Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
Contract 46915
I 4 2015 CITY SECRETAWJ I CONTRACT NO. 4 G��yIOov, ORS R�� CITY OF FORT WORTH, TEXAS G STANDARD AGREEMENT FOR ENGINEERING RELATED DESIGN SERVICES This AGREEMENT is between the City of Fort Worth, a Texas home-rule municipality (the "CITY"), and Kimley-Horn and Associates, Inc., authorized to do business in Texas, (the "ENGINEER"), for a PROJECT generally described as: Traffic Signal Bid Package 2015-3. Article I Scope of Services A. The Scope of Services is set forth in Attachment A. Article II Compensation A. The ENGINEER's compensation shall be in an amount hourly not-to-exceed $43,734.00 as set forth in Attachment B. Article III Terms of Payment Payments to the ENGINEER will be made as follows: A. Invoice and Payment (1) The Engineer shall provide the City sufficient documentation, including but not limited to meeting the requirements set forth in Attachment D to this AGREEMENT, to reasonably substantiate the invoices. (2) The ENGINEER will issue monthly invoices for all work performed under this AGREEMENT. Invoices are due and payable within 30 days of receipt. (3) Upon completion of services enumerated in Article I, the final payment of any balance will be due within 30 days of receipt of the final invoice. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 1 of 16 OFFICIAL RECORD CITY SECRETARY FT.WoRTN,TX (4) In the event of a disputed or contested billing, only that portion so contested will be withheld from payment, and the undisputed portion will be paid. The CITY will exercise reasonableness in contesting any bill or portion thereof. No interest will accrue on any contested portion of the billing until mutually resolved. (5) If the CITY fails to make payment in full to ENGINEER for billings contested in good faith within 60 days of the amount due, the ENGINEER may, after giving 7 days' written notice to CITY, suspend services under this AGREEMENT until paid in full. In the event of suspension of services, the ENGINEER shall have no liability to CITY for delays or damages caused the CITY because of such suspension of services. Article IV Obligations of the Engineer Amendments to Article IV, if any, are included in Attachment C. A. General The ENGINEER will serve as the CITY's professional engineering representative under this Agreement, providing professional engineering consultation and advice and furnishing customary services incidental thereto. B. Standard of Care The standard of care applicable to the ENGINEER's services will be the degree of skill and diligence normally employed in the State of Texas by professional engineers or consultants performing the same or similar services at the time such services are performed. C. Subsurface Investigations (1) The ENGINEER shall advise the CITY with regard to the necessity for subcontract work such as special surveys, tests, test borings, or other subsurface investigations in connection with design and engineering work to be performed hereunder. The ENGINEER shall also advise the CITY concerning the results of same. Such surveys, tests, and investigations shall be furnished by the CITY, unless otherwise specified in Attachment A. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 2 of 16 (2) In soils, foundation, groundwater, and other subsurface investigations, the actual characteristics may vary significantly between successive test points and sample intervals and at locations other than where observations, exploration, and investigations have been made. Because of the inherent uncertainties in subsurface evaluations, changed or unanticipated underground conditions may occur that could affect the total PROJECT cost and/or execution. These conditions and cost/execution effects are not the responsibility of the ENGINEER. D. Preparation of Engineering Drawings The ENGINEER will provide to the CITY the original drawings of all plans in ink on reproducible mylar sheets and electronic files in .pdf format, or as otherwise approved by CITY, which shall become the property of the CITY. CITY may use such drawings in any manner it desires; provided, however, that the ENGINEER shall not be liable for the use of such drawings for any project other than the PROJECT described herein. E. Engineer's Personnel at Construction Site (1) The presence or duties of the ENGINEER's personnel at a construction site, whether as on-site representatives or otherwise, do not make the ENGINEER or its personnel in any way responsible for those duties that belong to the CITY and/or the CITY's construction contractors or other entities, and do not relieve the construction contractors or any other entity of their obligations, duties, and responsibilities, including, but not limited to, all construction methods, means, techniques, sequences, and procedures necessary for coordinating and completing all portions of the construction work in accordance with the Contract Documents and any health or safety precautions required by such construction work. The ENGINEER and its personnel have no authority to exercise any control over any construction contractor or other entity or their employees in connection with their work or any health or safety precautions. (2) Except to the extent of specific site visits expressly detailed and set forth in Attachment A, the ENGINEER or its personnel shall have no obligation or responsibility to visit the construction site to become familiar with the progress or quality of the completed work on the PROJECT or to determine, in general, if the work on the PROJECT is being performed in a manner indicating that the PROJECT, when completed, will be in accordance with the Contract Documents, nor shall anything in the Contract Documents or the agreement between CITY and ENGINEER be construed as requiring City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 3 of 16 ENGINEER to make exhaustive or continuous on-site inspections to discover latent defects in the work or otherwise check the quality or quantity of the work on the PROJECT. If the ENGINEER makes on-site observation(s) of a deviation from the Contract Documents, the ENGINEER shall inform the CITY. (3) When professional certification of performance or characteristics of materials, systems or equipment is reasonably required to perform the services set forth in the Scope of Services, the ENGINEER shall be entitled to rely upon such certification to establish materials, systems or equipment and performance criteria to be required in the Contract Documents. F. Opinions of Probable Cost, Financial Considerations, and Schedules (1) The ENGINEER shall provide opinions of probable costs based on the current available information at the time of preparation, in accordance with Attachment A. (2) In providing opinions of cost, financial analyses, economic feasibility projections, and schedules for the PROJECT, the ENGINEER has no control over cost or price of labor and materials; unknown or latent conditions of existing equipment or structures that may affect operation or maintenance costs; competitive bidding procedures and market conditions; time or quality of performance by third parties; quality, type, management, or direction of operating personnel; and other economic and operational factors that may materially affect the ultimate PROJECT cost or schedule. Therefore, the ENGINEER makes no warranty that the CITY's actual PROJECT costs, financial aspects, economic feasibility, or schedules will not vary from the ENGINEER's opinions, analyses, projections, or estimates. G. Construction Progress Payments Recommendations by the ENGINEER to the CITY for periodic construction progress payments to the construction contractor will be based on the ENGINEER's knowledge, information, and belief from selective sampling and observation that the work has progressed to the point indicated. Such recommendations do not represent that continuous or detailed examinations have been made by the ENGINEER to ascertain that the construction contractor has completed the work in exact accordance with the Contract Documents; that the final work will be acceptable in all respects, that the ENGINEER has made an examination to ascertain how or for what purpose the construction contractor has used the moneys paid; that title to any of the work, materials, or equipment has passed to the CITY free and clear of liens, claims, security interests, or encumbrances; or that there are not other City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 4 of 16 matters at issue between the CITY and the construction contractor that affect the amount that should be paid. H. Record Drawings Record drawings, if required, will be prepared, in part, on the basis of information compiled and furnished by others, and may not always represent the exact location, type of various components, or exact manner in which the PROJECT was finally constructed. The ENGINEER is not responsible for any errors or omissions in the information from others that is incorporated into the record drawings. I. Minority Business and Small Business Enterprise (MBE)(SBE) Participation In accord with the City of Fort Worth Business Diversity Ordinance No. 20020-12-2011, as amended, the City has goals for the participation of minority business enterprises and/or small business enterprises in City contracts. Engineer acknowledges the MBE and SBE goals established for this contract and its accepted written commitment to MBE and SBE participation. Any misrepresentation of facts (other than a negligent misrepresentation) and/or the commission of fraud by the Engineer may result in the termination of this Agreement and debarment from participating in City contracts for a period of time of not less than three (3) years. J. Right to Audit (1) ENGINEER agrees that the CITY shall, until the expiration of five (5) years after final payment under this contract, have access to and the right to examine and photocopy any directly pertinent books, documents, papers and records of the ENGINEER involving transactions relating to this contract. ENGINEER agrees that the CITY shall have access during normal working hours to all necessary ENGINEER facilities and shall be provided adequate and appropriate work space in order to conduct audits in compliance with the provisions of this section. The CITY shall give ENGINEER reasonable advance notice of intended audits. (2) ENGINEER further agrees to include in all its subconsultant agreements hereunder a provision to the effect that the subconsultant agrees that the CITY shall, until the expiration of five (5) years after final payment under the subcontract, have access to and the right to examine and photocopy any directly pertinent books, documents, papers and records of such subconsultant, involving transactions to the subcontract, and further, that the CITY shall have access during normal working hours to all subconsultant City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 5 of 16 facilities, and shall be provided adequate and appropriate work space, in order to conduct audits in compliance with the provisions of this article together with subsection (3) hereof. CITY shall give subconsultant reasonable advance notice of intended audits. (3) ENGINEER and subconsultant agree to photocopy such documents as may be requested by the CITY. The CITY agrees to reimburse ENGINEER for the cost of copies at the rate published in the Texas Administrative Code in effect as of the time copying is performed. K. INSURANCE (1) ENGINEER'S INSURANCE a. Commercial General Liability — the ENGINEER shall maintain commercial general liability (CGL) and, if necessary, commercial umbrella insurance with a limit of not less than $1,000,000.00 per each occurrence with a $2,000,000.00 aggregate. If such Commercial General Liability insurance contains a general aggregate limit, it shall apply separately to this PROJECT or location. i. The CITY shall be included as an insured under the CGL, using ISO additional insured endorsement or a substitute providing equivalent coverage, and under the commercial umbrella, if any. This insurance shall apply as primary insurance with respect to any other insurance or self-insurance programs afforded to the CITY. The Commercial General Liability insurance policy shall have no exclusions by endorsements that would alter or nullify: premises/operations, products/completed operations, contractual, personal injury, or advertizing injury, which are normally contained within the policy, unless the CITY approves such exclusions in writing. ii. ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by the commercial general liability or commercial umbrella liability insurance maintained in accordance with this agreement. b. Business Auto — the ENGINEER shall maintain business auto liability and, if necessary, commercial umbrella liability insurance with a limit of not less than $1,000,000 each accident. Such insurance shall cover liability arising out of "any auto", including owned, hired, and non-owned autos, when said vehicle is used in the course of the PROJECT. If the engineer owns no vehicles, coverage for hired or non-owned is City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 6 of 16 acceptable. i. ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by the business auto liability or commercial umbrella liability insurance obtained by ENGINEER pursuant to this agreement or under any applicable auto physical damage coverage. c. Workers' Compensation —ENGINEER shall maintain workers compensation and employers liability insurance and, if necessary, commercial umbrella liability insurance with a limit of not less than $100,000.00 each accident for bodily injury by accident or $100,000.00 each employee for bodily injury by disease, with $500,000.00 policy limit. i. ENGINEER waives all rights against the CITY and its agents, officers, directors and employees for recovery of damages to the extent these damages are covered by workers compensation and employer's liability or commercial umbrella insurance obtained by ENGINEER pursuant to this agreement. d. Professional Liability — the ENGINEER shall maintain professional liability, a claims-made policy, with a minimum of $1,000,000.00 per claim and aggregate. The policy shall contain a retroactive date prior to the date of the contract or the first date of services to be performed, whichever is earlier. Coverage shall be maintained for a period of 5 years following the completion of the contract. An annual certificate of insurance specifically referencing this project shall be submitted to the CITY for each year following completion of the contract. (2) GENERAL INSURANCE REQUIREMENTS a. Certificates of insurance evidencing that the ENGINEER has obtained all required insurance shall be delivered to the CITY prior to ENGINEER proceeding with the PROJECT. b. Applicable policies shall be endorsed to name the CITY an Additional Insured thereon, as its interests may appear. The term CITY shall include its employees, officers, officials, agents, and volunteers as respects the contracted services. c. Certificate(s) of insurance shall document that insurance coverage specified in this agreement are provided under applicable policies documented thereon. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 7 of 16 d. Any failure on part of the CITY to request required insurance documentation shall not constitute a waiver of the insurance requirements. e. A minimum of thirty (30) days notice of cancellation or material change in coverage shall be provided to the CITY. A ten (10) days notice shall be acceptable in the event of non-payment of premium. Notice shall be sent to the respective Department Director (by name), City of Fort Worth, 1000 Throckmorton, Fort Worth, Texas 76102. f. Insurers for all policies must be authorized to do business in the State of Texas and have a minimum rating of AV or greater, in the current A.M. Best Key Rating Guide or have reasonably equivalent financial strength and solvency to the satisfaction of Risk Management. g. Any deductible or self insured retention in excess of $25,000.00 that would change or alter the requirements herein is subject to approval by the CITY in writing, if coverage is not provided on a first-dollar basis. The CITY, at it sole discretion, may consent to alternative coverage maintained through insurance pools or risk retention groups. Dedicated financial resources or letters of credit may also be acceptable to the CITY. h. Applicable policies shall each be endorsed with a waiver of subrogation in favor of the CITY as respects the PROJECT. i. The CITY shall be entitled, upon its request and without incurring expense, to review the ENGINEER's insurance policies including endorsements thereto and, at the CITY's discretion; the ENGINEER may be required to provide proof of insurance premium payments. j. Lines of coverage, other than Professional Liability, underwritten on a claims-made basis, shall contain a retroactive date coincident with or prior to the date of the contractual agreement. The certificate of insurance shall state both the retroactive date and that the coverage is claims-made. k. Coverages, whether written on an occurrence or claims-made basis, shall be maintained without interruption nor restrictive modification or changes from date of commencement of the PROJECT until final payment and termination of any coverage required to be maintained after final payments. I. The CITY shall not be responsible for the direct payment of any insurance premiums required by this agreement. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 8 of 16 m. Sub consultants and subcontractors to/of the ENGINEER shall be required by the ENGINEER to maintain the same or reasonably equivalent insurance coverage as required for the ENGINEER. When sub consultants/subcontractors maintain insurance coverage, ENGINEER shall provide CITY with documentation thereof on a certificate of insurance. L. Independent Consultant The ENGINEER agrees to perform all services as an independent consultant and not as a subcontractor, agent, or employee of the CITY. M. Disclosure The ENGINEER acknowledges to the CITY that it has made full disclosure in writing of any existing conflicts of interest or potential conflicts of interest, including personal financial interest, direct or indirect, in property abutting the proposed PROJECT and business relationships with abutting property cities. The ENGINEER further acknowledges that it will make disclosure in writing of any conflicts of interest that develop subsequent to the signing of this contract and prior to final payment under the contract. N. Asbestos or Hazardous Substances (1) If asbestos or hazardous substances in any form are encountered or suspected, the ENGINEER will stop its own work in the affected portions of the PROJECT to permit testing and evaluation. (2) If asbestos or other hazardous substances are suspected, the CITY may request the ENGINEER to assist in obtaining the services of a qualified subcontractor to manage the remediation activities of the PROJECT. O. Permitting Authorities - Design Changes If permitting authorities require design changes so as to comply with published design criteria and/or current engineering practice standards which the ENGINEER should have been aware of at the time this Agreement was executed, the ENGINEER shall revise plans and specifications, as required, at its own cost and expense. However, if design changes are required due to the changes in the permitting authorities' published design criteria and/or practice standards criteria which are published after the date of this Agreement which the ENGINEER could not have been reasonably aware of, the ENGINEER shall notify the CITY of such changes and an adjustment in compensation will be made through an City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 9 of 16 amendment to this AGREEMENT. P. Schedule ENGINEER shall manage the PROJECT in accordance with the schedule developed per Attachment D to this AGREEMENT. Article V Obligations of the City Amendments to Article V, if any, are included in Attachment C. A. City-Furnished Data ENGINEER may rely upon the accuracy, timeliness, and completeness of the information provided by the CITY. B. Access to Facilities and Property The CITY will make its facilities accessible to the ENGINEER as required for the ENGINEER's performance of its services. The CITY will perform, at no cost to the ENGINEER, such tests of equipment, machinery, pipelines, and other components of the CITY's facilities as may be required in connection with the ENGINEER's services. The CITY will be responsible for all acts of the CITY's personnel. C. Advertisements, Permits, and Access Unless otherwise agreed to in the Scope of Services, the CITY will obtain, arrange, and pay for all advertisements for bids; permits and licenses required by local, state, or federal authorities; and land, easements, rights- of-way, and access necessary for the ENGINEER's services or PROJECT construction. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 10 of 16 D. Timely Review The CITY will examine the ENGINEER's studies, reports, sketches, drawings, specifications, proposals, and other documents; obtain advice of an attorney, insurance counselor, accountant, auditor, bond and financial advisors, and other consultants as the CITY deems appropriate; and render in writing decisions required by the CITY in a timely manner in accordance with the project schedule prepared in accordance with Attachment D. E. Prompt Notice The CITY will give prompt written notice to the ENGINEER whenever CITY observes or becomes aware of any development that affects the scope or timing of the ENGINEER's services or of any defect in the work of the ENGINEER or construction contractors. F. Asbestos or Hazardous Substances RGf (1) CITY acknowledges ENGINEER will perform part of the work at CITY's facilities that may contain hazardous materials, including asbestos containing materials, or conditions, and that ENGINEER had no prior role in the generation, treatment, storage, or disposition of such materials. In consideration of the associated risks that may give rise to claims by third parties or employees of City, City hereby releases ENGINEER from any damage or liability related to the presence of such materials. (2) The release required above shall not apply in the event the discharge, release or escape of hazardous substances, contaminants, or asbestos is a result of ENGINEER's negligence or if ENGINEER brings such hazardous substance, contaminant or asbestos onto the project. G. Contractor Indemnification and Claims The CITY agrees to include in all construction contracts the provisions of Article IV.E. regarding the ENGINEER's Personnel at Construction Site, and provisions providing contractor indemnification of the CITY and the ENGINEER for contractor's negligence. H. Contractor Claims and Third-Party Beneficiaries (1) The CITY agrees to include the following clause in all contracts with construction contractors and equipment or materials suppliers: "Contractors, subcontractors and equipment and materials suppliers on the PROJECT, or their sureties, shall maintain City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 11 of 16 no direct action against the ENGINEER, its officers, employees, and subcontractors, for any claim arising out of, in connection with, or resulting from the engineering services performed. Only the CITY will be the beneficiary of any undertaking by the ENGINEER." (2) This AGREEMENT gives no rights or benefits to anyone other than the CITY and the ENGINEER and there are no third-party beneficiaries. (3) The CITY will include in each agreement it enters into with any other entity or person regarding the PROJECT a provision that such entity or person shall have no third-party beneficiary rights under this Agreement. (4) Nothing contained in this section V.H. shall be construed as a waiver of any right the CITY has to bring a claim against ENGINEER. I, CITY'v Insurance (1) The CITY may maintain property insurance on certain pre-existing structures associated with the PROJECT. (2) The CITY will ensure that Builders Risk/installation insurance is maintained at the replacement cost value of the PROJECT. The CITY may provide ENGINEER a copy of the policy or documentation of such on a certificate of insurance. (3) The CITY will specify that the Builders Risk/Installation insurance shall be comprehensive in coverage appropriate to the PROJECT risks. J. Litigation Assistance The Scope of Services does not include costs of the ENGINEER for required or requested assistance to support, prepare, document, bring, defend, or assist in litigation undertaken or defended by the CITY. In the event CITY requests such services of the ENGINEER, this AGREEMENT shall be amended or a separate agreement will be negotiated between the parties. K. Changes The CITY may make or approve changes within the general Scope of Services in this AGREEMENT. If such changes affect the ENGINEER's cost of or time required for performance of the services, an equitable adjustment will be made through an amendment to this AGREEMENT with appropriate CITY approval. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 12 of 16 Article VI General Legal Provisions Amendments to Article VI, if any, are included in Attachment C. A. Authorization to Proceed ENGINEER shall be authorized to proceed with this AGREEMENT upon receipt of a written Notice to Proceed from the CITY. B. Reuse of Project Documents All designs, drawings, specifications, documents, and other work products of the ENGINEER, whether in hard copy or in electronic form, are instruments of service for this PROJECT, whether the PROJECT is completed or not. Reuse, change, or alteration by the CITY or by others acting through or on behalf of the CITY of any such instruments of service without the written permission of the ENGINEER will be at the CITY's sole risk. The CITY shall own the final designs, drawings, specifications and documents. C. Force Majeure The ENGINEER is not responsible for damages or delay in performance caused by acts of God, strikes, lockouts, accidents, or other events beyond the control of the ENGINEER that prevent ENGINEER's performance of its obligations hereunder. D. Termination (1) This AGREEMENT may be terminated only by the City for convenience on 30 days' written notice. This AGREEMENT may be terminated by either the CITY or the ENGINEER for cause if either party fails substantially to perform through no fault of the other and does not commence correction of such nonperformance with in 5 days of written notice and diligently complete the correction thereafter. (2) If this AGREEMENT is terminated for the convenience of the City, the ENGINEER will be paid for termination expenses as follows: a.) Cost of reproduction of partial or complete studies, plans, specifications or other forms of ENGINEER'S work product; City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 13 of 16 b.) Out-of-pocket expenses for purchasing electronic data files and other data storage supplies or services; C.) The time requirements for the ENGINEER'S personnel to document the work underway at the time of the CITY'S termination for convenience so that the work effort is suitable for long time storage. (3) Prior to proceeding with termination services, the ENGINEER will submit to the CITY an itemized statement of all termination expenses. The CITY'S approval will be obtained in writing prior to proceeding with termination services. E. Suspension, Delay, or Interruption to Work The CITY may suspend, delay, or interrupt the services of the ENGINEER for the convenience of the CITY. In the event of such suspension, delay, or interruption, an equitable adjustment in the PROJECT's schedule, commitment and cost of the ENGINEER's personnel and subcontractors, and ENGINEER's compensation will be made. F. Indemnification In accordance with Texas Local Government Code Section 271.904, the ENGINEER shall indemnify, hold harmless, and defend the CITY against liability for any damage caused by or resulting from an act of negligence, intentional tort, intellectual property infringement, or failure to pay a subcontractor or supplier committed by the ENGINEER or ENGINEER's agent, consultant under contract, or another entity over which the ENGINEER exercises control. G. Assignment Neither party shall assign all or any part of this AGREEMENT without the prior written consent of the other parry. H. Interpretation Limitations on liability and indemnities in this AGREEMENT are business understandings between the parties and shall apply to all the different theories of recovery, including breach of contract or warranty, tort including negligence, strict or statutory liability, or any other cause of action, except for willful misconduct or gross negligence for limitations of liability and sole negligence for indemnification. Parties mean the CITY and the ENGINEER, and their officers, employees, agents, and subcontractors. City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 14 of 16 I. Jurisdiction The law of the State of Texas shall govern the validity of this AGREEMENT, its interpretation and performance, and any other claims related to it. The venue for any litigation related to this AGREEMENT shall be Tarrant County, Texas. J. Severability and Survival If any of the provisions contained in this AGREEMENT are held for any reason to be invalid, illegal, or unenforceable in any respect, such invalidity, illegality, or unenforceability will not affect any other provision, and this AGREEMENT shall be construed as if such invalid, illegal, or unenforceable provision had never been contained herein. Articles V.F., VI.B., VI.D., VI.F., VI.H., and VI.I. shall survive termination of this AGREEMENT for any cause. K. Observe and Comply ENGINEER shall at all times observe and comply with all federal and State laws and regulations and with all City ordinances and regulations which in any way affect this AGREEMENT and the work hereunder, and shall observe and comply with all orders, laws ordinances and regulations which may exist or may be enacted later by governing bodies having jurisdiction or authority for such enactment. No plea of misunderstanding or ignorance thereof shall be considered. ENGINEER agrees to defend, indemnify and hold harmless CITY and all of its officers, agents and employees from and against all claims or liability arising out of the violation of any such order, law, ordinance, or regulation, whether it be by itself or its employees. Article VII Attachments, Schedules, and Signatures This AGREEMENT, including its attachments and schedules, constitutes the entire AGREEMENT, supersedes all prior written or oral understandings, and may only be changed by a written amendment executed by both parties. The following attachments and schedules are hereby made a part of this AGREEMENT: Attachment A— Scope of Services Attachment B — Compensation Attachment C —Amendments to Standard Agreement for Engineering Services Attachment D — Project Schedule City of Fort Worth,Texas Standard Agreement for Engineering Related Design Services Revised Date:9/24/2014 Page 15 of 16 Executed and effective this the `+"lam day ofcZ , 2015-- BY: BY: CITY OF FORT WORTH ENGINEER Kimley-Horn and Associates, Inc. r T-C"r� Glenn Gary, P.E. Assistant City Manager Senior Vice President Date: Date: 0? 7- ROL S APPROVAL RECOMMENDED: By: (-. L. DougW. Wiersig, P.E. Direct, Department of Transportation/Public Works APPROVED AS TO FORM AND M&C No.: LEGALITY sr�'564t'— M&C Date: By: Douglas W. Black Assistant City Attorney ATTEST: ®' � o o� �O 0 Mary $% o� City Secr ary ®ocoaoe�- OFFICIAL RECORD CITY SECRETARY FT. WORTH, TX City of Fort Worth,Texas _ Standard Agreement for Engineering Related Design Services = Revised Date:9/24/2014 Page 16 of 16 ATTACHMENT "A" Scope for Engineering Design Related Services for Traffic Signal Bid Package 2015-3 The scope set forth herein defines the work to be performed by the ENGINEER in completing the project. Both the CITY and ENGINEER have attempted to clearly define the work to be performed and address the needs of the Project. OBJECTIVE The objective of this project is to prepare the Traffic Signal Bid Package 2015-3, which will include the following improvements: - Traffic Signal Re-build at Clover Lane and W. Vickery Boulevard - Traffic signal reconstruction at Montgomery Street and Lovell Avenue (designed under previous contract) - Traffic signal modification at University Drive and Rosedale Street (designed under previous contract) - Traffic signal modification at Montgomery Street and W. Vickery Street (designed under previous contract) WORK TO BE PERFORMED TASK 1. TOPOGRAPHIC SURVEY 1.1. Topographic Survey • The limits of survey will be: — The intersection of Clover Lane at W. Vickery Boulevard. — 200 feet in each direction along the three (3) legs of the intersection. • Horizontal and vertical control will be established. • Provide a topographic survey for the limits listed above. The topographic survey will locate all existing features within the right-of-way including, but not limited to, power poles, trees, bushes, buildings, sanitary sewer manholes and clean-outs, fences and walls, water valves and meters, signs, utility markers, curb lines, paving, and bridge columns. ASSUMPTIONS • None. DELIVERABLES A. Digital file in AutoCAD format showing all features located (e.g. utilities, existing signal equipment, etc.), property and right-of-way lines, one foot contours, TIN and all point data. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 1 of 8 B. LandXML file. C. ASCII point file. D. Hard copy of the field notes and field drawings. TASK 2. PLANS, SPECIFICATIONS, AND ESTIMATE (PS&E) 2.1. Short Report (Clover Lane at W. Vickery only) • Data Collection - The ENGINEER may obtain hard copies of record drawings from the CITY. The record drawings should include, but not be limited to, the proposed roadway plans, right-of-way information, and utility plans. If available, the CITY will furnish the ENGINEER electronic copies of the MicroStation CAD files of the existing record drawings or proposed construction plans. For current signalized intersections, the CITY will furnish existing timing data. - The ENGINEER will meet with the CITY in the field to discuss the electric service, communications, proposed traffic signal equipment locations, vehicle detection, and Opticom requirements. All existing and proposed utilities, pavement widths, lane configurations, and traffic control devices will be determined based on field observations, the record drawings provided by the CITY, and the topographic survey collected in Task 1. - The ENGINEER will collect peak hour turning movement counts for the project intersection. The peak periods will include: AM (6:30 am -9:00 am) and PM (4:00 pm -6:00 pm). • Capacity Analysis - The ENGINEER will perform a capacity analysis indicating level of service for each movement at the intersection. A capacity analysis report using the SynchroTM 8 analysis software will be performed. - The ENGINEER will recommend the appropriate traffic signal phasing for the intersection with consideration to the capabilities of the current CITY controller hardware and software operational functionality. • Development of the Short Report shall include the following: - Existing traffic volumes; - Discussion of existing and proposed conditions; - Capacity analysis results; - Photo-log of intersection approaches and corners; City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 2 of 8 — Recommendations for signal design, phasing, operations, illumination, and pedestrian accommodations, including a preliminary layout with cabinet, pole, and service placements; and — Address any unusual conditions and provide recommendations to resolve these conditions. ASSUMPTIONS • The ENGINEER will determine the pedestrian and ADA requirements for the project intersection. • Prior to preparing base plan sheets or conducting field site visits, the ENGINEER will schedule franchise utility locates (Texas 811). • The ENGINEER will create base plan sheets for signal plans from the record drawings, topographic survey, and aerial photography provided by the CITY, if available. • The ENGINEER will submit 1-PDF copy of the draft short report through Buzzsaw and up to 2 —8.5" x 11" paper copies to the CITY. • The ENGINEER will incorporate review comments and submit a final "short report" to the CITY (1 — PDF electronic copy; 2—8.5 x 11" paper copies). DELIVERABLES A. Draft Short Report B. Final Short Report 2.2. Traffic Signal Design ENGINEER will prepare and submit a 90%, 99% and 100% plans, specifications, and estimates (PS&E) as follows: • Title Sheet • Estimate Summary Sheet • Existing Conditions and Removal Layout showing utility lines, illumination, traffic signal equipment, signs, markings, and any removals (if necessary). • Traffic Signal Design Layout showing existing utilities (utility poles, street lights, storm drains, fire hydrants, etc.), permanent traffic signal poles and mast arms, pedestrian signal poles, pedestrian signals, push buttons, controller cabinet assemblies, signal heads, street lights, detection zones, conduit, ground boxes, power sources with distribution to signal service, communication connections, wiring diagrams, pavement markings, signal phasing plan, Opticom equipment, conduit and cable chart, pole summary chart, phasing sequence, pole details, pole locations diagram, and all other items required for the complete construction of the traffic signal. • Intersection Corner Detail Layouts showing a smaller scale view of each intersection. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 3 of 8 • Signs and Markings Layout showing existing signs, proposed signs, Metro signs, existing striping, proposed striping, pavement markings summary chart, and sign summary chart. • Sidewalk Ramp Layout showing proposed sidewalk ramp layouts with dimensions, spot elevations and slopes, CITY standard and special sidewalk ramp details, and sidewalk ramp quantities. • Traffic Signal Standard Detail Sheets • Preliminary Opinion of Probable Construction Cost ASSUMPTIONS • Curb ramp elevation details will be added to the previously completed Montgomery at Lovell plans. • The PS&E shall be prepared in accordance with the applicable requirements for CITY plans, details, specifications, standards, and manuals. • The ENGINEER will review the general notes, traffic signal specifications, and standard general provisions supplied by the CITY for applicability and modify (if necessary) for the respective locations. The ENGINEER will identify any design exceptions to CITY Standards in the 90% design phase. • Existing traffic signal specifications and standards furnished by the CITY will be used for design plans, unless otherwise requested by the CITY in writing. These include: - City of Fort Worth Transportation and Public Works "Traffic Signal Design Guidelines, November 2008". - Example plan set illustrating desired format for each type of plan sheet to be developed by the Engineer. - Example City standard traffic signal construction details, specifications, and Contract Documents. • Record Drawings prepared by others (CITY or representative), topographic survey, and aerial photography will be used as the basis for any designs associated with the PROJECT. • The plans, standards and any special specifications will be prepared using English units. • All CAD standards and level symbology will follow CITY requirements. • The CITY will provide determination for provision of communication, vehicle detection, and Opticom equipment. • The intersection will be designed to accommodate existing or future pedestrian activities, including sidewalk ramps, crosswalks, push buttons, and pedestrian heads to meet ADA requirements as requested by the CITY. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 4 of 8 • The ENGINEER will incorporate review comments and submit 90% PS&E traffic signal designs to the CITY (1 — PDF electronic copy submitted through Buzzsaw; up to 2 — 22" x 34" paper copies). • The ENGINEER will incorporate review comments and submit 99% PS&E traffic signal designs to the CITY (1 — PDF electronic copy submitted through Buzzsaw; up to 2 — 22" x 34" paper copies). • The ENGINEER will incorporate review comments and submit FINAL (100%) PS&E traffic signal designs (1 — PDF electronic copy; 3— 22" x 34" paper copies). • The ENGINEER will prepare and submit the quantity estimates and engineer's opinion of probable construction cost spreadsheet prepared in Microsoft Excel. • The ENGINEER will provide the CITY a CD of the electronic AutoCAD traffic signal design files, quantity estimates, and engineer's opinion of probable construction cost. • The ENGINEER will submit final plans to a Registered Accessibility Specialist (RAS) for TDLR review. The ENGINEER will submit the project filing, review, and inspection fees. DELIVERABLES A. 90% PS&E. B. 99% PS&E C. 100% PS&E D. CD of the electronic AutoCAD traffic signal design plans, quantity estimates, and engineer's opinion of probable construction cost. TASK 3. MEETINGS. 3.1. Plan Review Meetings • ENGINEER will attend one (1) plan review meeting with the City. • Utility Coordination Meetings: — Water Department 0 The ENGINEER will prepare for and attend one (1) in-field meeting with representatives from the Water Department to walk the project to identify potential constructability issues of the proposed traffic signal pole placements as shown in the Conceptual Plans. — Stormwater Department 0 The ENGINEER will prepare for and attend one (1) in-field meeting with representatives from the Stormwater Department to walk the City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 5 of 8 project to identify potential constructability issues of the proposed traffic signal pole placements as shown in the Conceptual plans. Franchise Utilities 0 The ENGINEER will prepare for and attend up to two (2) separate meetings with franchise utilities (electric, gas, etc.). ASSUMPTIONS • A neighborhood meeting will not be held for this project. DELIVERABLES A. Meeting notes TASK 4. CONSTRUCTION PHASE SERVICES. ENGINEER will support the construction phase of the project as follows. 4.1. Construction Support • The ENGINEER shall attend the preconstruction conference. • The ENGINEER will provide up to twenty-five (25) full-size plan sets for the Contractor and CITY inspector. • The ENGINEER shall visit the project site up to six (6) times as construction proceeds to observe and report on progress. • The ENGINEER will attend up to twelve (12) weekly construction progress meetings during the duration of construction. The ENGINEER will prepare meeting notes with action items and distribute these to the project team. • The ENGINEER shall review up to two (2) shop drawings submittals, samples and other submittals submitted by the contractor for general conformance with the design concepts and general compliance with the requirements of the contract for construction. Such review shall not relieve the Contractor from its responsibility for performance in accordance with the contract for construction, nor is such review a guarantee that the work covered by the shop drawings, samples and submittals is free of errors, inconsistencies or omissions. The ENGINEER shall log and track all shop drawings, samples and other submittals in Buzzsaw. • As requested by the CITY, the ENGINEER shall respond to contractor RFI's, review change orders, and make recommendations as to the acceptability of the work. • The ENGINEER shall attend the "Final" project walk through, and assist with preparation of final punch list. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 6 of 8 • The ENGINEER will document post-construction conditions with video or still pictures. 4.2. As-Built Drawings • The ENGINEER shall prepare as-built drawings from information provided by the CITY depicting any changes made to the Final Drawings during construction. The following information shall be provided by the CITY: - As-Built Survey - Red-Line Markups from the Contractor - Red-Line Markups from City Inspector - Copies of Approved Change Orders - Approved Substitutions • The ENGINEER shall modify the Final Drawings electronically, and shall place a stamp on the plans indicating that they represent As-Built Drawings of the project as constructed. The stamp shall be signed and dated by the ENGINEER and shall be placed on each plan sheet, whether there are any revisions on the sheet or not. Each sheet shall clearly indicate all changes which apply to that sheet by clouding and numbering, or other suitable means. • The following disclaimer shall be included with the As-Built stamp: - These As-Built Drawings were prepared using information provided by others, and represent the as constructed conditions to the extent that documented changes were provided for recording. The ENGINEER assumes no liability for undocumented changes and certifies only that the documented changes are accurately depicted on these drawings. • The ENGINEER shall submit a set of sealed Final Drawings, modified and stamped as As-Built Drawings, on Mylar for record storage. The ENGINEER may keep copies of the information provided by the CITY for their files, but all original red-lined drawings shall be returned to the CITY with the Mylars. • As-Built Drawings shall also be submitted as an Adobe Acrobat PDF format (version 6.0 or higher) file and DWF format. There shall be one (1) PDF file and one (1) DWF file for the TPW plan set. Each PDF and DWF file shall contain all associated sheets of the particular plan set. Singular PDF and DWF files for each sheet of a plan set will not be accepted. PDF and DWF files shall conform to naming conventions as follows: - TPW file name example-"W-1956_org47.pdf' where "W-1956" is the assigned file number obtained from the CITY, "_org" designating the file is of an original plan set, "47" shall be the total number of sheets in this file. Example: W-0053_org3.pdf and K-0320_org5.pdf. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 7 of 8 • Both PDF and DWF files shall be uploaded to the project's As-Built Drawing folder in Buzzsaw. ASSUMPTIONS • Six (6) site visits are assumed. • Twelve (12) weekly construction meetings are assumed. • Two (2) submittal reviews are assumed. • Three (3) RFI's are assumed. • Two (2) Change Orders are assumed. • One copy of full size (22"04") Mylars will be delivered to the CITY. DELIVERABLES A. Up to 25 full-size plan (paper) sets B. Response to Contractor's Request for Information C. Review of change orders D. Review of shop drawings and shop drawing review comments E. Final Punch List items F. As-Built Drawings ADDITIONAL SERVICES NOT INCLUDED IN THE EXISTING SCOPE OF SERVICES Additional Services not included in the existing Scope of Services — CITY and ENGINEER agree that the following services are beyond the Scope of Services described in the tasks above. However, ENGINEER can provide these services, if needed, upon the CITY's written request. Any additional amounts paid to the ENGINEER as a result of any material change to the Scope of the Project shall be agreed upon in writing by both parties before the services are performed. These additional services include the following: • Easement or right-of-way take documents. • Negotiation of easements or property acquisition. • Construction management and inspection services. • Performance of materials testing or specialty testing services. • Services to support, prepare, document, bring, defend, or assist in litigation undertaken or defended by the CITY. • Items not explicitly stated in the Scope for Engineering Design related services. • Additional meetings in addition to the aforementioned scoped meetings. • Performance of miscellaneous and supplemental services related to the project as requested by the CITY. City of Fort Worth,Texas Attachment A PMO Release Date:07.23.2012 Page 8 of 8 ATTACHMENT B COMPENSATION Design Services for Clover Lane at W. Vickery Boulevard Traffic Signal Design City Project No. 00005 Time and Materials with Rate Schedule Project I. Compensation A. The ENGINEER shall be compensated in an hourly amount not to exceed $43.734.00 as summarized in Exhibit B-1 — Engineer Invoice and Section IV — Summary of Total Project Fees in performing services enumerated in Attachment A as follows: i. Personnel Time. Personnel time shall be compensated based upon hours worked directly in performing the PROJECT multiplied by the appropriate Labor Category Rate for the ENGINEER's team member performing the work and includes all direct salaries, overhead, and profit. Labor Category Rate as presented in the rate schedule table below is the rate for each labor category performing the work and includes all direct salaries, overhead, and profit. Labor Category Rate ($/hour) Project Director $225 Project Manager $175 Registered Professional Land Surveyor $150 (RPLS) Project Engineer $120 EIT $105 CADD $90 Administrative $75 ii. Non-Labor Expenses. Non-labor expenses shall be reimbursed as Direct Expenses at invoice or internal office cost. Direct Expenses (non-labor) include, but are not limited to, mileage, travel expenses, mail, supplies, printing and reproduction services, other direct expenses associated with delivery of the work; plus applicable sales, use, value added, business transfer, gross receipts, or other similar taxes. iii. Subcontract Expenses. Subcontract expenses and outside services shall be reimbursed at cost to ENGINEER plus a markup of ten percent (10%). City of Fort Worth,Texas Attachment B PMO Official Release Date:8.09.2012 Page 1 of 4 B-1 ATTACHMENT B COMPENSATION iv. Budgets. ENGINEER will make reasonable efforts to complete the work within the budget and will keep the City informed of progress toward that end so that the budget or work effort can be adjusted if found necessary. ENGINEER is not obligated to incur costs beyond the indicated budgets, as may be adjusted, nor is the City obligated to pay ENGINEER beyond these limits. ENGINEER may exceed individual task budgets provided the total contract amount is not exceeded. If ENGINEER projects, in the course of providing the necessary services that the PROJECT cost presented in Article 2 of this Agreement will be exceeded, whether by change in scope of the project, increased costs or other conditions, the ENGINEER shall immediately report such fact to the City and, if so instructed by the City, shall suspend all work hereunder. When any budget has been increased, ENGINEER's excess costs expended prior to such increase will be allowable to the same extent as if such costs had been incurred after the approved increase. B. The ENGINEER shall be paid monthly payments as described in Section II - Method of Payment. II. Method of Payment A. The ENGINEER shall be paid by the City based upon an invoice created on the basis of statements prepared from the books and records of account of the ENGINEER, based on the actual hours and costs expended by the ENGINEER in performing the work. B. Each invoice shall be verified as to its accuracy and compliance with the terms of this Agreement by an officer of the ENGINEER. C. ENGINEER shall prepare and submit invoices in the format and including content as presented in Exhibit B-1. The cumulative sum of each monthly partial fee payments shall not exceed the total current project budget including all approved Amendments. D. Payment of invoices will be subject to certification by the City that such work has been performed. III. Progress Reports A. The ENGINEER shall prepare and submit to the designated representative of the Transportation and Public Works Department monthly progress reports and schedules in the format required by the City. City of Fort Worth,Texas Attachment B PMO Official Release Date:8.09.2012 Page 2 of 4 B-2 ATTACHMENT B COMPENSATION IV. Summary of Total Project Fees Firm Primary Responsibility Fee Amount Prime Consultant Kimley-Horn and Traffic signal design, $ 40,253.00 92.1% Associates, Inc. construction phase services Proposed MBE/SBE Sub-Consultants GRAM Traffic North Traffic counts $ 271.00 0.6% Texas PIC Printing LLC Reprographics $755.00 1.7% Accessology Too, LLC TDLR Review and Inspection $955.00 2.2% Non-MBE/SBE Consultants Yazel Peebles & Topographic survey field work $ 1,500.00 3.4% Associates, LLC TOTAL $ 43,734.00 100% Project Number& Name Total Fee MBE/SBE Fee MBE/SBE 00005— Clover Lane at W. Vickery Boulevard Traffic Signal $ 43,734.00 $ 1,981.00 4.5% Design City MBE/SBE Goal = n/a Consultant Committed Goal = n/a City of Fort Worth,Texas Attachment B PMO Official Release Date:8.09.2012 Page 3 of 4 B-3 EXHIBIT "B-1" ENGINEER INVOICE (Supplement to Attachment B) Insert required invoice format following this page, including negotiated total budget and allocations of budgets across desired work types and work phases. City of Fort Worth,Texas Attachment B PMO Official Release Date:8.09.2012 Page 4 of 4 B-4 R8 m § (( EZ � kk J $ ] ) 22 =2 | 1 0 } / � ■ 0 k - ! | - E i—f R \ � @ ■ ) . x § / e ! / § 9) a ! � � \ � 0 m } ,J & § ! 21 � 0 = LU § ! � \ _ \ § E cl 7 [ § 7r)/ ! 0 ! _ /§ J iD ) ( k ) ( § e k ; § ! J0 « ` ( = e - 7 % / §§�) J AL / cr C, k tm 2 co J a t E / U) K - /a co � CL % moi ) @ \ 0o LL : 2 u { } 'T, w \ /k @ � k § f co z U% § � U) 7 ; �\ u § k-$� ;k a � � 2 = & °� - a � >22_ 22 oo» E -SEE a ao / 3 )\C��/ 2 £ £ £ £ « « # a § - k 2 @ : 0 > S . ',SjiL - § §§ §888§888888 o Z , ao a; f �2 § C� a §� kz 2 U- 04 2 - L� CL 0 $ a §$ M@M7 . � mwSgG@w k IL ƒ ' § � � 2 � z % 2 0 § C14 Lu \ ui z 07§ � - 2 � = ' cc U ) k \ + | n & % 2A � 7 - � S it k k cc ft 0 = . a § o a / { § ( /k Q }\) e \\ § k ■ _ A#{ LU § / 0 / kk f } k - / .(�/ k % k k § \2® a �] 7 HA2 ! 7 ] EJ&f- 2 -E w -i E � -v k § § mCD2 t=8E �w22 �) ] k 0 § 82! u uu i _jlliZE»2 $«oE« a z e 8 ° 8R E2 J � 0 3 / / > k� a. 3 ! G / ) ( 2 ® f! « o § I a 10 CL & CL ! § & § 3 § � . . ® 2 2« _ ) k � Q � E a +/ \ ` — \ Sq� Q > kR \// K ^ 2E _ ! _ E k \ / � \ }/ C 5C? ° :01 { � , \ : SRg j § ` 3 &am \ [)i E 0 S m % E \ / 2« k E (/ ) G \\ ■} \ I - )k/) J a f/ f § ƒ LM LU } E} /) � \ 5 § - o ■ f 0 e q 7�� � C \ \ 2 # 8& ; .. «] Ef amu = ■ $ § m 22 £ >- E ( r{ k o • k\{k#\ tt { � > //mm �a Ka ,k5o�0 c / ƒ § 3 0. /z§» z /iL a ( i ( § � 7 ; 2- J k ) G = ) � i2 | o £ : \ / j ) ( - ) & ta | E 7 / ! § 2J E { / ) L a E ) ) 2 s . 22 - + § Q \/ � ) \ K * : f: / J ) o j l §o / 7 )) L2 2 ) ((! § /)§ \ f/® o } k) 'n? § n G 2 - % \ )§k) # 4/ § 2 ■ CL7 { ) § d ■ _ , 2 . E lo §fi >, C: - } ae{ _ ) § G / v u Z5 ƒ , @ § m ; L: § k ?k 2 ° & © ) t» & ■2 m �k§ # .k / # 4- ■ §#.. ; @ E - 27/oa/� § )r � E�� a aO]z§a Q 3«ƒ��/ a } \ Sp O O O O to N N N O o O N O O O O N N O O N r«O W V O N W O N.- e'!M r O O«O«O««W W O N M W O l+f O O O aD N O O of W W�WN t` CCC��� N N O«V(R N-W P11 t")M O W N N 1� M,a � M N W 411 (A (A N N N M(9 w W di Q N t919 < to N M b A F m O O f0 O O N O O N N O O N o O O O N N O a a O m C C C ~a a 0 0 10 Ol N f9 N O N N N e9 N N O Vi M N N Vi P9 E B m a m m o O N N N NN Nf9 N W f9 �N� (9W OOa E o m m««lam(p U M a N W N N N fn X C C '� Z;l O w p o m FQ f U)(A w a p a ww ma N N N M N me m lH O m _ —7 Q O m H NN M3 N V �N ppb Z O tO WNN NNN t N M i N > N m � P o C ~ p p w m $ N N N g o c m Z C pp S N 7 ra N W M w p N O O N N N o O O N N o 0 0 0 o O N O O W N N 17 W Ot n N W Oto o'Oa m m w V W as co N N r aD W.�t7 p J O N O M O V 1HN NM h e9 Mi N N N ViM m` N N N M N N W N !fl W to Nf N N m U O r O t4 N N S O O b A w � M � N ap E y Z C Q r3 ` N o 0 0 O O (A Y.UJ U d Z o 'N (oo N O O N O M 6 V t: m d v L o C pw « UJ 0 c p WO C d L p O W N W Q M M N N W N M W M N N V as L m m R 10 > U) V O C N J H � taw J 00 0 0 � to J b a D' N O W O W O N 17 M N N W M Wtx W M O N«N m m A A O C N U O b m ri N O Q N a`g m N K m O H V y o o a m E c FL r� m m u qq m an d c m N a E m E t Y w V N o O ED N N m D R L 2 c�0, o m >2 0 W ~ m ` d Q y m m m c c c c c a = 4 E D« a a w m y ? m yo a otm" 02O1_tf pmNm m > m u c W« c m 3 o ccc c m m L V m o c.wM. S u m m o o m- u m 0 c o J K t w w to a m 00 m m ri c m.N r o m p 3 m— m a € w of m o v m u o o a FE 2 tEo c 12 o af00"u H ri d D LL I IU U ¢ '0 d 6 8. Z O� O N N O O F r ri v ATTACHMENT "C" CHANGES AND AMENDMENTS TO STANDARD AGREEMENT Design Services for Traffic Signal Bid Package 2015-3 City Project No. 00005 There are no proposed changes to the Standard Agreement City of Fort Worth,Texas Attachment C PMO Release Date:05.19.2010 Page IofI Consulting Contract Schedule Specifications i'ORT WORTH City of Fort Worth Capital Improvement Program Attachment D - Project Schedule This PROTECT requires a Tier 3 sclwdule as defined herein acid in the Ci l's Schedule Guidance Docu men t. D1. CONSULTING SERVICES SCHEDULE DEVELOPMENT: The CONSULTANT shall prepare schedules for consulting services that meet the requirements described in this specification, showing by Critical Path Method (CPM) the planned sequence and timing of the Work associated with the Agreement. All submittals shall be submitted in PDF format, and schedule files shall also be submitted in native file format (i.e. file formats associated with the scheduling software). The approved scheduling software systems for creating the schedule files are: — Primavera (Version 6.1 or later or approved by CITY) — Primavera Contractor (Version 6.1 or later or approved by CITY) — Microsoft Project (Version 2003/2007 or later or approved by CITY)(PHASING OUT) D2. BASELINE CONSULTING SERVICES SCHEDULE: Following notice-to-proceed, the CONSULTANT shall develop, submit and review the draft detailed baseline consulting services schedule with the CITY to demonstrate the CONSULTANT's understanding of the Agreement requirements and approach for performing the work. The CONSULTANT will prepare the final detailed baseline consulting services schedule based on CITY comments, if any,and submit to the CITY no later than the submittal of the first project invoice. The following guidelines shall be adhered to in preparing the baseline schedule, and as described in further detail in the CITY's Schedule Guidance Document. a. The scope shall be subdivided by work breakdown structure (WBS) representing the tasks, subtasks,and activities associated with delivering the work. b. The schedule shall accurately describe the major work activities, key milestones, and dependencies/relationships as appropriate to the work. c. The schedule should include appropriate meetings, review periods, critical decision points,including third party utility dependencies and reviewing agencies. D3. PROGRESS CONSULTING SERVICES SCHEDULE: The CONSULTANT shall prepare and submit monthly to the CITY for approval the updated schedule in accordance with D1 and D2 and the CITY's Schedule Guidance Document inclusive. As the Work progresses, the CONSULTANT shall enter into the schedule and record actual progress as described in the CITY's Schedule Guidance Document. The updated schedule submittal shall also include a concise schedule narrative that highlights the following,if appropriate and applicable: • Changes in the critical path, • Expected schedule changes, • Potential delays, • Opportunities to expedite the schedule, • Coordination issues the CITY should be aware of or can assist with, City of Fort Worth,Texas Attachment D PMO Release Date:02.15.2011 Page 1 of 2 • Other schedule-related issues that the CONSULTANT wishes to communicate to the CITY. D4. PERFORMANCE AND CONSULTING SERVICES SCHEDULE: If the work accomplished falls behind that scheduled due to factors within the CONSULTANT's control, the CONSULTANT shall take such action as necessary to improve the progress of the Work. In addition, the CITY may require the CONSULTANT to submit a revised schedule demonstrating the proposed plan to make up the delay in schedule progress and to ensure completion of the Work within the allotted Agreement time. D5. SCHEDULE TIERS SPECIAL INSTRUCTIONS: The requirements for the schedule are determined based on the nature and needs of the project. The schedule tier for this project is stated at the top of this document. CONSULTANT shall submit each schedule relying on the CITY's current Schedule Guidance Document. D6. SCHEDULE SUBMITTAL AND PAYMENT: As stated in III.A.(1). of the Agreement, CONSULTANT shall provide the information required by Attachment D. CONSULTANT's monthly invoices will not be accepted and processed for payment without monthly schedule updates that are submitted in the time and manner required by Attachment D and the CITY's current Schedule Guidance Document. City of Fort Worth,Texas Attachment D PMO Release Date:02.15.2011 Page 2 of 2