25: Isuzu Vehicles Base Model Price for Isuzu Cabover NRR EV - 235 miles of range both AC and DC fast charging, 19,500 - pound GVWR for powerful Class 5, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 105 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 25: Isuzu Vehicles 3 Base Model Price for Isuzu Cabover NPR -HD — Class 4, Standard Cab, 14,500 GVWR, 5.2L 14 Turbocharged, 0 Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 106 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 25: Isuzu Vehicles 3 Base Model Price for Isuzu Cabover NQR - Class 5, Standard Cab, 17,950 GVWR, 6.6L GMPT L8T GENV, 8- 1 Cylinder, Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 1 3 2 Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 107 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 3 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist rlcelist MUST be included, or proposal will not be p p9 P� Jp� p p considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 3 4 Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 108 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 5 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 26: Isuzu Model Vehicles OPTIONAL EQUIPMENT and PARTS 36 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Page 109 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 27: Isuzu Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 3 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 7 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 27: Isuzu Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 3 Not to Exceed hourly labor rate for Paint and Body Repair. 8 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 27: Isuzu Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 3 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 9 Quantity: 1 UOM: Per Mile Delivery Fee No Bid 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model C500 - Heavy Duty, 150,000 lb. GVWR, Conventional Cab, Cummins 0 ISX 15 Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 110 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model T180 - Medium Duty, 19,000 lb. GVWR, Conventional Cab, PACCAR 1 PX-7 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 111 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model T280 - Medium Duty, 26,000 lb. GVWR, Conventional Cab, PACCAR 2 PX-7 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 112 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model T380 - Medium Duty, Class 7, 33,000 lb. GVWR, Conventional Cab, 3 PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 113 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model T480 - Medium Duty, Class 8, 66,000 lb. GVWR, Conventional Cab, 4 PACCAR PX-7 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 114 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model K270 - Medium Duty, Class 6, 26,000 lb. GVWR, COE Cab, PACCAR 5 PX-7 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 115 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model K270E - Medium Duty, Class 6, 26,000 lb. GVWR, Hydraulic 55 Degree 6 Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batteries - 200 -mile range, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 116 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model K370 - Medium Duty, Class 7, 33,000 lb. GVWR, Hydraulic 55 Degree 7 Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batterie, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 117 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model K370E - Medium Duty, Class 7, 33,000 lb. GVWR, Hydraulic 55 Degree 8 Tilting Steel Cab, HV2600, 355HP Emotor, Two PACCAR 700 CCA Batteries - 200 mile range, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 118 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 4 Base Model Price for Kenworth Model T680 - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, 9 PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 119 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model T680 FCEV - Heavy Duty, Class 8, 82,000 lbs Max GVWR, Conventional 0 Cab, Toyota's 310kW Dual Motor Assembly/415 Hp and Gen 2 Dual Fuel Cell Module, 58.8 Kg Hydrogen Storage, 450 Miles of Range, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 120 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model T680E - Heavy Duty, Class 8, Conventional Cab, 396 kWh battery, 1 CCS1 DC Fast Charging, 150 Miles of Range, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 121 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model T800 - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, 2 PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 122 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model T880 - Medium Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, 3 PACCAR MX -13 Diesel Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 123 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model W900L - Heavy Duty, Class 8, 33,001+ lb. GVWR, Conventional Cab, 4 Extended Hood, Cummins X15 Engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 124 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 28: Kenworth Vehicles 5 Base Model Price for Kenworth Model W990 - Heavy Duty, Conventional Cab, PACCAR MX -13 Engine, 5 complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 1 5 6 Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 125 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS 5 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 5 8 Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 126 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 29: Kenworth Model Vehicles OPTIONAL EQUIPMENT and PARTS UDiscount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Page 127 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 30: Kenworth Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 6 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 1 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 30: Kenworth Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 6 Not to Exceed hourly labor rate for Paint and Body Repair. 2 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 30: Kenworth Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 6 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 3 Quantity: 1 UOM: Per Mile Delivery Fee No Bid 1 Section 31: Mack Vehicles 6 Base Model Price for Mack Granite - Heavy Duty, Class 8, 35,000 - 92,000+ GVW, Mack MP7 engine, 325 - 505 4 HP, day cab, Eaton -Fuller Manual Transmission, front axle Mack UniMax Axles with Integrated Hub, Drive Axles Mentor "S" Cam Q -Plus Brakes, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 128 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 6 Base Model Price for Mack TERRAPRO - Heavy Duty, Class 8, 35,000 - 81,000+ GVW, Mack MP7 engine, 325 - 5 505 HP, day cab, mDRIVE HD and XHD Transmission, front axle Mack UniMax, Drive Axles Mack O150/151 Series, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 129 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 22: Mack Vehicles 6 Base Model Price for Mack LR - Heavy Duty, Class 8, Low Entry Cabover, 43,000 - 72,000 GVW, Mack MP7 6 engine, 320-355 HP, Allison 4500 Series transmission, front axle Mack FXL20, rear axle Mack C150/151 Axle Carriers, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 130 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 6 Base Model Price for Mack LR Electric - Heavy Duty, Low Entry Cabover, 66,000 lbs GVWR, 2 AC motors with 7 400kW Peak (536 hp) & 334 kW (448 hp) continuous power, 4 NMC lithium -ion batteries, 600V, Up to 150kW charge power with max current of 200A, 550-750 volts charging system, Allison 4500 Series transmission, front axle Mack FXL20, rear axle Mack S462R, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 131 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 6 Base Model Price for Mack Pinnacle - Heavy Duty, Class 8, 35,000 - 62,000 GVW, Mack MP8 engine, day cab, 8 415-505 HP, Maxitorque ES transmission, S38/40 Series Axle, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 132 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 6 Base Model Price for Mack MD Series - Heavy Duty, Cummins B6.7 Engine, 220hp/600 lb. ft, Allison 2500HS 6- 9 speed transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 133 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 7 Base Model Price for Mack MD Electric - Heavy Duty, Class 6, NMC Battery packs, CCS1 Charging, 140 miles 0 (2 batteries) max range, 150 KWH battery capacity (2 batteries), 260 Peak HP, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 134 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 31: Mack Vehicles 7 Base Model Price for Mack Anthem - Heavy Duty, Class 8, 35,000 - 62,000 GVW, MP7 Engine, 415 - 505 HP, 1 day cab, Eaton-Fuler transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 1 7 2 Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 135 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 7 4 Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 136 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS 5 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 32: Mack Model Vehicles OPTIONAL EQUIPMENT and PARTS 6 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 137 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 33: Mack Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 7 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 7 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 33: Mack Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 7 Not to Exceed hourly labor rate for Paint and Body Repair. 8 Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 33: Mack Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 7 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 9 Quantity: 1 UOM: Per Mile Delivery Fee No Bid 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsubushi Cabover TV - Heavy Duty, 33,500 GVW, 4 -stroke cycle, water cooled direct 0 injection, turbocharged diesel engine, G330 -12K, Electronic -automated unsynchronized transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 138 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsubushi Cabover Canter - Light Duty, 6,500 GVW, 4V21 engine, Synchromesh 1 manual transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 139 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 8 2 Section 34: Mitsubushi Vehicles Base Model Price for Mitsbushi Cabover FA/FI - Medium Duty, 9,600 GVW, Compression Ignition,4 Stroke, Direct injection, Turbo charged diesel engine, MO36S6, Mechanical, 6 forward + 1 reverse transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 140 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsbushi Cabover Fighter - Medium Duty, 7.5t GVW, 4V20 Intercooler Turbo engine, 3 complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehic►es at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 141 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsbushi Cabover FJ - Heavy Duty, 25,000 GVW, Compression Ignition, 4 Stroke, 4 Direct Injection, Turbo charged inter cooled engine, G85 Synchromesh type 6 Forward + 1 Reverse manual transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 142 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsbushi Cabover FO - Heavy Duty, 31,000 Max GVW, 4 -stroke cycle, water cooled 5 direct injection, turbocharged diesel engine, 9 -speed manual transmission, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 143 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 34: Mitsubushi Vehicles 8 Base Model Price for Mitsbushi Cabovere Canter Electric - Light Duty, GVW 6t Class, Standard cab, all 6 electric, S Battery, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 1 8 7 Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 144 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS 8 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 8 9 Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 145 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 0 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 1 Section 35: Mitsubushi Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 146 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 36: Mitsubushi Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 9 Service 2 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 36: Mitsubushi Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 9 Service 3 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 1 Section 36: Mitsubushi Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 9 Service 4 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid 1 Section 37: Peterbilt Vehicles 9 Base Model Price for Peterbilt Model 220 - Medium Duty, Cab over engine, Paccar PX7 engine, 220 HP, Allison 5 2500 HS transmission, 26,000 GVWR, front gross axle weight 12,000 lbs., rear gross axle weight 17,000-21,000 lbs., complete with all manufacturer's standard equipment. No Bid Manufacturer: I No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 147 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 37: Peterbilt Vehicles 9 Base Model Price for Peterbilt Model 520 - Heavy Duty, Cab over engine, Paccar PX9 350 HP, 3000 RDS 6 transmission, 57.6" BBC, 33,000 GVWR, front gross axle weight 12,000-22000 lbs., rear gross axle weight 23,000-46- lbs., complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 148 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 37: Peterbilt Vehicles 9 Base Model Price for Peterbilt Model 365 - Heavy Duty, Conventional cab, Paccar MX13, 455 HP, Fuller 10 7 transmission, front gross axle weight 12,000-22,0001bs, rear gross axle weight 21,000-70,0001bs, 33,000 GVWR, 115" BBC, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 149 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 37: Peterbilt Vehicles 9 Base Model Price for Peterbilt Model 367 - Heavy Duty, Conventional cab, Paccar MX13, 455 HP, Fuller 10 8 transmission, front gross axle weight 12,000-22,0001bs, rear gross axle weight 21,000-70,0001bs, 52,000 GVWR, 123" BBC, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 150 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 1 Section 37: Peterbilt Vehicles 9 Base Model Price for Peterbilt Model 389 - Heavy Duty Conventional cab, Paccar MX -13 engine, 455 HP, Fuller 9 10 speed transmission, front gross axle weight 12,000 lbs., rear gross axle weight 38,000 lbs., 50,000 GVWR, 123" BBC, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 151 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 37: Peterbilt Vehicles U Base Model Price for Peterbilt Model 589 - Heavy Duty, Engine PACCAR MX -13, Transmissions PACCAR TX - 12, Front Axle PACCAR, Dana, Meritor, Rear Axle PACCAR, Dana, Meritor, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 152 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 0 1 Section 37: Peterbilt Vehicles Base Model Price for Peterbilt Model 548 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31 k, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 153 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 37: Peterbilt Vehicles U Base Model Price for Peterbilt Model 567 - Medium Duty, Conventional Areo cab vocational unit, Paccar MX13 2 engine, 455 HP, Fuller 10 speed transmission, front gross axle weight 12,000-22,000 lbs., rear gross axle weight 21,000-70,000 lbs., 33,000 and up GVWR, 115" BBC, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 154 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 0 3 Section 37: Peterbilt Vehicles Base Model Price for Peterbilt Model 537 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31 k, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 155 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 0 4 Section 37: Peterbilt Vehicles Base Model Price for Peterbilt Model 536 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31 k, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 156 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 0 5 Section 37: Peterbilt Vehicles Base Model Price for Peterbilt Model 535 - Medium Duty, Transmission PACCAR 8 -Speed Automatic Transmission, Front Axle PACCAR 20K, Rear Axle All Current Carry Over, Rear Suspension Single Drive: 13.5k — 31 k, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 157 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 37: Peterbilt Vehicles 0 Base Model Price for Peterbilt Model 579 - Heavy Duty, Aero cab, Paccar MX -13 engine, 455 HP, Paccar 12- 6 Speed Auto transmission, front gross axle weight 12,000-20,000 lbs., rear gross axle weight 38,000-46,000 lbs., 50,000 GVWR, 117" BBC, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 158 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS 07 Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 2 Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS U $(not Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party OEM) specification sheets and upgrade options catalog/pricelist ricelist MUST be included, or proposal will not be p pg p� 9p� p p considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 159 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS 9 Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 2 Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS UDiscount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 160 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 38: Peterbilt Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NOTE: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response 2 Section 39: Peterbilt Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 1 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 2 Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 39: Peterbilt Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 1 Not to Exceed hourly labor rate for Paint and Body Repair. 3 Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 39: Peterbilt Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 1 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 4 Quantity: 1 UOM: Per Mile Delivery Fee No Bid Page 161 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 1 Base Model Price for Volvo VNL - Heavy Duty, 122.4" BBC, 50,000 GVW, Fuller 10 speed transmission, D13 5 engine, conventional cab, tandem axle, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 162 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 1 Base Model Price for Volvo VNX - Heavy Duty 122.4" BBC, 50,000 GVW, Fuller 10 speed transmission, O13 6 engine, conventional cab, tandem axle, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 163 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 7 1 Base Model Price for Volvo VNR - Heavy Duty 113" BBC, 33,000 GVW, Fuller 10 speed transmission, D11 engine, conventional cab, single axle, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 164 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 1 Base Model Price for Volvo VNR Electric - Up to 230 miles, Up to 33,000 GVW, complete with all 8 manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 165 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 1 Base Model Price for Volvo VAH - Heavy Duty 113.6" Daycab designed to provide outstanding performance for 9 urban deliveries. Volvo D11 325-425 hp 1250-1550 lb.- ft. Volvo I -Shift - 12 speed Eaton - 10 speed, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 166 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 40: Volvo Vehicles 2 Base Model Price for Volvo VHD - Heavy Duty Volvo D11 325-425 hp 1250-1550 lb -ft. Volvo D13 405-500 hp 0 1450-1900 Ib-ft, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 2 2 1 Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 167 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 2 3 Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 168 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS 4 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 41: Volvo Model Vehicles OPTIONAL EQUIPMENT and PARTS 2 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". No response Page 169 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 42: Volvo Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 2 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. 6 Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 42: Volvo Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 2 Not to Exceed hourly labor rate for Paint and Body Repair. 7 Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 42: Volvo Model Vehicles Delivery Fees and Labor Rate for Installation and Repair Service 2 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. 8 Quantity: 1 UOM: Per Mile Delivery Fee No Bid 2 Section 43: Western Star Vehicles 2 Base Model Price for Western Star 47X - Medium Duty, Engine Displacement 9L to 13L Horsepower/ Torque 9 260/860 to 525/1,850, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 170 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 43: Western Star Vehicles 3 Base Model Price for Western Star 49X - Medium Duty, Engine Displacement 12L to 16L Horsepower/ 0 Torque 350/1,350 to 605/2,050, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 171 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 43: Western Star Vehicles 3 Base Model Price for Western Star 57X - Heavy Duty, Engine Detroit DD13 Gen 5 370-525 HP, 1250-1850 lb. -ft, 1 Transmission Detroit DT12 Direct and Overdrive AMT, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 2 3 2 Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Options. Manufacturer specification sheets and upgrade options catalog/pricelist MUST be included, or proposal will not be considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 172 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 3 Discount (%) off all Third Party Options (not OEM) and Unpublished Options and Equipment. Third Party (not OEM) specification sheets and upgrade options catalog/pricelist rlcelist MUST be included, or proposal will not be p p9 P� Jp� p p considered. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 3 4 Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS Discount (%) off all Original Equipment Manufacturer (OEM) Parts. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Page 173 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 5 Discount (%) off all Extended Service Maintenance Agreements. No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response 2 Section 44: Western Star Model Vehicles OPTIONAL EQUIPMENT and PARTS 3 Discount (%) off all Floor Plan Insurance and Lot Insurance (dealer inventory vehicles and upfitting vehicles). No Bid Item Notes: PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a CO LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Vendors proposing multiple manufacturer product lines and/or catalog/pricelist per line item must submit the information as follows or proposal may not be considered: • Select "Add Alternate" for each additional manufacturer product line and/or catalog/pricelist proposed • Vendor's must list one specific percentage discount for each manufacturer and/or catalog/pricelist listed Item Attributes 1. State Name of Catalog/Pricelist Proposed with Discount Percentage NO E: Do not include SKU, Reference Numbers, Websites, and/or "See Attached/Enclosed". T No response Page 174 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 45: Western Star Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 3 Service 7 Not to Exceed hourly labor rate for Medium and Heavy -Duty Truck Installation and or Repair Service. Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 45: Western Star Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 3 Service 8 Not to Exceed hourly labor rate for Paint and Body Repair. Quantity: 1 UOM: Hourly Labor Rate No Bid 2 Section 45: Western Star Model Vehicles Delivery Fees and Labor Rate for Installation and Repair 3 Service 9 Not to Exceed per mile delivery fee for Medium and Heavy -Duty Trucks. Quantity: 1 UOM: Per Mile Delivery Fee No Bid 2 Section 1: Autocar Vehicles (Addendum No. 1) 4 Base Model Price for Autocar ACTT 4x2 — Terminal tractor, Cabover style, Cab and chassis, Low Cab Forward 0 (LCF), Cummins B6.7 200 HP with Allison 3000 RDS, 4 speed transmission, diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: I No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 175 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 4 1 Section 1: Autocar Vehicles (Addendum No. 1) Base Model Price for Autocar ACTT 6x4 — Terminal tractor, Cabover style, Cab and chassis, Low Cab Forward (LCF), Cummins B6.7 200 HP with Allison 3000 RDS, 4 speed transmission, diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 176 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 4: Battle Motors Vehicles (Addendum No. 1) 4 Base Model Price for Battle Motors Low Narrow Tilt (LNT) 6x4 — Diesel - Heavy Duty, Low Narrow Tilt Crew 2 Cab, Bas 6 - 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3500 RDS transmission, front axel 20,0001bs, tandem rear axle 40,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $187,023.00 I Total: $187,023.00 Manufacturer: Battle Motors Manufacturer #: 167858 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 177 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 4: Battle Motors Vehicles (Addendum No. 1) 4 Base Model Price for Battle Motors Low Entry Tilt 2 (LET2) 6x4 — Diesel - Heavy Duty, Low Entry Tilt Cab, 3 Class 7 and 8, GVWR 46,000 - 72,000 lbs., Cummins L9, 300 - 430 HP engine, Allison 3000 RDS transmission, front axle 20,0001bs,single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $189,356.00 I Total: I $189,356.00 Manufacturer: Battle Motors Manufacturer #: 167858 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 178 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 4: Battle Motors Vehicles (Addendum No. 1) 4 Base Model Price for Battle Motors Low Narrow Tilt (LNT) 6x4 — Electric - Heavy Duty, Low Narrow Tilt Cab, 4 Class 6 - 8, GVWR 26,000 - 54,0001bs, Borg Warner Cascadia Motion HVH410-150, 500 HP, Direct Drive transmission, front axle 20,0001bs, single rear axle 26,000lbs, complete with all manufacturer's standard equipment. Unit Price: I $399,083.00 I Total: I $399,083.00 Manufacturer: I Battle Motors Manufacturer #: 1167858 1 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 179 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 4: Battle Motors Vehicles (Addendum No. 1) 4 Base Model Price for Battle Motors Low Entry Tilt II (LET2) 6x4 — Electric -Heavy Duty, Low Entry Tilt Cab, 5 Class 6-8, GVWR 33,000 - 72,0001bs, BorgWarner Cascadia Motion HVH410-150, 500 HP, Two Speed Powershift transmission, front axle 20,0001bs, single rear axle 26,0001bs, complete with all manufacturer's standard equipment. Unit Price: I $384,786.00 I Total: I $384,786.00 Manufacturer: I Battle Motors Manufacturer #: 1167858 1 Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 180 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 19: Hino Vehicles (Addendum No.1) 4 Base Model Price for HINO L6 - Medium Duty, Day Cab, 23,000 GVWR, Engine: Cummins B6.7L 260 hp at 6 2,500 rpm, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 181 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 19: Hino Vehicles (Addendum No.1) Ia e Model Price for HINO M4 - Day Cab, 14,500 GVWR, Engine: JO5E-tp 5 -liter diesel, Type: Diesel 4 -cycle, 4 cylinder in line, 21 0HP at 2,500RPM, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/price►ist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 182 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 19: Hino Vehicles (Addendum No.1) 4 Base Model Price for HINO M5 - Day Cab, 19,500 GVWR, Engine: JO5E-tp 5 -liter diesel, Type: Diesel 4 -cycle, 4 8 cylinder in, 210HP at 2,500RPM, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 183 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 4 Base Model Price for Isuzu Cabover NPR - Class 3, Crew Cab, 12,000 GVWR, 6.6L GenV, 8 -Cylinder, 9 Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 184 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NPR -HD - Class 4, Standard Cab, 14,500 GVWR, 6.6L GenV, 8- Cylinder, Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 185 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NPR -HD - Class 4, Crew Cab, 14,500 GVWR, 6.6L GenV, 8 -Cylinder, 1 Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 186 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NQR - Class 5, Crew Cab, 17,950 GVWR, 6.6L GMPT L8T GENV, 8 - Cylinder, Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 187 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NPR -XD — Class 4, Standard Cab, 16,000 GVWR, 5.2L 14 Turbocharged, 3 Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 188 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NPR -XD — Class 4, Crew Cab, 16,000 GVWR, 5.2L 14 Turbocharged, 4 Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 189 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NRR — Class 5, Standard Cab, 19,500 GVWR, 6.6L GMPT L8T GENV, 8 - Cylinder, Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 190 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1 5 Base Model Price for Isuzu Cabover NRR — Class 5, Crew Cab, 19,500 GVWR, 6.6L GMPT L8T GENV, 8 - Cylinder, Gasoline engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 191 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NRR — Class 5, Standard Cab, 19,500 GVWR, 6.6L GM T L8T GENV, 8 - Cylinder, Deisel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 192 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NRR — Class 5, Crew Cab, 19,500 GVWR, 5.2L 14 Turbocharged, Diesel $ engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 193 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 5 Base Model Price for Isuzu Cabover NQR - Class 5, Standard Cab, 17,950 GVWR, 5.2L 14 Turbocharged, 9 Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 194 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 6 Base Model Price for Isuzu Cabover NQR - Class 5, Crew Cab, 17,950 GVWR, 5.2L 14 Turbocharged, Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 195 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 6 Base Model Price for Isuzu Cabover FVR - Class 6 De -rated, Standard Cab, 25,950 GVWR, Cummins B6.7L, 1 Diesel engine 260, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 196 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 6 Base Model Price for Isuzu Cabover FVR - Class 6 De -rated, Crew Cab, 25,950 GVWR, Cummins B6.7L, 2 Diesel engine 260, complete with all manufacturer's standard equipment No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COM LETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. Page 197 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 2 Section 25: Isuzu Vehicles (Addendum No. 1) 6 Base Model Price for Isuzu Cabover NPR -HD — Class 4, Crew Cab, 14,500 GVWR, 5.2L 14 Turbocharged, 3 Diesel engine, complete with all manufacturer's standard equipment. No Bid Manufacturer: No response Manufacturer #: I No response Item Notes: PROPOSAL NOTE 1: Vendors proposing must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation shall submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions in which equipment may be sold. Manufacturers responding directly to this proposal invitation, in lieu of an authorization letter, must submit a letter explaining that the company is the manufacturer of the products proposed. PROPOSAL NOTE 2: A Vendor in Texas must have and maintain for the life of the Contract any Franchise Motor Vehicle Dealer Certificate and/or other license/certificate as required by the Texas Department of Motor Vehicles. If Vendor proposes to serve states other than Texas, Vendor must have any and all licenses or certificates, including franchise motor vehicle dealer certificates or licenses required by each state the Vendor proposes to serve. Proposers responding to this Proposal Invitation should submit a copy of their dealer certificate(s) and/or license(s). PROPOSAL NOTE 3: Vendors should propose direct replacement models if a vehicle/truck model specified below has been discontinued by the manufacturer. All vehicle ancillary fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. applicable state inspection, state title, state registration, dealer document fees, pre -delivery inspection, make ready, and manufacturer destination fees) are to be included in the base model price(s). Vehicle fees not included in the base model price(s) will not be permitted. The Cooperative service fee for vehicles is not a "vehicle fee" and is not to be included in the base price. Dealer Floor Plan and Lot Insurance costs will only be allowed for inventory vehicles at the dealer location and/or vehicles scheduled for upfitting by the dealer. These Floor Plan and Lot Insurance fees shall not be included in the price of a vehicle for the purpose of this proposal but must be listed separately as a line item price on individual quotes for any potential Cooperative member purchase. PROPOSAL NOTE 4: Vehicle Optional Equipment will be selected by the Cooperative member at the time of quote/order. Vendors shall submit a COMPLETE catalog(s)/pricelist(s) OF ALL OPTIONAL EQUIPMENT AND PARTS with their Proposal response or the Proposal will not be considered. Vendors shall submit catalog(s)/pricelist(s) in a readily available and readable electronic format, with Excel or searchable PDF preferred. No paper catalogs or manufacturer/vendor websites will be accepted. 2 Line deleted as part of an Addendum 6 4 2 Line deleted as part of an Addendum 6 5 Response Total: $2,200,346.85 Page 198 of 198 pages Vendor: Bond Equipment Company 723-23 Addendum 1 H > H o r4 A d a Q rJ)air X o WRi.N A a rlj Y U I- > CD a) v CD U N CD U UU I- > CD a) 0 0 a CD Cfl O V U V V U 0 DocuSign Envelope ID: FBE2B6FF-8CB0-422F-97BF-56685309F619 BATTLE MOTORS To BuyBoard, 12007 Research Blvd, Austin, TX 78759, Contract # 723-23, Bond Equipment Company, Inc., is an authorized dealer of Battle Motors products. David Raglin DocuSigned by: 49A19B70877A440A... Vice President of Sales — Southwest dra lg in(c�battlemotors.com 918.605.4972 BATTLE MOTORS AUTHORIZED DEALER Fj—YoNv,rQu.rPmrN—T] BATTLE MOTORS 1951 Reiser Avenue SE, New Philadelphia, OH 44663 p 888.328.5443 www.BattleMotors.com Exhibit C - Conflict of Interest Questionnaire CONFLICT OF INTEREST QUESTIONNAIRE FORM CIQ For vendor doing business with local governmental entity This questionnaire reflects changes made to the law by H.B. 23, 84th Leg., Regular Session. OFFICE USE ONLY This questionnaire is being filed in accordance with Chapter 176, Local Government Code, by a vendor who has a business relationship as defined by Section 176.001(1-a) with a local governmental entity and the Date Received vendor meets requirements under Section 176.006(a). By law this questionnaire must be filed with the records administrator of the local governmental entity not later than the 7th business day after the date the vendor becomes aware of facts that require the statement to be filed. See Section 176.006(a-1), Local Government Code. A vendor commits an offense if the vendor knowingly violates Section 176.006, Local Government Code. An offense under this section is a misdemeanor. t Name of vendor who has a business relationship with local governmental entity. 2 ❑ Check this box if you are filing an update to a previously filed questionnaire. (The law requires that you file an updated completed questionnaire with the appropriate filing authority not later than the 7th business day after the date on which you became aware that the originally filed questionnaire was incomplete or inaccurate.) 3 Name of local government officer about whom the information is being disclosed. Name of Officer 4 Describe each employment or other business relationship with the local government officer, or a family member of the officer, as described by Section 176.003(a)(2)(A). Also describe any family relationship with the local government officer. Complete subparts A and B for each employment or business relationship described. Attach additional pages to this Form CIQ as necessary. A. Is the local government officer or a family member of the officer receiving or likely to receive taxable income, other than investment income, from the vendor? Yes ® No B. Is the vendor receiving or likely to receive taxable income, other than investment income, from or at the direction of the local government officer or a family member of the officer AND the taxable income is not received from the local governmental entity? LII Yes �No Describe each employment or business relationship that the vendor named in Section 1 maintains with a corporation or other business entity with respect to which the local government officer serves as an officer or director, or holds an ownership interest of one percent or more. 6 ❑Check this box if the vendor has given the local government officer or a family member of the officer one or more gifts as described in Section 176.003(a)(2)(B), excluding gifts described in Section 176.003(a-1). 7 g -t3-26 Signal of vendor doing business wi the governmental entity Date Form prkvide> Texas Ethics Commission www.ethics.state.tx.us Revised 1/1/2021 General Discussion Certifications1 r Attachments1 r Authors & Reviewers P Routing Summary (This is a read only summary view of the M&C) City of Fort Worth, Texas Mayor and Council Communication DATE: 05/12/26 LOG NAME: 13P BLANKET COOPERATIVE AUTHORIZATION FLEET ACQUISITIONS CAH CONSENT: Consent (ALL) Authorize Execution of Non -Exclusive Agreements with Multiple Vendors for the Purchase of Fleet Vehicles and Off -Road and Other Motorized Equipment Up to the Amount of Available Funding Capital Projects Across Multiple Funds Citywide Using Cooperative Contracts and Interlocal Agreements for One Year for the Financial Management Services Department I It is recommended that the City Council authorize execution of non-exclusive agreements with multiple vendors for the purchase of fleet vehicles, off -road and other motorized equipment up to the amount of available funding in capital projects across multiple funds citywide using cooperative contracts and interlocal agreements for one year for the Financial Management Services Department. DISCUSSION: The purpose of this Mayor & Council Communication (M&C) is to authorize a one-year blanket approval to execute non-exclusive cooperative purchasing agreements and interlocal agreements with multiple vendors. The City routinely receives a high volume of vehicle and equipment purchase requests within tight timeframes, often compounded by limited vendor availability. Absent a blanket authorization, these concurrent demands can create procurement bottlenecks and result in delays of acquiring critical vehicles and equipment. Establishing a blanket M&C enables the Financial Management Services Department to respond more efficiently to departmental needs, secure available inventory in a timely manner, and mitigate the risk of a new backlog that could disrupt daily operations across City departments. Approval of this M&C will enable the Fleet Stirke Force (FSF) to continue supporting the daily needs of the City while ensuring the timely acquisition of essential vehicles and equipment needed to support operations. IThe following vendors and cooperative purchasing agencies are actively utilized to procure vehicles and equipment. These partnerships have been instrumental in advancing procurement efforts and sustaining critical operations across the City. VENDOR COOPERATIVE AGENCY Siddons Martin Emergency Group, LLC BuyBoard, Houston -Galveston Area Council (HGAC) RDO Equipment Sourcewell Versalift Sourcewell Lake Country Chevrolet The Interlocal Purchasing System (TIPS) North Texas Trailers, LLC BuyBoard Silsbee Ford The Interlocal Purchasing System (TIPS) Associated Supply Company (ASCO) BuyBoard Zimmerer Kubota Sourcewell Interstate Trailers, LLC BuyBoard American Golf Cars BuyBoard Professional Turf Products BuyBoard Silsbee Toyota The Interlocal Purchasing System (TIPS) Kirby Smith Machinery BuyBoard Ditch Witch Sourcewell Munson Boats G neral Services Administration (GSA) Industrial Power, LLC Houston -Galveston Area Council (HGAC) Sam Packs Five Star Ford, LTD BuyBoard Core and Main, LP dba Green Equipment Co. Sourcewell Donalson CDJR The Interlocal Purchasing System (TIPS) MHC Kenworth Sourcewell COOPERATIVE PURCHASE - State law provides that local government purchasing an item under a cooperative purchasing agreement satisfies state laws requiring that the local government seek competitive bids for purchase of the item. ADMINISTRATIVE CHANGE ORDERS - An administrative change order or increase may be made by the City Manager or his designee up to the amount allowed by relevant Law and the Fort Worth City Code and does not require specific City Council approval as long as sufficient funds have been appropriated. SMALL BUSINESS - A Small Business goal has not been assigned to this contract because a waiver has been approved by the Property Management Department's Assistant City Manager, on behalf of the Financial Management Services Department, in accordance with the City's Small Business Ordinance. FUNDING - Currently, there is $41,568,886.00 in the City's budget in capital projects across multiple funds citywide for the purpose of funding fleet acquisitions. Prior to each purchase agreement or contract being executed, staff will confirm that funding is available for that purchase and is appropriated for that purpose. All existing contracts shall be amended or terminated to release encumbered funds to ensure that the City is able to make purchases with the vendors that have needed items available for purchase on a rolling basis. No guarantee has been or will be made to any vendor regarding minimum purchases. This agreement will serve ALL COUNCIL DISTRICTS. FISCAL INFORMATION / CERTIFICATION: The Director of Finance certifies that funds are available in the current capital budgets, as previously appropriated, in the Vehicle and Equip Replacement Fund, W&S Capital Projects Fund, Stormwater Capital Projects Fund, Municipal Airport Capital Proj Fund, Solid Waste Capital Projects Fund, CCPD Capital Projects Fund, Fleet Capital Projects Fund, Environmental Prot Cap Proj Fund, Tax Notes Series 2023 Fund, Tax Notes Series 2024 Fund, Justice Asset Forfeitu Capital Fund, Certificate of Obligation 2023 Fund and Tax Notes 2025B Fund for various projects to support the approval of the above recommendation for the purchase of vehicles and equipment. Prior to any expenditures being incurred, the Financial Management Services Department has the responsibility to validate the availability of funds. Submitted for City Manager's Office by_ Reginald Zeno 8517 Valerie Washington 6192 FORT WORTH. City Secretary's Office Contract Routing & Transmittal Slip Contractor's Name: Subject of the Agreement: M&C Approved by the Council? * Yes ❑ No ❑ If so, the M&C must be attached to the contract. Is this an Amendment to an Existing contract? Yes 0 No 0 If so, provide the original contract number and the amendment number. Is the Contract "Permanent"? *Yes ❑ No ❑ If unsure, see back page for permanent contract listing. Is this entire contract Confidential? *Yes ❑ No ❑ If only specific information is Confidential, please list what information is Confidential and the page it is located. Effective Date: Expiration Date: If different from the approval date. If applicable. Is a 1295 Form required? * Yes ❑ No ❑ *If so, please ensure it is attached to the approving M&C or attached to the contract. Project Number: If applicable. *Did you include a Text field on the contract to add the City Secretary Contract (CSC) number? Yes 0 No 0 Contracts need to be routed for CSO processing in the following order: 1. Katherine Cenicola (Approver) 2. Jannette S. Goodall (Signer) 3. Allison Tidwell (Form Filler) *Indicates the information is required and if the information is not provided, the contract will be returned to the department. Permanent Contracts Advanced Funding Agreements Architect Service Community Facilities Completion Agreement Construction Agreement Credit Agreement/ Impact Fees Crossing Agreement Design Procurement Development Agreement Drainage Improvements Economic Development Engineering Services Escrow Agreement Interlocal Agreements Lake Worth Sale Maintenance Agreement/Storm Water Parks/Improvement Parks/Other Amenities Parks/Play Equipment Project Development Property/Purchase (Property owned by the City) Property/Sales (Property owned by the City) Property/Transfers (Property owned by the City) Public Art Sanitary Sewer Main Replacements Sanitary Sewer Rehabilitations Settlements (Employees Only) Streets/Maintenance Streets/Redevelopment Streets/Repairs Streets/Traffic Signals Structural Demolition (City owned properties) Utility Relocation Water Reclamation Facility Water/Emergency Repair Water/Interceptor Water/Main Repairs Water/Main Replacement Water/Sanitary Sewer Rehabilitation Water/Sewer Service Water/Storage Tank